1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2018 Cadence Design Systems Inc. 4 * 5 * Author: Boris Brezillon <boris.brezillon@bootlin.com> 6 */ 7 8 #include <linux/atomic.h> 9 #include <linux/bug.h> 10 #include <linux/device.h> 11 #include <linux/err.h> 12 #include <linux/export.h> 13 #include <linux/kernel.h> 14 #include <linux/list.h> 15 #include <linux/of.h> 16 #include <linux/slab.h> 17 #include <linux/spinlock.h> 18 #include <linux/workqueue.h> 19 20 #include "internals.h" 21 22 static DEFINE_IDR(i3c_bus_idr); 23 static DEFINE_MUTEX(i3c_core_lock); 24 25 /** 26 * i3c_bus_maintenance_lock - Lock the bus for a maintenance operation 27 * @bus: I3C bus to take the lock on 28 * 29 * This function takes the bus lock so that no other operations can occur on 30 * the bus. This is needed for all kind of bus maintenance operation, like 31 * - enabling/disabling slave events 32 * - re-triggering DAA 33 * - changing the dynamic address of a device 34 * - relinquishing mastership 35 * - ... 36 * 37 * The reason for this kind of locking is that we don't want drivers and core 38 * logic to rely on I3C device information that could be changed behind their 39 * back. 40 */ 41 static void i3c_bus_maintenance_lock(struct i3c_bus *bus) 42 { 43 down_write(&bus->lock); 44 } 45 46 /** 47 * i3c_bus_maintenance_unlock - Release the bus lock after a maintenance 48 * operation 49 * @bus: I3C bus to release the lock on 50 * 51 * Should be called when the bus maintenance operation is done. See 52 * i3c_bus_maintenance_lock() for more details on what these maintenance 53 * operations are. 54 */ 55 static void i3c_bus_maintenance_unlock(struct i3c_bus *bus) 56 { 57 up_write(&bus->lock); 58 } 59 60 /** 61 * i3c_bus_normaluse_lock - Lock the bus for a normal operation 62 * @bus: I3C bus to take the lock on 63 * 64 * This function takes the bus lock for any operation that is not a maintenance 65 * operation (see i3c_bus_maintenance_lock() for a non-exhaustive list of 66 * maintenance operations). Basically all communications with I3C devices are 67 * normal operations (HDR, SDR transfers or CCC commands that do not change bus 68 * state or I3C dynamic address). 69 * 70 * Note that this lock is not guaranteeing serialization of normal operations. 71 * In other words, transfer requests passed to the I3C master can be submitted 72 * in parallel and I3C master drivers have to use their own locking to make 73 * sure two different communications are not inter-mixed, or access to the 74 * output/input queue is not done while the engine is busy. 75 */ 76 void i3c_bus_normaluse_lock(struct i3c_bus *bus) 77 { 78 down_read(&bus->lock); 79 } 80 81 /** 82 * i3c_bus_normaluse_unlock - Release the bus lock after a normal operation 83 * @bus: I3C bus to release the lock on 84 * 85 * Should be called when a normal operation is done. See 86 * i3c_bus_normaluse_lock() for more details on what these normal operations 87 * are. 88 */ 89 void i3c_bus_normaluse_unlock(struct i3c_bus *bus) 90 { 91 up_read(&bus->lock); 92 } 93 94 static struct i3c_master_controller *dev_to_i3cmaster(struct device *dev) 95 { 96 return container_of(dev, struct i3c_master_controller, dev); 97 } 98 99 static const struct device_type i3c_device_type; 100 101 static struct i3c_bus *dev_to_i3cbus(struct device *dev) 102 { 103 struct i3c_master_controller *master; 104 105 if (dev->type == &i3c_device_type) 106 return dev_to_i3cdev(dev)->bus; 107 108 master = dev_to_i3cmaster(dev); 109 110 return &master->bus; 111 } 112 113 static struct i3c_dev_desc *dev_to_i3cdesc(struct device *dev) 114 { 115 struct i3c_master_controller *master; 116 117 if (dev->type == &i3c_device_type) 118 return dev_to_i3cdev(dev)->desc; 119 120 master = container_of(dev, struct i3c_master_controller, dev); 121 122 return master->this; 123 } 124 125 static ssize_t bcr_show(struct device *dev, 126 struct device_attribute *da, 127 char *buf) 128 { 129 struct i3c_bus *bus = dev_to_i3cbus(dev); 130 struct i3c_dev_desc *desc; 131 ssize_t ret; 132 133 i3c_bus_normaluse_lock(bus); 134 desc = dev_to_i3cdesc(dev); 135 ret = sprintf(buf, "%x\n", desc->info.bcr); 136 i3c_bus_normaluse_unlock(bus); 137 138 return ret; 139 } 140 static DEVICE_ATTR_RO(bcr); 141 142 static ssize_t dcr_show(struct device *dev, 143 struct device_attribute *da, 144 char *buf) 145 { 146 struct i3c_bus *bus = dev_to_i3cbus(dev); 147 struct i3c_dev_desc *desc; 148 ssize_t ret; 149 150 i3c_bus_normaluse_lock(bus); 151 desc = dev_to_i3cdesc(dev); 152 ret = sprintf(buf, "%x\n", desc->info.dcr); 153 i3c_bus_normaluse_unlock(bus); 154 155 return ret; 156 } 157 static DEVICE_ATTR_RO(dcr); 158 159 static ssize_t pid_show(struct device *dev, 160 struct device_attribute *da, 161 char *buf) 162 { 163 struct i3c_bus *bus = dev_to_i3cbus(dev); 164 struct i3c_dev_desc *desc; 165 ssize_t ret; 166 167 i3c_bus_normaluse_lock(bus); 168 desc = dev_to_i3cdesc(dev); 169 ret = sprintf(buf, "%llx\n", desc->info.pid); 170 i3c_bus_normaluse_unlock(bus); 171 172 return ret; 173 } 174 static DEVICE_ATTR_RO(pid); 175 176 static ssize_t dynamic_address_show(struct device *dev, 177 struct device_attribute *da, 178 char *buf) 179 { 180 struct i3c_bus *bus = dev_to_i3cbus(dev); 181 struct i3c_dev_desc *desc; 182 ssize_t ret; 183 184 i3c_bus_normaluse_lock(bus); 185 desc = dev_to_i3cdesc(dev); 186 ret = sprintf(buf, "%02x\n", desc->info.dyn_addr); 187 i3c_bus_normaluse_unlock(bus); 188 189 return ret; 190 } 191 static DEVICE_ATTR_RO(dynamic_address); 192 193 static const char * const hdrcap_strings[] = { 194 "hdr-ddr", "hdr-tsp", "hdr-tsl", 195 }; 196 197 static ssize_t hdrcap_show(struct device *dev, 198 struct device_attribute *da, 199 char *buf) 200 { 201 struct i3c_bus *bus = dev_to_i3cbus(dev); 202 struct i3c_dev_desc *desc; 203 ssize_t offset = 0, ret; 204 unsigned long caps; 205 int mode; 206 207 i3c_bus_normaluse_lock(bus); 208 desc = dev_to_i3cdesc(dev); 209 caps = desc->info.hdr_cap; 210 for_each_set_bit(mode, &caps, 8) { 211 if (mode >= ARRAY_SIZE(hdrcap_strings)) 212 break; 213 214 if (!hdrcap_strings[mode]) 215 continue; 216 217 ret = sprintf(buf + offset, offset ? " %s" : "%s", 218 hdrcap_strings[mode]); 219 if (ret < 0) 220 goto out; 221 222 offset += ret; 223 } 224 225 ret = sprintf(buf + offset, "\n"); 226 if (ret < 0) 227 goto out; 228 229 ret = offset + ret; 230 231 out: 232 i3c_bus_normaluse_unlock(bus); 233 234 return ret; 235 } 236 static DEVICE_ATTR_RO(hdrcap); 237 238 static struct attribute *i3c_device_attrs[] = { 239 &dev_attr_bcr.attr, 240 &dev_attr_dcr.attr, 241 &dev_attr_pid.attr, 242 &dev_attr_dynamic_address.attr, 243 &dev_attr_hdrcap.attr, 244 NULL, 245 }; 246 ATTRIBUTE_GROUPS(i3c_device); 247 248 static int i3c_device_uevent(struct device *dev, struct kobj_uevent_env *env) 249 { 250 struct i3c_device *i3cdev = dev_to_i3cdev(dev); 251 struct i3c_device_info devinfo; 252 u16 manuf, part, ext; 253 254 i3c_device_get_info(i3cdev, &devinfo); 255 manuf = I3C_PID_MANUF_ID(devinfo.pid); 256 part = I3C_PID_PART_ID(devinfo.pid); 257 ext = I3C_PID_EXTRA_INFO(devinfo.pid); 258 259 if (I3C_PID_RND_LOWER_32BITS(devinfo.pid)) 260 return add_uevent_var(env, "MODALIAS=i3c:dcr%02Xmanuf%04X", 261 devinfo.dcr, manuf); 262 263 return add_uevent_var(env, 264 "MODALIAS=i3c:dcr%02Xmanuf%04Xpart%04xext%04x", 265 devinfo.dcr, manuf, part, ext); 266 } 267 268 static const struct device_type i3c_device_type = { 269 .groups = i3c_device_groups, 270 .uevent = i3c_device_uevent, 271 }; 272 273 static const struct i3c_device_id * 274 i3c_device_match_id(struct i3c_device *i3cdev, 275 const struct i3c_device_id *id_table) 276 { 277 struct i3c_device_info devinfo; 278 const struct i3c_device_id *id; 279 280 i3c_device_get_info(i3cdev, &devinfo); 281 282 /* 283 * The lower 32bits of the provisional ID is just filled with a random 284 * value, try to match using DCR info. 285 */ 286 if (!I3C_PID_RND_LOWER_32BITS(devinfo.pid)) { 287 u16 manuf = I3C_PID_MANUF_ID(devinfo.pid); 288 u16 part = I3C_PID_PART_ID(devinfo.pid); 289 u16 ext_info = I3C_PID_EXTRA_INFO(devinfo.pid); 290 291 /* First try to match by manufacturer/part ID. */ 292 for (id = id_table; id->match_flags != 0; id++) { 293 if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) != 294 I3C_MATCH_MANUF_AND_PART) 295 continue; 296 297 if (manuf != id->manuf_id || part != id->part_id) 298 continue; 299 300 if ((id->match_flags & I3C_MATCH_EXTRA_INFO) && 301 ext_info != id->extra_info) 302 continue; 303 304 return id; 305 } 306 } 307 308 /* Fallback to DCR match. */ 309 for (id = id_table; id->match_flags != 0; id++) { 310 if ((id->match_flags & I3C_MATCH_DCR) && 311 id->dcr == devinfo.dcr) 312 return id; 313 } 314 315 return NULL; 316 } 317 318 static int i3c_device_match(struct device *dev, struct device_driver *drv) 319 { 320 struct i3c_device *i3cdev; 321 struct i3c_driver *i3cdrv; 322 323 if (dev->type != &i3c_device_type) 324 return 0; 325 326 i3cdev = dev_to_i3cdev(dev); 327 i3cdrv = drv_to_i3cdrv(drv); 328 if (i3c_device_match_id(i3cdev, i3cdrv->id_table)) 329 return 1; 330 331 return 0; 332 } 333 334 static int i3c_device_probe(struct device *dev) 335 { 336 struct i3c_device *i3cdev = dev_to_i3cdev(dev); 337 struct i3c_driver *driver = drv_to_i3cdrv(dev->driver); 338 339 return driver->probe(i3cdev); 340 } 341 342 static int i3c_device_remove(struct device *dev) 343 { 344 struct i3c_device *i3cdev = dev_to_i3cdev(dev); 345 struct i3c_driver *driver = drv_to_i3cdrv(dev->driver); 346 int ret; 347 348 ret = driver->remove(i3cdev); 349 if (ret) 350 return ret; 351 352 i3c_device_free_ibi(i3cdev); 353 354 return ret; 355 } 356 357 struct bus_type i3c_bus_type = { 358 .name = "i3c", 359 .match = i3c_device_match, 360 .probe = i3c_device_probe, 361 .remove = i3c_device_remove, 362 }; 363 364 static enum i3c_addr_slot_status 365 i3c_bus_get_addr_slot_status(struct i3c_bus *bus, u16 addr) 366 { 367 int status, bitpos = addr * 2; 368 369 if (addr > I2C_MAX_ADDR) 370 return I3C_ADDR_SLOT_RSVD; 371 372 status = bus->addrslots[bitpos / BITS_PER_LONG]; 373 status >>= bitpos % BITS_PER_LONG; 374 375 return status & I3C_ADDR_SLOT_STATUS_MASK; 376 } 377 378 static void i3c_bus_set_addr_slot_status(struct i3c_bus *bus, u16 addr, 379 enum i3c_addr_slot_status status) 380 { 381 int bitpos = addr * 2; 382 unsigned long *ptr; 383 384 if (addr > I2C_MAX_ADDR) 385 return; 386 387 ptr = bus->addrslots + (bitpos / BITS_PER_LONG); 388 *ptr &= ~(I3C_ADDR_SLOT_STATUS_MASK << (bitpos % BITS_PER_LONG)); 389 *ptr |= status << (bitpos % BITS_PER_LONG); 390 } 391 392 static bool i3c_bus_dev_addr_is_avail(struct i3c_bus *bus, u8 addr) 393 { 394 enum i3c_addr_slot_status status; 395 396 status = i3c_bus_get_addr_slot_status(bus, addr); 397 398 return status == I3C_ADDR_SLOT_FREE; 399 } 400 401 static int i3c_bus_get_free_addr(struct i3c_bus *bus, u8 start_addr) 402 { 403 enum i3c_addr_slot_status status; 404 u8 addr; 405 406 for (addr = start_addr; addr < I3C_MAX_ADDR; addr++) { 407 status = i3c_bus_get_addr_slot_status(bus, addr); 408 if (status == I3C_ADDR_SLOT_FREE) 409 return addr; 410 } 411 412 return -ENOMEM; 413 } 414 415 static void i3c_bus_init_addrslots(struct i3c_bus *bus) 416 { 417 int i; 418 419 /* Addresses 0 to 7 are reserved. */ 420 for (i = 0; i < 8; i++) 421 i3c_bus_set_addr_slot_status(bus, i, I3C_ADDR_SLOT_RSVD); 422 423 /* 424 * Reserve broadcast address and all addresses that might collide 425 * with the broadcast address when facing a single bit error. 426 */ 427 i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR, 428 I3C_ADDR_SLOT_RSVD); 429 for (i = 0; i < 7; i++) 430 i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR ^ BIT(i), 431 I3C_ADDR_SLOT_RSVD); 432 } 433 434 static void i3c_bus_cleanup(struct i3c_bus *i3cbus) 435 { 436 mutex_lock(&i3c_core_lock); 437 idr_remove(&i3c_bus_idr, i3cbus->id); 438 mutex_unlock(&i3c_core_lock); 439 } 440 441 static int i3c_bus_init(struct i3c_bus *i3cbus) 442 { 443 int ret; 444 445 init_rwsem(&i3cbus->lock); 446 INIT_LIST_HEAD(&i3cbus->devs.i2c); 447 INIT_LIST_HEAD(&i3cbus->devs.i3c); 448 i3c_bus_init_addrslots(i3cbus); 449 i3cbus->mode = I3C_BUS_MODE_PURE; 450 451 mutex_lock(&i3c_core_lock); 452 ret = idr_alloc(&i3c_bus_idr, i3cbus, 0, 0, GFP_KERNEL); 453 mutex_unlock(&i3c_core_lock); 454 455 if (ret < 0) 456 return ret; 457 458 i3cbus->id = ret; 459 460 return 0; 461 } 462 463 static const char * const i3c_bus_mode_strings[] = { 464 [I3C_BUS_MODE_PURE] = "pure", 465 [I3C_BUS_MODE_MIXED_FAST] = "mixed-fast", 466 [I3C_BUS_MODE_MIXED_SLOW] = "mixed-slow", 467 }; 468 469 static ssize_t mode_show(struct device *dev, 470 struct device_attribute *da, 471 char *buf) 472 { 473 struct i3c_bus *i3cbus = dev_to_i3cbus(dev); 474 ssize_t ret; 475 476 i3c_bus_normaluse_lock(i3cbus); 477 if (i3cbus->mode < 0 || 478 i3cbus->mode >= ARRAY_SIZE(i3c_bus_mode_strings) || 479 !i3c_bus_mode_strings[i3cbus->mode]) 480 ret = sprintf(buf, "unknown\n"); 481 else 482 ret = sprintf(buf, "%s\n", i3c_bus_mode_strings[i3cbus->mode]); 483 i3c_bus_normaluse_unlock(i3cbus); 484 485 return ret; 486 } 487 static DEVICE_ATTR_RO(mode); 488 489 static ssize_t current_master_show(struct device *dev, 490 struct device_attribute *da, 491 char *buf) 492 { 493 struct i3c_bus *i3cbus = dev_to_i3cbus(dev); 494 ssize_t ret; 495 496 i3c_bus_normaluse_lock(i3cbus); 497 ret = sprintf(buf, "%d-%llx\n", i3cbus->id, 498 i3cbus->cur_master->info.pid); 499 i3c_bus_normaluse_unlock(i3cbus); 500 501 return ret; 502 } 503 static DEVICE_ATTR_RO(current_master); 504 505 static ssize_t i3c_scl_frequency_show(struct device *dev, 506 struct device_attribute *da, 507 char *buf) 508 { 509 struct i3c_bus *i3cbus = dev_to_i3cbus(dev); 510 ssize_t ret; 511 512 i3c_bus_normaluse_lock(i3cbus); 513 ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i3c); 514 i3c_bus_normaluse_unlock(i3cbus); 515 516 return ret; 517 } 518 static DEVICE_ATTR_RO(i3c_scl_frequency); 519 520 static ssize_t i2c_scl_frequency_show(struct device *dev, 521 struct device_attribute *da, 522 char *buf) 523 { 524 struct i3c_bus *i3cbus = dev_to_i3cbus(dev); 525 ssize_t ret; 526 527 i3c_bus_normaluse_lock(i3cbus); 528 ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i2c); 529 i3c_bus_normaluse_unlock(i3cbus); 530 531 return ret; 532 } 533 static DEVICE_ATTR_RO(i2c_scl_frequency); 534 535 static struct attribute *i3c_masterdev_attrs[] = { 536 &dev_attr_mode.attr, 537 &dev_attr_current_master.attr, 538 &dev_attr_i3c_scl_frequency.attr, 539 &dev_attr_i2c_scl_frequency.attr, 540 &dev_attr_bcr.attr, 541 &dev_attr_dcr.attr, 542 &dev_attr_pid.attr, 543 &dev_attr_dynamic_address.attr, 544 &dev_attr_hdrcap.attr, 545 NULL, 546 }; 547 ATTRIBUTE_GROUPS(i3c_masterdev); 548 549 static void i3c_masterdev_release(struct device *dev) 550 { 551 struct i3c_master_controller *master = dev_to_i3cmaster(dev); 552 struct i3c_bus *bus = dev_to_i3cbus(dev); 553 554 if (master->wq) 555 destroy_workqueue(master->wq); 556 557 WARN_ON(!list_empty(&bus->devs.i2c) || !list_empty(&bus->devs.i3c)); 558 i3c_bus_cleanup(bus); 559 560 of_node_put(dev->of_node); 561 } 562 563 static const struct device_type i3c_masterdev_type = { 564 .groups = i3c_masterdev_groups, 565 }; 566 567 int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode) 568 { 569 i3cbus->mode = mode; 570 571 if (!i3cbus->scl_rate.i3c) 572 i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE; 573 574 if (!i3cbus->scl_rate.i2c) { 575 if (i3cbus->mode == I3C_BUS_MODE_MIXED_SLOW) 576 i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE; 577 else 578 i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_PLUS_SCL_RATE; 579 } 580 581 /* 582 * I3C/I2C frequency may have been overridden, check that user-provided 583 * values are not exceeding max possible frequency. 584 */ 585 if (i3cbus->scl_rate.i3c > I3C_BUS_MAX_I3C_SCL_RATE || 586 i3cbus->scl_rate.i2c > I3C_BUS_I2C_FM_PLUS_SCL_RATE) 587 return -EINVAL; 588 589 return 0; 590 } 591 592 static struct i3c_master_controller * 593 i2c_adapter_to_i3c_master(struct i2c_adapter *adap) 594 { 595 return container_of(adap, struct i3c_master_controller, i2c); 596 } 597 598 static struct i2c_adapter * 599 i3c_master_to_i2c_adapter(struct i3c_master_controller *master) 600 { 601 return &master->i2c; 602 } 603 604 static void i3c_master_free_i2c_dev(struct i2c_dev_desc *dev) 605 { 606 kfree(dev); 607 } 608 609 static struct i2c_dev_desc * 610 i3c_master_alloc_i2c_dev(struct i3c_master_controller *master, 611 const struct i2c_dev_boardinfo *boardinfo) 612 { 613 struct i2c_dev_desc *dev; 614 615 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 616 if (!dev) 617 return ERR_PTR(-ENOMEM); 618 619 dev->common.master = master; 620 dev->boardinfo = boardinfo; 621 622 return dev; 623 } 624 625 static void *i3c_ccc_cmd_dest_init(struct i3c_ccc_cmd_dest *dest, u8 addr, 626 u16 payloadlen) 627 { 628 dest->addr = addr; 629 dest->payload.len = payloadlen; 630 if (payloadlen) 631 dest->payload.data = kzalloc(payloadlen, GFP_KERNEL); 632 else 633 dest->payload.data = NULL; 634 635 return dest->payload.data; 636 } 637 638 static void i3c_ccc_cmd_dest_cleanup(struct i3c_ccc_cmd_dest *dest) 639 { 640 kfree(dest->payload.data); 641 } 642 643 static void i3c_ccc_cmd_init(struct i3c_ccc_cmd *cmd, bool rnw, u8 id, 644 struct i3c_ccc_cmd_dest *dests, 645 unsigned int ndests) 646 { 647 cmd->rnw = rnw ? 1 : 0; 648 cmd->id = id; 649 cmd->dests = dests; 650 cmd->ndests = ndests; 651 cmd->err = I3C_ERROR_UNKNOWN; 652 } 653 654 static int i3c_master_send_ccc_cmd_locked(struct i3c_master_controller *master, 655 struct i3c_ccc_cmd *cmd) 656 { 657 int ret; 658 659 if (!cmd || !master) 660 return -EINVAL; 661 662 if (WARN_ON(master->init_done && 663 !rwsem_is_locked(&master->bus.lock))) 664 return -EINVAL; 665 666 if (!master->ops->send_ccc_cmd) 667 return -ENOTSUPP; 668 669 if ((cmd->id & I3C_CCC_DIRECT) && (!cmd->dests || !cmd->ndests)) 670 return -EINVAL; 671 672 if (master->ops->supports_ccc_cmd && 673 !master->ops->supports_ccc_cmd(master, cmd)) 674 return -ENOTSUPP; 675 676 ret = master->ops->send_ccc_cmd(master, cmd); 677 if (ret) { 678 if (cmd->err != I3C_ERROR_UNKNOWN) 679 return cmd->err; 680 681 return ret; 682 } 683 684 return 0; 685 } 686 687 static struct i2c_dev_desc * 688 i3c_master_find_i2c_dev_by_addr(const struct i3c_master_controller *master, 689 u16 addr) 690 { 691 struct i2c_dev_desc *dev; 692 693 i3c_bus_for_each_i2cdev(&master->bus, dev) { 694 if (dev->boardinfo->base.addr == addr) 695 return dev; 696 } 697 698 return NULL; 699 } 700 701 /** 702 * i3c_master_get_free_addr() - get a free address on the bus 703 * @master: I3C master object 704 * @start_addr: where to start searching 705 * 706 * This function must be called with the bus lock held in write mode. 707 * 708 * Return: the first free address starting at @start_addr (included) or -ENOMEM 709 * if there's no more address available. 710 */ 711 int i3c_master_get_free_addr(struct i3c_master_controller *master, 712 u8 start_addr) 713 { 714 return i3c_bus_get_free_addr(&master->bus, start_addr); 715 } 716 EXPORT_SYMBOL_GPL(i3c_master_get_free_addr); 717 718 static void i3c_device_release(struct device *dev) 719 { 720 struct i3c_device *i3cdev = dev_to_i3cdev(dev); 721 722 WARN_ON(i3cdev->desc); 723 724 of_node_put(i3cdev->dev.of_node); 725 kfree(i3cdev); 726 } 727 728 static void i3c_master_free_i3c_dev(struct i3c_dev_desc *dev) 729 { 730 kfree(dev); 731 } 732 733 static struct i3c_dev_desc * 734 i3c_master_alloc_i3c_dev(struct i3c_master_controller *master, 735 const struct i3c_device_info *info) 736 { 737 struct i3c_dev_desc *dev; 738 739 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 740 if (!dev) 741 return ERR_PTR(-ENOMEM); 742 743 dev->common.master = master; 744 dev->info = *info; 745 mutex_init(&dev->ibi_lock); 746 747 return dev; 748 } 749 750 static int i3c_master_rstdaa_locked(struct i3c_master_controller *master, 751 u8 addr) 752 { 753 enum i3c_addr_slot_status addrstat; 754 struct i3c_ccc_cmd_dest dest; 755 struct i3c_ccc_cmd cmd; 756 int ret; 757 758 if (!master) 759 return -EINVAL; 760 761 addrstat = i3c_bus_get_addr_slot_status(&master->bus, addr); 762 if (addr != I3C_BROADCAST_ADDR && addrstat != I3C_ADDR_SLOT_I3C_DEV) 763 return -EINVAL; 764 765 i3c_ccc_cmd_dest_init(&dest, addr, 0); 766 i3c_ccc_cmd_init(&cmd, false, 767 I3C_CCC_RSTDAA(addr == I3C_BROADCAST_ADDR), 768 &dest, 1); 769 ret = i3c_master_send_ccc_cmd_locked(master, &cmd); 770 i3c_ccc_cmd_dest_cleanup(&dest); 771 772 return ret; 773 } 774 775 /** 776 * i3c_master_entdaa_locked() - start a DAA (Dynamic Address Assignment) 777 * procedure 778 * @master: master used to send frames on the bus 779 * 780 * Send a ENTDAA CCC command to start a DAA procedure. 781 * 782 * Note that this function only sends the ENTDAA CCC command, all the logic 783 * behind dynamic address assignment has to be handled in the I3C master 784 * driver. 785 * 786 * This function must be called with the bus lock held in write mode. 787 * 788 * Return: 0 in case of success, a positive I3C error code if the error is 789 * one of the official Mx error codes, and a negative error code otherwise. 790 */ 791 int i3c_master_entdaa_locked(struct i3c_master_controller *master) 792 { 793 struct i3c_ccc_cmd_dest dest; 794 struct i3c_ccc_cmd cmd; 795 int ret; 796 797 i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR, 0); 798 i3c_ccc_cmd_init(&cmd, false, I3C_CCC_ENTDAA, &dest, 1); 799 ret = i3c_master_send_ccc_cmd_locked(master, &cmd); 800 i3c_ccc_cmd_dest_cleanup(&dest); 801 802 return ret; 803 } 804 EXPORT_SYMBOL_GPL(i3c_master_entdaa_locked); 805 806 static int i3c_master_enec_disec_locked(struct i3c_master_controller *master, 807 u8 addr, bool enable, u8 evts) 808 { 809 struct i3c_ccc_events *events; 810 struct i3c_ccc_cmd_dest dest; 811 struct i3c_ccc_cmd cmd; 812 int ret; 813 814 events = i3c_ccc_cmd_dest_init(&dest, addr, sizeof(*events)); 815 if (!events) 816 return -ENOMEM; 817 818 events->events = evts; 819 i3c_ccc_cmd_init(&cmd, false, 820 enable ? 821 I3C_CCC_ENEC(addr == I3C_BROADCAST_ADDR) : 822 I3C_CCC_DISEC(addr == I3C_BROADCAST_ADDR), 823 &dest, 1); 824 ret = i3c_master_send_ccc_cmd_locked(master, &cmd); 825 i3c_ccc_cmd_dest_cleanup(&dest); 826 827 return ret; 828 } 829 830 /** 831 * i3c_master_disec_locked() - send a DISEC CCC command 832 * @master: master used to send frames on the bus 833 * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR 834 * @evts: events to disable 835 * 836 * Send a DISEC CCC command to disable some or all events coming from a 837 * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR. 838 * 839 * This function must be called with the bus lock held in write mode. 840 * 841 * Return: 0 in case of success, a positive I3C error code if the error is 842 * one of the official Mx error codes, and a negative error code otherwise. 843 */ 844 int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr, 845 u8 evts) 846 { 847 return i3c_master_enec_disec_locked(master, addr, false, evts); 848 } 849 EXPORT_SYMBOL_GPL(i3c_master_disec_locked); 850 851 /** 852 * i3c_master_enec_locked() - send an ENEC CCC command 853 * @master: master used to send frames on the bus 854 * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR 855 * @evts: events to disable 856 * 857 * Sends an ENEC CCC command to enable some or all events coming from a 858 * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR. 859 * 860 * This function must be called with the bus lock held in write mode. 861 * 862 * Return: 0 in case of success, a positive I3C error code if the error is 863 * one of the official Mx error codes, and a negative error code otherwise. 864 */ 865 int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr, 866 u8 evts) 867 { 868 return i3c_master_enec_disec_locked(master, addr, true, evts); 869 } 870 EXPORT_SYMBOL_GPL(i3c_master_enec_locked); 871 872 /** 873 * i3c_master_defslvs_locked() - send a DEFSLVS CCC command 874 * @master: master used to send frames on the bus 875 * 876 * Send a DEFSLVS CCC command containing all the devices known to the @master. 877 * This is useful when you have secondary masters on the bus to propagate 878 * device information. 879 * 880 * This should be called after all I3C devices have been discovered (in other 881 * words, after the DAA procedure has finished) and instantiated in 882 * &i3c_master_controller_ops->bus_init(). 883 * It should also be called if a master ACKed an Hot-Join request and assigned 884 * a dynamic address to the device joining the bus. 885 * 886 * This function must be called with the bus lock held in write mode. 887 * 888 * Return: 0 in case of success, a positive I3C error code if the error is 889 * one of the official Mx error codes, and a negative error code otherwise. 890 */ 891 int i3c_master_defslvs_locked(struct i3c_master_controller *master) 892 { 893 struct i3c_ccc_defslvs *defslvs; 894 struct i3c_ccc_dev_desc *desc; 895 struct i3c_ccc_cmd_dest dest; 896 struct i3c_dev_desc *i3cdev; 897 struct i2c_dev_desc *i2cdev; 898 struct i3c_ccc_cmd cmd; 899 struct i3c_bus *bus; 900 bool send = false; 901 int ndevs = 0, ret; 902 903 if (!master) 904 return -EINVAL; 905 906 bus = i3c_master_get_bus(master); 907 i3c_bus_for_each_i3cdev(bus, i3cdev) { 908 ndevs++; 909 910 if (i3cdev == master->this) 911 continue; 912 913 if (I3C_BCR_DEVICE_ROLE(i3cdev->info.bcr) == 914 I3C_BCR_I3C_MASTER) 915 send = true; 916 } 917 918 /* No other master on the bus, skip DEFSLVS. */ 919 if (!send) 920 return 0; 921 922 i3c_bus_for_each_i2cdev(bus, i2cdev) 923 ndevs++; 924 925 defslvs = i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR, 926 sizeof(*defslvs) + 927 ((ndevs - 1) * 928 sizeof(struct i3c_ccc_dev_desc))); 929 if (!defslvs) 930 return -ENOMEM; 931 932 defslvs->count = ndevs; 933 defslvs->master.bcr = master->this->info.bcr; 934 defslvs->master.dcr = master->this->info.dcr; 935 defslvs->master.dyn_addr = master->this->info.dyn_addr << 1; 936 defslvs->master.static_addr = I3C_BROADCAST_ADDR << 1; 937 938 desc = defslvs->slaves; 939 i3c_bus_for_each_i2cdev(bus, i2cdev) { 940 desc->lvr = i2cdev->boardinfo->lvr; 941 desc->static_addr = i2cdev->boardinfo->base.addr << 1; 942 desc++; 943 } 944 945 i3c_bus_for_each_i3cdev(bus, i3cdev) { 946 /* Skip the I3C dev representing this master. */ 947 if (i3cdev == master->this) 948 continue; 949 950 desc->bcr = i3cdev->info.bcr; 951 desc->dcr = i3cdev->info.dcr; 952 desc->dyn_addr = i3cdev->info.dyn_addr << 1; 953 desc->static_addr = i3cdev->info.static_addr << 1; 954 desc++; 955 } 956 957 i3c_ccc_cmd_init(&cmd, false, I3C_CCC_DEFSLVS, &dest, 1); 958 ret = i3c_master_send_ccc_cmd_locked(master, &cmd); 959 i3c_ccc_cmd_dest_cleanup(&dest); 960 961 return ret; 962 } 963 EXPORT_SYMBOL_GPL(i3c_master_defslvs_locked); 964 965 static int i3c_master_setda_locked(struct i3c_master_controller *master, 966 u8 oldaddr, u8 newaddr, bool setdasa) 967 { 968 struct i3c_ccc_cmd_dest dest; 969 struct i3c_ccc_setda *setda; 970 struct i3c_ccc_cmd cmd; 971 int ret; 972 973 if (!oldaddr || !newaddr) 974 return -EINVAL; 975 976 setda = i3c_ccc_cmd_dest_init(&dest, oldaddr, sizeof(*setda)); 977 if (!setda) 978 return -ENOMEM; 979 980 setda->addr = newaddr << 1; 981 i3c_ccc_cmd_init(&cmd, false, 982 setdasa ? I3C_CCC_SETDASA : I3C_CCC_SETNEWDA, 983 &dest, 1); 984 ret = i3c_master_send_ccc_cmd_locked(master, &cmd); 985 i3c_ccc_cmd_dest_cleanup(&dest); 986 987 return ret; 988 } 989 990 static int i3c_master_setdasa_locked(struct i3c_master_controller *master, 991 u8 static_addr, u8 dyn_addr) 992 { 993 return i3c_master_setda_locked(master, static_addr, dyn_addr, true); 994 } 995 996 static int i3c_master_setnewda_locked(struct i3c_master_controller *master, 997 u8 oldaddr, u8 newaddr) 998 { 999 return i3c_master_setda_locked(master, oldaddr, newaddr, false); 1000 } 1001 1002 static int i3c_master_getmrl_locked(struct i3c_master_controller *master, 1003 struct i3c_device_info *info) 1004 { 1005 struct i3c_ccc_cmd_dest dest; 1006 unsigned int expected_len; 1007 struct i3c_ccc_mrl *mrl; 1008 struct i3c_ccc_cmd cmd; 1009 int ret; 1010 1011 mrl = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*mrl)); 1012 if (!mrl) 1013 return -ENOMEM; 1014 1015 /* 1016 * When the device does not have IBI payload GETMRL only returns 2 1017 * bytes of data. 1018 */ 1019 if (!(info->bcr & I3C_BCR_IBI_PAYLOAD)) 1020 dest.payload.len -= 1; 1021 1022 expected_len = dest.payload.len; 1023 i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMRL, &dest, 1); 1024 ret = i3c_master_send_ccc_cmd_locked(master, &cmd); 1025 if (ret) 1026 goto out; 1027 1028 if (dest.payload.len != expected_len) { 1029 ret = -EIO; 1030 goto out; 1031 } 1032 1033 info->max_read_len = be16_to_cpu(mrl->read_len); 1034 1035 if (info->bcr & I3C_BCR_IBI_PAYLOAD) 1036 info->max_ibi_len = mrl->ibi_len; 1037 1038 out: 1039 i3c_ccc_cmd_dest_cleanup(&dest); 1040 1041 return ret; 1042 } 1043 1044 static int i3c_master_getmwl_locked(struct i3c_master_controller *master, 1045 struct i3c_device_info *info) 1046 { 1047 struct i3c_ccc_cmd_dest dest; 1048 struct i3c_ccc_mwl *mwl; 1049 struct i3c_ccc_cmd cmd; 1050 int ret; 1051 1052 mwl = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*mwl)); 1053 if (!mwl) 1054 return -ENOMEM; 1055 1056 i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMWL, &dest, 1); 1057 ret = i3c_master_send_ccc_cmd_locked(master, &cmd); 1058 if (ret) 1059 goto out; 1060 1061 if (dest.payload.len != sizeof(*mwl)) 1062 return -EIO; 1063 1064 info->max_write_len = be16_to_cpu(mwl->len); 1065 1066 out: 1067 i3c_ccc_cmd_dest_cleanup(&dest); 1068 1069 return ret; 1070 } 1071 1072 static int i3c_master_getmxds_locked(struct i3c_master_controller *master, 1073 struct i3c_device_info *info) 1074 { 1075 struct i3c_ccc_getmxds *getmaxds; 1076 struct i3c_ccc_cmd_dest dest; 1077 struct i3c_ccc_cmd cmd; 1078 int ret; 1079 1080 getmaxds = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, 1081 sizeof(*getmaxds)); 1082 if (!getmaxds) 1083 return -ENOMEM; 1084 1085 i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMXDS, &dest, 1); 1086 ret = i3c_master_send_ccc_cmd_locked(master, &cmd); 1087 if (ret) 1088 goto out; 1089 1090 if (dest.payload.len != 2 && dest.payload.len != 5) { 1091 ret = -EIO; 1092 goto out; 1093 } 1094 1095 info->max_read_ds = getmaxds->maxrd; 1096 info->max_write_ds = getmaxds->maxwr; 1097 if (dest.payload.len == 5) 1098 info->max_read_turnaround = getmaxds->maxrdturn[0] | 1099 ((u32)getmaxds->maxrdturn[1] << 8) | 1100 ((u32)getmaxds->maxrdturn[2] << 16); 1101 1102 out: 1103 i3c_ccc_cmd_dest_cleanup(&dest); 1104 1105 return ret; 1106 } 1107 1108 static int i3c_master_gethdrcap_locked(struct i3c_master_controller *master, 1109 struct i3c_device_info *info) 1110 { 1111 struct i3c_ccc_gethdrcap *gethdrcap; 1112 struct i3c_ccc_cmd_dest dest; 1113 struct i3c_ccc_cmd cmd; 1114 int ret; 1115 1116 gethdrcap = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, 1117 sizeof(*gethdrcap)); 1118 if (!gethdrcap) 1119 return -ENOMEM; 1120 1121 i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETHDRCAP, &dest, 1); 1122 ret = i3c_master_send_ccc_cmd_locked(master, &cmd); 1123 if (ret) 1124 goto out; 1125 1126 if (dest.payload.len != 1) { 1127 ret = -EIO; 1128 goto out; 1129 } 1130 1131 info->hdr_cap = gethdrcap->modes; 1132 1133 out: 1134 i3c_ccc_cmd_dest_cleanup(&dest); 1135 1136 return ret; 1137 } 1138 1139 static int i3c_master_getpid_locked(struct i3c_master_controller *master, 1140 struct i3c_device_info *info) 1141 { 1142 struct i3c_ccc_getpid *getpid; 1143 struct i3c_ccc_cmd_dest dest; 1144 struct i3c_ccc_cmd cmd; 1145 int ret, i; 1146 1147 getpid = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getpid)); 1148 if (!getpid) 1149 return -ENOMEM; 1150 1151 i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETPID, &dest, 1); 1152 ret = i3c_master_send_ccc_cmd_locked(master, &cmd); 1153 if (ret) 1154 goto out; 1155 1156 info->pid = 0; 1157 for (i = 0; i < sizeof(getpid->pid); i++) { 1158 int sft = (sizeof(getpid->pid) - i - 1) * 8; 1159 1160 info->pid |= (u64)getpid->pid[i] << sft; 1161 } 1162 1163 out: 1164 i3c_ccc_cmd_dest_cleanup(&dest); 1165 1166 return ret; 1167 } 1168 1169 static int i3c_master_getbcr_locked(struct i3c_master_controller *master, 1170 struct i3c_device_info *info) 1171 { 1172 struct i3c_ccc_getbcr *getbcr; 1173 struct i3c_ccc_cmd_dest dest; 1174 struct i3c_ccc_cmd cmd; 1175 int ret; 1176 1177 getbcr = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getbcr)); 1178 if (!getbcr) 1179 return -ENOMEM; 1180 1181 i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETBCR, &dest, 1); 1182 ret = i3c_master_send_ccc_cmd_locked(master, &cmd); 1183 if (ret) 1184 goto out; 1185 1186 info->bcr = getbcr->bcr; 1187 1188 out: 1189 i3c_ccc_cmd_dest_cleanup(&dest); 1190 1191 return ret; 1192 } 1193 1194 static int i3c_master_getdcr_locked(struct i3c_master_controller *master, 1195 struct i3c_device_info *info) 1196 { 1197 struct i3c_ccc_getdcr *getdcr; 1198 struct i3c_ccc_cmd_dest dest; 1199 struct i3c_ccc_cmd cmd; 1200 int ret; 1201 1202 getdcr = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getdcr)); 1203 if (!getdcr) 1204 return -ENOMEM; 1205 1206 i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETDCR, &dest, 1); 1207 ret = i3c_master_send_ccc_cmd_locked(master, &cmd); 1208 if (ret) 1209 goto out; 1210 1211 info->dcr = getdcr->dcr; 1212 1213 out: 1214 i3c_ccc_cmd_dest_cleanup(&dest); 1215 1216 return ret; 1217 } 1218 1219 static int i3c_master_retrieve_dev_info(struct i3c_dev_desc *dev) 1220 { 1221 struct i3c_master_controller *master = i3c_dev_get_master(dev); 1222 enum i3c_addr_slot_status slot_status; 1223 int ret; 1224 1225 if (!dev->info.dyn_addr) 1226 return -EINVAL; 1227 1228 slot_status = i3c_bus_get_addr_slot_status(&master->bus, 1229 dev->info.dyn_addr); 1230 if (slot_status == I3C_ADDR_SLOT_RSVD || 1231 slot_status == I3C_ADDR_SLOT_I2C_DEV) 1232 return -EINVAL; 1233 1234 ret = i3c_master_getpid_locked(master, &dev->info); 1235 if (ret) 1236 return ret; 1237 1238 ret = i3c_master_getbcr_locked(master, &dev->info); 1239 if (ret) 1240 return ret; 1241 1242 ret = i3c_master_getdcr_locked(master, &dev->info); 1243 if (ret) 1244 return ret; 1245 1246 if (dev->info.bcr & I3C_BCR_MAX_DATA_SPEED_LIM) { 1247 ret = i3c_master_getmxds_locked(master, &dev->info); 1248 if (ret) 1249 return ret; 1250 } 1251 1252 if (dev->info.bcr & I3C_BCR_IBI_PAYLOAD) 1253 dev->info.max_ibi_len = 1; 1254 1255 i3c_master_getmrl_locked(master, &dev->info); 1256 i3c_master_getmwl_locked(master, &dev->info); 1257 1258 if (dev->info.bcr & I3C_BCR_HDR_CAP) { 1259 ret = i3c_master_gethdrcap_locked(master, &dev->info); 1260 if (ret) 1261 return ret; 1262 } 1263 1264 return 0; 1265 } 1266 1267 static void i3c_master_put_i3c_addrs(struct i3c_dev_desc *dev) 1268 { 1269 struct i3c_master_controller *master = i3c_dev_get_master(dev); 1270 1271 if (dev->info.static_addr) 1272 i3c_bus_set_addr_slot_status(&master->bus, 1273 dev->info.static_addr, 1274 I3C_ADDR_SLOT_FREE); 1275 1276 if (dev->info.dyn_addr) 1277 i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, 1278 I3C_ADDR_SLOT_FREE); 1279 1280 if (dev->boardinfo && dev->boardinfo->init_dyn_addr) 1281 i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, 1282 I3C_ADDR_SLOT_FREE); 1283 } 1284 1285 static int i3c_master_get_i3c_addrs(struct i3c_dev_desc *dev) 1286 { 1287 struct i3c_master_controller *master = i3c_dev_get_master(dev); 1288 enum i3c_addr_slot_status status; 1289 1290 if (!dev->info.static_addr && !dev->info.dyn_addr) 1291 return 0; 1292 1293 if (dev->info.static_addr) { 1294 status = i3c_bus_get_addr_slot_status(&master->bus, 1295 dev->info.static_addr); 1296 if (status != I3C_ADDR_SLOT_FREE) 1297 return -EBUSY; 1298 1299 i3c_bus_set_addr_slot_status(&master->bus, 1300 dev->info.static_addr, 1301 I3C_ADDR_SLOT_I3C_DEV); 1302 } 1303 1304 /* 1305 * ->init_dyn_addr should have been reserved before that, so, if we're 1306 * trying to apply a pre-reserved dynamic address, we should not try 1307 * to reserve the address slot a second time. 1308 */ 1309 if (dev->info.dyn_addr && 1310 (!dev->boardinfo || 1311 dev->boardinfo->init_dyn_addr != dev->info.dyn_addr)) { 1312 status = i3c_bus_get_addr_slot_status(&master->bus, 1313 dev->info.dyn_addr); 1314 if (status != I3C_ADDR_SLOT_FREE) 1315 goto err_release_static_addr; 1316 1317 i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, 1318 I3C_ADDR_SLOT_I3C_DEV); 1319 } 1320 1321 return 0; 1322 1323 err_release_static_addr: 1324 if (dev->info.static_addr) 1325 i3c_bus_set_addr_slot_status(&master->bus, 1326 dev->info.static_addr, 1327 I3C_ADDR_SLOT_FREE); 1328 1329 return -EBUSY; 1330 } 1331 1332 static int i3c_master_attach_i3c_dev(struct i3c_master_controller *master, 1333 struct i3c_dev_desc *dev) 1334 { 1335 int ret; 1336 1337 /* 1338 * We don't attach devices to the controller until they are 1339 * addressable on the bus. 1340 */ 1341 if (!dev->info.static_addr && !dev->info.dyn_addr) 1342 return 0; 1343 1344 ret = i3c_master_get_i3c_addrs(dev); 1345 if (ret) 1346 return ret; 1347 1348 /* Do not attach the master device itself. */ 1349 if (master->this != dev && master->ops->attach_i3c_dev) { 1350 ret = master->ops->attach_i3c_dev(dev); 1351 if (ret) { 1352 i3c_master_put_i3c_addrs(dev); 1353 return ret; 1354 } 1355 } 1356 1357 list_add_tail(&dev->common.node, &master->bus.devs.i3c); 1358 1359 return 0; 1360 } 1361 1362 static int i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev, 1363 u8 old_dyn_addr) 1364 { 1365 struct i3c_master_controller *master = i3c_dev_get_master(dev); 1366 enum i3c_addr_slot_status status; 1367 int ret; 1368 1369 if (dev->info.dyn_addr != old_dyn_addr) { 1370 status = i3c_bus_get_addr_slot_status(&master->bus, 1371 dev->info.dyn_addr); 1372 if (status != I3C_ADDR_SLOT_FREE) 1373 return -EBUSY; 1374 i3c_bus_set_addr_slot_status(&master->bus, 1375 dev->info.dyn_addr, 1376 I3C_ADDR_SLOT_I3C_DEV); 1377 } 1378 1379 if (master->ops->reattach_i3c_dev) { 1380 ret = master->ops->reattach_i3c_dev(dev, old_dyn_addr); 1381 if (ret) { 1382 i3c_master_put_i3c_addrs(dev); 1383 return ret; 1384 } 1385 } 1386 1387 return 0; 1388 } 1389 1390 static void i3c_master_detach_i3c_dev(struct i3c_dev_desc *dev) 1391 { 1392 struct i3c_master_controller *master = i3c_dev_get_master(dev); 1393 1394 /* Do not detach the master device itself. */ 1395 if (master->this != dev && master->ops->detach_i3c_dev) 1396 master->ops->detach_i3c_dev(dev); 1397 1398 i3c_master_put_i3c_addrs(dev); 1399 list_del(&dev->common.node); 1400 } 1401 1402 static int i3c_master_attach_i2c_dev(struct i3c_master_controller *master, 1403 struct i2c_dev_desc *dev) 1404 { 1405 int ret; 1406 1407 if (master->ops->attach_i2c_dev) { 1408 ret = master->ops->attach_i2c_dev(dev); 1409 if (ret) 1410 return ret; 1411 } 1412 1413 list_add_tail(&dev->common.node, &master->bus.devs.i2c); 1414 1415 return 0; 1416 } 1417 1418 static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev) 1419 { 1420 struct i3c_master_controller *master = i2c_dev_get_master(dev); 1421 1422 list_del(&dev->common.node); 1423 1424 if (master->ops->detach_i2c_dev) 1425 master->ops->detach_i2c_dev(dev); 1426 } 1427 1428 static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev) 1429 { 1430 struct i3c_master_controller *master = i3c_dev_get_master(dev); 1431 int ret; 1432 1433 if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr || 1434 !dev->boardinfo->static_addr) 1435 return; 1436 1437 ret = i3c_master_setdasa_locked(master, dev->info.static_addr, 1438 dev->boardinfo->init_dyn_addr); 1439 if (ret) 1440 return; 1441 1442 dev->info.dyn_addr = dev->boardinfo->init_dyn_addr; 1443 ret = i3c_master_reattach_i3c_dev(dev, 0); 1444 if (ret) 1445 goto err_rstdaa; 1446 1447 ret = i3c_master_retrieve_dev_info(dev); 1448 if (ret) 1449 goto err_rstdaa; 1450 1451 return; 1452 1453 err_rstdaa: 1454 i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr); 1455 } 1456 1457 static void 1458 i3c_master_register_new_i3c_devs(struct i3c_master_controller *master) 1459 { 1460 struct i3c_dev_desc *desc; 1461 int ret; 1462 1463 if (!master->init_done) 1464 return; 1465 1466 i3c_bus_for_each_i3cdev(&master->bus, desc) { 1467 if (desc->dev || !desc->info.dyn_addr || desc == master->this) 1468 continue; 1469 1470 desc->dev = kzalloc(sizeof(*desc->dev), GFP_KERNEL); 1471 if (!desc->dev) 1472 continue; 1473 1474 desc->dev->bus = &master->bus; 1475 desc->dev->desc = desc; 1476 desc->dev->dev.parent = &master->dev; 1477 desc->dev->dev.type = &i3c_device_type; 1478 desc->dev->dev.bus = &i3c_bus_type; 1479 desc->dev->dev.release = i3c_device_release; 1480 dev_set_name(&desc->dev->dev, "%d-%llx", master->bus.id, 1481 desc->info.pid); 1482 1483 if (desc->boardinfo) 1484 desc->dev->dev.of_node = desc->boardinfo->of_node; 1485 1486 ret = device_register(&desc->dev->dev); 1487 if (ret) 1488 dev_err(&master->dev, 1489 "Failed to add I3C device (err = %d)\n", ret); 1490 } 1491 } 1492 1493 /** 1494 * i3c_master_do_daa() - do a DAA (Dynamic Address Assignment) 1495 * @master: master doing the DAA 1496 * 1497 * This function is instantiating an I3C device object and adding it to the 1498 * I3C device list. All device information are automatically retrieved using 1499 * standard CCC commands. 1500 * 1501 * The I3C device object is returned in case the master wants to attach 1502 * private data to it using i3c_dev_set_master_data(). 1503 * 1504 * This function must be called with the bus lock held in write mode. 1505 * 1506 * Return: a 0 in case of success, an negative error code otherwise. 1507 */ 1508 int i3c_master_do_daa(struct i3c_master_controller *master) 1509 { 1510 int ret; 1511 1512 i3c_bus_maintenance_lock(&master->bus); 1513 ret = master->ops->do_daa(master); 1514 i3c_bus_maintenance_unlock(&master->bus); 1515 1516 if (ret) 1517 return ret; 1518 1519 i3c_bus_normaluse_lock(&master->bus); 1520 i3c_master_register_new_i3c_devs(master); 1521 i3c_bus_normaluse_unlock(&master->bus); 1522 1523 return 0; 1524 } 1525 EXPORT_SYMBOL_GPL(i3c_master_do_daa); 1526 1527 /** 1528 * i3c_master_set_info() - set master device information 1529 * @master: master used to send frames on the bus 1530 * @info: I3C device information 1531 * 1532 * Set master device info. This should be called from 1533 * &i3c_master_controller_ops->bus_init(). 1534 * 1535 * Not all &i3c_device_info fields are meaningful for a master device. 1536 * Here is a list of fields that should be properly filled: 1537 * 1538 * - &i3c_device_info->dyn_addr 1539 * - &i3c_device_info->bcr 1540 * - &i3c_device_info->dcr 1541 * - &i3c_device_info->pid 1542 * - &i3c_device_info->hdr_cap if %I3C_BCR_HDR_CAP bit is set in 1543 * &i3c_device_info->bcr 1544 * 1545 * This function must be called with the bus lock held in maintenance mode. 1546 * 1547 * Return: 0 if @info contains valid information (not every piece of 1548 * information can be checked, but we can at least make sure @info->dyn_addr 1549 * and @info->bcr are correct), -EINVAL otherwise. 1550 */ 1551 int i3c_master_set_info(struct i3c_master_controller *master, 1552 const struct i3c_device_info *info) 1553 { 1554 struct i3c_dev_desc *i3cdev; 1555 int ret; 1556 1557 if (!i3c_bus_dev_addr_is_avail(&master->bus, info->dyn_addr)) 1558 return -EINVAL; 1559 1560 if (I3C_BCR_DEVICE_ROLE(info->bcr) == I3C_BCR_I3C_MASTER && 1561 master->secondary) 1562 return -EINVAL; 1563 1564 if (master->this) 1565 return -EINVAL; 1566 1567 i3cdev = i3c_master_alloc_i3c_dev(master, info); 1568 if (IS_ERR(i3cdev)) 1569 return PTR_ERR(i3cdev); 1570 1571 master->this = i3cdev; 1572 master->bus.cur_master = master->this; 1573 1574 ret = i3c_master_attach_i3c_dev(master, i3cdev); 1575 if (ret) 1576 goto err_free_dev; 1577 1578 return 0; 1579 1580 err_free_dev: 1581 i3c_master_free_i3c_dev(i3cdev); 1582 1583 return ret; 1584 } 1585 EXPORT_SYMBOL_GPL(i3c_master_set_info); 1586 1587 static void i3c_master_detach_free_devs(struct i3c_master_controller *master) 1588 { 1589 struct i3c_dev_desc *i3cdev, *i3ctmp; 1590 struct i2c_dev_desc *i2cdev, *i2ctmp; 1591 1592 list_for_each_entry_safe(i3cdev, i3ctmp, &master->bus.devs.i3c, 1593 common.node) { 1594 i3c_master_detach_i3c_dev(i3cdev); 1595 1596 if (i3cdev->boardinfo && i3cdev->boardinfo->init_dyn_addr) 1597 i3c_bus_set_addr_slot_status(&master->bus, 1598 i3cdev->boardinfo->init_dyn_addr, 1599 I3C_ADDR_SLOT_FREE); 1600 1601 i3c_master_free_i3c_dev(i3cdev); 1602 } 1603 1604 list_for_each_entry_safe(i2cdev, i2ctmp, &master->bus.devs.i2c, 1605 common.node) { 1606 i3c_master_detach_i2c_dev(i2cdev); 1607 i3c_bus_set_addr_slot_status(&master->bus, 1608 i2cdev->boardinfo->base.addr, 1609 I3C_ADDR_SLOT_FREE); 1610 i3c_master_free_i2c_dev(i2cdev); 1611 } 1612 } 1613 1614 /** 1615 * i3c_master_bus_init() - initialize an I3C bus 1616 * @master: main master initializing the bus 1617 * 1618 * This function is following all initialisation steps described in the I3C 1619 * specification: 1620 * 1621 * 1. Attach I2C and statically defined I3C devs to the master so that the 1622 * master can fill its internal device table appropriately 1623 * 1624 * 2. Call &i3c_master_controller_ops->bus_init() method to initialize 1625 * the master controller. That's usually where the bus mode is selected 1626 * (pure bus or mixed fast/slow bus) 1627 * 1628 * 3. Instruct all devices on the bus to drop their dynamic address. This is 1629 * particularly important when the bus was previously configured by someone 1630 * else (for example the bootloader) 1631 * 1632 * 4. Disable all slave events. 1633 * 1634 * 5. Pre-assign dynamic addresses requested by the FW with SETDASA for I3C 1635 * devices that have a static address 1636 * 1637 * 6. Do a DAA (Dynamic Address Assignment) to assign dynamic addresses to all 1638 * remaining I3C devices 1639 * 1640 * Once this is done, all I3C and I2C devices should be usable. 1641 * 1642 * Return: a 0 in case of success, an negative error code otherwise. 1643 */ 1644 static int i3c_master_bus_init(struct i3c_master_controller *master) 1645 { 1646 enum i3c_addr_slot_status status; 1647 struct i2c_dev_boardinfo *i2cboardinfo; 1648 struct i3c_dev_boardinfo *i3cboardinfo; 1649 struct i3c_dev_desc *i3cdev; 1650 struct i2c_dev_desc *i2cdev; 1651 int ret; 1652 1653 /* 1654 * First attach all devices with static definitions provided by the 1655 * FW. 1656 */ 1657 list_for_each_entry(i2cboardinfo, &master->boardinfo.i2c, node) { 1658 status = i3c_bus_get_addr_slot_status(&master->bus, 1659 i2cboardinfo->base.addr); 1660 if (status != I3C_ADDR_SLOT_FREE) { 1661 ret = -EBUSY; 1662 goto err_detach_devs; 1663 } 1664 1665 i3c_bus_set_addr_slot_status(&master->bus, 1666 i2cboardinfo->base.addr, 1667 I3C_ADDR_SLOT_I2C_DEV); 1668 1669 i2cdev = i3c_master_alloc_i2c_dev(master, i2cboardinfo); 1670 if (IS_ERR(i2cdev)) { 1671 ret = PTR_ERR(i2cdev); 1672 goto err_detach_devs; 1673 } 1674 1675 ret = i3c_master_attach_i2c_dev(master, i2cdev); 1676 if (ret) { 1677 i3c_master_free_i2c_dev(i2cdev); 1678 goto err_detach_devs; 1679 } 1680 } 1681 list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) { 1682 struct i3c_device_info info = { 1683 .static_addr = i3cboardinfo->static_addr, 1684 }; 1685 1686 if (i3cboardinfo->init_dyn_addr) { 1687 status = i3c_bus_get_addr_slot_status(&master->bus, 1688 i3cboardinfo->init_dyn_addr); 1689 if (status != I3C_ADDR_SLOT_FREE) { 1690 ret = -EBUSY; 1691 goto err_detach_devs; 1692 } 1693 } 1694 1695 i3cdev = i3c_master_alloc_i3c_dev(master, &info); 1696 if (IS_ERR(i3cdev)) { 1697 ret = PTR_ERR(i3cdev); 1698 goto err_detach_devs; 1699 } 1700 1701 i3cdev->boardinfo = i3cboardinfo; 1702 1703 ret = i3c_master_attach_i3c_dev(master, i3cdev); 1704 if (ret) { 1705 i3c_master_free_i3c_dev(i3cdev); 1706 goto err_detach_devs; 1707 } 1708 } 1709 1710 /* 1711 * Now execute the controller specific ->bus_init() routine, which 1712 * might configure its internal logic to match the bus limitations. 1713 */ 1714 ret = master->ops->bus_init(master); 1715 if (ret) 1716 goto err_detach_devs; 1717 1718 /* 1719 * The master device should have been instantiated in ->bus_init(), 1720 * complain if this was not the case. 1721 */ 1722 if (!master->this) { 1723 dev_err(&master->dev, 1724 "master_set_info() was not called in ->bus_init()\n"); 1725 ret = -EINVAL; 1726 goto err_bus_cleanup; 1727 } 1728 1729 /* 1730 * Reset all dynamic address that may have been assigned before 1731 * (assigned by the bootloader for example). 1732 */ 1733 ret = i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR); 1734 if (ret && ret != I3C_ERROR_M2) 1735 goto err_bus_cleanup; 1736 1737 /* Disable all slave events before starting DAA. */ 1738 ret = i3c_master_disec_locked(master, I3C_BROADCAST_ADDR, 1739 I3C_CCC_EVENT_SIR | I3C_CCC_EVENT_MR | 1740 I3C_CCC_EVENT_HJ); 1741 if (ret && ret != I3C_ERROR_M2) 1742 goto err_bus_cleanup; 1743 1744 /* 1745 * Pre-assign dynamic address and retrieve device information if 1746 * needed. 1747 */ 1748 i3c_bus_for_each_i3cdev(&master->bus, i3cdev) 1749 i3c_master_pre_assign_dyn_addr(i3cdev); 1750 1751 ret = i3c_master_do_daa(master); 1752 if (ret) 1753 goto err_rstdaa; 1754 1755 return 0; 1756 1757 err_rstdaa: 1758 i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR); 1759 1760 err_bus_cleanup: 1761 if (master->ops->bus_cleanup) 1762 master->ops->bus_cleanup(master); 1763 1764 err_detach_devs: 1765 i3c_master_detach_free_devs(master); 1766 1767 return ret; 1768 } 1769 1770 static void i3c_master_bus_cleanup(struct i3c_master_controller *master) 1771 { 1772 if (master->ops->bus_cleanup) 1773 master->ops->bus_cleanup(master); 1774 1775 i3c_master_detach_free_devs(master); 1776 } 1777 1778 static struct i3c_dev_desc * 1779 i3c_master_search_i3c_dev_duplicate(struct i3c_dev_desc *refdev) 1780 { 1781 struct i3c_master_controller *master = refdev->common.master; 1782 struct i3c_dev_desc *i3cdev; 1783 1784 i3c_bus_for_each_i3cdev(&master->bus, i3cdev) { 1785 if (i3cdev != refdev && i3cdev->info.pid == refdev->info.pid) 1786 return i3cdev; 1787 } 1788 1789 return NULL; 1790 } 1791 1792 /** 1793 * i3c_master_add_i3c_dev_locked() - add an I3C slave to the bus 1794 * @master: master used to send frames on the bus 1795 * @addr: I3C slave dynamic address assigned to the device 1796 * 1797 * This function is instantiating an I3C device object and adding it to the 1798 * I3C device list. All device information are automatically retrieved using 1799 * standard CCC commands. 1800 * 1801 * The I3C device object is returned in case the master wants to attach 1802 * private data to it using i3c_dev_set_master_data(). 1803 * 1804 * This function must be called with the bus lock held in write mode. 1805 * 1806 * Return: a 0 in case of success, an negative error code otherwise. 1807 */ 1808 int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master, 1809 u8 addr) 1810 { 1811 struct i3c_device_info info = { .dyn_addr = addr }; 1812 struct i3c_dev_desc *newdev, *olddev; 1813 u8 old_dyn_addr = addr, expected_dyn_addr; 1814 struct i3c_ibi_setup ibireq = { }; 1815 bool enable_ibi = false; 1816 int ret; 1817 1818 if (!master) 1819 return -EINVAL; 1820 1821 newdev = i3c_master_alloc_i3c_dev(master, &info); 1822 if (IS_ERR(newdev)) 1823 return PTR_ERR(newdev); 1824 1825 ret = i3c_master_attach_i3c_dev(master, newdev); 1826 if (ret) 1827 goto err_free_dev; 1828 1829 ret = i3c_master_retrieve_dev_info(newdev); 1830 if (ret) 1831 goto err_detach_dev; 1832 1833 olddev = i3c_master_search_i3c_dev_duplicate(newdev); 1834 if (olddev) { 1835 newdev->boardinfo = olddev->boardinfo; 1836 newdev->info.static_addr = olddev->info.static_addr; 1837 newdev->dev = olddev->dev; 1838 if (newdev->dev) 1839 newdev->dev->desc = newdev; 1840 1841 /* 1842 * We need to restore the IBI state too, so let's save the 1843 * IBI information and try to restore them after olddev has 1844 * been detached+released and its IBI has been stopped and 1845 * the associated resources have been freed. 1846 */ 1847 mutex_lock(&olddev->ibi_lock); 1848 if (olddev->ibi) { 1849 ibireq.handler = olddev->ibi->handler; 1850 ibireq.max_payload_len = olddev->ibi->max_payload_len; 1851 ibireq.num_slots = olddev->ibi->num_slots; 1852 1853 if (olddev->ibi->enabled) { 1854 enable_ibi = true; 1855 i3c_dev_disable_ibi_locked(olddev); 1856 } 1857 1858 i3c_dev_free_ibi_locked(olddev); 1859 } 1860 mutex_unlock(&olddev->ibi_lock); 1861 1862 old_dyn_addr = olddev->info.dyn_addr; 1863 1864 i3c_master_detach_i3c_dev(olddev); 1865 i3c_master_free_i3c_dev(olddev); 1866 } 1867 1868 ret = i3c_master_reattach_i3c_dev(newdev, old_dyn_addr); 1869 if (ret) 1870 goto err_detach_dev; 1871 1872 /* 1873 * Depending on our previous state, the expected dynamic address might 1874 * differ: 1875 * - if the device already had a dynamic address assigned, let's try to 1876 * re-apply this one 1877 * - if the device did not have a dynamic address and the firmware 1878 * requested a specific address, pick this one 1879 * - in any other case, keep the address automatically assigned by the 1880 * master 1881 */ 1882 if (old_dyn_addr && old_dyn_addr != newdev->info.dyn_addr) 1883 expected_dyn_addr = old_dyn_addr; 1884 else if (newdev->boardinfo && newdev->boardinfo->init_dyn_addr) 1885 expected_dyn_addr = newdev->boardinfo->init_dyn_addr; 1886 else 1887 expected_dyn_addr = newdev->info.dyn_addr; 1888 1889 if (newdev->info.dyn_addr != expected_dyn_addr) { 1890 /* 1891 * Try to apply the expected dynamic address. If it fails, keep 1892 * the address assigned by the master. 1893 */ 1894 ret = i3c_master_setnewda_locked(master, 1895 newdev->info.dyn_addr, 1896 expected_dyn_addr); 1897 if (!ret) { 1898 old_dyn_addr = newdev->info.dyn_addr; 1899 newdev->info.dyn_addr = expected_dyn_addr; 1900 i3c_master_reattach_i3c_dev(newdev, old_dyn_addr); 1901 } else { 1902 dev_err(&master->dev, 1903 "Failed to assign reserved/old address to device %d%llx", 1904 master->bus.id, newdev->info.pid); 1905 } 1906 } 1907 1908 /* 1909 * Now is time to try to restore the IBI setup. If we're lucky, 1910 * everything works as before, otherwise, all we can do is complain. 1911 * FIXME: maybe we should add callback to inform the driver that it 1912 * should request the IBI again instead of trying to hide that from 1913 * him. 1914 */ 1915 if (ibireq.handler) { 1916 mutex_lock(&newdev->ibi_lock); 1917 ret = i3c_dev_request_ibi_locked(newdev, &ibireq); 1918 if (ret) { 1919 dev_err(&master->dev, 1920 "Failed to request IBI on device %d-%llx", 1921 master->bus.id, newdev->info.pid); 1922 } else if (enable_ibi) { 1923 ret = i3c_dev_enable_ibi_locked(newdev); 1924 if (ret) 1925 dev_err(&master->dev, 1926 "Failed to re-enable IBI on device %d-%llx", 1927 master->bus.id, newdev->info.pid); 1928 } 1929 mutex_unlock(&newdev->ibi_lock); 1930 } 1931 1932 return 0; 1933 1934 err_detach_dev: 1935 if (newdev->dev && newdev->dev->desc) 1936 newdev->dev->desc = NULL; 1937 1938 i3c_master_detach_i3c_dev(newdev); 1939 1940 err_free_dev: 1941 i3c_master_free_i3c_dev(newdev); 1942 1943 return ret; 1944 } 1945 EXPORT_SYMBOL_GPL(i3c_master_add_i3c_dev_locked); 1946 1947 #define OF_I3C_REG1_IS_I2C_DEV BIT(31) 1948 1949 static int 1950 of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master, 1951 struct device_node *node, u32 *reg) 1952 { 1953 struct i2c_dev_boardinfo *boardinfo; 1954 struct device *dev = &master->dev; 1955 int ret; 1956 1957 boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL); 1958 if (!boardinfo) 1959 return -ENOMEM; 1960 1961 ret = of_i2c_get_board_info(dev, node, &boardinfo->base); 1962 if (ret) 1963 return ret; 1964 1965 /* LVR is encoded in reg[2]. */ 1966 boardinfo->lvr = reg[2]; 1967 1968 if (boardinfo->lvr & I3C_LVR_I2C_FM_MODE) 1969 master->bus.scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE; 1970 1971 list_add_tail(&boardinfo->node, &master->boardinfo.i2c); 1972 of_node_get(node); 1973 1974 return 0; 1975 } 1976 1977 static int 1978 of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master, 1979 struct device_node *node, u32 *reg) 1980 { 1981 struct i3c_dev_boardinfo *boardinfo; 1982 struct device *dev = &master->dev; 1983 enum i3c_addr_slot_status addrstatus; 1984 u32 init_dyn_addr = 0; 1985 1986 boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL); 1987 if (!boardinfo) 1988 return -ENOMEM; 1989 1990 if (reg[0]) { 1991 if (reg[0] > I3C_MAX_ADDR) 1992 return -EINVAL; 1993 1994 addrstatus = i3c_bus_get_addr_slot_status(&master->bus, 1995 reg[0]); 1996 if (addrstatus != I3C_ADDR_SLOT_FREE) 1997 return -EINVAL; 1998 } 1999 2000 boardinfo->static_addr = reg[0]; 2001 2002 if (!of_property_read_u32(node, "assigned-address", &init_dyn_addr)) { 2003 if (init_dyn_addr > I3C_MAX_ADDR) 2004 return -EINVAL; 2005 2006 addrstatus = i3c_bus_get_addr_slot_status(&master->bus, 2007 init_dyn_addr); 2008 if (addrstatus != I3C_ADDR_SLOT_FREE) 2009 return -EINVAL; 2010 } 2011 2012 boardinfo->pid = ((u64)reg[1] << 32) | reg[2]; 2013 2014 if ((boardinfo->pid & GENMASK_ULL(63, 48)) || 2015 I3C_PID_RND_LOWER_32BITS(boardinfo->pid)) 2016 return -EINVAL; 2017 2018 boardinfo->init_dyn_addr = init_dyn_addr; 2019 boardinfo->of_node = of_node_get(node); 2020 list_add_tail(&boardinfo->node, &master->boardinfo.i3c); 2021 2022 return 0; 2023 } 2024 2025 static int of_i3c_master_add_dev(struct i3c_master_controller *master, 2026 struct device_node *node) 2027 { 2028 u32 reg[3]; 2029 int ret; 2030 2031 if (!master || !node) 2032 return -EINVAL; 2033 2034 ret = of_property_read_u32_array(node, "reg", reg, ARRAY_SIZE(reg)); 2035 if (ret) 2036 return ret; 2037 2038 /* 2039 * The manufacturer ID can't be 0. If reg[1] == 0 that means we're 2040 * dealing with an I2C device. 2041 */ 2042 if (!reg[1]) 2043 ret = of_i3c_master_add_i2c_boardinfo(master, node, reg); 2044 else 2045 ret = of_i3c_master_add_i3c_boardinfo(master, node, reg); 2046 2047 return ret; 2048 } 2049 2050 static int of_populate_i3c_bus(struct i3c_master_controller *master) 2051 { 2052 struct device *dev = &master->dev; 2053 struct device_node *i3cbus_np = dev->of_node; 2054 struct device_node *node; 2055 int ret; 2056 u32 val; 2057 2058 if (!i3cbus_np) 2059 return 0; 2060 2061 for_each_available_child_of_node(i3cbus_np, node) { 2062 ret = of_i3c_master_add_dev(master, node); 2063 if (ret) 2064 return ret; 2065 } 2066 2067 /* 2068 * The user might want to limit I2C and I3C speed in case some devices 2069 * on the bus are not supporting typical rates, or if the bus topology 2070 * prevents it from using max possible rate. 2071 */ 2072 if (!of_property_read_u32(i3cbus_np, "i2c-scl-hz", &val)) 2073 master->bus.scl_rate.i2c = val; 2074 2075 if (!of_property_read_u32(i3cbus_np, "i3c-scl-hz", &val)) 2076 master->bus.scl_rate.i3c = val; 2077 2078 return 0; 2079 } 2080 2081 static int i3c_master_i2c_adapter_xfer(struct i2c_adapter *adap, 2082 struct i2c_msg *xfers, int nxfers) 2083 { 2084 struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap); 2085 struct i2c_dev_desc *dev; 2086 int i, ret; 2087 u16 addr; 2088 2089 if (!xfers || !master || nxfers <= 0) 2090 return -EINVAL; 2091 2092 if (!master->ops->i2c_xfers) 2093 return -ENOTSUPP; 2094 2095 /* Doing transfers to different devices is not supported. */ 2096 addr = xfers[0].addr; 2097 for (i = 1; i < nxfers; i++) { 2098 if (addr != xfers[i].addr) 2099 return -ENOTSUPP; 2100 } 2101 2102 i3c_bus_normaluse_lock(&master->bus); 2103 dev = i3c_master_find_i2c_dev_by_addr(master, addr); 2104 if (!dev) 2105 ret = -ENOENT; 2106 else 2107 ret = master->ops->i2c_xfers(dev, xfers, nxfers); 2108 i3c_bus_normaluse_unlock(&master->bus); 2109 2110 return ret ? ret : nxfers; 2111 } 2112 2113 static u32 i3c_master_i2c_functionalities(struct i2c_adapter *adap) 2114 { 2115 struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap); 2116 2117 return master->ops->i2c_funcs(master); 2118 } 2119 2120 static const struct i2c_algorithm i3c_master_i2c_algo = { 2121 .master_xfer = i3c_master_i2c_adapter_xfer, 2122 .functionality = i3c_master_i2c_functionalities, 2123 }; 2124 2125 static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master) 2126 { 2127 struct i2c_adapter *adap = i3c_master_to_i2c_adapter(master); 2128 struct i2c_dev_desc *i2cdev; 2129 int ret; 2130 2131 adap->dev.parent = master->dev.parent; 2132 adap->owner = master->dev.parent->driver->owner; 2133 adap->algo = &i3c_master_i2c_algo; 2134 strncpy(adap->name, dev_name(master->dev.parent), sizeof(adap->name)); 2135 2136 /* FIXME: Should we allow i3c masters to override these values? */ 2137 adap->timeout = 1000; 2138 adap->retries = 3; 2139 2140 ret = i2c_add_adapter(adap); 2141 if (ret) 2142 return ret; 2143 2144 /* 2145 * We silently ignore failures here. The bus should keep working 2146 * correctly even if one or more i2c devices are not registered. 2147 */ 2148 i3c_bus_for_each_i2cdev(&master->bus, i2cdev) 2149 i2cdev->dev = i2c_new_device(adap, &i2cdev->boardinfo->base); 2150 2151 return 0; 2152 } 2153 2154 static void i3c_master_i2c_adapter_cleanup(struct i3c_master_controller *master) 2155 { 2156 struct i2c_dev_desc *i2cdev; 2157 2158 i2c_del_adapter(&master->i2c); 2159 2160 i3c_bus_for_each_i2cdev(&master->bus, i2cdev) 2161 i2cdev->dev = NULL; 2162 } 2163 2164 static void i3c_master_unregister_i3c_devs(struct i3c_master_controller *master) 2165 { 2166 struct i3c_dev_desc *i3cdev; 2167 2168 i3c_bus_for_each_i3cdev(&master->bus, i3cdev) { 2169 if (!i3cdev->dev) 2170 continue; 2171 2172 i3cdev->dev->desc = NULL; 2173 if (device_is_registered(&i3cdev->dev->dev)) 2174 device_unregister(&i3cdev->dev->dev); 2175 else 2176 put_device(&i3cdev->dev->dev); 2177 i3cdev->dev = NULL; 2178 } 2179 } 2180 2181 /** 2182 * i3c_master_queue_ibi() - Queue an IBI 2183 * @dev: the device this IBI is coming from 2184 * @slot: the IBI slot used to store the payload 2185 * 2186 * Queue an IBI to the controller workqueue. The IBI handler attached to 2187 * the dev will be called from a workqueue context. 2188 */ 2189 void i3c_master_queue_ibi(struct i3c_dev_desc *dev, struct i3c_ibi_slot *slot) 2190 { 2191 atomic_inc(&dev->ibi->pending_ibis); 2192 queue_work(dev->common.master->wq, &slot->work); 2193 } 2194 EXPORT_SYMBOL_GPL(i3c_master_queue_ibi); 2195 2196 static void i3c_master_handle_ibi(struct work_struct *work) 2197 { 2198 struct i3c_ibi_slot *slot = container_of(work, struct i3c_ibi_slot, 2199 work); 2200 struct i3c_dev_desc *dev = slot->dev; 2201 struct i3c_master_controller *master = i3c_dev_get_master(dev); 2202 struct i3c_ibi_payload payload; 2203 2204 payload.data = slot->data; 2205 payload.len = slot->len; 2206 2207 if (dev->dev) 2208 dev->ibi->handler(dev->dev, &payload); 2209 2210 master->ops->recycle_ibi_slot(dev, slot); 2211 if (atomic_dec_and_test(&dev->ibi->pending_ibis)) 2212 complete(&dev->ibi->all_ibis_handled); 2213 } 2214 2215 static void i3c_master_init_ibi_slot(struct i3c_dev_desc *dev, 2216 struct i3c_ibi_slot *slot) 2217 { 2218 slot->dev = dev; 2219 INIT_WORK(&slot->work, i3c_master_handle_ibi); 2220 } 2221 2222 struct i3c_generic_ibi_slot { 2223 struct list_head node; 2224 struct i3c_ibi_slot base; 2225 }; 2226 2227 struct i3c_generic_ibi_pool { 2228 spinlock_t lock; 2229 unsigned int num_slots; 2230 struct i3c_generic_ibi_slot *slots; 2231 void *payload_buf; 2232 struct list_head free_slots; 2233 struct list_head pending; 2234 }; 2235 2236 /** 2237 * i3c_generic_ibi_free_pool() - Free a generic IBI pool 2238 * @pool: the IBI pool to free 2239 * 2240 * Free all IBI slots allated by a generic IBI pool. 2241 */ 2242 void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool) 2243 { 2244 struct i3c_generic_ibi_slot *slot; 2245 unsigned int nslots = 0; 2246 2247 while (!list_empty(&pool->free_slots)) { 2248 slot = list_first_entry(&pool->free_slots, 2249 struct i3c_generic_ibi_slot, node); 2250 list_del(&slot->node); 2251 nslots++; 2252 } 2253 2254 /* 2255 * If the number of freed slots is not equal to the number of allocated 2256 * slots we have a leak somewhere. 2257 */ 2258 WARN_ON(nslots != pool->num_slots); 2259 2260 kfree(pool->payload_buf); 2261 kfree(pool->slots); 2262 kfree(pool); 2263 } 2264 EXPORT_SYMBOL_GPL(i3c_generic_ibi_free_pool); 2265 2266 /** 2267 * i3c_generic_ibi_alloc_pool() - Create a generic IBI pool 2268 * @dev: the device this pool will be used for 2269 * @req: IBI setup request describing what the device driver expects 2270 * 2271 * Create a generic IBI pool based on the information provided in @req. 2272 * 2273 * Return: a valid IBI pool in case of success, an ERR_PTR() otherwise. 2274 */ 2275 struct i3c_generic_ibi_pool * 2276 i3c_generic_ibi_alloc_pool(struct i3c_dev_desc *dev, 2277 const struct i3c_ibi_setup *req) 2278 { 2279 struct i3c_generic_ibi_pool *pool; 2280 struct i3c_generic_ibi_slot *slot; 2281 unsigned int i; 2282 int ret; 2283 2284 pool = kzalloc(sizeof(*pool), GFP_KERNEL); 2285 if (!pool) 2286 return ERR_PTR(-ENOMEM); 2287 2288 spin_lock_init(&pool->lock); 2289 INIT_LIST_HEAD(&pool->free_slots); 2290 INIT_LIST_HEAD(&pool->pending); 2291 2292 pool->slots = kcalloc(req->num_slots, sizeof(*slot), GFP_KERNEL); 2293 if (!pool->slots) { 2294 ret = -ENOMEM; 2295 goto err_free_pool; 2296 } 2297 2298 if (req->max_payload_len) { 2299 pool->payload_buf = kcalloc(req->num_slots, 2300 req->max_payload_len, GFP_KERNEL); 2301 if (!pool->payload_buf) { 2302 ret = -ENOMEM; 2303 goto err_free_pool; 2304 } 2305 } 2306 2307 for (i = 0; i < req->num_slots; i++) { 2308 slot = &pool->slots[i]; 2309 i3c_master_init_ibi_slot(dev, &slot->base); 2310 2311 if (req->max_payload_len) 2312 slot->base.data = pool->payload_buf + 2313 (i * req->max_payload_len); 2314 2315 list_add_tail(&slot->node, &pool->free_slots); 2316 pool->num_slots++; 2317 } 2318 2319 return pool; 2320 2321 err_free_pool: 2322 i3c_generic_ibi_free_pool(pool); 2323 return ERR_PTR(ret); 2324 } 2325 EXPORT_SYMBOL_GPL(i3c_generic_ibi_alloc_pool); 2326 2327 /** 2328 * i3c_generic_ibi_get_free_slot() - Get a free slot from a generic IBI pool 2329 * @pool: the pool to query an IBI slot on 2330 * 2331 * Search for a free slot in a generic IBI pool. 2332 * The slot should be returned to the pool using i3c_generic_ibi_recycle_slot() 2333 * when it's no longer needed. 2334 * 2335 * Return: a pointer to a free slot, or NULL if there's no free slot available. 2336 */ 2337 struct i3c_ibi_slot * 2338 i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool) 2339 { 2340 struct i3c_generic_ibi_slot *slot; 2341 unsigned long flags; 2342 2343 spin_lock_irqsave(&pool->lock, flags); 2344 slot = list_first_entry_or_null(&pool->free_slots, 2345 struct i3c_generic_ibi_slot, node); 2346 if (slot) 2347 list_del(&slot->node); 2348 spin_unlock_irqrestore(&pool->lock, flags); 2349 2350 return slot ? &slot->base : NULL; 2351 } 2352 EXPORT_SYMBOL_GPL(i3c_generic_ibi_get_free_slot); 2353 2354 /** 2355 * i3c_generic_ibi_recycle_slot() - Return a slot to a generic IBI pool 2356 * @pool: the pool to return the IBI slot to 2357 * @s: IBI slot to recycle 2358 * 2359 * Add an IBI slot back to its generic IBI pool. Should be called from the 2360 * master driver struct_master_controller_ops->recycle_ibi() method. 2361 */ 2362 void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool, 2363 struct i3c_ibi_slot *s) 2364 { 2365 struct i3c_generic_ibi_slot *slot; 2366 unsigned long flags; 2367 2368 if (!s) 2369 return; 2370 2371 slot = container_of(s, struct i3c_generic_ibi_slot, base); 2372 spin_lock_irqsave(&pool->lock, flags); 2373 list_add_tail(&slot->node, &pool->free_slots); 2374 spin_unlock_irqrestore(&pool->lock, flags); 2375 } 2376 EXPORT_SYMBOL_GPL(i3c_generic_ibi_recycle_slot); 2377 2378 static int i3c_master_check_ops(const struct i3c_master_controller_ops *ops) 2379 { 2380 if (!ops || !ops->bus_init || !ops->priv_xfers || 2381 !ops->send_ccc_cmd || !ops->do_daa || !ops->i2c_xfers || 2382 !ops->i2c_funcs) 2383 return -EINVAL; 2384 2385 if (ops->request_ibi && 2386 (!ops->enable_ibi || !ops->disable_ibi || !ops->free_ibi || 2387 !ops->recycle_ibi_slot)) 2388 return -EINVAL; 2389 2390 return 0; 2391 } 2392 2393 /** 2394 * i3c_master_register() - register an I3C master 2395 * @master: master used to send frames on the bus 2396 * @parent: the parent device (the one that provides this I3C master 2397 * controller) 2398 * @ops: the master controller operations 2399 * @secondary: true if you are registering a secondary master. Will return 2400 * -ENOTSUPP if set to true since secondary masters are not yet 2401 * supported 2402 * 2403 * This function takes care of everything for you: 2404 * 2405 * - creates and initializes the I3C bus 2406 * - populates the bus with static I2C devs if @parent->of_node is not 2407 * NULL 2408 * - registers all I3C devices added by the controller during bus 2409 * initialization 2410 * - registers the I2C adapter and all I2C devices 2411 * 2412 * Return: 0 in case of success, a negative error code otherwise. 2413 */ 2414 int i3c_master_register(struct i3c_master_controller *master, 2415 struct device *parent, 2416 const struct i3c_master_controller_ops *ops, 2417 bool secondary) 2418 { 2419 struct i3c_bus *i3cbus = i3c_master_get_bus(master); 2420 enum i3c_bus_mode mode = I3C_BUS_MODE_PURE; 2421 struct i2c_dev_boardinfo *i2cbi; 2422 int ret; 2423 2424 /* We do not support secondary masters yet. */ 2425 if (secondary) 2426 return -ENOTSUPP; 2427 2428 ret = i3c_master_check_ops(ops); 2429 if (ret) 2430 return ret; 2431 2432 master->dev.parent = parent; 2433 master->dev.of_node = of_node_get(parent->of_node); 2434 master->dev.bus = &i3c_bus_type; 2435 master->dev.type = &i3c_masterdev_type; 2436 master->dev.release = i3c_masterdev_release; 2437 master->ops = ops; 2438 master->secondary = secondary; 2439 INIT_LIST_HEAD(&master->boardinfo.i2c); 2440 INIT_LIST_HEAD(&master->boardinfo.i3c); 2441 2442 ret = i3c_bus_init(i3cbus); 2443 if (ret) 2444 return ret; 2445 2446 device_initialize(&master->dev); 2447 dev_set_name(&master->dev, "i3c-%d", i3cbus->id); 2448 2449 ret = of_populate_i3c_bus(master); 2450 if (ret) 2451 goto err_put_dev; 2452 2453 list_for_each_entry(i2cbi, &master->boardinfo.i2c, node) { 2454 switch (i2cbi->lvr & I3C_LVR_I2C_INDEX_MASK) { 2455 case I3C_LVR_I2C_INDEX(0): 2456 if (mode < I3C_BUS_MODE_MIXED_FAST) 2457 mode = I3C_BUS_MODE_MIXED_FAST; 2458 break; 2459 case I3C_LVR_I2C_INDEX(1): 2460 case I3C_LVR_I2C_INDEX(2): 2461 if (mode < I3C_BUS_MODE_MIXED_SLOW) 2462 mode = I3C_BUS_MODE_MIXED_SLOW; 2463 break; 2464 default: 2465 ret = -EINVAL; 2466 goto err_put_dev; 2467 } 2468 } 2469 2470 ret = i3c_bus_set_mode(i3cbus, mode); 2471 if (ret) 2472 goto err_put_dev; 2473 2474 master->wq = alloc_workqueue("%s", 0, 0, dev_name(parent)); 2475 if (!master->wq) { 2476 ret = -ENOMEM; 2477 goto err_put_dev; 2478 } 2479 2480 ret = i3c_master_bus_init(master); 2481 if (ret) 2482 goto err_put_dev; 2483 2484 ret = device_add(&master->dev); 2485 if (ret) 2486 goto err_cleanup_bus; 2487 2488 /* 2489 * Expose our I3C bus as an I2C adapter so that I2C devices are exposed 2490 * through the I2C subsystem. 2491 */ 2492 ret = i3c_master_i2c_adapter_init(master); 2493 if (ret) 2494 goto err_del_dev; 2495 2496 /* 2497 * We're done initializing the bus and the controller, we can now 2498 * register I3C devices dicovered during the initial DAA. 2499 */ 2500 master->init_done = true; 2501 i3c_bus_normaluse_lock(&master->bus); 2502 i3c_master_register_new_i3c_devs(master); 2503 i3c_bus_normaluse_unlock(&master->bus); 2504 2505 return 0; 2506 2507 err_del_dev: 2508 device_del(&master->dev); 2509 2510 err_cleanup_bus: 2511 i3c_master_bus_cleanup(master); 2512 2513 err_put_dev: 2514 put_device(&master->dev); 2515 2516 return ret; 2517 } 2518 EXPORT_SYMBOL_GPL(i3c_master_register); 2519 2520 /** 2521 * i3c_master_unregister() - unregister an I3C master 2522 * @master: master used to send frames on the bus 2523 * 2524 * Basically undo everything done in i3c_master_register(). 2525 * 2526 * Return: 0 in case of success, a negative error code otherwise. 2527 */ 2528 int i3c_master_unregister(struct i3c_master_controller *master) 2529 { 2530 i3c_master_i2c_adapter_cleanup(master); 2531 i3c_master_unregister_i3c_devs(master); 2532 i3c_master_bus_cleanup(master); 2533 device_unregister(&master->dev); 2534 2535 return 0; 2536 } 2537 EXPORT_SYMBOL_GPL(i3c_master_unregister); 2538 2539 int i3c_dev_do_priv_xfers_locked(struct i3c_dev_desc *dev, 2540 struct i3c_priv_xfer *xfers, 2541 int nxfers) 2542 { 2543 struct i3c_master_controller *master; 2544 2545 if (!dev) 2546 return -ENOENT; 2547 2548 master = i3c_dev_get_master(dev); 2549 if (!master || !xfers) 2550 return -EINVAL; 2551 2552 if (!master->ops->priv_xfers) 2553 return -ENOTSUPP; 2554 2555 return master->ops->priv_xfers(dev, xfers, nxfers); 2556 } 2557 2558 int i3c_dev_disable_ibi_locked(struct i3c_dev_desc *dev) 2559 { 2560 struct i3c_master_controller *master; 2561 int ret; 2562 2563 if (!dev->ibi) 2564 return -EINVAL; 2565 2566 master = i3c_dev_get_master(dev); 2567 ret = master->ops->disable_ibi(dev); 2568 if (ret) 2569 return ret; 2570 2571 reinit_completion(&dev->ibi->all_ibis_handled); 2572 if (atomic_read(&dev->ibi->pending_ibis)) 2573 wait_for_completion(&dev->ibi->all_ibis_handled); 2574 2575 dev->ibi->enabled = false; 2576 2577 return 0; 2578 } 2579 2580 int i3c_dev_enable_ibi_locked(struct i3c_dev_desc *dev) 2581 { 2582 struct i3c_master_controller *master = i3c_dev_get_master(dev); 2583 int ret; 2584 2585 if (!dev->ibi) 2586 return -EINVAL; 2587 2588 ret = master->ops->enable_ibi(dev); 2589 if (!ret) 2590 dev->ibi->enabled = true; 2591 2592 return ret; 2593 } 2594 2595 int i3c_dev_request_ibi_locked(struct i3c_dev_desc *dev, 2596 const struct i3c_ibi_setup *req) 2597 { 2598 struct i3c_master_controller *master = i3c_dev_get_master(dev); 2599 struct i3c_device_ibi_info *ibi; 2600 int ret; 2601 2602 if (!master->ops->request_ibi) 2603 return -ENOTSUPP; 2604 2605 if (dev->ibi) 2606 return -EBUSY; 2607 2608 ibi = kzalloc(sizeof(*ibi), GFP_KERNEL); 2609 if (!ibi) 2610 return -ENOMEM; 2611 2612 atomic_set(&ibi->pending_ibis, 0); 2613 init_completion(&ibi->all_ibis_handled); 2614 ibi->handler = req->handler; 2615 ibi->max_payload_len = req->max_payload_len; 2616 ibi->num_slots = req->num_slots; 2617 2618 dev->ibi = ibi; 2619 ret = master->ops->request_ibi(dev, req); 2620 if (ret) { 2621 kfree(ibi); 2622 dev->ibi = NULL; 2623 } 2624 2625 return ret; 2626 } 2627 2628 void i3c_dev_free_ibi_locked(struct i3c_dev_desc *dev) 2629 { 2630 struct i3c_master_controller *master = i3c_dev_get_master(dev); 2631 2632 if (!dev->ibi) 2633 return; 2634 2635 if (WARN_ON(dev->ibi->enabled)) 2636 WARN_ON(i3c_dev_disable_ibi_locked(dev)); 2637 2638 master->ops->free_ibi(dev); 2639 kfree(dev->ibi); 2640 dev->ibi = NULL; 2641 } 2642 2643 static int __init i3c_init(void) 2644 { 2645 return bus_register(&i3c_bus_type); 2646 } 2647 subsys_initcall(i3c_init); 2648 2649 static void __exit i3c_exit(void) 2650 { 2651 idr_destroy(&i3c_bus_idr); 2652 bus_unregister(&i3c_bus_type); 2653 } 2654 module_exit(i3c_exit); 2655 2656 MODULE_AUTHOR("Boris Brezillon <boris.brezillon@bootlin.com>"); 2657 MODULE_DESCRIPTION("I3C core"); 2658 MODULE_LICENSE("GPL v2"); 2659