1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2022 ROHM Semiconductors 4 * 5 * ROHM/KIONIX KX022A accelerometer driver 6 */ 7 8 #include <linux/delay.h> 9 #include <linux/device.h> 10 #include <linux/interrupt.h> 11 #include <linux/module.h> 12 #include <linux/moduleparam.h> 13 #include <linux/mutex.h> 14 #include <linux/property.h> 15 #include <linux/regmap.h> 16 #include <linux/regulator/consumer.h> 17 #include <linux/slab.h> 18 #include <linux/string_helpers.h> 19 #include <linux/units.h> 20 21 #include <linux/iio/iio.h> 22 #include <linux/iio/sysfs.h> 23 #include <linux/iio/trigger.h> 24 #include <linux/iio/trigger_consumer.h> 25 #include <linux/iio/triggered_buffer.h> 26 27 #include "kionix-kx022a.h" 28 29 /* 30 * The KX022A has FIFO which can store 43 samples of HiRes data from 2 31 * channels. This equals to 43 (samples) * 3 (channels) * 2 (bytes/sample) to 32 * 258 bytes of sample data. The quirk to know is that the amount of bytes in 33 * the FIFO is advertised via 8 bit register (max value 255). The thing to note 34 * is that full 258 bytes of data is indicated using the max value 255. 35 */ 36 #define KX022A_FIFO_LENGTH 43 37 #define KX022A_FIFO_FULL_VALUE 255 38 #define KX022A_SOFT_RESET_WAIT_TIME_US (5 * USEC_PER_MSEC) 39 #define KX022A_SOFT_RESET_TOTAL_WAIT_TIME_US (500 * USEC_PER_MSEC) 40 41 /* 3 axis, 2 bytes of data for each of the axis */ 42 #define KX022A_FIFO_SAMPLES_SIZE_BYTES 6 43 #define KX022A_FIFO_MAX_BYTES \ 44 (KX022A_FIFO_LENGTH * KX022A_FIFO_SAMPLES_SIZE_BYTES) 45 46 enum { 47 KX022A_STATE_SAMPLE, 48 KX022A_STATE_FIFO, 49 }; 50 51 /* Regmap configs */ 52 static const struct regmap_range kx022a_volatile_ranges[] = { 53 { 54 .range_min = KX022A_REG_XHP_L, 55 .range_max = KX022A_REG_COTR, 56 }, { 57 .range_min = KX022A_REG_TSCP, 58 .range_max = KX022A_REG_INT_REL, 59 }, { 60 /* The reset bit will be cleared by sensor */ 61 .range_min = KX022A_REG_CNTL2, 62 .range_max = KX022A_REG_CNTL2, 63 }, { 64 .range_min = KX022A_REG_BUF_STATUS_1, 65 .range_max = KX022A_REG_BUF_READ, 66 }, 67 }; 68 69 static const struct regmap_access_table kx022a_volatile_regs = { 70 .yes_ranges = &kx022a_volatile_ranges[0], 71 .n_yes_ranges = ARRAY_SIZE(kx022a_volatile_ranges), 72 }; 73 74 static const struct regmap_range kx022a_precious_ranges[] = { 75 { 76 .range_min = KX022A_REG_INT_REL, 77 .range_max = KX022A_REG_INT_REL, 78 }, 79 }; 80 81 static const struct regmap_access_table kx022a_precious_regs = { 82 .yes_ranges = &kx022a_precious_ranges[0], 83 .n_yes_ranges = ARRAY_SIZE(kx022a_precious_ranges), 84 }; 85 86 /* 87 * The HW does not set WHO_AM_I reg as read-only but we don't want to write it 88 * so we still include it in the read-only ranges. 89 */ 90 static const struct regmap_range kx022a_read_only_ranges[] = { 91 { 92 .range_min = KX022A_REG_XHP_L, 93 .range_max = KX022A_REG_INT_REL, 94 }, { 95 .range_min = KX022A_REG_BUF_STATUS_1, 96 .range_max = KX022A_REG_BUF_STATUS_2, 97 }, { 98 .range_min = KX022A_REG_BUF_READ, 99 .range_max = KX022A_REG_BUF_READ, 100 }, 101 }; 102 103 static const struct regmap_access_table kx022a_ro_regs = { 104 .no_ranges = &kx022a_read_only_ranges[0], 105 .n_no_ranges = ARRAY_SIZE(kx022a_read_only_ranges), 106 }; 107 108 static const struct regmap_range kx022a_write_only_ranges[] = { 109 { 110 .range_min = KX022A_REG_BTS_WUF_TH, 111 .range_max = KX022A_REG_BTS_WUF_TH, 112 }, { 113 .range_min = KX022A_REG_MAN_WAKE, 114 .range_max = KX022A_REG_MAN_WAKE, 115 }, { 116 .range_min = KX022A_REG_SELF_TEST, 117 .range_max = KX022A_REG_SELF_TEST, 118 }, { 119 .range_min = KX022A_REG_BUF_CLEAR, 120 .range_max = KX022A_REG_BUF_CLEAR, 121 }, 122 }; 123 124 static const struct regmap_access_table kx022a_wo_regs = { 125 .no_ranges = &kx022a_write_only_ranges[0], 126 .n_no_ranges = ARRAY_SIZE(kx022a_write_only_ranges), 127 }; 128 129 static const struct regmap_range kx022a_noinc_read_ranges[] = { 130 { 131 .range_min = KX022A_REG_BUF_READ, 132 .range_max = KX022A_REG_BUF_READ, 133 }, 134 }; 135 136 static const struct regmap_access_table kx022a_nir_regs = { 137 .yes_ranges = &kx022a_noinc_read_ranges[0], 138 .n_yes_ranges = ARRAY_SIZE(kx022a_noinc_read_ranges), 139 }; 140 141 const struct regmap_config kx022a_regmap = { 142 .reg_bits = 8, 143 .val_bits = 8, 144 .volatile_table = &kx022a_volatile_regs, 145 .rd_table = &kx022a_wo_regs, 146 .wr_table = &kx022a_ro_regs, 147 .rd_noinc_table = &kx022a_nir_regs, 148 .precious_table = &kx022a_precious_regs, 149 .max_register = KX022A_MAX_REGISTER, 150 .cache_type = REGCACHE_RBTREE, 151 }; 152 EXPORT_SYMBOL_NS_GPL(kx022a_regmap, IIO_KX022A); 153 154 struct kx022a_data { 155 struct regmap *regmap; 156 struct iio_trigger *trig; 157 struct device *dev; 158 struct iio_mount_matrix orientation; 159 int64_t timestamp, old_timestamp; 160 161 int irq; 162 int inc_reg; 163 int ien_reg; 164 165 unsigned int state; 166 unsigned int odr_ns; 167 168 bool trigger_enabled; 169 /* 170 * Prevent toggling the sensor stby/active state (PC1 bit) in the 171 * middle of a configuration, or when the fifo is enabled. Also, 172 * protect the data stored/retrieved from this structure from 173 * concurrent accesses. 174 */ 175 struct mutex mutex; 176 u8 watermark; 177 178 /* 3 x 16bit accel data + timestamp */ 179 __le16 buffer[8] __aligned(IIO_DMA_MINALIGN); 180 struct { 181 __le16 channels[3]; 182 s64 ts __aligned(8); 183 } scan; 184 }; 185 186 static const struct iio_mount_matrix * 187 kx022a_get_mount_matrix(const struct iio_dev *idev, 188 const struct iio_chan_spec *chan) 189 { 190 struct kx022a_data *data = iio_priv(idev); 191 192 return &data->orientation; 193 } 194 195 enum { 196 AXIS_X, 197 AXIS_Y, 198 AXIS_Z, 199 AXIS_MAX 200 }; 201 202 static const unsigned long kx022a_scan_masks[] = { 203 BIT(AXIS_X) | BIT(AXIS_Y) | BIT(AXIS_Z), 0 204 }; 205 206 static const struct iio_chan_spec_ext_info kx022a_ext_info[] = { 207 IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, kx022a_get_mount_matrix), 208 { } 209 }; 210 211 #define KX022A_ACCEL_CHAN(axis, index) \ 212 { \ 213 .type = IIO_ACCEL, \ 214 .modified = 1, \ 215 .channel2 = IIO_MOD_##axis, \ 216 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 217 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ 218 BIT(IIO_CHAN_INFO_SAMP_FREQ), \ 219 .info_mask_shared_by_type_available = \ 220 BIT(IIO_CHAN_INFO_SCALE) | \ 221 BIT(IIO_CHAN_INFO_SAMP_FREQ), \ 222 .ext_info = kx022a_ext_info, \ 223 .address = KX022A_REG_##axis##OUT_L, \ 224 .scan_index = index, \ 225 .scan_type = { \ 226 .sign = 's', \ 227 .realbits = 16, \ 228 .storagebits = 16, \ 229 .endianness = IIO_LE, \ 230 }, \ 231 } 232 233 static const struct iio_chan_spec kx022a_channels[] = { 234 KX022A_ACCEL_CHAN(X, 0), 235 KX022A_ACCEL_CHAN(Y, 1), 236 KX022A_ACCEL_CHAN(Z, 2), 237 IIO_CHAN_SOFT_TIMESTAMP(3), 238 }; 239 240 /* 241 * The sensor HW can support ODR up to 1600 Hz, which is beyond what most of the 242 * Linux CPUs can handle without dropping samples. Also, the low power mode is 243 * not available for higher sample rates. Thus, the driver only supports 200 Hz 244 * and slower ODRs. The slowest is 0.78 Hz. 245 */ 246 static const int kx022a_accel_samp_freq_table[][2] = { 247 { 0, 780000 }, 248 { 1, 563000 }, 249 { 3, 125000 }, 250 { 6, 250000 }, 251 { 12, 500000 }, 252 { 25, 0 }, 253 { 50, 0 }, 254 { 100, 0 }, 255 { 200, 0 }, 256 }; 257 258 static const unsigned int kx022a_odrs[] = { 259 1282051282, 260 639795266, 261 320 * MEGA, 262 160 * MEGA, 263 80 * MEGA, 264 40 * MEGA, 265 20 * MEGA, 266 10 * MEGA, 267 5 * MEGA, 268 }; 269 270 /* 271 * range is typically +-2G/4G/8G/16G, distributed over the amount of bits. 272 * The scale table can be calculated using 273 * (range / 2^bits) * g = (range / 2^bits) * 9.80665 m/s^2 274 * => KX022A uses 16 bit (HiRes mode - assume the low 8 bits are zeroed 275 * in low-power mode(?) ) 276 * => +/-2G => 4 / 2^16 * 9,80665 * 10^6 (to scale to micro) 277 * => +/-2G - 598.550415 278 * +/-4G - 1197.10083 279 * +/-8G - 2394.20166 280 * +/-16G - 4788.40332 281 */ 282 static const int kx022a_scale_table[][2] = { 283 { 598, 550415 }, 284 { 1197, 100830 }, 285 { 2394, 201660 }, 286 { 4788, 403320 }, 287 }; 288 289 static int kx022a_read_avail(struct iio_dev *indio_dev, 290 struct iio_chan_spec const *chan, 291 const int **vals, int *type, int *length, 292 long mask) 293 { 294 switch (mask) { 295 case IIO_CHAN_INFO_SAMP_FREQ: 296 *vals = (const int *)kx022a_accel_samp_freq_table; 297 *length = ARRAY_SIZE(kx022a_accel_samp_freq_table) * 298 ARRAY_SIZE(kx022a_accel_samp_freq_table[0]); 299 *type = IIO_VAL_INT_PLUS_MICRO; 300 return IIO_AVAIL_LIST; 301 case IIO_CHAN_INFO_SCALE: 302 *vals = (const int *)kx022a_scale_table; 303 *length = ARRAY_SIZE(kx022a_scale_table) * 304 ARRAY_SIZE(kx022a_scale_table[0]); 305 *type = IIO_VAL_INT_PLUS_MICRO; 306 return IIO_AVAIL_LIST; 307 default: 308 return -EINVAL; 309 } 310 } 311 312 #define KX022A_DEFAULT_PERIOD_NS (20 * NSEC_PER_MSEC) 313 314 static void kx022a_reg2freq(unsigned int val, int *val1, int *val2) 315 { 316 *val1 = kx022a_accel_samp_freq_table[val & KX022A_MASK_ODR][0]; 317 *val2 = kx022a_accel_samp_freq_table[val & KX022A_MASK_ODR][1]; 318 } 319 320 static void kx022a_reg2scale(unsigned int val, unsigned int *val1, 321 unsigned int *val2) 322 { 323 val &= KX022A_MASK_GSEL; 324 val >>= KX022A_GSEL_SHIFT; 325 326 *val1 = kx022a_scale_table[val][0]; 327 *val2 = kx022a_scale_table[val][1]; 328 } 329 330 static int kx022a_turn_on_off_unlocked(struct kx022a_data *data, bool on) 331 { 332 int ret; 333 334 if (on) 335 ret = regmap_set_bits(data->regmap, KX022A_REG_CNTL, 336 KX022A_MASK_PC1); 337 else 338 ret = regmap_clear_bits(data->regmap, KX022A_REG_CNTL, 339 KX022A_MASK_PC1); 340 if (ret) 341 dev_err(data->dev, "Turn %s fail %d\n", str_on_off(on), ret); 342 343 return ret; 344 345 } 346 347 static int kx022a_turn_off_lock(struct kx022a_data *data) 348 { 349 int ret; 350 351 mutex_lock(&data->mutex); 352 ret = kx022a_turn_on_off_unlocked(data, false); 353 if (ret) 354 mutex_unlock(&data->mutex); 355 356 return ret; 357 } 358 359 static int kx022a_turn_on_unlock(struct kx022a_data *data) 360 { 361 int ret; 362 363 ret = kx022a_turn_on_off_unlocked(data, true); 364 mutex_unlock(&data->mutex); 365 366 return ret; 367 } 368 369 static int kx022a_write_raw(struct iio_dev *idev, 370 struct iio_chan_spec const *chan, 371 int val, int val2, long mask) 372 { 373 struct kx022a_data *data = iio_priv(idev); 374 int ret, n; 375 376 /* 377 * We should not allow changing scale or frequency when FIFO is running 378 * as it will mess the timestamp/scale for samples existing in the 379 * buffer. If this turns out to be an issue we can later change logic 380 * to internally flush the fifo before reconfiguring so the samples in 381 * fifo keep matching the freq/scale settings. (Such setup could cause 382 * issues if users trust the watermark to be reached within known 383 * time-limit). 384 */ 385 ret = iio_device_claim_direct_mode(idev); 386 if (ret) 387 return ret; 388 389 switch (mask) { 390 case IIO_CHAN_INFO_SAMP_FREQ: 391 n = ARRAY_SIZE(kx022a_accel_samp_freq_table); 392 393 while (n--) 394 if (val == kx022a_accel_samp_freq_table[n][0] && 395 val2 == kx022a_accel_samp_freq_table[n][1]) 396 break; 397 if (n < 0) { 398 ret = -EINVAL; 399 goto unlock_out; 400 } 401 ret = kx022a_turn_off_lock(data); 402 if (ret) 403 break; 404 405 ret = regmap_update_bits(data->regmap, 406 KX022A_REG_ODCNTL, 407 KX022A_MASK_ODR, n); 408 data->odr_ns = kx022a_odrs[n]; 409 kx022a_turn_on_unlock(data); 410 break; 411 case IIO_CHAN_INFO_SCALE: 412 n = ARRAY_SIZE(kx022a_scale_table); 413 414 while (n-- > 0) 415 if (val == kx022a_scale_table[n][0] && 416 val2 == kx022a_scale_table[n][1]) 417 break; 418 if (n < 0) { 419 ret = -EINVAL; 420 goto unlock_out; 421 } 422 423 ret = kx022a_turn_off_lock(data); 424 if (ret) 425 break; 426 427 ret = regmap_update_bits(data->regmap, KX022A_REG_CNTL, 428 KX022A_MASK_GSEL, 429 n << KX022A_GSEL_SHIFT); 430 kx022a_turn_on_unlock(data); 431 break; 432 default: 433 ret = -EINVAL; 434 break; 435 } 436 437 unlock_out: 438 iio_device_release_direct_mode(idev); 439 440 return ret; 441 } 442 443 static int kx022a_fifo_set_wmi(struct kx022a_data *data) 444 { 445 u8 threshold; 446 447 threshold = data->watermark; 448 449 return regmap_update_bits(data->regmap, KX022A_REG_BUF_CNTL1, 450 KX022A_MASK_WM_TH, threshold); 451 } 452 453 static int kx022a_get_axis(struct kx022a_data *data, 454 struct iio_chan_spec const *chan, 455 int *val) 456 { 457 int ret; 458 459 ret = regmap_bulk_read(data->regmap, chan->address, &data->buffer[0], 460 sizeof(__le16)); 461 if (ret) 462 return ret; 463 464 *val = le16_to_cpu(data->buffer[0]); 465 466 return IIO_VAL_INT; 467 } 468 469 static int kx022a_read_raw(struct iio_dev *idev, 470 struct iio_chan_spec const *chan, 471 int *val, int *val2, long mask) 472 { 473 struct kx022a_data *data = iio_priv(idev); 474 unsigned int regval; 475 int ret; 476 477 switch (mask) { 478 case IIO_CHAN_INFO_RAW: 479 ret = iio_device_claim_direct_mode(idev); 480 if (ret) 481 return ret; 482 483 mutex_lock(&data->mutex); 484 ret = kx022a_get_axis(data, chan, val); 485 mutex_unlock(&data->mutex); 486 487 iio_device_release_direct_mode(idev); 488 489 return ret; 490 491 case IIO_CHAN_INFO_SAMP_FREQ: 492 ret = regmap_read(data->regmap, KX022A_REG_ODCNTL, ®val); 493 if (ret) 494 return ret; 495 496 if ((regval & KX022A_MASK_ODR) > 497 ARRAY_SIZE(kx022a_accel_samp_freq_table)) { 498 dev_err(data->dev, "Invalid ODR\n"); 499 return -EINVAL; 500 } 501 502 kx022a_reg2freq(regval, val, val2); 503 504 return IIO_VAL_INT_PLUS_MICRO; 505 506 case IIO_CHAN_INFO_SCALE: 507 ret = regmap_read(data->regmap, KX022A_REG_CNTL, ®val); 508 if (ret < 0) 509 return ret; 510 511 kx022a_reg2scale(regval, val, val2); 512 513 return IIO_VAL_INT_PLUS_MICRO; 514 } 515 516 return -EINVAL; 517 }; 518 519 static int kx022a_validate_trigger(struct iio_dev *idev, 520 struct iio_trigger *trig) 521 { 522 struct kx022a_data *data = iio_priv(idev); 523 524 if (data->trig != trig) 525 return -EINVAL; 526 527 return 0; 528 } 529 530 static int kx022a_set_watermark(struct iio_dev *idev, unsigned int val) 531 { 532 struct kx022a_data *data = iio_priv(idev); 533 534 if (val > KX022A_FIFO_LENGTH) 535 val = KX022A_FIFO_LENGTH; 536 537 mutex_lock(&data->mutex); 538 data->watermark = val; 539 mutex_unlock(&data->mutex); 540 541 return 0; 542 } 543 544 static ssize_t hwfifo_enabled_show(struct device *dev, 545 struct device_attribute *attr, 546 char *buf) 547 { 548 struct iio_dev *idev = dev_to_iio_dev(dev); 549 struct kx022a_data *data = iio_priv(idev); 550 bool state; 551 552 mutex_lock(&data->mutex); 553 state = data->state; 554 mutex_unlock(&data->mutex); 555 556 return sysfs_emit(buf, "%d\n", state); 557 } 558 559 static ssize_t hwfifo_watermark_show(struct device *dev, 560 struct device_attribute *attr, 561 char *buf) 562 { 563 struct iio_dev *idev = dev_to_iio_dev(dev); 564 struct kx022a_data *data = iio_priv(idev); 565 int wm; 566 567 mutex_lock(&data->mutex); 568 wm = data->watermark; 569 mutex_unlock(&data->mutex); 570 571 return sysfs_emit(buf, "%d\n", wm); 572 } 573 574 static IIO_DEVICE_ATTR_RO(hwfifo_enabled, 0); 575 static IIO_DEVICE_ATTR_RO(hwfifo_watermark, 0); 576 577 static const struct iio_dev_attr *kx022a_fifo_attributes[] = { 578 &iio_dev_attr_hwfifo_watermark, 579 &iio_dev_attr_hwfifo_enabled, 580 NULL 581 }; 582 583 static int kx022a_drop_fifo_contents(struct kx022a_data *data) 584 { 585 /* 586 * We must clear the old time-stamp to avoid computing the timestamps 587 * based on samples acquired when buffer was last enabled. 588 * 589 * We don't need to protect the timestamp as long as we are only 590 * called from fifo-disable where we can guarantee the sensor is not 591 * triggering interrupts and where the mutex is locked to prevent the 592 * user-space access. 593 */ 594 data->timestamp = 0; 595 596 return regmap_write(data->regmap, KX022A_REG_BUF_CLEAR, 0x0); 597 } 598 599 static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples, 600 bool irq) 601 { 602 struct kx022a_data *data = iio_priv(idev); 603 struct device *dev = regmap_get_device(data->regmap); 604 __le16 buffer[KX022A_FIFO_LENGTH * 3]; 605 uint64_t sample_period; 606 int count, fifo_bytes; 607 bool renable = false; 608 int64_t tstamp; 609 int ret, i; 610 611 ret = regmap_read(data->regmap, KX022A_REG_BUF_STATUS_1, &fifo_bytes); 612 if (ret) { 613 dev_err(dev, "Error reading buffer status\n"); 614 return ret; 615 } 616 617 /* Let's not overflow if we for some reason get bogus value from i2c */ 618 if (fifo_bytes == KX022A_FIFO_FULL_VALUE) 619 fifo_bytes = KX022A_FIFO_MAX_BYTES; 620 621 if (fifo_bytes % KX022A_FIFO_SAMPLES_SIZE_BYTES) 622 dev_warn(data->dev, "Bad FIFO alignment. Data may be corrupt\n"); 623 624 count = fifo_bytes / KX022A_FIFO_SAMPLES_SIZE_BYTES; 625 if (!count) 626 return 0; 627 628 /* 629 * If we are being called from IRQ handler we know the stored timestamp 630 * is fairly accurate for the last stored sample. Otherwise, if we are 631 * called as a result of a read operation from userspace and hence 632 * before the watermark interrupt was triggered, take a timestamp 633 * now. We can fall anywhere in between two samples so the error in this 634 * case is at most one sample period. 635 */ 636 if (!irq) { 637 /* 638 * We need to have the IRQ disabled or we risk of messing-up 639 * the timestamps. If we are ran from IRQ, then the 640 * IRQF_ONESHOT has us covered - but if we are ran by the 641 * user-space read we need to disable the IRQ to be on a safe 642 * side. We do this usng synchronous disable so that if the 643 * IRQ thread is being ran on other CPU we wait for it to be 644 * finished. 645 */ 646 disable_irq(data->irq); 647 renable = true; 648 649 data->old_timestamp = data->timestamp; 650 data->timestamp = iio_get_time_ns(idev); 651 } 652 653 /* 654 * Approximate timestamps for each of the sample based on the sampling 655 * frequency, timestamp for last sample and number of samples. 656 * 657 * We'd better not use the current bandwidth settings to compute the 658 * sample period. The real sample rate varies with the device and 659 * small variation adds when we store a large number of samples. 660 * 661 * To avoid this issue we compute the actual sample period ourselves 662 * based on the timestamp delta between the last two flush operations. 663 */ 664 if (data->old_timestamp) { 665 sample_period = data->timestamp - data->old_timestamp; 666 do_div(sample_period, count); 667 } else { 668 sample_period = data->odr_ns; 669 } 670 tstamp = data->timestamp - (count - 1) * sample_period; 671 672 if (samples && count > samples) { 673 /* 674 * Here we leave some old samples to the buffer. We need to 675 * adjust the timestamp to match the first sample in the buffer 676 * or we will miscalculate the sample_period at next round. 677 */ 678 data->timestamp -= (count - samples) * sample_period; 679 count = samples; 680 } 681 682 fifo_bytes = count * KX022A_FIFO_SAMPLES_SIZE_BYTES; 683 ret = regmap_noinc_read(data->regmap, KX022A_REG_BUF_READ, 684 &buffer[0], fifo_bytes); 685 if (ret) 686 goto renable_out; 687 688 for (i = 0; i < count; i++) { 689 __le16 *sam = &buffer[i * 3]; 690 __le16 *chs; 691 int bit; 692 693 chs = &data->scan.channels[0]; 694 for_each_set_bit(bit, idev->active_scan_mask, AXIS_MAX) 695 chs[bit] = sam[bit]; 696 697 iio_push_to_buffers_with_timestamp(idev, &data->scan, tstamp); 698 699 tstamp += sample_period; 700 } 701 702 ret = count; 703 704 renable_out: 705 if (renable) 706 enable_irq(data->irq); 707 708 return ret; 709 } 710 711 static int kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples) 712 { 713 struct kx022a_data *data = iio_priv(idev); 714 int ret; 715 716 mutex_lock(&data->mutex); 717 ret = __kx022a_fifo_flush(idev, samples, false); 718 mutex_unlock(&data->mutex); 719 720 return ret; 721 } 722 723 static const struct iio_info kx022a_info = { 724 .read_raw = &kx022a_read_raw, 725 .write_raw = &kx022a_write_raw, 726 .read_avail = &kx022a_read_avail, 727 728 .validate_trigger = kx022a_validate_trigger, 729 .hwfifo_set_watermark = kx022a_set_watermark, 730 .hwfifo_flush_to_buffer = kx022a_fifo_flush, 731 }; 732 733 static int kx022a_set_drdy_irq(struct kx022a_data *data, bool en) 734 { 735 if (en) 736 return regmap_set_bits(data->regmap, KX022A_REG_CNTL, 737 KX022A_MASK_DRDY); 738 739 return regmap_clear_bits(data->regmap, KX022A_REG_CNTL, 740 KX022A_MASK_DRDY); 741 } 742 743 static int kx022a_prepare_irq_pin(struct kx022a_data *data) 744 { 745 /* Enable IRQ1 pin. Set polarity to active low */ 746 int mask = KX022A_MASK_IEN | KX022A_MASK_IPOL | 747 KX022A_MASK_ITYP; 748 int val = KX022A_MASK_IEN | KX022A_IPOL_LOW | 749 KX022A_ITYP_LEVEL; 750 int ret; 751 752 ret = regmap_update_bits(data->regmap, data->inc_reg, mask, val); 753 if (ret) 754 return ret; 755 756 /* We enable WMI to IRQ pin only at buffer_enable */ 757 mask = KX022A_MASK_INS2_DRDY; 758 759 return regmap_set_bits(data->regmap, data->ien_reg, mask); 760 } 761 762 static int kx022a_fifo_disable(struct kx022a_data *data) 763 { 764 int ret = 0; 765 766 ret = kx022a_turn_off_lock(data); 767 if (ret) 768 return ret; 769 770 ret = regmap_clear_bits(data->regmap, data->ien_reg, KX022A_MASK_WMI); 771 if (ret) 772 goto unlock_out; 773 774 ret = regmap_clear_bits(data->regmap, KX022A_REG_BUF_CNTL2, 775 KX022A_MASK_BUF_EN); 776 if (ret) 777 goto unlock_out; 778 779 data->state &= ~KX022A_STATE_FIFO; 780 781 kx022a_drop_fifo_contents(data); 782 783 return kx022a_turn_on_unlock(data); 784 785 unlock_out: 786 mutex_unlock(&data->mutex); 787 788 return ret; 789 } 790 791 static int kx022a_buffer_predisable(struct iio_dev *idev) 792 { 793 struct kx022a_data *data = iio_priv(idev); 794 795 if (iio_device_get_current_mode(idev) == INDIO_BUFFER_TRIGGERED) 796 return 0; 797 798 return kx022a_fifo_disable(data); 799 } 800 801 static int kx022a_fifo_enable(struct kx022a_data *data) 802 { 803 int ret; 804 805 ret = kx022a_turn_off_lock(data); 806 if (ret) 807 return ret; 808 809 /* Update watermark to HW */ 810 ret = kx022a_fifo_set_wmi(data); 811 if (ret) 812 goto unlock_out; 813 814 /* Enable buffer */ 815 ret = regmap_set_bits(data->regmap, KX022A_REG_BUF_CNTL2, 816 KX022A_MASK_BUF_EN); 817 if (ret) 818 goto unlock_out; 819 820 data->state |= KX022A_STATE_FIFO; 821 ret = regmap_set_bits(data->regmap, data->ien_reg, 822 KX022A_MASK_WMI); 823 if (ret) 824 goto unlock_out; 825 826 return kx022a_turn_on_unlock(data); 827 828 unlock_out: 829 mutex_unlock(&data->mutex); 830 831 return ret; 832 } 833 834 static int kx022a_buffer_postenable(struct iio_dev *idev) 835 { 836 struct kx022a_data *data = iio_priv(idev); 837 838 /* 839 * If we use data-ready trigger, then the IRQ masks should be handled by 840 * trigger enable and the hardware buffer is not used but we just update 841 * results to the IIO fifo when data-ready triggers. 842 */ 843 if (iio_device_get_current_mode(idev) == INDIO_BUFFER_TRIGGERED) 844 return 0; 845 846 return kx022a_fifo_enable(data); 847 } 848 849 static const struct iio_buffer_setup_ops kx022a_buffer_ops = { 850 .postenable = kx022a_buffer_postenable, 851 .predisable = kx022a_buffer_predisable, 852 }; 853 854 static irqreturn_t kx022a_trigger_handler(int irq, void *p) 855 { 856 struct iio_poll_func *pf = p; 857 struct iio_dev *idev = pf->indio_dev; 858 struct kx022a_data *data = iio_priv(idev); 859 int ret; 860 861 ret = regmap_bulk_read(data->regmap, KX022A_REG_XOUT_L, data->buffer, 862 KX022A_FIFO_SAMPLES_SIZE_BYTES); 863 if (ret < 0) 864 goto err_read; 865 866 iio_push_to_buffers_with_timestamp(idev, data->buffer, data->timestamp); 867 err_read: 868 iio_trigger_notify_done(idev->trig); 869 870 return IRQ_HANDLED; 871 } 872 873 /* Get timestamps and wake the thread if we need to read data */ 874 static irqreturn_t kx022a_irq_handler(int irq, void *private) 875 { 876 struct iio_dev *idev = private; 877 struct kx022a_data *data = iio_priv(idev); 878 879 data->old_timestamp = data->timestamp; 880 data->timestamp = iio_get_time_ns(idev); 881 882 if (data->state & KX022A_STATE_FIFO || data->trigger_enabled) 883 return IRQ_WAKE_THREAD; 884 885 return IRQ_NONE; 886 } 887 888 /* 889 * WMI and data-ready IRQs are acked when results are read. If we add 890 * TILT/WAKE or other IRQs - then we may need to implement the acking 891 * (which is racy). 892 */ 893 static irqreturn_t kx022a_irq_thread_handler(int irq, void *private) 894 { 895 struct iio_dev *idev = private; 896 struct kx022a_data *data = iio_priv(idev); 897 irqreturn_t ret = IRQ_NONE; 898 899 mutex_lock(&data->mutex); 900 901 if (data->trigger_enabled) { 902 iio_trigger_poll_nested(data->trig); 903 ret = IRQ_HANDLED; 904 } 905 906 if (data->state & KX022A_STATE_FIFO) { 907 int ok; 908 909 ok = __kx022a_fifo_flush(idev, KX022A_FIFO_LENGTH, true); 910 if (ok > 0) 911 ret = IRQ_HANDLED; 912 } 913 914 mutex_unlock(&data->mutex); 915 916 return ret; 917 } 918 919 static int kx022a_trigger_set_state(struct iio_trigger *trig, 920 bool state) 921 { 922 struct kx022a_data *data = iio_trigger_get_drvdata(trig); 923 int ret = 0; 924 925 mutex_lock(&data->mutex); 926 927 if (data->trigger_enabled == state) 928 goto unlock_out; 929 930 if (data->state & KX022A_STATE_FIFO) { 931 dev_warn(data->dev, "Can't set trigger when FIFO enabled\n"); 932 ret = -EBUSY; 933 goto unlock_out; 934 } 935 936 ret = kx022a_turn_on_off_unlocked(data, false); 937 if (ret) 938 goto unlock_out; 939 940 data->trigger_enabled = state; 941 ret = kx022a_set_drdy_irq(data, state); 942 if (ret) 943 goto unlock_out; 944 945 ret = kx022a_turn_on_off_unlocked(data, true); 946 947 unlock_out: 948 mutex_unlock(&data->mutex); 949 950 return ret; 951 } 952 953 static const struct iio_trigger_ops kx022a_trigger_ops = { 954 .set_trigger_state = kx022a_trigger_set_state, 955 }; 956 957 static int kx022a_chip_init(struct kx022a_data *data) 958 { 959 int ret, val; 960 961 /* Reset the senor */ 962 ret = regmap_write(data->regmap, KX022A_REG_CNTL2, KX022A_MASK_SRST); 963 if (ret) 964 return ret; 965 966 /* 967 * I've seen I2C read failures if we poll too fast after the sensor 968 * reset. Slight delay gives I2C block the time to recover. 969 */ 970 msleep(1); 971 972 ret = regmap_read_poll_timeout(data->regmap, KX022A_REG_CNTL2, val, 973 !(val & KX022A_MASK_SRST), 974 KX022A_SOFT_RESET_WAIT_TIME_US, 975 KX022A_SOFT_RESET_TOTAL_WAIT_TIME_US); 976 if (ret) { 977 dev_err(data->dev, "Sensor reset %s\n", 978 val & KX022A_MASK_SRST ? "timeout" : "fail#"); 979 return ret; 980 } 981 982 ret = regmap_reinit_cache(data->regmap, &kx022a_regmap); 983 if (ret) { 984 dev_err(data->dev, "Failed to reinit reg cache\n"); 985 return ret; 986 } 987 988 /* set data res 16bit */ 989 ret = regmap_set_bits(data->regmap, KX022A_REG_BUF_CNTL2, 990 KX022A_MASK_BRES16); 991 if (ret) { 992 dev_err(data->dev, "Failed to set data resolution\n"); 993 return ret; 994 } 995 996 return kx022a_prepare_irq_pin(data); 997 } 998 999 int kx022a_probe_internal(struct device *dev) 1000 { 1001 static const char * const regulator_names[] = {"io-vdd", "vdd"}; 1002 struct iio_trigger *indio_trig; 1003 struct fwnode_handle *fwnode; 1004 struct kx022a_data *data; 1005 struct regmap *regmap; 1006 unsigned int chip_id; 1007 struct iio_dev *idev; 1008 int ret, irq; 1009 char *name; 1010 1011 regmap = dev_get_regmap(dev, NULL); 1012 if (!regmap) { 1013 dev_err(dev, "no regmap\n"); 1014 return -EINVAL; 1015 } 1016 1017 fwnode = dev_fwnode(dev); 1018 if (!fwnode) 1019 return -ENODEV; 1020 1021 idev = devm_iio_device_alloc(dev, sizeof(*data)); 1022 if (!idev) 1023 return -ENOMEM; 1024 1025 data = iio_priv(idev); 1026 1027 /* 1028 * VDD is the analog and digital domain voltage supply and 1029 * IO_VDD is the digital I/O voltage supply. 1030 */ 1031 ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulator_names), 1032 regulator_names); 1033 if (ret && ret != -ENODEV) 1034 return dev_err_probe(dev, ret, "failed to enable regulator\n"); 1035 1036 ret = regmap_read(regmap, KX022A_REG_WHO, &chip_id); 1037 if (ret) 1038 return dev_err_probe(dev, ret, "Failed to access sensor\n"); 1039 1040 if (chip_id != KX022A_ID) { 1041 dev_err(dev, "unsupported device 0x%x\n", chip_id); 1042 return -EINVAL; 1043 } 1044 1045 irq = fwnode_irq_get_byname(fwnode, "INT1"); 1046 if (irq > 0) { 1047 data->inc_reg = KX022A_REG_INC1; 1048 data->ien_reg = KX022A_REG_INC4; 1049 } else { 1050 irq = fwnode_irq_get_byname(fwnode, "INT2"); 1051 if (irq < 0) 1052 return dev_err_probe(dev, irq, "No suitable IRQ\n"); 1053 1054 data->inc_reg = KX022A_REG_INC5; 1055 data->ien_reg = KX022A_REG_INC6; 1056 } 1057 1058 data->regmap = regmap; 1059 data->dev = dev; 1060 data->irq = irq; 1061 data->odr_ns = KX022A_DEFAULT_PERIOD_NS; 1062 mutex_init(&data->mutex); 1063 1064 idev->channels = kx022a_channels; 1065 idev->num_channels = ARRAY_SIZE(kx022a_channels); 1066 idev->name = "kx022-accel"; 1067 idev->info = &kx022a_info; 1068 idev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; 1069 idev->available_scan_masks = kx022a_scan_masks; 1070 1071 /* Read the mounting matrix, if present */ 1072 ret = iio_read_mount_matrix(dev, &data->orientation); 1073 if (ret) 1074 return ret; 1075 1076 /* The sensor must be turned off for configuration */ 1077 ret = kx022a_turn_off_lock(data); 1078 if (ret) 1079 return ret; 1080 1081 ret = kx022a_chip_init(data); 1082 if (ret) { 1083 mutex_unlock(&data->mutex); 1084 return ret; 1085 } 1086 1087 ret = kx022a_turn_on_unlock(data); 1088 if (ret) 1089 return ret; 1090 1091 ret = devm_iio_triggered_buffer_setup_ext(dev, idev, 1092 &iio_pollfunc_store_time, 1093 kx022a_trigger_handler, 1094 IIO_BUFFER_DIRECTION_IN, 1095 &kx022a_buffer_ops, 1096 kx022a_fifo_attributes); 1097 1098 if (ret) 1099 return dev_err_probe(data->dev, ret, 1100 "iio_triggered_buffer_setup_ext FAIL\n"); 1101 indio_trig = devm_iio_trigger_alloc(dev, "%sdata-rdy-dev%d", idev->name, 1102 iio_device_id(idev)); 1103 if (!indio_trig) 1104 return -ENOMEM; 1105 1106 data->trig = indio_trig; 1107 1108 indio_trig->ops = &kx022a_trigger_ops; 1109 iio_trigger_set_drvdata(indio_trig, data); 1110 1111 /* 1112 * No need to check for NULL. request_threaded_irq() defaults to 1113 * dev_name() should the alloc fail. 1114 */ 1115 name = devm_kasprintf(data->dev, GFP_KERNEL, "%s-kx022a", 1116 dev_name(data->dev)); 1117 1118 ret = devm_request_threaded_irq(data->dev, irq, kx022a_irq_handler, 1119 &kx022a_irq_thread_handler, 1120 IRQF_ONESHOT, name, idev); 1121 if (ret) 1122 return dev_err_probe(data->dev, ret, "Could not request IRQ\n"); 1123 1124 1125 ret = devm_iio_trigger_register(dev, indio_trig); 1126 if (ret) 1127 return dev_err_probe(data->dev, ret, 1128 "Trigger registration failed\n"); 1129 1130 ret = devm_iio_device_register(data->dev, idev); 1131 if (ret < 0) 1132 return dev_err_probe(dev, ret, 1133 "Unable to register iio device\n"); 1134 1135 return ret; 1136 } 1137 EXPORT_SYMBOL_NS_GPL(kx022a_probe_internal, IIO_KX022A); 1138 1139 MODULE_DESCRIPTION("ROHM/Kionix KX022A accelerometer driver"); 1140 MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); 1141 MODULE_LICENSE("GPL"); 1142