1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * I2C driver for stand-alone PCF8584 style adapters on Zorro cards 4 * 5 * Original ICY documentation can be found on Aminet: 6 * https://aminet.net/package/docs/hard/icy 7 * 8 * There has been a modern community re-print of this design in 2019: 9 * https://www.a1k.org/forum/index.php?threads/70106/ 10 * 11 * The card is basically a Philips PCF8584 connected straight to the 12 * beginning of the AutoConfig'd address space (register S1 on base+2), 13 * with /INT on /INT2 on the Zorro bus. 14 * 15 * Copyright (c) 2019 Max Staudt <max@enpas.org> 16 * 17 * This started as a fork of i2c-elektor.c and has evolved since. 18 * Thanks go to its authors for providing a base to grow on. 19 * 20 * 21 * IRQ support is currently not implemented. 22 * 23 * As it turns out, i2c-algo-pcf is really written with i2c-elektor's 24 * edge-triggered ISA interrupts in mind, while the Amiga's Zorro bus has 25 * level-triggered interrupts. This means that once an interrupt occurs, we 26 * have to tell the PCF8584 to shut up immediately, or it will keep the 27 * interrupt line busy and cause an IRQ storm. 28 29 * However, because of the PCF8584's host-side protocol, there is no good 30 * way to just quieten it without side effects. Rather, we have to perform 31 * the next read/write operation straight away, which will reset the /INT 32 * pin. This entails re-designing the core of i2c-algo-pcf in the future. 33 * For now, we never request an IRQ from the PCF8584, and poll it instead. 34 */ 35 36 #include <linux/delay.h> 37 #include <linux/init.h> 38 #include <linux/io.h> 39 #include <linux/ioport.h> 40 #include <linux/kernel.h> 41 #include <linux/module.h> 42 43 #include <linux/i2c.h> 44 #include <linux/i2c-algo-pcf.h> 45 46 #include <asm/amigaints.h> 47 #include <linux/zorro.h> 48 49 #include "../algos/i2c-algo-pcf.h" 50 51 struct icy_i2c { 52 struct i2c_adapter adapter; 53 54 void __iomem *reg_s0; 55 void __iomem *reg_s1; 56 struct fwnode_handle *ltc2990_fwnode; 57 struct i2c_client *ltc2990_client; 58 }; 59 60 /* 61 * Functions called by i2c-algo-pcf 62 */ 63 static void icy_pcf_setpcf(void *data, int ctl, int val) 64 { 65 struct icy_i2c *i2c = (struct icy_i2c *)data; 66 67 u8 __iomem *address = ctl ? i2c->reg_s1 : i2c->reg_s0; 68 69 z_writeb(val, address); 70 } 71 72 static int icy_pcf_getpcf(void *data, int ctl) 73 { 74 struct icy_i2c *i2c = (struct icy_i2c *)data; 75 76 u8 __iomem *address = ctl ? i2c->reg_s1 : i2c->reg_s0; 77 78 return z_readb(address); 79 } 80 81 static int icy_pcf_getown(void *data) 82 { 83 return 0x55; 84 } 85 86 static int icy_pcf_getclock(void *data) 87 { 88 return 0x1c; 89 } 90 91 static void icy_pcf_waitforpin(void *data) 92 { 93 usleep_range(50, 150); 94 } 95 96 /* 97 * Main i2c-icy part 98 */ 99 static unsigned short const icy_ltc2990_addresses[] = { 100 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END 101 }; 102 103 /* 104 * Additional sensors exposed once this property is applied: 105 * 106 * in1 will be the voltage of the 5V rail, divided by 2. 107 * in2 will be the voltage of the 12V rail, divided by 4. 108 * temp3 will be measured using a PCB loop next the chip. 109 */ 110 static const u32 icy_ltc2990_meas_mode[] = {0, 3}; 111 112 static const struct property_entry icy_ltc2990_props[] = { 113 PROPERTY_ENTRY_U32_ARRAY("lltc,meas-mode", icy_ltc2990_meas_mode), 114 { } 115 }; 116 117 static int icy_probe(struct zorro_dev *z, 118 const struct zorro_device_id *ent) 119 { 120 struct icy_i2c *i2c; 121 struct i2c_algo_pcf_data *algo_data; 122 struct fwnode_handle *new_fwnode; 123 struct i2c_board_info ltc2990_info = { 124 .type = "ltc2990", 125 }; 126 127 i2c = devm_kzalloc(&z->dev, sizeof(*i2c), GFP_KERNEL); 128 if (!i2c) 129 return -ENOMEM; 130 131 algo_data = devm_kzalloc(&z->dev, sizeof(*algo_data), GFP_KERNEL); 132 if (!algo_data) 133 return -ENOMEM; 134 135 dev_set_drvdata(&z->dev, i2c); 136 i2c->adapter.dev.parent = &z->dev; 137 i2c->adapter.owner = THIS_MODULE; 138 /* i2c->adapter.algo assigned by i2c_pcf_add_bus() */ 139 i2c->adapter.algo_data = algo_data; 140 strlcpy(i2c->adapter.name, "ICY I2C Zorro adapter", 141 sizeof(i2c->adapter.name)); 142 143 if (!devm_request_mem_region(&z->dev, 144 z->resource.start, 145 4, i2c->adapter.name)) 146 return -ENXIO; 147 148 /* Driver private data */ 149 i2c->reg_s0 = ZTWO_VADDR(z->resource.start); 150 i2c->reg_s1 = ZTWO_VADDR(z->resource.start + 2); 151 152 algo_data->data = i2c; 153 algo_data->setpcf = icy_pcf_setpcf; 154 algo_data->getpcf = icy_pcf_getpcf; 155 algo_data->getown = icy_pcf_getown; 156 algo_data->getclock = icy_pcf_getclock; 157 algo_data->waitforpin = icy_pcf_waitforpin; 158 159 if (i2c_pcf_add_bus(&i2c->adapter)) { 160 dev_err(&z->dev, "i2c_pcf_add_bus() failed\n"); 161 return -ENXIO; 162 } 163 164 dev_info(&z->dev, "ICY I2C controller at %pa, IRQ not implemented\n", 165 &z->resource.start); 166 167 /* 168 * The 2019 a1k.org PCBs have an LTC2990 at 0x4c, so start 169 * it automatically once ltc2990 is modprobed. 170 * 171 * in0 is the voltage of the internal 5V power supply. 172 * temp1 is the temperature inside the chip. 173 * 174 * See property_entry above for in1, in2, temp3. 175 */ 176 new_fwnode = fwnode_create_software_node(icy_ltc2990_props, NULL); 177 if (IS_ERR(new_fwnode)) { 178 dev_info(&z->dev, "Failed to create fwnode for LTC2990, error: %ld\n", 179 PTR_ERR(new_fwnode)); 180 } else { 181 /* 182 * Store the fwnode so we can destroy it on .remove(). 183 * Only store it on success, as fwnode_remove_software_node() 184 * is NULL safe, but not PTR_ERR safe. 185 */ 186 i2c->ltc2990_fwnode = new_fwnode; 187 ltc2990_info.fwnode = new_fwnode; 188 189 i2c->ltc2990_client = 190 i2c_new_scanned_device(&i2c->adapter, 191 <c2990_info, 192 icy_ltc2990_addresses, 193 NULL); 194 } 195 196 return 0; 197 } 198 199 static void icy_remove(struct zorro_dev *z) 200 { 201 struct icy_i2c *i2c = dev_get_drvdata(&z->dev); 202 203 i2c_unregister_device(i2c->ltc2990_client); 204 fwnode_remove_software_node(i2c->ltc2990_fwnode); 205 206 i2c_del_adapter(&i2c->adapter); 207 } 208 209 static const struct zorro_device_id icy_zorro_tbl[] = { 210 { ZORRO_ID(VMC, 15, 0), }, 211 { 0 } 212 }; 213 214 MODULE_DEVICE_TABLE(zorro, icy_zorro_tbl); 215 216 static struct zorro_driver icy_driver = { 217 .name = "i2c-icy", 218 .id_table = icy_zorro_tbl, 219 .probe = icy_probe, 220 .remove = icy_remove, 221 }; 222 223 module_driver(icy_driver, 224 zorro_register_driver, 225 zorro_unregister_driver); 226 227 MODULE_AUTHOR("Max Staudt <max@enpas.org>"); 228 MODULE_DESCRIPTION("I2C bus via PCF8584 on ICY Zorro card"); 229 MODULE_LICENSE("GPL v2"); 230