1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * I2C driver for stand-alone PCF8584 style adapters on Zorro cards 4 * 5 * Original ICY documentation can be found on Aminet: 6 * https://aminet.net/package/docs/hard/icy 7 * 8 * There has been a modern community re-print of this design in 2019: 9 * https://www.a1k.org/forum/index.php?threads/70106/ 10 * 11 * The card is basically a Philips PCF8584 connected straight to the 12 * beginning of the AutoConfig'd address space (register S1 on base+2), 13 * with /INT on /INT2 on the Zorro bus. 14 * 15 * Copyright (c) 2019 Max Staudt <max@enpas.org> 16 * 17 * This started as a fork of i2c-elektor.c and has evolved since. 18 * Thanks go to its authors for providing a base to grow on. 19 * 20 * 21 * IRQ support is currently not implemented. 22 * 23 * As it turns out, i2c-algo-pcf is really written with i2c-elektor's 24 * edge-triggered ISA interrupts in mind, while the Amiga's Zorro bus has 25 * level-triggered interrupts. This means that once an interrupt occurs, we 26 * have to tell the PCF8584 to shut up immediately, or it will keep the 27 * interrupt line busy and cause an IRQ storm. 28 29 * However, because of the PCF8584's host-side protocol, there is no good 30 * way to just quieten it without side effects. Rather, we have to perform 31 * the next read/write operation straight away, which will reset the /INT 32 * pin. This entails re-designing the core of i2c-algo-pcf in the future. 33 * For now, we never request an IRQ from the PCF8584, and poll it instead. 34 */ 35 36 #include <linux/delay.h> 37 #include <linux/init.h> 38 #include <linux/io.h> 39 #include <linux/ioport.h> 40 #include <linux/kernel.h> 41 #include <linux/module.h> 42 43 #include <linux/i2c.h> 44 #include <linux/i2c-algo-pcf.h> 45 46 #include <asm/amigahw.h> 47 #include <asm/amigaints.h> 48 #include <linux/zorro.h> 49 50 #include "../algos/i2c-algo-pcf.h" 51 52 struct icy_i2c { 53 struct i2c_adapter adapter; 54 55 void __iomem *reg_s0; 56 void __iomem *reg_s1; 57 struct fwnode_handle *ltc2990_fwnode; 58 struct i2c_client *ltc2990_client; 59 }; 60 61 /* 62 * Functions called by i2c-algo-pcf 63 */ 64 static void icy_pcf_setpcf(void *data, int ctl, int val) 65 { 66 struct icy_i2c *i2c = (struct icy_i2c *)data; 67 68 u8 __iomem *address = ctl ? i2c->reg_s1 : i2c->reg_s0; 69 70 z_writeb(val, address); 71 } 72 73 static int icy_pcf_getpcf(void *data, int ctl) 74 { 75 struct icy_i2c *i2c = (struct icy_i2c *)data; 76 77 u8 __iomem *address = ctl ? i2c->reg_s1 : i2c->reg_s0; 78 79 return z_readb(address); 80 } 81 82 static int icy_pcf_getown(void *data) 83 { 84 return 0x55; 85 } 86 87 static int icy_pcf_getclock(void *data) 88 { 89 return 0x1c; 90 } 91 92 static void icy_pcf_waitforpin(void *data) 93 { 94 usleep_range(50, 150); 95 } 96 97 /* 98 * Main i2c-icy part 99 */ 100 static unsigned short const icy_ltc2990_addresses[] = { 101 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END 102 }; 103 104 /* 105 * Additional sensors exposed once this property is applied: 106 * 107 * in1 will be the voltage of the 5V rail, divided by 2. 108 * in2 will be the voltage of the 12V rail, divided by 4. 109 * temp3 will be measured using a PCB loop next the chip. 110 */ 111 static const u32 icy_ltc2990_meas_mode[] = {0, 3}; 112 113 static const struct property_entry icy_ltc2990_props[] = { 114 PROPERTY_ENTRY_U32_ARRAY("lltc,meas-mode", icy_ltc2990_meas_mode), 115 { } 116 }; 117 118 static int icy_probe(struct zorro_dev *z, 119 const struct zorro_device_id *ent) 120 { 121 struct icy_i2c *i2c; 122 struct i2c_algo_pcf_data *algo_data; 123 struct fwnode_handle *new_fwnode; 124 struct i2c_board_info ltc2990_info = { 125 .type = "ltc2990", 126 }; 127 128 i2c = devm_kzalloc(&z->dev, sizeof(*i2c), GFP_KERNEL); 129 if (!i2c) 130 return -ENOMEM; 131 132 algo_data = devm_kzalloc(&z->dev, sizeof(*algo_data), GFP_KERNEL); 133 if (!algo_data) 134 return -ENOMEM; 135 136 dev_set_drvdata(&z->dev, i2c); 137 i2c->adapter.dev.parent = &z->dev; 138 i2c->adapter.owner = THIS_MODULE; 139 /* i2c->adapter.algo assigned by i2c_pcf_add_bus() */ 140 i2c->adapter.algo_data = algo_data; 141 strlcpy(i2c->adapter.name, "ICY I2C Zorro adapter", 142 sizeof(i2c->adapter.name)); 143 144 if (!devm_request_mem_region(&z->dev, 145 z->resource.start, 146 4, i2c->adapter.name)) 147 return -ENXIO; 148 149 /* Driver private data */ 150 i2c->reg_s0 = ZTWO_VADDR(z->resource.start); 151 i2c->reg_s1 = ZTWO_VADDR(z->resource.start + 2); 152 153 algo_data->data = i2c; 154 algo_data->setpcf = icy_pcf_setpcf; 155 algo_data->getpcf = icy_pcf_getpcf; 156 algo_data->getown = icy_pcf_getown; 157 algo_data->getclock = icy_pcf_getclock; 158 algo_data->waitforpin = icy_pcf_waitforpin; 159 160 if (i2c_pcf_add_bus(&i2c->adapter)) { 161 dev_err(&z->dev, "i2c_pcf_add_bus() failed\n"); 162 return -ENXIO; 163 } 164 165 dev_info(&z->dev, "ICY I2C controller at %pa, IRQ not implemented\n", 166 &z->resource.start); 167 168 /* 169 * The 2019 a1k.org PCBs have an LTC2990 at 0x4c, so start 170 * it automatically once ltc2990 is modprobed. 171 * 172 * in0 is the voltage of the internal 5V power supply. 173 * temp1 is the temperature inside the chip. 174 * 175 * See property_entry above for in1, in2, temp3. 176 */ 177 new_fwnode = fwnode_create_software_node(icy_ltc2990_props, NULL); 178 if (IS_ERR(new_fwnode)) { 179 dev_info(&z->dev, "Failed to create fwnode for LTC2990, error: %ld\n", 180 PTR_ERR(new_fwnode)); 181 } else { 182 /* 183 * Store the fwnode so we can destroy it on .remove(). 184 * Only store it on success, as fwnode_remove_software_node() 185 * is NULL safe, but not PTR_ERR safe. 186 */ 187 i2c->ltc2990_fwnode = new_fwnode; 188 ltc2990_info.fwnode = new_fwnode; 189 190 i2c->ltc2990_client = 191 i2c_new_scanned_device(&i2c->adapter, 192 <c2990_info, 193 icy_ltc2990_addresses, 194 NULL); 195 } 196 197 return 0; 198 } 199 200 static void icy_remove(struct zorro_dev *z) 201 { 202 struct icy_i2c *i2c = dev_get_drvdata(&z->dev); 203 204 i2c_unregister_device(i2c->ltc2990_client); 205 fwnode_remove_software_node(i2c->ltc2990_fwnode); 206 207 i2c_del_adapter(&i2c->adapter); 208 } 209 210 static const struct zorro_device_id icy_zorro_tbl[] = { 211 { ZORRO_ID(VMC, 15, 0), }, 212 { 0 } 213 }; 214 215 MODULE_DEVICE_TABLE(zorro, icy_zorro_tbl); 216 217 static struct zorro_driver icy_driver = { 218 .name = "i2c-icy", 219 .id_table = icy_zorro_tbl, 220 .probe = icy_probe, 221 .remove = icy_remove, 222 }; 223 224 module_driver(icy_driver, 225 zorro_register_driver, 226 zorro_unregister_driver); 227 228 MODULE_AUTHOR("Max Staudt <max@enpas.org>"); 229 MODULE_DESCRIPTION("I2C bus via PCF8584 on ICY Zorro card"); 230 MODULE_LICENSE("GPL v2"); 231