1 /* 2 Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, 3 Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker 4 <mdsxyz123@yahoo.com> 5 Copyright (C) 2007 - 2012 Jean Delvare <khali@linux-fr.org> 6 Copyright (C) 2010 Intel Corporation, 7 David Woodhouse <dwmw2@infradead.org> 8 9 This program is free software; you can redistribute it and/or modify 10 it under the terms of the GNU General Public License as published by 11 the Free Software Foundation; either version 2 of the License, or 12 (at your option) any later version. 13 14 This program is distributed in the hope that it will be useful, 15 but WITHOUT ANY WARRANTY; without even the implied warranty of 16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 GNU General Public License for more details. 18 19 You should have received a copy of the GNU General Public License 20 along with this program; if not, write to the Free Software 21 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 22 */ 23 24 /* 25 Supports the following Intel I/O Controller Hubs (ICH): 26 27 I/O Block I2C 28 region SMBus Block proc. block 29 Chip name PCI ID size PEC buffer call read 30 ---------------------------------------------------------------------- 31 82801AA (ICH) 0x2413 16 no no no no 32 82801AB (ICH0) 0x2423 16 no no no no 33 82801BA (ICH2) 0x2443 16 no no no no 34 82801CA (ICH3) 0x2483 32 soft no no no 35 82801DB (ICH4) 0x24c3 32 hard yes no no 36 82801E (ICH5) 0x24d3 32 hard yes yes yes 37 6300ESB 0x25a4 32 hard yes yes yes 38 82801F (ICH6) 0x266a 32 hard yes yes yes 39 6310ESB/6320ESB 0x269b 32 hard yes yes yes 40 82801G (ICH7) 0x27da 32 hard yes yes yes 41 82801H (ICH8) 0x283e 32 hard yes yes yes 42 82801I (ICH9) 0x2930 32 hard yes yes yes 43 EP80579 (Tolapai) 0x5032 32 hard yes yes yes 44 ICH10 0x3a30 32 hard yes yes yes 45 ICH10 0x3a60 32 hard yes yes yes 46 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes 47 6 Series (PCH) 0x1c22 32 hard yes yes yes 48 Patsburg (PCH) 0x1d22 32 hard yes yes yes 49 Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes 50 Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes 51 Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes 52 DH89xxCC (PCH) 0x2330 32 hard yes yes yes 53 Panther Point (PCH) 0x1e22 32 hard yes yes yes 54 Lynx Point (PCH) 0x8c22 32 hard yes yes yes 55 56 Features supported by this driver: 57 Software PEC no 58 Hardware PEC yes 59 Block buffer yes 60 Block process call transaction no 61 I2C block read transaction yes (doesn't use the block buffer) 62 Slave mode no 63 64 See the file Documentation/i2c/busses/i2c-i801 for details. 65 */ 66 67 #include <linux/module.h> 68 #include <linux/pci.h> 69 #include <linux/kernel.h> 70 #include <linux/stddef.h> 71 #include <linux/delay.h> 72 #include <linux/ioport.h> 73 #include <linux/init.h> 74 #include <linux/i2c.h> 75 #include <linux/acpi.h> 76 #include <linux/io.h> 77 #include <linux/dmi.h> 78 #include <linux/slab.h> 79 80 /* I801 SMBus address offsets */ 81 #define SMBHSTSTS(p) (0 + (p)->smba) 82 #define SMBHSTCNT(p) (2 + (p)->smba) 83 #define SMBHSTCMD(p) (3 + (p)->smba) 84 #define SMBHSTADD(p) (4 + (p)->smba) 85 #define SMBHSTDAT0(p) (5 + (p)->smba) 86 #define SMBHSTDAT1(p) (6 + (p)->smba) 87 #define SMBBLKDAT(p) (7 + (p)->smba) 88 #define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */ 89 #define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */ 90 #define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */ 91 92 /* PCI Address Constants */ 93 #define SMBBAR 4 94 #define SMBHSTCFG 0x040 95 96 /* Host configuration bits for SMBHSTCFG */ 97 #define SMBHSTCFG_HST_EN 1 98 #define SMBHSTCFG_SMB_SMI_EN 2 99 #define SMBHSTCFG_I2C_EN 4 100 101 /* Auxiliary control register bits, ICH4+ only */ 102 #define SMBAUXCTL_CRC 1 103 #define SMBAUXCTL_E32B 2 104 105 /* kill bit for SMBHSTCNT */ 106 #define SMBHSTCNT_KILL 2 107 108 /* Other settings */ 109 #define MAX_RETRIES 400 110 #define ENABLE_INT9 0 /* set to 0x01 to enable - untested */ 111 112 /* I801 command constants */ 113 #define I801_QUICK 0x00 114 #define I801_BYTE 0x04 115 #define I801_BYTE_DATA 0x08 116 #define I801_WORD_DATA 0x0C 117 #define I801_PROC_CALL 0x10 /* unimplemented */ 118 #define I801_BLOCK_DATA 0x14 119 #define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */ 120 #define I801_BLOCK_LAST 0x34 121 #define I801_I2C_BLOCK_LAST 0x38 /* ICH5 and later */ 122 #define I801_START 0x40 123 #define I801_PEC_EN 0x80 /* ICH3 and later */ 124 125 /* I801 Hosts Status register bits */ 126 #define SMBHSTSTS_BYTE_DONE 0x80 127 #define SMBHSTSTS_INUSE_STS 0x40 128 #define SMBHSTSTS_SMBALERT_STS 0x20 129 #define SMBHSTSTS_FAILED 0x10 130 #define SMBHSTSTS_BUS_ERR 0x08 131 #define SMBHSTSTS_DEV_ERR 0x04 132 #define SMBHSTSTS_INTR 0x02 133 #define SMBHSTSTS_HOST_BUSY 0x01 134 135 #define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \ 136 SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \ 137 SMBHSTSTS_INTR) 138 139 /* Older devices have their ID defined in <linux/pci_ids.h> */ 140 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 141 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 142 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */ 143 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70 144 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71 145 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72 146 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 147 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 148 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 149 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 150 151 struct i801_priv { 152 struct i2c_adapter adapter; 153 unsigned long smba; 154 unsigned char original_hstcfg; 155 struct pci_dev *pci_dev; 156 unsigned int features; 157 }; 158 159 static struct pci_driver i801_driver; 160 161 #define FEATURE_SMBUS_PEC (1 << 0) 162 #define FEATURE_BLOCK_BUFFER (1 << 1) 163 #define FEATURE_BLOCK_PROC (1 << 2) 164 #define FEATURE_I2C_BLOCK_READ (1 << 3) 165 /* Not really a feature, but it's convenient to handle it as such */ 166 #define FEATURE_IDF (1 << 15) 167 168 static const char *i801_feature_names[] = { 169 "SMBus PEC", 170 "Block buffer", 171 "Block process call", 172 "I2C block read", 173 }; 174 175 static unsigned int disable_features; 176 module_param(disable_features, uint, S_IRUGO | S_IWUSR); 177 MODULE_PARM_DESC(disable_features, "Disable selected driver features"); 178 179 /* Make sure the SMBus host is ready to start transmitting. 180 Return 0 if it is, -EBUSY if it is not. */ 181 static int i801_check_pre(struct i801_priv *priv) 182 { 183 int status; 184 185 status = inb_p(SMBHSTSTS(priv)); 186 if (status & SMBHSTSTS_HOST_BUSY) { 187 dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n"); 188 return -EBUSY; 189 } 190 191 status &= STATUS_FLAGS; 192 if (status) { 193 dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n", 194 status); 195 outb_p(status, SMBHSTSTS(priv)); 196 status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS; 197 if (status) { 198 dev_err(&priv->pci_dev->dev, 199 "Failed clearing status flags (%02x)\n", 200 status); 201 return -EBUSY; 202 } 203 } 204 205 return 0; 206 } 207 208 /* Convert the status register to an error code, and clear it. */ 209 static int i801_check_post(struct i801_priv *priv, int status, int timeout) 210 { 211 int result = 0; 212 213 /* If the SMBus is still busy, we give up */ 214 if (timeout) { 215 dev_err(&priv->pci_dev->dev, "Transaction timeout\n"); 216 /* try to stop the current command */ 217 dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n"); 218 outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, 219 SMBHSTCNT(priv)); 220 usleep_range(1000, 2000); 221 outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), 222 SMBHSTCNT(priv)); 223 224 /* Check if it worked */ 225 status = inb_p(SMBHSTSTS(priv)); 226 if ((status & SMBHSTSTS_HOST_BUSY) || 227 !(status & SMBHSTSTS_FAILED)) 228 dev_err(&priv->pci_dev->dev, 229 "Failed terminating the transaction\n"); 230 outb_p(STATUS_FLAGS, SMBHSTSTS(priv)); 231 return -ETIMEDOUT; 232 } 233 234 if (status & SMBHSTSTS_FAILED) { 235 result = -EIO; 236 dev_err(&priv->pci_dev->dev, "Transaction failed\n"); 237 } 238 if (status & SMBHSTSTS_DEV_ERR) { 239 result = -ENXIO; 240 dev_dbg(&priv->pci_dev->dev, "No response\n"); 241 } 242 if (status & SMBHSTSTS_BUS_ERR) { 243 result = -EAGAIN; 244 dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n"); 245 } 246 247 if (result) { 248 /* Clear error flags */ 249 outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv)); 250 status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS; 251 if (status) { 252 dev_warn(&priv->pci_dev->dev, "Failed clearing status " 253 "flags at end of transaction (%02x)\n", 254 status); 255 } 256 } 257 258 return result; 259 } 260 261 static int i801_transaction(struct i801_priv *priv, int xact) 262 { 263 int status; 264 int result; 265 int timeout = 0; 266 267 result = i801_check_pre(priv); 268 if (result < 0) 269 return result; 270 271 /* the current contents of SMBHSTCNT can be overwritten, since PEC, 272 * INTREN, SMBSCMD are passed in xact */ 273 outb_p(xact | I801_START, SMBHSTCNT(priv)); 274 275 /* We will always wait for a fraction of a second! */ 276 do { 277 usleep_range(250, 500); 278 status = inb_p(SMBHSTSTS(priv)); 279 } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES)); 280 281 result = i801_check_post(priv, status, timeout > MAX_RETRIES); 282 if (result < 0) 283 return result; 284 285 outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv)); 286 return 0; 287 } 288 289 /* wait for INTR bit as advised by Intel */ 290 static void i801_wait_hwpec(struct i801_priv *priv) 291 { 292 int timeout = 0; 293 int status; 294 295 do { 296 usleep_range(250, 500); 297 status = inb_p(SMBHSTSTS(priv)); 298 } while ((!(status & SMBHSTSTS_INTR)) 299 && (timeout++ < MAX_RETRIES)); 300 301 if (timeout > MAX_RETRIES) 302 dev_dbg(&priv->pci_dev->dev, "PEC Timeout!\n"); 303 304 outb_p(status, SMBHSTSTS(priv)); 305 } 306 307 static int i801_block_transaction_by_block(struct i801_priv *priv, 308 union i2c_smbus_data *data, 309 char read_write, int hwpec) 310 { 311 int i, len; 312 int status; 313 314 inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */ 315 316 /* Use 32-byte buffer to process this transaction */ 317 if (read_write == I2C_SMBUS_WRITE) { 318 len = data->block[0]; 319 outb_p(len, SMBHSTDAT0(priv)); 320 for (i = 0; i < len; i++) 321 outb_p(data->block[i+1], SMBBLKDAT(priv)); 322 } 323 324 status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 | 325 I801_PEC_EN * hwpec); 326 if (status) 327 return status; 328 329 if (read_write == I2C_SMBUS_READ) { 330 len = inb_p(SMBHSTDAT0(priv)); 331 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) 332 return -EPROTO; 333 334 data->block[0] = len; 335 for (i = 0; i < len; i++) 336 data->block[i + 1] = inb_p(SMBBLKDAT(priv)); 337 } 338 return 0; 339 } 340 341 static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, 342 union i2c_smbus_data *data, 343 char read_write, int command, 344 int hwpec) 345 { 346 int i, len; 347 int smbcmd; 348 int status; 349 int result; 350 int timeout; 351 352 result = i801_check_pre(priv); 353 if (result < 0) 354 return result; 355 356 len = data->block[0]; 357 358 if (read_write == I2C_SMBUS_WRITE) { 359 outb_p(len, SMBHSTDAT0(priv)); 360 outb_p(data->block[1], SMBBLKDAT(priv)); 361 } 362 363 for (i = 1; i <= len; i++) { 364 if (i == len && read_write == I2C_SMBUS_READ) { 365 if (command == I2C_SMBUS_I2C_BLOCK_DATA) 366 smbcmd = I801_I2C_BLOCK_LAST; 367 else 368 smbcmd = I801_BLOCK_LAST; 369 } else { 370 if (command == I2C_SMBUS_I2C_BLOCK_DATA 371 && read_write == I2C_SMBUS_READ) 372 smbcmd = I801_I2C_BLOCK_DATA; 373 else 374 smbcmd = I801_BLOCK_DATA; 375 } 376 outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv)); 377 378 if (i == 1) 379 outb_p(inb(SMBHSTCNT(priv)) | I801_START, 380 SMBHSTCNT(priv)); 381 382 /* We will always wait for a fraction of a second! */ 383 timeout = 0; 384 do { 385 usleep_range(250, 500); 386 status = inb_p(SMBHSTSTS(priv)); 387 } while ((!(status & SMBHSTSTS_BYTE_DONE)) 388 && (timeout++ < MAX_RETRIES)); 389 390 result = i801_check_post(priv, status, timeout > MAX_RETRIES); 391 if (result < 0) 392 return result; 393 394 if (i == 1 && read_write == I2C_SMBUS_READ 395 && command != I2C_SMBUS_I2C_BLOCK_DATA) { 396 len = inb_p(SMBHSTDAT0(priv)); 397 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { 398 dev_err(&priv->pci_dev->dev, 399 "Illegal SMBus block read size %d\n", 400 len); 401 /* Recover */ 402 while (inb_p(SMBHSTSTS(priv)) & 403 SMBHSTSTS_HOST_BUSY) 404 outb_p(SMBHSTSTS_BYTE_DONE, 405 SMBHSTSTS(priv)); 406 outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv)); 407 return -EPROTO; 408 } 409 data->block[0] = len; 410 } 411 412 /* Retrieve/store value in SMBBLKDAT */ 413 if (read_write == I2C_SMBUS_READ) 414 data->block[i] = inb_p(SMBBLKDAT(priv)); 415 if (read_write == I2C_SMBUS_WRITE && i+1 <= len) 416 outb_p(data->block[i+1], SMBBLKDAT(priv)); 417 418 /* signals SMBBLKDAT ready */ 419 outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv)); 420 } 421 422 return 0; 423 } 424 425 static int i801_set_block_buffer_mode(struct i801_priv *priv) 426 { 427 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv)); 428 if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0) 429 return -EIO; 430 return 0; 431 } 432 433 /* Block transaction function */ 434 static int i801_block_transaction(struct i801_priv *priv, 435 union i2c_smbus_data *data, char read_write, 436 int command, int hwpec) 437 { 438 int result = 0; 439 unsigned char hostc; 440 441 if (command == I2C_SMBUS_I2C_BLOCK_DATA) { 442 if (read_write == I2C_SMBUS_WRITE) { 443 /* set I2C_EN bit in configuration register */ 444 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc); 445 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, 446 hostc | SMBHSTCFG_I2C_EN); 447 } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) { 448 dev_err(&priv->pci_dev->dev, 449 "I2C block read is unsupported!\n"); 450 return -EOPNOTSUPP; 451 } 452 } 453 454 if (read_write == I2C_SMBUS_WRITE 455 || command == I2C_SMBUS_I2C_BLOCK_DATA) { 456 if (data->block[0] < 1) 457 data->block[0] = 1; 458 if (data->block[0] > I2C_SMBUS_BLOCK_MAX) 459 data->block[0] = I2C_SMBUS_BLOCK_MAX; 460 } else { 461 data->block[0] = 32; /* max for SMBus block reads */ 462 } 463 464 /* Experience has shown that the block buffer can only be used for 465 SMBus (not I2C) block transactions, even though the datasheet 466 doesn't mention this limitation. */ 467 if ((priv->features & FEATURE_BLOCK_BUFFER) 468 && command != I2C_SMBUS_I2C_BLOCK_DATA 469 && i801_set_block_buffer_mode(priv) == 0) 470 result = i801_block_transaction_by_block(priv, data, 471 read_write, hwpec); 472 else 473 result = i801_block_transaction_byte_by_byte(priv, data, 474 read_write, 475 command, hwpec); 476 477 if (result == 0 && hwpec) 478 i801_wait_hwpec(priv); 479 480 if (command == I2C_SMBUS_I2C_BLOCK_DATA 481 && read_write == I2C_SMBUS_WRITE) { 482 /* restore saved configuration register value */ 483 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc); 484 } 485 return result; 486 } 487 488 /* Return negative errno on error. */ 489 static s32 i801_access(struct i2c_adapter *adap, u16 addr, 490 unsigned short flags, char read_write, u8 command, 491 int size, union i2c_smbus_data *data) 492 { 493 int hwpec; 494 int block = 0; 495 int ret, xact = 0; 496 struct i801_priv *priv = i2c_get_adapdata(adap); 497 498 hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) 499 && size != I2C_SMBUS_QUICK 500 && size != I2C_SMBUS_I2C_BLOCK_DATA; 501 502 switch (size) { 503 case I2C_SMBUS_QUICK: 504 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 505 SMBHSTADD(priv)); 506 xact = I801_QUICK; 507 break; 508 case I2C_SMBUS_BYTE: 509 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 510 SMBHSTADD(priv)); 511 if (read_write == I2C_SMBUS_WRITE) 512 outb_p(command, SMBHSTCMD(priv)); 513 xact = I801_BYTE; 514 break; 515 case I2C_SMBUS_BYTE_DATA: 516 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 517 SMBHSTADD(priv)); 518 outb_p(command, SMBHSTCMD(priv)); 519 if (read_write == I2C_SMBUS_WRITE) 520 outb_p(data->byte, SMBHSTDAT0(priv)); 521 xact = I801_BYTE_DATA; 522 break; 523 case I2C_SMBUS_WORD_DATA: 524 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 525 SMBHSTADD(priv)); 526 outb_p(command, SMBHSTCMD(priv)); 527 if (read_write == I2C_SMBUS_WRITE) { 528 outb_p(data->word & 0xff, SMBHSTDAT0(priv)); 529 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); 530 } 531 xact = I801_WORD_DATA; 532 break; 533 case I2C_SMBUS_BLOCK_DATA: 534 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 535 SMBHSTADD(priv)); 536 outb_p(command, SMBHSTCMD(priv)); 537 block = 1; 538 break; 539 case I2C_SMBUS_I2C_BLOCK_DATA: 540 /* NB: page 240 of ICH5 datasheet shows that the R/#W 541 * bit should be cleared here, even when reading */ 542 outb_p((addr & 0x7f) << 1, SMBHSTADD(priv)); 543 if (read_write == I2C_SMBUS_READ) { 544 /* NB: page 240 of ICH5 datasheet also shows 545 * that DATA1 is the cmd field when reading */ 546 outb_p(command, SMBHSTDAT1(priv)); 547 } else 548 outb_p(command, SMBHSTCMD(priv)); 549 block = 1; 550 break; 551 default: 552 dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n", 553 size); 554 return -EOPNOTSUPP; 555 } 556 557 if (hwpec) /* enable/disable hardware PEC */ 558 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv)); 559 else 560 outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), 561 SMBAUXCTL(priv)); 562 563 if (block) 564 ret = i801_block_transaction(priv, data, read_write, size, 565 hwpec); 566 else 567 ret = i801_transaction(priv, xact | ENABLE_INT9); 568 569 /* Some BIOSes don't like it when PEC is enabled at reboot or resume 570 time, so we forcibly disable it after every transaction. Turn off 571 E32B for the same reason. */ 572 if (hwpec || block) 573 outb_p(inb_p(SMBAUXCTL(priv)) & 574 ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); 575 576 if (block) 577 return ret; 578 if (ret) 579 return ret; 580 if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) 581 return 0; 582 583 switch (xact & 0x7f) { 584 case I801_BYTE: /* Result put in SMBHSTDAT0 */ 585 case I801_BYTE_DATA: 586 data->byte = inb_p(SMBHSTDAT0(priv)); 587 break; 588 case I801_WORD_DATA: 589 data->word = inb_p(SMBHSTDAT0(priv)) + 590 (inb_p(SMBHSTDAT1(priv)) << 8); 591 break; 592 } 593 return 0; 594 } 595 596 597 static u32 i801_func(struct i2c_adapter *adapter) 598 { 599 struct i801_priv *priv = i2c_get_adapdata(adapter); 600 601 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | 602 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | 603 I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | 604 ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | 605 ((priv->features & FEATURE_I2C_BLOCK_READ) ? 606 I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0); 607 } 608 609 static const struct i2c_algorithm smbus_algorithm = { 610 .smbus_xfer = i801_access, 611 .functionality = i801_func, 612 }; 613 614 static DEFINE_PCI_DEVICE_TABLE(i801_ids) = { 615 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) }, 616 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) }, 617 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) }, 618 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) }, 619 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) }, 620 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) }, 621 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) }, 622 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) }, 623 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) }, 624 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) }, 625 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) }, 626 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) }, 627 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EP80579_1) }, 628 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, 629 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, 630 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS) }, 631 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) }, 632 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS) }, 633 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) }, 634 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) }, 635 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) }, 636 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) }, 637 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) }, 638 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) }, 639 { 0, } 640 }; 641 642 MODULE_DEVICE_TABLE(pci, i801_ids); 643 644 #if defined CONFIG_X86 && defined CONFIG_DMI 645 static unsigned char apanel_addr; 646 647 /* Scan the system ROM for the signature "FJKEYINF" */ 648 static __init const void __iomem *bios_signature(const void __iomem *bios) 649 { 650 ssize_t offset; 651 const unsigned char signature[] = "FJKEYINF"; 652 653 for (offset = 0; offset < 0x10000; offset += 0x10) { 654 if (check_signature(bios + offset, signature, 655 sizeof(signature)-1)) 656 return bios + offset; 657 } 658 return NULL; 659 } 660 661 static void __init input_apanel_init(void) 662 { 663 void __iomem *bios; 664 const void __iomem *p; 665 666 bios = ioremap(0xF0000, 0x10000); /* Can't fail */ 667 p = bios_signature(bios); 668 if (p) { 669 /* just use the first address */ 670 apanel_addr = readb(p + 8 + 3) >> 1; 671 } 672 iounmap(bios); 673 } 674 675 struct dmi_onboard_device_info { 676 const char *name; 677 u8 type; 678 unsigned short i2c_addr; 679 const char *i2c_type; 680 }; 681 682 static struct dmi_onboard_device_info __devinitdata dmi_devices[] = { 683 { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" }, 684 { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" }, 685 { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" }, 686 }; 687 688 static void __devinit dmi_check_onboard_device(u8 type, const char *name, 689 struct i2c_adapter *adap) 690 { 691 int i; 692 struct i2c_board_info info; 693 694 for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) { 695 /* & ~0x80, ignore enabled/disabled bit */ 696 if ((type & ~0x80) != dmi_devices[i].type) 697 continue; 698 if (strcasecmp(name, dmi_devices[i].name)) 699 continue; 700 701 memset(&info, 0, sizeof(struct i2c_board_info)); 702 info.addr = dmi_devices[i].i2c_addr; 703 strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE); 704 i2c_new_device(adap, &info); 705 break; 706 } 707 } 708 709 /* We use our own function to check for onboard devices instead of 710 dmi_find_device() as some buggy BIOS's have the devices we are interested 711 in marked as disabled */ 712 static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm, 713 void *adap) 714 { 715 int i, count; 716 717 if (dm->type != 10) 718 return; 719 720 count = (dm->length - sizeof(struct dmi_header)) / 2; 721 for (i = 0; i < count; i++) { 722 const u8 *d = (char *)(dm + 1) + (i * 2); 723 const char *name = ((char *) dm) + dm->length; 724 u8 type = d[0]; 725 u8 s = d[1]; 726 727 if (!s) 728 continue; 729 s--; 730 while (s > 0 && name[0]) { 731 name += strlen(name) + 1; 732 s--; 733 } 734 if (name[0] == 0) /* Bogus string reference */ 735 continue; 736 737 dmi_check_onboard_device(type, name, adap); 738 } 739 } 740 741 /* Register optional slaves */ 742 static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) 743 { 744 /* Only register slaves on main SMBus channel */ 745 if (priv->features & FEATURE_IDF) 746 return; 747 748 if (apanel_addr) { 749 struct i2c_board_info info; 750 751 memset(&info, 0, sizeof(struct i2c_board_info)); 752 info.addr = apanel_addr; 753 strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE); 754 i2c_new_device(&priv->adapter, &info); 755 } 756 757 if (dmi_name_in_vendors("FUJITSU")) 758 dmi_walk(dmi_check_onboard_devices, &priv->adapter); 759 } 760 #else 761 static void __init input_apanel_init(void) {} 762 static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {} 763 #endif /* CONFIG_X86 && CONFIG_DMI */ 764 765 static int __devinit i801_probe(struct pci_dev *dev, 766 const struct pci_device_id *id) 767 { 768 unsigned char temp; 769 int err, i; 770 struct i801_priv *priv; 771 772 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 773 if (!priv) 774 return -ENOMEM; 775 776 i2c_set_adapdata(&priv->adapter, priv); 777 priv->adapter.owner = THIS_MODULE; 778 priv->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; 779 priv->adapter.algo = &smbus_algorithm; 780 781 priv->pci_dev = dev; 782 switch (dev->device) { 783 case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0: 784 case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1: 785 case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2: 786 priv->features |= FEATURE_IDF; 787 /* fall through */ 788 default: 789 priv->features |= FEATURE_I2C_BLOCK_READ; 790 /* fall through */ 791 case PCI_DEVICE_ID_INTEL_82801DB_3: 792 priv->features |= FEATURE_SMBUS_PEC; 793 priv->features |= FEATURE_BLOCK_BUFFER; 794 /* fall through */ 795 case PCI_DEVICE_ID_INTEL_82801CA_3: 796 case PCI_DEVICE_ID_INTEL_82801BA_2: 797 case PCI_DEVICE_ID_INTEL_82801AB_3: 798 case PCI_DEVICE_ID_INTEL_82801AA_3: 799 break; 800 } 801 802 /* Disable features on user request */ 803 for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) { 804 if (priv->features & disable_features & (1 << i)) 805 dev_notice(&dev->dev, "%s disabled by user\n", 806 i801_feature_names[i]); 807 } 808 priv->features &= ~disable_features; 809 810 err = pci_enable_device(dev); 811 if (err) { 812 dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n", 813 err); 814 goto exit; 815 } 816 817 /* Determine the address of the SMBus area */ 818 priv->smba = pci_resource_start(dev, SMBBAR); 819 if (!priv->smba) { 820 dev_err(&dev->dev, "SMBus base address uninitialized, " 821 "upgrade BIOS\n"); 822 err = -ENODEV; 823 goto exit; 824 } 825 826 err = acpi_check_resource_conflict(&dev->resource[SMBBAR]); 827 if (err) { 828 err = -ENODEV; 829 goto exit; 830 } 831 832 err = pci_request_region(dev, SMBBAR, i801_driver.name); 833 if (err) { 834 dev_err(&dev->dev, "Failed to request SMBus region " 835 "0x%lx-0x%Lx\n", priv->smba, 836 (unsigned long long)pci_resource_end(dev, SMBBAR)); 837 goto exit; 838 } 839 840 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp); 841 priv->original_hstcfg = temp; 842 temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */ 843 if (!(temp & SMBHSTCFG_HST_EN)) { 844 dev_info(&dev->dev, "Enabling SMBus device\n"); 845 temp |= SMBHSTCFG_HST_EN; 846 } 847 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp); 848 849 if (temp & SMBHSTCFG_SMB_SMI_EN) 850 dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n"); 851 else 852 dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n"); 853 854 /* Clear special mode bits */ 855 if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) 856 outb_p(inb_p(SMBAUXCTL(priv)) & 857 ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); 858 859 /* set up the sysfs linkage to our parent device */ 860 priv->adapter.dev.parent = &dev->dev; 861 862 /* Retry up to 3 times on lost arbitration */ 863 priv->adapter.retries = 3; 864 865 snprintf(priv->adapter.name, sizeof(priv->adapter.name), 866 "SMBus I801 adapter at %04lx", priv->smba); 867 err = i2c_add_adapter(&priv->adapter); 868 if (err) { 869 dev_err(&dev->dev, "Failed to add SMBus adapter\n"); 870 goto exit_release; 871 } 872 873 i801_probe_optional_slaves(priv); 874 875 pci_set_drvdata(dev, priv); 876 return 0; 877 878 exit_release: 879 pci_release_region(dev, SMBBAR); 880 exit: 881 kfree(priv); 882 return err; 883 } 884 885 static void __devexit i801_remove(struct pci_dev *dev) 886 { 887 struct i801_priv *priv = pci_get_drvdata(dev); 888 889 i2c_del_adapter(&priv->adapter); 890 pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); 891 pci_release_region(dev, SMBBAR); 892 pci_set_drvdata(dev, NULL); 893 kfree(priv); 894 /* 895 * do not call pci_disable_device(dev) since it can cause hard hangs on 896 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010) 897 */ 898 } 899 900 #ifdef CONFIG_PM 901 static int i801_suspend(struct pci_dev *dev, pm_message_t mesg) 902 { 903 struct i801_priv *priv = pci_get_drvdata(dev); 904 905 pci_save_state(dev); 906 pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); 907 pci_set_power_state(dev, pci_choose_state(dev, mesg)); 908 return 0; 909 } 910 911 static int i801_resume(struct pci_dev *dev) 912 { 913 pci_set_power_state(dev, PCI_D0); 914 pci_restore_state(dev); 915 return pci_enable_device(dev); 916 } 917 #else 918 #define i801_suspend NULL 919 #define i801_resume NULL 920 #endif 921 922 static struct pci_driver i801_driver = { 923 .name = "i801_smbus", 924 .id_table = i801_ids, 925 .probe = i801_probe, 926 .remove = __devexit_p(i801_remove), 927 .suspend = i801_suspend, 928 .resume = i801_resume, 929 }; 930 931 static int __init i2c_i801_init(void) 932 { 933 if (dmi_name_in_vendors("FUJITSU")) 934 input_apanel_init(); 935 return pci_register_driver(&i801_driver); 936 } 937 938 static void __exit i2c_i801_exit(void) 939 { 940 pci_unregister_driver(&i801_driver); 941 } 942 943 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, " 944 "Jean Delvare <khali@linux-fr.org>"); 945 MODULE_DESCRIPTION("I801 SMBus driver"); 946 MODULE_LICENSE("GPL"); 947 948 module_init(i2c_i801_init); 949 module_exit(i2c_i801_exit); 950