1 /* 2 * TI OMAP I2C master mode driver 3 * 4 * Copyright (C) 2003 MontaVista Software, Inc. 5 * Copyright (C) 2005 Nokia Corporation 6 * Copyright (C) 2004 - 2007 Texas Instruments. 7 * 8 * Originally written by MontaVista Software, Inc. 9 * Additional contributions by: 10 * Tony Lindgren <tony@atomide.com> 11 * Imre Deak <imre.deak@nokia.com> 12 * Juha Yrjölä <juha.yrjola@solidboot.com> 13 * Syed Khasim <x0khasim@ti.com> 14 * Nishant Menon <nm@ti.com> 15 * 16 * This program is free software; you can redistribute it and/or modify 17 * it under the terms of the GNU General Public License as published by 18 * the Free Software Foundation; either version 2 of the License, or 19 * (at your option) any later version. 20 * 21 * This program is distributed in the hope that it will be useful, 22 * but WITHOUT ANY WARRANTY; without even the implied warranty of 23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 24 * GNU General Public License for more details. 25 * 26 * You should have received a copy of the GNU General Public License 27 * along with this program; if not, write to the Free Software 28 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 29 */ 30 31 #include <linux/module.h> 32 #include <linux/delay.h> 33 #include <linux/i2c.h> 34 #include <linux/err.h> 35 #include <linux/interrupt.h> 36 #include <linux/completion.h> 37 #include <linux/platform_device.h> 38 #include <linux/clk.h> 39 #include <linux/io.h> 40 #include <linux/of.h> 41 #include <linux/of_device.h> 42 #include <linux/slab.h> 43 #include <linux/i2c-omap.h> 44 #include <linux/pm_runtime.h> 45 46 /* I2C controller revisions */ 47 #define OMAP_I2C_OMAP1_REV_2 0x20 48 49 /* I2C controller revisions present on specific hardware */ 50 #define OMAP_I2C_REV_ON_2430 0x00000036 51 #define OMAP_I2C_REV_ON_3430_3530 0x0000003C 52 #define OMAP_I2C_REV_ON_3630 0x00000040 53 #define OMAP_I2C_REV_ON_4430_PLUS 0x50400002 54 55 /* timeout waiting for the controller to respond */ 56 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000)) 57 58 /* timeout for pm runtime autosuspend */ 59 #define OMAP_I2C_PM_TIMEOUT 1000 /* ms */ 60 61 /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */ 62 enum { 63 OMAP_I2C_REV_REG = 0, 64 OMAP_I2C_IE_REG, 65 OMAP_I2C_STAT_REG, 66 OMAP_I2C_IV_REG, 67 OMAP_I2C_WE_REG, 68 OMAP_I2C_SYSS_REG, 69 OMAP_I2C_BUF_REG, 70 OMAP_I2C_CNT_REG, 71 OMAP_I2C_DATA_REG, 72 OMAP_I2C_SYSC_REG, 73 OMAP_I2C_CON_REG, 74 OMAP_I2C_OA_REG, 75 OMAP_I2C_SA_REG, 76 OMAP_I2C_PSC_REG, 77 OMAP_I2C_SCLL_REG, 78 OMAP_I2C_SCLH_REG, 79 OMAP_I2C_SYSTEST_REG, 80 OMAP_I2C_BUFSTAT_REG, 81 /* only on OMAP4430 */ 82 OMAP_I2C_IP_V2_REVNB_LO, 83 OMAP_I2C_IP_V2_REVNB_HI, 84 OMAP_I2C_IP_V2_IRQSTATUS_RAW, 85 OMAP_I2C_IP_V2_IRQENABLE_SET, 86 OMAP_I2C_IP_V2_IRQENABLE_CLR, 87 }; 88 89 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */ 90 #define OMAP_I2C_IE_XDR (1 << 14) /* TX Buffer drain int enable */ 91 #define OMAP_I2C_IE_RDR (1 << 13) /* RX Buffer drain int enable */ 92 #define OMAP_I2C_IE_XRDY (1 << 4) /* TX data ready int enable */ 93 #define OMAP_I2C_IE_RRDY (1 << 3) /* RX data ready int enable */ 94 #define OMAP_I2C_IE_ARDY (1 << 2) /* Access ready int enable */ 95 #define OMAP_I2C_IE_NACK (1 << 1) /* No ack interrupt enable */ 96 #define OMAP_I2C_IE_AL (1 << 0) /* Arbitration lost int ena */ 97 98 /* I2C Status Register (OMAP_I2C_STAT): */ 99 #define OMAP_I2C_STAT_XDR (1 << 14) /* TX Buffer draining */ 100 #define OMAP_I2C_STAT_RDR (1 << 13) /* RX Buffer draining */ 101 #define OMAP_I2C_STAT_BB (1 << 12) /* Bus busy */ 102 #define OMAP_I2C_STAT_ROVR (1 << 11) /* Receive overrun */ 103 #define OMAP_I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ 104 #define OMAP_I2C_STAT_AAS (1 << 9) /* Address as slave */ 105 #define OMAP_I2C_STAT_AD0 (1 << 8) /* Address zero */ 106 #define OMAP_I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ 107 #define OMAP_I2C_STAT_RRDY (1 << 3) /* Receive data ready */ 108 #define OMAP_I2C_STAT_ARDY (1 << 2) /* Register access ready */ 109 #define OMAP_I2C_STAT_NACK (1 << 1) /* No ack interrupt enable */ 110 #define OMAP_I2C_STAT_AL (1 << 0) /* Arbitration lost int ena */ 111 112 /* I2C WE wakeup enable register */ 113 #define OMAP_I2C_WE_XDR_WE (1 << 14) /* TX drain wakup */ 114 #define OMAP_I2C_WE_RDR_WE (1 << 13) /* RX drain wakeup */ 115 #define OMAP_I2C_WE_AAS_WE (1 << 9) /* Address as slave wakeup*/ 116 #define OMAP_I2C_WE_BF_WE (1 << 8) /* Bus free wakeup */ 117 #define OMAP_I2C_WE_STC_WE (1 << 6) /* Start condition wakeup */ 118 #define OMAP_I2C_WE_GC_WE (1 << 5) /* General call wakeup */ 119 #define OMAP_I2C_WE_DRDY_WE (1 << 3) /* TX/RX data ready wakeup */ 120 #define OMAP_I2C_WE_ARDY_WE (1 << 2) /* Reg access ready wakeup */ 121 #define OMAP_I2C_WE_NACK_WE (1 << 1) /* No acknowledgment wakeup */ 122 #define OMAP_I2C_WE_AL_WE (1 << 0) /* Arbitration lost wakeup */ 123 124 #define OMAP_I2C_WE_ALL (OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \ 125 OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \ 126 OMAP_I2C_WE_STC_WE | OMAP_I2C_WE_GC_WE | \ 127 OMAP_I2C_WE_DRDY_WE | OMAP_I2C_WE_ARDY_WE | \ 128 OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE) 129 130 /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */ 131 #define OMAP_I2C_BUF_RDMA_EN (1 << 15) /* RX DMA channel enable */ 132 #define OMAP_I2C_BUF_RXFIF_CLR (1 << 14) /* RX FIFO Clear */ 133 #define OMAP_I2C_BUF_XDMA_EN (1 << 7) /* TX DMA channel enable */ 134 #define OMAP_I2C_BUF_TXFIF_CLR (1 << 6) /* TX FIFO Clear */ 135 136 /* I2C Configuration Register (OMAP_I2C_CON): */ 137 #define OMAP_I2C_CON_EN (1 << 15) /* I2C module enable */ 138 #define OMAP_I2C_CON_BE (1 << 14) /* Big endian mode */ 139 #define OMAP_I2C_CON_OPMODE_HS (1 << 12) /* High Speed support */ 140 #define OMAP_I2C_CON_STB (1 << 11) /* Start byte mode (master) */ 141 #define OMAP_I2C_CON_MST (1 << 10) /* Master/slave mode */ 142 #define OMAP_I2C_CON_TRX (1 << 9) /* TX/RX mode (master only) */ 143 #define OMAP_I2C_CON_XA (1 << 8) /* Expand address */ 144 #define OMAP_I2C_CON_RM (1 << 2) /* Repeat mode (master only) */ 145 #define OMAP_I2C_CON_STP (1 << 1) /* Stop cond (master only) */ 146 #define OMAP_I2C_CON_STT (1 << 0) /* Start condition (master) */ 147 148 /* I2C SCL time value when Master */ 149 #define OMAP_I2C_SCLL_HSSCLL 8 150 #define OMAP_I2C_SCLH_HSSCLH 8 151 152 /* I2C System Test Register (OMAP_I2C_SYSTEST): */ 153 #ifdef DEBUG 154 #define OMAP_I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ 155 #define OMAP_I2C_SYSTEST_FREE (1 << 14) /* Free running mode */ 156 #define OMAP_I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ 157 #define OMAP_I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ 158 #define OMAP_I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense in */ 159 #define OMAP_I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive out */ 160 #define OMAP_I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense in */ 161 #define OMAP_I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive out */ 162 #endif 163 164 /* OCP_SYSSTATUS bit definitions */ 165 #define SYSS_RESETDONE_MASK (1 << 0) 166 167 /* OCP_SYSCONFIG bit definitions */ 168 #define SYSC_CLOCKACTIVITY_MASK (0x3 << 8) 169 #define SYSC_SIDLEMODE_MASK (0x3 << 3) 170 #define SYSC_ENAWAKEUP_MASK (1 << 2) 171 #define SYSC_SOFTRESET_MASK (1 << 1) 172 #define SYSC_AUTOIDLE_MASK (1 << 0) 173 174 #define SYSC_IDLEMODE_SMART 0x2 175 #define SYSC_CLOCKACTIVITY_FCLK 0x2 176 177 /* Errata definitions */ 178 #define I2C_OMAP_ERRATA_I207 (1 << 0) 179 #define I2C_OMAP_ERRATA_I462 (1 << 1) 180 181 #define OMAP_I2C_IP_V2_INTERRUPTS_MASK 0x6FFF 182 183 struct omap_i2c_dev { 184 spinlock_t lock; /* IRQ synchronization */ 185 struct device *dev; 186 void __iomem *base; /* virtual */ 187 int irq; 188 int reg_shift; /* bit shift for I2C register addresses */ 189 struct completion cmd_complete; 190 struct resource *ioarea; 191 u32 latency; /* maximum mpu wkup latency */ 192 void (*set_mpu_wkup_lat)(struct device *dev, 193 long latency); 194 u32 speed; /* Speed of bus in kHz */ 195 u32 flags; 196 u16 scheme; 197 u16 cmd_err; 198 u8 *buf; 199 u8 *regs; 200 size_t buf_len; 201 struct i2c_adapter adapter; 202 u8 threshold; 203 u8 fifo_size; /* use as flag and value 204 * fifo_size==0 implies no fifo 205 * if set, should be trsh+1 206 */ 207 u32 rev; 208 unsigned b_hw:1; /* bad h/w fixes */ 209 unsigned receiver:1; /* true when we're in receiver mode */ 210 u16 iestate; /* Saved interrupt register */ 211 u16 pscstate; 212 u16 scllstate; 213 u16 sclhstate; 214 u16 syscstate; 215 u16 westate; 216 u16 errata; 217 }; 218 219 static const u8 reg_map_ip_v1[] = { 220 [OMAP_I2C_REV_REG] = 0x00, 221 [OMAP_I2C_IE_REG] = 0x01, 222 [OMAP_I2C_STAT_REG] = 0x02, 223 [OMAP_I2C_IV_REG] = 0x03, 224 [OMAP_I2C_WE_REG] = 0x03, 225 [OMAP_I2C_SYSS_REG] = 0x04, 226 [OMAP_I2C_BUF_REG] = 0x05, 227 [OMAP_I2C_CNT_REG] = 0x06, 228 [OMAP_I2C_DATA_REG] = 0x07, 229 [OMAP_I2C_SYSC_REG] = 0x08, 230 [OMAP_I2C_CON_REG] = 0x09, 231 [OMAP_I2C_OA_REG] = 0x0a, 232 [OMAP_I2C_SA_REG] = 0x0b, 233 [OMAP_I2C_PSC_REG] = 0x0c, 234 [OMAP_I2C_SCLL_REG] = 0x0d, 235 [OMAP_I2C_SCLH_REG] = 0x0e, 236 [OMAP_I2C_SYSTEST_REG] = 0x0f, 237 [OMAP_I2C_BUFSTAT_REG] = 0x10, 238 }; 239 240 static const u8 reg_map_ip_v2[] = { 241 [OMAP_I2C_REV_REG] = 0x04, 242 [OMAP_I2C_IE_REG] = 0x2c, 243 [OMAP_I2C_STAT_REG] = 0x28, 244 [OMAP_I2C_IV_REG] = 0x34, 245 [OMAP_I2C_WE_REG] = 0x34, 246 [OMAP_I2C_SYSS_REG] = 0x90, 247 [OMAP_I2C_BUF_REG] = 0x94, 248 [OMAP_I2C_CNT_REG] = 0x98, 249 [OMAP_I2C_DATA_REG] = 0x9c, 250 [OMAP_I2C_SYSC_REG] = 0x10, 251 [OMAP_I2C_CON_REG] = 0xa4, 252 [OMAP_I2C_OA_REG] = 0xa8, 253 [OMAP_I2C_SA_REG] = 0xac, 254 [OMAP_I2C_PSC_REG] = 0xb0, 255 [OMAP_I2C_SCLL_REG] = 0xb4, 256 [OMAP_I2C_SCLH_REG] = 0xb8, 257 [OMAP_I2C_SYSTEST_REG] = 0xbC, 258 [OMAP_I2C_BUFSTAT_REG] = 0xc0, 259 [OMAP_I2C_IP_V2_REVNB_LO] = 0x00, 260 [OMAP_I2C_IP_V2_REVNB_HI] = 0x04, 261 [OMAP_I2C_IP_V2_IRQSTATUS_RAW] = 0x24, 262 [OMAP_I2C_IP_V2_IRQENABLE_SET] = 0x2c, 263 [OMAP_I2C_IP_V2_IRQENABLE_CLR] = 0x30, 264 }; 265 266 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev, 267 int reg, u16 val) 268 { 269 __raw_writew(val, i2c_dev->base + 270 (i2c_dev->regs[reg] << i2c_dev->reg_shift)); 271 } 272 273 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) 274 { 275 return __raw_readw(i2c_dev->base + 276 (i2c_dev->regs[reg] << i2c_dev->reg_shift)); 277 } 278 279 static void __omap_i2c_init(struct omap_i2c_dev *dev) 280 { 281 282 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); 283 284 /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */ 285 omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate); 286 287 /* SCL low and high time values */ 288 omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate); 289 omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate); 290 if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) 291 omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate); 292 293 /* Take the I2C module out of reset: */ 294 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); 295 296 /* 297 * Don't write to this register if the IE state is 0 as it can 298 * cause deadlock. 299 */ 300 if (dev->iestate) 301 omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); 302 } 303 304 static int omap_i2c_reset(struct omap_i2c_dev *dev) 305 { 306 unsigned long timeout; 307 u16 sysc; 308 309 if (dev->rev >= OMAP_I2C_OMAP1_REV_2) { 310 sysc = omap_i2c_read_reg(dev, OMAP_I2C_SYSC_REG); 311 312 /* Disable I2C controller before soft reset */ 313 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 314 omap_i2c_read_reg(dev, OMAP_I2C_CON_REG) & 315 ~(OMAP_I2C_CON_EN)); 316 317 omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK); 318 /* For some reason we need to set the EN bit before the 319 * reset done bit gets set. */ 320 timeout = jiffies + OMAP_I2C_TIMEOUT; 321 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); 322 while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) & 323 SYSS_RESETDONE_MASK)) { 324 if (time_after(jiffies, timeout)) { 325 dev_warn(dev->dev, "timeout waiting " 326 "for controller reset\n"); 327 return -ETIMEDOUT; 328 } 329 msleep(1); 330 } 331 332 /* SYSC register is cleared by the reset; rewrite it */ 333 omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, sysc); 334 335 } 336 return 0; 337 } 338 339 static int omap_i2c_init(struct omap_i2c_dev *dev) 340 { 341 u16 psc = 0, scll = 0, sclh = 0; 342 u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0; 343 unsigned long fclk_rate = 12000000; 344 unsigned long internal_clk = 0; 345 struct clk *fclk; 346 347 if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) { 348 /* 349 * Enabling all wakup sources to stop I2C freezing on 350 * WFI instruction. 351 * REVISIT: Some wkup sources might not be needed. 352 */ 353 dev->westate = OMAP_I2C_WE_ALL; 354 } 355 356 if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) { 357 /* 358 * The I2C functional clock is the armxor_ck, so there's 359 * no need to get "armxor_ck" separately. Now, if OMAP2420 360 * always returns 12MHz for the functional clock, we can 361 * do this bit unconditionally. 362 */ 363 fclk = clk_get(dev->dev, "fck"); 364 fclk_rate = clk_get_rate(fclk); 365 clk_put(fclk); 366 367 /* TRM for 5912 says the I2C clock must be prescaled to be 368 * between 7 - 12 MHz. The XOR input clock is typically 369 * 12, 13 or 19.2 MHz. So we should have code that produces: 370 * 371 * XOR MHz Divider Prescaler 372 * 12 1 0 373 * 13 2 1 374 * 19.2 2 1 375 */ 376 if (fclk_rate > 12000000) 377 psc = fclk_rate / 12000000; 378 } 379 380 if (!(dev->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) { 381 382 /* 383 * HSI2C controller internal clk rate should be 19.2 Mhz for 384 * HS and for all modes on 2430. On 34xx we can use lower rate 385 * to get longer filter period for better noise suppression. 386 * The filter is iclk (fclk for HS) period. 387 */ 388 if (dev->speed > 400 || 389 dev->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK) 390 internal_clk = 19200; 391 else if (dev->speed > 100) 392 internal_clk = 9600; 393 else 394 internal_clk = 4000; 395 fclk = clk_get(dev->dev, "fck"); 396 fclk_rate = clk_get_rate(fclk) / 1000; 397 clk_put(fclk); 398 399 /* Compute prescaler divisor */ 400 psc = fclk_rate / internal_clk; 401 psc = psc - 1; 402 403 /* If configured for High Speed */ 404 if (dev->speed > 400) { 405 unsigned long scl; 406 407 /* For first phase of HS mode */ 408 scl = internal_clk / 400; 409 fsscll = scl - (scl / 3) - 7; 410 fssclh = (scl / 3) - 5; 411 412 /* For second phase of HS mode */ 413 scl = fclk_rate / dev->speed; 414 hsscll = scl - (scl / 3) - 7; 415 hssclh = (scl / 3) - 5; 416 } else if (dev->speed > 100) { 417 unsigned long scl; 418 419 /* Fast mode */ 420 scl = internal_clk / dev->speed; 421 fsscll = scl - (scl / 3) - 7; 422 fssclh = (scl / 3) - 5; 423 } else { 424 /* Standard mode */ 425 fsscll = internal_clk / (dev->speed * 2) - 7; 426 fssclh = internal_clk / (dev->speed * 2) - 5; 427 } 428 scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll; 429 sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh; 430 } else { 431 /* Program desired operating rate */ 432 fclk_rate /= (psc + 1) * 1000; 433 if (psc > 2) 434 psc = 2; 435 scll = fclk_rate / (dev->speed * 2) - 7 + psc; 436 sclh = fclk_rate / (dev->speed * 2) - 7 + psc; 437 } 438 439 dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY | 440 OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK | 441 OMAP_I2C_IE_AL) | ((dev->fifo_size) ? 442 (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0); 443 444 dev->pscstate = psc; 445 dev->scllstate = scll; 446 dev->sclhstate = sclh; 447 448 __omap_i2c_init(dev); 449 450 return 0; 451 } 452 453 /* 454 * Waiting on Bus Busy 455 */ 456 static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev) 457 { 458 unsigned long timeout; 459 460 timeout = jiffies + OMAP_I2C_TIMEOUT; 461 while (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) { 462 if (time_after(jiffies, timeout)) { 463 dev_warn(dev->dev, "timeout waiting for bus ready\n"); 464 return -ETIMEDOUT; 465 } 466 msleep(1); 467 } 468 469 return 0; 470 } 471 472 static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx) 473 { 474 u16 buf; 475 476 if (dev->flags & OMAP_I2C_FLAG_NO_FIFO) 477 return; 478 479 /* 480 * Set up notification threshold based on message size. We're doing 481 * this to try and avoid draining feature as much as possible. Whenever 482 * we have big messages to transfer (bigger than our total fifo size) 483 * then we might use draining feature to transfer the remaining bytes. 484 */ 485 486 dev->threshold = clamp(size, (u8) 1, dev->fifo_size); 487 488 buf = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG); 489 490 if (is_rx) { 491 /* Clear RX Threshold */ 492 buf &= ~(0x3f << 8); 493 buf |= ((dev->threshold - 1) << 8) | OMAP_I2C_BUF_RXFIF_CLR; 494 } else { 495 /* Clear TX Threshold */ 496 buf &= ~0x3f; 497 buf |= (dev->threshold - 1) | OMAP_I2C_BUF_TXFIF_CLR; 498 } 499 500 omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, buf); 501 502 if (dev->rev < OMAP_I2C_REV_ON_3630) 503 dev->b_hw = 1; /* Enable hardware fixes */ 504 505 /* calculate wakeup latency constraint for MPU */ 506 if (dev->set_mpu_wkup_lat != NULL) 507 dev->latency = (1000000 * dev->threshold) / 508 (1000 * dev->speed / 8); 509 } 510 511 /* 512 * Low level master read/write transaction. 513 */ 514 static int omap_i2c_xfer_msg(struct i2c_adapter *adap, 515 struct i2c_msg *msg, int stop) 516 { 517 struct omap_i2c_dev *dev = i2c_get_adapdata(adap); 518 unsigned long timeout; 519 u16 w; 520 521 dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", 522 msg->addr, msg->len, msg->flags, stop); 523 524 if (msg->len == 0) 525 return -EINVAL; 526 527 dev->receiver = !!(msg->flags & I2C_M_RD); 528 omap_i2c_resize_fifo(dev, msg->len, dev->receiver); 529 530 omap_i2c_write_reg(dev, OMAP_I2C_SA_REG, msg->addr); 531 532 /* REVISIT: Could the STB bit of I2C_CON be used with probing? */ 533 dev->buf = msg->buf; 534 dev->buf_len = msg->len; 535 536 /* make sure writes to dev->buf_len are ordered */ 537 barrier(); 538 539 omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len); 540 541 /* Clear the FIFO Buffers */ 542 w = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG); 543 w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR; 544 omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w); 545 546 INIT_COMPLETION(dev->cmd_complete); 547 dev->cmd_err = 0; 548 549 w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT; 550 551 /* High speed configuration */ 552 if (dev->speed > 400) 553 w |= OMAP_I2C_CON_OPMODE_HS; 554 555 if (msg->flags & I2C_M_STOP) 556 stop = 1; 557 if (msg->flags & I2C_M_TEN) 558 w |= OMAP_I2C_CON_XA; 559 if (!(msg->flags & I2C_M_RD)) 560 w |= OMAP_I2C_CON_TRX; 561 562 if (!dev->b_hw && stop) 563 w |= OMAP_I2C_CON_STP; 564 565 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); 566 567 /* 568 * Don't write stt and stp together on some hardware. 569 */ 570 if (dev->b_hw && stop) { 571 unsigned long delay = jiffies + OMAP_I2C_TIMEOUT; 572 u16 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); 573 while (con & OMAP_I2C_CON_STT) { 574 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); 575 576 /* Let the user know if i2c is in a bad state */ 577 if (time_after(jiffies, delay)) { 578 dev_err(dev->dev, "controller timed out " 579 "waiting for start condition to finish\n"); 580 return -ETIMEDOUT; 581 } 582 cpu_relax(); 583 } 584 585 w |= OMAP_I2C_CON_STP; 586 w &= ~OMAP_I2C_CON_STT; 587 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); 588 } 589 590 /* 591 * REVISIT: We should abort the transfer on signals, but the bus goes 592 * into arbitration and we're currently unable to recover from it. 593 */ 594 timeout = wait_for_completion_timeout(&dev->cmd_complete, 595 OMAP_I2C_TIMEOUT); 596 if (timeout == 0) { 597 dev_err(dev->dev, "controller timed out\n"); 598 omap_i2c_reset(dev); 599 __omap_i2c_init(dev); 600 return -ETIMEDOUT; 601 } 602 603 if (likely(!dev->cmd_err)) 604 return 0; 605 606 /* We have an error */ 607 if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR | 608 OMAP_I2C_STAT_XUDF)) { 609 omap_i2c_reset(dev); 610 __omap_i2c_init(dev); 611 return -EIO; 612 } 613 614 if (dev->cmd_err & OMAP_I2C_STAT_NACK) { 615 if (msg->flags & I2C_M_IGNORE_NAK) 616 return 0; 617 618 w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); 619 w |= OMAP_I2C_CON_STP; 620 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); 621 return -EREMOTEIO; 622 } 623 return -EIO; 624 } 625 626 627 /* 628 * Prepare controller for a transaction and call omap_i2c_xfer_msg 629 * to do the work during IRQ processing. 630 */ 631 static int 632 omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) 633 { 634 struct omap_i2c_dev *dev = i2c_get_adapdata(adap); 635 int i; 636 int r; 637 638 r = pm_runtime_get_sync(dev->dev); 639 if (IS_ERR_VALUE(r)) 640 goto out; 641 642 r = omap_i2c_wait_for_bb(dev); 643 if (r < 0) 644 goto out; 645 646 if (dev->set_mpu_wkup_lat != NULL) 647 dev->set_mpu_wkup_lat(dev->dev, dev->latency); 648 649 for (i = 0; i < num; i++) { 650 r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); 651 if (r != 0) 652 break; 653 } 654 655 if (r == 0) 656 r = num; 657 658 omap_i2c_wait_for_bb(dev); 659 660 if (dev->set_mpu_wkup_lat != NULL) 661 dev->set_mpu_wkup_lat(dev->dev, -1); 662 663 out: 664 pm_runtime_mark_last_busy(dev->dev); 665 pm_runtime_put_autosuspend(dev->dev); 666 return r; 667 } 668 669 static u32 670 omap_i2c_func(struct i2c_adapter *adap) 671 { 672 return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | 673 I2C_FUNC_PROTOCOL_MANGLING; 674 } 675 676 static inline void 677 omap_i2c_complete_cmd(struct omap_i2c_dev *dev, u16 err) 678 { 679 dev->cmd_err |= err; 680 complete(&dev->cmd_complete); 681 } 682 683 static inline void 684 omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat) 685 { 686 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat); 687 } 688 689 static inline void i2c_omap_errata_i207(struct omap_i2c_dev *dev, u16 stat) 690 { 691 /* 692 * I2C Errata(Errata Nos. OMAP2: 1.67, OMAP3: 1.8) 693 * Not applicable for OMAP4. 694 * Under certain rare conditions, RDR could be set again 695 * when the bus is busy, then ignore the interrupt and 696 * clear the interrupt. 697 */ 698 if (stat & OMAP_I2C_STAT_RDR) { 699 /* Step 1: If RDR is set, clear it */ 700 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR); 701 702 /* Step 2: */ 703 if (!(omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) 704 & OMAP_I2C_STAT_BB)) { 705 706 /* Step 3: */ 707 if (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) 708 & OMAP_I2C_STAT_RDR) { 709 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR); 710 dev_dbg(dev->dev, "RDR when bus is busy.\n"); 711 } 712 713 } 714 } 715 } 716 717 /* rev1 devices are apparently only on some 15xx */ 718 #ifdef CONFIG_ARCH_OMAP15XX 719 720 static irqreturn_t 721 omap_i2c_omap1_isr(int this_irq, void *dev_id) 722 { 723 struct omap_i2c_dev *dev = dev_id; 724 u16 iv, w; 725 726 if (pm_runtime_suspended(dev->dev)) 727 return IRQ_NONE; 728 729 iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); 730 switch (iv) { 731 case 0x00: /* None */ 732 break; 733 case 0x01: /* Arbitration lost */ 734 dev_err(dev->dev, "Arbitration lost\n"); 735 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL); 736 break; 737 case 0x02: /* No acknowledgement */ 738 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK); 739 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP); 740 break; 741 case 0x03: /* Register access ready */ 742 omap_i2c_complete_cmd(dev, 0); 743 break; 744 case 0x04: /* Receive data ready */ 745 if (dev->buf_len) { 746 w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); 747 *dev->buf++ = w; 748 dev->buf_len--; 749 if (dev->buf_len) { 750 *dev->buf++ = w >> 8; 751 dev->buf_len--; 752 } 753 } else 754 dev_err(dev->dev, "RRDY IRQ while no data requested\n"); 755 break; 756 case 0x05: /* Transmit data ready */ 757 if (dev->buf_len) { 758 w = *dev->buf++; 759 dev->buf_len--; 760 if (dev->buf_len) { 761 w |= *dev->buf++ << 8; 762 dev->buf_len--; 763 } 764 omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); 765 } else 766 dev_err(dev->dev, "XRDY IRQ while no data to send\n"); 767 break; 768 default: 769 return IRQ_NONE; 770 } 771 772 return IRQ_HANDLED; 773 } 774 #else 775 #define omap_i2c_omap1_isr NULL 776 #endif 777 778 /* 779 * OMAP3430 Errata i462: When an XRDY/XDR is hit, wait for XUDF before writing 780 * data to DATA_REG. Otherwise some data bytes can be lost while transferring 781 * them from the memory to the I2C interface. 782 */ 783 static int errata_omap3_i462(struct omap_i2c_dev *dev) 784 { 785 unsigned long timeout = 10000; 786 u16 stat; 787 788 do { 789 stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); 790 if (stat & OMAP_I2C_STAT_XUDF) 791 break; 792 793 if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { 794 omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_XRDY | 795 OMAP_I2C_STAT_XDR)); 796 if (stat & OMAP_I2C_STAT_NACK) { 797 dev->cmd_err |= OMAP_I2C_STAT_NACK; 798 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); 799 } 800 801 if (stat & OMAP_I2C_STAT_AL) { 802 dev_err(dev->dev, "Arbitration lost\n"); 803 dev->cmd_err |= OMAP_I2C_STAT_AL; 804 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL); 805 } 806 807 return -EIO; 808 } 809 810 cpu_relax(); 811 } while (--timeout); 812 813 if (!timeout) { 814 dev_err(dev->dev, "timeout waiting on XUDF bit\n"); 815 return 0; 816 } 817 818 return 0; 819 } 820 821 static void omap_i2c_receive_data(struct omap_i2c_dev *dev, u8 num_bytes, 822 bool is_rdr) 823 { 824 u16 w; 825 826 while (num_bytes--) { 827 w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); 828 *dev->buf++ = w; 829 dev->buf_len--; 830 831 /* 832 * Data reg in 2430, omap3 and 833 * omap4 is 8 bit wide 834 */ 835 if (dev->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) { 836 *dev->buf++ = w >> 8; 837 dev->buf_len--; 838 } 839 } 840 } 841 842 static int omap_i2c_transmit_data(struct omap_i2c_dev *dev, u8 num_bytes, 843 bool is_xdr) 844 { 845 u16 w; 846 847 while (num_bytes--) { 848 w = *dev->buf++; 849 dev->buf_len--; 850 851 /* 852 * Data reg in 2430, omap3 and 853 * omap4 is 8 bit wide 854 */ 855 if (dev->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) { 856 w |= *dev->buf++ << 8; 857 dev->buf_len--; 858 } 859 860 if (dev->errata & I2C_OMAP_ERRATA_I462) { 861 int ret; 862 863 ret = errata_omap3_i462(dev); 864 if (ret < 0) 865 return ret; 866 } 867 868 omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); 869 } 870 871 return 0; 872 } 873 874 static irqreturn_t 875 omap_i2c_isr(int irq, void *dev_id) 876 { 877 struct omap_i2c_dev *dev = dev_id; 878 irqreturn_t ret = IRQ_HANDLED; 879 u16 mask; 880 u16 stat; 881 882 spin_lock(&dev->lock); 883 mask = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); 884 stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); 885 886 if (stat & mask) 887 ret = IRQ_WAKE_THREAD; 888 889 spin_unlock(&dev->lock); 890 891 return ret; 892 } 893 894 static irqreturn_t 895 omap_i2c_isr_thread(int this_irq, void *dev_id) 896 { 897 struct omap_i2c_dev *dev = dev_id; 898 unsigned long flags; 899 u16 bits; 900 u16 stat; 901 int err = 0, count = 0; 902 903 spin_lock_irqsave(&dev->lock, flags); 904 do { 905 bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); 906 stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); 907 stat &= bits; 908 909 /* If we're in receiver mode, ignore XDR/XRDY */ 910 if (dev->receiver) 911 stat &= ~(OMAP_I2C_STAT_XDR | OMAP_I2C_STAT_XRDY); 912 else 913 stat &= ~(OMAP_I2C_STAT_RDR | OMAP_I2C_STAT_RRDY); 914 915 if (!stat) { 916 /* my work here is done */ 917 goto out; 918 } 919 920 dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat); 921 if (count++ == 100) { 922 dev_warn(dev->dev, "Too much work in one IRQ\n"); 923 break; 924 } 925 926 if (stat & OMAP_I2C_STAT_NACK) { 927 err |= OMAP_I2C_STAT_NACK; 928 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); 929 break; 930 } 931 932 if (stat & OMAP_I2C_STAT_AL) { 933 dev_err(dev->dev, "Arbitration lost\n"); 934 err |= OMAP_I2C_STAT_AL; 935 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL); 936 break; 937 } 938 939 /* 940 * ProDB0017052: Clear ARDY bit twice 941 */ 942 if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | 943 OMAP_I2C_STAT_AL)) { 944 omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_RRDY | 945 OMAP_I2C_STAT_RDR | 946 OMAP_I2C_STAT_XRDY | 947 OMAP_I2C_STAT_XDR | 948 OMAP_I2C_STAT_ARDY)); 949 break; 950 } 951 952 if (stat & OMAP_I2C_STAT_RDR) { 953 u8 num_bytes = 1; 954 955 if (dev->fifo_size) 956 num_bytes = dev->buf_len; 957 958 omap_i2c_receive_data(dev, num_bytes, true); 959 960 if (dev->errata & I2C_OMAP_ERRATA_I207) 961 i2c_omap_errata_i207(dev, stat); 962 963 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR); 964 continue; 965 } 966 967 if (stat & OMAP_I2C_STAT_RRDY) { 968 u8 num_bytes = 1; 969 970 if (dev->threshold) 971 num_bytes = dev->threshold; 972 973 omap_i2c_receive_data(dev, num_bytes, false); 974 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY); 975 continue; 976 } 977 978 if (stat & OMAP_I2C_STAT_XDR) { 979 u8 num_bytes = 1; 980 int ret; 981 982 if (dev->fifo_size) 983 num_bytes = dev->buf_len; 984 985 ret = omap_i2c_transmit_data(dev, num_bytes, true); 986 if (ret < 0) 987 break; 988 989 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XDR); 990 continue; 991 } 992 993 if (stat & OMAP_I2C_STAT_XRDY) { 994 u8 num_bytes = 1; 995 int ret; 996 997 if (dev->threshold) 998 num_bytes = dev->threshold; 999 1000 ret = omap_i2c_transmit_data(dev, num_bytes, false); 1001 if (ret < 0) 1002 break; 1003 1004 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY); 1005 continue; 1006 } 1007 1008 if (stat & OMAP_I2C_STAT_ROVR) { 1009 dev_err(dev->dev, "Receive overrun\n"); 1010 err |= OMAP_I2C_STAT_ROVR; 1011 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_ROVR); 1012 break; 1013 } 1014 1015 if (stat & OMAP_I2C_STAT_XUDF) { 1016 dev_err(dev->dev, "Transmit underflow\n"); 1017 err |= OMAP_I2C_STAT_XUDF; 1018 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XUDF); 1019 break; 1020 } 1021 } while (stat); 1022 1023 omap_i2c_complete_cmd(dev, err); 1024 1025 out: 1026 spin_unlock_irqrestore(&dev->lock, flags); 1027 1028 return IRQ_HANDLED; 1029 } 1030 1031 static const struct i2c_algorithm omap_i2c_algo = { 1032 .master_xfer = omap_i2c_xfer, 1033 .functionality = omap_i2c_func, 1034 }; 1035 1036 #ifdef CONFIG_OF 1037 static struct omap_i2c_bus_platform_data omap3_pdata = { 1038 .rev = OMAP_I2C_IP_VERSION_1, 1039 .flags = OMAP_I2C_FLAG_BUS_SHIFT_2, 1040 }; 1041 1042 static struct omap_i2c_bus_platform_data omap4_pdata = { 1043 .rev = OMAP_I2C_IP_VERSION_2, 1044 }; 1045 1046 static const struct of_device_id omap_i2c_of_match[] = { 1047 { 1048 .compatible = "ti,omap4-i2c", 1049 .data = &omap4_pdata, 1050 }, 1051 { 1052 .compatible = "ti,omap3-i2c", 1053 .data = &omap3_pdata, 1054 }, 1055 { }, 1056 }; 1057 MODULE_DEVICE_TABLE(of, omap_i2c_of_match); 1058 #endif 1059 1060 #define OMAP_I2C_SCHEME(rev) ((rev & 0xc000) >> 14) 1061 1062 #define OMAP_I2C_REV_SCHEME_0_MAJOR(rev) (rev >> 4) 1063 #define OMAP_I2C_REV_SCHEME_0_MINOR(rev) (rev & 0xf) 1064 1065 #define OMAP_I2C_REV_SCHEME_1_MAJOR(rev) ((rev & 0x0700) >> 7) 1066 #define OMAP_I2C_REV_SCHEME_1_MINOR(rev) (rev & 0x1f) 1067 #define OMAP_I2C_SCHEME_0 0 1068 #define OMAP_I2C_SCHEME_1 1 1069 1070 static int 1071 omap_i2c_probe(struct platform_device *pdev) 1072 { 1073 struct omap_i2c_dev *dev; 1074 struct i2c_adapter *adap; 1075 struct resource *mem; 1076 const struct omap_i2c_bus_platform_data *pdata = 1077 dev_get_platdata(&pdev->dev); 1078 struct device_node *node = pdev->dev.of_node; 1079 const struct of_device_id *match; 1080 int irq; 1081 int r; 1082 u32 rev; 1083 u16 minor, major; 1084 1085 irq = platform_get_irq(pdev, 0); 1086 if (irq < 0) { 1087 dev_err(&pdev->dev, "no irq resource?\n"); 1088 return irq; 1089 } 1090 1091 dev = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL); 1092 if (!dev) { 1093 dev_err(&pdev->dev, "Menory allocation failed\n"); 1094 return -ENOMEM; 1095 } 1096 1097 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1098 dev->base = devm_ioremap_resource(&pdev->dev, mem); 1099 if (IS_ERR(dev->base)) 1100 return PTR_ERR(dev->base); 1101 1102 match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev); 1103 if (match) { 1104 u32 freq = 100000; /* default to 100000 Hz */ 1105 1106 pdata = match->data; 1107 dev->flags = pdata->flags; 1108 1109 of_property_read_u32(node, "clock-frequency", &freq); 1110 /* convert DT freq value in Hz into kHz for speed */ 1111 dev->speed = freq / 1000; 1112 } else if (pdata != NULL) { 1113 dev->speed = pdata->clkrate; 1114 dev->flags = pdata->flags; 1115 dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; 1116 } 1117 1118 dev->dev = &pdev->dev; 1119 dev->irq = irq; 1120 1121 spin_lock_init(&dev->lock); 1122 1123 platform_set_drvdata(pdev, dev); 1124 init_completion(&dev->cmd_complete); 1125 1126 dev->reg_shift = (dev->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3; 1127 1128 pm_runtime_enable(dev->dev); 1129 pm_runtime_set_autosuspend_delay(dev->dev, OMAP_I2C_PM_TIMEOUT); 1130 pm_runtime_use_autosuspend(dev->dev); 1131 1132 r = pm_runtime_get_sync(dev->dev); 1133 if (IS_ERR_VALUE(r)) 1134 goto err_free_mem; 1135 1136 /* 1137 * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2. 1138 * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset. 1139 * Also since the omap_i2c_read_reg uses reg_map_ip_* a 1140 * raw_readw is done. 1141 */ 1142 rev = __raw_readw(dev->base + 0x04); 1143 1144 dev->scheme = OMAP_I2C_SCHEME(rev); 1145 switch (dev->scheme) { 1146 case OMAP_I2C_SCHEME_0: 1147 dev->regs = (u8 *)reg_map_ip_v1; 1148 dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG); 1149 minor = OMAP_I2C_REV_SCHEME_0_MAJOR(dev->rev); 1150 major = OMAP_I2C_REV_SCHEME_0_MAJOR(dev->rev); 1151 break; 1152 case OMAP_I2C_SCHEME_1: 1153 /* FALLTHROUGH */ 1154 default: 1155 dev->regs = (u8 *)reg_map_ip_v2; 1156 rev = (rev << 16) | 1157 omap_i2c_read_reg(dev, OMAP_I2C_IP_V2_REVNB_LO); 1158 minor = OMAP_I2C_REV_SCHEME_1_MINOR(rev); 1159 major = OMAP_I2C_REV_SCHEME_1_MAJOR(rev); 1160 dev->rev = rev; 1161 } 1162 1163 dev->errata = 0; 1164 1165 if (dev->rev >= OMAP_I2C_REV_ON_2430 && 1166 dev->rev < OMAP_I2C_REV_ON_4430_PLUS) 1167 dev->errata |= I2C_OMAP_ERRATA_I207; 1168 1169 if (dev->rev <= OMAP_I2C_REV_ON_3430_3530) 1170 dev->errata |= I2C_OMAP_ERRATA_I462; 1171 1172 if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) { 1173 u16 s; 1174 1175 /* Set up the fifo size - Get total size */ 1176 s = (omap_i2c_read_reg(dev, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3; 1177 dev->fifo_size = 0x8 << s; 1178 1179 /* 1180 * Set up notification threshold as half the total available 1181 * size. This is to ensure that we can handle the status on int 1182 * call back latencies. 1183 */ 1184 1185 dev->fifo_size = (dev->fifo_size / 2); 1186 1187 if (dev->rev < OMAP_I2C_REV_ON_3630) 1188 dev->b_hw = 1; /* Enable hardware fixes */ 1189 1190 /* calculate wakeup latency constraint for MPU */ 1191 if (dev->set_mpu_wkup_lat != NULL) 1192 dev->latency = (1000000 * dev->fifo_size) / 1193 (1000 * dev->speed / 8); 1194 } 1195 1196 /* reset ASAP, clearing any IRQs */ 1197 omap_i2c_init(dev); 1198 1199 if (dev->rev < OMAP_I2C_OMAP1_REV_2) 1200 r = devm_request_irq(&pdev->dev, dev->irq, omap_i2c_omap1_isr, 1201 IRQF_NO_SUSPEND, pdev->name, dev); 1202 else 1203 r = devm_request_threaded_irq(&pdev->dev, dev->irq, 1204 omap_i2c_isr, omap_i2c_isr_thread, 1205 IRQF_NO_SUSPEND | IRQF_ONESHOT, 1206 pdev->name, dev); 1207 1208 if (r) { 1209 dev_err(dev->dev, "failure requesting irq %i\n", dev->irq); 1210 goto err_unuse_clocks; 1211 } 1212 1213 adap = &dev->adapter; 1214 i2c_set_adapdata(adap, dev); 1215 adap->owner = THIS_MODULE; 1216 adap->class = I2C_CLASS_HWMON; 1217 strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name)); 1218 adap->algo = &omap_i2c_algo; 1219 adap->dev.parent = &pdev->dev; 1220 adap->dev.of_node = pdev->dev.of_node; 1221 1222 /* i2c device drivers may be active on return from add_adapter() */ 1223 adap->nr = pdev->id; 1224 r = i2c_add_numbered_adapter(adap); 1225 if (r) { 1226 dev_err(dev->dev, "failure adding adapter\n"); 1227 goto err_unuse_clocks; 1228 } 1229 1230 dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr, 1231 major, minor, dev->speed); 1232 1233 pm_runtime_mark_last_busy(dev->dev); 1234 pm_runtime_put_autosuspend(dev->dev); 1235 1236 return 0; 1237 1238 err_unuse_clocks: 1239 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); 1240 pm_runtime_put(dev->dev); 1241 pm_runtime_disable(&pdev->dev); 1242 err_free_mem: 1243 1244 return r; 1245 } 1246 1247 static int omap_i2c_remove(struct platform_device *pdev) 1248 { 1249 struct omap_i2c_dev *dev = platform_get_drvdata(pdev); 1250 int ret; 1251 1252 i2c_del_adapter(&dev->adapter); 1253 ret = pm_runtime_get_sync(&pdev->dev); 1254 if (IS_ERR_VALUE(ret)) 1255 return ret; 1256 1257 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); 1258 pm_runtime_put(&pdev->dev); 1259 pm_runtime_disable(&pdev->dev); 1260 return 0; 1261 } 1262 1263 #ifdef CONFIG_PM 1264 #ifdef CONFIG_PM_RUNTIME 1265 static int omap_i2c_runtime_suspend(struct device *dev) 1266 { 1267 struct platform_device *pdev = to_platform_device(dev); 1268 struct omap_i2c_dev *_dev = platform_get_drvdata(pdev); 1269 1270 _dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG); 1271 1272 if (_dev->scheme == OMAP_I2C_SCHEME_0) 1273 omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0); 1274 else 1275 omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1276 OMAP_I2C_IP_V2_INTERRUPTS_MASK); 1277 1278 if (_dev->rev < OMAP_I2C_OMAP1_REV_2) { 1279 omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */ 1280 } else { 1281 omap_i2c_write_reg(_dev, OMAP_I2C_STAT_REG, _dev->iestate); 1282 1283 /* Flush posted write */ 1284 omap_i2c_read_reg(_dev, OMAP_I2C_STAT_REG); 1285 } 1286 1287 return 0; 1288 } 1289 1290 static int omap_i2c_runtime_resume(struct device *dev) 1291 { 1292 struct platform_device *pdev = to_platform_device(dev); 1293 struct omap_i2c_dev *_dev = platform_get_drvdata(pdev); 1294 1295 if (!_dev->regs) 1296 return 0; 1297 1298 __omap_i2c_init(_dev); 1299 1300 return 0; 1301 } 1302 #endif /* CONFIG_PM_RUNTIME */ 1303 1304 static struct dev_pm_ops omap_i2c_pm_ops = { 1305 SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend, 1306 omap_i2c_runtime_resume, NULL) 1307 }; 1308 #define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops) 1309 #else 1310 #define OMAP_I2C_PM_OPS NULL 1311 #endif /* CONFIG_PM */ 1312 1313 static struct platform_driver omap_i2c_driver = { 1314 .probe = omap_i2c_probe, 1315 .remove = omap_i2c_remove, 1316 .driver = { 1317 .name = "omap_i2c", 1318 .owner = THIS_MODULE, 1319 .pm = OMAP_I2C_PM_OPS, 1320 .of_match_table = of_match_ptr(omap_i2c_of_match), 1321 }, 1322 }; 1323 1324 /* I2C may be needed to bring up other drivers */ 1325 static int __init 1326 omap_i2c_init_driver(void) 1327 { 1328 return platform_driver_register(&omap_i2c_driver); 1329 } 1330 subsys_initcall(omap_i2c_init_driver); 1331 1332 static void __exit omap_i2c_exit_driver(void) 1333 { 1334 platform_driver_unregister(&omap_i2c_driver); 1335 } 1336 module_exit(omap_i2c_exit_driver); 1337 1338 MODULE_AUTHOR("MontaVista Software, Inc. (and others)"); 1339 MODULE_DESCRIPTION("TI OMAP I2C bus adapter"); 1340 MODULE_LICENSE("GPL"); 1341 MODULE_ALIAS("platform:omap_i2c"); 1342