xref: /openbmc/linux/drivers/iio/accel/bma400.h (revision dc6a81c3)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Register constants and other forward declarations needed by the bma400
4  * sources.
5  *
6  * Copyright 2019 Dan Robertson <dan@dlrobertson.com>
7  */
8 
9 #ifndef _BMA400_H_
10 #define _BMA400_H_
11 
12 #include <linux/bits.h>
13 #include <linux/regmap.h>
14 
15 /*
16  * Read-Only Registers
17  */
18 
19 /* Status and ID registers */
20 #define BMA400_CHIP_ID_REG          0x00
21 #define BMA400_ERR_REG              0x02
22 #define BMA400_STATUS_REG           0x03
23 
24 /* Acceleration registers */
25 #define BMA400_X_AXIS_LSB_REG       0x04
26 #define BMA400_X_AXIS_MSB_REG       0x05
27 #define BMA400_Y_AXIS_LSB_REG       0x06
28 #define BMA400_Y_AXIS_MSB_REG       0x07
29 #define BMA400_Z_AXIS_LSB_REG       0x08
30 #define BMA400_Z_AXIS_MSB_REG       0x09
31 
32 /* Sensor time registers */
33 #define BMA400_SENSOR_TIME0         0x0a
34 #define BMA400_SENSOR_TIME1         0x0b
35 #define BMA400_SENSOR_TIME2         0x0c
36 
37 /* Event and interrupt registers */
38 #define BMA400_EVENT_REG            0x0d
39 #define BMA400_INT_STAT0_REG        0x0e
40 #define BMA400_INT_STAT1_REG        0x0f
41 #define BMA400_INT_STAT2_REG        0x10
42 
43 /* Temperature register */
44 #define BMA400_TEMP_DATA_REG        0x11
45 
46 /* FIFO length and data registers */
47 #define BMA400_FIFO_LENGTH0_REG     0x12
48 #define BMA400_FIFO_LENGTH1_REG     0x13
49 #define BMA400_FIFO_DATA_REG        0x14
50 
51 /* Step count registers */
52 #define BMA400_STEP_CNT0_REG        0x15
53 #define BMA400_STEP_CNT1_REG        0x16
54 #define BMA400_STEP_CNT3_REG        0x17
55 #define BMA400_STEP_STAT_REG        0x18
56 
57 /*
58  * Read-write configuration registers
59  */
60 #define BMA400_ACC_CONFIG0_REG      0x19
61 #define BMA400_ACC_CONFIG1_REG      0x1a
62 #define BMA400_ACC_CONFIG2_REG      0x1b
63 #define BMA400_CMD_REG              0x7e
64 
65 /* Chip ID of BMA 400 devices found in the chip ID register. */
66 #define BMA400_ID_REG_VAL           0x90
67 
68 #define BMA400_LP_OSR_SHIFT         5
69 #define BMA400_NP_OSR_SHIFT         4
70 #define BMA400_SCALE_SHIFT          6
71 
72 #define BMA400_TWO_BITS_MASK        GENMASK(1, 0)
73 #define BMA400_LP_OSR_MASK          GENMASK(6, 5)
74 #define BMA400_NP_OSR_MASK          GENMASK(5, 4)
75 #define BMA400_ACC_ODR_MASK         GENMASK(3, 0)
76 #define BMA400_ACC_SCALE_MASK       GENMASK(7, 6)
77 
78 #define BMA400_ACC_ODR_MIN_RAW      0x05
79 #define BMA400_ACC_ODR_LP_RAW       0x06
80 #define BMA400_ACC_ODR_MAX_RAW      0x0b
81 
82 #define BMA400_ACC_ODR_MAX_HZ       800
83 #define BMA400_ACC_ODR_MIN_WHOLE_HZ 25
84 #define BMA400_ACC_ODR_MIN_HZ       12
85 
86 #define BMA400_SCALE_MIN            38357
87 #define BMA400_SCALE_MAX            306864
88 
89 #define BMA400_NUM_REGULATORS       2
90 #define BMA400_VDD_REGULATOR        0
91 #define BMA400_VDDIO_REGULATOR      1
92 
93 extern const struct regmap_config bma400_regmap_config;
94 
95 int bma400_probe(struct device *dev, struct regmap *regmap, const char *name);
96 
97 int bma400_remove(struct device *dev);
98 
99 #endif
100