xref: /openbmc/linux/drivers/iio/accel/mma9551.c (revision 293d5b43)
1 /*
2  * Freescale MMA9551L Intelligent Motion-Sensing Platform driver
3  * Copyright (c) 2014, Intel Corporation.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms and conditions of the GNU General Public License,
7  * version 2, as published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  */
14 
15 #include <linux/module.h>
16 #include <linux/i2c.h>
17 #include <linux/interrupt.h>
18 #include <linux/slab.h>
19 #include <linux/acpi.h>
20 #include <linux/delay.h>
21 #include <linux/gpio/consumer.h>
22 #include <linux/iio/iio.h>
23 #include <linux/iio/sysfs.h>
24 #include <linux/iio/events.h>
25 #include <linux/pm_runtime.h>
26 #include "mma9551_core.h"
27 
28 #define MMA9551_DRV_NAME		"mma9551"
29 #define MMA9551_IRQ_NAME		"mma9551_event"
30 #define MMA9551_GPIO_NAME		"mma9551_int"
31 #define MMA9551_GPIO_COUNT		4
32 
33 /* Tilt application (inclination in IIO terms). */
34 #define MMA9551_TILT_XZ_ANG_REG		0x00
35 #define MMA9551_TILT_YZ_ANG_REG		0x01
36 #define MMA9551_TILT_XY_ANG_REG		0x02
37 #define MMA9551_TILT_ANGFLG		BIT(7)
38 #define MMA9551_TILT_QUAD_REG		0x03
39 #define MMA9551_TILT_XY_QUAD_SHIFT	0
40 #define MMA9551_TILT_YZ_QUAD_SHIFT	2
41 #define MMA9551_TILT_XZ_QUAD_SHIFT	4
42 #define MMA9551_TILT_CFG_REG		0x01
43 #define MMA9551_TILT_ANG_THRESH_MASK	GENMASK(3, 0)
44 
45 #define MMA9551_DEFAULT_SAMPLE_RATE	122	/* Hz */
46 
47 /* Tilt events are mapped to the first three GPIO pins. */
48 enum mma9551_tilt_axis {
49 	mma9551_x = 0,
50 	mma9551_y,
51 	mma9551_z,
52 };
53 
54 struct mma9551_data {
55 	struct i2c_client *client;
56 	struct mutex mutex;
57 	int event_enabled[3];
58 	int irqs[MMA9551_GPIO_COUNT];
59 };
60 
61 static int mma9551_read_incli_chan(struct i2c_client *client,
62 				   const struct iio_chan_spec *chan,
63 				   int *val)
64 {
65 	u8 quad_shift, angle, quadrant;
66 	u16 reg_addr;
67 	int ret;
68 
69 	switch (chan->channel2) {
70 	case IIO_MOD_X:
71 		reg_addr = MMA9551_TILT_YZ_ANG_REG;
72 		quad_shift = MMA9551_TILT_YZ_QUAD_SHIFT;
73 		break;
74 	case IIO_MOD_Y:
75 		reg_addr = MMA9551_TILT_XZ_ANG_REG;
76 		quad_shift = MMA9551_TILT_XZ_QUAD_SHIFT;
77 		break;
78 	case IIO_MOD_Z:
79 		reg_addr = MMA9551_TILT_XY_ANG_REG;
80 		quad_shift = MMA9551_TILT_XY_QUAD_SHIFT;
81 		break;
82 	default:
83 		return -EINVAL;
84 	}
85 
86 	ret = mma9551_set_power_state(client, true);
87 	if (ret < 0)
88 		return ret;
89 
90 	ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT,
91 				       reg_addr, &angle);
92 	if (ret < 0)
93 		goto out_poweroff;
94 
95 	ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT,
96 				       MMA9551_TILT_QUAD_REG, &quadrant);
97 	if (ret < 0)
98 		goto out_poweroff;
99 
100 	angle &= ~MMA9551_TILT_ANGFLG;
101 	quadrant = (quadrant >> quad_shift) & 0x03;
102 
103 	if (quadrant == 1 || quadrant == 3)
104 		*val = 90 * (quadrant + 1) - angle;
105 	else
106 		*val = angle + 90 * quadrant;
107 
108 	ret = IIO_VAL_INT;
109 
110 out_poweroff:
111 	mma9551_set_power_state(client, false);
112 	return ret;
113 }
114 
115 static int mma9551_read_raw(struct iio_dev *indio_dev,
116 			    struct iio_chan_spec const *chan,
117 			    int *val, int *val2, long mask)
118 {
119 	struct mma9551_data *data = iio_priv(indio_dev);
120 	int ret;
121 
122 	switch (mask) {
123 	case IIO_CHAN_INFO_PROCESSED:
124 		switch (chan->type) {
125 		case IIO_INCLI:
126 			mutex_lock(&data->mutex);
127 			ret = mma9551_read_incli_chan(data->client, chan, val);
128 			mutex_unlock(&data->mutex);
129 			return ret;
130 		default:
131 			return -EINVAL;
132 		}
133 	case IIO_CHAN_INFO_RAW:
134 		switch (chan->type) {
135 		case IIO_ACCEL:
136 			mutex_lock(&data->mutex);
137 			ret = mma9551_read_accel_chan(data->client,
138 						      chan, val, val2);
139 			mutex_unlock(&data->mutex);
140 			return ret;
141 		default:
142 			return -EINVAL;
143 		}
144 	case IIO_CHAN_INFO_SCALE:
145 		switch (chan->type) {
146 		case IIO_ACCEL:
147 			return mma9551_read_accel_scale(val, val2);
148 		default:
149 			return -EINVAL;
150 		}
151 	default:
152 		return -EINVAL;
153 	}
154 }
155 
156 static int mma9551_read_event_config(struct iio_dev *indio_dev,
157 				     const struct iio_chan_spec *chan,
158 				     enum iio_event_type type,
159 				     enum iio_event_direction dir)
160 {
161 	struct mma9551_data *data = iio_priv(indio_dev);
162 
163 	switch (chan->type) {
164 	case IIO_INCLI:
165 		/* IIO counts axes from 1, because IIO_NO_MOD is 0. */
166 		return data->event_enabled[chan->channel2 - 1];
167 	default:
168 		return -EINVAL;
169 	}
170 }
171 
172 static int mma9551_config_incli_event(struct iio_dev *indio_dev,
173 				      enum iio_modifier axis,
174 				      int state)
175 {
176 	struct mma9551_data *data = iio_priv(indio_dev);
177 	enum mma9551_tilt_axis mma_axis;
178 	int ret;
179 
180 	/* IIO counts axes from 1, because IIO_NO_MOD is 0. */
181 	mma_axis = axis - 1;
182 
183 	if (data->event_enabled[mma_axis] == state)
184 		return 0;
185 
186 	if (state == 0) {
187 		ret = mma9551_gpio_config(data->client,
188 					  (enum mma9551_gpio_pin)mma_axis,
189 					  MMA9551_APPID_NONE, 0, 0);
190 		if (ret < 0)
191 			return ret;
192 
193 		ret = mma9551_set_power_state(data->client, false);
194 		if (ret < 0)
195 			return ret;
196 	} else {
197 		int bitnum;
198 
199 		/* Bit 7 of each angle register holds the angle flag. */
200 		switch (axis) {
201 		case IIO_MOD_X:
202 			bitnum = 7 + 8 * MMA9551_TILT_YZ_ANG_REG;
203 			break;
204 		case IIO_MOD_Y:
205 			bitnum = 7 + 8 * MMA9551_TILT_XZ_ANG_REG;
206 			break;
207 		case IIO_MOD_Z:
208 			bitnum = 7 + 8 * MMA9551_TILT_XY_ANG_REG;
209 			break;
210 		default:
211 			return -EINVAL;
212 		}
213 
214 
215 		ret = mma9551_set_power_state(data->client, true);
216 		if (ret < 0)
217 			return ret;
218 
219 		ret = mma9551_gpio_config(data->client,
220 					  (enum mma9551_gpio_pin)mma_axis,
221 					  MMA9551_APPID_TILT, bitnum, 0);
222 		if (ret < 0) {
223 			mma9551_set_power_state(data->client, false);
224 			return ret;
225 		}
226 	}
227 
228 	data->event_enabled[mma_axis] = state;
229 
230 	return ret;
231 }
232 
233 static int mma9551_write_event_config(struct iio_dev *indio_dev,
234 				      const struct iio_chan_spec *chan,
235 				      enum iio_event_type type,
236 				      enum iio_event_direction dir,
237 				      int state)
238 {
239 	struct mma9551_data *data = iio_priv(indio_dev);
240 	int ret;
241 
242 	switch (chan->type) {
243 	case IIO_INCLI:
244 		mutex_lock(&data->mutex);
245 		ret = mma9551_config_incli_event(indio_dev,
246 						 chan->channel2, state);
247 		mutex_unlock(&data->mutex);
248 		return ret;
249 	default:
250 		return -EINVAL;
251 	}
252 }
253 
254 static int mma9551_write_event_value(struct iio_dev *indio_dev,
255 				     const struct iio_chan_spec *chan,
256 				     enum iio_event_type type,
257 				     enum iio_event_direction dir,
258 				     enum iio_event_info info,
259 				     int val, int val2)
260 {
261 	struct mma9551_data *data = iio_priv(indio_dev);
262 	int ret;
263 
264 	switch (chan->type) {
265 	case IIO_INCLI:
266 		if (val2 != 0 || val < 1 || val > 10)
267 			return -EINVAL;
268 		mutex_lock(&data->mutex);
269 		ret = mma9551_update_config_bits(data->client,
270 						 MMA9551_APPID_TILT,
271 						 MMA9551_TILT_CFG_REG,
272 						 MMA9551_TILT_ANG_THRESH_MASK,
273 						 val);
274 		mutex_unlock(&data->mutex);
275 		return ret;
276 	default:
277 		return -EINVAL;
278 	}
279 }
280 
281 static int mma9551_read_event_value(struct iio_dev *indio_dev,
282 				    const struct iio_chan_spec *chan,
283 				    enum iio_event_type type,
284 				    enum iio_event_direction dir,
285 				    enum iio_event_info info,
286 				    int *val, int *val2)
287 {
288 	struct mma9551_data *data = iio_priv(indio_dev);
289 	int ret;
290 	u8 tmp;
291 
292 	switch (chan->type) {
293 	case IIO_INCLI:
294 		mutex_lock(&data->mutex);
295 		ret = mma9551_read_config_byte(data->client,
296 					       MMA9551_APPID_TILT,
297 					       MMA9551_TILT_CFG_REG, &tmp);
298 		mutex_unlock(&data->mutex);
299 		if (ret < 0)
300 			return ret;
301 		*val = tmp & MMA9551_TILT_ANG_THRESH_MASK;
302 		*val2 = 0;
303 		return IIO_VAL_INT;
304 	default:
305 		return -EINVAL;
306 	}
307 }
308 
309 static const struct iio_event_spec mma9551_incli_event = {
310 	.type = IIO_EV_TYPE_ROC,
311 	.dir = IIO_EV_DIR_RISING,
312 	.mask_separate = BIT(IIO_EV_INFO_ENABLE),
313 	.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE),
314 };
315 
316 #define MMA9551_INCLI_CHANNEL(axis) {				\
317 	.type = IIO_INCLI,					\
318 	.modified = 1,						\
319 	.channel2 = axis,					\
320 	.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),	\
321 	.event_spec = &mma9551_incli_event,			\
322 	.num_event_specs = 1,					\
323 }
324 
325 static const struct iio_chan_spec mma9551_channels[] = {
326 	MMA9551_ACCEL_CHANNEL(IIO_MOD_X),
327 	MMA9551_ACCEL_CHANNEL(IIO_MOD_Y),
328 	MMA9551_ACCEL_CHANNEL(IIO_MOD_Z),
329 
330 	MMA9551_INCLI_CHANNEL(IIO_MOD_X),
331 	MMA9551_INCLI_CHANNEL(IIO_MOD_Y),
332 	MMA9551_INCLI_CHANNEL(IIO_MOD_Z),
333 };
334 
335 static const struct iio_info mma9551_info = {
336 	.driver_module = THIS_MODULE,
337 	.read_raw = mma9551_read_raw,
338 	.read_event_config = mma9551_read_event_config,
339 	.write_event_config = mma9551_write_event_config,
340 	.read_event_value = mma9551_read_event_value,
341 	.write_event_value = mma9551_write_event_value,
342 };
343 
344 static irqreturn_t mma9551_event_handler(int irq, void *private)
345 {
346 	struct iio_dev *indio_dev = private;
347 	struct mma9551_data *data = iio_priv(indio_dev);
348 	int i, ret, mma_axis = -1;
349 	u16 reg;
350 	u8 val;
351 
352 	mutex_lock(&data->mutex);
353 
354 	for (i = 0; i < 3; i++)
355 		if (irq == data->irqs[i]) {
356 			mma_axis = i;
357 			break;
358 		}
359 
360 	if (mma_axis == -1) {
361 		/* IRQ was triggered on 4th line, which we don't use. */
362 		dev_warn(&data->client->dev,
363 			 "irq triggered on unused line %d\n", data->irqs[3]);
364 		goto out;
365 	}
366 
367 	switch (mma_axis) {
368 	case mma9551_x:
369 		reg = MMA9551_TILT_YZ_ANG_REG;
370 		break;
371 	case mma9551_y:
372 		reg = MMA9551_TILT_XZ_ANG_REG;
373 		break;
374 	case mma9551_z:
375 		reg = MMA9551_TILT_XY_ANG_REG;
376 		break;
377 	}
378 
379 	/*
380 	 * Read the angle even though we don't use it, otherwise we
381 	 * won't get any further interrupts.
382 	 */
383 	ret = mma9551_read_status_byte(data->client, MMA9551_APPID_TILT,
384 				       reg, &val);
385 	if (ret < 0) {
386 		dev_err(&data->client->dev,
387 			"error %d reading tilt register in IRQ\n", ret);
388 		goto out;
389 	}
390 
391 	iio_push_event(indio_dev,
392 		       IIO_MOD_EVENT_CODE(IIO_INCLI, 0, (mma_axis + 1),
393 					  IIO_EV_TYPE_ROC, IIO_EV_DIR_RISING),
394 		       iio_get_time_ns(indio_dev));
395 
396 out:
397 	mutex_unlock(&data->mutex);
398 
399 	return IRQ_HANDLED;
400 }
401 
402 static int mma9551_init(struct mma9551_data *data)
403 {
404 	int ret;
405 
406 	ret = mma9551_read_version(data->client);
407 	if (ret)
408 		return ret;
409 
410 	return mma9551_set_device_state(data->client, true);
411 }
412 
413 static int mma9551_gpio_probe(struct iio_dev *indio_dev)
414 {
415 	struct gpio_desc *gpio;
416 	int i, ret;
417 	struct mma9551_data *data = iio_priv(indio_dev);
418 	struct device *dev = &data->client->dev;
419 
420 	for (i = 0; i < MMA9551_GPIO_COUNT; i++) {
421 		gpio = devm_gpiod_get_index(dev, MMA9551_GPIO_NAME, i,
422 					    GPIOD_IN);
423 		if (IS_ERR(gpio)) {
424 			dev_err(dev, "acpi gpio get index failed\n");
425 			return PTR_ERR(gpio);
426 		}
427 
428 		ret = gpiod_to_irq(gpio);
429 		if (ret < 0)
430 			return ret;
431 
432 		data->irqs[i] = ret;
433 		ret = devm_request_threaded_irq(dev, data->irqs[i],
434 				NULL, mma9551_event_handler,
435 				IRQF_TRIGGER_RISING | IRQF_ONESHOT,
436 				MMA9551_IRQ_NAME, indio_dev);
437 		if (ret < 0) {
438 			dev_err(dev, "request irq %d failed\n", data->irqs[i]);
439 			return ret;
440 		}
441 
442 		dev_dbg(dev, "gpio resource, no:%d irq:%d\n",
443 			desc_to_gpio(gpio), data->irqs[i]);
444 	}
445 
446 	return 0;
447 }
448 
449 static const char *mma9551_match_acpi_device(struct device *dev)
450 {
451 	const struct acpi_device_id *id;
452 
453 	id = acpi_match_device(dev->driver->acpi_match_table, dev);
454 	if (!id)
455 		return NULL;
456 
457 	return dev_name(dev);
458 }
459 
460 static int mma9551_probe(struct i2c_client *client,
461 			 const struct i2c_device_id *id)
462 {
463 	struct mma9551_data *data;
464 	struct iio_dev *indio_dev;
465 	const char *name = NULL;
466 	int ret;
467 
468 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
469 	if (!indio_dev)
470 		return -ENOMEM;
471 
472 	data = iio_priv(indio_dev);
473 	i2c_set_clientdata(client, indio_dev);
474 	data->client = client;
475 
476 	if (id)
477 		name = id->name;
478 	else if (ACPI_HANDLE(&client->dev))
479 		name = mma9551_match_acpi_device(&client->dev);
480 
481 	ret = mma9551_init(data);
482 	if (ret < 0)
483 		return ret;
484 
485 	mutex_init(&data->mutex);
486 
487 	indio_dev->dev.parent = &client->dev;
488 	indio_dev->channels = mma9551_channels;
489 	indio_dev->num_channels = ARRAY_SIZE(mma9551_channels);
490 	indio_dev->name = name;
491 	indio_dev->modes = INDIO_DIRECT_MODE;
492 	indio_dev->info = &mma9551_info;
493 
494 	ret = mma9551_gpio_probe(indio_dev);
495 	if (ret < 0)
496 		goto out_poweroff;
497 
498 	ret = pm_runtime_set_active(&client->dev);
499 	if (ret < 0)
500 		goto out_poweroff;
501 
502 	pm_runtime_enable(&client->dev);
503 	pm_runtime_set_autosuspend_delay(&client->dev,
504 					 MMA9551_AUTO_SUSPEND_DELAY_MS);
505 	pm_runtime_use_autosuspend(&client->dev);
506 
507 	ret = iio_device_register(indio_dev);
508 	if (ret < 0) {
509 		dev_err(&client->dev, "unable to register iio device\n");
510 		goto out_poweroff;
511 	}
512 
513 	return 0;
514 
515 out_poweroff:
516 	mma9551_set_device_state(client, false);
517 
518 	return ret;
519 }
520 
521 static int mma9551_remove(struct i2c_client *client)
522 {
523 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
524 	struct mma9551_data *data = iio_priv(indio_dev);
525 
526 	iio_device_unregister(indio_dev);
527 
528 	pm_runtime_disable(&client->dev);
529 	pm_runtime_set_suspended(&client->dev);
530 	pm_runtime_put_noidle(&client->dev);
531 
532 	mutex_lock(&data->mutex);
533 	mma9551_set_device_state(data->client, false);
534 	mutex_unlock(&data->mutex);
535 
536 	return 0;
537 }
538 
539 #ifdef CONFIG_PM
540 static int mma9551_runtime_suspend(struct device *dev)
541 {
542 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
543 	struct mma9551_data *data = iio_priv(indio_dev);
544 	int ret;
545 
546 	mutex_lock(&data->mutex);
547 	ret = mma9551_set_device_state(data->client, false);
548 	mutex_unlock(&data->mutex);
549 	if (ret < 0) {
550 		dev_err(&data->client->dev, "powering off device failed\n");
551 		return -EAGAIN;
552 	}
553 
554 	return 0;
555 }
556 
557 static int mma9551_runtime_resume(struct device *dev)
558 {
559 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
560 	struct mma9551_data *data = iio_priv(indio_dev);
561 	int ret;
562 
563 	ret = mma9551_set_device_state(data->client, true);
564 	if (ret < 0)
565 		return ret;
566 
567 	mma9551_sleep(MMA9551_DEFAULT_SAMPLE_RATE);
568 
569 	return 0;
570 }
571 #endif
572 
573 #ifdef CONFIG_PM_SLEEP
574 static int mma9551_suspend(struct device *dev)
575 {
576 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
577 	struct mma9551_data *data = iio_priv(indio_dev);
578 	int ret;
579 
580 	mutex_lock(&data->mutex);
581 	ret = mma9551_set_device_state(data->client, false);
582 	mutex_unlock(&data->mutex);
583 
584 	return ret;
585 }
586 
587 static int mma9551_resume(struct device *dev)
588 {
589 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
590 	struct mma9551_data *data = iio_priv(indio_dev);
591 	int ret;
592 
593 	mutex_lock(&data->mutex);
594 	ret = mma9551_set_device_state(data->client, true);
595 	mutex_unlock(&data->mutex);
596 
597 	return ret;
598 }
599 #endif
600 
601 static const struct dev_pm_ops mma9551_pm_ops = {
602 	SET_SYSTEM_SLEEP_PM_OPS(mma9551_suspend, mma9551_resume)
603 	SET_RUNTIME_PM_OPS(mma9551_runtime_suspend,
604 			   mma9551_runtime_resume, NULL)
605 };
606 
607 static const struct acpi_device_id mma9551_acpi_match[] = {
608 	{"MMA9551", 0},
609 	{},
610 };
611 
612 MODULE_DEVICE_TABLE(acpi, mma9551_acpi_match);
613 
614 static const struct i2c_device_id mma9551_id[] = {
615 	{"mma9551", 0},
616 	{}
617 };
618 
619 MODULE_DEVICE_TABLE(i2c, mma9551_id);
620 
621 static struct i2c_driver mma9551_driver = {
622 	.driver = {
623 		   .name = MMA9551_DRV_NAME,
624 		   .acpi_match_table = ACPI_PTR(mma9551_acpi_match),
625 		   .pm = &mma9551_pm_ops,
626 		   },
627 	.probe = mma9551_probe,
628 	.remove = mma9551_remove,
629 	.id_table = mma9551_id,
630 };
631 
632 module_i2c_driver(mma9551_driver);
633 
634 MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>");
635 MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
636 MODULE_LICENSE("GPL v2");
637 MODULE_DESCRIPTION("MMA9551L motion-sensing platform driver");
638