1 /* 2 * TI OMAP I2C master mode driver 3 * 4 * Copyright (C) 2003 MontaVista Software, Inc. 5 * Copyright (C) 2005 Nokia Corporation 6 * Copyright (C) 2004 - 2007 Texas Instruments. 7 * 8 * Originally written by MontaVista Software, Inc. 9 * Additional contributions by: 10 * Tony Lindgren <tony@atomide.com> 11 * Imre Deak <imre.deak@nokia.com> 12 * Juha Yrjölä <juha.yrjola@solidboot.com> 13 * Syed Khasim <x0khasim@ti.com> 14 * Nishant Menon <nm@ti.com> 15 * 16 * This program is free software; you can redistribute it and/or modify 17 * it under the terms of the GNU General Public License as published by 18 * the Free Software Foundation; either version 2 of the License, or 19 * (at your option) any later version. 20 * 21 * This program is distributed in the hope that it will be useful, 22 * but WITHOUT ANY WARRANTY; without even the implied warranty of 23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 24 * GNU General Public License for more details. 25 */ 26 27 #include <linux/module.h> 28 #include <linux/delay.h> 29 #include <linux/i2c.h> 30 #include <linux/err.h> 31 #include <linux/interrupt.h> 32 #include <linux/completion.h> 33 #include <linux/platform_device.h> 34 #include <linux/clk.h> 35 #include <linux/io.h> 36 #include <linux/of.h> 37 #include <linux/of_device.h> 38 #include <linux/slab.h> 39 #include <linux/i2c-omap.h> 40 #include <linux/pm_runtime.h> 41 #include <linux/pinctrl/consumer.h> 42 43 /* I2C controller revisions */ 44 #define OMAP_I2C_OMAP1_REV_2 0x20 45 46 /* I2C controller revisions present on specific hardware */ 47 #define OMAP_I2C_REV_ON_2430 0x00000036 48 #define OMAP_I2C_REV_ON_3430_3530 0x0000003C 49 #define OMAP_I2C_REV_ON_3630 0x00000040 50 #define OMAP_I2C_REV_ON_4430_PLUS 0x50400002 51 52 /* timeout waiting for the controller to respond */ 53 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000)) 54 55 /* timeout for pm runtime autosuspend */ 56 #define OMAP_I2C_PM_TIMEOUT 1000 /* ms */ 57 58 /* timeout for making decision on bus free status */ 59 #define OMAP_I2C_BUS_FREE_TIMEOUT (msecs_to_jiffies(10)) 60 61 /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */ 62 enum { 63 OMAP_I2C_REV_REG = 0, 64 OMAP_I2C_IE_REG, 65 OMAP_I2C_STAT_REG, 66 OMAP_I2C_IV_REG, 67 OMAP_I2C_WE_REG, 68 OMAP_I2C_SYSS_REG, 69 OMAP_I2C_BUF_REG, 70 OMAP_I2C_CNT_REG, 71 OMAP_I2C_DATA_REG, 72 OMAP_I2C_SYSC_REG, 73 OMAP_I2C_CON_REG, 74 OMAP_I2C_OA_REG, 75 OMAP_I2C_SA_REG, 76 OMAP_I2C_PSC_REG, 77 OMAP_I2C_SCLL_REG, 78 OMAP_I2C_SCLH_REG, 79 OMAP_I2C_SYSTEST_REG, 80 OMAP_I2C_BUFSTAT_REG, 81 /* only on OMAP4430 */ 82 OMAP_I2C_IP_V2_REVNB_LO, 83 OMAP_I2C_IP_V2_REVNB_HI, 84 OMAP_I2C_IP_V2_IRQSTATUS_RAW, 85 OMAP_I2C_IP_V2_IRQENABLE_SET, 86 OMAP_I2C_IP_V2_IRQENABLE_CLR, 87 }; 88 89 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */ 90 #define OMAP_I2C_IE_XDR (1 << 14) /* TX Buffer drain int enable */ 91 #define OMAP_I2C_IE_RDR (1 << 13) /* RX Buffer drain int enable */ 92 #define OMAP_I2C_IE_XRDY (1 << 4) /* TX data ready int enable */ 93 #define OMAP_I2C_IE_RRDY (1 << 3) /* RX data ready int enable */ 94 #define OMAP_I2C_IE_ARDY (1 << 2) /* Access ready int enable */ 95 #define OMAP_I2C_IE_NACK (1 << 1) /* No ack interrupt enable */ 96 #define OMAP_I2C_IE_AL (1 << 0) /* Arbitration lost int ena */ 97 98 /* I2C Status Register (OMAP_I2C_STAT): */ 99 #define OMAP_I2C_STAT_XDR (1 << 14) /* TX Buffer draining */ 100 #define OMAP_I2C_STAT_RDR (1 << 13) /* RX Buffer draining */ 101 #define OMAP_I2C_STAT_BB (1 << 12) /* Bus busy */ 102 #define OMAP_I2C_STAT_ROVR (1 << 11) /* Receive overrun */ 103 #define OMAP_I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ 104 #define OMAP_I2C_STAT_AAS (1 << 9) /* Address as slave */ 105 #define OMAP_I2C_STAT_BF (1 << 8) /* Bus Free */ 106 #define OMAP_I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ 107 #define OMAP_I2C_STAT_RRDY (1 << 3) /* Receive data ready */ 108 #define OMAP_I2C_STAT_ARDY (1 << 2) /* Register access ready */ 109 #define OMAP_I2C_STAT_NACK (1 << 1) /* No ack interrupt enable */ 110 #define OMAP_I2C_STAT_AL (1 << 0) /* Arbitration lost int ena */ 111 112 /* I2C WE wakeup enable register */ 113 #define OMAP_I2C_WE_XDR_WE (1 << 14) /* TX drain wakup */ 114 #define OMAP_I2C_WE_RDR_WE (1 << 13) /* RX drain wakeup */ 115 #define OMAP_I2C_WE_AAS_WE (1 << 9) /* Address as slave wakeup*/ 116 #define OMAP_I2C_WE_BF_WE (1 << 8) /* Bus free wakeup */ 117 #define OMAP_I2C_WE_STC_WE (1 << 6) /* Start condition wakeup */ 118 #define OMAP_I2C_WE_GC_WE (1 << 5) /* General call wakeup */ 119 #define OMAP_I2C_WE_DRDY_WE (1 << 3) /* TX/RX data ready wakeup */ 120 #define OMAP_I2C_WE_ARDY_WE (1 << 2) /* Reg access ready wakeup */ 121 #define OMAP_I2C_WE_NACK_WE (1 << 1) /* No acknowledgment wakeup */ 122 #define OMAP_I2C_WE_AL_WE (1 << 0) /* Arbitration lost wakeup */ 123 124 #define OMAP_I2C_WE_ALL (OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \ 125 OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \ 126 OMAP_I2C_WE_STC_WE | OMAP_I2C_WE_GC_WE | \ 127 OMAP_I2C_WE_DRDY_WE | OMAP_I2C_WE_ARDY_WE | \ 128 OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE) 129 130 /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */ 131 #define OMAP_I2C_BUF_RDMA_EN (1 << 15) /* RX DMA channel enable */ 132 #define OMAP_I2C_BUF_RXFIF_CLR (1 << 14) /* RX FIFO Clear */ 133 #define OMAP_I2C_BUF_XDMA_EN (1 << 7) /* TX DMA channel enable */ 134 #define OMAP_I2C_BUF_TXFIF_CLR (1 << 6) /* TX FIFO Clear */ 135 136 /* I2C Configuration Register (OMAP_I2C_CON): */ 137 #define OMAP_I2C_CON_EN (1 << 15) /* I2C module enable */ 138 #define OMAP_I2C_CON_BE (1 << 14) /* Big endian mode */ 139 #define OMAP_I2C_CON_OPMODE_HS (1 << 12) /* High Speed support */ 140 #define OMAP_I2C_CON_STB (1 << 11) /* Start byte mode (master) */ 141 #define OMAP_I2C_CON_MST (1 << 10) /* Master/slave mode */ 142 #define OMAP_I2C_CON_TRX (1 << 9) /* TX/RX mode (master only) */ 143 #define OMAP_I2C_CON_XA (1 << 8) /* Expand address */ 144 #define OMAP_I2C_CON_RM (1 << 2) /* Repeat mode (master only) */ 145 #define OMAP_I2C_CON_STP (1 << 1) /* Stop cond (master only) */ 146 #define OMAP_I2C_CON_STT (1 << 0) /* Start condition (master) */ 147 148 /* I2C SCL time value when Master */ 149 #define OMAP_I2C_SCLL_HSSCLL 8 150 #define OMAP_I2C_SCLH_HSSCLH 8 151 152 /* I2C System Test Register (OMAP_I2C_SYSTEST): */ 153 #define OMAP_I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ 154 #define OMAP_I2C_SYSTEST_FREE (1 << 14) /* Free running mode */ 155 #define OMAP_I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ 156 #define OMAP_I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ 157 /* Functional mode */ 158 #define OMAP_I2C_SYSTEST_SCL_I_FUNC (1 << 8) /* SCL line input value */ 159 #define OMAP_I2C_SYSTEST_SCL_O_FUNC (1 << 7) /* SCL line output value */ 160 #define OMAP_I2C_SYSTEST_SDA_I_FUNC (1 << 6) /* SDA line input value */ 161 #define OMAP_I2C_SYSTEST_SDA_O_FUNC (1 << 5) /* SDA line output value */ 162 /* SDA/SCL IO mode */ 163 #define OMAP_I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense in */ 164 #define OMAP_I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive out */ 165 #define OMAP_I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense in */ 166 #define OMAP_I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive out */ 167 168 /* OCP_SYSSTATUS bit definitions */ 169 #define SYSS_RESETDONE_MASK (1 << 0) 170 171 /* OCP_SYSCONFIG bit definitions */ 172 #define SYSC_CLOCKACTIVITY_MASK (0x3 << 8) 173 #define SYSC_SIDLEMODE_MASK (0x3 << 3) 174 #define SYSC_ENAWAKEUP_MASK (1 << 2) 175 #define SYSC_SOFTRESET_MASK (1 << 1) 176 #define SYSC_AUTOIDLE_MASK (1 << 0) 177 178 #define SYSC_IDLEMODE_SMART 0x2 179 #define SYSC_CLOCKACTIVITY_FCLK 0x2 180 181 /* Errata definitions */ 182 #define I2C_OMAP_ERRATA_I207 (1 << 0) 183 #define I2C_OMAP_ERRATA_I462 (1 << 1) 184 185 #define OMAP_I2C_IP_V2_INTERRUPTS_MASK 0x6FFF 186 187 struct omap_i2c_dev { 188 struct device *dev; 189 void __iomem *base; /* virtual */ 190 int irq; 191 int reg_shift; /* bit shift for I2C register addresses */ 192 struct completion cmd_complete; 193 struct resource *ioarea; 194 u32 latency; /* maximum mpu wkup latency */ 195 void (*set_mpu_wkup_lat)(struct device *dev, 196 long latency); 197 u32 speed; /* Speed of bus in kHz */ 198 u32 flags; 199 u16 scheme; 200 u16 cmd_err; 201 u8 *buf; 202 u8 *regs; 203 size_t buf_len; 204 struct i2c_adapter adapter; 205 u8 threshold; 206 u8 fifo_size; /* use as flag and value 207 * fifo_size==0 implies no fifo 208 * if set, should be trsh+1 209 */ 210 u32 rev; 211 unsigned b_hw:1; /* bad h/w fixes */ 212 unsigned bb_valid:1; /* true when BB-bit reflects 213 * the I2C bus state 214 */ 215 unsigned receiver:1; /* true when we're in receiver mode */ 216 u16 iestate; /* Saved interrupt register */ 217 u16 pscstate; 218 u16 scllstate; 219 u16 sclhstate; 220 u16 syscstate; 221 u16 westate; 222 u16 errata; 223 }; 224 225 static const u8 reg_map_ip_v1[] = { 226 [OMAP_I2C_REV_REG] = 0x00, 227 [OMAP_I2C_IE_REG] = 0x01, 228 [OMAP_I2C_STAT_REG] = 0x02, 229 [OMAP_I2C_IV_REG] = 0x03, 230 [OMAP_I2C_WE_REG] = 0x03, 231 [OMAP_I2C_SYSS_REG] = 0x04, 232 [OMAP_I2C_BUF_REG] = 0x05, 233 [OMAP_I2C_CNT_REG] = 0x06, 234 [OMAP_I2C_DATA_REG] = 0x07, 235 [OMAP_I2C_SYSC_REG] = 0x08, 236 [OMAP_I2C_CON_REG] = 0x09, 237 [OMAP_I2C_OA_REG] = 0x0a, 238 [OMAP_I2C_SA_REG] = 0x0b, 239 [OMAP_I2C_PSC_REG] = 0x0c, 240 [OMAP_I2C_SCLL_REG] = 0x0d, 241 [OMAP_I2C_SCLH_REG] = 0x0e, 242 [OMAP_I2C_SYSTEST_REG] = 0x0f, 243 [OMAP_I2C_BUFSTAT_REG] = 0x10, 244 }; 245 246 static const u8 reg_map_ip_v2[] = { 247 [OMAP_I2C_REV_REG] = 0x04, 248 [OMAP_I2C_IE_REG] = 0x2c, 249 [OMAP_I2C_STAT_REG] = 0x28, 250 [OMAP_I2C_IV_REG] = 0x34, 251 [OMAP_I2C_WE_REG] = 0x34, 252 [OMAP_I2C_SYSS_REG] = 0x90, 253 [OMAP_I2C_BUF_REG] = 0x94, 254 [OMAP_I2C_CNT_REG] = 0x98, 255 [OMAP_I2C_DATA_REG] = 0x9c, 256 [OMAP_I2C_SYSC_REG] = 0x10, 257 [OMAP_I2C_CON_REG] = 0xa4, 258 [OMAP_I2C_OA_REG] = 0xa8, 259 [OMAP_I2C_SA_REG] = 0xac, 260 [OMAP_I2C_PSC_REG] = 0xb0, 261 [OMAP_I2C_SCLL_REG] = 0xb4, 262 [OMAP_I2C_SCLH_REG] = 0xb8, 263 [OMAP_I2C_SYSTEST_REG] = 0xbC, 264 [OMAP_I2C_BUFSTAT_REG] = 0xc0, 265 [OMAP_I2C_IP_V2_REVNB_LO] = 0x00, 266 [OMAP_I2C_IP_V2_REVNB_HI] = 0x04, 267 [OMAP_I2C_IP_V2_IRQSTATUS_RAW] = 0x24, 268 [OMAP_I2C_IP_V2_IRQENABLE_SET] = 0x2c, 269 [OMAP_I2C_IP_V2_IRQENABLE_CLR] = 0x30, 270 }; 271 272 static inline void omap_i2c_write_reg(struct omap_i2c_dev *omap, 273 int reg, u16 val) 274 { 275 writew_relaxed(val, omap->base + 276 (omap->regs[reg] << omap->reg_shift)); 277 } 278 279 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *omap, int reg) 280 { 281 return readw_relaxed(omap->base + 282 (omap->regs[reg] << omap->reg_shift)); 283 } 284 285 static void __omap_i2c_init(struct omap_i2c_dev *omap) 286 { 287 288 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0); 289 290 /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */ 291 omap_i2c_write_reg(omap, OMAP_I2C_PSC_REG, omap->pscstate); 292 293 /* SCL low and high time values */ 294 omap_i2c_write_reg(omap, OMAP_I2C_SCLL_REG, omap->scllstate); 295 omap_i2c_write_reg(omap, OMAP_I2C_SCLH_REG, omap->sclhstate); 296 if (omap->rev >= OMAP_I2C_REV_ON_3430_3530) 297 omap_i2c_write_reg(omap, OMAP_I2C_WE_REG, omap->westate); 298 299 /* Take the I2C module out of reset: */ 300 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); 301 302 /* 303 * NOTE: right after setting CON_EN, STAT_BB could be 0 while the 304 * bus is busy. It will be changed to 1 on the next IP FCLK clock. 305 * udelay(1) will be enough to fix that. 306 */ 307 308 /* 309 * Don't write to this register if the IE state is 0 as it can 310 * cause deadlock. 311 */ 312 if (omap->iestate) 313 omap_i2c_write_reg(omap, OMAP_I2C_IE_REG, omap->iestate); 314 } 315 316 static int omap_i2c_reset(struct omap_i2c_dev *omap) 317 { 318 unsigned long timeout; 319 u16 sysc; 320 321 if (omap->rev >= OMAP_I2C_OMAP1_REV_2) { 322 sysc = omap_i2c_read_reg(omap, OMAP_I2C_SYSC_REG); 323 324 /* Disable I2C controller before soft reset */ 325 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 326 omap_i2c_read_reg(omap, OMAP_I2C_CON_REG) & 327 ~(OMAP_I2C_CON_EN)); 328 329 omap_i2c_write_reg(omap, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK); 330 /* For some reason we need to set the EN bit before the 331 * reset done bit gets set. */ 332 timeout = jiffies + OMAP_I2C_TIMEOUT; 333 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); 334 while (!(omap_i2c_read_reg(omap, OMAP_I2C_SYSS_REG) & 335 SYSS_RESETDONE_MASK)) { 336 if (time_after(jiffies, timeout)) { 337 dev_warn(omap->dev, "timeout waiting " 338 "for controller reset\n"); 339 return -ETIMEDOUT; 340 } 341 msleep(1); 342 } 343 344 /* SYSC register is cleared by the reset; rewrite it */ 345 omap_i2c_write_reg(omap, OMAP_I2C_SYSC_REG, sysc); 346 347 if (omap->rev > OMAP_I2C_REV_ON_3430_3530) { 348 /* Schedule I2C-bus monitoring on the next transfer */ 349 omap->bb_valid = 0; 350 } 351 } 352 353 return 0; 354 } 355 356 static int omap_i2c_init(struct omap_i2c_dev *omap) 357 { 358 u16 psc = 0, scll = 0, sclh = 0; 359 u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0; 360 unsigned long fclk_rate = 12000000; 361 unsigned long internal_clk = 0; 362 struct clk *fclk; 363 364 if (omap->rev >= OMAP_I2C_REV_ON_3430_3530) { 365 /* 366 * Enabling all wakup sources to stop I2C freezing on 367 * WFI instruction. 368 * REVISIT: Some wkup sources might not be needed. 369 */ 370 omap->westate = OMAP_I2C_WE_ALL; 371 } 372 373 if (omap->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) { 374 /* 375 * The I2C functional clock is the armxor_ck, so there's 376 * no need to get "armxor_ck" separately. Now, if OMAP2420 377 * always returns 12MHz for the functional clock, we can 378 * do this bit unconditionally. 379 */ 380 fclk = clk_get(omap->dev, "fck"); 381 fclk_rate = clk_get_rate(fclk); 382 clk_put(fclk); 383 384 /* TRM for 5912 says the I2C clock must be prescaled to be 385 * between 7 - 12 MHz. The XOR input clock is typically 386 * 12, 13 or 19.2 MHz. So we should have code that produces: 387 * 388 * XOR MHz Divider Prescaler 389 * 12 1 0 390 * 13 2 1 391 * 19.2 2 1 392 */ 393 if (fclk_rate > 12000000) 394 psc = fclk_rate / 12000000; 395 } 396 397 if (!(omap->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) { 398 399 /* 400 * HSI2C controller internal clk rate should be 19.2 Mhz for 401 * HS and for all modes on 2430. On 34xx we can use lower rate 402 * to get longer filter period for better noise suppression. 403 * The filter is iclk (fclk for HS) period. 404 */ 405 if (omap->speed > 400 || 406 omap->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK) 407 internal_clk = 19200; 408 else if (omap->speed > 100) 409 internal_clk = 9600; 410 else 411 internal_clk = 4000; 412 fclk = clk_get(omap->dev, "fck"); 413 fclk_rate = clk_get_rate(fclk) / 1000; 414 clk_put(fclk); 415 416 /* Compute prescaler divisor */ 417 psc = fclk_rate / internal_clk; 418 psc = psc - 1; 419 420 /* If configured for High Speed */ 421 if (omap->speed > 400) { 422 unsigned long scl; 423 424 /* For first phase of HS mode */ 425 scl = internal_clk / 400; 426 fsscll = scl - (scl / 3) - 7; 427 fssclh = (scl / 3) - 5; 428 429 /* For second phase of HS mode */ 430 scl = fclk_rate / omap->speed; 431 hsscll = scl - (scl / 3) - 7; 432 hssclh = (scl / 3) - 5; 433 } else if (omap->speed > 100) { 434 unsigned long scl; 435 436 /* Fast mode */ 437 scl = internal_clk / omap->speed; 438 fsscll = scl - (scl / 3) - 7; 439 fssclh = (scl / 3) - 5; 440 } else { 441 /* Standard mode */ 442 fsscll = internal_clk / (omap->speed * 2) - 7; 443 fssclh = internal_clk / (omap->speed * 2) - 5; 444 } 445 scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll; 446 sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh; 447 } else { 448 /* Program desired operating rate */ 449 fclk_rate /= (psc + 1) * 1000; 450 if (psc > 2) 451 psc = 2; 452 scll = fclk_rate / (omap->speed * 2) - 7 + psc; 453 sclh = fclk_rate / (omap->speed * 2) - 7 + psc; 454 } 455 456 omap->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY | 457 OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK | 458 OMAP_I2C_IE_AL) | ((omap->fifo_size) ? 459 (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0); 460 461 omap->pscstate = psc; 462 omap->scllstate = scll; 463 omap->sclhstate = sclh; 464 465 if (omap->rev <= OMAP_I2C_REV_ON_3430_3530) { 466 /* Not implemented */ 467 omap->bb_valid = 1; 468 } 469 470 __omap_i2c_init(omap); 471 472 return 0; 473 } 474 475 /* 476 * Waiting on Bus Busy 477 */ 478 static int omap_i2c_wait_for_bb(struct omap_i2c_dev *omap) 479 { 480 unsigned long timeout; 481 482 timeout = jiffies + OMAP_I2C_TIMEOUT; 483 while (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) { 484 if (time_after(jiffies, timeout)) 485 return i2c_recover_bus(&omap->adapter); 486 msleep(1); 487 } 488 489 return 0; 490 } 491 492 /* 493 * Wait while BB-bit doesn't reflect the I2C bus state 494 * 495 * In a multimaster environment, after IP software reset, BB-bit value doesn't 496 * correspond to the current bus state. It may happen what BB-bit will be 0, 497 * while the bus is busy due to another I2C master activity. 498 * Here are BB-bit values after reset: 499 * SDA SCL BB NOTES 500 * 0 0 0 1, 2 501 * 1 0 0 1, 2 502 * 0 1 1 503 * 1 1 0 3 504 * Later, if IP detect SDA=0 and SCL=1 (ACK) or SDA 1->0 while SCL=1 (START) 505 * combinations on the bus, it set BB-bit to 1. 506 * If IP detect SDA 0->1 while SCL=1 (STOP) combination on the bus, 507 * it set BB-bit to 0 and BF to 1. 508 * BB and BF bits correctly tracks the bus state while IP is suspended 509 * BB bit became valid on the next FCLK clock after CON_EN bit set 510 * 511 * NOTES: 512 * 1. Any transfer started when BB=0 and bus is busy wouldn't be 513 * completed by IP and results in controller timeout. 514 * 2. Any transfer started when BB=0 and SCL=0 results in IP 515 * starting to drive SDA low. In that case IP corrupt data 516 * on the bus. 517 * 3. Any transfer started in the middle of another master's transfer 518 * results in unpredictable results and data corruption 519 */ 520 static int omap_i2c_wait_for_bb_valid(struct omap_i2c_dev *omap) 521 { 522 unsigned long bus_free_timeout = 0; 523 unsigned long timeout; 524 int bus_free = 0; 525 u16 stat, systest; 526 527 if (omap->bb_valid) 528 return 0; 529 530 timeout = jiffies + OMAP_I2C_TIMEOUT; 531 while (1) { 532 stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); 533 /* 534 * We will see BB or BF event in a case IP had detected any 535 * activity on the I2C bus. Now IP correctly tracks the bus 536 * state. BB-bit value is valid. 537 */ 538 if (stat & (OMAP_I2C_STAT_BB | OMAP_I2C_STAT_BF)) 539 break; 540 541 /* 542 * Otherwise, we must look signals on the bus to make 543 * the right decision. 544 */ 545 systest = omap_i2c_read_reg(omap, OMAP_I2C_SYSTEST_REG); 546 if ((systest & OMAP_I2C_SYSTEST_SCL_I_FUNC) && 547 (systest & OMAP_I2C_SYSTEST_SDA_I_FUNC)) { 548 if (!bus_free) { 549 bus_free_timeout = jiffies + 550 OMAP_I2C_BUS_FREE_TIMEOUT; 551 bus_free = 1; 552 } 553 554 /* 555 * SDA and SCL lines was high for 10 ms without bus 556 * activity detected. The bus is free. Consider 557 * BB-bit value is valid. 558 */ 559 if (time_after(jiffies, bus_free_timeout)) 560 break; 561 } else { 562 bus_free = 0; 563 } 564 565 if (time_after(jiffies, timeout)) { 566 dev_warn(omap->dev, "timeout waiting for bus ready\n"); 567 return -ETIMEDOUT; 568 } 569 570 msleep(1); 571 } 572 573 omap->bb_valid = 1; 574 return 0; 575 } 576 577 static void omap_i2c_resize_fifo(struct omap_i2c_dev *omap, u8 size, bool is_rx) 578 { 579 u16 buf; 580 581 if (omap->flags & OMAP_I2C_FLAG_NO_FIFO) 582 return; 583 584 /* 585 * Set up notification threshold based on message size. We're doing 586 * this to try and avoid draining feature as much as possible. Whenever 587 * we have big messages to transfer (bigger than our total fifo size) 588 * then we might use draining feature to transfer the remaining bytes. 589 */ 590 591 omap->threshold = clamp(size, (u8) 1, omap->fifo_size); 592 593 buf = omap_i2c_read_reg(omap, OMAP_I2C_BUF_REG); 594 595 if (is_rx) { 596 /* Clear RX Threshold */ 597 buf &= ~(0x3f << 8); 598 buf |= ((omap->threshold - 1) << 8) | OMAP_I2C_BUF_RXFIF_CLR; 599 } else { 600 /* Clear TX Threshold */ 601 buf &= ~0x3f; 602 buf |= (omap->threshold - 1) | OMAP_I2C_BUF_TXFIF_CLR; 603 } 604 605 omap_i2c_write_reg(omap, OMAP_I2C_BUF_REG, buf); 606 607 if (omap->rev < OMAP_I2C_REV_ON_3630) 608 omap->b_hw = 1; /* Enable hardware fixes */ 609 610 /* calculate wakeup latency constraint for MPU */ 611 if (omap->set_mpu_wkup_lat != NULL) 612 omap->latency = (1000000 * omap->threshold) / 613 (1000 * omap->speed / 8); 614 } 615 616 /* 617 * Low level master read/write transaction. 618 */ 619 static int omap_i2c_xfer_msg(struct i2c_adapter *adap, 620 struct i2c_msg *msg, int stop) 621 { 622 struct omap_i2c_dev *omap = i2c_get_adapdata(adap); 623 unsigned long timeout; 624 u16 w; 625 626 dev_dbg(omap->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", 627 msg->addr, msg->len, msg->flags, stop); 628 629 if (msg->len == 0) 630 return -EINVAL; 631 632 omap->receiver = !!(msg->flags & I2C_M_RD); 633 omap_i2c_resize_fifo(omap, msg->len, omap->receiver); 634 635 omap_i2c_write_reg(omap, OMAP_I2C_SA_REG, msg->addr); 636 637 /* REVISIT: Could the STB bit of I2C_CON be used with probing? */ 638 omap->buf = msg->buf; 639 omap->buf_len = msg->len; 640 641 /* make sure writes to omap->buf_len are ordered */ 642 barrier(); 643 644 omap_i2c_write_reg(omap, OMAP_I2C_CNT_REG, omap->buf_len); 645 646 /* Clear the FIFO Buffers */ 647 w = omap_i2c_read_reg(omap, OMAP_I2C_BUF_REG); 648 w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR; 649 omap_i2c_write_reg(omap, OMAP_I2C_BUF_REG, w); 650 651 reinit_completion(&omap->cmd_complete); 652 omap->cmd_err = 0; 653 654 w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT; 655 656 /* High speed configuration */ 657 if (omap->speed > 400) 658 w |= OMAP_I2C_CON_OPMODE_HS; 659 660 if (msg->flags & I2C_M_STOP) 661 stop = 1; 662 if (msg->flags & I2C_M_TEN) 663 w |= OMAP_I2C_CON_XA; 664 if (!(msg->flags & I2C_M_RD)) 665 w |= OMAP_I2C_CON_TRX; 666 667 if (!omap->b_hw && stop) 668 w |= OMAP_I2C_CON_STP; 669 /* 670 * NOTE: STAT_BB bit could became 1 here if another master occupy 671 * the bus. IP successfully complete transfer when the bus will be 672 * free again (BB reset to 0). 673 */ 674 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w); 675 676 /* 677 * Don't write stt and stp together on some hardware. 678 */ 679 if (omap->b_hw && stop) { 680 unsigned long delay = jiffies + OMAP_I2C_TIMEOUT; 681 u16 con = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG); 682 while (con & OMAP_I2C_CON_STT) { 683 con = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG); 684 685 /* Let the user know if i2c is in a bad state */ 686 if (time_after(jiffies, delay)) { 687 dev_err(omap->dev, "controller timed out " 688 "waiting for start condition to finish\n"); 689 return -ETIMEDOUT; 690 } 691 cpu_relax(); 692 } 693 694 w |= OMAP_I2C_CON_STP; 695 w &= ~OMAP_I2C_CON_STT; 696 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w); 697 } 698 699 /* 700 * REVISIT: We should abort the transfer on signals, but the bus goes 701 * into arbitration and we're currently unable to recover from it. 702 */ 703 timeout = wait_for_completion_timeout(&omap->cmd_complete, 704 OMAP_I2C_TIMEOUT); 705 if (timeout == 0) { 706 dev_err(omap->dev, "controller timed out\n"); 707 omap_i2c_reset(omap); 708 __omap_i2c_init(omap); 709 return -ETIMEDOUT; 710 } 711 712 if (likely(!omap->cmd_err)) 713 return 0; 714 715 /* We have an error */ 716 if (omap->cmd_err & (OMAP_I2C_STAT_ROVR | OMAP_I2C_STAT_XUDF)) { 717 omap_i2c_reset(omap); 718 __omap_i2c_init(omap); 719 return -EIO; 720 } 721 722 if (omap->cmd_err & OMAP_I2C_STAT_AL) 723 return -EAGAIN; 724 725 if (omap->cmd_err & OMAP_I2C_STAT_NACK) { 726 if (msg->flags & I2C_M_IGNORE_NAK) 727 return 0; 728 729 w = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG); 730 w |= OMAP_I2C_CON_STP; 731 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w); 732 return -EREMOTEIO; 733 } 734 return -EIO; 735 } 736 737 738 /* 739 * Prepare controller for a transaction and call omap_i2c_xfer_msg 740 * to do the work during IRQ processing. 741 */ 742 static int 743 omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) 744 { 745 struct omap_i2c_dev *omap = i2c_get_adapdata(adap); 746 int i; 747 int r; 748 749 r = pm_runtime_get_sync(omap->dev); 750 if (r < 0) 751 goto out; 752 753 r = omap_i2c_wait_for_bb_valid(omap); 754 if (r < 0) 755 goto out; 756 757 r = omap_i2c_wait_for_bb(omap); 758 if (r < 0) 759 goto out; 760 761 if (omap->set_mpu_wkup_lat != NULL) 762 omap->set_mpu_wkup_lat(omap->dev, omap->latency); 763 764 for (i = 0; i < num; i++) { 765 r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); 766 if (r != 0) 767 break; 768 } 769 770 if (r == 0) 771 r = num; 772 773 omap_i2c_wait_for_bb(omap); 774 775 if (omap->set_mpu_wkup_lat != NULL) 776 omap->set_mpu_wkup_lat(omap->dev, -1); 777 778 out: 779 pm_runtime_mark_last_busy(omap->dev); 780 pm_runtime_put_autosuspend(omap->dev); 781 return r; 782 } 783 784 static u32 785 omap_i2c_func(struct i2c_adapter *adap) 786 { 787 return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | 788 I2C_FUNC_PROTOCOL_MANGLING; 789 } 790 791 static inline void 792 omap_i2c_complete_cmd(struct omap_i2c_dev *omap, u16 err) 793 { 794 omap->cmd_err |= err; 795 complete(&omap->cmd_complete); 796 } 797 798 static inline void 799 omap_i2c_ack_stat(struct omap_i2c_dev *omap, u16 stat) 800 { 801 omap_i2c_write_reg(omap, OMAP_I2C_STAT_REG, stat); 802 } 803 804 static inline void i2c_omap_errata_i207(struct omap_i2c_dev *omap, u16 stat) 805 { 806 /* 807 * I2C Errata(Errata Nos. OMAP2: 1.67, OMAP3: 1.8) 808 * Not applicable for OMAP4. 809 * Under certain rare conditions, RDR could be set again 810 * when the bus is busy, then ignore the interrupt and 811 * clear the interrupt. 812 */ 813 if (stat & OMAP_I2C_STAT_RDR) { 814 /* Step 1: If RDR is set, clear it */ 815 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR); 816 817 /* Step 2: */ 818 if (!(omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) 819 & OMAP_I2C_STAT_BB)) { 820 821 /* Step 3: */ 822 if (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) 823 & OMAP_I2C_STAT_RDR) { 824 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR); 825 dev_dbg(omap->dev, "RDR when bus is busy.\n"); 826 } 827 828 } 829 } 830 } 831 832 /* rev1 devices are apparently only on some 15xx */ 833 #ifdef CONFIG_ARCH_OMAP15XX 834 835 static irqreturn_t 836 omap_i2c_omap1_isr(int this_irq, void *dev_id) 837 { 838 struct omap_i2c_dev *omap = dev_id; 839 u16 iv, w; 840 841 if (pm_runtime_suspended(omap->dev)) 842 return IRQ_NONE; 843 844 iv = omap_i2c_read_reg(omap, OMAP_I2C_IV_REG); 845 switch (iv) { 846 case 0x00: /* None */ 847 break; 848 case 0x01: /* Arbitration lost */ 849 dev_err(omap->dev, "Arbitration lost\n"); 850 omap_i2c_complete_cmd(omap, OMAP_I2C_STAT_AL); 851 break; 852 case 0x02: /* No acknowledgement */ 853 omap_i2c_complete_cmd(omap, OMAP_I2C_STAT_NACK); 854 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP); 855 break; 856 case 0x03: /* Register access ready */ 857 omap_i2c_complete_cmd(omap, 0); 858 break; 859 case 0x04: /* Receive data ready */ 860 if (omap->buf_len) { 861 w = omap_i2c_read_reg(omap, OMAP_I2C_DATA_REG); 862 *omap->buf++ = w; 863 omap->buf_len--; 864 if (omap->buf_len) { 865 *omap->buf++ = w >> 8; 866 omap->buf_len--; 867 } 868 } else 869 dev_err(omap->dev, "RRDY IRQ while no data requested\n"); 870 break; 871 case 0x05: /* Transmit data ready */ 872 if (omap->buf_len) { 873 w = *omap->buf++; 874 omap->buf_len--; 875 if (omap->buf_len) { 876 w |= *omap->buf++ << 8; 877 omap->buf_len--; 878 } 879 omap_i2c_write_reg(omap, OMAP_I2C_DATA_REG, w); 880 } else 881 dev_err(omap->dev, "XRDY IRQ while no data to send\n"); 882 break; 883 default: 884 return IRQ_NONE; 885 } 886 887 return IRQ_HANDLED; 888 } 889 #else 890 #define omap_i2c_omap1_isr NULL 891 #endif 892 893 /* 894 * OMAP3430 Errata i462: When an XRDY/XDR is hit, wait for XUDF before writing 895 * data to DATA_REG. Otherwise some data bytes can be lost while transferring 896 * them from the memory to the I2C interface. 897 */ 898 static int errata_omap3_i462(struct omap_i2c_dev *omap) 899 { 900 unsigned long timeout = 10000; 901 u16 stat; 902 903 do { 904 stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); 905 if (stat & OMAP_I2C_STAT_XUDF) 906 break; 907 908 if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { 909 omap_i2c_ack_stat(omap, (OMAP_I2C_STAT_XRDY | 910 OMAP_I2C_STAT_XDR)); 911 if (stat & OMAP_I2C_STAT_NACK) { 912 omap->cmd_err |= OMAP_I2C_STAT_NACK; 913 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_NACK); 914 } 915 916 if (stat & OMAP_I2C_STAT_AL) { 917 dev_err(omap->dev, "Arbitration lost\n"); 918 omap->cmd_err |= OMAP_I2C_STAT_AL; 919 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_AL); 920 } 921 922 return -EIO; 923 } 924 925 cpu_relax(); 926 } while (--timeout); 927 928 if (!timeout) { 929 dev_err(omap->dev, "timeout waiting on XUDF bit\n"); 930 return 0; 931 } 932 933 return 0; 934 } 935 936 static void omap_i2c_receive_data(struct omap_i2c_dev *omap, u8 num_bytes, 937 bool is_rdr) 938 { 939 u16 w; 940 941 while (num_bytes--) { 942 w = omap_i2c_read_reg(omap, OMAP_I2C_DATA_REG); 943 *omap->buf++ = w; 944 omap->buf_len--; 945 946 /* 947 * Data reg in 2430, omap3 and 948 * omap4 is 8 bit wide 949 */ 950 if (omap->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) { 951 *omap->buf++ = w >> 8; 952 omap->buf_len--; 953 } 954 } 955 } 956 957 static int omap_i2c_transmit_data(struct omap_i2c_dev *omap, u8 num_bytes, 958 bool is_xdr) 959 { 960 u16 w; 961 962 while (num_bytes--) { 963 w = *omap->buf++; 964 omap->buf_len--; 965 966 /* 967 * Data reg in 2430, omap3 and 968 * omap4 is 8 bit wide 969 */ 970 if (omap->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) { 971 w |= *omap->buf++ << 8; 972 omap->buf_len--; 973 } 974 975 if (omap->errata & I2C_OMAP_ERRATA_I462) { 976 int ret; 977 978 ret = errata_omap3_i462(omap); 979 if (ret < 0) 980 return ret; 981 } 982 983 omap_i2c_write_reg(omap, OMAP_I2C_DATA_REG, w); 984 } 985 986 return 0; 987 } 988 989 static irqreturn_t 990 omap_i2c_isr(int irq, void *dev_id) 991 { 992 struct omap_i2c_dev *omap = dev_id; 993 irqreturn_t ret = IRQ_HANDLED; 994 u16 mask; 995 u16 stat; 996 997 stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); 998 mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); 999 1000 if (stat & mask) 1001 ret = IRQ_WAKE_THREAD; 1002 1003 return ret; 1004 } 1005 1006 static irqreturn_t 1007 omap_i2c_isr_thread(int this_irq, void *dev_id) 1008 { 1009 struct omap_i2c_dev *omap = dev_id; 1010 u16 bits; 1011 u16 stat; 1012 int err = 0, count = 0; 1013 1014 do { 1015 bits = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); 1016 stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); 1017 stat &= bits; 1018 1019 /* If we're in receiver mode, ignore XDR/XRDY */ 1020 if (omap->receiver) 1021 stat &= ~(OMAP_I2C_STAT_XDR | OMAP_I2C_STAT_XRDY); 1022 else 1023 stat &= ~(OMAP_I2C_STAT_RDR | OMAP_I2C_STAT_RRDY); 1024 1025 if (!stat) { 1026 /* my work here is done */ 1027 goto out; 1028 } 1029 1030 dev_dbg(omap->dev, "IRQ (ISR = 0x%04x)\n", stat); 1031 if (count++ == 100) { 1032 dev_warn(omap->dev, "Too much work in one IRQ\n"); 1033 break; 1034 } 1035 1036 if (stat & OMAP_I2C_STAT_NACK) { 1037 err |= OMAP_I2C_STAT_NACK; 1038 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_NACK); 1039 } 1040 1041 if (stat & OMAP_I2C_STAT_AL) { 1042 dev_err(omap->dev, "Arbitration lost\n"); 1043 err |= OMAP_I2C_STAT_AL; 1044 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_AL); 1045 } 1046 1047 /* 1048 * ProDB0017052: Clear ARDY bit twice 1049 */ 1050 if (stat & OMAP_I2C_STAT_ARDY) 1051 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_ARDY); 1052 1053 if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | 1054 OMAP_I2C_STAT_AL)) { 1055 omap_i2c_ack_stat(omap, (OMAP_I2C_STAT_RRDY | 1056 OMAP_I2C_STAT_RDR | 1057 OMAP_I2C_STAT_XRDY | 1058 OMAP_I2C_STAT_XDR | 1059 OMAP_I2C_STAT_ARDY)); 1060 break; 1061 } 1062 1063 if (stat & OMAP_I2C_STAT_RDR) { 1064 u8 num_bytes = 1; 1065 1066 if (omap->fifo_size) 1067 num_bytes = omap->buf_len; 1068 1069 if (omap->errata & I2C_OMAP_ERRATA_I207) { 1070 i2c_omap_errata_i207(omap, stat); 1071 num_bytes = (omap_i2c_read_reg(omap, 1072 OMAP_I2C_BUFSTAT_REG) >> 8) & 0x3F; 1073 } 1074 1075 omap_i2c_receive_data(omap, num_bytes, true); 1076 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR); 1077 continue; 1078 } 1079 1080 if (stat & OMAP_I2C_STAT_RRDY) { 1081 u8 num_bytes = 1; 1082 1083 if (omap->threshold) 1084 num_bytes = omap->threshold; 1085 1086 omap_i2c_receive_data(omap, num_bytes, false); 1087 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RRDY); 1088 continue; 1089 } 1090 1091 if (stat & OMAP_I2C_STAT_XDR) { 1092 u8 num_bytes = 1; 1093 int ret; 1094 1095 if (omap->fifo_size) 1096 num_bytes = omap->buf_len; 1097 1098 ret = omap_i2c_transmit_data(omap, num_bytes, true); 1099 if (ret < 0) 1100 break; 1101 1102 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XDR); 1103 continue; 1104 } 1105 1106 if (stat & OMAP_I2C_STAT_XRDY) { 1107 u8 num_bytes = 1; 1108 int ret; 1109 1110 if (omap->threshold) 1111 num_bytes = omap->threshold; 1112 1113 ret = omap_i2c_transmit_data(omap, num_bytes, false); 1114 if (ret < 0) 1115 break; 1116 1117 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XRDY); 1118 continue; 1119 } 1120 1121 if (stat & OMAP_I2C_STAT_ROVR) { 1122 dev_err(omap->dev, "Receive overrun\n"); 1123 err |= OMAP_I2C_STAT_ROVR; 1124 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_ROVR); 1125 break; 1126 } 1127 1128 if (stat & OMAP_I2C_STAT_XUDF) { 1129 dev_err(omap->dev, "Transmit underflow\n"); 1130 err |= OMAP_I2C_STAT_XUDF; 1131 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XUDF); 1132 break; 1133 } 1134 } while (stat); 1135 1136 omap_i2c_complete_cmd(omap, err); 1137 1138 out: 1139 return IRQ_HANDLED; 1140 } 1141 1142 static const struct i2c_algorithm omap_i2c_algo = { 1143 .master_xfer = omap_i2c_xfer, 1144 .functionality = omap_i2c_func, 1145 }; 1146 1147 #ifdef CONFIG_OF 1148 static struct omap_i2c_bus_platform_data omap2420_pdata = { 1149 .rev = OMAP_I2C_IP_VERSION_1, 1150 .flags = OMAP_I2C_FLAG_NO_FIFO | 1151 OMAP_I2C_FLAG_SIMPLE_CLOCK | 1152 OMAP_I2C_FLAG_16BIT_DATA_REG | 1153 OMAP_I2C_FLAG_BUS_SHIFT_2, 1154 }; 1155 1156 static struct omap_i2c_bus_platform_data omap2430_pdata = { 1157 .rev = OMAP_I2C_IP_VERSION_1, 1158 .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 | 1159 OMAP_I2C_FLAG_FORCE_19200_INT_CLK, 1160 }; 1161 1162 static struct omap_i2c_bus_platform_data omap3_pdata = { 1163 .rev = OMAP_I2C_IP_VERSION_1, 1164 .flags = OMAP_I2C_FLAG_BUS_SHIFT_2, 1165 }; 1166 1167 static struct omap_i2c_bus_platform_data omap4_pdata = { 1168 .rev = OMAP_I2C_IP_VERSION_2, 1169 }; 1170 1171 static const struct of_device_id omap_i2c_of_match[] = { 1172 { 1173 .compatible = "ti,omap4-i2c", 1174 .data = &omap4_pdata, 1175 }, 1176 { 1177 .compatible = "ti,omap3-i2c", 1178 .data = &omap3_pdata, 1179 }, 1180 { 1181 .compatible = "ti,omap2430-i2c", 1182 .data = &omap2430_pdata, 1183 }, 1184 { 1185 .compatible = "ti,omap2420-i2c", 1186 .data = &omap2420_pdata, 1187 }, 1188 { }, 1189 }; 1190 MODULE_DEVICE_TABLE(of, omap_i2c_of_match); 1191 #endif 1192 1193 #define OMAP_I2C_SCHEME(rev) ((rev & 0xc000) >> 14) 1194 1195 #define OMAP_I2C_REV_SCHEME_0_MAJOR(rev) (rev >> 4) 1196 #define OMAP_I2C_REV_SCHEME_0_MINOR(rev) (rev & 0xf) 1197 1198 #define OMAP_I2C_REV_SCHEME_1_MAJOR(rev) ((rev & 0x0700) >> 7) 1199 #define OMAP_I2C_REV_SCHEME_1_MINOR(rev) (rev & 0x1f) 1200 #define OMAP_I2C_SCHEME_0 0 1201 #define OMAP_I2C_SCHEME_1 1 1202 1203 static int omap_i2c_get_scl(struct i2c_adapter *adap) 1204 { 1205 struct omap_i2c_dev *dev = i2c_get_adapdata(adap); 1206 u32 reg; 1207 1208 reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG); 1209 1210 return reg & OMAP_I2C_SYSTEST_SCL_I_FUNC; 1211 } 1212 1213 static int omap_i2c_get_sda(struct i2c_adapter *adap) 1214 { 1215 struct omap_i2c_dev *dev = i2c_get_adapdata(adap); 1216 u32 reg; 1217 1218 reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG); 1219 1220 return reg & OMAP_I2C_SYSTEST_SDA_I_FUNC; 1221 } 1222 1223 static void omap_i2c_set_scl(struct i2c_adapter *adap, int val) 1224 { 1225 struct omap_i2c_dev *dev = i2c_get_adapdata(adap); 1226 u32 reg; 1227 1228 reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG); 1229 if (val) 1230 reg |= OMAP_I2C_SYSTEST_SCL_O; 1231 else 1232 reg &= ~OMAP_I2C_SYSTEST_SCL_O; 1233 omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg); 1234 } 1235 1236 static void omap_i2c_prepare_recovery(struct i2c_adapter *adap) 1237 { 1238 struct omap_i2c_dev *dev = i2c_get_adapdata(adap); 1239 u32 reg; 1240 1241 reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG); 1242 /* enable test mode */ 1243 reg |= OMAP_I2C_SYSTEST_ST_EN; 1244 /* select SDA/SCL IO mode */ 1245 reg |= 3 << OMAP_I2C_SYSTEST_TMODE_SHIFT; 1246 /* set SCL to high-impedance state (reset value is 0) */ 1247 reg |= OMAP_I2C_SYSTEST_SCL_O; 1248 /* set SDA to high-impedance state (reset value is 0) */ 1249 reg |= OMAP_I2C_SYSTEST_SDA_O; 1250 omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg); 1251 } 1252 1253 static void omap_i2c_unprepare_recovery(struct i2c_adapter *adap) 1254 { 1255 struct omap_i2c_dev *dev = i2c_get_adapdata(adap); 1256 u32 reg; 1257 1258 reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG); 1259 /* restore reset values */ 1260 reg &= ~OMAP_I2C_SYSTEST_ST_EN; 1261 reg &= ~OMAP_I2C_SYSTEST_TMODE_MASK; 1262 reg &= ~OMAP_I2C_SYSTEST_SCL_O; 1263 reg &= ~OMAP_I2C_SYSTEST_SDA_O; 1264 omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg); 1265 } 1266 1267 static struct i2c_bus_recovery_info omap_i2c_bus_recovery_info = { 1268 .get_scl = omap_i2c_get_scl, 1269 .get_sda = omap_i2c_get_sda, 1270 .set_scl = omap_i2c_set_scl, 1271 .prepare_recovery = omap_i2c_prepare_recovery, 1272 .unprepare_recovery = omap_i2c_unprepare_recovery, 1273 .recover_bus = i2c_generic_scl_recovery, 1274 }; 1275 1276 static int 1277 omap_i2c_probe(struct platform_device *pdev) 1278 { 1279 struct omap_i2c_dev *omap; 1280 struct i2c_adapter *adap; 1281 struct resource *mem; 1282 const struct omap_i2c_bus_platform_data *pdata = 1283 dev_get_platdata(&pdev->dev); 1284 struct device_node *node = pdev->dev.of_node; 1285 const struct of_device_id *match; 1286 int irq; 1287 int r; 1288 u32 rev; 1289 u16 minor, major; 1290 1291 irq = platform_get_irq(pdev, 0); 1292 if (irq < 0) { 1293 dev_err(&pdev->dev, "no irq resource?\n"); 1294 return irq; 1295 } 1296 1297 omap = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL); 1298 if (!omap) 1299 return -ENOMEM; 1300 1301 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1302 omap->base = devm_ioremap_resource(&pdev->dev, mem); 1303 if (IS_ERR(omap->base)) 1304 return PTR_ERR(omap->base); 1305 1306 match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev); 1307 if (match) { 1308 u32 freq = 100000; /* default to 100000 Hz */ 1309 1310 pdata = match->data; 1311 omap->flags = pdata->flags; 1312 1313 of_property_read_u32(node, "clock-frequency", &freq); 1314 /* convert DT freq value in Hz into kHz for speed */ 1315 omap->speed = freq / 1000; 1316 } else if (pdata != NULL) { 1317 omap->speed = pdata->clkrate; 1318 omap->flags = pdata->flags; 1319 omap->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; 1320 } 1321 1322 omap->dev = &pdev->dev; 1323 omap->irq = irq; 1324 1325 platform_set_drvdata(pdev, omap); 1326 init_completion(&omap->cmd_complete); 1327 1328 omap->reg_shift = (omap->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3; 1329 1330 pm_runtime_enable(omap->dev); 1331 pm_runtime_set_autosuspend_delay(omap->dev, OMAP_I2C_PM_TIMEOUT); 1332 pm_runtime_use_autosuspend(omap->dev); 1333 1334 r = pm_runtime_get_sync(omap->dev); 1335 if (r < 0) 1336 goto err_free_mem; 1337 1338 /* 1339 * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2. 1340 * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset. 1341 * Also since the omap_i2c_read_reg uses reg_map_ip_* a 1342 * readw_relaxed is done. 1343 */ 1344 rev = readw_relaxed(omap->base + 0x04); 1345 1346 omap->scheme = OMAP_I2C_SCHEME(rev); 1347 switch (omap->scheme) { 1348 case OMAP_I2C_SCHEME_0: 1349 omap->regs = (u8 *)reg_map_ip_v1; 1350 omap->rev = omap_i2c_read_reg(omap, OMAP_I2C_REV_REG); 1351 minor = OMAP_I2C_REV_SCHEME_0_MAJOR(omap->rev); 1352 major = OMAP_I2C_REV_SCHEME_0_MAJOR(omap->rev); 1353 break; 1354 case OMAP_I2C_SCHEME_1: 1355 /* FALLTHROUGH */ 1356 default: 1357 omap->regs = (u8 *)reg_map_ip_v2; 1358 rev = (rev << 16) | 1359 omap_i2c_read_reg(omap, OMAP_I2C_IP_V2_REVNB_LO); 1360 minor = OMAP_I2C_REV_SCHEME_1_MINOR(rev); 1361 major = OMAP_I2C_REV_SCHEME_1_MAJOR(rev); 1362 omap->rev = rev; 1363 } 1364 1365 omap->errata = 0; 1366 1367 if (omap->rev >= OMAP_I2C_REV_ON_2430 && 1368 omap->rev < OMAP_I2C_REV_ON_4430_PLUS) 1369 omap->errata |= I2C_OMAP_ERRATA_I207; 1370 1371 if (omap->rev <= OMAP_I2C_REV_ON_3430_3530) 1372 omap->errata |= I2C_OMAP_ERRATA_I462; 1373 1374 if (!(omap->flags & OMAP_I2C_FLAG_NO_FIFO)) { 1375 u16 s; 1376 1377 /* Set up the fifo size - Get total size */ 1378 s = (omap_i2c_read_reg(omap, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3; 1379 omap->fifo_size = 0x8 << s; 1380 1381 /* 1382 * Set up notification threshold as half the total available 1383 * size. This is to ensure that we can handle the status on int 1384 * call back latencies. 1385 */ 1386 1387 omap->fifo_size = (omap->fifo_size / 2); 1388 1389 if (omap->rev < OMAP_I2C_REV_ON_3630) 1390 omap->b_hw = 1; /* Enable hardware fixes */ 1391 1392 /* calculate wakeup latency constraint for MPU */ 1393 if (omap->set_mpu_wkup_lat != NULL) 1394 omap->latency = (1000000 * omap->fifo_size) / 1395 (1000 * omap->speed / 8); 1396 } 1397 1398 /* reset ASAP, clearing any IRQs */ 1399 omap_i2c_init(omap); 1400 1401 if (omap->rev < OMAP_I2C_OMAP1_REV_2) 1402 r = devm_request_irq(&pdev->dev, omap->irq, omap_i2c_omap1_isr, 1403 IRQF_NO_SUSPEND, pdev->name, omap); 1404 else 1405 r = devm_request_threaded_irq(&pdev->dev, omap->irq, 1406 omap_i2c_isr, omap_i2c_isr_thread, 1407 IRQF_NO_SUSPEND | IRQF_ONESHOT, 1408 pdev->name, omap); 1409 1410 if (r) { 1411 dev_err(omap->dev, "failure requesting irq %i\n", omap->irq); 1412 goto err_unuse_clocks; 1413 } 1414 1415 adap = &omap->adapter; 1416 i2c_set_adapdata(adap, omap); 1417 adap->owner = THIS_MODULE; 1418 adap->class = I2C_CLASS_DEPRECATED; 1419 strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name)); 1420 adap->algo = &omap_i2c_algo; 1421 adap->dev.parent = &pdev->dev; 1422 adap->dev.of_node = pdev->dev.of_node; 1423 adap->bus_recovery_info = &omap_i2c_bus_recovery_info; 1424 1425 /* i2c device drivers may be active on return from add_adapter() */ 1426 adap->nr = pdev->id; 1427 r = i2c_add_numbered_adapter(adap); 1428 if (r) { 1429 dev_err(omap->dev, "failure adding adapter\n"); 1430 goto err_unuse_clocks; 1431 } 1432 1433 dev_info(omap->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr, 1434 major, minor, omap->speed); 1435 1436 pm_runtime_mark_last_busy(omap->dev); 1437 pm_runtime_put_autosuspend(omap->dev); 1438 1439 return 0; 1440 1441 err_unuse_clocks: 1442 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0); 1443 pm_runtime_dont_use_autosuspend(omap->dev); 1444 pm_runtime_put_sync(omap->dev); 1445 pm_runtime_disable(&pdev->dev); 1446 err_free_mem: 1447 1448 return r; 1449 } 1450 1451 static int omap_i2c_remove(struct platform_device *pdev) 1452 { 1453 struct omap_i2c_dev *omap = platform_get_drvdata(pdev); 1454 int ret; 1455 1456 i2c_del_adapter(&omap->adapter); 1457 ret = pm_runtime_get_sync(&pdev->dev); 1458 if (ret < 0) 1459 return ret; 1460 1461 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0); 1462 pm_runtime_dont_use_autosuspend(&pdev->dev); 1463 pm_runtime_put_sync(&pdev->dev); 1464 pm_runtime_disable(&pdev->dev); 1465 return 0; 1466 } 1467 1468 #ifdef CONFIG_PM 1469 static int omap_i2c_runtime_suspend(struct device *dev) 1470 { 1471 struct omap_i2c_dev *omap = dev_get_drvdata(dev); 1472 1473 omap->iestate = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); 1474 1475 if (omap->scheme == OMAP_I2C_SCHEME_0) 1476 omap_i2c_write_reg(omap, OMAP_I2C_IE_REG, 0); 1477 else 1478 omap_i2c_write_reg(omap, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1479 OMAP_I2C_IP_V2_INTERRUPTS_MASK); 1480 1481 if (omap->rev < OMAP_I2C_OMAP1_REV_2) { 1482 omap_i2c_read_reg(omap, OMAP_I2C_IV_REG); /* Read clears */ 1483 } else { 1484 omap_i2c_write_reg(omap, OMAP_I2C_STAT_REG, omap->iestate); 1485 1486 /* Flush posted write */ 1487 omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); 1488 } 1489 1490 pinctrl_pm_select_sleep_state(dev); 1491 1492 return 0; 1493 } 1494 1495 static int omap_i2c_runtime_resume(struct device *dev) 1496 { 1497 struct omap_i2c_dev *omap = dev_get_drvdata(dev); 1498 1499 pinctrl_pm_select_default_state(dev); 1500 1501 if (!omap->regs) 1502 return 0; 1503 1504 __omap_i2c_init(omap); 1505 1506 return 0; 1507 } 1508 1509 static struct dev_pm_ops omap_i2c_pm_ops = { 1510 SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend, 1511 omap_i2c_runtime_resume, NULL) 1512 }; 1513 #define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops) 1514 #else 1515 #define OMAP_I2C_PM_OPS NULL 1516 #endif /* CONFIG_PM */ 1517 1518 static struct platform_driver omap_i2c_driver = { 1519 .probe = omap_i2c_probe, 1520 .remove = omap_i2c_remove, 1521 .driver = { 1522 .name = "omap_i2c", 1523 .pm = OMAP_I2C_PM_OPS, 1524 .of_match_table = of_match_ptr(omap_i2c_of_match), 1525 }, 1526 }; 1527 1528 /* I2C may be needed to bring up other drivers */ 1529 static int __init 1530 omap_i2c_init_driver(void) 1531 { 1532 return platform_driver_register(&omap_i2c_driver); 1533 } 1534 subsys_initcall(omap_i2c_init_driver); 1535 1536 static void __exit omap_i2c_exit_driver(void) 1537 { 1538 platform_driver_unregister(&omap_i2c_driver); 1539 } 1540 module_exit(omap_i2c_exit_driver); 1541 1542 MODULE_AUTHOR("MontaVista Software, Inc. (and others)"); 1543 MODULE_DESCRIPTION("TI OMAP I2C bus adapter"); 1544 MODULE_LICENSE("GPL"); 1545 MODULE_ALIAS("platform:omap_i2c"); 1546