1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * KXCJK-1013 3-axis accelerometer driver 4 * Copyright (c) 2014, Intel Corporation. 5 */ 6 7 #include <linux/module.h> 8 #include <linux/i2c.h> 9 #include <linux/interrupt.h> 10 #include <linux/delay.h> 11 #include <linux/bitops.h> 12 #include <linux/slab.h> 13 #include <linux/string.h> 14 #include <linux/acpi.h> 15 #include <linux/pm.h> 16 #include <linux/pm_runtime.h> 17 #include <linux/regulator/consumer.h> 18 #include <linux/iio/iio.h> 19 #include <linux/iio/sysfs.h> 20 #include <linux/iio/buffer.h> 21 #include <linux/iio/trigger.h> 22 #include <linux/iio/events.h> 23 #include <linux/iio/trigger_consumer.h> 24 #include <linux/iio/triggered_buffer.h> 25 #include <linux/iio/accel/kxcjk_1013.h> 26 27 #define KXCJK1013_DRV_NAME "kxcjk1013" 28 #define KXCJK1013_IRQ_NAME "kxcjk1013_event" 29 30 #define KXTF9_REG_HP_XOUT_L 0x00 31 #define KXTF9_REG_HP_XOUT_H 0x01 32 #define KXTF9_REG_HP_YOUT_L 0x02 33 #define KXTF9_REG_HP_YOUT_H 0x03 34 #define KXTF9_REG_HP_ZOUT_L 0x04 35 #define KXTF9_REG_HP_ZOUT_H 0x05 36 37 #define KXCJK1013_REG_XOUT_L 0x06 38 /* 39 * From low byte X axis register, all the other addresses of Y and Z can be 40 * obtained by just applying axis offset. The following axis defines are just 41 * provide clarity, but not used. 42 */ 43 #define KXCJK1013_REG_XOUT_H 0x07 44 #define KXCJK1013_REG_YOUT_L 0x08 45 #define KXCJK1013_REG_YOUT_H 0x09 46 #define KXCJK1013_REG_ZOUT_L 0x0A 47 #define KXCJK1013_REG_ZOUT_H 0x0B 48 49 #define KXCJK1013_REG_DCST_RESP 0x0C 50 #define KXCJK1013_REG_WHO_AM_I 0x0F 51 #define KXTF9_REG_TILT_POS_CUR 0x10 52 #define KXTF9_REG_TILT_POS_PREV 0x11 53 #define KXTF9_REG_INT_SRC1 0x15 54 #define KXTF9_REG_INT_SRC2 0x16 55 #define KXCJK1013_REG_INT_SRC1 0x16 56 #define KXCJK1013_REG_INT_SRC2 0x17 57 #define KXCJK1013_REG_STATUS_REG 0x18 58 #define KXCJK1013_REG_INT_REL 0x1A 59 #define KXCJK1013_REG_CTRL1 0x1B 60 #define KXTF9_REG_CTRL2 0x1C 61 #define KXTF9_REG_CTRL3 0x1D 62 #define KXCJK1013_REG_CTRL2 0x1D 63 #define KXCJK1013_REG_INT_CTRL1 0x1E 64 #define KXCJK1013_REG_INT_CTRL2 0x1F 65 #define KXTF9_REG_INT_CTRL3 0x20 66 #define KXCJK1013_REG_DATA_CTRL 0x21 67 #define KXTF9_REG_TILT_TIMER 0x28 68 #define KXCJK1013_REG_WAKE_TIMER 0x29 69 #define KXTF9_REG_TDT_TIMER 0x2B 70 #define KXTF9_REG_TDT_THRESH_H 0x2C 71 #define KXTF9_REG_TDT_THRESH_L 0x2D 72 #define KXTF9_REG_TDT_TAP_TIMER 0x2E 73 #define KXTF9_REG_TDT_TOTAL_TIMER 0x2F 74 #define KXTF9_REG_TDT_LATENCY_TIMER 0x30 75 #define KXTF9_REG_TDT_WINDOW_TIMER 0x31 76 #define KXCJK1013_REG_SELF_TEST 0x3A 77 #define KXTF9_REG_WAKE_THRESH 0x5A 78 #define KXTF9_REG_TILT_ANGLE 0x5C 79 #define KXTF9_REG_HYST_SET 0x5F 80 #define KXCJK1013_REG_WAKE_THRES 0x6A 81 82 /* Everything up to 0x11 is equal to KXCJK1013/KXTF9 above */ 83 #define KX023_REG_INS1 0x12 84 #define KX023_REG_INS2 0x13 85 #define KX023_REG_INS3 0x14 86 #define KX023_REG_STAT 0x15 87 #define KX023_REG_INT_REL 0x17 88 #define KX023_REG_CNTL1 0x18 89 #define KX023_REG_CNTL2 0x19 90 #define KX023_REG_CNTL3 0x1A 91 #define KX023_REG_ODCNTL 0x1B 92 #define KX023_REG_INC1 0x1C 93 #define KX023_REG_INC2 0x1D 94 #define KX023_REG_INC3 0x1E 95 #define KX023_REG_INC4 0x1F 96 #define KX023_REG_INC5 0x20 97 #define KX023_REG_INC6 0x21 98 #define KX023_REG_TILT_TIMER 0x22 99 #define KX023_REG_WUFC 0x23 100 #define KX023_REG_TDTRC 0x24 101 #define KX023_REG_TDTC 0x25 102 #define KX023_REG_TTH 0x26 103 #define KX023_REG_TTL 0x27 104 #define KX023_REG_FTD 0x28 105 #define KX023_REG_STD 0x29 106 #define KX023_REG_TLT 0x2A 107 #define KX023_REG_TWS 0x2B 108 #define KX023_REG_ATH 0x30 109 #define KX023_REG_TILT_ANGLE_LL 0x32 110 #define KX023_REG_TILT_ANGLE_HL 0x33 111 #define KX023_REG_HYST_SET 0x34 112 #define KX023_REG_LP_CNTL 0x35 113 #define KX023_REG_BUF_CNTL1 0x3A 114 #define KX023_REG_BUF_CNTL2 0x3B 115 #define KX023_REG_BUF_STATUS_1 0x3C 116 #define KX023_REG_BUF_STATUS_2 0x3D 117 #define KX023_REG_BUF_CLEAR 0x3E 118 #define KX023_REG_BUF_READ 0x3F 119 #define KX023_REG_SELF_TEST 0x60 120 121 #define KXCJK1013_REG_CTRL1_BIT_PC1 BIT(7) 122 #define KXCJK1013_REG_CTRL1_BIT_RES BIT(6) 123 #define KXCJK1013_REG_CTRL1_BIT_DRDY BIT(5) 124 #define KXCJK1013_REG_CTRL1_BIT_GSEL1 BIT(4) 125 #define KXCJK1013_REG_CTRL1_BIT_GSEL0 BIT(3) 126 #define KXCJK1013_REG_CTRL1_BIT_WUFE BIT(1) 127 128 #define KXCJK1013_REG_INT_CTRL1_BIT_IEU BIT(2) /* KXTF9 */ 129 #define KXCJK1013_REG_INT_CTRL1_BIT_IEL BIT(3) 130 #define KXCJK1013_REG_INT_CTRL1_BIT_IEA BIT(4) 131 #define KXCJK1013_REG_INT_CTRL1_BIT_IEN BIT(5) 132 133 #define KXTF9_REG_TILT_BIT_LEFT_EDGE BIT(5) 134 #define KXTF9_REG_TILT_BIT_RIGHT_EDGE BIT(4) 135 #define KXTF9_REG_TILT_BIT_LOWER_EDGE BIT(3) 136 #define KXTF9_REG_TILT_BIT_UPPER_EDGE BIT(2) 137 #define KXTF9_REG_TILT_BIT_FACE_DOWN BIT(1) 138 #define KXTF9_REG_TILT_BIT_FACE_UP BIT(0) 139 140 #define KXCJK1013_DATA_MASK_12_BIT 0x0FFF 141 #define KXCJK1013_MAX_STARTUP_TIME_US 100000 142 143 #define KXCJK1013_SLEEP_DELAY_MS 2000 144 145 #define KXCJK1013_REG_INT_SRC1_BIT_TPS BIT(0) /* KXTF9 */ 146 #define KXCJK1013_REG_INT_SRC1_BIT_WUFS BIT(1) 147 #define KXCJK1013_REG_INT_SRC1_MASK_TDTS (BIT(2) | BIT(3)) /* KXTF9 */ 148 #define KXCJK1013_REG_INT_SRC1_TAP_NONE 0 149 #define KXCJK1013_REG_INT_SRC1_TAP_SINGLE BIT(2) 150 #define KXCJK1013_REG_INT_SRC1_TAP_DOUBLE BIT(3) 151 #define KXCJK1013_REG_INT_SRC1_BIT_DRDY BIT(4) 152 153 /* KXCJK: INT_SOURCE2: motion detect, KXTF9: INT_SRC_REG1: tap detect */ 154 #define KXCJK1013_REG_INT_SRC2_BIT_ZP BIT(0) 155 #define KXCJK1013_REG_INT_SRC2_BIT_ZN BIT(1) 156 #define KXCJK1013_REG_INT_SRC2_BIT_YP BIT(2) 157 #define KXCJK1013_REG_INT_SRC2_BIT_YN BIT(3) 158 #define KXCJK1013_REG_INT_SRC2_BIT_XP BIT(4) 159 #define KXCJK1013_REG_INT_SRC2_BIT_XN BIT(5) 160 161 /* KX023 interrupt routing to INT1. INT2 can be configured with INC6 */ 162 #define KX023_REG_INC4_BFI1 BIT(6) 163 #define KX023_REG_INC4_WMI1 BIT(5) 164 #define KX023_REG_INC4_DRDY1 BIT(4) 165 #define KX023_REG_INC4_TDTI1 BIT(2) 166 #define KX023_REG_INC4_WUFI1 BIT(1) 167 #define KX023_REG_INC4_TPI1 BIT(0) 168 169 #define KXCJK1013_DEFAULT_WAKE_THRES 1 170 171 enum kx_chipset { 172 KXCJK1013, 173 KXCJ91008, 174 KXTJ21009, 175 KXTF9, 176 KX0231025, 177 KX_MAX_CHIPS /* this must be last */ 178 }; 179 180 enum kx_acpi_type { 181 ACPI_GENERIC, 182 ACPI_SMO8500, 183 ACPI_KIOX010A, 184 }; 185 186 struct kx_chipset_regs { 187 u8 int_src1; 188 u8 int_src2; 189 u8 int_rel; 190 u8 ctrl1; 191 u8 wuf_ctrl; 192 u8 int_ctrl1; 193 u8 data_ctrl; 194 u8 wake_timer; 195 u8 wake_thres; 196 }; 197 198 static const struct kx_chipset_regs kxcjk1013_regs = { 199 .int_src1 = KXCJK1013_REG_INT_SRC1, 200 .int_src2 = KXCJK1013_REG_INT_SRC2, 201 .int_rel = KXCJK1013_REG_INT_REL, 202 .ctrl1 = KXCJK1013_REG_CTRL1, 203 .wuf_ctrl = KXCJK1013_REG_CTRL2, 204 .int_ctrl1 = KXCJK1013_REG_INT_CTRL1, 205 .data_ctrl = KXCJK1013_REG_DATA_CTRL, 206 .wake_timer = KXCJK1013_REG_WAKE_TIMER, 207 .wake_thres = KXCJK1013_REG_WAKE_THRES, 208 }; 209 210 static const struct kx_chipset_regs kxtf9_regs = { 211 /* .int_src1 was moved to INT_SRC2 on KXTF9 */ 212 .int_src1 = KXTF9_REG_INT_SRC2, 213 /* .int_src2 is not available */ 214 .int_rel = KXCJK1013_REG_INT_REL, 215 .ctrl1 = KXCJK1013_REG_CTRL1, 216 .wuf_ctrl = KXTF9_REG_CTRL3, 217 .int_ctrl1 = KXCJK1013_REG_INT_CTRL1, 218 .data_ctrl = KXCJK1013_REG_DATA_CTRL, 219 .wake_timer = KXCJK1013_REG_WAKE_TIMER, 220 .wake_thres = KXTF9_REG_WAKE_THRESH, 221 }; 222 223 /* The registers have totally different names but the bits are compatible */ 224 static const struct kx_chipset_regs kx0231025_regs = { 225 .int_src1 = KX023_REG_INS2, 226 .int_src2 = KX023_REG_INS3, 227 .int_rel = KX023_REG_INT_REL, 228 .ctrl1 = KX023_REG_CNTL1, 229 .wuf_ctrl = KX023_REG_CNTL3, 230 .int_ctrl1 = KX023_REG_INC1, 231 .data_ctrl = KX023_REG_ODCNTL, 232 .wake_timer = KX023_REG_WUFC, 233 .wake_thres = KX023_REG_ATH, 234 }; 235 236 enum kxcjk1013_axis { 237 AXIS_X, 238 AXIS_Y, 239 AXIS_Z, 240 AXIS_MAX 241 }; 242 243 struct kxcjk1013_data { 244 struct i2c_client *client; 245 struct iio_trigger *dready_trig; 246 struct iio_trigger *motion_trig; 247 struct iio_mount_matrix orientation; 248 struct mutex mutex; 249 /* Ensure timestamp naturally aligned */ 250 struct { 251 s16 chans[AXIS_MAX]; 252 s64 timestamp __aligned(8); 253 } scan; 254 u8 odr_bits; 255 u8 range; 256 int wake_thres; 257 int wake_dur; 258 bool active_high_intr; 259 bool dready_trigger_on; 260 int ev_enable_state; 261 bool motion_trigger_on; 262 int64_t timestamp; 263 enum kx_chipset chipset; 264 enum kx_acpi_type acpi_type; 265 const struct kx_chipset_regs *regs; 266 }; 267 268 enum kxcjk1013_mode { 269 STANDBY, 270 OPERATION, 271 }; 272 273 enum kxcjk1013_range { 274 KXCJK1013_RANGE_2G, 275 KXCJK1013_RANGE_4G, 276 KXCJK1013_RANGE_8G, 277 }; 278 279 struct kx_odr_map { 280 int val; 281 int val2; 282 int odr_bits; 283 int wuf_bits; 284 }; 285 286 static const struct kx_odr_map samp_freq_table[] = { 287 { 0, 781000, 0x08, 0x00 }, 288 { 1, 563000, 0x09, 0x01 }, 289 { 3, 125000, 0x0A, 0x02 }, 290 { 6, 250000, 0x0B, 0x03 }, 291 { 12, 500000, 0x00, 0x04 }, 292 { 25, 0, 0x01, 0x05 }, 293 { 50, 0, 0x02, 0x06 }, 294 { 100, 0, 0x03, 0x06 }, 295 { 200, 0, 0x04, 0x06 }, 296 { 400, 0, 0x05, 0x06 }, 297 { 800, 0, 0x06, 0x06 }, 298 { 1600, 0, 0x07, 0x06 }, 299 }; 300 301 static const char *const kxcjk1013_samp_freq_avail = 302 "0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800 1600"; 303 304 static const struct kx_odr_map kxtf9_samp_freq_table[] = { 305 { 25, 0, 0x01, 0x00 }, 306 { 50, 0, 0x02, 0x01 }, 307 { 100, 0, 0x03, 0x01 }, 308 { 200, 0, 0x04, 0x01 }, 309 { 400, 0, 0x05, 0x01 }, 310 { 800, 0, 0x06, 0x01 }, 311 }; 312 313 static const char *const kxtf9_samp_freq_avail = 314 "25 50 100 200 400 800"; 315 316 /* Refer to section 4 of the specification */ 317 static __maybe_unused const struct { 318 int odr_bits; 319 int usec; 320 } odr_start_up_times[KX_MAX_CHIPS][12] = { 321 /* KXCJK-1013 */ 322 { 323 {0x08, 100000}, 324 {0x09, 100000}, 325 {0x0A, 100000}, 326 {0x0B, 100000}, 327 {0, 80000}, 328 {0x01, 41000}, 329 {0x02, 21000}, 330 {0x03, 11000}, 331 {0x04, 6400}, 332 {0x05, 3900}, 333 {0x06, 2700}, 334 {0x07, 2100}, 335 }, 336 /* KXCJ9-1008 */ 337 { 338 {0x08, 100000}, 339 {0x09, 100000}, 340 {0x0A, 100000}, 341 {0x0B, 100000}, 342 {0, 80000}, 343 {0x01, 41000}, 344 {0x02, 21000}, 345 {0x03, 11000}, 346 {0x04, 6400}, 347 {0x05, 3900}, 348 {0x06, 2700}, 349 {0x07, 2100}, 350 }, 351 /* KXCTJ2-1009 */ 352 { 353 {0x08, 1240000}, 354 {0x09, 621000}, 355 {0x0A, 309000}, 356 {0x0B, 151000}, 357 {0, 80000}, 358 {0x01, 41000}, 359 {0x02, 21000}, 360 {0x03, 11000}, 361 {0x04, 6000}, 362 {0x05, 4000}, 363 {0x06, 3000}, 364 {0x07, 2000}, 365 }, 366 /* KXTF9 */ 367 { 368 {0x01, 81000}, 369 {0x02, 41000}, 370 {0x03, 21000}, 371 {0x04, 11000}, 372 {0x05, 5100}, 373 {0x06, 2700}, 374 }, 375 /* KX023-1025 */ 376 { 377 /* First 4 are not in datasheet, taken from KXCTJ2-1009 */ 378 {0x08, 1240000}, 379 {0x09, 621000}, 380 {0x0A, 309000}, 381 {0x0B, 151000}, 382 {0, 81000}, 383 {0x01, 40000}, 384 {0x02, 22000}, 385 {0x03, 12000}, 386 {0x04, 7000}, 387 {0x05, 4400}, 388 {0x06, 3000}, 389 {0x07, 3000}, 390 }, 391 }; 392 393 static const struct { 394 u16 scale; 395 u8 gsel_0; 396 u8 gsel_1; 397 } KXCJK1013_scale_table[] = { {9582, 0, 0}, 398 {19163, 1, 0}, 399 {38326, 0, 1} }; 400 401 #ifdef CONFIG_ACPI 402 enum kiox010a_fn_index { 403 KIOX010A_SET_LAPTOP_MODE = 1, 404 KIOX010A_SET_TABLET_MODE = 2, 405 }; 406 407 static int kiox010a_dsm(struct device *dev, int fn_index) 408 { 409 acpi_handle handle = ACPI_HANDLE(dev); 410 guid_t kiox010a_dsm_guid; 411 union acpi_object *obj; 412 413 if (!handle) 414 return -ENODEV; 415 416 guid_parse("1f339696-d475-4e26-8cad-2e9f8e6d7a91", &kiox010a_dsm_guid); 417 418 obj = acpi_evaluate_dsm(handle, &kiox010a_dsm_guid, 1, fn_index, NULL); 419 if (!obj) 420 return -EIO; 421 422 ACPI_FREE(obj); 423 return 0; 424 } 425 #endif 426 427 static int kxcjk1013_set_mode(struct kxcjk1013_data *data, 428 enum kxcjk1013_mode mode) 429 { 430 int ret; 431 432 ret = i2c_smbus_read_byte_data(data->client, data->regs->ctrl1); 433 if (ret < 0) { 434 dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); 435 return ret; 436 } 437 438 if (mode == STANDBY) 439 ret &= ~KXCJK1013_REG_CTRL1_BIT_PC1; 440 else 441 ret |= KXCJK1013_REG_CTRL1_BIT_PC1; 442 443 ret = i2c_smbus_write_byte_data(data->client, data->regs->ctrl1, ret); 444 if (ret < 0) { 445 dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); 446 return ret; 447 } 448 449 return 0; 450 } 451 452 static int kxcjk1013_get_mode(struct kxcjk1013_data *data, 453 enum kxcjk1013_mode *mode) 454 { 455 int ret; 456 457 ret = i2c_smbus_read_byte_data(data->client, data->regs->ctrl1); 458 if (ret < 0) { 459 dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); 460 return ret; 461 } 462 463 if (ret & KXCJK1013_REG_CTRL1_BIT_PC1) 464 *mode = OPERATION; 465 else 466 *mode = STANDBY; 467 468 return 0; 469 } 470 471 static int kxcjk1013_set_range(struct kxcjk1013_data *data, int range_index) 472 { 473 int ret; 474 475 ret = i2c_smbus_read_byte_data(data->client, data->regs->ctrl1); 476 if (ret < 0) { 477 dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); 478 return ret; 479 } 480 481 ret &= ~(KXCJK1013_REG_CTRL1_BIT_GSEL0 | 482 KXCJK1013_REG_CTRL1_BIT_GSEL1); 483 ret |= (KXCJK1013_scale_table[range_index].gsel_0 << 3); 484 ret |= (KXCJK1013_scale_table[range_index].gsel_1 << 4); 485 486 ret = i2c_smbus_write_byte_data(data->client, data->regs->ctrl1, ret); 487 if (ret < 0) { 488 dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); 489 return ret; 490 } 491 492 data->range = range_index; 493 494 return 0; 495 } 496 497 static int kxcjk1013_chip_init(struct kxcjk1013_data *data) 498 { 499 int ret; 500 501 #ifdef CONFIG_ACPI 502 if (data->acpi_type == ACPI_KIOX010A) { 503 /* Make sure the kbd and touchpad on 2-in-1s using 2 KXCJ91008-s work */ 504 kiox010a_dsm(&data->client->dev, KIOX010A_SET_LAPTOP_MODE); 505 } 506 #endif 507 508 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_WHO_AM_I); 509 if (ret < 0) { 510 dev_err(&data->client->dev, "Error reading who_am_i\n"); 511 return ret; 512 } 513 514 dev_dbg(&data->client->dev, "KXCJK1013 Chip Id %x\n", ret); 515 516 ret = kxcjk1013_set_mode(data, STANDBY); 517 if (ret < 0) 518 return ret; 519 520 ret = i2c_smbus_read_byte_data(data->client, data->regs->ctrl1); 521 if (ret < 0) { 522 dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); 523 return ret; 524 } 525 526 /* Set 12 bit mode */ 527 ret |= KXCJK1013_REG_CTRL1_BIT_RES; 528 529 ret = i2c_smbus_write_byte_data(data->client, data->regs->ctrl1, ret); 530 if (ret < 0) { 531 dev_err(&data->client->dev, "Error reading reg_ctrl\n"); 532 return ret; 533 } 534 535 /* Setting range to 4G */ 536 ret = kxcjk1013_set_range(data, KXCJK1013_RANGE_4G); 537 if (ret < 0) 538 return ret; 539 540 ret = i2c_smbus_read_byte_data(data->client, data->regs->data_ctrl); 541 if (ret < 0) { 542 dev_err(&data->client->dev, "Error reading reg_data_ctrl\n"); 543 return ret; 544 } 545 546 data->odr_bits = ret; 547 548 /* Set up INT polarity */ 549 ret = i2c_smbus_read_byte_data(data->client, data->regs->int_ctrl1); 550 if (ret < 0) { 551 dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n"); 552 return ret; 553 } 554 555 if (data->active_high_intr) 556 ret |= KXCJK1013_REG_INT_CTRL1_BIT_IEA; 557 else 558 ret &= ~KXCJK1013_REG_INT_CTRL1_BIT_IEA; 559 560 ret = i2c_smbus_write_byte_data(data->client, data->regs->int_ctrl1, ret); 561 if (ret < 0) { 562 dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n"); 563 return ret; 564 } 565 566 /* On KX023, route all used interrupts to INT1 for now */ 567 if (data->chipset == KX0231025 && data->client->irq > 0) { 568 ret = i2c_smbus_write_byte_data(data->client, KX023_REG_INC4, 569 KX023_REG_INC4_DRDY1 | 570 KX023_REG_INC4_WUFI1); 571 if (ret < 0) { 572 dev_err(&data->client->dev, "Error writing reg_inc4\n"); 573 return ret; 574 } 575 } 576 577 ret = kxcjk1013_set_mode(data, OPERATION); 578 if (ret < 0) 579 return ret; 580 581 data->wake_thres = KXCJK1013_DEFAULT_WAKE_THRES; 582 583 return 0; 584 } 585 586 #ifdef CONFIG_PM 587 static int kxcjk1013_get_startup_times(struct kxcjk1013_data *data) 588 { 589 int i; 590 int idx = data->chipset; 591 592 for (i = 0; i < ARRAY_SIZE(odr_start_up_times[idx]); ++i) { 593 if (odr_start_up_times[idx][i].odr_bits == data->odr_bits) 594 return odr_start_up_times[idx][i].usec; 595 } 596 597 return KXCJK1013_MAX_STARTUP_TIME_US; 598 } 599 #endif 600 601 static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on) 602 { 603 #ifdef CONFIG_PM 604 int ret; 605 606 if (on) 607 ret = pm_runtime_resume_and_get(&data->client->dev); 608 else { 609 pm_runtime_mark_last_busy(&data->client->dev); 610 ret = pm_runtime_put_autosuspend(&data->client->dev); 611 } 612 if (ret < 0) { 613 dev_err(&data->client->dev, 614 "Failed: %s for %d\n", __func__, on); 615 return ret; 616 } 617 #endif 618 619 return 0; 620 } 621 622 static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data) 623 { 624 int ret; 625 626 ret = i2c_smbus_write_byte_data(data->client, data->regs->wake_timer, 627 data->wake_dur); 628 if (ret < 0) { 629 dev_err(&data->client->dev, 630 "Error writing reg_wake_timer\n"); 631 return ret; 632 } 633 634 ret = i2c_smbus_write_byte_data(data->client, data->regs->wake_thres, 635 data->wake_thres); 636 if (ret < 0) { 637 dev_err(&data->client->dev, "Error writing reg_wake_thres\n"); 638 return ret; 639 } 640 641 return 0; 642 } 643 644 static int kxcjk1013_setup_any_motion_interrupt(struct kxcjk1013_data *data, 645 bool status) 646 { 647 int ret; 648 enum kxcjk1013_mode store_mode; 649 650 ret = kxcjk1013_get_mode(data, &store_mode); 651 if (ret < 0) 652 return ret; 653 654 /* This is requirement by spec to change state to STANDBY */ 655 ret = kxcjk1013_set_mode(data, STANDBY); 656 if (ret < 0) 657 return ret; 658 659 ret = kxcjk1013_chip_update_thresholds(data); 660 if (ret < 0) 661 return ret; 662 663 ret = i2c_smbus_read_byte_data(data->client, data->regs->int_ctrl1); 664 if (ret < 0) { 665 dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n"); 666 return ret; 667 } 668 669 if (status) 670 ret |= KXCJK1013_REG_INT_CTRL1_BIT_IEN; 671 else 672 ret &= ~KXCJK1013_REG_INT_CTRL1_BIT_IEN; 673 674 ret = i2c_smbus_write_byte_data(data->client, data->regs->int_ctrl1, ret); 675 if (ret < 0) { 676 dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n"); 677 return ret; 678 } 679 680 ret = i2c_smbus_read_byte_data(data->client, data->regs->ctrl1); 681 if (ret < 0) { 682 dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); 683 return ret; 684 } 685 686 if (status) 687 ret |= KXCJK1013_REG_CTRL1_BIT_WUFE; 688 else 689 ret &= ~KXCJK1013_REG_CTRL1_BIT_WUFE; 690 691 ret = i2c_smbus_write_byte_data(data->client, data->regs->ctrl1, ret); 692 if (ret < 0) { 693 dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); 694 return ret; 695 } 696 697 if (store_mode == OPERATION) { 698 ret = kxcjk1013_set_mode(data, OPERATION); 699 if (ret < 0) 700 return ret; 701 } 702 703 return 0; 704 } 705 706 static int kxcjk1013_setup_new_data_interrupt(struct kxcjk1013_data *data, 707 bool status) 708 { 709 int ret; 710 enum kxcjk1013_mode store_mode; 711 712 ret = kxcjk1013_get_mode(data, &store_mode); 713 if (ret < 0) 714 return ret; 715 716 /* This is requirement by spec to change state to STANDBY */ 717 ret = kxcjk1013_set_mode(data, STANDBY); 718 if (ret < 0) 719 return ret; 720 721 ret = i2c_smbus_read_byte_data(data->client, data->regs->int_ctrl1); 722 if (ret < 0) { 723 dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n"); 724 return ret; 725 } 726 727 if (status) 728 ret |= KXCJK1013_REG_INT_CTRL1_BIT_IEN; 729 else 730 ret &= ~KXCJK1013_REG_INT_CTRL1_BIT_IEN; 731 732 ret = i2c_smbus_write_byte_data(data->client, data->regs->int_ctrl1, ret); 733 if (ret < 0) { 734 dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n"); 735 return ret; 736 } 737 738 ret = i2c_smbus_read_byte_data(data->client, data->regs->ctrl1); 739 if (ret < 0) { 740 dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); 741 return ret; 742 } 743 744 if (status) 745 ret |= KXCJK1013_REG_CTRL1_BIT_DRDY; 746 else 747 ret &= ~KXCJK1013_REG_CTRL1_BIT_DRDY; 748 749 ret = i2c_smbus_write_byte_data(data->client, data->regs->ctrl1, ret); 750 if (ret < 0) { 751 dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); 752 return ret; 753 } 754 755 if (store_mode == OPERATION) { 756 ret = kxcjk1013_set_mode(data, OPERATION); 757 if (ret < 0) 758 return ret; 759 } 760 761 return 0; 762 } 763 764 static const struct kx_odr_map *kxcjk1013_find_odr_value( 765 const struct kx_odr_map *map, size_t map_size, int val, int val2) 766 { 767 int i; 768 769 for (i = 0; i < map_size; ++i) { 770 if (map[i].val == val && map[i].val2 == val2) 771 return &map[i]; 772 } 773 774 return ERR_PTR(-EINVAL); 775 } 776 777 static int kxcjk1013_convert_odr_value(const struct kx_odr_map *map, 778 size_t map_size, int odr_bits, 779 int *val, int *val2) 780 { 781 int i; 782 783 for (i = 0; i < map_size; ++i) { 784 if (map[i].odr_bits == odr_bits) { 785 *val = map[i].val; 786 *val2 = map[i].val2; 787 return IIO_VAL_INT_PLUS_MICRO; 788 } 789 } 790 791 return -EINVAL; 792 } 793 794 static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2) 795 { 796 int ret; 797 enum kxcjk1013_mode store_mode; 798 const struct kx_odr_map *odr_setting; 799 800 ret = kxcjk1013_get_mode(data, &store_mode); 801 if (ret < 0) 802 return ret; 803 804 if (data->chipset == KXTF9) 805 odr_setting = kxcjk1013_find_odr_value(kxtf9_samp_freq_table, 806 ARRAY_SIZE(kxtf9_samp_freq_table), 807 val, val2); 808 else 809 odr_setting = kxcjk1013_find_odr_value(samp_freq_table, 810 ARRAY_SIZE(samp_freq_table), 811 val, val2); 812 813 if (IS_ERR(odr_setting)) 814 return PTR_ERR(odr_setting); 815 816 /* To change ODR, the chip must be set to STANDBY as per spec */ 817 ret = kxcjk1013_set_mode(data, STANDBY); 818 if (ret < 0) 819 return ret; 820 821 ret = i2c_smbus_write_byte_data(data->client, data->regs->data_ctrl, 822 odr_setting->odr_bits); 823 if (ret < 0) { 824 dev_err(&data->client->dev, "Error writing data_ctrl\n"); 825 return ret; 826 } 827 828 data->odr_bits = odr_setting->odr_bits; 829 830 ret = i2c_smbus_write_byte_data(data->client, data->regs->wuf_ctrl, 831 odr_setting->wuf_bits); 832 if (ret < 0) { 833 dev_err(&data->client->dev, "Error writing reg_ctrl2\n"); 834 return ret; 835 } 836 837 if (store_mode == OPERATION) { 838 ret = kxcjk1013_set_mode(data, OPERATION); 839 if (ret < 0) 840 return ret; 841 } 842 843 return 0; 844 } 845 846 static int kxcjk1013_get_odr(struct kxcjk1013_data *data, int *val, int *val2) 847 { 848 if (data->chipset == KXTF9) 849 return kxcjk1013_convert_odr_value(kxtf9_samp_freq_table, 850 ARRAY_SIZE(kxtf9_samp_freq_table), 851 data->odr_bits, val, val2); 852 else 853 return kxcjk1013_convert_odr_value(samp_freq_table, 854 ARRAY_SIZE(samp_freq_table), 855 data->odr_bits, val, val2); 856 } 857 858 static int kxcjk1013_get_acc_reg(struct kxcjk1013_data *data, int axis) 859 { 860 u8 reg = KXCJK1013_REG_XOUT_L + axis * 2; 861 int ret; 862 863 ret = i2c_smbus_read_word_data(data->client, reg); 864 if (ret < 0) { 865 dev_err(&data->client->dev, 866 "failed to read accel_%c registers\n", 'x' + axis); 867 return ret; 868 } 869 870 return ret; 871 } 872 873 static int kxcjk1013_set_scale(struct kxcjk1013_data *data, int val) 874 { 875 int ret, i; 876 enum kxcjk1013_mode store_mode; 877 878 for (i = 0; i < ARRAY_SIZE(KXCJK1013_scale_table); ++i) { 879 if (KXCJK1013_scale_table[i].scale == val) { 880 ret = kxcjk1013_get_mode(data, &store_mode); 881 if (ret < 0) 882 return ret; 883 884 ret = kxcjk1013_set_mode(data, STANDBY); 885 if (ret < 0) 886 return ret; 887 888 ret = kxcjk1013_set_range(data, i); 889 if (ret < 0) 890 return ret; 891 892 if (store_mode == OPERATION) { 893 ret = kxcjk1013_set_mode(data, OPERATION); 894 if (ret) 895 return ret; 896 } 897 898 return 0; 899 } 900 } 901 902 return -EINVAL; 903 } 904 905 static int kxcjk1013_read_raw(struct iio_dev *indio_dev, 906 struct iio_chan_spec const *chan, int *val, 907 int *val2, long mask) 908 { 909 struct kxcjk1013_data *data = iio_priv(indio_dev); 910 int ret; 911 912 switch (mask) { 913 case IIO_CHAN_INFO_RAW: 914 mutex_lock(&data->mutex); 915 if (iio_buffer_enabled(indio_dev)) 916 ret = -EBUSY; 917 else { 918 ret = kxcjk1013_set_power_state(data, true); 919 if (ret < 0) { 920 mutex_unlock(&data->mutex); 921 return ret; 922 } 923 ret = kxcjk1013_get_acc_reg(data, chan->scan_index); 924 if (ret < 0) { 925 kxcjk1013_set_power_state(data, false); 926 mutex_unlock(&data->mutex); 927 return ret; 928 } 929 *val = sign_extend32(ret >> chan->scan_type.shift, 930 chan->scan_type.realbits - 1); 931 ret = kxcjk1013_set_power_state(data, false); 932 } 933 mutex_unlock(&data->mutex); 934 935 if (ret < 0) 936 return ret; 937 938 return IIO_VAL_INT; 939 940 case IIO_CHAN_INFO_SCALE: 941 *val = 0; 942 *val2 = KXCJK1013_scale_table[data->range].scale; 943 return IIO_VAL_INT_PLUS_MICRO; 944 945 case IIO_CHAN_INFO_SAMP_FREQ: 946 mutex_lock(&data->mutex); 947 ret = kxcjk1013_get_odr(data, val, val2); 948 mutex_unlock(&data->mutex); 949 return ret; 950 951 default: 952 return -EINVAL; 953 } 954 } 955 956 static int kxcjk1013_write_raw(struct iio_dev *indio_dev, 957 struct iio_chan_spec const *chan, int val, 958 int val2, long mask) 959 { 960 struct kxcjk1013_data *data = iio_priv(indio_dev); 961 int ret; 962 963 switch (mask) { 964 case IIO_CHAN_INFO_SAMP_FREQ: 965 mutex_lock(&data->mutex); 966 ret = kxcjk1013_set_odr(data, val, val2); 967 mutex_unlock(&data->mutex); 968 break; 969 case IIO_CHAN_INFO_SCALE: 970 if (val) 971 return -EINVAL; 972 973 mutex_lock(&data->mutex); 974 ret = kxcjk1013_set_scale(data, val2); 975 mutex_unlock(&data->mutex); 976 break; 977 default: 978 ret = -EINVAL; 979 } 980 981 return ret; 982 } 983 984 static int kxcjk1013_read_event(struct iio_dev *indio_dev, 985 const struct iio_chan_spec *chan, 986 enum iio_event_type type, 987 enum iio_event_direction dir, 988 enum iio_event_info info, 989 int *val, int *val2) 990 { 991 struct kxcjk1013_data *data = iio_priv(indio_dev); 992 993 *val2 = 0; 994 switch (info) { 995 case IIO_EV_INFO_VALUE: 996 *val = data->wake_thres; 997 break; 998 case IIO_EV_INFO_PERIOD: 999 *val = data->wake_dur; 1000 break; 1001 default: 1002 return -EINVAL; 1003 } 1004 1005 return IIO_VAL_INT; 1006 } 1007 1008 static int kxcjk1013_write_event(struct iio_dev *indio_dev, 1009 const struct iio_chan_spec *chan, 1010 enum iio_event_type type, 1011 enum iio_event_direction dir, 1012 enum iio_event_info info, 1013 int val, int val2) 1014 { 1015 struct kxcjk1013_data *data = iio_priv(indio_dev); 1016 1017 if (data->ev_enable_state) 1018 return -EBUSY; 1019 1020 switch (info) { 1021 case IIO_EV_INFO_VALUE: 1022 data->wake_thres = val; 1023 break; 1024 case IIO_EV_INFO_PERIOD: 1025 data->wake_dur = val; 1026 break; 1027 default: 1028 return -EINVAL; 1029 } 1030 1031 return 0; 1032 } 1033 1034 static int kxcjk1013_read_event_config(struct iio_dev *indio_dev, 1035 const struct iio_chan_spec *chan, 1036 enum iio_event_type type, 1037 enum iio_event_direction dir) 1038 { 1039 struct kxcjk1013_data *data = iio_priv(indio_dev); 1040 1041 return data->ev_enable_state; 1042 } 1043 1044 static int kxcjk1013_write_event_config(struct iio_dev *indio_dev, 1045 const struct iio_chan_spec *chan, 1046 enum iio_event_type type, 1047 enum iio_event_direction dir, 1048 int state) 1049 { 1050 struct kxcjk1013_data *data = iio_priv(indio_dev); 1051 int ret; 1052 1053 if (state && data->ev_enable_state) 1054 return 0; 1055 1056 mutex_lock(&data->mutex); 1057 1058 if (!state && data->motion_trigger_on) { 1059 data->ev_enable_state = 0; 1060 mutex_unlock(&data->mutex); 1061 return 0; 1062 } 1063 1064 /* 1065 * We will expect the enable and disable to do operation in 1066 * reverse order. This will happen here anyway as our 1067 * resume operation uses sync mode runtime pm calls, the 1068 * suspend operation will be delayed by autosuspend delay 1069 * So the disable operation will still happen in reverse of 1070 * enable operation. When runtime pm is disabled the mode 1071 * is always on so sequence doesn't matter 1072 */ 1073 ret = kxcjk1013_set_power_state(data, state); 1074 if (ret < 0) { 1075 mutex_unlock(&data->mutex); 1076 return ret; 1077 } 1078 1079 ret = kxcjk1013_setup_any_motion_interrupt(data, state); 1080 if (ret < 0) { 1081 kxcjk1013_set_power_state(data, false); 1082 data->ev_enable_state = 0; 1083 mutex_unlock(&data->mutex); 1084 return ret; 1085 } 1086 1087 data->ev_enable_state = state; 1088 mutex_unlock(&data->mutex); 1089 1090 return 0; 1091 } 1092 1093 static int kxcjk1013_buffer_preenable(struct iio_dev *indio_dev) 1094 { 1095 struct kxcjk1013_data *data = iio_priv(indio_dev); 1096 1097 return kxcjk1013_set_power_state(data, true); 1098 } 1099 1100 static int kxcjk1013_buffer_postdisable(struct iio_dev *indio_dev) 1101 { 1102 struct kxcjk1013_data *data = iio_priv(indio_dev); 1103 1104 return kxcjk1013_set_power_state(data, false); 1105 } 1106 1107 static ssize_t kxcjk1013_get_samp_freq_avail(struct device *dev, 1108 struct device_attribute *attr, 1109 char *buf) 1110 { 1111 struct iio_dev *indio_dev = dev_to_iio_dev(dev); 1112 struct kxcjk1013_data *data = iio_priv(indio_dev); 1113 const char *str; 1114 1115 if (data->chipset == KXTF9) 1116 str = kxtf9_samp_freq_avail; 1117 else 1118 str = kxcjk1013_samp_freq_avail; 1119 1120 return sprintf(buf, "%s\n", str); 1121 } 1122 1123 static IIO_DEVICE_ATTR(in_accel_sampling_frequency_available, S_IRUGO, 1124 kxcjk1013_get_samp_freq_avail, NULL, 0); 1125 1126 static IIO_CONST_ATTR(in_accel_scale_available, "0.009582 0.019163 0.038326"); 1127 1128 static struct attribute *kxcjk1013_attributes[] = { 1129 &iio_dev_attr_in_accel_sampling_frequency_available.dev_attr.attr, 1130 &iio_const_attr_in_accel_scale_available.dev_attr.attr, 1131 NULL, 1132 }; 1133 1134 static const struct attribute_group kxcjk1013_attrs_group = { 1135 .attrs = kxcjk1013_attributes, 1136 }; 1137 1138 static const struct iio_event_spec kxcjk1013_event = { 1139 .type = IIO_EV_TYPE_THRESH, 1140 .dir = IIO_EV_DIR_EITHER, 1141 .mask_separate = BIT(IIO_EV_INFO_VALUE) | 1142 BIT(IIO_EV_INFO_ENABLE) | 1143 BIT(IIO_EV_INFO_PERIOD) 1144 }; 1145 1146 static const struct iio_mount_matrix * 1147 kxcjk1013_get_mount_matrix(const struct iio_dev *indio_dev, 1148 const struct iio_chan_spec *chan) 1149 { 1150 struct kxcjk1013_data *data = iio_priv(indio_dev); 1151 1152 return &data->orientation; 1153 } 1154 1155 static const struct iio_chan_spec_ext_info kxcjk1013_ext_info[] = { 1156 IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, kxcjk1013_get_mount_matrix), 1157 { } 1158 }; 1159 1160 #define KXCJK1013_CHANNEL(_axis) { \ 1161 .type = IIO_ACCEL, \ 1162 .modified = 1, \ 1163 .channel2 = IIO_MOD_##_axis, \ 1164 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 1165 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ 1166 BIT(IIO_CHAN_INFO_SAMP_FREQ), \ 1167 .scan_index = AXIS_##_axis, \ 1168 .scan_type = { \ 1169 .sign = 's', \ 1170 .realbits = 12, \ 1171 .storagebits = 16, \ 1172 .shift = 4, \ 1173 .endianness = IIO_LE, \ 1174 }, \ 1175 .event_spec = &kxcjk1013_event, \ 1176 .ext_info = kxcjk1013_ext_info, \ 1177 .num_event_specs = 1 \ 1178 } 1179 1180 static const struct iio_chan_spec kxcjk1013_channels[] = { 1181 KXCJK1013_CHANNEL(X), 1182 KXCJK1013_CHANNEL(Y), 1183 KXCJK1013_CHANNEL(Z), 1184 IIO_CHAN_SOFT_TIMESTAMP(3), 1185 }; 1186 1187 static const struct iio_buffer_setup_ops kxcjk1013_buffer_setup_ops = { 1188 .preenable = kxcjk1013_buffer_preenable, 1189 .postdisable = kxcjk1013_buffer_postdisable, 1190 }; 1191 1192 static const struct iio_info kxcjk1013_info = { 1193 .attrs = &kxcjk1013_attrs_group, 1194 .read_raw = kxcjk1013_read_raw, 1195 .write_raw = kxcjk1013_write_raw, 1196 .read_event_value = kxcjk1013_read_event, 1197 .write_event_value = kxcjk1013_write_event, 1198 .write_event_config = kxcjk1013_write_event_config, 1199 .read_event_config = kxcjk1013_read_event_config, 1200 }; 1201 1202 static const unsigned long kxcjk1013_scan_masks[] = {0x7, 0}; 1203 1204 static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p) 1205 { 1206 struct iio_poll_func *pf = p; 1207 struct iio_dev *indio_dev = pf->indio_dev; 1208 struct kxcjk1013_data *data = iio_priv(indio_dev); 1209 int ret; 1210 1211 mutex_lock(&data->mutex); 1212 ret = i2c_smbus_read_i2c_block_data_or_emulated(data->client, 1213 KXCJK1013_REG_XOUT_L, 1214 AXIS_MAX * 2, 1215 (u8 *)data->scan.chans); 1216 mutex_unlock(&data->mutex); 1217 if (ret < 0) 1218 goto err; 1219 1220 iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, 1221 data->timestamp); 1222 err: 1223 iio_trigger_notify_done(indio_dev->trig); 1224 1225 return IRQ_HANDLED; 1226 } 1227 1228 static void kxcjk1013_trig_reen(struct iio_trigger *trig) 1229 { 1230 struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); 1231 struct kxcjk1013_data *data = iio_priv(indio_dev); 1232 int ret; 1233 1234 ret = i2c_smbus_read_byte_data(data->client, data->regs->int_rel); 1235 if (ret < 0) 1236 dev_err(&data->client->dev, "Error reading reg_int_rel\n"); 1237 } 1238 1239 static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig, 1240 bool state) 1241 { 1242 struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); 1243 struct kxcjk1013_data *data = iio_priv(indio_dev); 1244 int ret; 1245 1246 mutex_lock(&data->mutex); 1247 1248 if (!state && data->ev_enable_state && data->motion_trigger_on) { 1249 data->motion_trigger_on = false; 1250 mutex_unlock(&data->mutex); 1251 return 0; 1252 } 1253 1254 ret = kxcjk1013_set_power_state(data, state); 1255 if (ret < 0) { 1256 mutex_unlock(&data->mutex); 1257 return ret; 1258 } 1259 if (data->motion_trig == trig) 1260 ret = kxcjk1013_setup_any_motion_interrupt(data, state); 1261 else 1262 ret = kxcjk1013_setup_new_data_interrupt(data, state); 1263 if (ret < 0) { 1264 kxcjk1013_set_power_state(data, false); 1265 mutex_unlock(&data->mutex); 1266 return ret; 1267 } 1268 if (data->motion_trig == trig) 1269 data->motion_trigger_on = state; 1270 else 1271 data->dready_trigger_on = state; 1272 1273 mutex_unlock(&data->mutex); 1274 1275 return 0; 1276 } 1277 1278 static const struct iio_trigger_ops kxcjk1013_trigger_ops = { 1279 .set_trigger_state = kxcjk1013_data_rdy_trigger_set_state, 1280 .reenable = kxcjk1013_trig_reen, 1281 }; 1282 1283 static void kxcjk1013_report_motion_event(struct iio_dev *indio_dev) 1284 { 1285 struct kxcjk1013_data *data = iio_priv(indio_dev); 1286 1287 int ret = i2c_smbus_read_byte_data(data->client, data->regs->int_src2); 1288 if (ret < 0) { 1289 dev_err(&data->client->dev, "Error reading reg_int_src2\n"); 1290 return; 1291 } 1292 1293 if (ret & KXCJK1013_REG_INT_SRC2_BIT_XN) 1294 iio_push_event(indio_dev, 1295 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1296 0, 1297 IIO_MOD_X, 1298 IIO_EV_TYPE_THRESH, 1299 IIO_EV_DIR_FALLING), 1300 data->timestamp); 1301 1302 if (ret & KXCJK1013_REG_INT_SRC2_BIT_XP) 1303 iio_push_event(indio_dev, 1304 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1305 0, 1306 IIO_MOD_X, 1307 IIO_EV_TYPE_THRESH, 1308 IIO_EV_DIR_RISING), 1309 data->timestamp); 1310 1311 if (ret & KXCJK1013_REG_INT_SRC2_BIT_YN) 1312 iio_push_event(indio_dev, 1313 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1314 0, 1315 IIO_MOD_Y, 1316 IIO_EV_TYPE_THRESH, 1317 IIO_EV_DIR_FALLING), 1318 data->timestamp); 1319 1320 if (ret & KXCJK1013_REG_INT_SRC2_BIT_YP) 1321 iio_push_event(indio_dev, 1322 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1323 0, 1324 IIO_MOD_Y, 1325 IIO_EV_TYPE_THRESH, 1326 IIO_EV_DIR_RISING), 1327 data->timestamp); 1328 1329 if (ret & KXCJK1013_REG_INT_SRC2_BIT_ZN) 1330 iio_push_event(indio_dev, 1331 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1332 0, 1333 IIO_MOD_Z, 1334 IIO_EV_TYPE_THRESH, 1335 IIO_EV_DIR_FALLING), 1336 data->timestamp); 1337 1338 if (ret & KXCJK1013_REG_INT_SRC2_BIT_ZP) 1339 iio_push_event(indio_dev, 1340 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1341 0, 1342 IIO_MOD_Z, 1343 IIO_EV_TYPE_THRESH, 1344 IIO_EV_DIR_RISING), 1345 data->timestamp); 1346 } 1347 1348 static irqreturn_t kxcjk1013_event_handler(int irq, void *private) 1349 { 1350 struct iio_dev *indio_dev = private; 1351 struct kxcjk1013_data *data = iio_priv(indio_dev); 1352 int ret; 1353 1354 ret = i2c_smbus_read_byte_data(data->client, data->regs->int_src1); 1355 if (ret < 0) { 1356 dev_err(&data->client->dev, "Error reading reg_int_src1\n"); 1357 goto ack_intr; 1358 } 1359 1360 if (ret & KXCJK1013_REG_INT_SRC1_BIT_WUFS) { 1361 if (data->chipset == KXTF9) 1362 iio_push_event(indio_dev, 1363 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1364 0, 1365 IIO_MOD_X_AND_Y_AND_Z, 1366 IIO_EV_TYPE_THRESH, 1367 IIO_EV_DIR_RISING), 1368 data->timestamp); 1369 else 1370 kxcjk1013_report_motion_event(indio_dev); 1371 } 1372 1373 ack_intr: 1374 if (data->dready_trigger_on) 1375 return IRQ_HANDLED; 1376 1377 ret = i2c_smbus_read_byte_data(data->client, data->regs->int_rel); 1378 if (ret < 0) 1379 dev_err(&data->client->dev, "Error reading reg_int_rel\n"); 1380 1381 return IRQ_HANDLED; 1382 } 1383 1384 static irqreturn_t kxcjk1013_data_rdy_trig_poll(int irq, void *private) 1385 { 1386 struct iio_dev *indio_dev = private; 1387 struct kxcjk1013_data *data = iio_priv(indio_dev); 1388 1389 data->timestamp = iio_get_time_ns(indio_dev); 1390 1391 if (data->dready_trigger_on) 1392 iio_trigger_poll(data->dready_trig); 1393 else if (data->motion_trigger_on) 1394 iio_trigger_poll(data->motion_trig); 1395 1396 if (data->ev_enable_state) 1397 return IRQ_WAKE_THREAD; 1398 else 1399 return IRQ_HANDLED; 1400 } 1401 1402 static const char *kxcjk1013_match_acpi_device(struct device *dev, 1403 enum kx_chipset *chipset, 1404 enum kx_acpi_type *acpi_type, 1405 const char **label) 1406 { 1407 const struct acpi_device_id *id; 1408 1409 id = acpi_match_device(dev->driver->acpi_match_table, dev); 1410 if (!id) 1411 return NULL; 1412 1413 if (strcmp(id->id, "SMO8500") == 0) { 1414 *acpi_type = ACPI_SMO8500; 1415 } else if (strcmp(id->id, "KIOX010A") == 0) { 1416 *acpi_type = ACPI_KIOX010A; 1417 *label = "accel-display"; 1418 } else if (strcmp(id->id, "KIOX020A") == 0) { 1419 *label = "accel-base"; 1420 } 1421 1422 *chipset = (enum kx_chipset)id->driver_data; 1423 1424 return dev_name(dev); 1425 } 1426 1427 static int kxcjk1013_probe(struct i2c_client *client) 1428 { 1429 const struct i2c_device_id *id = i2c_client_get_device_id(client); 1430 static const char * const regulator_names[] = { "vdd", "vddio" }; 1431 struct kxcjk1013_data *data; 1432 struct iio_dev *indio_dev; 1433 struct kxcjk_1013_platform_data *pdata; 1434 const char *name; 1435 int ret; 1436 1437 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); 1438 if (!indio_dev) 1439 return -ENOMEM; 1440 1441 data = iio_priv(indio_dev); 1442 i2c_set_clientdata(client, indio_dev); 1443 data->client = client; 1444 1445 pdata = dev_get_platdata(&client->dev); 1446 if (pdata) { 1447 data->active_high_intr = pdata->active_high_intr; 1448 data->orientation = pdata->orientation; 1449 } else { 1450 data->active_high_intr = true; /* default polarity */ 1451 1452 ret = iio_read_mount_matrix(&client->dev, &data->orientation); 1453 if (ret) 1454 return ret; 1455 } 1456 1457 ret = devm_regulator_bulk_get_enable(&client->dev, 1458 ARRAY_SIZE(regulator_names), 1459 regulator_names); 1460 if (ret) 1461 return dev_err_probe(&client->dev, ret, "Failed to get regulators\n"); 1462 1463 /* 1464 * A typical delay of 10ms is required for powering up 1465 * according to the data sheets of supported chips. 1466 * Hence double that to play safe. 1467 */ 1468 msleep(20); 1469 1470 if (id) { 1471 data->chipset = (enum kx_chipset)(id->driver_data); 1472 name = id->name; 1473 } else if (ACPI_HANDLE(&client->dev)) { 1474 name = kxcjk1013_match_acpi_device(&client->dev, 1475 &data->chipset, 1476 &data->acpi_type, 1477 &indio_dev->label); 1478 } else 1479 return -ENODEV; 1480 1481 switch (data->chipset) { 1482 case KXCJK1013: 1483 case KXCJ91008: 1484 case KXTJ21009: 1485 data->regs = &kxcjk1013_regs; 1486 break; 1487 case KXTF9: 1488 data->regs = &kxtf9_regs; 1489 break; 1490 case KX0231025: 1491 data->regs = &kx0231025_regs; 1492 break; 1493 default: 1494 return -EINVAL; 1495 } 1496 1497 ret = kxcjk1013_chip_init(data); 1498 if (ret < 0) 1499 return ret; 1500 1501 mutex_init(&data->mutex); 1502 1503 indio_dev->channels = kxcjk1013_channels; 1504 indio_dev->num_channels = ARRAY_SIZE(kxcjk1013_channels); 1505 indio_dev->available_scan_masks = kxcjk1013_scan_masks; 1506 indio_dev->name = name; 1507 indio_dev->modes = INDIO_DIRECT_MODE; 1508 indio_dev->info = &kxcjk1013_info; 1509 1510 if (client->irq > 0 && data->acpi_type != ACPI_SMO8500) { 1511 ret = devm_request_threaded_irq(&client->dev, client->irq, 1512 kxcjk1013_data_rdy_trig_poll, 1513 kxcjk1013_event_handler, 1514 IRQF_TRIGGER_RISING, 1515 KXCJK1013_IRQ_NAME, 1516 indio_dev); 1517 if (ret) 1518 goto err_poweroff; 1519 1520 data->dready_trig = devm_iio_trigger_alloc(&client->dev, 1521 "%s-dev%d", 1522 indio_dev->name, 1523 iio_device_id(indio_dev)); 1524 if (!data->dready_trig) { 1525 ret = -ENOMEM; 1526 goto err_poweroff; 1527 } 1528 1529 data->motion_trig = devm_iio_trigger_alloc(&client->dev, 1530 "%s-any-motion-dev%d", 1531 indio_dev->name, 1532 iio_device_id(indio_dev)); 1533 if (!data->motion_trig) { 1534 ret = -ENOMEM; 1535 goto err_poweroff; 1536 } 1537 1538 data->dready_trig->ops = &kxcjk1013_trigger_ops; 1539 iio_trigger_set_drvdata(data->dready_trig, indio_dev); 1540 ret = iio_trigger_register(data->dready_trig); 1541 if (ret) 1542 goto err_poweroff; 1543 1544 indio_dev->trig = iio_trigger_get(data->dready_trig); 1545 1546 data->motion_trig->ops = &kxcjk1013_trigger_ops; 1547 iio_trigger_set_drvdata(data->motion_trig, indio_dev); 1548 ret = iio_trigger_register(data->motion_trig); 1549 if (ret) { 1550 data->motion_trig = NULL; 1551 goto err_trigger_unregister; 1552 } 1553 } 1554 1555 ret = iio_triggered_buffer_setup(indio_dev, 1556 &iio_pollfunc_store_time, 1557 kxcjk1013_trigger_handler, 1558 &kxcjk1013_buffer_setup_ops); 1559 if (ret < 0) { 1560 dev_err(&client->dev, "iio triggered buffer setup failed\n"); 1561 goto err_trigger_unregister; 1562 } 1563 1564 ret = pm_runtime_set_active(&client->dev); 1565 if (ret) 1566 goto err_buffer_cleanup; 1567 1568 pm_runtime_enable(&client->dev); 1569 pm_runtime_set_autosuspend_delay(&client->dev, 1570 KXCJK1013_SLEEP_DELAY_MS); 1571 pm_runtime_use_autosuspend(&client->dev); 1572 1573 ret = iio_device_register(indio_dev); 1574 if (ret < 0) { 1575 dev_err(&client->dev, "unable to register iio device\n"); 1576 goto err_pm_cleanup; 1577 } 1578 1579 return 0; 1580 1581 err_pm_cleanup: 1582 pm_runtime_dont_use_autosuspend(&client->dev); 1583 pm_runtime_disable(&client->dev); 1584 err_buffer_cleanup: 1585 iio_triggered_buffer_cleanup(indio_dev); 1586 err_trigger_unregister: 1587 if (data->dready_trig) 1588 iio_trigger_unregister(data->dready_trig); 1589 if (data->motion_trig) 1590 iio_trigger_unregister(data->motion_trig); 1591 err_poweroff: 1592 kxcjk1013_set_mode(data, STANDBY); 1593 1594 return ret; 1595 } 1596 1597 static void kxcjk1013_remove(struct i2c_client *client) 1598 { 1599 struct iio_dev *indio_dev = i2c_get_clientdata(client); 1600 struct kxcjk1013_data *data = iio_priv(indio_dev); 1601 1602 iio_device_unregister(indio_dev); 1603 1604 pm_runtime_disable(&client->dev); 1605 pm_runtime_set_suspended(&client->dev); 1606 1607 iio_triggered_buffer_cleanup(indio_dev); 1608 if (data->dready_trig) { 1609 iio_trigger_unregister(data->dready_trig); 1610 iio_trigger_unregister(data->motion_trig); 1611 } 1612 1613 mutex_lock(&data->mutex); 1614 kxcjk1013_set_mode(data, STANDBY); 1615 mutex_unlock(&data->mutex); 1616 } 1617 1618 #ifdef CONFIG_PM_SLEEP 1619 static int kxcjk1013_suspend(struct device *dev) 1620 { 1621 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); 1622 struct kxcjk1013_data *data = iio_priv(indio_dev); 1623 int ret; 1624 1625 mutex_lock(&data->mutex); 1626 ret = kxcjk1013_set_mode(data, STANDBY); 1627 mutex_unlock(&data->mutex); 1628 1629 return ret; 1630 } 1631 1632 static int kxcjk1013_resume(struct device *dev) 1633 { 1634 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); 1635 struct kxcjk1013_data *data = iio_priv(indio_dev); 1636 int ret = 0; 1637 1638 mutex_lock(&data->mutex); 1639 ret = kxcjk1013_set_mode(data, OPERATION); 1640 if (ret == 0) 1641 ret = kxcjk1013_set_range(data, data->range); 1642 mutex_unlock(&data->mutex); 1643 1644 return ret; 1645 } 1646 #endif 1647 1648 #ifdef CONFIG_PM 1649 static int kxcjk1013_runtime_suspend(struct device *dev) 1650 { 1651 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); 1652 struct kxcjk1013_data *data = iio_priv(indio_dev); 1653 int ret; 1654 1655 ret = kxcjk1013_set_mode(data, STANDBY); 1656 if (ret < 0) { 1657 dev_err(&data->client->dev, "powering off device failed\n"); 1658 return -EAGAIN; 1659 } 1660 return 0; 1661 } 1662 1663 static int kxcjk1013_runtime_resume(struct device *dev) 1664 { 1665 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); 1666 struct kxcjk1013_data *data = iio_priv(indio_dev); 1667 int ret; 1668 int sleep_val; 1669 1670 ret = kxcjk1013_set_mode(data, OPERATION); 1671 if (ret < 0) 1672 return ret; 1673 1674 sleep_val = kxcjk1013_get_startup_times(data); 1675 if (sleep_val < 20000) 1676 usleep_range(sleep_val, 20000); 1677 else 1678 msleep_interruptible(sleep_val/1000); 1679 1680 return 0; 1681 } 1682 #endif 1683 1684 static const struct dev_pm_ops kxcjk1013_pm_ops = { 1685 SET_SYSTEM_SLEEP_PM_OPS(kxcjk1013_suspend, kxcjk1013_resume) 1686 SET_RUNTIME_PM_OPS(kxcjk1013_runtime_suspend, 1687 kxcjk1013_runtime_resume, NULL) 1688 }; 1689 1690 static const struct acpi_device_id kx_acpi_match[] = { 1691 {"KXCJ1013", KXCJK1013}, 1692 {"KXCJ1008", KXCJ91008}, 1693 {"KXCJ9000", KXCJ91008}, 1694 {"KIOX0008", KXCJ91008}, 1695 {"KIOX0009", KXTJ21009}, 1696 {"KIOX000A", KXCJ91008}, 1697 {"KIOX010A", KXCJ91008}, /* KXCJ91008 in the display of a yoga 2-in-1 */ 1698 {"KIOX020A", KXCJ91008}, /* KXCJ91008 in the base of a yoga 2-in-1 */ 1699 {"KXTJ1009", KXTJ21009}, 1700 {"KXJ2109", KXTJ21009}, 1701 {"SMO8500", KXCJ91008}, 1702 { }, 1703 }; 1704 MODULE_DEVICE_TABLE(acpi, kx_acpi_match); 1705 1706 static const struct i2c_device_id kxcjk1013_id[] = { 1707 {"kxcjk1013", KXCJK1013}, 1708 {"kxcj91008", KXCJ91008}, 1709 {"kxtj21009", KXTJ21009}, 1710 {"kxtf9", KXTF9}, 1711 {"kx023-1025", KX0231025}, 1712 {"SMO8500", KXCJ91008}, 1713 {} 1714 }; 1715 1716 MODULE_DEVICE_TABLE(i2c, kxcjk1013_id); 1717 1718 static const struct of_device_id kxcjk1013_of_match[] = { 1719 { .compatible = "kionix,kxcjk1013", }, 1720 { .compatible = "kionix,kxcj91008", }, 1721 { .compatible = "kionix,kxtj21009", }, 1722 { .compatible = "kionix,kxtf9", }, 1723 { .compatible = "kionix,kx023-1025", }, 1724 { } 1725 }; 1726 MODULE_DEVICE_TABLE(of, kxcjk1013_of_match); 1727 1728 static struct i2c_driver kxcjk1013_driver = { 1729 .driver = { 1730 .name = KXCJK1013_DRV_NAME, 1731 .acpi_match_table = ACPI_PTR(kx_acpi_match), 1732 .of_match_table = kxcjk1013_of_match, 1733 .pm = &kxcjk1013_pm_ops, 1734 }, 1735 .probe = kxcjk1013_probe, 1736 .remove = kxcjk1013_remove, 1737 .id_table = kxcjk1013_id, 1738 }; 1739 module_i2c_driver(kxcjk1013_driver); 1740 1741 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); 1742 MODULE_LICENSE("GPL v2"); 1743 MODULE_DESCRIPTION("KXCJK1013 accelerometer driver"); 1744