xref: /openbmc/linux/drivers/i2c/busses/i2c-owl.c (revision 6db6b729)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Actions Semiconductor Owl SoC's I2C driver
4  *
5  * Copyright (c) 2014 Actions Semi Inc.
6  * Author: David Liu <liuwei@actions-semi.com>
7  *
8  * Copyright (c) 2018 Linaro Ltd.
9  * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
10  */
11 
12 #include <linux/clk.h>
13 #include <linux/delay.h>
14 #include <linux/i2c.h>
15 #include <linux/interrupt.h>
16 #include <linux/io.h>
17 #include <linux/iopoll.h>
18 #include <linux/module.h>
19 #include <linux/of.h>
20 #include <linux/platform_device.h>
21 
22 /* I2C registers */
23 #define OWL_I2C_REG_CTL		0x0000
24 #define OWL_I2C_REG_CLKDIV	0x0004
25 #define OWL_I2C_REG_STAT	0x0008
26 #define OWL_I2C_REG_ADDR	0x000C
27 #define OWL_I2C_REG_TXDAT	0x0010
28 #define OWL_I2C_REG_RXDAT	0x0014
29 #define OWL_I2C_REG_CMD		0x0018
30 #define OWL_I2C_REG_FIFOCTL	0x001C
31 #define OWL_I2C_REG_FIFOSTAT	0x0020
32 #define OWL_I2C_REG_DATCNT	0x0024
33 #define OWL_I2C_REG_RCNT	0x0028
34 
35 /* I2Cx_CTL Bit Mask */
36 #define OWL_I2C_CTL_RB		BIT(1)
37 #define OWL_I2C_CTL_GBCC(x)	(((x) & 0x3) << 2)
38 #define	OWL_I2C_CTL_GBCC_NONE	OWL_I2C_CTL_GBCC(0)
39 #define	OWL_I2C_CTL_GBCC_START	OWL_I2C_CTL_GBCC(1)
40 #define	OWL_I2C_CTL_GBCC_STOP	OWL_I2C_CTL_GBCC(2)
41 #define	OWL_I2C_CTL_GBCC_RSTART	OWL_I2C_CTL_GBCC(3)
42 #define OWL_I2C_CTL_IRQE	BIT(5)
43 #define OWL_I2C_CTL_EN		BIT(7)
44 #define OWL_I2C_CTL_AE		BIT(8)
45 #define OWL_I2C_CTL_SHSM	BIT(10)
46 
47 #define OWL_I2C_DIV_FACTOR(x)	((x) & 0xff)
48 
49 /* I2Cx_STAT Bit Mask */
50 #define OWL_I2C_STAT_RACK	BIT(0)
51 #define OWL_I2C_STAT_BEB	BIT(1)
52 #define OWL_I2C_STAT_IRQP	BIT(2)
53 #define OWL_I2C_STAT_LAB	BIT(3)
54 #define OWL_I2C_STAT_STPD	BIT(4)
55 #define OWL_I2C_STAT_STAD	BIT(5)
56 #define OWL_I2C_STAT_BBB	BIT(6)
57 #define OWL_I2C_STAT_TCB	BIT(7)
58 #define OWL_I2C_STAT_LBST	BIT(8)
59 #define OWL_I2C_STAT_SAMB	BIT(9)
60 #define OWL_I2C_STAT_SRGC	BIT(10)
61 
62 /* I2Cx_CMD Bit Mask */
63 #define OWL_I2C_CMD_SBE		BIT(0)
64 #define OWL_I2C_CMD_RBE		BIT(4)
65 #define OWL_I2C_CMD_DE		BIT(8)
66 #define OWL_I2C_CMD_NS		BIT(9)
67 #define OWL_I2C_CMD_SE		BIT(10)
68 #define OWL_I2C_CMD_MSS		BIT(11)
69 #define OWL_I2C_CMD_WRS		BIT(12)
70 #define OWL_I2C_CMD_SECL	BIT(15)
71 
72 #define OWL_I2C_CMD_AS(x)	(((x) & 0x7) << 1)
73 #define OWL_I2C_CMD_SAS(x)	(((x) & 0x7) << 5)
74 
75 /* I2Cx_FIFOCTL Bit Mask */
76 #define OWL_I2C_FIFOCTL_NIB	BIT(0)
77 #define OWL_I2C_FIFOCTL_RFR	BIT(1)
78 #define OWL_I2C_FIFOCTL_TFR	BIT(2)
79 
80 /* I2Cc_FIFOSTAT Bit Mask */
81 #define OWL_I2C_FIFOSTAT_CECB	BIT(0)
82 #define OWL_I2C_FIFOSTAT_RNB	BIT(1)
83 #define OWL_I2C_FIFOSTAT_RFE	BIT(2)
84 #define OWL_I2C_FIFOSTAT_TFF	BIT(5)
85 #define OWL_I2C_FIFOSTAT_TFD	GENMASK(23, 16)
86 #define OWL_I2C_FIFOSTAT_RFD	GENMASK(15, 8)
87 
88 /* I2C bus timeout */
89 #define OWL_I2C_TIMEOUT_MS	(4 * 1000)
90 #define OWL_I2C_TIMEOUT		msecs_to_jiffies(OWL_I2C_TIMEOUT_MS)
91 
92 #define OWL_I2C_MAX_RETRIES	50
93 
94 struct owl_i2c_dev {
95 	struct i2c_adapter	adap;
96 	struct i2c_msg		*msg;
97 	struct completion	msg_complete;
98 	struct clk		*clk;
99 	spinlock_t		lock;
100 	void __iomem		*base;
101 	unsigned long		clk_rate;
102 	u32			bus_freq;
103 	u32			msg_ptr;
104 	int			err;
105 };
106 
107 static void owl_i2c_update_reg(void __iomem *reg, unsigned int val, bool state)
108 {
109 	unsigned int regval;
110 
111 	regval = readl(reg);
112 
113 	if (state)
114 		regval |= val;
115 	else
116 		regval &= ~val;
117 
118 	writel(regval, reg);
119 }
120 
121 static void owl_i2c_reset(struct owl_i2c_dev *i2c_dev)
122 {
123 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
124 			   OWL_I2C_CTL_EN, false);
125 	mdelay(1);
126 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
127 			   OWL_I2C_CTL_EN, true);
128 
129 	/* Clear status registers */
130 	writel(0, i2c_dev->base + OWL_I2C_REG_STAT);
131 }
132 
133 static int owl_i2c_reset_fifo(struct owl_i2c_dev *i2c_dev)
134 {
135 	unsigned int val, timeout = 0;
136 
137 	/* Reset FIFO */
138 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOCTL,
139 			   OWL_I2C_FIFOCTL_RFR | OWL_I2C_FIFOCTL_TFR,
140 			   true);
141 
142 	/* Wait 50ms for FIFO reset complete */
143 	do {
144 		val = readl(i2c_dev->base + OWL_I2C_REG_FIFOCTL);
145 		if (!(val & (OWL_I2C_FIFOCTL_RFR | OWL_I2C_FIFOCTL_TFR)))
146 			break;
147 		usleep_range(500, 1000);
148 	} while (timeout++ < OWL_I2C_MAX_RETRIES);
149 
150 	if (timeout > OWL_I2C_MAX_RETRIES) {
151 		dev_err(&i2c_dev->adap.dev, "FIFO reset timeout\n");
152 		return -ETIMEDOUT;
153 	}
154 
155 	return 0;
156 }
157 
158 static void owl_i2c_set_freq(struct owl_i2c_dev *i2c_dev)
159 {
160 	unsigned int val;
161 
162 	val = DIV_ROUND_UP(i2c_dev->clk_rate, i2c_dev->bus_freq * 16);
163 
164 	/* Set clock divider factor */
165 	writel(OWL_I2C_DIV_FACTOR(val), i2c_dev->base + OWL_I2C_REG_CLKDIV);
166 }
167 
168 static void owl_i2c_xfer_data(struct owl_i2c_dev *i2c_dev)
169 {
170 	struct i2c_msg *msg = i2c_dev->msg;
171 	unsigned int stat, fifostat;
172 
173 	i2c_dev->err = 0;
174 
175 	/* Handle NACK from slave */
176 	fifostat = readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT);
177 	if (fifostat & OWL_I2C_FIFOSTAT_RNB) {
178 		i2c_dev->err = -ENXIO;
179 		/* Clear NACK error bit by writing "1" */
180 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOSTAT,
181 				   OWL_I2C_FIFOSTAT_RNB, true);
182 		return;
183 	}
184 
185 	/* Handle bus error */
186 	stat = readl(i2c_dev->base + OWL_I2C_REG_STAT);
187 	if (stat & OWL_I2C_STAT_BEB) {
188 		i2c_dev->err = -EIO;
189 		/* Clear BUS error bit by writing "1" */
190 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_STAT,
191 				   OWL_I2C_STAT_BEB, true);
192 		return;
193 	}
194 
195 	/* Handle FIFO read */
196 	if (msg->flags & I2C_M_RD) {
197 		while ((readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT) &
198 			OWL_I2C_FIFOSTAT_RFE) && i2c_dev->msg_ptr < msg->len) {
199 			msg->buf[i2c_dev->msg_ptr++] = readl(i2c_dev->base +
200 							     OWL_I2C_REG_RXDAT);
201 		}
202 	} else {
203 		/* Handle the remaining bytes which were not sent */
204 		while (!(readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT) &
205 			 OWL_I2C_FIFOSTAT_TFF) && i2c_dev->msg_ptr < msg->len) {
206 			writel(msg->buf[i2c_dev->msg_ptr++],
207 			       i2c_dev->base + OWL_I2C_REG_TXDAT);
208 		}
209 	}
210 }
211 
212 static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
213 {
214 	struct owl_i2c_dev *i2c_dev = _dev;
215 
216 	spin_lock(&i2c_dev->lock);
217 
218 	owl_i2c_xfer_data(i2c_dev);
219 
220 	/* Clear pending interrupts */
221 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_STAT,
222 			   OWL_I2C_STAT_IRQP, true);
223 
224 	complete_all(&i2c_dev->msg_complete);
225 	spin_unlock(&i2c_dev->lock);
226 
227 	return IRQ_HANDLED;
228 }
229 
230 static u32 owl_i2c_func(struct i2c_adapter *adap)
231 {
232 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
233 }
234 
235 static int owl_i2c_check_bus_busy(struct i2c_adapter *adap)
236 {
237 	struct owl_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
238 	unsigned long timeout;
239 
240 	/* Check for Bus busy */
241 	timeout = jiffies + OWL_I2C_TIMEOUT;
242 	while (readl(i2c_dev->base + OWL_I2C_REG_STAT) & OWL_I2C_STAT_BBB) {
243 		if (time_after(jiffies, timeout)) {
244 			dev_err(&adap->dev, "Bus busy timeout\n");
245 			return -ETIMEDOUT;
246 		}
247 	}
248 
249 	return 0;
250 }
251 
252 static int owl_i2c_xfer_common(struct i2c_adapter *adap, struct i2c_msg *msgs,
253 			       int num, bool atomic)
254 {
255 	struct owl_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
256 	struct i2c_msg *msg;
257 	unsigned long time_left, flags;
258 	unsigned int i2c_cmd, val;
259 	unsigned int addr;
260 	int ret, idx;
261 
262 	spin_lock_irqsave(&i2c_dev->lock, flags);
263 
264 	/* Reset I2C controller */
265 	owl_i2c_reset(i2c_dev);
266 
267 	/* Set bus frequency */
268 	owl_i2c_set_freq(i2c_dev);
269 
270 	/*
271 	 * Spinlock should be released before calling reset FIFO and
272 	 * bus busy check since those functions may sleep
273 	 */
274 	spin_unlock_irqrestore(&i2c_dev->lock, flags);
275 
276 	/* Reset FIFO */
277 	ret = owl_i2c_reset_fifo(i2c_dev);
278 	if (ret)
279 		goto unlocked_err_exit;
280 
281 	/* Check for bus busy */
282 	ret = owl_i2c_check_bus_busy(adap);
283 	if (ret)
284 		goto unlocked_err_exit;
285 
286 	spin_lock_irqsave(&i2c_dev->lock, flags);
287 
288 	/* Check for Arbitration lost */
289 	val = readl(i2c_dev->base + OWL_I2C_REG_STAT);
290 	if (val & OWL_I2C_STAT_LAB) {
291 		val &= ~OWL_I2C_STAT_LAB;
292 		writel(val, i2c_dev->base + OWL_I2C_REG_STAT);
293 		ret = -EAGAIN;
294 		goto err_exit;
295 	}
296 
297 	if (!atomic)
298 		reinit_completion(&i2c_dev->msg_complete);
299 
300 	/* Enable/disable I2C controller interrupt */
301 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
302 			   OWL_I2C_CTL_IRQE, !atomic);
303 
304 	/*
305 	 * Select: FIFO enable, Master mode, Stop enable, Data count enable,
306 	 * Send start bit
307 	 */
308 	i2c_cmd = OWL_I2C_CMD_SECL | OWL_I2C_CMD_MSS | OWL_I2C_CMD_SE |
309 		  OWL_I2C_CMD_NS | OWL_I2C_CMD_DE | OWL_I2C_CMD_SBE;
310 
311 	/* Handle repeated start condition */
312 	if (num > 1) {
313 		/* Set internal address length and enable repeated start */
314 		i2c_cmd |= OWL_I2C_CMD_AS(msgs[0].len + 1) |
315 			   OWL_I2C_CMD_SAS(1) | OWL_I2C_CMD_RBE;
316 
317 		/* Write slave address */
318 		addr = i2c_8bit_addr_from_msg(&msgs[0]);
319 		writel(addr, i2c_dev->base + OWL_I2C_REG_TXDAT);
320 
321 		/* Write internal register address */
322 		for (idx = 0; idx < msgs[0].len; idx++)
323 			writel(msgs[0].buf[idx],
324 			       i2c_dev->base + OWL_I2C_REG_TXDAT);
325 
326 		msg = &msgs[1];
327 	} else {
328 		/* Set address length */
329 		i2c_cmd |= OWL_I2C_CMD_AS(1);
330 		msg = &msgs[0];
331 	}
332 
333 	i2c_dev->msg = msg;
334 	i2c_dev->msg_ptr = 0;
335 
336 	/* Set data count for the message */
337 	writel(msg->len, i2c_dev->base + OWL_I2C_REG_DATCNT);
338 
339 	addr = i2c_8bit_addr_from_msg(msg);
340 	writel(addr, i2c_dev->base + OWL_I2C_REG_TXDAT);
341 
342 	if (!(msg->flags & I2C_M_RD)) {
343 		/* Write data to FIFO */
344 		for (idx = 0; idx < msg->len; idx++) {
345 			/* Check for FIFO full */
346 			if (readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT) &
347 			    OWL_I2C_FIFOSTAT_TFF)
348 				break;
349 
350 			writel(msg->buf[idx],
351 			       i2c_dev->base + OWL_I2C_REG_TXDAT);
352 		}
353 
354 		i2c_dev->msg_ptr = idx;
355 	}
356 
357 	/* Ignore the NACK if needed */
358 	if (msg->flags & I2C_M_IGNORE_NAK)
359 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOCTL,
360 				   OWL_I2C_FIFOCTL_NIB, true);
361 	else
362 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOCTL,
363 				   OWL_I2C_FIFOCTL_NIB, false);
364 
365 	/* Start the transfer */
366 	writel(i2c_cmd, i2c_dev->base + OWL_I2C_REG_CMD);
367 
368 	spin_unlock_irqrestore(&i2c_dev->lock, flags);
369 
370 	if (atomic) {
371 		/* Wait for Command Execute Completed or NACK Error bits */
372 		ret = readl_poll_timeout_atomic(i2c_dev->base + OWL_I2C_REG_FIFOSTAT,
373 						val, val & (OWL_I2C_FIFOSTAT_CECB |
374 							    OWL_I2C_FIFOSTAT_RNB),
375 						10, OWL_I2C_TIMEOUT_MS * 1000);
376 	} else {
377 		time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
378 							adap->timeout);
379 		if (!time_left)
380 			ret = -ETIMEDOUT;
381 	}
382 
383 	spin_lock_irqsave(&i2c_dev->lock, flags);
384 
385 	if (ret) {
386 		dev_err(&adap->dev, "Transaction timed out\n");
387 		/* Send stop condition and release the bus */
388 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
389 				   OWL_I2C_CTL_GBCC_STOP | OWL_I2C_CTL_RB,
390 				   true);
391 		goto err_exit;
392 	}
393 
394 	if (atomic)
395 		owl_i2c_xfer_data(i2c_dev);
396 
397 	ret = i2c_dev->err < 0 ? i2c_dev->err : num;
398 
399 err_exit:
400 	spin_unlock_irqrestore(&i2c_dev->lock, flags);
401 
402 unlocked_err_exit:
403 	/* Disable I2C controller */
404 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
405 			   OWL_I2C_CTL_EN, false);
406 
407 	return ret;
408 }
409 
410 static int owl_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
411 			int num)
412 {
413 	return owl_i2c_xfer_common(adap, msgs, num, false);
414 }
415 
416 static int owl_i2c_xfer_atomic(struct i2c_adapter *adap,
417 			       struct i2c_msg *msgs, int num)
418 {
419 	return owl_i2c_xfer_common(adap, msgs, num, true);
420 }
421 
422 static const struct i2c_algorithm owl_i2c_algorithm = {
423 	.master_xfer	     = owl_i2c_xfer,
424 	.master_xfer_atomic  = owl_i2c_xfer_atomic,
425 	.functionality	     = owl_i2c_func,
426 };
427 
428 static const struct i2c_adapter_quirks owl_i2c_quirks = {
429 	.flags		= I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST,
430 	.max_read_len   = 240,
431 	.max_write_len  = 240,
432 	.max_comb_1st_msg_len = 6,
433 	.max_comb_2nd_msg_len = 240,
434 };
435 
436 static int owl_i2c_probe(struct platform_device *pdev)
437 {
438 	struct device *dev = &pdev->dev;
439 	struct owl_i2c_dev *i2c_dev;
440 	int ret, irq;
441 
442 	i2c_dev = devm_kzalloc(dev, sizeof(*i2c_dev), GFP_KERNEL);
443 	if (!i2c_dev)
444 		return -ENOMEM;
445 
446 	i2c_dev->base = devm_platform_ioremap_resource(pdev, 0);
447 	if (IS_ERR(i2c_dev->base))
448 		return PTR_ERR(i2c_dev->base);
449 
450 	irq = platform_get_irq(pdev, 0);
451 	if (irq < 0)
452 		return irq;
453 
454 	if (of_property_read_u32(dev->of_node, "clock-frequency",
455 				 &i2c_dev->bus_freq))
456 		i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
457 
458 	/* We support only frequencies of 100k and 400k for now */
459 	if (i2c_dev->bus_freq != I2C_MAX_STANDARD_MODE_FREQ &&
460 	    i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ) {
461 		dev_err(dev, "invalid clock-frequency %d\n", i2c_dev->bus_freq);
462 		return -EINVAL;
463 	}
464 
465 	i2c_dev->clk = devm_clk_get_enabled(dev, NULL);
466 	if (IS_ERR(i2c_dev->clk)) {
467 		dev_err(dev, "failed to enable clock\n");
468 		return PTR_ERR(i2c_dev->clk);
469 	}
470 
471 	i2c_dev->clk_rate = clk_get_rate(i2c_dev->clk);
472 	if (!i2c_dev->clk_rate) {
473 		dev_err(dev, "input clock rate should not be zero\n");
474 		return -EINVAL;
475 	}
476 
477 	init_completion(&i2c_dev->msg_complete);
478 	spin_lock_init(&i2c_dev->lock);
479 	i2c_dev->adap.owner = THIS_MODULE;
480 	i2c_dev->adap.algo = &owl_i2c_algorithm;
481 	i2c_dev->adap.timeout = OWL_I2C_TIMEOUT;
482 	i2c_dev->adap.quirks = &owl_i2c_quirks;
483 	i2c_dev->adap.dev.parent = dev;
484 	i2c_dev->adap.dev.of_node = dev->of_node;
485 	snprintf(i2c_dev->adap.name, sizeof(i2c_dev->adap.name),
486 		 "%s", "OWL I2C adapter");
487 	i2c_set_adapdata(&i2c_dev->adap, i2c_dev);
488 
489 	platform_set_drvdata(pdev, i2c_dev);
490 
491 	ret = devm_request_irq(dev, irq, owl_i2c_interrupt, 0, pdev->name,
492 			       i2c_dev);
493 	if (ret) {
494 		dev_err(dev, "failed to request irq %d\n", irq);
495 		return ret;
496 	}
497 
498 	return i2c_add_adapter(&i2c_dev->adap);
499 }
500 
501 static const struct of_device_id owl_i2c_of_match[] = {
502 	{ .compatible = "actions,s500-i2c" },
503 	{ .compatible = "actions,s700-i2c" },
504 	{ .compatible = "actions,s900-i2c" },
505 	{ /* sentinel */ }
506 };
507 MODULE_DEVICE_TABLE(of, owl_i2c_of_match);
508 
509 static struct platform_driver owl_i2c_driver = {
510 	.probe		= owl_i2c_probe,
511 	.driver		= {
512 		.name	= "owl-i2c",
513 		.of_match_table = owl_i2c_of_match,
514 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
515 	},
516 };
517 module_platform_driver(owl_i2c_driver);
518 
519 MODULE_AUTHOR("David Liu <liuwei@actions-semi.com>");
520 MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
521 MODULE_DESCRIPTION("Actions Semiconductor Owl SoC's I2C driver");
522 MODULE_LICENSE("GPL");
523