1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * KXCJK-1013 3-axis accelerometer driver 4 * Copyright (c) 2014, Intel Corporation. 5 */ 6 7 #include <linux/module.h> 8 #include <linux/i2c.h> 9 #include <linux/interrupt.h> 10 #include <linux/delay.h> 11 #include <linux/bitops.h> 12 #include <linux/slab.h> 13 #include <linux/string.h> 14 #include <linux/acpi.h> 15 #include <linux/pm.h> 16 #include <linux/pm_runtime.h> 17 #include <linux/regulator/consumer.h> 18 #include <linux/iio/iio.h> 19 #include <linux/iio/sysfs.h> 20 #include <linux/iio/buffer.h> 21 #include <linux/iio/trigger.h> 22 #include <linux/iio/events.h> 23 #include <linux/iio/trigger_consumer.h> 24 #include <linux/iio/triggered_buffer.h> 25 #include <linux/iio/accel/kxcjk_1013.h> 26 27 #define KXCJK1013_DRV_NAME "kxcjk1013" 28 #define KXCJK1013_IRQ_NAME "kxcjk1013_event" 29 30 #define KXTF9_REG_HP_XOUT_L 0x00 31 #define KXTF9_REG_HP_XOUT_H 0x01 32 #define KXTF9_REG_HP_YOUT_L 0x02 33 #define KXTF9_REG_HP_YOUT_H 0x03 34 #define KXTF9_REG_HP_ZOUT_L 0x04 35 #define KXTF9_REG_HP_ZOUT_H 0x05 36 37 #define KXCJK1013_REG_XOUT_L 0x06 38 /* 39 * From low byte X axis register, all the other addresses of Y and Z can be 40 * obtained by just applying axis offset. The following axis defines are just 41 * provide clarity, but not used. 42 */ 43 #define KXCJK1013_REG_XOUT_H 0x07 44 #define KXCJK1013_REG_YOUT_L 0x08 45 #define KXCJK1013_REG_YOUT_H 0x09 46 #define KXCJK1013_REG_ZOUT_L 0x0A 47 #define KXCJK1013_REG_ZOUT_H 0x0B 48 49 #define KXCJK1013_REG_DCST_RESP 0x0C 50 #define KXCJK1013_REG_WHO_AM_I 0x0F 51 #define KXTF9_REG_TILT_POS_CUR 0x10 52 #define KXTF9_REG_TILT_POS_PREV 0x11 53 #define KXTF9_REG_INT_SRC1 0x15 54 #define KXCJK1013_REG_INT_SRC1 0x16 /* compatible, but called INT_SRC2 in KXTF9 ds */ 55 #define KXCJK1013_REG_INT_SRC2 0x17 56 #define KXCJK1013_REG_STATUS_REG 0x18 57 #define KXCJK1013_REG_INT_REL 0x1A 58 #define KXCJK1013_REG_CTRL1 0x1B 59 #define KXTF9_REG_CTRL2 0x1C 60 #define KXCJK1013_REG_CTRL2 0x1D /* mostly compatible, CTRL_REG3 in KTXF9 ds */ 61 #define KXCJK1013_REG_INT_CTRL1 0x1E 62 #define KXCJK1013_REG_INT_CTRL2 0x1F 63 #define KXTF9_REG_INT_CTRL3 0x20 64 #define KXCJK1013_REG_DATA_CTRL 0x21 65 #define KXTF9_REG_TILT_TIMER 0x28 66 #define KXCJK1013_REG_WAKE_TIMER 0x29 67 #define KXTF9_REG_TDT_TIMER 0x2B 68 #define KXTF9_REG_TDT_THRESH_H 0x2C 69 #define KXTF9_REG_TDT_THRESH_L 0x2D 70 #define KXTF9_REG_TDT_TAP_TIMER 0x2E 71 #define KXTF9_REG_TDT_TOTAL_TIMER 0x2F 72 #define KXTF9_REG_TDT_LATENCY_TIMER 0x30 73 #define KXTF9_REG_TDT_WINDOW_TIMER 0x31 74 #define KXCJK1013_REG_SELF_TEST 0x3A 75 #define KXTF9_REG_WAKE_THRESH 0x5A 76 #define KXTF9_REG_TILT_ANGLE 0x5C 77 #define KXTF9_REG_HYST_SET 0x5F 78 #define KXCJK1013_REG_WAKE_THRES 0x6A 79 80 #define KXCJK1013_REG_CTRL1_BIT_PC1 BIT(7) 81 #define KXCJK1013_REG_CTRL1_BIT_RES BIT(6) 82 #define KXCJK1013_REG_CTRL1_BIT_DRDY BIT(5) 83 #define KXCJK1013_REG_CTRL1_BIT_GSEL1 BIT(4) 84 #define KXCJK1013_REG_CTRL1_BIT_GSEL0 BIT(3) 85 #define KXCJK1013_REG_CTRL1_BIT_WUFE BIT(1) 86 87 #define KXCJK1013_REG_INT_CTRL1_BIT_IEU BIT(2) /* KXTF9 */ 88 #define KXCJK1013_REG_INT_CTRL1_BIT_IEL BIT(3) 89 #define KXCJK1013_REG_INT_CTRL1_BIT_IEA BIT(4) 90 #define KXCJK1013_REG_INT_CTRL1_BIT_IEN BIT(5) 91 92 #define KXTF9_REG_TILT_BIT_LEFT_EDGE BIT(5) 93 #define KXTF9_REG_TILT_BIT_RIGHT_EDGE BIT(4) 94 #define KXTF9_REG_TILT_BIT_LOWER_EDGE BIT(3) 95 #define KXTF9_REG_TILT_BIT_UPPER_EDGE BIT(2) 96 #define KXTF9_REG_TILT_BIT_FACE_DOWN BIT(1) 97 #define KXTF9_REG_TILT_BIT_FACE_UP BIT(0) 98 99 #define KXCJK1013_DATA_MASK_12_BIT 0x0FFF 100 #define KXCJK1013_MAX_STARTUP_TIME_US 100000 101 102 #define KXCJK1013_SLEEP_DELAY_MS 2000 103 104 #define KXCJK1013_REG_INT_SRC1_BIT_TPS BIT(0) /* KXTF9 */ 105 #define KXCJK1013_REG_INT_SRC1_BIT_WUFS BIT(1) 106 #define KXCJK1013_REG_INT_SRC1_MASK_TDTS (BIT(2) | BIT(3)) /* KXTF9 */ 107 #define KXCJK1013_REG_INT_SRC1_TAP_NONE 0 108 #define KXCJK1013_REG_INT_SRC1_TAP_SINGLE BIT(2) 109 #define KXCJK1013_REG_INT_SRC1_TAP_DOUBLE BIT(3) 110 #define KXCJK1013_REG_INT_SRC1_BIT_DRDY BIT(4) 111 112 /* KXCJK: INT_SOURCE2: motion detect, KXTF9: INT_SRC_REG1: tap detect */ 113 #define KXCJK1013_REG_INT_SRC2_BIT_ZP BIT(0) 114 #define KXCJK1013_REG_INT_SRC2_BIT_ZN BIT(1) 115 #define KXCJK1013_REG_INT_SRC2_BIT_YP BIT(2) 116 #define KXCJK1013_REG_INT_SRC2_BIT_YN BIT(3) 117 #define KXCJK1013_REG_INT_SRC2_BIT_XP BIT(4) 118 #define KXCJK1013_REG_INT_SRC2_BIT_XN BIT(5) 119 120 #define KXCJK1013_DEFAULT_WAKE_THRES 1 121 122 enum kx_chipset { 123 KXCJK1013, 124 KXCJ91008, 125 KXTJ21009, 126 KXTF9, 127 KX_MAX_CHIPS /* this must be last */ 128 }; 129 130 enum kx_acpi_type { 131 ACPI_GENERIC, 132 ACPI_SMO8500, 133 ACPI_KIOX010A, 134 }; 135 136 struct kxcjk1013_data { 137 struct regulator_bulk_data regulators[2]; 138 struct i2c_client *client; 139 struct iio_trigger *dready_trig; 140 struct iio_trigger *motion_trig; 141 struct iio_mount_matrix orientation; 142 struct mutex mutex; 143 s16 buffer[8]; 144 u8 odr_bits; 145 u8 range; 146 int wake_thres; 147 int wake_dur; 148 bool active_high_intr; 149 bool dready_trigger_on; 150 int ev_enable_state; 151 bool motion_trigger_on; 152 int64_t timestamp; 153 enum kx_chipset chipset; 154 enum kx_acpi_type acpi_type; 155 }; 156 157 enum kxcjk1013_axis { 158 AXIS_X, 159 AXIS_Y, 160 AXIS_Z, 161 AXIS_MAX, 162 }; 163 164 enum kxcjk1013_mode { 165 STANDBY, 166 OPERATION, 167 }; 168 169 enum kxcjk1013_range { 170 KXCJK1013_RANGE_2G, 171 KXCJK1013_RANGE_4G, 172 KXCJK1013_RANGE_8G, 173 }; 174 175 struct kx_odr_map { 176 int val; 177 int val2; 178 int odr_bits; 179 int wuf_bits; 180 }; 181 182 static const struct kx_odr_map samp_freq_table[] = { 183 { 0, 781000, 0x08, 0x00 }, 184 { 1, 563000, 0x09, 0x01 }, 185 { 3, 125000, 0x0A, 0x02 }, 186 { 6, 250000, 0x0B, 0x03 }, 187 { 12, 500000, 0x00, 0x04 }, 188 { 25, 0, 0x01, 0x05 }, 189 { 50, 0, 0x02, 0x06 }, 190 { 100, 0, 0x03, 0x06 }, 191 { 200, 0, 0x04, 0x06 }, 192 { 400, 0, 0x05, 0x06 }, 193 { 800, 0, 0x06, 0x06 }, 194 { 1600, 0, 0x07, 0x06 }, 195 }; 196 197 static const char *const kxcjk1013_samp_freq_avail = 198 "0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800 1600"; 199 200 static const struct kx_odr_map kxtf9_samp_freq_table[] = { 201 { 25, 0, 0x01, 0x00 }, 202 { 50, 0, 0x02, 0x01 }, 203 { 100, 0, 0x03, 0x01 }, 204 { 200, 0, 0x04, 0x01 }, 205 { 400, 0, 0x05, 0x01 }, 206 { 800, 0, 0x06, 0x01 }, 207 }; 208 209 static const char *const kxtf9_samp_freq_avail = 210 "25 50 100 200 400 800"; 211 212 /* Refer to section 4 of the specification */ 213 static const struct { 214 int odr_bits; 215 int usec; 216 } odr_start_up_times[KX_MAX_CHIPS][12] = { 217 /* KXCJK-1013 */ 218 { 219 {0x08, 100000}, 220 {0x09, 100000}, 221 {0x0A, 100000}, 222 {0x0B, 100000}, 223 {0, 80000}, 224 {0x01, 41000}, 225 {0x02, 21000}, 226 {0x03, 11000}, 227 {0x04, 6400}, 228 {0x05, 3900}, 229 {0x06, 2700}, 230 {0x07, 2100}, 231 }, 232 /* KXCJ9-1008 */ 233 { 234 {0x08, 100000}, 235 {0x09, 100000}, 236 {0x0A, 100000}, 237 {0x0B, 100000}, 238 {0, 80000}, 239 {0x01, 41000}, 240 {0x02, 21000}, 241 {0x03, 11000}, 242 {0x04, 6400}, 243 {0x05, 3900}, 244 {0x06, 2700}, 245 {0x07, 2100}, 246 }, 247 /* KXCTJ2-1009 */ 248 { 249 {0x08, 1240000}, 250 {0x09, 621000}, 251 {0x0A, 309000}, 252 {0x0B, 151000}, 253 {0, 80000}, 254 {0x01, 41000}, 255 {0x02, 21000}, 256 {0x03, 11000}, 257 {0x04, 6000}, 258 {0x05, 4000}, 259 {0x06, 3000}, 260 {0x07, 2000}, 261 }, 262 /* KXTF9 */ 263 { 264 {0x01, 81000}, 265 {0x02, 41000}, 266 {0x03, 21000}, 267 {0x04, 11000}, 268 {0x05, 5100}, 269 {0x06, 2700}, 270 }, 271 }; 272 273 static const struct { 274 u16 scale; 275 u8 gsel_0; 276 u8 gsel_1; 277 } KXCJK1013_scale_table[] = { {9582, 0, 0}, 278 {19163, 1, 0}, 279 {38326, 0, 1} }; 280 281 #ifdef CONFIG_ACPI 282 enum kiox010a_fn_index { 283 KIOX010A_SET_LAPTOP_MODE = 1, 284 KIOX010A_SET_TABLET_MODE = 2, 285 }; 286 287 static int kiox010a_dsm(struct device *dev, int fn_index) 288 { 289 acpi_handle handle = ACPI_HANDLE(dev); 290 guid_t kiox010a_dsm_guid; 291 union acpi_object *obj; 292 293 if (!handle) 294 return -ENODEV; 295 296 guid_parse("1f339696-d475-4e26-8cad-2e9f8e6d7a91", &kiox010a_dsm_guid); 297 298 obj = acpi_evaluate_dsm(handle, &kiox010a_dsm_guid, 1, fn_index, NULL); 299 if (!obj) 300 return -EIO; 301 302 ACPI_FREE(obj); 303 return 0; 304 } 305 #endif 306 307 static int kxcjk1013_set_mode(struct kxcjk1013_data *data, 308 enum kxcjk1013_mode mode) 309 { 310 int ret; 311 312 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1); 313 if (ret < 0) { 314 dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); 315 return ret; 316 } 317 318 if (mode == STANDBY) 319 ret &= ~KXCJK1013_REG_CTRL1_BIT_PC1; 320 else 321 ret |= KXCJK1013_REG_CTRL1_BIT_PC1; 322 323 ret = i2c_smbus_write_byte_data(data->client, 324 KXCJK1013_REG_CTRL1, ret); 325 if (ret < 0) { 326 dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); 327 return ret; 328 } 329 330 return 0; 331 } 332 333 static int kxcjk1013_get_mode(struct kxcjk1013_data *data, 334 enum kxcjk1013_mode *mode) 335 { 336 int ret; 337 338 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1); 339 if (ret < 0) { 340 dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); 341 return ret; 342 } 343 344 if (ret & KXCJK1013_REG_CTRL1_BIT_PC1) 345 *mode = OPERATION; 346 else 347 *mode = STANDBY; 348 349 return 0; 350 } 351 352 static int kxcjk1013_set_range(struct kxcjk1013_data *data, int range_index) 353 { 354 int ret; 355 356 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1); 357 if (ret < 0) { 358 dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); 359 return ret; 360 } 361 362 ret &= ~(KXCJK1013_REG_CTRL1_BIT_GSEL0 | 363 KXCJK1013_REG_CTRL1_BIT_GSEL1); 364 ret |= (KXCJK1013_scale_table[range_index].gsel_0 << 3); 365 ret |= (KXCJK1013_scale_table[range_index].gsel_1 << 4); 366 367 ret = i2c_smbus_write_byte_data(data->client, 368 KXCJK1013_REG_CTRL1, 369 ret); 370 if (ret < 0) { 371 dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); 372 return ret; 373 } 374 375 data->range = range_index; 376 377 return 0; 378 } 379 380 static int kxcjk1013_chip_init(struct kxcjk1013_data *data) 381 { 382 int ret; 383 384 #ifdef CONFIG_ACPI 385 if (data->acpi_type == ACPI_KIOX010A) { 386 /* Make sure the kbd and touchpad on 2-in-1s using 2 KXCJ91008-s work */ 387 kiox010a_dsm(&data->client->dev, KIOX010A_SET_LAPTOP_MODE); 388 } 389 #endif 390 391 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_WHO_AM_I); 392 if (ret < 0) { 393 dev_err(&data->client->dev, "Error reading who_am_i\n"); 394 return ret; 395 } 396 397 dev_dbg(&data->client->dev, "KXCJK1013 Chip Id %x\n", ret); 398 399 ret = kxcjk1013_set_mode(data, STANDBY); 400 if (ret < 0) 401 return ret; 402 403 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1); 404 if (ret < 0) { 405 dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); 406 return ret; 407 } 408 409 /* Set 12 bit mode */ 410 ret |= KXCJK1013_REG_CTRL1_BIT_RES; 411 412 ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL1, 413 ret); 414 if (ret < 0) { 415 dev_err(&data->client->dev, "Error reading reg_ctrl\n"); 416 return ret; 417 } 418 419 /* Setting range to 4G */ 420 ret = kxcjk1013_set_range(data, KXCJK1013_RANGE_4G); 421 if (ret < 0) 422 return ret; 423 424 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_DATA_CTRL); 425 if (ret < 0) { 426 dev_err(&data->client->dev, "Error reading reg_data_ctrl\n"); 427 return ret; 428 } 429 430 data->odr_bits = ret; 431 432 /* Set up INT polarity */ 433 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1); 434 if (ret < 0) { 435 dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n"); 436 return ret; 437 } 438 439 if (data->active_high_intr) 440 ret |= KXCJK1013_REG_INT_CTRL1_BIT_IEA; 441 else 442 ret &= ~KXCJK1013_REG_INT_CTRL1_BIT_IEA; 443 444 ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1, 445 ret); 446 if (ret < 0) { 447 dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n"); 448 return ret; 449 } 450 451 ret = kxcjk1013_set_mode(data, OPERATION); 452 if (ret < 0) 453 return ret; 454 455 data->wake_thres = KXCJK1013_DEFAULT_WAKE_THRES; 456 457 return 0; 458 } 459 460 #ifdef CONFIG_PM 461 static int kxcjk1013_get_startup_times(struct kxcjk1013_data *data) 462 { 463 int i; 464 int idx = data->chipset; 465 466 for (i = 0; i < ARRAY_SIZE(odr_start_up_times[idx]); ++i) { 467 if (odr_start_up_times[idx][i].odr_bits == data->odr_bits) 468 return odr_start_up_times[idx][i].usec; 469 } 470 471 return KXCJK1013_MAX_STARTUP_TIME_US; 472 } 473 #endif 474 475 static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on) 476 { 477 #ifdef CONFIG_PM 478 int ret; 479 480 if (on) 481 ret = pm_runtime_get_sync(&data->client->dev); 482 else { 483 pm_runtime_mark_last_busy(&data->client->dev); 484 ret = pm_runtime_put_autosuspend(&data->client->dev); 485 } 486 if (ret < 0) { 487 dev_err(&data->client->dev, 488 "Failed: %s for %d\n", __func__, on); 489 if (on) 490 pm_runtime_put_noidle(&data->client->dev); 491 return ret; 492 } 493 #endif 494 495 return 0; 496 } 497 498 static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data) 499 { 500 int waketh_reg, ret; 501 502 ret = i2c_smbus_write_byte_data(data->client, 503 KXCJK1013_REG_WAKE_TIMER, 504 data->wake_dur); 505 if (ret < 0) { 506 dev_err(&data->client->dev, 507 "Error writing reg_wake_timer\n"); 508 return ret; 509 } 510 511 waketh_reg = data->chipset == KXTF9 ? 512 KXTF9_REG_WAKE_THRESH : KXCJK1013_REG_WAKE_THRES; 513 ret = i2c_smbus_write_byte_data(data->client, waketh_reg, 514 data->wake_thres); 515 if (ret < 0) { 516 dev_err(&data->client->dev, "Error writing reg_wake_thres\n"); 517 return ret; 518 } 519 520 return 0; 521 } 522 523 static int kxcjk1013_setup_any_motion_interrupt(struct kxcjk1013_data *data, 524 bool status) 525 { 526 int ret; 527 enum kxcjk1013_mode store_mode; 528 529 ret = kxcjk1013_get_mode(data, &store_mode); 530 if (ret < 0) 531 return ret; 532 533 /* This is requirement by spec to change state to STANDBY */ 534 ret = kxcjk1013_set_mode(data, STANDBY); 535 if (ret < 0) 536 return ret; 537 538 ret = kxcjk1013_chip_update_thresholds(data); 539 if (ret < 0) 540 return ret; 541 542 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1); 543 if (ret < 0) { 544 dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n"); 545 return ret; 546 } 547 548 if (status) 549 ret |= KXCJK1013_REG_INT_CTRL1_BIT_IEN; 550 else 551 ret &= ~KXCJK1013_REG_INT_CTRL1_BIT_IEN; 552 553 ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1, 554 ret); 555 if (ret < 0) { 556 dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n"); 557 return ret; 558 } 559 560 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1); 561 if (ret < 0) { 562 dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); 563 return ret; 564 } 565 566 if (status) 567 ret |= KXCJK1013_REG_CTRL1_BIT_WUFE; 568 else 569 ret &= ~KXCJK1013_REG_CTRL1_BIT_WUFE; 570 571 ret = i2c_smbus_write_byte_data(data->client, 572 KXCJK1013_REG_CTRL1, ret); 573 if (ret < 0) { 574 dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); 575 return ret; 576 } 577 578 if (store_mode == OPERATION) { 579 ret = kxcjk1013_set_mode(data, OPERATION); 580 if (ret < 0) 581 return ret; 582 } 583 584 return 0; 585 } 586 587 static int kxcjk1013_setup_new_data_interrupt(struct kxcjk1013_data *data, 588 bool status) 589 { 590 int ret; 591 enum kxcjk1013_mode store_mode; 592 593 ret = kxcjk1013_get_mode(data, &store_mode); 594 if (ret < 0) 595 return ret; 596 597 /* This is requirement by spec to change state to STANDBY */ 598 ret = kxcjk1013_set_mode(data, STANDBY); 599 if (ret < 0) 600 return ret; 601 602 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1); 603 if (ret < 0) { 604 dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n"); 605 return ret; 606 } 607 608 if (status) 609 ret |= KXCJK1013_REG_INT_CTRL1_BIT_IEN; 610 else 611 ret &= ~KXCJK1013_REG_INT_CTRL1_BIT_IEN; 612 613 ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1, 614 ret); 615 if (ret < 0) { 616 dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n"); 617 return ret; 618 } 619 620 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1); 621 if (ret < 0) { 622 dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); 623 return ret; 624 } 625 626 if (status) 627 ret |= KXCJK1013_REG_CTRL1_BIT_DRDY; 628 else 629 ret &= ~KXCJK1013_REG_CTRL1_BIT_DRDY; 630 631 ret = i2c_smbus_write_byte_data(data->client, 632 KXCJK1013_REG_CTRL1, ret); 633 if (ret < 0) { 634 dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); 635 return ret; 636 } 637 638 if (store_mode == OPERATION) { 639 ret = kxcjk1013_set_mode(data, OPERATION); 640 if (ret < 0) 641 return ret; 642 } 643 644 return 0; 645 } 646 647 static const struct kx_odr_map *kxcjk1013_find_odr_value( 648 const struct kx_odr_map *map, size_t map_size, int val, int val2) 649 { 650 int i; 651 652 for (i = 0; i < map_size; ++i) { 653 if (map[i].val == val && map[i].val2 == val2) 654 return &map[i]; 655 } 656 657 return ERR_PTR(-EINVAL); 658 } 659 660 static int kxcjk1013_convert_odr_value(const struct kx_odr_map *map, 661 size_t map_size, int odr_bits, 662 int *val, int *val2) 663 { 664 int i; 665 666 for (i = 0; i < map_size; ++i) { 667 if (map[i].odr_bits == odr_bits) { 668 *val = map[i].val; 669 *val2 = map[i].val2; 670 return IIO_VAL_INT_PLUS_MICRO; 671 } 672 } 673 674 return -EINVAL; 675 } 676 677 static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2) 678 { 679 int ret; 680 enum kxcjk1013_mode store_mode; 681 const struct kx_odr_map *odr_setting; 682 683 ret = kxcjk1013_get_mode(data, &store_mode); 684 if (ret < 0) 685 return ret; 686 687 if (data->chipset == KXTF9) 688 odr_setting = kxcjk1013_find_odr_value(kxtf9_samp_freq_table, 689 ARRAY_SIZE(kxtf9_samp_freq_table), 690 val, val2); 691 else 692 odr_setting = kxcjk1013_find_odr_value(samp_freq_table, 693 ARRAY_SIZE(samp_freq_table), 694 val, val2); 695 696 if (IS_ERR(odr_setting)) 697 return PTR_ERR(odr_setting); 698 699 /* To change ODR, the chip must be set to STANDBY as per spec */ 700 ret = kxcjk1013_set_mode(data, STANDBY); 701 if (ret < 0) 702 return ret; 703 704 ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_DATA_CTRL, 705 odr_setting->odr_bits); 706 if (ret < 0) { 707 dev_err(&data->client->dev, "Error writing data_ctrl\n"); 708 return ret; 709 } 710 711 data->odr_bits = odr_setting->odr_bits; 712 713 ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL2, 714 odr_setting->wuf_bits); 715 if (ret < 0) { 716 dev_err(&data->client->dev, "Error writing reg_ctrl2\n"); 717 return ret; 718 } 719 720 if (store_mode == OPERATION) { 721 ret = kxcjk1013_set_mode(data, OPERATION); 722 if (ret < 0) 723 return ret; 724 } 725 726 return 0; 727 } 728 729 static int kxcjk1013_get_odr(struct kxcjk1013_data *data, int *val, int *val2) 730 { 731 if (data->chipset == KXTF9) 732 return kxcjk1013_convert_odr_value(kxtf9_samp_freq_table, 733 ARRAY_SIZE(kxtf9_samp_freq_table), 734 data->odr_bits, val, val2); 735 else 736 return kxcjk1013_convert_odr_value(samp_freq_table, 737 ARRAY_SIZE(samp_freq_table), 738 data->odr_bits, val, val2); 739 } 740 741 static int kxcjk1013_get_acc_reg(struct kxcjk1013_data *data, int axis) 742 { 743 u8 reg = KXCJK1013_REG_XOUT_L + axis * 2; 744 int ret; 745 746 ret = i2c_smbus_read_word_data(data->client, reg); 747 if (ret < 0) { 748 dev_err(&data->client->dev, 749 "failed to read accel_%c registers\n", 'x' + axis); 750 return ret; 751 } 752 753 return ret; 754 } 755 756 static int kxcjk1013_set_scale(struct kxcjk1013_data *data, int val) 757 { 758 int ret, i; 759 enum kxcjk1013_mode store_mode; 760 761 for (i = 0; i < ARRAY_SIZE(KXCJK1013_scale_table); ++i) { 762 if (KXCJK1013_scale_table[i].scale == val) { 763 ret = kxcjk1013_get_mode(data, &store_mode); 764 if (ret < 0) 765 return ret; 766 767 ret = kxcjk1013_set_mode(data, STANDBY); 768 if (ret < 0) 769 return ret; 770 771 ret = kxcjk1013_set_range(data, i); 772 if (ret < 0) 773 return ret; 774 775 if (store_mode == OPERATION) { 776 ret = kxcjk1013_set_mode(data, OPERATION); 777 if (ret) 778 return ret; 779 } 780 781 return 0; 782 } 783 } 784 785 return -EINVAL; 786 } 787 788 static int kxcjk1013_read_raw(struct iio_dev *indio_dev, 789 struct iio_chan_spec const *chan, int *val, 790 int *val2, long mask) 791 { 792 struct kxcjk1013_data *data = iio_priv(indio_dev); 793 int ret; 794 795 switch (mask) { 796 case IIO_CHAN_INFO_RAW: 797 mutex_lock(&data->mutex); 798 if (iio_buffer_enabled(indio_dev)) 799 ret = -EBUSY; 800 else { 801 ret = kxcjk1013_set_power_state(data, true); 802 if (ret < 0) { 803 mutex_unlock(&data->mutex); 804 return ret; 805 } 806 ret = kxcjk1013_get_acc_reg(data, chan->scan_index); 807 if (ret < 0) { 808 kxcjk1013_set_power_state(data, false); 809 mutex_unlock(&data->mutex); 810 return ret; 811 } 812 *val = sign_extend32(ret >> 4, 11); 813 ret = kxcjk1013_set_power_state(data, false); 814 } 815 mutex_unlock(&data->mutex); 816 817 if (ret < 0) 818 return ret; 819 820 return IIO_VAL_INT; 821 822 case IIO_CHAN_INFO_SCALE: 823 *val = 0; 824 *val2 = KXCJK1013_scale_table[data->range].scale; 825 return IIO_VAL_INT_PLUS_MICRO; 826 827 case IIO_CHAN_INFO_SAMP_FREQ: 828 mutex_lock(&data->mutex); 829 ret = kxcjk1013_get_odr(data, val, val2); 830 mutex_unlock(&data->mutex); 831 return ret; 832 833 default: 834 return -EINVAL; 835 } 836 } 837 838 static int kxcjk1013_write_raw(struct iio_dev *indio_dev, 839 struct iio_chan_spec const *chan, int val, 840 int val2, long mask) 841 { 842 struct kxcjk1013_data *data = iio_priv(indio_dev); 843 int ret; 844 845 switch (mask) { 846 case IIO_CHAN_INFO_SAMP_FREQ: 847 mutex_lock(&data->mutex); 848 ret = kxcjk1013_set_odr(data, val, val2); 849 mutex_unlock(&data->mutex); 850 break; 851 case IIO_CHAN_INFO_SCALE: 852 if (val) 853 return -EINVAL; 854 855 mutex_lock(&data->mutex); 856 ret = kxcjk1013_set_scale(data, val2); 857 mutex_unlock(&data->mutex); 858 break; 859 default: 860 ret = -EINVAL; 861 } 862 863 return ret; 864 } 865 866 static int kxcjk1013_read_event(struct iio_dev *indio_dev, 867 const struct iio_chan_spec *chan, 868 enum iio_event_type type, 869 enum iio_event_direction dir, 870 enum iio_event_info info, 871 int *val, int *val2) 872 { 873 struct kxcjk1013_data *data = iio_priv(indio_dev); 874 875 *val2 = 0; 876 switch (info) { 877 case IIO_EV_INFO_VALUE: 878 *val = data->wake_thres; 879 break; 880 case IIO_EV_INFO_PERIOD: 881 *val = data->wake_dur; 882 break; 883 default: 884 return -EINVAL; 885 } 886 887 return IIO_VAL_INT; 888 } 889 890 static int kxcjk1013_write_event(struct iio_dev *indio_dev, 891 const struct iio_chan_spec *chan, 892 enum iio_event_type type, 893 enum iio_event_direction dir, 894 enum iio_event_info info, 895 int val, int val2) 896 { 897 struct kxcjk1013_data *data = iio_priv(indio_dev); 898 899 if (data->ev_enable_state) 900 return -EBUSY; 901 902 switch (info) { 903 case IIO_EV_INFO_VALUE: 904 data->wake_thres = val; 905 break; 906 case IIO_EV_INFO_PERIOD: 907 data->wake_dur = val; 908 break; 909 default: 910 return -EINVAL; 911 } 912 913 return 0; 914 } 915 916 static int kxcjk1013_read_event_config(struct iio_dev *indio_dev, 917 const struct iio_chan_spec *chan, 918 enum iio_event_type type, 919 enum iio_event_direction dir) 920 { 921 struct kxcjk1013_data *data = iio_priv(indio_dev); 922 923 return data->ev_enable_state; 924 } 925 926 static int kxcjk1013_write_event_config(struct iio_dev *indio_dev, 927 const struct iio_chan_spec *chan, 928 enum iio_event_type type, 929 enum iio_event_direction dir, 930 int state) 931 { 932 struct kxcjk1013_data *data = iio_priv(indio_dev); 933 int ret; 934 935 if (state && data->ev_enable_state) 936 return 0; 937 938 mutex_lock(&data->mutex); 939 940 if (!state && data->motion_trigger_on) { 941 data->ev_enable_state = 0; 942 mutex_unlock(&data->mutex); 943 return 0; 944 } 945 946 /* 947 * We will expect the enable and disable to do operation in 948 * in reverse order. This will happen here anyway as our 949 * resume operation uses sync mode runtime pm calls, the 950 * suspend operation will be delayed by autosuspend delay 951 * So the disable operation will still happen in reverse of 952 * enable operation. When runtime pm is disabled the mode 953 * is always on so sequence doesn't matter 954 */ 955 ret = kxcjk1013_set_power_state(data, state); 956 if (ret < 0) { 957 mutex_unlock(&data->mutex); 958 return ret; 959 } 960 961 ret = kxcjk1013_setup_any_motion_interrupt(data, state); 962 if (ret < 0) { 963 kxcjk1013_set_power_state(data, false); 964 data->ev_enable_state = 0; 965 mutex_unlock(&data->mutex); 966 return ret; 967 } 968 969 data->ev_enable_state = state; 970 mutex_unlock(&data->mutex); 971 972 return 0; 973 } 974 975 static int kxcjk1013_buffer_preenable(struct iio_dev *indio_dev) 976 { 977 struct kxcjk1013_data *data = iio_priv(indio_dev); 978 979 return kxcjk1013_set_power_state(data, true); 980 } 981 982 static int kxcjk1013_buffer_postdisable(struct iio_dev *indio_dev) 983 { 984 struct kxcjk1013_data *data = iio_priv(indio_dev); 985 986 return kxcjk1013_set_power_state(data, false); 987 } 988 989 static ssize_t kxcjk1013_get_samp_freq_avail(struct device *dev, 990 struct device_attribute *attr, 991 char *buf) 992 { 993 struct iio_dev *indio_dev = dev_to_iio_dev(dev); 994 struct kxcjk1013_data *data = iio_priv(indio_dev); 995 const char *str; 996 997 if (data->chipset == KXTF9) 998 str = kxtf9_samp_freq_avail; 999 else 1000 str = kxcjk1013_samp_freq_avail; 1001 1002 return sprintf(buf, "%s\n", str); 1003 } 1004 1005 static IIO_DEVICE_ATTR(in_accel_sampling_frequency_available, S_IRUGO, 1006 kxcjk1013_get_samp_freq_avail, NULL, 0); 1007 1008 static IIO_CONST_ATTR(in_accel_scale_available, "0.009582 0.019163 0.038326"); 1009 1010 static struct attribute *kxcjk1013_attributes[] = { 1011 &iio_dev_attr_in_accel_sampling_frequency_available.dev_attr.attr, 1012 &iio_const_attr_in_accel_scale_available.dev_attr.attr, 1013 NULL, 1014 }; 1015 1016 static const struct attribute_group kxcjk1013_attrs_group = { 1017 .attrs = kxcjk1013_attributes, 1018 }; 1019 1020 static const struct iio_event_spec kxcjk1013_event = { 1021 .type = IIO_EV_TYPE_THRESH, 1022 .dir = IIO_EV_DIR_EITHER, 1023 .mask_separate = BIT(IIO_EV_INFO_VALUE) | 1024 BIT(IIO_EV_INFO_ENABLE) | 1025 BIT(IIO_EV_INFO_PERIOD) 1026 }; 1027 1028 static const struct iio_mount_matrix * 1029 kxcjk1013_get_mount_matrix(const struct iio_dev *indio_dev, 1030 const struct iio_chan_spec *chan) 1031 { 1032 struct kxcjk1013_data *data = iio_priv(indio_dev); 1033 1034 return &data->orientation; 1035 } 1036 1037 static const struct iio_chan_spec_ext_info kxcjk1013_ext_info[] = { 1038 IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, kxcjk1013_get_mount_matrix), 1039 { } 1040 }; 1041 1042 #define KXCJK1013_CHANNEL(_axis) { \ 1043 .type = IIO_ACCEL, \ 1044 .modified = 1, \ 1045 .channel2 = IIO_MOD_##_axis, \ 1046 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 1047 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ 1048 BIT(IIO_CHAN_INFO_SAMP_FREQ), \ 1049 .scan_index = AXIS_##_axis, \ 1050 .scan_type = { \ 1051 .sign = 's', \ 1052 .realbits = 12, \ 1053 .storagebits = 16, \ 1054 .shift = 4, \ 1055 .endianness = IIO_LE, \ 1056 }, \ 1057 .event_spec = &kxcjk1013_event, \ 1058 .ext_info = kxcjk1013_ext_info, \ 1059 .num_event_specs = 1 \ 1060 } 1061 1062 static const struct iio_chan_spec kxcjk1013_channels[] = { 1063 KXCJK1013_CHANNEL(X), 1064 KXCJK1013_CHANNEL(Y), 1065 KXCJK1013_CHANNEL(Z), 1066 IIO_CHAN_SOFT_TIMESTAMP(3), 1067 }; 1068 1069 static const struct iio_buffer_setup_ops kxcjk1013_buffer_setup_ops = { 1070 .preenable = kxcjk1013_buffer_preenable, 1071 .postdisable = kxcjk1013_buffer_postdisable, 1072 }; 1073 1074 static const struct iio_info kxcjk1013_info = { 1075 .attrs = &kxcjk1013_attrs_group, 1076 .read_raw = kxcjk1013_read_raw, 1077 .write_raw = kxcjk1013_write_raw, 1078 .read_event_value = kxcjk1013_read_event, 1079 .write_event_value = kxcjk1013_write_event, 1080 .write_event_config = kxcjk1013_write_event_config, 1081 .read_event_config = kxcjk1013_read_event_config, 1082 }; 1083 1084 static const unsigned long kxcjk1013_scan_masks[] = {0x7, 0}; 1085 1086 static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p) 1087 { 1088 struct iio_poll_func *pf = p; 1089 struct iio_dev *indio_dev = pf->indio_dev; 1090 struct kxcjk1013_data *data = iio_priv(indio_dev); 1091 int ret; 1092 1093 mutex_lock(&data->mutex); 1094 ret = i2c_smbus_read_i2c_block_data_or_emulated(data->client, 1095 KXCJK1013_REG_XOUT_L, 1096 AXIS_MAX * 2, 1097 (u8 *)data->buffer); 1098 mutex_unlock(&data->mutex); 1099 if (ret < 0) 1100 goto err; 1101 1102 iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, 1103 data->timestamp); 1104 err: 1105 iio_trigger_notify_done(indio_dev->trig); 1106 1107 return IRQ_HANDLED; 1108 } 1109 1110 static void kxcjk1013_trig_reen(struct iio_trigger *trig) 1111 { 1112 struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); 1113 struct kxcjk1013_data *data = iio_priv(indio_dev); 1114 int ret; 1115 1116 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL); 1117 if (ret < 0) 1118 dev_err(&data->client->dev, "Error reading reg_int_rel\n"); 1119 } 1120 1121 static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig, 1122 bool state) 1123 { 1124 struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); 1125 struct kxcjk1013_data *data = iio_priv(indio_dev); 1126 int ret; 1127 1128 mutex_lock(&data->mutex); 1129 1130 if (!state && data->ev_enable_state && data->motion_trigger_on) { 1131 data->motion_trigger_on = false; 1132 mutex_unlock(&data->mutex); 1133 return 0; 1134 } 1135 1136 ret = kxcjk1013_set_power_state(data, state); 1137 if (ret < 0) { 1138 mutex_unlock(&data->mutex); 1139 return ret; 1140 } 1141 if (data->motion_trig == trig) 1142 ret = kxcjk1013_setup_any_motion_interrupt(data, state); 1143 else 1144 ret = kxcjk1013_setup_new_data_interrupt(data, state); 1145 if (ret < 0) { 1146 kxcjk1013_set_power_state(data, false); 1147 mutex_unlock(&data->mutex); 1148 return ret; 1149 } 1150 if (data->motion_trig == trig) 1151 data->motion_trigger_on = state; 1152 else 1153 data->dready_trigger_on = state; 1154 1155 mutex_unlock(&data->mutex); 1156 1157 return 0; 1158 } 1159 1160 static const struct iio_trigger_ops kxcjk1013_trigger_ops = { 1161 .set_trigger_state = kxcjk1013_data_rdy_trigger_set_state, 1162 .reenable = kxcjk1013_trig_reen, 1163 }; 1164 1165 static void kxcjk1013_report_motion_event(struct iio_dev *indio_dev) 1166 { 1167 struct kxcjk1013_data *data = iio_priv(indio_dev); 1168 1169 int ret = i2c_smbus_read_byte_data(data->client, 1170 KXCJK1013_REG_INT_SRC2); 1171 if (ret < 0) { 1172 dev_err(&data->client->dev, "Error reading reg_int_src2\n"); 1173 return; 1174 } 1175 1176 if (ret & KXCJK1013_REG_INT_SRC2_BIT_XN) 1177 iio_push_event(indio_dev, 1178 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1179 0, 1180 IIO_MOD_X, 1181 IIO_EV_TYPE_THRESH, 1182 IIO_EV_DIR_FALLING), 1183 data->timestamp); 1184 1185 if (ret & KXCJK1013_REG_INT_SRC2_BIT_XP) 1186 iio_push_event(indio_dev, 1187 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1188 0, 1189 IIO_MOD_X, 1190 IIO_EV_TYPE_THRESH, 1191 IIO_EV_DIR_RISING), 1192 data->timestamp); 1193 1194 if (ret & KXCJK1013_REG_INT_SRC2_BIT_YN) 1195 iio_push_event(indio_dev, 1196 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1197 0, 1198 IIO_MOD_Y, 1199 IIO_EV_TYPE_THRESH, 1200 IIO_EV_DIR_FALLING), 1201 data->timestamp); 1202 1203 if (ret & KXCJK1013_REG_INT_SRC2_BIT_YP) 1204 iio_push_event(indio_dev, 1205 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1206 0, 1207 IIO_MOD_Y, 1208 IIO_EV_TYPE_THRESH, 1209 IIO_EV_DIR_RISING), 1210 data->timestamp); 1211 1212 if (ret & KXCJK1013_REG_INT_SRC2_BIT_ZN) 1213 iio_push_event(indio_dev, 1214 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1215 0, 1216 IIO_MOD_Z, 1217 IIO_EV_TYPE_THRESH, 1218 IIO_EV_DIR_FALLING), 1219 data->timestamp); 1220 1221 if (ret & KXCJK1013_REG_INT_SRC2_BIT_ZP) 1222 iio_push_event(indio_dev, 1223 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1224 0, 1225 IIO_MOD_Z, 1226 IIO_EV_TYPE_THRESH, 1227 IIO_EV_DIR_RISING), 1228 data->timestamp); 1229 } 1230 1231 static irqreturn_t kxcjk1013_event_handler(int irq, void *private) 1232 { 1233 struct iio_dev *indio_dev = private; 1234 struct kxcjk1013_data *data = iio_priv(indio_dev); 1235 int ret; 1236 1237 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_SRC1); 1238 if (ret < 0) { 1239 dev_err(&data->client->dev, "Error reading reg_int_src1\n"); 1240 goto ack_intr; 1241 } 1242 1243 if (ret & KXCJK1013_REG_INT_SRC1_BIT_WUFS) { 1244 if (data->chipset == KXTF9) 1245 iio_push_event(indio_dev, 1246 IIO_MOD_EVENT_CODE(IIO_ACCEL, 1247 0, 1248 IIO_MOD_X_AND_Y_AND_Z, 1249 IIO_EV_TYPE_THRESH, 1250 IIO_EV_DIR_RISING), 1251 data->timestamp); 1252 else 1253 kxcjk1013_report_motion_event(indio_dev); 1254 } 1255 1256 ack_intr: 1257 if (data->dready_trigger_on) 1258 return IRQ_HANDLED; 1259 1260 ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL); 1261 if (ret < 0) 1262 dev_err(&data->client->dev, "Error reading reg_int_rel\n"); 1263 1264 return IRQ_HANDLED; 1265 } 1266 1267 static irqreturn_t kxcjk1013_data_rdy_trig_poll(int irq, void *private) 1268 { 1269 struct iio_dev *indio_dev = private; 1270 struct kxcjk1013_data *data = iio_priv(indio_dev); 1271 1272 data->timestamp = iio_get_time_ns(indio_dev); 1273 1274 if (data->dready_trigger_on) 1275 iio_trigger_poll(data->dready_trig); 1276 else if (data->motion_trigger_on) 1277 iio_trigger_poll(data->motion_trig); 1278 1279 if (data->ev_enable_state) 1280 return IRQ_WAKE_THREAD; 1281 else 1282 return IRQ_HANDLED; 1283 } 1284 1285 static const char *kxcjk1013_match_acpi_device(struct device *dev, 1286 enum kx_chipset *chipset, 1287 enum kx_acpi_type *acpi_type, 1288 const char **label) 1289 { 1290 const struct acpi_device_id *id; 1291 1292 id = acpi_match_device(dev->driver->acpi_match_table, dev); 1293 if (!id) 1294 return NULL; 1295 1296 if (strcmp(id->id, "SMO8500") == 0) { 1297 *acpi_type = ACPI_SMO8500; 1298 } else if (strcmp(id->id, "KIOX010A") == 0) { 1299 *acpi_type = ACPI_KIOX010A; 1300 *label = "accel-display"; 1301 } else if (strcmp(id->id, "KIOX020A") == 0) { 1302 *label = "accel-base"; 1303 } 1304 1305 *chipset = (enum kx_chipset)id->driver_data; 1306 1307 return dev_name(dev); 1308 } 1309 1310 static void kxcjk1013_disable_regulators(void *d) 1311 { 1312 struct kxcjk1013_data *data = d; 1313 1314 regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators); 1315 } 1316 1317 static int kxcjk1013_probe(struct i2c_client *client, 1318 const struct i2c_device_id *id) 1319 { 1320 struct kxcjk1013_data *data; 1321 struct iio_dev *indio_dev; 1322 struct kxcjk_1013_platform_data *pdata; 1323 const char *name; 1324 int ret; 1325 1326 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); 1327 if (!indio_dev) 1328 return -ENOMEM; 1329 1330 data = iio_priv(indio_dev); 1331 i2c_set_clientdata(client, indio_dev); 1332 data->client = client; 1333 1334 pdata = dev_get_platdata(&client->dev); 1335 if (pdata) { 1336 data->active_high_intr = pdata->active_high_intr; 1337 data->orientation = pdata->orientation; 1338 } else { 1339 data->active_high_intr = true; /* default polarity */ 1340 1341 ret = iio_read_mount_matrix(&client->dev, "mount-matrix", 1342 &data->orientation); 1343 if (ret) 1344 return ret; 1345 } 1346 1347 data->regulators[0].supply = "vdd"; 1348 data->regulators[1].supply = "vddio"; 1349 ret = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(data->regulators), 1350 data->regulators); 1351 if (ret) 1352 return dev_err_probe(&client->dev, ret, "Failed to get regulators\n"); 1353 1354 ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators), 1355 data->regulators); 1356 if (ret) 1357 return ret; 1358 1359 ret = devm_add_action_or_reset(&client->dev, kxcjk1013_disable_regulators, data); 1360 if (ret) 1361 return ret; 1362 1363 /* 1364 * A typical delay of 10ms is required for powering up 1365 * according to the data sheets of supported chips. 1366 * Hence double that to play safe. 1367 */ 1368 msleep(20); 1369 1370 if (id) { 1371 data->chipset = (enum kx_chipset)(id->driver_data); 1372 name = id->name; 1373 } else if (ACPI_HANDLE(&client->dev)) { 1374 name = kxcjk1013_match_acpi_device(&client->dev, 1375 &data->chipset, 1376 &data->acpi_type, 1377 &indio_dev->label); 1378 } else 1379 return -ENODEV; 1380 1381 ret = kxcjk1013_chip_init(data); 1382 if (ret < 0) 1383 return ret; 1384 1385 mutex_init(&data->mutex); 1386 1387 indio_dev->channels = kxcjk1013_channels; 1388 indio_dev->num_channels = ARRAY_SIZE(kxcjk1013_channels); 1389 indio_dev->available_scan_masks = kxcjk1013_scan_masks; 1390 indio_dev->name = name; 1391 indio_dev->modes = INDIO_DIRECT_MODE; 1392 indio_dev->info = &kxcjk1013_info; 1393 1394 if (client->irq > 0 && data->acpi_type != ACPI_SMO8500) { 1395 ret = devm_request_threaded_irq(&client->dev, client->irq, 1396 kxcjk1013_data_rdy_trig_poll, 1397 kxcjk1013_event_handler, 1398 IRQF_TRIGGER_RISING, 1399 KXCJK1013_IRQ_NAME, 1400 indio_dev); 1401 if (ret) 1402 goto err_poweroff; 1403 1404 data->dready_trig = devm_iio_trigger_alloc(&client->dev, 1405 "%s-dev%d", 1406 indio_dev->name, 1407 indio_dev->id); 1408 if (!data->dready_trig) { 1409 ret = -ENOMEM; 1410 goto err_poweroff; 1411 } 1412 1413 data->motion_trig = devm_iio_trigger_alloc(&client->dev, 1414 "%s-any-motion-dev%d", 1415 indio_dev->name, 1416 indio_dev->id); 1417 if (!data->motion_trig) { 1418 ret = -ENOMEM; 1419 goto err_poweroff; 1420 } 1421 1422 data->dready_trig->dev.parent = &client->dev; 1423 data->dready_trig->ops = &kxcjk1013_trigger_ops; 1424 iio_trigger_set_drvdata(data->dready_trig, indio_dev); 1425 indio_dev->trig = data->dready_trig; 1426 iio_trigger_get(indio_dev->trig); 1427 ret = iio_trigger_register(data->dready_trig); 1428 if (ret) 1429 goto err_poweroff; 1430 1431 data->motion_trig->dev.parent = &client->dev; 1432 data->motion_trig->ops = &kxcjk1013_trigger_ops; 1433 iio_trigger_set_drvdata(data->motion_trig, indio_dev); 1434 ret = iio_trigger_register(data->motion_trig); 1435 if (ret) { 1436 data->motion_trig = NULL; 1437 goto err_trigger_unregister; 1438 } 1439 } 1440 1441 ret = iio_triggered_buffer_setup(indio_dev, 1442 &iio_pollfunc_store_time, 1443 kxcjk1013_trigger_handler, 1444 &kxcjk1013_buffer_setup_ops); 1445 if (ret < 0) { 1446 dev_err(&client->dev, "iio triggered buffer setup failed\n"); 1447 goto err_trigger_unregister; 1448 } 1449 1450 ret = pm_runtime_set_active(&client->dev); 1451 if (ret) 1452 goto err_buffer_cleanup; 1453 1454 pm_runtime_enable(&client->dev); 1455 pm_runtime_set_autosuspend_delay(&client->dev, 1456 KXCJK1013_SLEEP_DELAY_MS); 1457 pm_runtime_use_autosuspend(&client->dev); 1458 1459 ret = iio_device_register(indio_dev); 1460 if (ret < 0) { 1461 dev_err(&client->dev, "unable to register iio device\n"); 1462 goto err_buffer_cleanup; 1463 } 1464 1465 return 0; 1466 1467 err_buffer_cleanup: 1468 if (data->dready_trig) 1469 iio_triggered_buffer_cleanup(indio_dev); 1470 err_trigger_unregister: 1471 if (data->dready_trig) 1472 iio_trigger_unregister(data->dready_trig); 1473 if (data->motion_trig) 1474 iio_trigger_unregister(data->motion_trig); 1475 err_poweroff: 1476 kxcjk1013_set_mode(data, STANDBY); 1477 1478 return ret; 1479 } 1480 1481 static int kxcjk1013_remove(struct i2c_client *client) 1482 { 1483 struct iio_dev *indio_dev = i2c_get_clientdata(client); 1484 struct kxcjk1013_data *data = iio_priv(indio_dev); 1485 1486 iio_device_unregister(indio_dev); 1487 1488 pm_runtime_disable(&client->dev); 1489 pm_runtime_set_suspended(&client->dev); 1490 pm_runtime_put_noidle(&client->dev); 1491 1492 if (data->dready_trig) { 1493 iio_triggered_buffer_cleanup(indio_dev); 1494 iio_trigger_unregister(data->dready_trig); 1495 iio_trigger_unregister(data->motion_trig); 1496 } 1497 1498 mutex_lock(&data->mutex); 1499 kxcjk1013_set_mode(data, STANDBY); 1500 mutex_unlock(&data->mutex); 1501 1502 return 0; 1503 } 1504 1505 #ifdef CONFIG_PM_SLEEP 1506 static int kxcjk1013_suspend(struct device *dev) 1507 { 1508 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); 1509 struct kxcjk1013_data *data = iio_priv(indio_dev); 1510 int ret; 1511 1512 mutex_lock(&data->mutex); 1513 ret = kxcjk1013_set_mode(data, STANDBY); 1514 mutex_unlock(&data->mutex); 1515 1516 return ret; 1517 } 1518 1519 static int kxcjk1013_resume(struct device *dev) 1520 { 1521 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); 1522 struct kxcjk1013_data *data = iio_priv(indio_dev); 1523 int ret = 0; 1524 1525 mutex_lock(&data->mutex); 1526 ret = kxcjk1013_set_mode(data, OPERATION); 1527 if (ret == 0) 1528 ret = kxcjk1013_set_range(data, data->range); 1529 mutex_unlock(&data->mutex); 1530 1531 return ret; 1532 } 1533 #endif 1534 1535 #ifdef CONFIG_PM 1536 static int kxcjk1013_runtime_suspend(struct device *dev) 1537 { 1538 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); 1539 struct kxcjk1013_data *data = iio_priv(indio_dev); 1540 int ret; 1541 1542 ret = kxcjk1013_set_mode(data, STANDBY); 1543 if (ret < 0) { 1544 dev_err(&data->client->dev, "powering off device failed\n"); 1545 return -EAGAIN; 1546 } 1547 return 0; 1548 } 1549 1550 static int kxcjk1013_runtime_resume(struct device *dev) 1551 { 1552 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); 1553 struct kxcjk1013_data *data = iio_priv(indio_dev); 1554 int ret; 1555 int sleep_val; 1556 1557 ret = kxcjk1013_set_mode(data, OPERATION); 1558 if (ret < 0) 1559 return ret; 1560 1561 sleep_val = kxcjk1013_get_startup_times(data); 1562 if (sleep_val < 20000) 1563 usleep_range(sleep_val, 20000); 1564 else 1565 msleep_interruptible(sleep_val/1000); 1566 1567 return 0; 1568 } 1569 #endif 1570 1571 static const struct dev_pm_ops kxcjk1013_pm_ops = { 1572 SET_SYSTEM_SLEEP_PM_OPS(kxcjk1013_suspend, kxcjk1013_resume) 1573 SET_RUNTIME_PM_OPS(kxcjk1013_runtime_suspend, 1574 kxcjk1013_runtime_resume, NULL) 1575 }; 1576 1577 static const struct acpi_device_id kx_acpi_match[] = { 1578 {"KXCJ1013", KXCJK1013}, 1579 {"KXCJ1008", KXCJ91008}, 1580 {"KXCJ9000", KXCJ91008}, 1581 {"KIOX0008", KXCJ91008}, 1582 {"KIOX0009", KXTJ21009}, 1583 {"KIOX000A", KXCJ91008}, 1584 {"KIOX010A", KXCJ91008}, /* KXCJ91008 in the display of a yoga 2-in-1 */ 1585 {"KIOX020A", KXCJ91008}, /* KXCJ91008 in the base of a yoga 2-in-1 */ 1586 {"KXTJ1009", KXTJ21009}, 1587 {"KXJ2109", KXTJ21009}, 1588 {"SMO8500", KXCJ91008}, 1589 { }, 1590 }; 1591 MODULE_DEVICE_TABLE(acpi, kx_acpi_match); 1592 1593 static const struct i2c_device_id kxcjk1013_id[] = { 1594 {"kxcjk1013", KXCJK1013}, 1595 {"kxcj91008", KXCJ91008}, 1596 {"kxtj21009", KXTJ21009}, 1597 {"kxtf9", KXTF9}, 1598 {"SMO8500", KXCJ91008}, 1599 {} 1600 }; 1601 1602 MODULE_DEVICE_TABLE(i2c, kxcjk1013_id); 1603 1604 static const struct of_device_id kxcjk1013_of_match[] = { 1605 { .compatible = "kionix,kxcjk1013", }, 1606 { .compatible = "kionix,kxcj91008", }, 1607 { .compatible = "kionix,kxtj21009", }, 1608 { .compatible = "kionix,kxtf9", }, 1609 { } 1610 }; 1611 MODULE_DEVICE_TABLE(of, kxcjk1013_of_match); 1612 1613 static struct i2c_driver kxcjk1013_driver = { 1614 .driver = { 1615 .name = KXCJK1013_DRV_NAME, 1616 .acpi_match_table = ACPI_PTR(kx_acpi_match), 1617 .of_match_table = kxcjk1013_of_match, 1618 .pm = &kxcjk1013_pm_ops, 1619 }, 1620 .probe = kxcjk1013_probe, 1621 .remove = kxcjk1013_remove, 1622 .id_table = kxcjk1013_id, 1623 }; 1624 module_i2c_driver(kxcjk1013_driver); 1625 1626 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); 1627 MODULE_LICENSE("GPL v2"); 1628 MODULE_DESCRIPTION("KXCJK1013 accelerometer driver"); 1629