1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * This is a combined i2c adapter and algorithm driver for the 4 * MPC107/Tsi107 PowerPC northbridge and processors that include 5 * the same I2C unit (8240, 8245, 85xx). 6 * 7 * Copyright (C) 2003-2004 Humboldt Solutions Ltd, adrian@humboldt.co.uk 8 * Copyright (C) 2021 Allied Telesis Labs 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/module.h> 13 #include <linux/sched/signal.h> 14 #include <linux/of.h> 15 #include <linux/of_address.h> 16 #include <linux/of_irq.h> 17 #include <linux/platform_device.h> 18 #include <linux/property.h> 19 #include <linux/slab.h> 20 21 #include <linux/clk.h> 22 #include <linux/io.h> 23 #include <linux/iopoll.h> 24 #include <linux/fsl_devices.h> 25 #include <linux/i2c.h> 26 #include <linux/interrupt.h> 27 #include <linux/delay.h> 28 29 #include <asm/mpc52xx.h> 30 #include <asm/mpc85xx.h> 31 #include <sysdev/fsl_soc.h> 32 33 #define DRV_NAME "mpc-i2c" 34 35 #define MPC_I2C_CLOCK_LEGACY 0 36 #define MPC_I2C_CLOCK_PRESERVE (~0U) 37 38 #define MPC_I2C_FDR 0x04 39 #define MPC_I2C_CR 0x08 40 #define MPC_I2C_SR 0x0c 41 #define MPC_I2C_DR 0x10 42 #define MPC_I2C_DFSRR 0x14 43 44 #define CCR_MEN 0x80 45 #define CCR_MIEN 0x40 46 #define CCR_MSTA 0x20 47 #define CCR_MTX 0x10 48 #define CCR_TXAK 0x08 49 #define CCR_RSTA 0x04 50 #define CCR_RSVD 0x02 51 52 #define CSR_MCF 0x80 53 #define CSR_MAAS 0x40 54 #define CSR_MBB 0x20 55 #define CSR_MAL 0x10 56 #define CSR_SRW 0x04 57 #define CSR_MIF 0x02 58 #define CSR_RXAK 0x01 59 60 enum mpc_i2c_action { 61 MPC_I2C_ACTION_START = 1, 62 MPC_I2C_ACTION_RESTART, 63 MPC_I2C_ACTION_READ_BEGIN, 64 MPC_I2C_ACTION_READ_BYTE, 65 MPC_I2C_ACTION_WRITE, 66 MPC_I2C_ACTION_STOP, 67 68 __MPC_I2C_ACTION_CNT 69 }; 70 71 static const char * const action_str[] = { 72 "invalid", 73 "start", 74 "restart", 75 "read begin", 76 "read", 77 "write", 78 "stop", 79 }; 80 81 static_assert(ARRAY_SIZE(action_str) == __MPC_I2C_ACTION_CNT); 82 83 struct mpc_i2c { 84 struct device *dev; 85 void __iomem *base; 86 u32 interrupt; 87 wait_queue_head_t waitq; 88 spinlock_t lock; 89 struct i2c_adapter adap; 90 int irq; 91 u32 real_clk; 92 u8 fdr, dfsrr; 93 struct clk *clk_per; 94 u32 cntl_bits; 95 enum mpc_i2c_action action; 96 struct i2c_msg *msgs; 97 int num_msgs; 98 int curr_msg; 99 u32 byte_posn; 100 u32 block; 101 int rc; 102 int expect_rxack; 103 bool has_errata_A004447; 104 }; 105 106 struct mpc_i2c_divider { 107 u16 divider; 108 u16 fdr; /* including dfsrr */ 109 }; 110 111 struct mpc_i2c_data { 112 void (*setup)(struct device_node *node, struct mpc_i2c *i2c, u32 clock); 113 }; 114 115 static inline void writeccr(struct mpc_i2c *i2c, u32 x) 116 { 117 writeb(x, i2c->base + MPC_I2C_CR); 118 } 119 120 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release 121 * the bus, because it wants to send ACK. 122 * Following sequence of enabling/disabling and sending start/stop generates 123 * the 9 pulses, each with a START then ending with STOP, so it's all OK. 124 */ 125 static void mpc_i2c_fixup(struct mpc_i2c *i2c) 126 { 127 int k; 128 unsigned long flags; 129 130 for (k = 9; k; k--) { 131 writeccr(i2c, 0); 132 writeb(0, i2c->base + MPC_I2C_SR); /* clear any status bits */ 133 writeccr(i2c, CCR_MEN | CCR_MSTA); /* START */ 134 readb(i2c->base + MPC_I2C_DR); /* init xfer */ 135 udelay(15); /* let it hit the bus */ 136 local_irq_save(flags); /* should not be delayed further */ 137 writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSTA); /* delay SDA */ 138 readb(i2c->base + MPC_I2C_DR); 139 if (k != 1) 140 udelay(5); 141 local_irq_restore(flags); 142 } 143 writeccr(i2c, CCR_MEN); /* Initiate STOP */ 144 readb(i2c->base + MPC_I2C_DR); 145 udelay(15); /* Let STOP propagate */ 146 writeccr(i2c, 0); 147 } 148 149 static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask) 150 { 151 void __iomem *addr = i2c->base + MPC_I2C_SR; 152 u8 val; 153 154 return readb_poll_timeout(addr, val, val & mask, 0, 100); 155 } 156 157 /* 158 * Workaround for Erratum A004447. From the P2040CE Rev Q 159 * 160 * 1. Set up the frequency divider and sampling rate. 161 * 2. I2CCR - a0h 162 * 3. Poll for I2CSR[MBB] to get set. 163 * 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to 164 * step 5. If MAL is not set, then go to step 13. 165 * 5. I2CCR - 00h 166 * 6. I2CCR - 22h 167 * 7. I2CCR - a2h 168 * 8. Poll for I2CSR[MBB] to get set. 169 * 9. Issue read to I2CDR. 170 * 10. Poll for I2CSR[MIF] to be set. 171 * 11. I2CCR - 82h 172 * 12. Workaround complete. Skip the next steps. 173 * 13. Issue read to I2CDR. 174 * 14. Poll for I2CSR[MIF] to be set. 175 * 15. I2CCR - 80h 176 */ 177 static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c) 178 { 179 int ret; 180 u32 val; 181 182 writeccr(i2c, CCR_MEN | CCR_MSTA); 183 ret = i2c_mpc_wait_sr(i2c, CSR_MBB); 184 if (ret) { 185 dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); 186 return; 187 } 188 189 val = readb(i2c->base + MPC_I2C_SR); 190 191 if (val & CSR_MAL) { 192 writeccr(i2c, 0x00); 193 writeccr(i2c, CCR_MSTA | CCR_RSVD); 194 writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD); 195 ret = i2c_mpc_wait_sr(i2c, CSR_MBB); 196 if (ret) { 197 dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); 198 return; 199 } 200 val = readb(i2c->base + MPC_I2C_DR); 201 ret = i2c_mpc_wait_sr(i2c, CSR_MIF); 202 if (ret) { 203 dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); 204 return; 205 } 206 writeccr(i2c, CCR_MEN | CCR_RSVD); 207 } else { 208 val = readb(i2c->base + MPC_I2C_DR); 209 ret = i2c_mpc_wait_sr(i2c, CSR_MIF); 210 if (ret) { 211 dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); 212 return; 213 } 214 writeccr(i2c, CCR_MEN); 215 } 216 } 217 218 #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x) 219 static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { 220 {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, 221 {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02}, 222 {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28}, 223 {52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a}, 224 {68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09}, 225 {96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81}, 226 {128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30}, 227 {176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32}, 228 {240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10}, 229 {320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a}, 230 {448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14}, 231 {640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17}, 232 {1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d}, 233 {1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c}, 234 {2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f}, 235 {4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e}, 236 {7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c}, 237 {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f} 238 }; 239 240 static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, 241 u32 *real_clk) 242 { 243 struct fwnode_handle *fwnode = of_fwnode_handle(node); 244 const struct mpc_i2c_divider *div = NULL; 245 unsigned int pvr = mfspr(SPRN_PVR); 246 u32 divider; 247 int i; 248 249 if (clock == MPC_I2C_CLOCK_LEGACY) { 250 /* see below - default fdr = 0x3f -> div = 2048 */ 251 *real_clk = mpc5xxx_fwnode_get_bus_frequency(fwnode) / 2048; 252 return -EINVAL; 253 } 254 255 /* Determine divider value */ 256 divider = mpc5xxx_fwnode_get_bus_frequency(fwnode) / clock; 257 258 /* 259 * We want to choose an FDR/DFSR that generates an I2C bus speed that 260 * is equal to or lower than the requested speed. 261 */ 262 for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) { 263 div = &mpc_i2c_dividers_52xx[i]; 264 /* Old MPC5200 rev A CPUs do not support the high bits */ 265 if (div->fdr & 0xc0 && pvr == 0x80822011) 266 continue; 267 if (div->divider >= divider) 268 break; 269 } 270 271 *real_clk = mpc5xxx_fwnode_get_bus_frequency(fwnode) / div->divider; 272 return (int)div->fdr; 273 } 274 275 static void mpc_i2c_setup_52xx(struct device_node *node, 276 struct mpc_i2c *i2c, 277 u32 clock) 278 { 279 int ret, fdr; 280 281 if (clock == MPC_I2C_CLOCK_PRESERVE) { 282 dev_dbg(i2c->dev, "using fdr %d\n", 283 readb(i2c->base + MPC_I2C_FDR)); 284 return; 285 } 286 287 ret = mpc_i2c_get_fdr_52xx(node, clock, &i2c->real_clk); 288 fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ 289 290 writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); 291 292 if (ret >= 0) 293 dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk, 294 fdr); 295 } 296 #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */ 297 static void mpc_i2c_setup_52xx(struct device_node *node, 298 struct mpc_i2c *i2c, 299 u32 clock) 300 { 301 } 302 #endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */ 303 304 #ifdef CONFIG_PPC_MPC512x 305 static void mpc_i2c_setup_512x(struct device_node *node, 306 struct mpc_i2c *i2c, 307 u32 clock) 308 { 309 struct device_node *node_ctrl; 310 void __iomem *ctrl; 311 u32 idx; 312 313 /* Enable I2C interrupts for mpc5121 */ 314 node_ctrl = of_find_compatible_node(NULL, NULL, 315 "fsl,mpc5121-i2c-ctrl"); 316 if (node_ctrl) { 317 ctrl = of_iomap(node_ctrl, 0); 318 if (ctrl) { 319 u64 addr; 320 /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */ 321 of_property_read_reg(node, 0, &addr, NULL); 322 idx = (addr & 0xff) / 0x20; 323 setbits32(ctrl, 1 << (24 + idx * 2)); 324 iounmap(ctrl); 325 } 326 of_node_put(node_ctrl); 327 } 328 329 /* The clock setup for the 52xx works also fine for the 512x */ 330 mpc_i2c_setup_52xx(node, i2c, clock); 331 } 332 #else /* CONFIG_PPC_MPC512x */ 333 static void mpc_i2c_setup_512x(struct device_node *node, 334 struct mpc_i2c *i2c, 335 u32 clock) 336 { 337 } 338 #endif /* CONFIG_PPC_MPC512x */ 339 340 #ifdef CONFIG_FSL_SOC 341 static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { 342 {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123}, 343 {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102}, 344 {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127}, 345 {544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105}, 346 {672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106}, 347 {800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107}, 348 {1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07}, 349 {1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a}, 350 {1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b}, 351 {2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e}, 352 {3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133}, 353 {4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136}, 354 {7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115}, 355 {12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b}, 356 {18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e}, 357 {30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d}, 358 {49152, 0x011e}, {61440, 0x011f} 359 }; 360 361 static u32 mpc_i2c_get_sec_cfg_8xxx(void) 362 { 363 struct device_node *node; 364 u32 __iomem *reg; 365 u32 val = 0; 366 367 node = of_find_node_by_name(NULL, "global-utilities"); 368 if (node) { 369 const u32 *prop = of_get_property(node, "reg", NULL); 370 if (prop) { 371 /* 372 * Map and check POR Device Status Register 2 373 * (PORDEVSR2) at 0xE0014. Note than while MPC8533 374 * and MPC8544 indicate SEC frequency ratio 375 * configuration as bit 26 in PORDEVSR2, other MPC8xxx 376 * parts may store it differently or may not have it 377 * at all. 378 */ 379 reg = ioremap(get_immrbase() + *prop + 0x14, 0x4); 380 if (!reg) 381 printk(KERN_ERR 382 "Error: couldn't map PORDEVSR2\n"); 383 else 384 val = in_be32(reg) & 0x00000020; /* sec-cfg */ 385 iounmap(reg); 386 } 387 } 388 of_node_put(node); 389 390 return val; 391 } 392 393 static u32 mpc_i2c_get_prescaler_8xxx(void) 394 { 395 /* 396 * According to the AN2919 all MPC824x have prescaler 1, while MPC83xx 397 * may have prescaler 1, 2, or 3, depending on the power-on 398 * configuration. 399 */ 400 u32 prescaler = 1; 401 402 /* mpc85xx */ 403 if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2) 404 || pvr_version_is(PVR_VER_E500MC) 405 || pvr_version_is(PVR_VER_E5500) 406 || pvr_version_is(PVR_VER_E6500)) { 407 unsigned int svr = mfspr(SPRN_SVR); 408 409 if ((SVR_SOC_VER(svr) == SVR_8540) 410 || (SVR_SOC_VER(svr) == SVR_8541) 411 || (SVR_SOC_VER(svr) == SVR_8560) 412 || (SVR_SOC_VER(svr) == SVR_8555) 413 || (SVR_SOC_VER(svr) == SVR_8610)) 414 /* the above 85xx SoCs have prescaler 1 */ 415 prescaler = 1; 416 else if ((SVR_SOC_VER(svr) == SVR_8533) 417 || (SVR_SOC_VER(svr) == SVR_8544)) 418 /* the above 85xx SoCs have prescaler 3 or 2 */ 419 prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2; 420 else 421 /* all the other 85xx have prescaler 2 */ 422 prescaler = 2; 423 } 424 425 return prescaler; 426 } 427 428 static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, 429 u32 *real_clk) 430 { 431 const struct mpc_i2c_divider *div = NULL; 432 u32 prescaler = mpc_i2c_get_prescaler_8xxx(); 433 u32 divider; 434 int i; 435 436 if (clock == MPC_I2C_CLOCK_LEGACY) { 437 /* see below - default fdr = 0x1031 -> div = 16 * 3072 */ 438 *real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072); 439 return -EINVAL; 440 } 441 442 divider = fsl_get_sys_freq() / clock / prescaler; 443 444 pr_debug("I2C: src_clock=%d clock=%d divider=%d\n", 445 fsl_get_sys_freq(), clock, divider); 446 447 /* 448 * We want to choose an FDR/DFSR that generates an I2C bus speed that 449 * is equal to or lower than the requested speed. 450 */ 451 for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) { 452 div = &mpc_i2c_dividers_8xxx[i]; 453 if (div->divider >= divider) 454 break; 455 } 456 457 *real_clk = fsl_get_sys_freq() / prescaler / div->divider; 458 return (int)div->fdr; 459 } 460 461 static void mpc_i2c_setup_8xxx(struct device_node *node, 462 struct mpc_i2c *i2c, 463 u32 clock) 464 { 465 int ret, fdr; 466 467 if (clock == MPC_I2C_CLOCK_PRESERVE) { 468 dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n", 469 readb(i2c->base + MPC_I2C_DFSRR), 470 readb(i2c->base + MPC_I2C_FDR)); 471 return; 472 } 473 474 ret = mpc_i2c_get_fdr_8xxx(node, clock, &i2c->real_clk); 475 fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ 476 477 writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); 478 writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR); 479 480 if (ret >= 0) 481 dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", 482 i2c->real_clk, fdr >> 8, fdr & 0xff); 483 } 484 485 #else /* !CONFIG_FSL_SOC */ 486 static void mpc_i2c_setup_8xxx(struct device_node *node, 487 struct mpc_i2c *i2c, 488 u32 clock) 489 { 490 } 491 #endif /* CONFIG_FSL_SOC */ 492 493 static void mpc_i2c_finish(struct mpc_i2c *i2c, int rc) 494 { 495 i2c->rc = rc; 496 i2c->block = 0; 497 i2c->cntl_bits = CCR_MEN; 498 writeccr(i2c, i2c->cntl_bits); 499 wake_up(&i2c->waitq); 500 } 501 502 static void mpc_i2c_do_action(struct mpc_i2c *i2c) 503 { 504 struct i2c_msg *msg = NULL; 505 int dir = 0; 506 int recv_len = 0; 507 u8 byte; 508 509 dev_dbg(i2c->dev, "action = %s\n", action_str[i2c->action]); 510 511 i2c->cntl_bits &= ~(CCR_RSTA | CCR_MTX | CCR_TXAK); 512 513 if (i2c->action != MPC_I2C_ACTION_STOP) { 514 msg = &i2c->msgs[i2c->curr_msg]; 515 if (msg->flags & I2C_M_RD) 516 dir = 1; 517 if (msg->flags & I2C_M_RECV_LEN) 518 recv_len = 1; 519 } 520 521 switch (i2c->action) { 522 case MPC_I2C_ACTION_RESTART: 523 i2c->cntl_bits |= CCR_RSTA; 524 fallthrough; 525 526 case MPC_I2C_ACTION_START: 527 i2c->cntl_bits |= CCR_MSTA | CCR_MTX; 528 writeccr(i2c, i2c->cntl_bits); 529 writeb((msg->addr << 1) | dir, i2c->base + MPC_I2C_DR); 530 i2c->expect_rxack = 1; 531 i2c->action = dir ? MPC_I2C_ACTION_READ_BEGIN : MPC_I2C_ACTION_WRITE; 532 break; 533 534 case MPC_I2C_ACTION_READ_BEGIN: 535 if (msg->len) { 536 if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN)) 537 i2c->cntl_bits |= CCR_TXAK; 538 539 writeccr(i2c, i2c->cntl_bits); 540 /* Dummy read */ 541 readb(i2c->base + MPC_I2C_DR); 542 } 543 i2c->action = MPC_I2C_ACTION_READ_BYTE; 544 break; 545 546 case MPC_I2C_ACTION_READ_BYTE: 547 if (i2c->byte_posn || !recv_len) { 548 /* Generate Tx ACK on next to last byte */ 549 if (i2c->byte_posn == msg->len - 2) 550 i2c->cntl_bits |= CCR_TXAK; 551 /* Do not generate stop on last byte */ 552 if (i2c->byte_posn == msg->len - 1) 553 i2c->cntl_bits |= CCR_MTX; 554 555 writeccr(i2c, i2c->cntl_bits); 556 } 557 558 byte = readb(i2c->base + MPC_I2C_DR); 559 560 if (i2c->byte_posn == 0 && recv_len) { 561 if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX) { 562 mpc_i2c_finish(i2c, -EPROTO); 563 return; 564 } 565 msg->len += byte; 566 /* 567 * For block reads, generate Tx ACK here if data length 568 * is 1 byte (total length is 2 bytes). 569 */ 570 if (msg->len == 2) { 571 i2c->cntl_bits |= CCR_TXAK; 572 writeccr(i2c, i2c->cntl_bits); 573 } 574 } 575 576 dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action], byte); 577 msg->buf[i2c->byte_posn++] = byte; 578 break; 579 580 case MPC_I2C_ACTION_WRITE: 581 dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action], 582 msg->buf[i2c->byte_posn]); 583 writeb(msg->buf[i2c->byte_posn++], i2c->base + MPC_I2C_DR); 584 i2c->expect_rxack = 1; 585 break; 586 587 case MPC_I2C_ACTION_STOP: 588 mpc_i2c_finish(i2c, 0); 589 break; 590 591 default: 592 WARN(1, "Unexpected action %d\n", i2c->action); 593 break; 594 } 595 596 if (msg && msg->len == i2c->byte_posn) { 597 i2c->curr_msg++; 598 i2c->byte_posn = 0; 599 600 if (i2c->curr_msg == i2c->num_msgs) { 601 i2c->action = MPC_I2C_ACTION_STOP; 602 /* 603 * We don't get another interrupt on read so 604 * finish the transfer now 605 */ 606 if (dir) 607 mpc_i2c_finish(i2c, 0); 608 } else { 609 i2c->action = MPC_I2C_ACTION_RESTART; 610 } 611 } 612 } 613 614 static void mpc_i2c_do_intr(struct mpc_i2c *i2c, u8 status) 615 { 616 spin_lock(&i2c->lock); 617 618 if (!(status & CSR_MCF)) { 619 dev_dbg(i2c->dev, "unfinished\n"); 620 mpc_i2c_finish(i2c, -EIO); 621 goto out; 622 } 623 624 if (status & CSR_MAL) { 625 dev_dbg(i2c->dev, "arbitration lost\n"); 626 mpc_i2c_finish(i2c, -EAGAIN); 627 goto out; 628 } 629 630 if (i2c->expect_rxack && (status & CSR_RXAK)) { 631 dev_dbg(i2c->dev, "no Rx ACK\n"); 632 mpc_i2c_finish(i2c, -ENXIO); 633 goto out; 634 } 635 i2c->expect_rxack = 0; 636 637 mpc_i2c_do_action(i2c); 638 639 out: 640 spin_unlock(&i2c->lock); 641 } 642 643 static irqreturn_t mpc_i2c_isr(int irq, void *dev_id) 644 { 645 struct mpc_i2c *i2c = dev_id; 646 u8 status; 647 648 status = readb(i2c->base + MPC_I2C_SR); 649 if (status & CSR_MIF) { 650 /* Wait up to 100us for transfer to properly complete */ 651 readb_poll_timeout_atomic(i2c->base + MPC_I2C_SR, status, status & CSR_MCF, 0, 100); 652 writeb(0, i2c->base + MPC_I2C_SR); 653 mpc_i2c_do_intr(i2c, status); 654 return IRQ_HANDLED; 655 } 656 return IRQ_NONE; 657 } 658 659 static int mpc_i2c_wait_for_completion(struct mpc_i2c *i2c) 660 { 661 long time_left; 662 663 time_left = wait_event_timeout(i2c->waitq, !i2c->block, i2c->adap.timeout); 664 if (!time_left) 665 return -ETIMEDOUT; 666 if (time_left < 0) 667 return time_left; 668 669 return 0; 670 } 671 672 static int mpc_i2c_execute_msg(struct mpc_i2c *i2c) 673 { 674 unsigned long orig_jiffies; 675 unsigned long flags; 676 int ret; 677 678 spin_lock_irqsave(&i2c->lock, flags); 679 680 i2c->curr_msg = 0; 681 i2c->rc = 0; 682 i2c->byte_posn = 0; 683 i2c->block = 1; 684 i2c->action = MPC_I2C_ACTION_START; 685 686 i2c->cntl_bits = CCR_MEN | CCR_MIEN; 687 writeb(0, i2c->base + MPC_I2C_SR); 688 writeccr(i2c, i2c->cntl_bits); 689 690 mpc_i2c_do_action(i2c); 691 692 spin_unlock_irqrestore(&i2c->lock, flags); 693 694 ret = mpc_i2c_wait_for_completion(i2c); 695 if (ret) 696 i2c->rc = ret; 697 698 if (i2c->rc == -EIO || i2c->rc == -EAGAIN || i2c->rc == -ETIMEDOUT) 699 i2c_recover_bus(&i2c->adap); 700 701 orig_jiffies = jiffies; 702 /* Wait until STOP is seen, allow up to 1 s */ 703 while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { 704 if (time_after(jiffies, orig_jiffies + HZ)) { 705 u8 status = readb(i2c->base + MPC_I2C_SR); 706 707 dev_dbg(i2c->dev, "timeout\n"); 708 if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { 709 writeb(status & ~CSR_MAL, 710 i2c->base + MPC_I2C_SR); 711 i2c_recover_bus(&i2c->adap); 712 } 713 return -EIO; 714 } 715 cond_resched(); 716 } 717 718 return i2c->rc; 719 } 720 721 static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) 722 { 723 int rc, ret = num; 724 struct mpc_i2c *i2c = i2c_get_adapdata(adap); 725 int i; 726 727 dev_dbg(i2c->dev, "num = %d\n", num); 728 for (i = 0; i < num; i++) 729 dev_dbg(i2c->dev, " addr = %02x, flags = %02x, len = %d, %*ph\n", 730 msgs[i].addr, msgs[i].flags, msgs[i].len, 731 msgs[i].flags & I2C_M_RD ? 0 : msgs[i].len, 732 msgs[i].buf); 733 734 WARN_ON(i2c->msgs != NULL); 735 i2c->msgs = msgs; 736 i2c->num_msgs = num; 737 738 rc = mpc_i2c_execute_msg(i2c); 739 if (rc < 0) 740 ret = rc; 741 742 i2c->num_msgs = 0; 743 i2c->msgs = NULL; 744 745 return ret; 746 } 747 748 static u32 mpc_functionality(struct i2c_adapter *adap) 749 { 750 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL 751 | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL; 752 } 753 754 static int fsl_i2c_bus_recovery(struct i2c_adapter *adap) 755 { 756 struct mpc_i2c *i2c = i2c_get_adapdata(adap); 757 758 if (i2c->has_errata_A004447) 759 mpc_i2c_fixup_A004447(i2c); 760 else 761 mpc_i2c_fixup(i2c); 762 763 return 0; 764 } 765 766 static const struct i2c_algorithm mpc_algo = { 767 .master_xfer = mpc_xfer, 768 .functionality = mpc_functionality, 769 }; 770 771 static struct i2c_adapter mpc_ops = { 772 .owner = THIS_MODULE, 773 .algo = &mpc_algo, 774 }; 775 776 static struct i2c_bus_recovery_info fsl_i2c_recovery_info = { 777 .recover_bus = fsl_i2c_bus_recovery, 778 }; 779 780 static int fsl_i2c_probe(struct platform_device *op) 781 { 782 const struct mpc_i2c_data *data; 783 struct mpc_i2c *i2c; 784 struct clk *clk; 785 int result; 786 u32 clock; 787 int err; 788 789 i2c = devm_kzalloc(&op->dev, sizeof(*i2c), GFP_KERNEL); 790 if (!i2c) 791 return -ENOMEM; 792 793 i2c->dev = &op->dev; /* for debug and error output */ 794 795 init_waitqueue_head(&i2c->waitq); 796 spin_lock_init(&i2c->lock); 797 798 i2c->base = devm_platform_ioremap_resource(op, 0); 799 if (IS_ERR(i2c->base)) 800 return PTR_ERR(i2c->base); 801 802 i2c->irq = platform_get_irq(op, 0); 803 if (i2c->irq < 0) 804 return i2c->irq; 805 806 result = devm_request_irq(&op->dev, i2c->irq, mpc_i2c_isr, 807 IRQF_SHARED, "i2c-mpc", i2c); 808 if (result < 0) { 809 dev_err(i2c->dev, "failed to attach interrupt\n"); 810 return result; 811 } 812 813 /* 814 * enable clock for the I2C peripheral (non fatal), 815 * keep a reference upon successful allocation 816 */ 817 clk = devm_clk_get_optional(&op->dev, NULL); 818 if (IS_ERR(clk)) 819 return PTR_ERR(clk); 820 821 err = clk_prepare_enable(clk); 822 if (err) { 823 dev_err(&op->dev, "failed to enable clock\n"); 824 return err; 825 } 826 827 i2c->clk_per = clk; 828 829 if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) { 830 clock = MPC_I2C_CLOCK_PRESERVE; 831 } else { 832 result = of_property_read_u32(op->dev.of_node, 833 "clock-frequency", &clock); 834 if (result) 835 clock = MPC_I2C_CLOCK_LEGACY; 836 } 837 838 data = device_get_match_data(&op->dev); 839 if (data) { 840 data->setup(op->dev.of_node, i2c, clock); 841 } else { 842 /* Backwards compatibility */ 843 if (of_property_read_bool(op->dev.of_node, "dfsrr")) 844 mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock); 845 } 846 847 /* 848 * "fsl,timeout" has been marked as deprecated and, to maintain 849 * backward compatibility, we will only look for it if 850 * "i2c-scl-clk-low-timeout-us" is not present. 851 */ 852 result = of_property_read_u32(op->dev.of_node, 853 "i2c-scl-clk-low-timeout-us", 854 &mpc_ops.timeout); 855 if (result == -EINVAL) 856 result = of_property_read_u32(op->dev.of_node, 857 "fsl,timeout", &mpc_ops.timeout); 858 859 if (!result) { 860 mpc_ops.timeout *= HZ / 1000000; 861 if (mpc_ops.timeout < 5) 862 mpc_ops.timeout = 5; 863 } else { 864 mpc_ops.timeout = HZ; 865 } 866 867 dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ); 868 869 if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447")) 870 i2c->has_errata_A004447 = true; 871 872 i2c->adap = mpc_ops; 873 scnprintf(i2c->adap.name, sizeof(i2c->adap.name), 874 "MPC adapter (%s)", of_node_full_name(op->dev.of_node)); 875 i2c->adap.dev.parent = &op->dev; 876 i2c->adap.nr = op->id; 877 i2c->adap.dev.of_node = of_node_get(op->dev.of_node); 878 i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info; 879 platform_set_drvdata(op, i2c); 880 i2c_set_adapdata(&i2c->adap, i2c); 881 882 result = i2c_add_numbered_adapter(&i2c->adap); 883 if (result) 884 goto fail_add; 885 886 return 0; 887 888 fail_add: 889 clk_disable_unprepare(i2c->clk_per); 890 891 return result; 892 }; 893 894 static void fsl_i2c_remove(struct platform_device *op) 895 { 896 struct mpc_i2c *i2c = platform_get_drvdata(op); 897 898 i2c_del_adapter(&i2c->adap); 899 900 clk_disable_unprepare(i2c->clk_per); 901 }; 902 903 static int __maybe_unused mpc_i2c_suspend(struct device *dev) 904 { 905 struct mpc_i2c *i2c = dev_get_drvdata(dev); 906 907 i2c->fdr = readb(i2c->base + MPC_I2C_FDR); 908 i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR); 909 910 return 0; 911 } 912 913 static int __maybe_unused mpc_i2c_resume(struct device *dev) 914 { 915 struct mpc_i2c *i2c = dev_get_drvdata(dev); 916 917 writeb(i2c->fdr, i2c->base + MPC_I2C_FDR); 918 writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR); 919 920 return 0; 921 } 922 static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume); 923 924 static const struct mpc_i2c_data mpc_i2c_data_512x = { 925 .setup = mpc_i2c_setup_512x, 926 }; 927 928 static const struct mpc_i2c_data mpc_i2c_data_52xx = { 929 .setup = mpc_i2c_setup_52xx, 930 }; 931 932 static const struct mpc_i2c_data mpc_i2c_data_8313 = { 933 .setup = mpc_i2c_setup_8xxx, 934 }; 935 936 static const struct mpc_i2c_data mpc_i2c_data_8543 = { 937 .setup = mpc_i2c_setup_8xxx, 938 }; 939 940 static const struct mpc_i2c_data mpc_i2c_data_8544 = { 941 .setup = mpc_i2c_setup_8xxx, 942 }; 943 944 static const struct of_device_id mpc_i2c_of_match[] = { 945 {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, 946 {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, }, 947 {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, 948 {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, }, 949 {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, }, 950 {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, }, 951 {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, }, 952 /* Backward compatibility */ 953 {.compatible = "fsl-i2c", }, 954 {}, 955 }; 956 MODULE_DEVICE_TABLE(of, mpc_i2c_of_match); 957 958 /* Structure for a device driver */ 959 static struct platform_driver mpc_i2c_driver = { 960 .probe = fsl_i2c_probe, 961 .remove_new = fsl_i2c_remove, 962 .driver = { 963 .name = DRV_NAME, 964 .of_match_table = mpc_i2c_of_match, 965 .pm = &mpc_i2c_pm_ops, 966 }, 967 }; 968 969 module_platform_driver(mpc_i2c_driver); 970 971 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); 972 MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and " 973 "MPC824x/83xx/85xx/86xx/512x/52xx processors"); 974 MODULE_LICENSE("GPL"); 975