1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* ------------------------------------------------------------------------ * 3 * i2c-parport.c I2C bus over parallel port * 4 * ------------------------------------------------------------------------ * 5 Copyright (C) 2003-2011 Jean Delvare <jdelvare@suse.de> 6 7 Based on older i2c-philips-par.c driver 8 Copyright (C) 1995-2000 Simon G. Vogl 9 With some changes from: 10 Frodo Looijaard <frodol@dds.nl> 11 Kyösti Mälkki <kmalkki@cc.hut.fi> 12 13 * ------------------------------------------------------------------------ */ 14 15 #define pr_fmt(fmt) "i2c-parport: " fmt 16 17 #include <linux/kernel.h> 18 #include <linux/module.h> 19 #include <linux/init.h> 20 #include <linux/delay.h> 21 #include <linux/parport.h> 22 #include <linux/i2c.h> 23 #include <linux/i2c-algo-bit.h> 24 #include <linux/i2c-smbus.h> 25 #include <linux/slab.h> 26 #include <linux/list.h> 27 #include <linux/mutex.h> 28 29 #define PORT_DATA 0 30 #define PORT_STAT 1 31 #define PORT_CTRL 2 32 33 struct lineop { 34 u8 val; 35 u8 port; 36 u8 inverted; 37 }; 38 39 struct adapter_parm { 40 struct lineop setsda; 41 struct lineop setscl; 42 struct lineop getsda; 43 struct lineop getscl; 44 struct lineop init; 45 unsigned int smbus_alert:1; 46 }; 47 48 static const struct adapter_parm adapter_parm[] = { 49 /* type 0: Philips adapter */ 50 { 51 .setsda = { 0x80, PORT_DATA, 1 }, 52 .setscl = { 0x08, PORT_CTRL, 0 }, 53 .getsda = { 0x80, PORT_STAT, 0 }, 54 .getscl = { 0x08, PORT_STAT, 0 }, 55 }, 56 /* type 1: home brew teletext adapter */ 57 { 58 .setsda = { 0x02, PORT_DATA, 0 }, 59 .setscl = { 0x01, PORT_DATA, 0 }, 60 .getsda = { 0x80, PORT_STAT, 1 }, 61 }, 62 /* type 2: Velleman K8000 adapter */ 63 { 64 .setsda = { 0x02, PORT_CTRL, 1 }, 65 .setscl = { 0x08, PORT_CTRL, 1 }, 66 .getsda = { 0x10, PORT_STAT, 0 }, 67 }, 68 /* type 3: ELV adapter */ 69 { 70 .setsda = { 0x02, PORT_DATA, 1 }, 71 .setscl = { 0x01, PORT_DATA, 1 }, 72 .getsda = { 0x40, PORT_STAT, 1 }, 73 .getscl = { 0x08, PORT_STAT, 1 }, 74 }, 75 /* type 4: ADM1032 evaluation board */ 76 { 77 .setsda = { 0x02, PORT_DATA, 1 }, 78 .setscl = { 0x01, PORT_DATA, 1 }, 79 .getsda = { 0x10, PORT_STAT, 1 }, 80 .init = { 0xf0, PORT_DATA, 0 }, 81 .smbus_alert = 1, 82 }, 83 /* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */ 84 { 85 .setsda = { 0x02, PORT_DATA, 1 }, 86 .setscl = { 0x01, PORT_DATA, 1 }, 87 .getsda = { 0x10, PORT_STAT, 1 }, 88 }, 89 /* type 6: Barco LPT->DVI (K5800236) adapter */ 90 { 91 .setsda = { 0x02, PORT_DATA, 1 }, 92 .setscl = { 0x01, PORT_DATA, 1 }, 93 .getsda = { 0x20, PORT_STAT, 0 }, 94 .getscl = { 0x40, PORT_STAT, 0 }, 95 .init = { 0xfc, PORT_DATA, 0 }, 96 }, 97 /* type 7: One For All JP1 parallel port adapter */ 98 { 99 .setsda = { 0x01, PORT_DATA, 0 }, 100 .setscl = { 0x02, PORT_DATA, 0 }, 101 .getsda = { 0x80, PORT_STAT, 1 }, 102 .init = { 0x04, PORT_DATA, 1 }, 103 }, 104 /* type 8: VCT-jig */ 105 { 106 .setsda = { 0x04, PORT_DATA, 1 }, 107 .setscl = { 0x01, PORT_DATA, 1 }, 108 .getsda = { 0x40, PORT_STAT, 0 }, 109 .getscl = { 0x80, PORT_STAT, 1 }, 110 }, 111 }; 112 113 /* ----- Device list ------------------------------------------------------ */ 114 115 struct i2c_par { 116 struct pardevice *pdev; 117 struct i2c_adapter adapter; 118 struct i2c_algo_bit_data algo_data; 119 struct i2c_smbus_alert_setup alert_data; 120 struct i2c_client *ara; 121 struct list_head node; 122 }; 123 124 static LIST_HEAD(adapter_list); 125 static DEFINE_MUTEX(adapter_list_lock); 126 127 #define MAX_DEVICE 4 128 static int parport[MAX_DEVICE] = {0, -1, -1, -1}; 129 module_param_array(parport, int, NULL, 0); 130 MODULE_PARM_DESC(parport, 131 "List of parallel ports to bind to, by index.\n" 132 " At most " __stringify(MAX_DEVICE) " devices are supported.\n" 133 " Default is one device connected to parport0.\n" 134 ); 135 136 static int type = -1; 137 module_param(type, int, 0); 138 MODULE_PARM_DESC(type, 139 "Type of adapter:\n" 140 " 0 = Philips adapter\n" 141 " 1 = home brew teletext adapter\n" 142 " 2 = Velleman K8000 adapter\n" 143 " 3 = ELV adapter\n" 144 " 4 = ADM1032 evaluation board\n" 145 " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n" 146 " 6 = Barco LPT->DVI (K5800236) adapter\n" 147 " 7 = One For All JP1 parallel port adapter\n" 148 " 8 = VCT-jig\n" 149 ); 150 151 /* ----- Low-level parallel port access ----------------------------------- */ 152 153 static void port_write_data(struct parport *p, unsigned char d) 154 { 155 parport_write_data(p, d); 156 } 157 158 static void port_write_control(struct parport *p, unsigned char d) 159 { 160 parport_write_control(p, d); 161 } 162 163 static unsigned char port_read_data(struct parport *p) 164 { 165 return parport_read_data(p); 166 } 167 168 static unsigned char port_read_status(struct parport *p) 169 { 170 return parport_read_status(p); 171 } 172 173 static unsigned char port_read_control(struct parport *p) 174 { 175 return parport_read_control(p); 176 } 177 178 static void (* const port_write[])(struct parport *, unsigned char) = { 179 port_write_data, 180 NULL, 181 port_write_control, 182 }; 183 184 static unsigned char (* const port_read[])(struct parport *) = { 185 port_read_data, 186 port_read_status, 187 port_read_control, 188 }; 189 190 /* ----- Unified line operation functions --------------------------------- */ 191 192 static inline void line_set(struct parport *data, int state, 193 const struct lineop *op) 194 { 195 u8 oldval = port_read[op->port](data); 196 197 /* Touch only the bit(s) needed */ 198 if ((op->inverted && !state) || (!op->inverted && state)) 199 port_write[op->port](data, oldval | op->val); 200 else 201 port_write[op->port](data, oldval & ~op->val); 202 } 203 204 static inline int line_get(struct parport *data, 205 const struct lineop *op) 206 { 207 u8 oldval = port_read[op->port](data); 208 209 return ((op->inverted && (oldval & op->val) != op->val) 210 || (!op->inverted && (oldval & op->val) == op->val)); 211 } 212 213 /* ----- I2C algorithm call-back functions and structures ----------------- */ 214 215 static void parport_setscl(void *data, int state) 216 { 217 line_set((struct parport *) data, state, &adapter_parm[type].setscl); 218 } 219 220 static void parport_setsda(void *data, int state) 221 { 222 line_set((struct parport *) data, state, &adapter_parm[type].setsda); 223 } 224 225 static int parport_getscl(void *data) 226 { 227 return line_get((struct parport *) data, &adapter_parm[type].getscl); 228 } 229 230 static int parport_getsda(void *data) 231 { 232 return line_get((struct parport *) data, &adapter_parm[type].getsda); 233 } 234 235 /* Encapsulate the functions above in the correct structure. 236 Note that this is only a template, from which the real structures are 237 copied. The attaching code will set getscl to NULL for adapters that 238 cannot read SCL back, and will also make the data field point to 239 the parallel port structure. */ 240 static const struct i2c_algo_bit_data parport_algo_data = { 241 .setsda = parport_setsda, 242 .setscl = parport_setscl, 243 .getsda = parport_getsda, 244 .getscl = parport_getscl, 245 .udelay = 10, /* ~50 kbps */ 246 .timeout = HZ, 247 }; 248 249 /* ----- I2c and parallel port call-back functions and structures --------- */ 250 251 static void i2c_parport_irq(void *data) 252 { 253 struct i2c_par *adapter = data; 254 struct i2c_client *ara = adapter->ara; 255 256 if (ara) { 257 dev_dbg(&ara->dev, "SMBus alert received\n"); 258 i2c_handle_smbus_alert(ara); 259 } else 260 dev_dbg(&adapter->adapter.dev, 261 "SMBus alert received but no ARA client!\n"); 262 } 263 264 static void i2c_parport_attach(struct parport *port) 265 { 266 struct i2c_par *adapter; 267 int i; 268 struct pardev_cb i2c_parport_cb; 269 270 for (i = 0; i < MAX_DEVICE; i++) { 271 if (parport[i] == -1) 272 continue; 273 if (port->number == parport[i]) 274 break; 275 } 276 if (i == MAX_DEVICE) { 277 pr_debug("Not using parport%d.\n", port->number); 278 return; 279 } 280 281 adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL); 282 if (!adapter) 283 return; 284 memset(&i2c_parport_cb, 0, sizeof(i2c_parport_cb)); 285 i2c_parport_cb.flags = PARPORT_FLAG_EXCL; 286 i2c_parport_cb.irq_func = i2c_parport_irq; 287 i2c_parport_cb.private = adapter; 288 289 pr_debug("attaching to %s\n", port->name); 290 parport_disable_irq(port); 291 adapter->pdev = parport_register_dev_model(port, "i2c-parport", 292 &i2c_parport_cb, i); 293 if (!adapter->pdev) { 294 pr_err("Unable to register with parport\n"); 295 goto err_free; 296 } 297 298 /* Fill the rest of the structure */ 299 adapter->adapter.owner = THIS_MODULE; 300 adapter->adapter.class = I2C_CLASS_HWMON; 301 strlcpy(adapter->adapter.name, "Parallel port adapter", 302 sizeof(adapter->adapter.name)); 303 adapter->algo_data = parport_algo_data; 304 /* Slow down if we can't sense SCL */ 305 if (!adapter_parm[type].getscl.val) { 306 adapter->algo_data.getscl = NULL; 307 adapter->algo_data.udelay = 50; /* ~10 kbps */ 308 } 309 adapter->algo_data.data = port; 310 adapter->adapter.algo_data = &adapter->algo_data; 311 adapter->adapter.dev.parent = port->physport->dev; 312 313 if (parport_claim_or_block(adapter->pdev) < 0) { 314 dev_err(&adapter->pdev->dev, 315 "Could not claim parallel port\n"); 316 goto err_unregister; 317 } 318 319 /* Reset hardware to a sane state (SCL and SDA high) */ 320 parport_setsda(port, 1); 321 parport_setscl(port, 1); 322 /* Other init if needed (power on...) */ 323 if (adapter_parm[type].init.val) { 324 line_set(port, 1, &adapter_parm[type].init); 325 /* Give powered devices some time to settle */ 326 msleep(100); 327 } 328 329 if (i2c_bit_add_bus(&adapter->adapter) < 0) { 330 dev_err(&adapter->pdev->dev, "Unable to register with I2C\n"); 331 goto err_unregister; 332 } 333 334 /* Setup SMBus alert if supported */ 335 if (adapter_parm[type].smbus_alert) { 336 struct i2c_client *ara; 337 338 ara = i2c_new_smbus_alert_device(&adapter->adapter, 339 &adapter->alert_data); 340 if (!IS_ERR(ara)) { 341 adapter->ara = ara; 342 parport_enable_irq(port); 343 } else { 344 dev_warn(&adapter->pdev->dev, 345 "Failed to register ARA client\n"); 346 } 347 } 348 349 /* Add the new adapter to the list */ 350 mutex_lock(&adapter_list_lock); 351 list_add_tail(&adapter->node, &adapter_list); 352 mutex_unlock(&adapter_list_lock); 353 return; 354 355 err_unregister: 356 parport_release(adapter->pdev); 357 parport_unregister_device(adapter->pdev); 358 err_free: 359 kfree(adapter); 360 } 361 362 static void i2c_parport_detach(struct parport *port) 363 { 364 struct i2c_par *adapter, *_n; 365 366 /* Walk the list */ 367 mutex_lock(&adapter_list_lock); 368 list_for_each_entry_safe(adapter, _n, &adapter_list, node) { 369 if (adapter->pdev->port == port) { 370 if (adapter->ara) { 371 parport_disable_irq(port); 372 i2c_unregister_device(adapter->ara); 373 } 374 i2c_del_adapter(&adapter->adapter); 375 376 /* Un-init if needed (power off...) */ 377 if (adapter_parm[type].init.val) 378 line_set(port, 0, &adapter_parm[type].init); 379 380 parport_release(adapter->pdev); 381 parport_unregister_device(adapter->pdev); 382 list_del(&adapter->node); 383 kfree(adapter); 384 } 385 } 386 mutex_unlock(&adapter_list_lock); 387 } 388 389 static struct parport_driver i2c_parport_driver = { 390 .name = "i2c-parport", 391 .match_port = i2c_parport_attach, 392 .detach = i2c_parport_detach, 393 .devmodel = true, 394 }; 395 396 /* ----- Module loading, unloading and information ------------------------ */ 397 398 static int __init i2c_parport_init(void) 399 { 400 if (type < 0) { 401 pr_warn("adapter type unspecified\n"); 402 return -ENODEV; 403 } 404 405 if (type >= ARRAY_SIZE(adapter_parm)) { 406 pr_warn("invalid type (%d)\n", type); 407 return -ENODEV; 408 } 409 410 return parport_register_driver(&i2c_parport_driver); 411 } 412 413 static void __exit i2c_parport_exit(void) 414 { 415 parport_unregister_driver(&i2c_parport_driver); 416 } 417 418 MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); 419 MODULE_DESCRIPTION("I2C bus over parallel port"); 420 MODULE_LICENSE("GPL"); 421 422 module_init(i2c_parport_init); 423 module_exit(i2c_parport_exit); 424