xref: /openbmc/linux/drivers/iio/accel/da311.c (revision e3d786a3)
1 /**
2  * IIO driver for the MiraMEMS DA311 3-axis accelerometer
3  *
4  * Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
5  * Copyright (c) 2011-2013 MiraMEMS Sensing Technology Co., Ltd.
6  *
7  * This program is free software; you can redistribute it and/or modify it
8  * under the terms and conditions of the GNU General Public License,
9  * version 2, as published by the Free Software Foundation.
10  */
11 
12 #include <linux/module.h>
13 #include <linux/i2c.h>
14 #include <linux/iio/iio.h>
15 #include <linux/iio/sysfs.h>
16 #include <linux/byteorder/generic.h>
17 
18 #define DA311_CHIP_ID			0x13
19 
20 /*
21  * Note register addressed go from 0 - 0x3f and then wrap.
22  * For some reason there are 2 banks with 0 - 0x3f addresses,
23  * rather then a single 0-0x7f bank.
24  */
25 
26 /* Bank 0 regs */
27 #define DA311_REG_BANK			0x0000
28 #define DA311_REG_LDO_REG		0x0006
29 #define DA311_REG_CHIP_ID		0x000f
30 #define DA311_REG_TEMP_CFG_REG		0x001f
31 #define DA311_REG_CTRL_REG1		0x0020
32 #define DA311_REG_CTRL_REG3		0x0022
33 #define DA311_REG_CTRL_REG4		0x0023
34 #define DA311_REG_CTRL_REG5		0x0024
35 #define DA311_REG_CTRL_REG6		0x0025
36 #define DA311_REG_STATUS_REG		0x0027
37 #define DA311_REG_OUT_X_L		0x0028
38 #define DA311_REG_OUT_X_H		0x0029
39 #define DA311_REG_OUT_Y_L		0x002a
40 #define DA311_REG_OUT_Y_H		0x002b
41 #define DA311_REG_OUT_Z_L		0x002c
42 #define DA311_REG_OUT_Z_H		0x002d
43 #define DA311_REG_INT1_CFG		0x0030
44 #define DA311_REG_INT1_SRC		0x0031
45 #define DA311_REG_INT1_THS		0x0032
46 #define DA311_REG_INT1_DURATION		0x0033
47 #define DA311_REG_INT2_CFG		0x0034
48 #define DA311_REG_INT2_SRC		0x0035
49 #define DA311_REG_INT2_THS		0x0036
50 #define DA311_REG_INT2_DURATION		0x0037
51 #define DA311_REG_CLICK_CFG		0x0038
52 #define DA311_REG_CLICK_SRC		0x0039
53 #define DA311_REG_CLICK_THS		0x003a
54 #define DA311_REG_TIME_LIMIT		0x003b
55 #define DA311_REG_TIME_LATENCY		0x003c
56 #define DA311_REG_TIME_WINDOW		0x003d
57 
58 /* Bank 1 regs */
59 #define DA311_REG_SOFT_RESET		0x0105
60 #define DA311_REG_OTP_XOFF_L		0x0110
61 #define DA311_REG_OTP_XOFF_H		0x0111
62 #define DA311_REG_OTP_YOFF_L		0x0112
63 #define DA311_REG_OTP_YOFF_H		0x0113
64 #define DA311_REG_OTP_ZOFF_L		0x0114
65 #define DA311_REG_OTP_ZOFF_H		0x0115
66 #define DA311_REG_OTP_XSO		0x0116
67 #define DA311_REG_OTP_YSO		0x0117
68 #define DA311_REG_OTP_ZSO		0x0118
69 #define DA311_REG_OTP_TRIM_OSC		0x011b
70 #define DA311_REG_LPF_ABSOLUTE		0x011c
71 #define DA311_REG_TEMP_OFF1		0x0127
72 #define DA311_REG_TEMP_OFF2		0x0128
73 #define DA311_REG_TEMP_OFF3		0x0129
74 #define DA311_REG_OTP_TRIM_THERM_H	0x011a
75 
76 /*
77  * a value of + or -1024 corresponds to + or - 1G
78  * scale = 9.81 / 1024 = 0.009580078
79  */
80 
81 static const int da311_nscale = 9580078;
82 
83 #define DA311_CHANNEL(reg, axis) {	\
84 	.type = IIO_ACCEL,	\
85 	.address = reg,	\
86 	.modified = 1,	\
87 	.channel2 = IIO_MOD_##axis,	\
88 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
89 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
90 }
91 
92 static const struct iio_chan_spec da311_channels[] = {
93 	/* | 0x80 comes from the android driver */
94 	DA311_CHANNEL(DA311_REG_OUT_X_L | 0x80, X),
95 	DA311_CHANNEL(DA311_REG_OUT_Y_L | 0x80, Y),
96 	DA311_CHANNEL(DA311_REG_OUT_Z_L | 0x80, Z),
97 };
98 
99 struct da311_data {
100 	struct i2c_client *client;
101 };
102 
103 static int da311_register_mask_write(struct i2c_client *client, u16 addr,
104 				     u8 mask, u8 data)
105 {
106 	int ret;
107 	u8 tmp_data = 0;
108 
109 	if (addr & 0xff00) {
110 		/* Select bank 1 */
111 		ret = i2c_smbus_write_byte_data(client, DA311_REG_BANK, 0x01);
112 		if (ret < 0)
113 			return ret;
114 	}
115 
116 	if (mask != 0xff) {
117 		ret = i2c_smbus_read_byte_data(client, addr);
118 		if (ret < 0)
119 			return ret;
120 		tmp_data = ret;
121 	}
122 
123 	tmp_data &= ~mask;
124 	tmp_data |= data & mask;
125 	ret = i2c_smbus_write_byte_data(client, addr & 0xff, tmp_data);
126 	if (ret < 0)
127 		return ret;
128 
129 	if (addr & 0xff00) {
130 		/* Back to bank 0 */
131 		ret = i2c_smbus_write_byte_data(client, DA311_REG_BANK, 0x00);
132 		if (ret < 0)
133 			return ret;
134 	}
135 
136 	return 0;
137 }
138 
139 /* Init sequence taken from the android driver */
140 static int da311_reset(struct i2c_client *client)
141 {
142 	static const struct {
143 		u16 addr;
144 		u8 mask;
145 		u8 data;
146 	} init_data[] = {
147 		{ DA311_REG_TEMP_CFG_REG,       0xff,   0x08 },
148 		{ DA311_REG_CTRL_REG5,          0xff,   0x80 },
149 		{ DA311_REG_CTRL_REG4,          0x30,   0x00 },
150 		{ DA311_REG_CTRL_REG1,          0xff,   0x6f },
151 		{ DA311_REG_TEMP_CFG_REG,       0xff,   0x88 },
152 		{ DA311_REG_LDO_REG,            0xff,   0x02 },
153 		{ DA311_REG_OTP_TRIM_OSC,       0xff,   0x27 },
154 		{ DA311_REG_LPF_ABSOLUTE,       0xff,   0x30 },
155 		{ DA311_REG_TEMP_OFF1,          0xff,   0x3f },
156 		{ DA311_REG_TEMP_OFF2,          0xff,   0xff },
157 		{ DA311_REG_TEMP_OFF3,          0xff,   0x0f },
158 	};
159 	int i, ret;
160 
161 	/* Reset */
162 	ret = da311_register_mask_write(client, DA311_REG_SOFT_RESET,
163 					0xff, 0xaa);
164 	if (ret < 0)
165 		return ret;
166 
167 	for (i = 0; i < ARRAY_SIZE(init_data); i++) {
168 		ret = da311_register_mask_write(client,
169 						init_data[i].addr,
170 						init_data[i].mask,
171 						init_data[i].data);
172 		if (ret < 0)
173 			return ret;
174 	}
175 
176 	return 0;
177 }
178 
179 static int da311_enable(struct i2c_client *client, bool enable)
180 {
181 	u8 data = enable ? 0x00 : 0x20;
182 
183 	return da311_register_mask_write(client, DA311_REG_TEMP_CFG_REG,
184 					 0x20, data);
185 }
186 
187 static int da311_read_raw(struct iio_dev *indio_dev,
188 				struct iio_chan_spec const *chan,
189 				int *val, int *val2, long mask)
190 {
191 	struct da311_data *data = iio_priv(indio_dev);
192 	int ret;
193 
194 	switch (mask) {
195 	case IIO_CHAN_INFO_RAW:
196 		ret = i2c_smbus_read_word_data(data->client, chan->address);
197 		if (ret < 0)
198 			return ret;
199 		/*
200 		 * Values are 12 bits, stored as 16 bits with the 4
201 		 * least significant bits always 0.
202 		 */
203 		*val = (short)ret >> 4;
204 		return IIO_VAL_INT;
205 	case IIO_CHAN_INFO_SCALE:
206 		*val = 0;
207 		*val2 = da311_nscale;
208 		return IIO_VAL_INT_PLUS_NANO;
209 	default:
210 		return -EINVAL;
211 	}
212 }
213 
214 static const struct iio_info da311_info = {
215 	.read_raw	= da311_read_raw,
216 };
217 
218 static int da311_probe(struct i2c_client *client,
219 			const struct i2c_device_id *id)
220 {
221 	int ret;
222 	struct iio_dev *indio_dev;
223 	struct da311_data *data;
224 
225 	ret = i2c_smbus_read_byte_data(client, DA311_REG_CHIP_ID);
226 	if (ret != DA311_CHIP_ID)
227 		return (ret < 0) ? ret : -ENODEV;
228 
229 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
230 	if (!indio_dev)
231 		return -ENOMEM;
232 
233 	data = iio_priv(indio_dev);
234 	data->client = client;
235 	i2c_set_clientdata(client, indio_dev);
236 
237 	indio_dev->dev.parent = &client->dev;
238 	indio_dev->info = &da311_info;
239 	indio_dev->name = "da311";
240 	indio_dev->modes = INDIO_DIRECT_MODE;
241 	indio_dev->channels = da311_channels;
242 	indio_dev->num_channels = ARRAY_SIZE(da311_channels);
243 
244 	ret = da311_reset(client);
245 	if (ret < 0)
246 		return ret;
247 
248 	ret = da311_enable(client, true);
249 	if (ret < 0)
250 		return ret;
251 
252 	ret = iio_device_register(indio_dev);
253 	if (ret < 0) {
254 		dev_err(&client->dev, "device_register failed\n");
255 		da311_enable(client, false);
256 	}
257 
258 	return ret;
259 }
260 
261 static int da311_remove(struct i2c_client *client)
262 {
263 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
264 
265 	iio_device_unregister(indio_dev);
266 
267 	return da311_enable(client, false);
268 }
269 
270 #ifdef CONFIG_PM_SLEEP
271 static int da311_suspend(struct device *dev)
272 {
273 	return da311_enable(to_i2c_client(dev), false);
274 }
275 
276 static int da311_resume(struct device *dev)
277 {
278 	return da311_enable(to_i2c_client(dev), true);
279 }
280 #endif
281 
282 static SIMPLE_DEV_PM_OPS(da311_pm_ops, da311_suspend, da311_resume);
283 
284 static const struct i2c_device_id da311_i2c_id[] = {
285 	{"da311", 0},
286 	{}
287 };
288 MODULE_DEVICE_TABLE(i2c, da311_i2c_id);
289 
290 static struct i2c_driver da311_driver = {
291 	.driver = {
292 		.name = "da311",
293 		.pm = &da311_pm_ops,
294 	},
295 	.probe		= da311_probe,
296 	.remove		= da311_remove,
297 	.id_table	= da311_i2c_id,
298 };
299 
300 module_i2c_driver(da311_driver);
301 
302 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
303 MODULE_DESCRIPTION("MiraMEMS DA311 3-Axis Accelerometer driver");
304 MODULE_LICENSE("GPL v2");
305