xref: /openbmc/linux/drivers/iio/accel/mxc6255.c (revision 4cfb9080)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * MXC6255 - MEMSIC orientation sensing accelerometer
4  *
5  * Copyright (c) 2015, Intel Corporation.
6  *
7  * IIO driver for MXC6255 (7-bit I2C slave address 0x15).
8  */
9 
10 #include <linux/module.h>
11 #include <linux/i2c.h>
12 #include <linux/init.h>
13 #include <linux/iio/iio.h>
14 #include <linux/delay.h>
15 #include <linux/acpi.h>
16 #include <linux/regmap.h>
17 #include <linux/iio/sysfs.h>
18 
19 #define MXC6255_DRV_NAME		"mxc6255"
20 #define MXC6255_REGMAP_NAME		"mxc6255_regmap"
21 
22 #define MXC6255_REG_XOUT		0x00
23 #define MXC6255_REG_YOUT		0x01
24 #define MXC6255_REG_CHIP_ID		0x08
25 
26 #define MXC6255_CHIP_ID			0x05
27 
28 /*
29  * MXC6255 has only one measurement range: +/- 2G.
30  * The acceleration output is an 8-bit value.
31  *
32  * Scale is calculated as follows:
33  * (2 + 2) * 9.80665 / (2^8 - 1) = 0.153829
34  *
35  * Scale value for +/- 2G measurement range
36  */
37 #define MXC6255_SCALE			153829
38 
39 enum mxc6255_axis {
40 	AXIS_X,
41 	AXIS_Y,
42 };
43 
44 struct mxc6255_data {
45 	struct i2c_client *client;
46 	struct regmap *regmap;
47 };
48 
49 static int mxc6255_read_raw(struct iio_dev *indio_dev,
50 			    struct iio_chan_spec const *chan,
51 			    int *val, int *val2, long mask)
52 {
53 	struct mxc6255_data *data = iio_priv(indio_dev);
54 	unsigned int reg;
55 	int ret;
56 
57 	switch (mask) {
58 	case IIO_CHAN_INFO_RAW:
59 		ret = regmap_read(data->regmap, chan->address, &reg);
60 		if (ret < 0) {
61 			dev_err(&data->client->dev,
62 				"Error reading reg %lu\n", chan->address);
63 			return ret;
64 		}
65 
66 		*val = sign_extend32(reg, 7);
67 		return IIO_VAL_INT;
68 	case IIO_CHAN_INFO_SCALE:
69 		*val = 0;
70 		*val2 = MXC6255_SCALE;
71 		return IIO_VAL_INT_PLUS_MICRO;
72 	default:
73 		return -EINVAL;
74 	}
75 }
76 
77 static const struct iio_info mxc6255_info = {
78 	.read_raw	= mxc6255_read_raw,
79 };
80 
81 #define MXC6255_CHANNEL(_axis, reg) {				\
82 	.type = IIO_ACCEL,					\
83 	.modified = 1,						\
84 	.channel2 = IIO_MOD_##_axis,				\
85 	.address = reg,						\
86 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
87 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
88 }
89 
90 static const struct iio_chan_spec mxc6255_channels[] = {
91 	MXC6255_CHANNEL(X, MXC6255_REG_XOUT),
92 	MXC6255_CHANNEL(Y, MXC6255_REG_YOUT),
93 };
94 
95 static bool mxc6255_is_readable_reg(struct device *dev, unsigned int reg)
96 {
97 	switch (reg) {
98 	case MXC6255_REG_XOUT:
99 	case MXC6255_REG_YOUT:
100 	case MXC6255_REG_CHIP_ID:
101 		return true;
102 	default:
103 		return false;
104 	}
105 }
106 
107 static const struct regmap_config mxc6255_regmap_config = {
108 	.name = MXC6255_REGMAP_NAME,
109 
110 	.reg_bits = 8,
111 	.val_bits = 8,
112 
113 	.readable_reg = mxc6255_is_readable_reg,
114 };
115 
116 static int mxc6255_probe(struct i2c_client *client)
117 {
118 	struct mxc6255_data *data;
119 	struct iio_dev *indio_dev;
120 	struct regmap *regmap;
121 	unsigned int chip_id;
122 	int ret;
123 
124 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
125 	if (!indio_dev)
126 		return -ENOMEM;
127 
128 	regmap = devm_regmap_init_i2c(client, &mxc6255_regmap_config);
129 	if (IS_ERR(regmap)) {
130 		dev_err(&client->dev, "Error initializing regmap\n");
131 		return PTR_ERR(regmap);
132 	}
133 
134 	data = iio_priv(indio_dev);
135 	i2c_set_clientdata(client, indio_dev);
136 	data->client = client;
137 	data->regmap = regmap;
138 
139 	indio_dev->name = MXC6255_DRV_NAME;
140 	indio_dev->channels = mxc6255_channels;
141 	indio_dev->num_channels = ARRAY_SIZE(mxc6255_channels);
142 	indio_dev->modes = INDIO_DIRECT_MODE;
143 	indio_dev->info = &mxc6255_info;
144 
145 	ret = regmap_read(data->regmap, MXC6255_REG_CHIP_ID, &chip_id);
146 	if (ret < 0) {
147 		dev_err(&client->dev, "Error reading chip id %d\n", ret);
148 		return ret;
149 	}
150 
151 	if ((chip_id & 0x1f) != MXC6255_CHIP_ID) {
152 		dev_err(&client->dev, "Invalid chip id %x\n", chip_id);
153 		return -ENODEV;
154 	}
155 
156 	dev_dbg(&client->dev, "Chip id %x\n", chip_id);
157 
158 	ret = devm_iio_device_register(&client->dev, indio_dev);
159 	if (ret < 0) {
160 		dev_err(&client->dev, "Could not register IIO device\n");
161 		return ret;
162 	}
163 
164 	return 0;
165 }
166 
167 static const struct acpi_device_id mxc6255_acpi_match[] = {
168 	{"MXC6225",	0},
169 	{"MXC6255",	0},
170 	{ }
171 };
172 MODULE_DEVICE_TABLE(acpi, mxc6255_acpi_match);
173 
174 static const struct i2c_device_id mxc6255_id[] = {
175 	{"mxc6225",	0},
176 	{"mxc6255",	0},
177 	{ }
178 };
179 MODULE_DEVICE_TABLE(i2c, mxc6255_id);
180 
181 static struct i2c_driver mxc6255_driver = {
182 	.driver = {
183 		.name = MXC6255_DRV_NAME,
184 		.acpi_match_table = ACPI_PTR(mxc6255_acpi_match),
185 	},
186 	.probe		= mxc6255_probe,
187 	.id_table	= mxc6255_id,
188 };
189 
190 module_i2c_driver(mxc6255_driver);
191 
192 MODULE_AUTHOR("Teodora Baluta <teodora.baluta@intel.com>");
193 MODULE_DESCRIPTION("MEMSIC MXC6255 orientation sensing accelerometer driver");
194 MODULE_LICENSE("GPL v2");
195