xref: /openbmc/linux/drivers/iio/accel/Kconfig (revision fcc8487d) 
1#
2# Accelerometer drivers
3#
4# When adding new entries keep the list in alphabetical order
5
6menu "Accelerometers"
7
8config ADXL345
9	tristate
10
11config ADXL345_I2C
12	tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer I2C Driver"
13	depends on INPUT_ADXL34X=n
14	depends on I2C
15	select ADXL345
16	select REGMAP_I2C
17	help
18	  Say Y here if you want to build support for the Analog Devices
19	  ADXL345 3-axis digital accelerometer.
20
21	  To compile this driver as a module, choose M here: the module
22	  will be called adxl345_i2c and you will also get adxl345_core
23	  for the core module.
24
25config ADXL345_SPI
26	tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer SPI Driver"
27	depends on INPUT_ADXL34X=n
28	depends on SPI
29	select ADXL345
30	select REGMAP_SPI
31	help
32	  Say Y here if you want to build support for the Analog Devices
33	  ADXL345 3-axis digital accelerometer.
34
35	  To compile this driver as a module, choose M here: the module
36	  will be called adxl345_spi and you will also get adxl345_core
37	  for the core module.
38
39config BMA180
40	tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
41	depends on I2C
42	select IIO_BUFFER
43	select IIO_TRIGGERED_BUFFER
44	help
45	  Say Y here if you want to build a driver for the Bosch BMA180 or
46	  BMA250 triaxial acceleration sensor.
47
48	  To compile this driver as a module, choose M here: the
49	  module will be called bma180.
50
51config BMA220
52    tristate "Bosch BMA220 3-Axis Accelerometer Driver"
53	depends on SPI
54	select IIO_BUFFER
55	select IIO_TRIGGERED_BUFFER
56    help
57      Say yes here to add support for the Bosch BMA220 triaxial
58      acceleration sensor.
59
60      To compile this driver as a module, choose M here: the
61      module will be called bma220_spi.
62
63config BMC150_ACCEL
64	tristate "Bosch BMC150 Accelerometer Driver"
65	select IIO_BUFFER
66	select IIO_TRIGGERED_BUFFER
67	select REGMAP
68	select BMC150_ACCEL_I2C if I2C
69	select BMC150_ACCEL_SPI if SPI
70	help
71	  Say yes here to build support for the following Bosch accelerometers:
72	  BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
73
74	  This is a combo module with both accelerometer and magnetometer.
75	  This driver is only implementing accelerometer part, which has
76	  its own address and register map.
77
78config BMC150_ACCEL_I2C
79	tristate
80	select REGMAP_I2C
81
82config BMC150_ACCEL_SPI
83	tristate
84	select REGMAP_SPI
85
86config DA280
87	tristate "MiraMEMS DA280 3-axis 14-bit digital accelerometer driver"
88	depends on I2C
89	help
90	  Say yes here to build support for the MiraMEMS DA280 3-axis 14-bit
91	  digital accelerometer.
92
93	  To compile this driver as a module, choose M here: the
94	  module will be called da280.
95
96config DA311
97	tristate "MiraMEMS DA311 3-axis 12-bit digital accelerometer driver"
98	depends on I2C
99	help
100	  Say yes here to build support for the MiraMEMS DA311 3-axis 12-bit
101	  digital accelerometer.
102
103	  To compile this driver as a module, choose M here: the
104	  module will be called da311.
105
106config DMARD06
107	tristate "Domintech DMARD06 Digital Accelerometer Driver"
108	depends on OF || COMPILE_TEST
109	depends on I2C
110	help
111	  Say yes here to build support for the Domintech low-g tri-axial
112	  digital accelerometers: DMARD05, DMARD06, DMARD07.
113
114	  To compile this driver as a module, choose M here: the
115	  module will be called dmard06.
116
117config DMARD09
118	tristate "Domintech DMARD09 3-axis Accelerometer Driver"
119	depends on I2C
120	help
121	  Say yes here to get support for the Domintech DMARD09 3-axis
122	  accelerometer.
123
124	  Choosing M will build the driver as a module. If so, the module
125	  will be called dmard09.
126
127config DMARD10
128	tristate "Domintech DMARD10 3-axis Accelerometer Driver"
129	depends on I2C
130	help
131	  Say yes here to get support for the Domintech DMARD10 3-axis
132	  accelerometer.
133
134	  Choosing M will build the driver as a module. If so, the module
135	  will be called dmard10.
136
137config HID_SENSOR_ACCEL_3D
138	depends on HID_SENSOR_HUB
139	select IIO_BUFFER
140	select IIO_TRIGGERED_BUFFER
141	select HID_SENSOR_IIO_COMMON
142	select HID_SENSOR_IIO_TRIGGER
143	tristate "HID Accelerometers 3D"
144	help
145	  Say yes here to build support for the HID SENSOR
146	  accelerometers 3D.
147
148	  To compile this driver as a module, choose M here: the
149	  module will be called hid-sensor-accel-3d.
150
151config IIO_ST_ACCEL_3AXIS
152	tristate "STMicroelectronics accelerometers 3-Axis Driver"
153	depends on (I2C || SPI_MASTER) && SYSFS
154	depends on !SENSORS_LIS3_I2C
155	depends on !SENSORS_LIS3_SPI
156	select IIO_ST_SENSORS_CORE
157	select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
158	select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
159	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
160	help
161	  Say yes here to build support for STMicroelectronics accelerometers:
162	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
163	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
164	  LNG2DM
165
166	  This driver can also be built as a module. If so, these modules
167	  will be created:
168	  - st_accel (core functions for the driver [it is mandatory]);
169	  - st_accel_i2c (necessary for the I2C devices [optional*]);
170	  - st_accel_spi (necessary for the SPI devices [optional*]);
171
172	  (*) one of these is necessary to do something.
173
174config IIO_ST_ACCEL_I2C_3AXIS
175	tristate
176	depends on IIO_ST_ACCEL_3AXIS
177	depends on IIO_ST_SENSORS_I2C
178
179config IIO_ST_ACCEL_SPI_3AXIS
180	tristate
181	depends on IIO_ST_ACCEL_3AXIS
182	depends on IIO_ST_SENSORS_SPI
183
184config KXSD9
185	tristate "Kionix KXSD9 Accelerometer Driver"
186	select IIO_BUFFER
187	select IIO_TRIGGERED_BUFFER
188	help
189	  Say yes here to build support for the Kionix KXSD9 accelerometer.
190	  It can be accessed using an (optional) SPI or I2C interface.
191
192	  To compile this driver as a module, choose M here: the module
193	  will be called kxsd9.
194
195config KXSD9_SPI
196	tristate "Kionix KXSD9 SPI transport"
197	depends on KXSD9
198	depends on SPI
199	default KXSD9
200	select REGMAP_SPI
201	help
202	  Say yes here to enable the Kionix KXSD9 accelerometer
203	  SPI transport channel.
204
205config KXSD9_I2C
206	tristate "Kionix KXSD9 I2C transport"
207	depends on KXSD9
208	depends on I2C
209	default KXSD9
210	select REGMAP_I2C
211	help
212	  Say yes here to enable the Kionix KXSD9 accelerometer
213	  I2C transport channel.
214
215config KXCJK1013
216	tristate "Kionix 3-Axis Accelerometer Driver"
217	depends on I2C
218	select IIO_BUFFER
219	select IIO_TRIGGERED_BUFFER
220	help
221	  Say Y here if you want to build a driver for the Kionix KXCJK-1013
222	  triaxial acceleration sensor. This driver also supports KXCJ9-1008
223	  and KXTJ2-1009.
224
225	  To compile this driver as a module, choose M here: the module will
226	  be called kxcjk-1013.
227
228config MC3230
229	tristate "mCube MC3230 Digital Accelerometer Driver"
230	depends on I2C
231	help
232	  Say yes here to build support for the mCube MC3230 low-g tri-axial
233	  digital accelerometer.
234
235	  To compile this driver as a module, choose M here: the
236	  module will be called mc3230.
237
238config MMA7455
239	tristate
240	select IIO_BUFFER
241	select IIO_TRIGGERED_BUFFER
242
243config MMA7455_I2C
244	tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
245	depends on I2C
246	select MMA7455
247	select REGMAP_I2C
248	help
249	  Say yes here to build support for the Freescale MMA7455L and
250	  MMA7456L 3-axis accelerometer.
251
252	  To compile this driver as a module, choose M here: the module
253	  will be called mma7455_i2c.
254
255config MMA7455_SPI
256	tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
257	depends on SPI_MASTER
258	select MMA7455
259	select REGMAP_SPI
260	help
261	  Say yes here to build support for the Freescale MMA7455L and
262	  MMA7456L 3-axis accelerometer.
263
264	  To compile this driver as a module, choose M here: the module
265	  will be called mma7455_spi.
266
267config MMA7660
268	tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver"
269	depends on I2C
270	help
271	  Say yes here to get support for the Freescale MMA7660FC 3-Axis
272	  accelerometer.
273
274	  Choosing M will build the driver as a module. If so, the module
275	  will be called mma7660.
276
277config MMA8452
278	tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver"
279	depends on I2C
280	select IIO_BUFFER
281	select IIO_TRIGGERED_BUFFER
282	help
283	  Say yes here to build support for the following Freescale / NXP 3-axis
284	  accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC,
285	  FXLS8471Q.
286
287	  To compile this driver as a module, choose M here: the module
288	  will be called mma8452.
289
290config MMA9551_CORE
291	tristate
292
293config MMA9551
294	tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
295	depends on I2C
296	select MMA9551_CORE
297
298	help
299	  Say yes here to build support for the Freescale MMA9551L
300	  Intelligent Motion-Sensing Platform Driver.
301
302	  To compile this driver as a module, choose M here: the module
303	  will be called mma9551.
304
305config MMA9553
306	tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
307	depends on I2C
308	select MMA9551_CORE
309	help
310	  Say yes here to build support for the Freescale MMA9553L
311	  Intelligent Pedometer Platform Driver.
312
313	  To compile this driver as a module, choose M here: the module
314	  will be called mma9553.
315
316config MXC4005
317	tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
318	depends on I2C
319	select IIO_BUFFER
320	select IIO_TRIGGERED_BUFFER
321	select REGMAP_I2C
322	help
323	  Say yes here to build support for the Memsic MXC4005XC 3-axis
324	  accelerometer.
325
326	  To compile this driver as a module, choose M. The module will be
327	  called mxc4005.
328
329config MXC6255
330	tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
331	depends on I2C
332	select REGMAP_I2C
333	help
334	  Say yes here to build support for the Memsic MXC6255 Orientation
335	  Sensing Accelerometer Driver.
336
337	  To compile this driver as a module, choose M here: the module will be
338	  called mxc6255.
339
340config SCA3000
341	select IIO_BUFFER
342	select IIO_KFIFO_BUF
343	depends on SPI
344	tristate "VTI SCA3000 series accelerometers"
345	help
346	  Say Y here to build support for the VTI SCA3000 series of SPI
347	  accelerometers. These devices use a hardware ring buffer.
348
349	  To compile this driver as a module, say M here: the module will be
350	  called sca3000.
351
352config STK8312
353	tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
354	depends on I2C
355	select IIO_BUFFER
356	select IIO_TRIGGERED_BUFFER
357	help
358	  Say yes here to get support for the Sensortek STK8312 3-axis
359	  accelerometer.
360
361	  Choosing M will build the driver as a module. If so, the module
362	  will be called stk8312.
363
364config STK8BA50
365	tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
366	depends on I2C
367	select IIO_BUFFER
368	select IIO_TRIGGERED_BUFFER
369	help
370	  Say yes here to get support for the Sensortek STK8BA50 3-axis
371	  accelerometer.
372
373	  Choosing M will build the driver as a module. If so, the module
374	  will be called stk8ba50.
375
376endmenu
377