1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * This is a combined i2c adapter and algorithm driver for the 4 * MPC107/Tsi107 PowerPC northbridge and processors that include 5 * the same I2C unit (8240, 8245, 85xx). 6 * 7 * Copyright (C) 2003-2004 Humboldt Solutions Ltd, adrian@humboldt.co.uk 8 * Copyright (C) 2021 Allied Telesis Labs 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/module.h> 13 #include <linux/sched/signal.h> 14 #include <linux/of_address.h> 15 #include <linux/of_irq.h> 16 #include <linux/of_platform.h> 17 #include <linux/property.h> 18 #include <linux/slab.h> 19 20 #include <linux/clk.h> 21 #include <linux/io.h> 22 #include <linux/iopoll.h> 23 #include <linux/fsl_devices.h> 24 #include <linux/i2c.h> 25 #include <linux/interrupt.h> 26 #include <linux/delay.h> 27 28 #include <asm/mpc52xx.h> 29 #include <asm/mpc85xx.h> 30 #include <sysdev/fsl_soc.h> 31 32 #define DRV_NAME "mpc-i2c" 33 34 #define MPC_I2C_CLOCK_LEGACY 0 35 #define MPC_I2C_CLOCK_PRESERVE (~0U) 36 37 #define MPC_I2C_FDR 0x04 38 #define MPC_I2C_CR 0x08 39 #define MPC_I2C_SR 0x0c 40 #define MPC_I2C_DR 0x10 41 #define MPC_I2C_DFSRR 0x14 42 43 #define CCR_MEN 0x80 44 #define CCR_MIEN 0x40 45 #define CCR_MSTA 0x20 46 #define CCR_MTX 0x10 47 #define CCR_TXAK 0x08 48 #define CCR_RSTA 0x04 49 #define CCR_RSVD 0x02 50 51 #define CSR_MCF 0x80 52 #define CSR_MAAS 0x40 53 #define CSR_MBB 0x20 54 #define CSR_MAL 0x10 55 #define CSR_SRW 0x04 56 #define CSR_MIF 0x02 57 #define CSR_RXAK 0x01 58 59 enum mpc_i2c_action { 60 MPC_I2C_ACTION_START = 1, 61 MPC_I2C_ACTION_RESTART, 62 MPC_I2C_ACTION_READ_BEGIN, 63 MPC_I2C_ACTION_READ_BYTE, 64 MPC_I2C_ACTION_WRITE, 65 MPC_I2C_ACTION_STOP, 66 67 __MPC_I2C_ACTION_CNT 68 }; 69 70 static const char * const action_str[] = { 71 "invalid", 72 "start", 73 "restart", 74 "read begin", 75 "read", 76 "write", 77 "stop", 78 }; 79 80 static_assert(ARRAY_SIZE(action_str) == __MPC_I2C_ACTION_CNT); 81 82 struct mpc_i2c { 83 struct device *dev; 84 void __iomem *base; 85 u32 interrupt; 86 wait_queue_head_t waitq; 87 spinlock_t lock; 88 struct i2c_adapter adap; 89 int irq; 90 u32 real_clk; 91 u8 fdr, dfsrr; 92 struct clk *clk_per; 93 u32 cntl_bits; 94 enum mpc_i2c_action action; 95 struct i2c_msg *msgs; 96 int num_msgs; 97 int curr_msg; 98 u32 byte_posn; 99 u32 block; 100 int rc; 101 int expect_rxack; 102 bool has_errata_A004447; 103 }; 104 105 struct mpc_i2c_divider { 106 u16 divider; 107 u16 fdr; /* including dfsrr */ 108 }; 109 110 struct mpc_i2c_data { 111 void (*setup)(struct device_node *node, struct mpc_i2c *i2c, u32 clock); 112 }; 113 114 static inline void writeccr(struct mpc_i2c *i2c, u32 x) 115 { 116 writeb(x, i2c->base + MPC_I2C_CR); 117 } 118 119 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release 120 * the bus, because it wants to send ACK. 121 * Following sequence of enabling/disabling and sending start/stop generates 122 * the 9 pulses, so it's all OK. 123 */ 124 static void mpc_i2c_fixup(struct mpc_i2c *i2c) 125 { 126 int k; 127 u32 delay_val = 1000000 / i2c->real_clk + 1; 128 129 if (delay_val < 2) 130 delay_val = 2; 131 132 for (k = 9; k; k--) { 133 writeccr(i2c, 0); 134 writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN); 135 readb(i2c->base + MPC_I2C_DR); 136 writeccr(i2c, CCR_MEN); 137 udelay(delay_val << 1); 138 } 139 } 140 141 static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask) 142 { 143 void __iomem *addr = i2c->base + MPC_I2C_SR; 144 u8 val; 145 146 return readb_poll_timeout(addr, val, val & mask, 0, 100); 147 } 148 149 /* 150 * Workaround for Erratum A004447. From the P2040CE Rev Q 151 * 152 * 1. Set up the frequency divider and sampling rate. 153 * 2. I2CCR - a0h 154 * 3. Poll for I2CSR[MBB] to get set. 155 * 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to 156 * step 5. If MAL is not set, then go to step 13. 157 * 5. I2CCR - 00h 158 * 6. I2CCR - 22h 159 * 7. I2CCR - a2h 160 * 8. Poll for I2CSR[MBB] to get set. 161 * 9. Issue read to I2CDR. 162 * 10. Poll for I2CSR[MIF] to be set. 163 * 11. I2CCR - 82h 164 * 12. Workaround complete. Skip the next steps. 165 * 13. Issue read to I2CDR. 166 * 14. Poll for I2CSR[MIF] to be set. 167 * 15. I2CCR - 80h 168 */ 169 static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c) 170 { 171 int ret; 172 u32 val; 173 174 writeccr(i2c, CCR_MEN | CCR_MSTA); 175 ret = i2c_mpc_wait_sr(i2c, CSR_MBB); 176 if (ret) { 177 dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); 178 return; 179 } 180 181 val = readb(i2c->base + MPC_I2C_SR); 182 183 if (val & CSR_MAL) { 184 writeccr(i2c, 0x00); 185 writeccr(i2c, CCR_MSTA | CCR_RSVD); 186 writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD); 187 ret = i2c_mpc_wait_sr(i2c, CSR_MBB); 188 if (ret) { 189 dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); 190 return; 191 } 192 val = readb(i2c->base + MPC_I2C_DR); 193 ret = i2c_mpc_wait_sr(i2c, CSR_MIF); 194 if (ret) { 195 dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); 196 return; 197 } 198 writeccr(i2c, CCR_MEN | CCR_RSVD); 199 } else { 200 val = readb(i2c->base + MPC_I2C_DR); 201 ret = i2c_mpc_wait_sr(i2c, CSR_MIF); 202 if (ret) { 203 dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); 204 return; 205 } 206 writeccr(i2c, CCR_MEN); 207 } 208 } 209 210 #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x) 211 static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { 212 {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, 213 {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02}, 214 {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28}, 215 {52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a}, 216 {68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09}, 217 {96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81}, 218 {128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30}, 219 {176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32}, 220 {240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10}, 221 {320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a}, 222 {448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14}, 223 {640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17}, 224 {1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d}, 225 {1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c}, 226 {2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f}, 227 {4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e}, 228 {7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c}, 229 {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f} 230 }; 231 232 static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, 233 u32 *real_clk) 234 { 235 const struct mpc_i2c_divider *div = NULL; 236 unsigned int pvr = mfspr(SPRN_PVR); 237 u32 divider; 238 int i; 239 240 if (clock == MPC_I2C_CLOCK_LEGACY) { 241 /* see below - default fdr = 0x3f -> div = 2048 */ 242 *real_clk = mpc5xxx_get_bus_frequency(node) / 2048; 243 return -EINVAL; 244 } 245 246 /* Determine divider value */ 247 divider = mpc5xxx_get_bus_frequency(node) / clock; 248 249 /* 250 * We want to choose an FDR/DFSR that generates an I2C bus speed that 251 * is equal to or lower than the requested speed. 252 */ 253 for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) { 254 div = &mpc_i2c_dividers_52xx[i]; 255 /* Old MPC5200 rev A CPUs do not support the high bits */ 256 if (div->fdr & 0xc0 && pvr == 0x80822011) 257 continue; 258 if (div->divider >= divider) 259 break; 260 } 261 262 *real_clk = mpc5xxx_get_bus_frequency(node) / div->divider; 263 return (int)div->fdr; 264 } 265 266 static void mpc_i2c_setup_52xx(struct device_node *node, 267 struct mpc_i2c *i2c, 268 u32 clock) 269 { 270 int ret, fdr; 271 272 if (clock == MPC_I2C_CLOCK_PRESERVE) { 273 dev_dbg(i2c->dev, "using fdr %d\n", 274 readb(i2c->base + MPC_I2C_FDR)); 275 return; 276 } 277 278 ret = mpc_i2c_get_fdr_52xx(node, clock, &i2c->real_clk); 279 fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ 280 281 writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); 282 283 if (ret >= 0) 284 dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk, 285 fdr); 286 } 287 #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */ 288 static void mpc_i2c_setup_52xx(struct device_node *node, 289 struct mpc_i2c *i2c, 290 u32 clock) 291 { 292 } 293 #endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */ 294 295 #ifdef CONFIG_PPC_MPC512x 296 static void mpc_i2c_setup_512x(struct device_node *node, 297 struct mpc_i2c *i2c, 298 u32 clock) 299 { 300 struct device_node *node_ctrl; 301 void __iomem *ctrl; 302 const u32 *pval; 303 u32 idx; 304 305 /* Enable I2C interrupts for mpc5121 */ 306 node_ctrl = of_find_compatible_node(NULL, NULL, 307 "fsl,mpc5121-i2c-ctrl"); 308 if (node_ctrl) { 309 ctrl = of_iomap(node_ctrl, 0); 310 if (ctrl) { 311 /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */ 312 pval = of_get_property(node, "reg", NULL); 313 idx = (*pval & 0xff) / 0x20; 314 setbits32(ctrl, 1 << (24 + idx * 2)); 315 iounmap(ctrl); 316 } 317 of_node_put(node_ctrl); 318 } 319 320 /* The clock setup for the 52xx works also fine for the 512x */ 321 mpc_i2c_setup_52xx(node, i2c, clock); 322 } 323 #else /* CONFIG_PPC_MPC512x */ 324 static void mpc_i2c_setup_512x(struct device_node *node, 325 struct mpc_i2c *i2c, 326 u32 clock) 327 { 328 } 329 #endif /* CONFIG_PPC_MPC512x */ 330 331 #ifdef CONFIG_FSL_SOC 332 static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { 333 {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123}, 334 {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102}, 335 {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127}, 336 {544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105}, 337 {672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106}, 338 {800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107}, 339 {1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07}, 340 {1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a}, 341 {1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b}, 342 {2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e}, 343 {3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133}, 344 {4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136}, 345 {7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115}, 346 {12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b}, 347 {18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e}, 348 {30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d}, 349 {49152, 0x011e}, {61440, 0x011f} 350 }; 351 352 static u32 mpc_i2c_get_sec_cfg_8xxx(void) 353 { 354 struct device_node *node; 355 u32 __iomem *reg; 356 u32 val = 0; 357 358 node = of_find_node_by_name(NULL, "global-utilities"); 359 if (node) { 360 const u32 *prop = of_get_property(node, "reg", NULL); 361 if (prop) { 362 /* 363 * Map and check POR Device Status Register 2 364 * (PORDEVSR2) at 0xE0014. Note than while MPC8533 365 * and MPC8544 indicate SEC frequency ratio 366 * configuration as bit 26 in PORDEVSR2, other MPC8xxx 367 * parts may store it differently or may not have it 368 * at all. 369 */ 370 reg = ioremap(get_immrbase() + *prop + 0x14, 0x4); 371 if (!reg) 372 printk(KERN_ERR 373 "Error: couldn't map PORDEVSR2\n"); 374 else 375 val = in_be32(reg) & 0x00000020; /* sec-cfg */ 376 iounmap(reg); 377 } 378 } 379 of_node_put(node); 380 381 return val; 382 } 383 384 static u32 mpc_i2c_get_prescaler_8xxx(void) 385 { 386 /* 387 * According to the AN2919 all MPC824x have prescaler 1, while MPC83xx 388 * may have prescaler 1, 2, or 3, depending on the power-on 389 * configuration. 390 */ 391 u32 prescaler = 1; 392 393 /* mpc85xx */ 394 if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2) 395 || pvr_version_is(PVR_VER_E500MC) 396 || pvr_version_is(PVR_VER_E5500) 397 || pvr_version_is(PVR_VER_E6500)) { 398 unsigned int svr = mfspr(SPRN_SVR); 399 400 if ((SVR_SOC_VER(svr) == SVR_8540) 401 || (SVR_SOC_VER(svr) == SVR_8541) 402 || (SVR_SOC_VER(svr) == SVR_8560) 403 || (SVR_SOC_VER(svr) == SVR_8555) 404 || (SVR_SOC_VER(svr) == SVR_8610)) 405 /* the above 85xx SoCs have prescaler 1 */ 406 prescaler = 1; 407 else if ((SVR_SOC_VER(svr) == SVR_8533) 408 || (SVR_SOC_VER(svr) == SVR_8544)) 409 /* the above 85xx SoCs have prescaler 3 or 2 */ 410 prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2; 411 else 412 /* all the other 85xx have prescaler 2 */ 413 prescaler = 2; 414 } 415 416 return prescaler; 417 } 418 419 static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, 420 u32 *real_clk) 421 { 422 const struct mpc_i2c_divider *div = NULL; 423 u32 prescaler = mpc_i2c_get_prescaler_8xxx(); 424 u32 divider; 425 int i; 426 427 if (clock == MPC_I2C_CLOCK_LEGACY) { 428 /* see below - default fdr = 0x1031 -> div = 16 * 3072 */ 429 *real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072); 430 return -EINVAL; 431 } 432 433 divider = fsl_get_sys_freq() / clock / prescaler; 434 435 pr_debug("I2C: src_clock=%d clock=%d divider=%d\n", 436 fsl_get_sys_freq(), clock, divider); 437 438 /* 439 * We want to choose an FDR/DFSR that generates an I2C bus speed that 440 * is equal to or lower than the requested speed. 441 */ 442 for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) { 443 div = &mpc_i2c_dividers_8xxx[i]; 444 if (div->divider >= divider) 445 break; 446 } 447 448 *real_clk = fsl_get_sys_freq() / prescaler / div->divider; 449 return (int)div->fdr; 450 } 451 452 static void mpc_i2c_setup_8xxx(struct device_node *node, 453 struct mpc_i2c *i2c, 454 u32 clock) 455 { 456 int ret, fdr; 457 458 if (clock == MPC_I2C_CLOCK_PRESERVE) { 459 dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n", 460 readb(i2c->base + MPC_I2C_DFSRR), 461 readb(i2c->base + MPC_I2C_FDR)); 462 return; 463 } 464 465 ret = mpc_i2c_get_fdr_8xxx(node, clock, &i2c->real_clk); 466 fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ 467 468 writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); 469 writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR); 470 471 if (ret >= 0) 472 dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", 473 i2c->real_clk, fdr >> 8, fdr & 0xff); 474 } 475 476 #else /* !CONFIG_FSL_SOC */ 477 static void mpc_i2c_setup_8xxx(struct device_node *node, 478 struct mpc_i2c *i2c, 479 u32 clock) 480 { 481 } 482 #endif /* CONFIG_FSL_SOC */ 483 484 static void mpc_i2c_finish(struct mpc_i2c *i2c, int rc) 485 { 486 i2c->rc = rc; 487 i2c->block = 0; 488 i2c->cntl_bits = CCR_MEN; 489 writeccr(i2c, i2c->cntl_bits); 490 wake_up(&i2c->waitq); 491 } 492 493 static void mpc_i2c_do_action(struct mpc_i2c *i2c) 494 { 495 struct i2c_msg *msg = &i2c->msgs[i2c->curr_msg]; 496 int dir = 0; 497 int recv_len = 0; 498 u8 byte; 499 500 dev_dbg(i2c->dev, "action = %s\n", action_str[i2c->action]); 501 502 i2c->cntl_bits &= ~(CCR_RSTA | CCR_MTX | CCR_TXAK); 503 504 if (msg->flags & I2C_M_RD) 505 dir = 1; 506 if (msg->flags & I2C_M_RECV_LEN) 507 recv_len = 1; 508 509 switch (i2c->action) { 510 case MPC_I2C_ACTION_RESTART: 511 i2c->cntl_bits |= CCR_RSTA; 512 fallthrough; 513 514 case MPC_I2C_ACTION_START: 515 i2c->cntl_bits |= CCR_MSTA | CCR_MTX; 516 writeccr(i2c, i2c->cntl_bits); 517 writeb((msg->addr << 1) | dir, i2c->base + MPC_I2C_DR); 518 i2c->expect_rxack = 1; 519 i2c->action = dir ? MPC_I2C_ACTION_READ_BEGIN : MPC_I2C_ACTION_WRITE; 520 break; 521 522 case MPC_I2C_ACTION_READ_BEGIN: 523 if (msg->len) { 524 if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN)) 525 i2c->cntl_bits |= CCR_TXAK; 526 527 writeccr(i2c, i2c->cntl_bits); 528 /* Dummy read */ 529 readb(i2c->base + MPC_I2C_DR); 530 } 531 i2c->action = MPC_I2C_ACTION_READ_BYTE; 532 break; 533 534 case MPC_I2C_ACTION_READ_BYTE: 535 if (i2c->byte_posn || !recv_len) { 536 /* Generate Tx ACK on next to last byte */ 537 if (i2c->byte_posn == msg->len - 2) 538 i2c->cntl_bits |= CCR_TXAK; 539 /* Do not generate stop on last byte */ 540 if (i2c->byte_posn == msg->len - 1) 541 i2c->cntl_bits |= CCR_MTX; 542 543 writeccr(i2c, i2c->cntl_bits); 544 } 545 546 byte = readb(i2c->base + MPC_I2C_DR); 547 548 if (i2c->byte_posn == 0 && recv_len) { 549 if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX) { 550 mpc_i2c_finish(i2c, -EPROTO); 551 return; 552 } 553 msg->len += byte; 554 /* 555 * For block reads, generate Tx ACK here if data length 556 * is 1 byte (total length is 2 bytes). 557 */ 558 if (msg->len == 2) { 559 i2c->cntl_bits |= CCR_TXAK; 560 writeccr(i2c, i2c->cntl_bits); 561 } 562 } 563 564 dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action], byte); 565 msg->buf[i2c->byte_posn++] = byte; 566 break; 567 568 case MPC_I2C_ACTION_WRITE: 569 dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action], 570 msg->buf[i2c->byte_posn]); 571 writeb(msg->buf[i2c->byte_posn++], i2c->base + MPC_I2C_DR); 572 i2c->expect_rxack = 1; 573 break; 574 575 case MPC_I2C_ACTION_STOP: 576 mpc_i2c_finish(i2c, 0); 577 break; 578 579 default: 580 WARN(1, "Unexpected action %d\n", i2c->action); 581 break; 582 } 583 584 if (msg->len == i2c->byte_posn) { 585 i2c->curr_msg++; 586 i2c->byte_posn = 0; 587 588 if (i2c->curr_msg == i2c->num_msgs) { 589 i2c->action = MPC_I2C_ACTION_STOP; 590 /* 591 * We don't get another interrupt on read so 592 * finish the transfer now 593 */ 594 if (dir) 595 mpc_i2c_finish(i2c, 0); 596 } else { 597 i2c->action = MPC_I2C_ACTION_RESTART; 598 } 599 } 600 } 601 602 static void mpc_i2c_do_intr(struct mpc_i2c *i2c, u8 status) 603 { 604 spin_lock(&i2c->lock); 605 606 if (!(status & CSR_MCF)) { 607 dev_dbg(i2c->dev, "unfinished\n"); 608 mpc_i2c_finish(i2c, -EIO); 609 goto out; 610 } 611 612 if (status & CSR_MAL) { 613 dev_dbg(i2c->dev, "arbitration lost\n"); 614 mpc_i2c_finish(i2c, -EAGAIN); 615 goto out; 616 } 617 618 if (i2c->expect_rxack && (status & CSR_RXAK)) { 619 dev_dbg(i2c->dev, "no Rx ACK\n"); 620 mpc_i2c_finish(i2c, -ENXIO); 621 goto out; 622 } 623 i2c->expect_rxack = 0; 624 625 mpc_i2c_do_action(i2c); 626 627 out: 628 spin_unlock(&i2c->lock); 629 } 630 631 static irqreturn_t mpc_i2c_isr(int irq, void *dev_id) 632 { 633 struct mpc_i2c *i2c = dev_id; 634 u8 status; 635 636 status = readb(i2c->base + MPC_I2C_SR); 637 if (status & CSR_MIF) { 638 /* Wait up to 100us for transfer to properly complete */ 639 readb_poll_timeout_atomic(i2c->base + MPC_I2C_SR, status, status & CSR_MCF, 0, 100); 640 writeb(0, i2c->base + MPC_I2C_SR); 641 mpc_i2c_do_intr(i2c, status); 642 return IRQ_HANDLED; 643 } 644 return IRQ_NONE; 645 } 646 647 static int mpc_i2c_wait_for_completion(struct mpc_i2c *i2c) 648 { 649 long time_left; 650 651 time_left = wait_event_timeout(i2c->waitq, !i2c->block, i2c->adap.timeout); 652 if (!time_left) 653 return -ETIMEDOUT; 654 if (time_left < 0) 655 return time_left; 656 657 return 0; 658 } 659 660 static int mpc_i2c_execute_msg(struct mpc_i2c *i2c) 661 { 662 unsigned long orig_jiffies; 663 unsigned long flags; 664 int ret; 665 666 spin_lock_irqsave(&i2c->lock, flags); 667 668 i2c->curr_msg = 0; 669 i2c->rc = 0; 670 i2c->byte_posn = 0; 671 i2c->block = 1; 672 i2c->action = MPC_I2C_ACTION_START; 673 674 i2c->cntl_bits = CCR_MEN | CCR_MIEN; 675 writeb(0, i2c->base + MPC_I2C_SR); 676 writeccr(i2c, i2c->cntl_bits); 677 678 mpc_i2c_do_action(i2c); 679 680 spin_unlock_irqrestore(&i2c->lock, flags); 681 682 ret = mpc_i2c_wait_for_completion(i2c); 683 if (ret) 684 i2c->rc = ret; 685 686 if (i2c->rc == -EIO || i2c->rc == -EAGAIN || i2c->rc == -ETIMEDOUT) 687 i2c_recover_bus(&i2c->adap); 688 689 orig_jiffies = jiffies; 690 /* Wait until STOP is seen, allow up to 1 s */ 691 while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { 692 if (time_after(jiffies, orig_jiffies + HZ)) { 693 u8 status = readb(i2c->base + MPC_I2C_SR); 694 695 dev_dbg(i2c->dev, "timeout\n"); 696 if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { 697 writeb(status & ~CSR_MAL, 698 i2c->base + MPC_I2C_SR); 699 i2c_recover_bus(&i2c->adap); 700 } 701 return -EIO; 702 } 703 cond_resched(); 704 } 705 706 return i2c->rc; 707 } 708 709 static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) 710 { 711 int rc, ret = num; 712 struct mpc_i2c *i2c = i2c_get_adapdata(adap); 713 int i; 714 715 dev_dbg(i2c->dev, "num = %d\n", num); 716 for (i = 0; i < num; i++) 717 dev_dbg(i2c->dev, " addr = %02x, flags = %02x, len = %d, %*ph\n", 718 msgs[i].addr, msgs[i].flags, msgs[i].len, 719 msgs[i].flags & I2C_M_RD ? 0 : msgs[i].len, 720 msgs[i].buf); 721 722 WARN_ON(i2c->msgs != NULL); 723 i2c->msgs = msgs; 724 i2c->num_msgs = num; 725 726 rc = mpc_i2c_execute_msg(i2c); 727 if (rc < 0) 728 ret = rc; 729 730 i2c->num_msgs = 0; 731 i2c->msgs = NULL; 732 733 return ret; 734 } 735 736 static u32 mpc_functionality(struct i2c_adapter *adap) 737 { 738 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL 739 | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL; 740 } 741 742 static int fsl_i2c_bus_recovery(struct i2c_adapter *adap) 743 { 744 struct mpc_i2c *i2c = i2c_get_adapdata(adap); 745 746 if (i2c->has_errata_A004447) 747 mpc_i2c_fixup_A004447(i2c); 748 else 749 mpc_i2c_fixup(i2c); 750 751 return 0; 752 } 753 754 static const struct i2c_algorithm mpc_algo = { 755 .master_xfer = mpc_xfer, 756 .functionality = mpc_functionality, 757 }; 758 759 static struct i2c_adapter mpc_ops = { 760 .owner = THIS_MODULE, 761 .algo = &mpc_algo, 762 .timeout = HZ, 763 }; 764 765 static struct i2c_bus_recovery_info fsl_i2c_recovery_info = { 766 .recover_bus = fsl_i2c_bus_recovery, 767 }; 768 769 static int fsl_i2c_probe(struct platform_device *op) 770 { 771 const struct mpc_i2c_data *data; 772 struct mpc_i2c *i2c; 773 const u32 *prop; 774 u32 clock = MPC_I2C_CLOCK_LEGACY; 775 int result = 0; 776 int plen; 777 struct clk *clk; 778 int err; 779 780 i2c = devm_kzalloc(&op->dev, sizeof(*i2c), GFP_KERNEL); 781 if (!i2c) 782 return -ENOMEM; 783 784 i2c->dev = &op->dev; /* for debug and error output */ 785 786 init_waitqueue_head(&i2c->waitq); 787 spin_lock_init(&i2c->lock); 788 789 i2c->base = devm_platform_ioremap_resource(op, 0); 790 if (IS_ERR(i2c->base)) 791 return PTR_ERR(i2c->base); 792 793 i2c->irq = platform_get_irq(op, 0); 794 if (i2c->irq < 0) 795 return i2c->irq; 796 797 result = devm_request_irq(&op->dev, i2c->irq, mpc_i2c_isr, 798 IRQF_SHARED, "i2c-mpc", i2c); 799 if (result < 0) { 800 dev_err(i2c->dev, "failed to attach interrupt\n"); 801 return result; 802 } 803 804 /* 805 * enable clock for the I2C peripheral (non fatal), 806 * keep a reference upon successful allocation 807 */ 808 clk = devm_clk_get_optional(&op->dev, NULL); 809 if (IS_ERR(clk)) 810 return PTR_ERR(clk); 811 812 err = clk_prepare_enable(clk); 813 if (err) { 814 dev_err(&op->dev, "failed to enable clock\n"); 815 return err; 816 } 817 818 i2c->clk_per = clk; 819 820 if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) { 821 clock = MPC_I2C_CLOCK_PRESERVE; 822 } else { 823 prop = of_get_property(op->dev.of_node, "clock-frequency", 824 &plen); 825 if (prop && plen == sizeof(u32)) 826 clock = *prop; 827 } 828 829 data = device_get_match_data(&op->dev); 830 if (data) { 831 data->setup(op->dev.of_node, i2c, clock); 832 } else { 833 /* Backwards compatibility */ 834 if (of_get_property(op->dev.of_node, "dfsrr", NULL)) 835 mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock); 836 } 837 838 prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen); 839 if (prop && plen == sizeof(u32)) { 840 mpc_ops.timeout = *prop * HZ / 1000000; 841 if (mpc_ops.timeout < 5) 842 mpc_ops.timeout = 5; 843 } 844 dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ); 845 846 if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447")) 847 i2c->has_errata_A004447 = true; 848 849 i2c->adap = mpc_ops; 850 scnprintf(i2c->adap.name, sizeof(i2c->adap.name), 851 "MPC adapter (%s)", of_node_full_name(op->dev.of_node)); 852 i2c->adap.dev.parent = &op->dev; 853 i2c->adap.nr = op->id; 854 i2c->adap.dev.of_node = of_node_get(op->dev.of_node); 855 i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info; 856 platform_set_drvdata(op, i2c); 857 i2c_set_adapdata(&i2c->adap, i2c); 858 859 result = i2c_add_numbered_adapter(&i2c->adap); 860 if (result) 861 goto fail_add; 862 863 return 0; 864 865 fail_add: 866 clk_disable_unprepare(i2c->clk_per); 867 868 return result; 869 }; 870 871 static int fsl_i2c_remove(struct platform_device *op) 872 { 873 struct mpc_i2c *i2c = platform_get_drvdata(op); 874 875 i2c_del_adapter(&i2c->adap); 876 877 clk_disable_unprepare(i2c->clk_per); 878 879 return 0; 880 }; 881 882 static int __maybe_unused mpc_i2c_suspend(struct device *dev) 883 { 884 struct mpc_i2c *i2c = dev_get_drvdata(dev); 885 886 i2c->fdr = readb(i2c->base + MPC_I2C_FDR); 887 i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR); 888 889 return 0; 890 } 891 892 static int __maybe_unused mpc_i2c_resume(struct device *dev) 893 { 894 struct mpc_i2c *i2c = dev_get_drvdata(dev); 895 896 writeb(i2c->fdr, i2c->base + MPC_I2C_FDR); 897 writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR); 898 899 return 0; 900 } 901 static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume); 902 903 static const struct mpc_i2c_data mpc_i2c_data_512x = { 904 .setup = mpc_i2c_setup_512x, 905 }; 906 907 static const struct mpc_i2c_data mpc_i2c_data_52xx = { 908 .setup = mpc_i2c_setup_52xx, 909 }; 910 911 static const struct mpc_i2c_data mpc_i2c_data_8313 = { 912 .setup = mpc_i2c_setup_8xxx, 913 }; 914 915 static const struct mpc_i2c_data mpc_i2c_data_8543 = { 916 .setup = mpc_i2c_setup_8xxx, 917 }; 918 919 static const struct mpc_i2c_data mpc_i2c_data_8544 = { 920 .setup = mpc_i2c_setup_8xxx, 921 }; 922 923 static const struct of_device_id mpc_i2c_of_match[] = { 924 {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, 925 {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, }, 926 {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, 927 {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, }, 928 {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, }, 929 {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, }, 930 {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, }, 931 /* Backward compatibility */ 932 {.compatible = "fsl-i2c", }, 933 {}, 934 }; 935 MODULE_DEVICE_TABLE(of, mpc_i2c_of_match); 936 937 /* Structure for a device driver */ 938 static struct platform_driver mpc_i2c_driver = { 939 .probe = fsl_i2c_probe, 940 .remove = fsl_i2c_remove, 941 .driver = { 942 .name = DRV_NAME, 943 .of_match_table = mpc_i2c_of_match, 944 .pm = &mpc_i2c_pm_ops, 945 }, 946 }; 947 948 module_platform_driver(mpc_i2c_driver); 949 950 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); 951 MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and " 952 "MPC824x/83xx/85xx/86xx/512x/52xx processors"); 953 MODULE_LICENSE("GPL"); 954