1 /*
2  * SuperH Mobile I2C Controller
3  *
4  * Copyright (C) 2014 Wolfram Sang <wsa@sang-engineering.com>
5  *
6  * Copyright (C) 2008 Magnus Damm
7  *
8  * Portions of the code based on out-of-tree driver i2c-sh7343.c
9  * Copyright (c) 2006 Carlos Munoz <carlos@kenati.com>
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  */
20 
21 #include <linux/clk.h>
22 #include <linux/delay.h>
23 #include <linux/dmaengine.h>
24 #include <linux/dma-mapping.h>
25 #include <linux/err.h>
26 #include <linux/i2c.h>
27 #include <linux/i2c/i2c-sh_mobile.h>
28 #include <linux/init.h>
29 #include <linux/interrupt.h>
30 #include <linux/io.h>
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/of_device.h>
34 #include <linux/platform_device.h>
35 #include <linux/pm_runtime.h>
36 #include <linux/slab.h>
37 
38 /* Transmit operation:                                                      */
39 /*                                                                          */
40 /* 0 byte transmit                                                          */
41 /* BUS:     S     A8     ACK   P(*)                                         */
42 /* IRQ:       DTE   WAIT                                                    */
43 /* ICIC:                                                                    */
44 /* ICCR: 0x94 0x90                                                          */
45 /* ICDR:      A8                                                            */
46 /*                                                                          */
47 /* 1 byte transmit                                                          */
48 /* BUS:     S     A8     ACK   D8(1)   ACK   P(*)                           */
49 /* IRQ:       DTE   WAIT         WAIT                                       */
50 /* ICIC:      -DTE                                                          */
51 /* ICCR: 0x94       0x90                                                    */
52 /* ICDR:      A8    D8(1)                                                   */
53 /*                                                                          */
54 /* 2 byte transmit                                                          */
55 /* BUS:     S     A8     ACK   D8(1)   ACK   D8(2)   ACK   P(*)             */
56 /* IRQ:       DTE   WAIT         WAIT          WAIT                         */
57 /* ICIC:      -DTE                                                          */
58 /* ICCR: 0x94                    0x90                                       */
59 /* ICDR:      A8    D8(1)        D8(2)                                      */
60 /*                                                                          */
61 /* 3 bytes or more, +---------+ gets repeated                               */
62 /*                                                                          */
63 /*                                                                          */
64 /* Receive operation:                                                       */
65 /*                                                                          */
66 /* 0 byte receive - not supported since slave may hold SDA low              */
67 /*                                                                          */
68 /* 1 byte receive       [TX] | [RX]                                         */
69 /* BUS:     S     A8     ACK | D8(1)   ACK   P(*)                           */
70 /* IRQ:       DTE   WAIT     |   WAIT     DTE                               */
71 /* ICIC:      -DTE           |   +DTE                                       */
72 /* ICCR: 0x94       0x81     |   0xc0                                       */
73 /* ICDR:      A8             |            D8(1)                             */
74 /*                                                                          */
75 /* 2 byte receive        [TX]| [RX]                                         */
76 /* BUS:     S     A8     ACK | D8(1)   ACK   D8(2)   ACK   P(*)             */
77 /* IRQ:       DTE   WAIT     |   WAIT          WAIT     DTE                 */
78 /* ICIC:      -DTE           |                 +DTE                         */
79 /* ICCR: 0x94       0x81     |                 0xc0                         */
80 /* ICDR:      A8             |                 D8(1)    D8(2)               */
81 /*                                                                          */
82 /* 3 byte receive       [TX] | [RX]                                     (*) */
83 /* BUS:     S     A8     ACK | D8(1)   ACK   D8(2)   ACK   D8(3)   ACK    P */
84 /* IRQ:       DTE   WAIT     |   WAIT          WAIT         WAIT      DTE   */
85 /* ICIC:      -DTE           |                              +DTE            */
86 /* ICCR: 0x94       0x81     |                              0xc0            */
87 /* ICDR:      A8             |                 D8(1)        D8(2)     D8(3) */
88 /*                                                                          */
89 /* 4 bytes or more, this part is repeated    +---------+                    */
90 /*                                                                          */
91 /*                                                                          */
92 /* Interrupt order and BUSY flag                                            */
93 /*     ___                                                 _                */
94 /* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/                 */
95 /* SCL      \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/                   */
96 /*                                                                          */
97 /*        S   D7  D6  D5  D4  D3  D2  D1  D0              P(*)              */
98 /*                                           ___                            */
99 /* WAIT IRQ ________________________________/   \___________                */
100 /* TACK IRQ ____________________________________/   \_______                */
101 /* DTE  IRQ __________________________________________/   \_                */
102 /* AL   IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX                */
103 /*         _______________________________________________                  */
104 /* BUSY __/                                               \_                */
105 /*                                                                          */
106 /* (*) The STOP condition is only sent by the master at the end of the last */
107 /* I2C message or if the I2C_M_STOP flag is set. Similarly, the BUSY bit is */
108 /* only cleared after the STOP condition, so, between messages we have to   */
109 /* poll for the DTE bit.                                                    */
110 /*                                                                          */
111 
112 enum sh_mobile_i2c_op {
113 	OP_START = 0,
114 	OP_TX_FIRST,
115 	OP_TX,
116 	OP_TX_STOP,
117 	OP_TX_STOP_DATA,
118 	OP_TX_TO_RX,
119 	OP_RX,
120 	OP_RX_STOP,
121 	OP_RX_STOP_DATA,
122 };
123 
124 struct sh_mobile_i2c_data {
125 	struct device *dev;
126 	void __iomem *reg;
127 	struct i2c_adapter adap;
128 	unsigned long bus_speed;
129 	unsigned int clks_per_count;
130 	struct clk *clk;
131 	u_int8_t icic;
132 	u_int8_t flags;
133 	u_int16_t iccl;
134 	u_int16_t icch;
135 
136 	spinlock_t lock;
137 	wait_queue_head_t wait;
138 	struct i2c_msg *msg;
139 	int pos;
140 	int sr;
141 	bool send_stop;
142 	bool stop_after_dma;
143 
144 	struct resource *res;
145 	struct dma_chan *dma_tx;
146 	struct dma_chan *dma_rx;
147 	struct scatterlist sg;
148 	enum dma_data_direction dma_direction;
149 };
150 
151 struct sh_mobile_dt_config {
152 	int clks_per_count;
153 	void (*setup)(struct sh_mobile_i2c_data *pd);
154 };
155 
156 #define IIC_FLAG_HAS_ICIC67	(1 << 0)
157 
158 #define STANDARD_MODE		100000
159 #define FAST_MODE		400000
160 
161 /* Register offsets */
162 #define ICDR			0x00
163 #define ICCR			0x04
164 #define ICSR			0x08
165 #define ICIC			0x0c
166 #define ICCL			0x10
167 #define ICCH			0x14
168 #define ICSTART			0x70
169 
170 /* Register bits */
171 #define ICCR_ICE		0x80
172 #define ICCR_RACK		0x40
173 #define ICCR_TRS		0x10
174 #define ICCR_BBSY		0x04
175 #define ICCR_SCP		0x01
176 
177 #define ICSR_SCLM		0x80
178 #define ICSR_SDAM		0x40
179 #define SW_DONE			0x20
180 #define ICSR_BUSY		0x10
181 #define ICSR_AL			0x08
182 #define ICSR_TACK		0x04
183 #define ICSR_WAIT		0x02
184 #define ICSR_DTE		0x01
185 
186 #define ICIC_ICCLB8		0x80
187 #define ICIC_ICCHB8		0x40
188 #define ICIC_TDMAE		0x20
189 #define ICIC_RDMAE		0x10
190 #define ICIC_ALE		0x08
191 #define ICIC_TACKE		0x04
192 #define ICIC_WAITE		0x02
193 #define ICIC_DTEE		0x01
194 
195 #define ICSTART_ICSTART		0x10
196 
197 static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data)
198 {
199 	if (offs == ICIC)
200 		data |= pd->icic;
201 
202 	iowrite8(data, pd->reg + offs);
203 }
204 
205 static unsigned char iic_rd(struct sh_mobile_i2c_data *pd, int offs)
206 {
207 	return ioread8(pd->reg + offs);
208 }
209 
210 static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs,
211 			unsigned char set, unsigned char clr)
212 {
213 	iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr);
214 }
215 
216 static u32 sh_mobile_i2c_iccl(unsigned long count_khz, u32 tLOW, u32 tf)
217 {
218 	/*
219 	 * Conditional expression:
220 	 *   ICCL >= COUNT_CLK * (tLOW + tf)
221 	 *
222 	 * SH-Mobile IIC hardware starts counting the LOW period of
223 	 * the SCL signal (tLOW) as soon as it pulls the SCL line.
224 	 * In order to meet the tLOW timing spec, we need to take into
225 	 * account the fall time of SCL signal (tf).  Default tf value
226 	 * should be 0.3 us, for safety.
227 	 */
228 	return (((count_khz * (tLOW + tf)) + 5000) / 10000);
229 }
230 
231 static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf)
232 {
233 	/*
234 	 * Conditional expression:
235 	 *   ICCH >= COUNT_CLK * (tHIGH + tf)
236 	 *
237 	 * SH-Mobile IIC hardware is aware of SCL transition period 'tr',
238 	 * and can ignore it.  SH-Mobile IIC controller starts counting
239 	 * the HIGH period of the SCL signal (tHIGH) after the SCL input
240 	 * voltage increases at VIH.
241 	 *
242 	 * Afterward it turned out calculating ICCH using only tHIGH spec
243 	 * will result in violation of the tHD;STA timing spec.  We need
244 	 * to take into account the fall time of SDA signal (tf) at START
245 	 * condition, in order to meet both tHIGH and tHD;STA specs.
246 	 */
247 	return (((count_khz * (tHIGH + tf)) + 5000) / 10000);
248 }
249 
250 static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
251 {
252 	unsigned long i2c_clk_khz;
253 	u32 tHIGH, tLOW, tf;
254 	uint16_t max_val;
255 
256 	/* Get clock rate after clock is enabled */
257 	clk_prepare_enable(pd->clk);
258 	i2c_clk_khz = clk_get_rate(pd->clk) / 1000;
259 	clk_disable_unprepare(pd->clk);
260 	i2c_clk_khz /= pd->clks_per_count;
261 
262 	if (pd->bus_speed == STANDARD_MODE) {
263 		tLOW	= 47;	/* tLOW = 4.7 us */
264 		tHIGH	= 40;	/* tHD;STA = tHIGH = 4.0 us */
265 		tf	= 3;	/* tf = 0.3 us */
266 	} else if (pd->bus_speed == FAST_MODE) {
267 		tLOW	= 13;	/* tLOW = 1.3 us */
268 		tHIGH	= 6;	/* tHD;STA = tHIGH = 0.6 us */
269 		tf	= 3;	/* tf = 0.3 us */
270 	} else {
271 		dev_err(pd->dev, "unrecognized bus speed %lu Hz\n",
272 			pd->bus_speed);
273 		return -EINVAL;
274 	}
275 
276 	pd->iccl = sh_mobile_i2c_iccl(i2c_clk_khz, tLOW, tf);
277 	pd->icch = sh_mobile_i2c_icch(i2c_clk_khz, tHIGH, tf);
278 
279 	max_val = pd->flags & IIC_FLAG_HAS_ICIC67 ? 0x1ff : 0xff;
280 	if (pd->iccl > max_val || pd->icch > max_val) {
281 		dev_err(pd->dev, "timing values out of range: L/H=0x%x/0x%x\n",
282 			pd->iccl, pd->icch);
283 		return -EINVAL;
284 	}
285 
286 	/* one more bit of ICCL in ICIC */
287 	if (pd->iccl & 0x100)
288 		pd->icic |= ICIC_ICCLB8;
289 	else
290 		pd->icic &= ~ICIC_ICCLB8;
291 
292 	/* one more bit of ICCH in ICIC */
293 	if (pd->icch & 0x100)
294 		pd->icic |= ICIC_ICCHB8;
295 	else
296 		pd->icic &= ~ICIC_ICCHB8;
297 
298 	dev_dbg(pd->dev, "timing values: L/H=0x%x/0x%x\n", pd->iccl, pd->icch);
299 	return 0;
300 }
301 
302 static void activate_ch(struct sh_mobile_i2c_data *pd)
303 {
304 	/* Wake up device and enable clock */
305 	pm_runtime_get_sync(pd->dev);
306 	clk_prepare_enable(pd->clk);
307 
308 	/* Enable channel and configure rx ack */
309 	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
310 
311 	/* Mask all interrupts */
312 	iic_wr(pd, ICIC, 0);
313 
314 	/* Set the clock */
315 	iic_wr(pd, ICCL, pd->iccl & 0xff);
316 	iic_wr(pd, ICCH, pd->icch & 0xff);
317 }
318 
319 static void deactivate_ch(struct sh_mobile_i2c_data *pd)
320 {
321 	/* Clear/disable interrupts */
322 	iic_wr(pd, ICSR, 0);
323 	iic_wr(pd, ICIC, 0);
324 
325 	/* Disable channel */
326 	iic_set_clr(pd, ICCR, 0, ICCR_ICE);
327 
328 	/* Disable clock and mark device as idle */
329 	clk_disable_unprepare(pd->clk);
330 	pm_runtime_put_sync(pd->dev);
331 }
332 
333 static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
334 			    enum sh_mobile_i2c_op op, unsigned char data)
335 {
336 	unsigned char ret = 0;
337 	unsigned long flags;
338 
339 	dev_dbg(pd->dev, "op %d, data in 0x%02x\n", op, data);
340 
341 	spin_lock_irqsave(&pd->lock, flags);
342 
343 	switch (op) {
344 	case OP_START: /* issue start and trigger DTE interrupt */
345 		iic_wr(pd, ICCR, ICCR_ICE | ICCR_TRS | ICCR_BBSY);
346 		break;
347 	case OP_TX_FIRST: /* disable DTE interrupt and write data */
348 		iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
349 		iic_wr(pd, ICDR, data);
350 		break;
351 	case OP_TX: /* write data */
352 		iic_wr(pd, ICDR, data);
353 		break;
354 	case OP_TX_STOP_DATA: /* write data and issue a stop afterwards */
355 		iic_wr(pd, ICDR, data);
356 		/* fallthrough */
357 	case OP_TX_STOP: /* issue a stop */
358 		iic_wr(pd, ICCR, pd->send_stop ? ICCR_ICE | ICCR_TRS
359 					       : ICCR_ICE | ICCR_TRS | ICCR_BBSY);
360 		break;
361 	case OP_TX_TO_RX: /* select read mode */
362 		iic_wr(pd, ICCR, ICCR_ICE | ICCR_SCP);
363 		break;
364 	case OP_RX: /* just read data */
365 		ret = iic_rd(pd, ICDR);
366 		break;
367 	case OP_RX_STOP: /* enable DTE interrupt, issue stop */
368 		iic_wr(pd, ICIC,
369 		       ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
370 		iic_wr(pd, ICCR, ICCR_ICE | ICCR_RACK);
371 		break;
372 	case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
373 		iic_wr(pd, ICIC,
374 		       ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
375 		ret = iic_rd(pd, ICDR);
376 		iic_wr(pd, ICCR, ICCR_ICE | ICCR_RACK);
377 		break;
378 	}
379 
380 	spin_unlock_irqrestore(&pd->lock, flags);
381 
382 	dev_dbg(pd->dev, "op %d, data out 0x%02x\n", op, ret);
383 	return ret;
384 }
385 
386 static bool sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
387 {
388 	return pd->pos == -1;
389 }
390 
391 static bool sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
392 {
393 	return pd->pos == pd->msg->len - 1;
394 }
395 
396 static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
397 				   unsigned char *buf)
398 {
399 	switch (pd->pos) {
400 	case -1:
401 		*buf = i2c_8bit_addr_from_msg(pd->msg);
402 		break;
403 	default:
404 		*buf = pd->msg->buf[pd->pos];
405 	}
406 }
407 
408 static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
409 {
410 	unsigned char data;
411 
412 	if (pd->pos == pd->msg->len) {
413 		/* Send stop if we haven't yet (DMA case) */
414 		if (pd->send_stop && pd->stop_after_dma)
415 			i2c_op(pd, OP_TX_STOP, 0);
416 		return 1;
417 	}
418 
419 	sh_mobile_i2c_get_data(pd, &data);
420 
421 	if (sh_mobile_i2c_is_last_byte(pd))
422 		i2c_op(pd, OP_TX_STOP_DATA, data);
423 	else if (sh_mobile_i2c_is_first_byte(pd))
424 		i2c_op(pd, OP_TX_FIRST, data);
425 	else
426 		i2c_op(pd, OP_TX, data);
427 
428 	pd->pos++;
429 	return 0;
430 }
431 
432 static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
433 {
434 	unsigned char data;
435 	int real_pos;
436 
437 	do {
438 		if (pd->pos <= -1) {
439 			sh_mobile_i2c_get_data(pd, &data);
440 
441 			if (sh_mobile_i2c_is_first_byte(pd))
442 				i2c_op(pd, OP_TX_FIRST, data);
443 			else
444 				i2c_op(pd, OP_TX, data);
445 			break;
446 		}
447 
448 		if (pd->pos == 0) {
449 			i2c_op(pd, OP_TX_TO_RX, 0);
450 			break;
451 		}
452 
453 		real_pos = pd->pos - 2;
454 
455 		if (pd->pos == pd->msg->len) {
456 			if (pd->stop_after_dma) {
457 				/* Simulate PIO end condition after DMA transfer */
458 				i2c_op(pd, OP_RX_STOP, 0);
459 				pd->pos++;
460 				break;
461 			}
462 
463 			if (real_pos < 0) {
464 				i2c_op(pd, OP_RX_STOP, 0);
465 				break;
466 			}
467 			data = i2c_op(pd, OP_RX_STOP_DATA, 0);
468 		} else
469 			data = i2c_op(pd, OP_RX, 0);
470 
471 		if (real_pos >= 0)
472 			pd->msg->buf[real_pos] = data;
473 	} while (0);
474 
475 	pd->pos++;
476 	return pd->pos == (pd->msg->len + 2);
477 }
478 
479 static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
480 {
481 	struct sh_mobile_i2c_data *pd = dev_id;
482 	unsigned char sr;
483 	int wakeup = 0;
484 
485 	sr = iic_rd(pd, ICSR);
486 	pd->sr |= sr; /* remember state */
487 
488 	dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
489 	       (pd->msg->flags & I2C_M_RD) ? "read" : "write",
490 	       pd->pos, pd->msg->len);
491 
492 	/* Kick off TxDMA after preface was done */
493 	if (pd->dma_direction == DMA_TO_DEVICE && pd->pos == 0)
494 		iic_set_clr(pd, ICIC, ICIC_TDMAE, 0);
495 	else if (sr & (ICSR_AL | ICSR_TACK))
496 		/* don't interrupt transaction - continue to issue stop */
497 		iic_wr(pd, ICSR, sr & ~(ICSR_AL | ICSR_TACK));
498 	else if (pd->msg->flags & I2C_M_RD)
499 		wakeup = sh_mobile_i2c_isr_rx(pd);
500 	else
501 		wakeup = sh_mobile_i2c_isr_tx(pd);
502 
503 	/* Kick off RxDMA after preface was done */
504 	if (pd->dma_direction == DMA_FROM_DEVICE && pd->pos == 1)
505 		iic_set_clr(pd, ICIC, ICIC_RDMAE, 0);
506 
507 	if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
508 		iic_wr(pd, ICSR, sr & ~ICSR_WAIT);
509 
510 	if (wakeup) {
511 		pd->sr |= SW_DONE;
512 		wake_up(&pd->wait);
513 	}
514 
515 	/* defeat write posting to avoid spurious WAIT interrupts */
516 	iic_rd(pd, ICSR);
517 
518 	return IRQ_HANDLED;
519 }
520 
521 static void sh_mobile_i2c_dma_unmap(struct sh_mobile_i2c_data *pd)
522 {
523 	struct dma_chan *chan = pd->dma_direction == DMA_FROM_DEVICE
524 				? pd->dma_rx : pd->dma_tx;
525 
526 	dma_unmap_single(chan->device->dev, sg_dma_address(&pd->sg),
527 			 pd->msg->len, pd->dma_direction);
528 
529 	pd->dma_direction = DMA_NONE;
530 }
531 
532 static void sh_mobile_i2c_cleanup_dma(struct sh_mobile_i2c_data *pd)
533 {
534 	if (pd->dma_direction == DMA_NONE)
535 		return;
536 	else if (pd->dma_direction == DMA_FROM_DEVICE)
537 		dmaengine_terminate_all(pd->dma_rx);
538 	else if (pd->dma_direction == DMA_TO_DEVICE)
539 		dmaengine_terminate_all(pd->dma_tx);
540 
541 	sh_mobile_i2c_dma_unmap(pd);
542 }
543 
544 static void sh_mobile_i2c_dma_callback(void *data)
545 {
546 	struct sh_mobile_i2c_data *pd = data;
547 
548 	sh_mobile_i2c_dma_unmap(pd);
549 	pd->pos = pd->msg->len;
550 	pd->stop_after_dma = true;
551 
552 	iic_set_clr(pd, ICIC, 0, ICIC_TDMAE | ICIC_RDMAE);
553 }
554 
555 static struct dma_chan *sh_mobile_i2c_request_dma_chan(struct device *dev,
556 				enum dma_transfer_direction dir, dma_addr_t port_addr)
557 {
558 	struct dma_chan *chan;
559 	struct dma_slave_config cfg;
560 	char *chan_name = dir == DMA_MEM_TO_DEV ? "tx" : "rx";
561 	int ret;
562 
563 	chan = dma_request_slave_channel_reason(dev, chan_name);
564 	if (IS_ERR(chan)) {
565 		ret = PTR_ERR(chan);
566 		dev_dbg(dev, "request_channel failed for %s (%d)\n", chan_name, ret);
567 		return chan;
568 	}
569 
570 	memset(&cfg, 0, sizeof(cfg));
571 	cfg.direction = dir;
572 	if (dir == DMA_MEM_TO_DEV) {
573 		cfg.dst_addr = port_addr;
574 		cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
575 	} else {
576 		cfg.src_addr = port_addr;
577 		cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
578 	}
579 
580 	ret = dmaengine_slave_config(chan, &cfg);
581 	if (ret) {
582 		dev_dbg(dev, "slave_config failed for %s (%d)\n", chan_name, ret);
583 		dma_release_channel(chan);
584 		return ERR_PTR(ret);
585 	}
586 
587 	dev_dbg(dev, "got DMA channel for %s\n", chan_name);
588 	return chan;
589 }
590 
591 static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
592 {
593 	bool read = pd->msg->flags & I2C_M_RD;
594 	enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
595 	struct dma_chan *chan = read ? pd->dma_rx : pd->dma_tx;
596 	struct dma_async_tx_descriptor *txdesc;
597 	dma_addr_t dma_addr;
598 	dma_cookie_t cookie;
599 
600 	if (PTR_ERR(chan) == -EPROBE_DEFER) {
601 		if (read)
602 			chan = pd->dma_rx = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_DEV_TO_MEM,
603 									   pd->res->start + ICDR);
604 		else
605 			chan = pd->dma_tx = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_MEM_TO_DEV,
606 									   pd->res->start + ICDR);
607 	}
608 
609 	if (IS_ERR(chan))
610 		return;
611 
612 	dma_addr = dma_map_single(chan->device->dev, pd->msg->buf, pd->msg->len, dir);
613 	if (dma_mapping_error(chan->device->dev, dma_addr)) {
614 		dev_dbg(pd->dev, "dma map failed, using PIO\n");
615 		return;
616 	}
617 
618 	sg_dma_len(&pd->sg) = pd->msg->len;
619 	sg_dma_address(&pd->sg) = dma_addr;
620 
621 	pd->dma_direction = dir;
622 
623 	txdesc = dmaengine_prep_slave_sg(chan, &pd->sg, 1,
624 					 read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV,
625 					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
626 	if (!txdesc) {
627 		dev_dbg(pd->dev, "dma prep slave sg failed, using PIO\n");
628 		sh_mobile_i2c_cleanup_dma(pd);
629 		return;
630 	}
631 
632 	txdesc->callback = sh_mobile_i2c_dma_callback;
633 	txdesc->callback_param = pd;
634 
635 	cookie = dmaengine_submit(txdesc);
636 	if (dma_submit_error(cookie)) {
637 		dev_dbg(pd->dev, "submitting dma failed, using PIO\n");
638 		sh_mobile_i2c_cleanup_dma(pd);
639 		return;
640 	}
641 
642 	dma_async_issue_pending(chan);
643 }
644 
645 static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
646 		    bool do_init)
647 {
648 	if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
649 		dev_err(pd->dev, "Unsupported zero length i2c read\n");
650 		return -EOPNOTSUPP;
651 	}
652 
653 	if (do_init) {
654 		/* Initialize channel registers */
655 		iic_set_clr(pd, ICCR, 0, ICCR_ICE);
656 
657 		/* Enable channel and configure rx ack */
658 		iic_set_clr(pd, ICCR, ICCR_ICE, 0);
659 
660 		/* Set the clock */
661 		iic_wr(pd, ICCL, pd->iccl & 0xff);
662 		iic_wr(pd, ICCH, pd->icch & 0xff);
663 	}
664 
665 	pd->msg = usr_msg;
666 	pd->pos = -1;
667 	pd->sr = 0;
668 
669 	if (pd->msg->len > 8)
670 		sh_mobile_i2c_xfer_dma(pd);
671 
672 	/* Enable all interrupts to begin with */
673 	iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
674 	return 0;
675 }
676 
677 static int poll_dte(struct sh_mobile_i2c_data *pd)
678 {
679 	int i;
680 
681 	for (i = 1000; i; i--) {
682 		u_int8_t val = iic_rd(pd, ICSR);
683 
684 		if (val & ICSR_DTE)
685 			break;
686 
687 		if (val & ICSR_TACK)
688 			return -ENXIO;
689 
690 		udelay(10);
691 	}
692 
693 	return i ? 0 : -ETIMEDOUT;
694 }
695 
696 static int poll_busy(struct sh_mobile_i2c_data *pd)
697 {
698 	int i;
699 
700 	for (i = 1000; i; i--) {
701 		u_int8_t val = iic_rd(pd, ICSR);
702 
703 		dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
704 
705 		/* the interrupt handler may wake us up before the
706 		 * transfer is finished, so poll the hardware
707 		 * until we're done.
708 		 */
709 		if (!(val & ICSR_BUSY)) {
710 			/* handle missing acknowledge and arbitration lost */
711 			val |= pd->sr;
712 			if (val & ICSR_TACK)
713 				return -ENXIO;
714 			if (val & ICSR_AL)
715 				return -EAGAIN;
716 			break;
717 		}
718 
719 		udelay(10);
720 	}
721 
722 	return i ? 0 : -ETIMEDOUT;
723 }
724 
725 static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
726 			      struct i2c_msg *msgs,
727 			      int num)
728 {
729 	struct sh_mobile_i2c_data *pd = i2c_get_adapdata(adapter);
730 	struct i2c_msg	*msg;
731 	int err = 0;
732 	int i;
733 	long timeout;
734 
735 	activate_ch(pd);
736 
737 	/* Process all messages */
738 	for (i = 0; i < num; i++) {
739 		bool do_start = pd->send_stop || !i;
740 		msg = &msgs[i];
741 		pd->send_stop = i == num - 1 || msg->flags & I2C_M_STOP;
742 		pd->stop_after_dma = false;
743 
744 		err = start_ch(pd, msg, do_start);
745 		if (err)
746 			break;
747 
748 		if (do_start)
749 			i2c_op(pd, OP_START, 0);
750 
751 		/* The interrupt handler takes care of the rest... */
752 		timeout = wait_event_timeout(pd->wait,
753 				       pd->sr & (ICSR_TACK | SW_DONE),
754 				       adapter->timeout);
755 		if (!timeout) {
756 			dev_err(pd->dev, "Transfer request timed out\n");
757 			if (pd->dma_direction != DMA_NONE)
758 				sh_mobile_i2c_cleanup_dma(pd);
759 
760 			err = -ETIMEDOUT;
761 			break;
762 		}
763 
764 		if (pd->send_stop)
765 			err = poll_busy(pd);
766 		else
767 			err = poll_dte(pd);
768 		if (err < 0)
769 			break;
770 	}
771 
772 	deactivate_ch(pd);
773 
774 	if (!err)
775 		err = num;
776 	return err;
777 }
778 
779 static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter)
780 {
781 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
782 }
783 
784 static struct i2c_algorithm sh_mobile_i2c_algorithm = {
785 	.functionality	= sh_mobile_i2c_func,
786 	.master_xfer	= sh_mobile_i2c_xfer,
787 };
788 
789 /*
790  * r8a7740 chip has lasting errata on I2C I/O pad reset.
791  * this is work-around for it.
792  */
793 static void sh_mobile_i2c_r8a7740_workaround(struct sh_mobile_i2c_data *pd)
794 {
795 	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
796 	iic_rd(pd, ICCR); /* dummy read */
797 
798 	iic_set_clr(pd, ICSTART, ICSTART_ICSTART, 0);
799 	iic_rd(pd, ICSTART); /* dummy read */
800 
801 	udelay(10);
802 
803 	iic_wr(pd, ICCR, ICCR_SCP);
804 	iic_wr(pd, ICSTART, 0);
805 
806 	udelay(10);
807 
808 	iic_wr(pd, ICCR, ICCR_TRS);
809 	udelay(10);
810 	iic_wr(pd, ICCR, 0);
811 	udelay(10);
812 	iic_wr(pd, ICCR, ICCR_TRS);
813 	udelay(10);
814 }
815 
816 static const struct sh_mobile_dt_config default_dt_config = {
817 	.clks_per_count = 1,
818 };
819 
820 static const struct sh_mobile_dt_config fast_clock_dt_config = {
821 	.clks_per_count = 2,
822 };
823 
824 static const struct sh_mobile_dt_config r8a7740_dt_config = {
825 	.clks_per_count = 1,
826 	.setup = sh_mobile_i2c_r8a7740_workaround,
827 };
828 
829 static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
830 	{ .compatible = "renesas,rmobile-iic", .data = &default_dt_config },
831 	{ .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config },
832 	{ .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config },
833 	{ .compatible = "renesas,iic-r8a7790", .data = &fast_clock_dt_config },
834 	{ .compatible = "renesas,iic-r8a7791", .data = &fast_clock_dt_config },
835 	{ .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config },
836 	{ .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config },
837 	{ .compatible = "renesas,iic-r8a7794", .data = &fast_clock_dt_config },
838 	{ .compatible = "renesas,iic-r8a7795", .data = &fast_clock_dt_config },
839 	{ .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config },
840 	{},
841 };
842 MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids);
843 
844 static void sh_mobile_i2c_release_dma(struct sh_mobile_i2c_data *pd)
845 {
846 	if (!IS_ERR(pd->dma_tx)) {
847 		dma_release_channel(pd->dma_tx);
848 		pd->dma_tx = ERR_PTR(-EPROBE_DEFER);
849 	}
850 
851 	if (!IS_ERR(pd->dma_rx)) {
852 		dma_release_channel(pd->dma_rx);
853 		pd->dma_rx = ERR_PTR(-EPROBE_DEFER);
854 	}
855 }
856 
857 static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, struct sh_mobile_i2c_data *pd)
858 {
859 	struct resource *res;
860 	resource_size_t n;
861 	int k = 0, ret;
862 
863 	while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) {
864 		for (n = res->start; n <= res->end; n++) {
865 			ret = devm_request_irq(&dev->dev, n, sh_mobile_i2c_isr,
866 					  0, dev_name(&dev->dev), pd);
867 			if (ret) {
868 				dev_err(&dev->dev, "cannot request IRQ %pa\n", &n);
869 				return ret;
870 			}
871 		}
872 		k++;
873 	}
874 
875 	return k > 0 ? 0 : -ENOENT;
876 }
877 
878 static int sh_mobile_i2c_probe(struct platform_device *dev)
879 {
880 	struct i2c_sh_mobile_platform_data *pdata = dev_get_platdata(&dev->dev);
881 	struct sh_mobile_i2c_data *pd;
882 	struct i2c_adapter *adap;
883 	struct resource *res;
884 	int ret;
885 	u32 bus_speed;
886 
887 	pd = devm_kzalloc(&dev->dev, sizeof(struct sh_mobile_i2c_data), GFP_KERNEL);
888 	if (!pd)
889 		return -ENOMEM;
890 
891 	pd->clk = devm_clk_get(&dev->dev, NULL);
892 	if (IS_ERR(pd->clk)) {
893 		dev_err(&dev->dev, "cannot get clock\n");
894 		return PTR_ERR(pd->clk);
895 	}
896 
897 	ret = sh_mobile_i2c_hook_irqs(dev, pd);
898 	if (ret)
899 		return ret;
900 
901 	pd->dev = &dev->dev;
902 	platform_set_drvdata(dev, pd);
903 
904 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
905 
906 	pd->res = res;
907 	pd->reg = devm_ioremap_resource(&dev->dev, res);
908 	if (IS_ERR(pd->reg))
909 		return PTR_ERR(pd->reg);
910 
911 	/* Use platform data bus speed or STANDARD_MODE */
912 	ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed);
913 	pd->bus_speed = ret ? STANDARD_MODE : bus_speed;
914 
915 	pd->clks_per_count = 1;
916 
917 	if (dev->dev.of_node) {
918 		const struct of_device_id *match;
919 
920 		match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev);
921 		if (match) {
922 			const struct sh_mobile_dt_config *config;
923 
924 			config = match->data;
925 			pd->clks_per_count = config->clks_per_count;
926 
927 			if (config->setup)
928 				config->setup(pd);
929 		}
930 	} else {
931 		if (pdata && pdata->bus_speed)
932 			pd->bus_speed = pdata->bus_speed;
933 		if (pdata && pdata->clks_per_count)
934 			pd->clks_per_count = pdata->clks_per_count;
935 	}
936 
937 	/* The IIC blocks on SH-Mobile ARM processors
938 	 * come with two new bits in ICIC.
939 	 */
940 	if (resource_size(res) > 0x17)
941 		pd->flags |= IIC_FLAG_HAS_ICIC67;
942 
943 	ret = sh_mobile_i2c_init(pd);
944 	if (ret)
945 		return ret;
946 
947 	/* Init DMA */
948 	sg_init_table(&pd->sg, 1);
949 	pd->dma_direction = DMA_NONE;
950 	pd->dma_rx = pd->dma_tx = ERR_PTR(-EPROBE_DEFER);
951 
952 	/* Enable Runtime PM for this device.
953 	 *
954 	 * Also tell the Runtime PM core to ignore children
955 	 * for this device since it is valid for us to suspend
956 	 * this I2C master driver even though the slave devices
957 	 * on the I2C bus may not be suspended.
958 	 *
959 	 * The state of the I2C hardware bus is unaffected by
960 	 * the Runtime PM state.
961 	 */
962 	pm_suspend_ignore_children(&dev->dev, true);
963 	pm_runtime_enable(&dev->dev);
964 
965 	/* setup the private data */
966 	adap = &pd->adap;
967 	i2c_set_adapdata(adap, pd);
968 
969 	adap->owner = THIS_MODULE;
970 	adap->algo = &sh_mobile_i2c_algorithm;
971 	adap->dev.parent = &dev->dev;
972 	adap->retries = 5;
973 	adap->nr = dev->id;
974 	adap->dev.of_node = dev->dev.of_node;
975 
976 	strlcpy(adap->name, dev->name, sizeof(adap->name));
977 
978 	spin_lock_init(&pd->lock);
979 	init_waitqueue_head(&pd->wait);
980 
981 	ret = i2c_add_numbered_adapter(adap);
982 	if (ret < 0) {
983 		sh_mobile_i2c_release_dma(pd);
984 		return ret;
985 	}
986 
987 	dev_info(&dev->dev, "I2C adapter %d, bus speed %lu Hz\n", adap->nr, pd->bus_speed);
988 
989 	return 0;
990 }
991 
992 static int sh_mobile_i2c_remove(struct platform_device *dev)
993 {
994 	struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
995 
996 	i2c_del_adapter(&pd->adap);
997 	sh_mobile_i2c_release_dma(pd);
998 	pm_runtime_disable(&dev->dev);
999 	return 0;
1000 }
1001 
1002 static int sh_mobile_i2c_runtime_nop(struct device *dev)
1003 {
1004 	/* Runtime PM callback shared between ->runtime_suspend()
1005 	 * and ->runtime_resume(). Simply returns success.
1006 	 *
1007 	 * This driver re-initializes all registers after
1008 	 * pm_runtime_get_sync() anyway so there is no need
1009 	 * to save and restore registers here.
1010 	 */
1011 	return 0;
1012 }
1013 
1014 static const struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = {
1015 	.runtime_suspend = sh_mobile_i2c_runtime_nop,
1016 	.runtime_resume = sh_mobile_i2c_runtime_nop,
1017 };
1018 
1019 static struct platform_driver sh_mobile_i2c_driver = {
1020 	.driver		= {
1021 		.name		= "i2c-sh_mobile",
1022 		.pm		= &sh_mobile_i2c_dev_pm_ops,
1023 		.of_match_table = sh_mobile_i2c_dt_ids,
1024 	},
1025 	.probe		= sh_mobile_i2c_probe,
1026 	.remove		= sh_mobile_i2c_remove,
1027 };
1028 
1029 static int __init sh_mobile_i2c_adap_init(void)
1030 {
1031 	return platform_driver_register(&sh_mobile_i2c_driver);
1032 }
1033 subsys_initcall(sh_mobile_i2c_adap_init);
1034 
1035 static void __exit sh_mobile_i2c_adap_exit(void)
1036 {
1037 	platform_driver_unregister(&sh_mobile_i2c_driver);
1038 }
1039 module_exit(sh_mobile_i2c_adap_exit);
1040 
1041 MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
1042 MODULE_AUTHOR("Magnus Damm and Wolfram Sang");
1043 MODULE_LICENSE("GPL v2");
1044 MODULE_ALIAS("platform:i2c-sh_mobile");
1045