xref: /openbmc/linux/drivers/i2c/busses/i2c-owl.c (revision da1d9caf)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Actions Semiconductor Owl SoC's I2C driver
4  *
5  * Copyright (c) 2014 Actions Semi Inc.
6  * Author: David Liu <liuwei@actions-semi.com>
7  *
8  * Copyright (c) 2018 Linaro Ltd.
9  * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
10  */
11 
12 #include <linux/clk.h>
13 #include <linux/delay.h>
14 #include <linux/i2c.h>
15 #include <linux/interrupt.h>
16 #include <linux/io.h>
17 #include <linux/iopoll.h>
18 #include <linux/module.h>
19 #include <linux/of_device.h>
20 
21 /* I2C registers */
22 #define OWL_I2C_REG_CTL		0x0000
23 #define OWL_I2C_REG_CLKDIV	0x0004
24 #define OWL_I2C_REG_STAT	0x0008
25 #define OWL_I2C_REG_ADDR	0x000C
26 #define OWL_I2C_REG_TXDAT	0x0010
27 #define OWL_I2C_REG_RXDAT	0x0014
28 #define OWL_I2C_REG_CMD		0x0018
29 #define OWL_I2C_REG_FIFOCTL	0x001C
30 #define OWL_I2C_REG_FIFOSTAT	0x0020
31 #define OWL_I2C_REG_DATCNT	0x0024
32 #define OWL_I2C_REG_RCNT	0x0028
33 
34 /* I2Cx_CTL Bit Mask */
35 #define OWL_I2C_CTL_RB		BIT(1)
36 #define OWL_I2C_CTL_GBCC(x)	(((x) & 0x3) << 2)
37 #define	OWL_I2C_CTL_GBCC_NONE	OWL_I2C_CTL_GBCC(0)
38 #define	OWL_I2C_CTL_GBCC_START	OWL_I2C_CTL_GBCC(1)
39 #define	OWL_I2C_CTL_GBCC_STOP	OWL_I2C_CTL_GBCC(2)
40 #define	OWL_I2C_CTL_GBCC_RSTART	OWL_I2C_CTL_GBCC(3)
41 #define OWL_I2C_CTL_IRQE	BIT(5)
42 #define OWL_I2C_CTL_EN		BIT(7)
43 #define OWL_I2C_CTL_AE		BIT(8)
44 #define OWL_I2C_CTL_SHSM	BIT(10)
45 
46 #define OWL_I2C_DIV_FACTOR(x)	((x) & 0xff)
47 
48 /* I2Cx_STAT Bit Mask */
49 #define OWL_I2C_STAT_RACK	BIT(0)
50 #define OWL_I2C_STAT_BEB	BIT(1)
51 #define OWL_I2C_STAT_IRQP	BIT(2)
52 #define OWL_I2C_STAT_LAB	BIT(3)
53 #define OWL_I2C_STAT_STPD	BIT(4)
54 #define OWL_I2C_STAT_STAD	BIT(5)
55 #define OWL_I2C_STAT_BBB	BIT(6)
56 #define OWL_I2C_STAT_TCB	BIT(7)
57 #define OWL_I2C_STAT_LBST	BIT(8)
58 #define OWL_I2C_STAT_SAMB	BIT(9)
59 #define OWL_I2C_STAT_SRGC	BIT(10)
60 
61 /* I2Cx_CMD Bit Mask */
62 #define OWL_I2C_CMD_SBE		BIT(0)
63 #define OWL_I2C_CMD_RBE		BIT(4)
64 #define OWL_I2C_CMD_DE		BIT(8)
65 #define OWL_I2C_CMD_NS		BIT(9)
66 #define OWL_I2C_CMD_SE		BIT(10)
67 #define OWL_I2C_CMD_MSS		BIT(11)
68 #define OWL_I2C_CMD_WRS		BIT(12)
69 #define OWL_I2C_CMD_SECL	BIT(15)
70 
71 #define OWL_I2C_CMD_AS(x)	(((x) & 0x7) << 1)
72 #define OWL_I2C_CMD_SAS(x)	(((x) & 0x7) << 5)
73 
74 /* I2Cx_FIFOCTL Bit Mask */
75 #define OWL_I2C_FIFOCTL_NIB	BIT(0)
76 #define OWL_I2C_FIFOCTL_RFR	BIT(1)
77 #define OWL_I2C_FIFOCTL_TFR	BIT(2)
78 
79 /* I2Cc_FIFOSTAT Bit Mask */
80 #define OWL_I2C_FIFOSTAT_CECB	BIT(0)
81 #define OWL_I2C_FIFOSTAT_RNB	BIT(1)
82 #define OWL_I2C_FIFOSTAT_RFE	BIT(2)
83 #define OWL_I2C_FIFOSTAT_TFF	BIT(5)
84 #define OWL_I2C_FIFOSTAT_TFD	GENMASK(23, 16)
85 #define OWL_I2C_FIFOSTAT_RFD	GENMASK(15, 8)
86 
87 /* I2C bus timeout */
88 #define OWL_I2C_TIMEOUT_MS	(4 * 1000)
89 #define OWL_I2C_TIMEOUT		msecs_to_jiffies(OWL_I2C_TIMEOUT_MS)
90 
91 #define OWL_I2C_MAX_RETRIES	50
92 
93 struct owl_i2c_dev {
94 	struct i2c_adapter	adap;
95 	struct i2c_msg		*msg;
96 	struct completion	msg_complete;
97 	struct clk		*clk;
98 	spinlock_t		lock;
99 	void __iomem		*base;
100 	unsigned long		clk_rate;
101 	u32			bus_freq;
102 	u32			msg_ptr;
103 	int			err;
104 };
105 
106 static void owl_i2c_update_reg(void __iomem *reg, unsigned int val, bool state)
107 {
108 	unsigned int regval;
109 
110 	regval = readl(reg);
111 
112 	if (state)
113 		regval |= val;
114 	else
115 		regval &= ~val;
116 
117 	writel(regval, reg);
118 }
119 
120 static void owl_i2c_reset(struct owl_i2c_dev *i2c_dev)
121 {
122 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
123 			   OWL_I2C_CTL_EN, false);
124 	mdelay(1);
125 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
126 			   OWL_I2C_CTL_EN, true);
127 
128 	/* Clear status registers */
129 	writel(0, i2c_dev->base + OWL_I2C_REG_STAT);
130 }
131 
132 static int owl_i2c_reset_fifo(struct owl_i2c_dev *i2c_dev)
133 {
134 	unsigned int val, timeout = 0;
135 
136 	/* Reset FIFO */
137 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOCTL,
138 			   OWL_I2C_FIFOCTL_RFR | OWL_I2C_FIFOCTL_TFR,
139 			   true);
140 
141 	/* Wait 50ms for FIFO reset complete */
142 	do {
143 		val = readl(i2c_dev->base + OWL_I2C_REG_FIFOCTL);
144 		if (!(val & (OWL_I2C_FIFOCTL_RFR | OWL_I2C_FIFOCTL_TFR)))
145 			break;
146 		usleep_range(500, 1000);
147 	} while (timeout++ < OWL_I2C_MAX_RETRIES);
148 
149 	if (timeout > OWL_I2C_MAX_RETRIES) {
150 		dev_err(&i2c_dev->adap.dev, "FIFO reset timeout\n");
151 		return -ETIMEDOUT;
152 	}
153 
154 	return 0;
155 }
156 
157 static void owl_i2c_set_freq(struct owl_i2c_dev *i2c_dev)
158 {
159 	unsigned int val;
160 
161 	val = DIV_ROUND_UP(i2c_dev->clk_rate, i2c_dev->bus_freq * 16);
162 
163 	/* Set clock divider factor */
164 	writel(OWL_I2C_DIV_FACTOR(val), i2c_dev->base + OWL_I2C_REG_CLKDIV);
165 }
166 
167 static void owl_i2c_xfer_data(struct owl_i2c_dev *i2c_dev)
168 {
169 	struct i2c_msg *msg = i2c_dev->msg;
170 	unsigned int stat, fifostat;
171 
172 	i2c_dev->err = 0;
173 
174 	/* Handle NACK from slave */
175 	fifostat = readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT);
176 	if (fifostat & OWL_I2C_FIFOSTAT_RNB) {
177 		i2c_dev->err = -ENXIO;
178 		/* Clear NACK error bit by writing "1" */
179 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOSTAT,
180 				   OWL_I2C_FIFOSTAT_RNB, true);
181 		return;
182 	}
183 
184 	/* Handle bus error */
185 	stat = readl(i2c_dev->base + OWL_I2C_REG_STAT);
186 	if (stat & OWL_I2C_STAT_BEB) {
187 		i2c_dev->err = -EIO;
188 		/* Clear BUS error bit by writing "1" */
189 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_STAT,
190 				   OWL_I2C_STAT_BEB, true);
191 		return;
192 	}
193 
194 	/* Handle FIFO read */
195 	if (msg->flags & I2C_M_RD) {
196 		while ((readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT) &
197 			OWL_I2C_FIFOSTAT_RFE) && i2c_dev->msg_ptr < msg->len) {
198 			msg->buf[i2c_dev->msg_ptr++] = readl(i2c_dev->base +
199 							     OWL_I2C_REG_RXDAT);
200 		}
201 	} else {
202 		/* Handle the remaining bytes which were not sent */
203 		while (!(readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT) &
204 			 OWL_I2C_FIFOSTAT_TFF) && i2c_dev->msg_ptr < msg->len) {
205 			writel(msg->buf[i2c_dev->msg_ptr++],
206 			       i2c_dev->base + OWL_I2C_REG_TXDAT);
207 		}
208 	}
209 }
210 
211 static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
212 {
213 	struct owl_i2c_dev *i2c_dev = _dev;
214 
215 	spin_lock(&i2c_dev->lock);
216 
217 	owl_i2c_xfer_data(i2c_dev);
218 
219 	/* Clear pending interrupts */
220 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_STAT,
221 			   OWL_I2C_STAT_IRQP, true);
222 
223 	complete_all(&i2c_dev->msg_complete);
224 	spin_unlock(&i2c_dev->lock);
225 
226 	return IRQ_HANDLED;
227 }
228 
229 static u32 owl_i2c_func(struct i2c_adapter *adap)
230 {
231 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
232 }
233 
234 static int owl_i2c_check_bus_busy(struct i2c_adapter *adap)
235 {
236 	struct owl_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
237 	unsigned long timeout;
238 
239 	/* Check for Bus busy */
240 	timeout = jiffies + OWL_I2C_TIMEOUT;
241 	while (readl(i2c_dev->base + OWL_I2C_REG_STAT) & OWL_I2C_STAT_BBB) {
242 		if (time_after(jiffies, timeout)) {
243 			dev_err(&adap->dev, "Bus busy timeout\n");
244 			return -ETIMEDOUT;
245 		}
246 	}
247 
248 	return 0;
249 }
250 
251 static int owl_i2c_xfer_common(struct i2c_adapter *adap, struct i2c_msg *msgs,
252 			       int num, bool atomic)
253 {
254 	struct owl_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
255 	struct i2c_msg *msg;
256 	unsigned long time_left, flags;
257 	unsigned int i2c_cmd, val;
258 	unsigned int addr;
259 	int ret, idx;
260 
261 	spin_lock_irqsave(&i2c_dev->lock, flags);
262 
263 	/* Reset I2C controller */
264 	owl_i2c_reset(i2c_dev);
265 
266 	/* Set bus frequency */
267 	owl_i2c_set_freq(i2c_dev);
268 
269 	/*
270 	 * Spinlock should be released before calling reset FIFO and
271 	 * bus busy check since those functions may sleep
272 	 */
273 	spin_unlock_irqrestore(&i2c_dev->lock, flags);
274 
275 	/* Reset FIFO */
276 	ret = owl_i2c_reset_fifo(i2c_dev);
277 	if (ret)
278 		goto unlocked_err_exit;
279 
280 	/* Check for bus busy */
281 	ret = owl_i2c_check_bus_busy(adap);
282 	if (ret)
283 		goto unlocked_err_exit;
284 
285 	spin_lock_irqsave(&i2c_dev->lock, flags);
286 
287 	/* Check for Arbitration lost */
288 	val = readl(i2c_dev->base + OWL_I2C_REG_STAT);
289 	if (val & OWL_I2C_STAT_LAB) {
290 		val &= ~OWL_I2C_STAT_LAB;
291 		writel(val, i2c_dev->base + OWL_I2C_REG_STAT);
292 		ret = -EAGAIN;
293 		goto err_exit;
294 	}
295 
296 	if (!atomic)
297 		reinit_completion(&i2c_dev->msg_complete);
298 
299 	/* Enable/disable I2C controller interrupt */
300 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
301 			   OWL_I2C_CTL_IRQE, !atomic);
302 
303 	/*
304 	 * Select: FIFO enable, Master mode, Stop enable, Data count enable,
305 	 * Send start bit
306 	 */
307 	i2c_cmd = OWL_I2C_CMD_SECL | OWL_I2C_CMD_MSS | OWL_I2C_CMD_SE |
308 		  OWL_I2C_CMD_NS | OWL_I2C_CMD_DE | OWL_I2C_CMD_SBE;
309 
310 	/* Handle repeated start condition */
311 	if (num > 1) {
312 		/* Set internal address length and enable repeated start */
313 		i2c_cmd |= OWL_I2C_CMD_AS(msgs[0].len + 1) |
314 			   OWL_I2C_CMD_SAS(1) | OWL_I2C_CMD_RBE;
315 
316 		/* Write slave address */
317 		addr = i2c_8bit_addr_from_msg(&msgs[0]);
318 		writel(addr, i2c_dev->base + OWL_I2C_REG_TXDAT);
319 
320 		/* Write internal register address */
321 		for (idx = 0; idx < msgs[0].len; idx++)
322 			writel(msgs[0].buf[idx],
323 			       i2c_dev->base + OWL_I2C_REG_TXDAT);
324 
325 		msg = &msgs[1];
326 	} else {
327 		/* Set address length */
328 		i2c_cmd |= OWL_I2C_CMD_AS(1);
329 		msg = &msgs[0];
330 	}
331 
332 	i2c_dev->msg = msg;
333 	i2c_dev->msg_ptr = 0;
334 
335 	/* Set data count for the message */
336 	writel(msg->len, i2c_dev->base + OWL_I2C_REG_DATCNT);
337 
338 	addr = i2c_8bit_addr_from_msg(msg);
339 	writel(addr, i2c_dev->base + OWL_I2C_REG_TXDAT);
340 
341 	if (!(msg->flags & I2C_M_RD)) {
342 		/* Write data to FIFO */
343 		for (idx = 0; idx < msg->len; idx++) {
344 			/* Check for FIFO full */
345 			if (readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT) &
346 			    OWL_I2C_FIFOSTAT_TFF)
347 				break;
348 
349 			writel(msg->buf[idx],
350 			       i2c_dev->base + OWL_I2C_REG_TXDAT);
351 		}
352 
353 		i2c_dev->msg_ptr = idx;
354 	}
355 
356 	/* Ignore the NACK if needed */
357 	if (msg->flags & I2C_M_IGNORE_NAK)
358 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOCTL,
359 				   OWL_I2C_FIFOCTL_NIB, true);
360 	else
361 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOCTL,
362 				   OWL_I2C_FIFOCTL_NIB, false);
363 
364 	/* Start the transfer */
365 	writel(i2c_cmd, i2c_dev->base + OWL_I2C_REG_CMD);
366 
367 	spin_unlock_irqrestore(&i2c_dev->lock, flags);
368 
369 	if (atomic) {
370 		/* Wait for Command Execute Completed or NACK Error bits */
371 		ret = readl_poll_timeout_atomic(i2c_dev->base + OWL_I2C_REG_FIFOSTAT,
372 						val, val & (OWL_I2C_FIFOSTAT_CECB |
373 							    OWL_I2C_FIFOSTAT_RNB),
374 						10, OWL_I2C_TIMEOUT_MS * 1000);
375 	} else {
376 		time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
377 							adap->timeout);
378 		if (!time_left)
379 			ret = -ETIMEDOUT;
380 	}
381 
382 	spin_lock_irqsave(&i2c_dev->lock, flags);
383 
384 	if (ret) {
385 		dev_err(&adap->dev, "Transaction timed out\n");
386 		/* Send stop condition and release the bus */
387 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
388 				   OWL_I2C_CTL_GBCC_STOP | OWL_I2C_CTL_RB,
389 				   true);
390 		goto err_exit;
391 	}
392 
393 	if (atomic)
394 		owl_i2c_xfer_data(i2c_dev);
395 
396 	ret = i2c_dev->err < 0 ? i2c_dev->err : num;
397 
398 err_exit:
399 	spin_unlock_irqrestore(&i2c_dev->lock, flags);
400 
401 unlocked_err_exit:
402 	/* Disable I2C controller */
403 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
404 			   OWL_I2C_CTL_EN, false);
405 
406 	return ret;
407 }
408 
409 static int owl_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
410 			int num)
411 {
412 	return owl_i2c_xfer_common(adap, msgs, num, false);
413 }
414 
415 static int owl_i2c_xfer_atomic(struct i2c_adapter *adap,
416 			       struct i2c_msg *msgs, int num)
417 {
418 	return owl_i2c_xfer_common(adap, msgs, num, true);
419 }
420 
421 static const struct i2c_algorithm owl_i2c_algorithm = {
422 	.master_xfer	     = owl_i2c_xfer,
423 	.master_xfer_atomic  = owl_i2c_xfer_atomic,
424 	.functionality	     = owl_i2c_func,
425 };
426 
427 static const struct i2c_adapter_quirks owl_i2c_quirks = {
428 	.flags		= I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST,
429 	.max_read_len   = 240,
430 	.max_write_len  = 240,
431 	.max_comb_1st_msg_len = 6,
432 	.max_comb_2nd_msg_len = 240,
433 };
434 
435 static int owl_i2c_probe(struct platform_device *pdev)
436 {
437 	struct device *dev = &pdev->dev;
438 	struct owl_i2c_dev *i2c_dev;
439 	int ret, irq;
440 
441 	i2c_dev = devm_kzalloc(dev, sizeof(*i2c_dev), GFP_KERNEL);
442 	if (!i2c_dev)
443 		return -ENOMEM;
444 
445 	i2c_dev->base = devm_platform_ioremap_resource(pdev, 0);
446 	if (IS_ERR(i2c_dev->base))
447 		return PTR_ERR(i2c_dev->base);
448 
449 	irq = platform_get_irq(pdev, 0);
450 	if (irq < 0)
451 		return irq;
452 
453 	if (of_property_read_u32(dev->of_node, "clock-frequency",
454 				 &i2c_dev->bus_freq))
455 		i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
456 
457 	/* We support only frequencies of 100k and 400k for now */
458 	if (i2c_dev->bus_freq != I2C_MAX_STANDARD_MODE_FREQ &&
459 	    i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ) {
460 		dev_err(dev, "invalid clock-frequency %d\n", i2c_dev->bus_freq);
461 		return -EINVAL;
462 	}
463 
464 	i2c_dev->clk = devm_clk_get(dev, NULL);
465 	if (IS_ERR(i2c_dev->clk)) {
466 		dev_err(dev, "failed to get clock\n");
467 		return PTR_ERR(i2c_dev->clk);
468 	}
469 
470 	ret = clk_prepare_enable(i2c_dev->clk);
471 	if (ret)
472 		return ret;
473 
474 	i2c_dev->clk_rate = clk_get_rate(i2c_dev->clk);
475 	if (!i2c_dev->clk_rate) {
476 		dev_err(dev, "input clock rate should not be zero\n");
477 		ret = -EINVAL;
478 		goto disable_clk;
479 	}
480 
481 	init_completion(&i2c_dev->msg_complete);
482 	spin_lock_init(&i2c_dev->lock);
483 	i2c_dev->adap.owner = THIS_MODULE;
484 	i2c_dev->adap.algo = &owl_i2c_algorithm;
485 	i2c_dev->adap.timeout = OWL_I2C_TIMEOUT;
486 	i2c_dev->adap.quirks = &owl_i2c_quirks;
487 	i2c_dev->adap.dev.parent = dev;
488 	i2c_dev->adap.dev.of_node = dev->of_node;
489 	snprintf(i2c_dev->adap.name, sizeof(i2c_dev->adap.name),
490 		 "%s", "OWL I2C adapter");
491 	i2c_set_adapdata(&i2c_dev->adap, i2c_dev);
492 
493 	platform_set_drvdata(pdev, i2c_dev);
494 
495 	ret = devm_request_irq(dev, irq, owl_i2c_interrupt, 0, pdev->name,
496 			       i2c_dev);
497 	if (ret) {
498 		dev_err(dev, "failed to request irq %d\n", irq);
499 		goto disable_clk;
500 	}
501 
502 	return i2c_add_adapter(&i2c_dev->adap);
503 
504 disable_clk:
505 	clk_disable_unprepare(i2c_dev->clk);
506 
507 	return ret;
508 }
509 
510 static const struct of_device_id owl_i2c_of_match[] = {
511 	{ .compatible = "actions,s500-i2c" },
512 	{ .compatible = "actions,s700-i2c" },
513 	{ .compatible = "actions,s900-i2c" },
514 	{ /* sentinel */ }
515 };
516 MODULE_DEVICE_TABLE(of, owl_i2c_of_match);
517 
518 static struct platform_driver owl_i2c_driver = {
519 	.probe		= owl_i2c_probe,
520 	.driver		= {
521 		.name	= "owl-i2c",
522 		.of_match_table = of_match_ptr(owl_i2c_of_match),
523 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
524 	},
525 };
526 module_platform_driver(owl_i2c_driver);
527 
528 MODULE_AUTHOR("David Liu <liuwei@actions-semi.com>");
529 MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
530 MODULE_DESCRIPTION("Actions Semiconductor Owl SoC's I2C driver");
531 MODULE_LICENSE("GPL");
532