1 /* 2 * Renesas RIIC driver 3 * 4 * Copyright (C) 2013 Wolfram Sang <wsa@sang-engineering.com> 5 * Copyright (C) 2013 Renesas Solutions Corp. 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License version 2 as published by 9 * the Free Software Foundation. 10 */ 11 12 /* 13 * This i2c core has a lot of interrupts, namely 8. We use their chaining as 14 * some kind of state machine. 15 * 16 * 1) The main xfer routine kicks off a transmission by putting the start bit 17 * (or repeated start) on the bus and enabling the transmit interrupt (TIE) 18 * since we need to send the slave address + RW bit in every case. 19 * 20 * 2) TIE sends slave address + RW bit and selects how to continue. 21 * 22 * 3a) Write case: We keep utilizing TIE as long as we have data to send. If we 23 * are done, we switch over to the transmission done interrupt (TEIE) and mark 24 * the message as completed (includes sending STOP) there. 25 * 26 * 3b) Read case: We switch over to receive interrupt (RIE). One dummy read is 27 * needed to start clocking, then we keep receiving until we are done. Note 28 * that we use the RDRFS mode all the time, i.e. we ACK/NACK every byte by 29 * writing to the ACKBT bit. I tried using the RDRFS mode only at the end of a 30 * message to create the final NACK as sketched in the datasheet. This caused 31 * some subtle races (when byte n was processed and byte n+1 was already 32 * waiting), though, and I started with the safe approach. 33 * 34 * 4) If we got a NACK somewhere, we flag the error and stop the transmission 35 * via NAKIE. 36 * 37 * Also check the comments in the interrupt routines for some gory details. 38 */ 39 40 #include <linux/clk.h> 41 #include <linux/completion.h> 42 #include <linux/err.h> 43 #include <linux/i2c.h> 44 #include <linux/interrupt.h> 45 #include <linux/io.h> 46 #include <linux/module.h> 47 #include <linux/of.h> 48 #include <linux/platform_device.h> 49 50 #define RIIC_ICCR1 0x00 51 #define RIIC_ICCR2 0x04 52 #define RIIC_ICMR1 0x08 53 #define RIIC_ICMR3 0x10 54 #define RIIC_ICSER 0x18 55 #define RIIC_ICIER 0x1c 56 #define RIIC_ICSR2 0x24 57 #define RIIC_ICBRL 0x34 58 #define RIIC_ICBRH 0x38 59 #define RIIC_ICDRT 0x3c 60 #define RIIC_ICDRR 0x40 61 62 #define ICCR1_ICE 0x80 63 #define ICCR1_IICRST 0x40 64 #define ICCR1_SOWP 0x10 65 66 #define ICCR2_BBSY 0x80 67 #define ICCR2_SP 0x08 68 #define ICCR2_RS 0x04 69 #define ICCR2_ST 0x02 70 71 #define ICMR1_CKS_MASK 0x70 72 #define ICMR1_BCWP 0x08 73 #define ICMR1_CKS(_x) ((((_x) << 4) & ICMR1_CKS_MASK) | ICMR1_BCWP) 74 75 #define ICMR3_RDRFS 0x20 76 #define ICMR3_ACKWP 0x10 77 #define ICMR3_ACKBT 0x08 78 79 #define ICIER_TIE 0x80 80 #define ICIER_TEIE 0x40 81 #define ICIER_RIE 0x20 82 #define ICIER_NAKIE 0x10 83 84 #define ICSR2_NACKF 0x10 85 86 /* ICBRx (@ PCLK 33MHz) */ 87 #define ICBR_RESERVED 0xe0 /* Should be 1 on writes */ 88 #define ICBRL_SP100K (19 | ICBR_RESERVED) 89 #define ICBRH_SP100K (16 | ICBR_RESERVED) 90 #define ICBRL_SP400K (21 | ICBR_RESERVED) 91 #define ICBRH_SP400K (9 | ICBR_RESERVED) 92 93 #define RIIC_INIT_MSG -1 94 95 struct riic_dev { 96 void __iomem *base; 97 u8 *buf; 98 struct i2c_msg *msg; 99 int bytes_left; 100 int err; 101 int is_last; 102 struct completion msg_done; 103 struct i2c_adapter adapter; 104 struct clk *clk; 105 }; 106 107 struct riic_irq_desc { 108 int res_num; 109 irq_handler_t isr; 110 char *name; 111 }; 112 113 static inline void riic_clear_set_bit(struct riic_dev *riic, u8 clear, u8 set, u8 reg) 114 { 115 writeb((readb(riic->base + reg) & ~clear) | set, riic->base + reg); 116 } 117 118 static int riic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) 119 { 120 struct riic_dev *riic = i2c_get_adapdata(adap); 121 unsigned long time_left; 122 int i, ret; 123 u8 start_bit; 124 125 ret = clk_prepare_enable(riic->clk); 126 if (ret) 127 return ret; 128 129 if (readb(riic->base + RIIC_ICCR2) & ICCR2_BBSY) { 130 riic->err = -EBUSY; 131 goto out; 132 } 133 134 reinit_completion(&riic->msg_done); 135 riic->err = 0; 136 137 writeb(0, riic->base + RIIC_ICSR2); 138 139 for (i = 0, start_bit = ICCR2_ST; i < num; i++) { 140 riic->bytes_left = RIIC_INIT_MSG; 141 riic->buf = msgs[i].buf; 142 riic->msg = &msgs[i]; 143 riic->is_last = (i == num - 1); 144 145 writeb(ICIER_NAKIE | ICIER_TIE, riic->base + RIIC_ICIER); 146 147 writeb(start_bit, riic->base + RIIC_ICCR2); 148 149 time_left = wait_for_completion_timeout(&riic->msg_done, riic->adapter.timeout); 150 if (time_left == 0) 151 riic->err = -ETIMEDOUT; 152 153 if (riic->err) 154 break; 155 156 start_bit = ICCR2_RS; 157 } 158 159 out: 160 clk_disable_unprepare(riic->clk); 161 162 return riic->err ?: num; 163 } 164 165 static irqreturn_t riic_tdre_isr(int irq, void *data) 166 { 167 struct riic_dev *riic = data; 168 u8 val; 169 170 if (!riic->bytes_left) 171 return IRQ_NONE; 172 173 if (riic->bytes_left == RIIC_INIT_MSG) { 174 val = !!(riic->msg->flags & I2C_M_RD); 175 if (val) 176 /* On read, switch over to receive interrupt */ 177 riic_clear_set_bit(riic, ICIER_TIE, ICIER_RIE, RIIC_ICIER); 178 else 179 /* On write, initialize length */ 180 riic->bytes_left = riic->msg->len; 181 182 val |= (riic->msg->addr << 1); 183 } else { 184 val = *riic->buf; 185 riic->buf++; 186 riic->bytes_left--; 187 } 188 189 /* 190 * Switch to transmission ended interrupt when done. Do check here 191 * after bytes_left was initialized to support SMBUS_QUICK (new msg has 192 * 0 length then) 193 */ 194 if (riic->bytes_left == 0) 195 riic_clear_set_bit(riic, ICIER_TIE, ICIER_TEIE, RIIC_ICIER); 196 197 /* 198 * This acks the TIE interrupt. We get another TIE immediately if our 199 * value could be moved to the shadow shift register right away. So 200 * this must be after updates to ICIER (where we want to disable TIE)! 201 */ 202 writeb(val, riic->base + RIIC_ICDRT); 203 204 return IRQ_HANDLED; 205 } 206 207 static irqreturn_t riic_tend_isr(int irq, void *data) 208 { 209 struct riic_dev *riic = data; 210 211 if (readb(riic->base + RIIC_ICSR2) & ICSR2_NACKF) { 212 /* We got a NACKIE */ 213 readb(riic->base + RIIC_ICDRR); /* dummy read */ 214 riic->err = -ENXIO; 215 } else if (riic->bytes_left) { 216 return IRQ_NONE; 217 } 218 219 if (riic->is_last || riic->err) 220 writeb(ICCR2_SP, riic->base + RIIC_ICCR2); 221 222 writeb(0, riic->base + RIIC_ICIER); 223 complete(&riic->msg_done); 224 225 return IRQ_HANDLED; 226 } 227 228 static irqreturn_t riic_rdrf_isr(int irq, void *data) 229 { 230 struct riic_dev *riic = data; 231 232 if (!riic->bytes_left) 233 return IRQ_NONE; 234 235 if (riic->bytes_left == RIIC_INIT_MSG) { 236 riic->bytes_left = riic->msg->len; 237 readb(riic->base + RIIC_ICDRR); /* dummy read */ 238 return IRQ_HANDLED; 239 } 240 241 if (riic->bytes_left == 1) { 242 /* STOP must come before we set ACKBT! */ 243 if (riic->is_last) 244 writeb(ICCR2_SP, riic->base + RIIC_ICCR2); 245 246 riic_clear_set_bit(riic, 0, ICMR3_ACKBT, RIIC_ICMR3); 247 248 writeb(0, riic->base + RIIC_ICIER); 249 complete(&riic->msg_done); 250 } else { 251 riic_clear_set_bit(riic, ICMR3_ACKBT, 0, RIIC_ICMR3); 252 } 253 254 /* Reading acks the RIE interrupt */ 255 *riic->buf = readb(riic->base + RIIC_ICDRR); 256 riic->buf++; 257 riic->bytes_left--; 258 259 return IRQ_HANDLED; 260 } 261 262 static u32 riic_func(struct i2c_adapter *adap) 263 { 264 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; 265 } 266 267 static const struct i2c_algorithm riic_algo = { 268 .master_xfer = riic_xfer, 269 .functionality = riic_func, 270 }; 271 272 static int riic_init_hw(struct riic_dev *riic, u32 spd) 273 { 274 int ret; 275 unsigned long rate; 276 277 ret = clk_prepare_enable(riic->clk); 278 if (ret) 279 return ret; 280 281 /* 282 * TODO: Implement formula to calculate the timing values depending on 283 * variable parent clock rate and arbitrary bus speed 284 */ 285 rate = clk_get_rate(riic->clk); 286 if (rate != 33325000) { 287 dev_err(&riic->adapter.dev, 288 "invalid parent clk (%lu). Must be 33325000Hz\n", rate); 289 clk_disable_unprepare(riic->clk); 290 return -EINVAL; 291 } 292 293 /* Changing the order of accessing IICRST and ICE may break things! */ 294 writeb(ICCR1_IICRST | ICCR1_SOWP, riic->base + RIIC_ICCR1); 295 riic_clear_set_bit(riic, 0, ICCR1_ICE, RIIC_ICCR1); 296 297 switch (spd) { 298 case 100000: 299 writeb(ICMR1_CKS(3), riic->base + RIIC_ICMR1); 300 writeb(ICBRH_SP100K, riic->base + RIIC_ICBRH); 301 writeb(ICBRL_SP100K, riic->base + RIIC_ICBRL); 302 break; 303 case 400000: 304 writeb(ICMR1_CKS(1), riic->base + RIIC_ICMR1); 305 writeb(ICBRH_SP400K, riic->base + RIIC_ICBRH); 306 writeb(ICBRL_SP400K, riic->base + RIIC_ICBRL); 307 break; 308 default: 309 dev_err(&riic->adapter.dev, 310 "unsupported bus speed (%dHz). Use 100000 or 400000\n", spd); 311 clk_disable_unprepare(riic->clk); 312 return -EINVAL; 313 } 314 315 writeb(0, riic->base + RIIC_ICSER); 316 writeb(ICMR3_ACKWP | ICMR3_RDRFS, riic->base + RIIC_ICMR3); 317 318 riic_clear_set_bit(riic, ICCR1_IICRST, 0, RIIC_ICCR1); 319 320 clk_disable_unprepare(riic->clk); 321 322 return 0; 323 } 324 325 static struct riic_irq_desc riic_irqs[] = { 326 { .res_num = 0, .isr = riic_tend_isr, .name = "riic-tend" }, 327 { .res_num = 1, .isr = riic_rdrf_isr, .name = "riic-rdrf" }, 328 { .res_num = 2, .isr = riic_tdre_isr, .name = "riic-tdre" }, 329 { .res_num = 5, .isr = riic_tend_isr, .name = "riic-nack" }, 330 }; 331 332 static int riic_i2c_probe(struct platform_device *pdev) 333 { 334 struct device_node *np = pdev->dev.of_node; 335 struct riic_dev *riic; 336 struct i2c_adapter *adap; 337 struct resource *res; 338 u32 bus_rate = 0; 339 int i, ret; 340 341 riic = devm_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL); 342 if (!riic) 343 return -ENOMEM; 344 345 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 346 riic->base = devm_ioremap_resource(&pdev->dev, res); 347 if (IS_ERR(riic->base)) 348 return PTR_ERR(riic->base); 349 350 riic->clk = devm_clk_get(&pdev->dev, NULL); 351 if (IS_ERR(riic->clk)) { 352 dev_err(&pdev->dev, "missing controller clock"); 353 return PTR_ERR(riic->clk); 354 } 355 356 for (i = 0; i < ARRAY_SIZE(riic_irqs); i++) { 357 res = platform_get_resource(pdev, IORESOURCE_IRQ, riic_irqs[i].res_num); 358 if (!res) 359 return -ENODEV; 360 361 ret = devm_request_irq(&pdev->dev, res->start, riic_irqs[i].isr, 362 0, riic_irqs[i].name, riic); 363 if (ret) { 364 dev_err(&pdev->dev, "failed to request irq %s\n", riic_irqs[i].name); 365 return ret; 366 } 367 } 368 369 adap = &riic->adapter; 370 i2c_set_adapdata(adap, riic); 371 strlcpy(adap->name, "Renesas RIIC adapter", sizeof(adap->name)); 372 adap->owner = THIS_MODULE; 373 adap->algo = &riic_algo; 374 adap->dev.parent = &pdev->dev; 375 adap->dev.of_node = pdev->dev.of_node; 376 377 init_completion(&riic->msg_done); 378 379 of_property_read_u32(np, "clock-frequency", &bus_rate); 380 ret = riic_init_hw(riic, bus_rate); 381 if (ret) 382 return ret; 383 384 385 ret = i2c_add_adapter(adap); 386 if (ret) 387 return ret; 388 389 platform_set_drvdata(pdev, riic); 390 391 dev_info(&pdev->dev, "registered with %dHz bus speed\n", bus_rate); 392 return 0; 393 } 394 395 static int riic_i2c_remove(struct platform_device *pdev) 396 { 397 struct riic_dev *riic = platform_get_drvdata(pdev); 398 399 writeb(0, riic->base + RIIC_ICIER); 400 i2c_del_adapter(&riic->adapter); 401 402 return 0; 403 } 404 405 static const struct of_device_id riic_i2c_dt_ids[] = { 406 { .compatible = "renesas,riic-rz" }, 407 { /* Sentinel */ }, 408 }; 409 410 static struct platform_driver riic_i2c_driver = { 411 .probe = riic_i2c_probe, 412 .remove = riic_i2c_remove, 413 .driver = { 414 .name = "i2c-riic", 415 .of_match_table = riic_i2c_dt_ids, 416 }, 417 }; 418 419 module_platform_driver(riic_i2c_driver); 420 421 MODULE_DESCRIPTION("Renesas RIIC adapter"); 422 MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>"); 423 MODULE_LICENSE("GPL v2"); 424 MODULE_DEVICE_TABLE(of, riic_i2c_dt_ids); 425