1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, 4 Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker 5 <mdsxyz123@yahoo.com> 6 Copyright (C) 2007 - 2014 Jean Delvare <jdelvare@suse.de> 7 Copyright (C) 2010 Intel Corporation, 8 David Woodhouse <dwmw2@infradead.org> 9 10 */ 11 12 /* 13 * Supports the following Intel I/O Controller Hubs (ICH): 14 * 15 * I/O Block I2C 16 * region SMBus Block proc. block 17 * Chip name PCI ID size PEC buffer call read 18 * --------------------------------------------------------------------------- 19 * 82801AA (ICH) 0x2413 16 no no no no 20 * 82801AB (ICH0) 0x2423 16 no no no no 21 * 82801BA (ICH2) 0x2443 16 no no no no 22 * 82801CA (ICH3) 0x2483 32 soft no no no 23 * 82801DB (ICH4) 0x24c3 32 hard yes no no 24 * 82801E (ICH5) 0x24d3 32 hard yes yes yes 25 * 6300ESB 0x25a4 32 hard yes yes yes 26 * 82801F (ICH6) 0x266a 32 hard yes yes yes 27 * 6310ESB/6320ESB 0x269b 32 hard yes yes yes 28 * 82801G (ICH7) 0x27da 32 hard yes yes yes 29 * 82801H (ICH8) 0x283e 32 hard yes yes yes 30 * 82801I (ICH9) 0x2930 32 hard yes yes yes 31 * EP80579 (Tolapai) 0x5032 32 hard yes yes yes 32 * ICH10 0x3a30 32 hard yes yes yes 33 * ICH10 0x3a60 32 hard yes yes yes 34 * 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes 35 * 6 Series (PCH) 0x1c22 32 hard yes yes yes 36 * Patsburg (PCH) 0x1d22 32 hard yes yes yes 37 * Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes 38 * Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes 39 * Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes 40 * DH89xxCC (PCH) 0x2330 32 hard yes yes yes 41 * Panther Point (PCH) 0x1e22 32 hard yes yes yes 42 * Lynx Point (PCH) 0x8c22 32 hard yes yes yes 43 * Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes 44 * Avoton (SOC) 0x1f3c 32 hard yes yes yes 45 * Wellsburg (PCH) 0x8d22 32 hard yes yes yes 46 * Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes 47 * Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes 48 * Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes 49 * Coleto Creek (PCH) 0x23b0 32 hard yes yes yes 50 * Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes 51 * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes 52 * BayTrail (SOC) 0x0f12 32 hard yes yes yes 53 * Braswell (SOC) 0x2292 32 hard yes yes yes 54 * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes 55 * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes 56 * DNV (SOC) 0x19df 32 hard yes yes yes 57 * Emmitsburg (PCH) 0x1bc9 32 hard yes yes yes 58 * Broxton (SOC) 0x5ad4 32 hard yes yes yes 59 * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes 60 * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes 61 * Kaby Lake PCH-H (PCH) 0xa2a3 32 hard yes yes yes 62 * Gemini Lake (SOC) 0x31d4 32 hard yes yes yes 63 * Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes 64 * Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes 65 * Cedar Fork (PCH) 0x18df 32 hard yes yes yes 66 * Ice Lake-LP (PCH) 0x34a3 32 hard yes yes yes 67 * Ice Lake-N (PCH) 0x38a3 32 hard yes yes yes 68 * Comet Lake (PCH) 0x02a3 32 hard yes yes yes 69 * Comet Lake-H (PCH) 0x06a3 32 hard yes yes yes 70 * Elkhart Lake (PCH) 0x4b23 32 hard yes yes yes 71 * Tiger Lake-LP (PCH) 0xa0a3 32 hard yes yes yes 72 * Tiger Lake-H (PCH) 0x43a3 32 hard yes yes yes 73 * Jasper Lake (SOC) 0x4da3 32 hard yes yes yes 74 * Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes 75 * Alder Lake-S (PCH) 0x7aa3 32 hard yes yes yes 76 * Alder Lake-P (PCH) 0x51a3 32 hard yes yes yes 77 * Alder Lake-M (PCH) 0x54a3 32 hard yes yes yes 78 * Raptor Lake-S (PCH) 0x7a23 32 hard yes yes yes 79 * Meteor Lake-P (SOC) 0x7e22 32 hard yes yes yes 80 * Meteor Lake SoC-S (SOC) 0xae22 32 hard yes yes yes 81 * Meteor Lake PCH-S (PCH) 0x7f23 32 hard yes yes yes 82 * 83 * Features supported by this driver: 84 * Software PEC no 85 * Hardware PEC yes 86 * Block buffer yes 87 * Block process call transaction yes 88 * I2C block read transaction yes (doesn't use the block buffer) 89 * Slave mode no 90 * SMBus Host Notify yes 91 * Interrupt processing yes 92 * 93 * See the file Documentation/i2c/busses/i2c-i801.rst for details. 94 */ 95 96 #define DRV_NAME "i801_smbus" 97 98 #include <linux/interrupt.h> 99 #include <linux/module.h> 100 #include <linux/pci.h> 101 #include <linux/kernel.h> 102 #include <linux/stddef.h> 103 #include <linux/delay.h> 104 #include <linux/ioport.h> 105 #include <linux/init.h> 106 #include <linux/i2c.h> 107 #include <linux/i2c-smbus.h> 108 #include <linux/acpi.h> 109 #include <linux/io.h> 110 #include <linux/dmi.h> 111 #include <linux/slab.h> 112 #include <linux/string.h> 113 #include <linux/completion.h> 114 #include <linux/err.h> 115 #include <linux/platform_device.h> 116 #include <linux/platform_data/itco_wdt.h> 117 #include <linux/platform_data/x86/p2sb.h> 118 #include <linux/pm_runtime.h> 119 #include <linux/mutex.h> 120 121 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI 122 #include <linux/gpio/machine.h> 123 #include <linux/platform_data/i2c-mux-gpio.h> 124 #endif 125 126 /* I801 SMBus address offsets */ 127 #define SMBHSTSTS(p) (0 + (p)->smba) 128 #define SMBHSTCNT(p) (2 + (p)->smba) 129 #define SMBHSTCMD(p) (3 + (p)->smba) 130 #define SMBHSTADD(p) (4 + (p)->smba) 131 #define SMBHSTDAT0(p) (5 + (p)->smba) 132 #define SMBHSTDAT1(p) (6 + (p)->smba) 133 #define SMBBLKDAT(p) (7 + (p)->smba) 134 #define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */ 135 #define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */ 136 #define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */ 137 #define SMBSLVSTS(p) (16 + (p)->smba) /* ICH3 and later */ 138 #define SMBSLVCMD(p) (17 + (p)->smba) /* ICH3 and later */ 139 #define SMBNTFDADD(p) (20 + (p)->smba) /* ICH3 and later */ 140 141 /* PCI Address Constants */ 142 #define SMBBAR 4 143 #define SMBHSTCFG 0x040 144 #define TCOBASE 0x050 145 #define TCOCTL 0x054 146 147 #define SBREG_SMBCTRL 0xc6000c 148 #define SBREG_SMBCTRL_DNV 0xcf000c 149 150 /* Host configuration bits for SMBHSTCFG */ 151 #define SMBHSTCFG_HST_EN BIT(0) 152 #define SMBHSTCFG_SMB_SMI_EN BIT(1) 153 #define SMBHSTCFG_I2C_EN BIT(2) 154 #define SMBHSTCFG_SPD_WD BIT(4) 155 156 /* TCO configuration bits for TCOCTL */ 157 #define TCOCTL_EN BIT(8) 158 159 /* Auxiliary status register bits, ICH4+ only */ 160 #define SMBAUXSTS_CRCE BIT(0) 161 #define SMBAUXSTS_STCO BIT(1) 162 163 /* Auxiliary control register bits, ICH4+ only */ 164 #define SMBAUXCTL_CRC BIT(0) 165 #define SMBAUXCTL_E32B BIT(1) 166 167 /* I801 command constants */ 168 #define I801_QUICK 0x00 169 #define I801_BYTE 0x04 170 #define I801_BYTE_DATA 0x08 171 #define I801_WORD_DATA 0x0C 172 #define I801_PROC_CALL 0x10 173 #define I801_BLOCK_DATA 0x14 174 #define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */ 175 #define I801_BLOCK_PROC_CALL 0x1C 176 177 /* I801 Host Control register bits */ 178 #define SMBHSTCNT_INTREN BIT(0) 179 #define SMBHSTCNT_KILL BIT(1) 180 #define SMBHSTCNT_LAST_BYTE BIT(5) 181 #define SMBHSTCNT_START BIT(6) 182 #define SMBHSTCNT_PEC_EN BIT(7) /* ICH3 and later */ 183 184 /* I801 Hosts Status register bits */ 185 #define SMBHSTSTS_BYTE_DONE BIT(7) 186 #define SMBHSTSTS_INUSE_STS BIT(6) 187 #define SMBHSTSTS_SMBALERT_STS BIT(5) 188 #define SMBHSTSTS_FAILED BIT(4) 189 #define SMBHSTSTS_BUS_ERR BIT(3) 190 #define SMBHSTSTS_DEV_ERR BIT(2) 191 #define SMBHSTSTS_INTR BIT(1) 192 #define SMBHSTSTS_HOST_BUSY BIT(0) 193 194 /* Host Notify Status register bits */ 195 #define SMBSLVSTS_HST_NTFY_STS BIT(0) 196 197 /* Host Notify Command register bits */ 198 #define SMBSLVCMD_SMBALERT_DISABLE BIT(2) 199 #define SMBSLVCMD_HST_NTFY_INTREN BIT(0) 200 201 #define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \ 202 SMBHSTSTS_DEV_ERR) 203 204 #define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \ 205 STATUS_ERROR_FLAGS) 206 207 /* Older devices have their ID defined in <linux/pci_ids.h> */ 208 #define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS 0x02a3 209 #define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS 0x06a3 210 #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12 211 #define PCI_DEVICE_ID_INTEL_CDF_SMBUS 0x18df 212 #define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df 213 #define PCI_DEVICE_ID_INTEL_EBG_SMBUS 0x1bc9 214 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 215 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 216 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */ 217 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70 218 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71 219 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72 220 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 221 #define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c 222 #define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292 223 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 224 #define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0 225 #define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4 226 #define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3 227 #define PCI_DEVICE_ID_INTEL_ICELAKE_N_SMBUS 0x38a3 228 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 229 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3 230 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23 231 #define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3 232 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS 0x51a3 233 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS 0x54a3 234 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4 235 #define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS 0x7a23 236 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3 237 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_P_SMBUS 0x7e22 238 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_PCH_S_SMBUS 0x7f23 239 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 240 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2 241 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22 242 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d 243 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e 244 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f 245 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 246 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2 247 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23 248 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS 0x9da3 249 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS 0xa0a3 250 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 251 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3 252 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223 253 #define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3 254 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323 255 #define PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS 0xa3a3 256 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_SOC_S_SMBUS 0xae22 257 258 struct i801_mux_config { 259 char *gpio_chip; 260 unsigned values[3]; 261 int n_values; 262 unsigned classes[3]; 263 unsigned gpios[2]; /* Relative to gpio_chip->base */ 264 int n_gpios; 265 }; 266 267 struct i801_priv { 268 struct i2c_adapter adapter; 269 unsigned long smba; 270 unsigned char original_hstcfg; 271 unsigned char original_hstcnt; 272 unsigned char original_slvcmd; 273 struct pci_dev *pci_dev; 274 unsigned int features; 275 276 /* isr processing */ 277 struct completion done; 278 u8 status; 279 280 /* Command state used by isr for byte-by-byte block transactions */ 281 u8 cmd; 282 bool is_read; 283 int count; 284 int len; 285 u8 *data; 286 287 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI 288 const struct i801_mux_config *mux_drvdata; 289 struct platform_device *mux_pdev; 290 struct gpiod_lookup_table *lookup; 291 #endif 292 struct platform_device *tco_pdev; 293 294 /* 295 * If set to true the host controller registers are reserved for 296 * ACPI AML use. Protected by acpi_lock. 297 */ 298 bool acpi_reserved; 299 struct mutex acpi_lock; 300 }; 301 302 #define FEATURE_SMBUS_PEC BIT(0) 303 #define FEATURE_BLOCK_BUFFER BIT(1) 304 #define FEATURE_BLOCK_PROC BIT(2) 305 #define FEATURE_I2C_BLOCK_READ BIT(3) 306 #define FEATURE_IRQ BIT(4) 307 #define FEATURE_HOST_NOTIFY BIT(5) 308 /* Not really a feature, but it's convenient to handle it as such */ 309 #define FEATURE_IDF BIT(15) 310 #define FEATURE_TCO_SPT BIT(16) 311 #define FEATURE_TCO_CNL BIT(17) 312 313 static const char *i801_feature_names[] = { 314 "SMBus PEC", 315 "Block buffer", 316 "Block process call", 317 "I2C block read", 318 "Interrupt", 319 "SMBus Host Notify", 320 }; 321 322 static unsigned int disable_features; 323 module_param(disable_features, uint, S_IRUGO | S_IWUSR); 324 MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n" 325 "\t\t 0x01 disable SMBus PEC\n" 326 "\t\t 0x02 disable the block buffer\n" 327 "\t\t 0x08 disable the I2C block read functionality\n" 328 "\t\t 0x10 don't use interrupts\n" 329 "\t\t 0x20 disable SMBus Host Notify "); 330 331 /* Make sure the SMBus host is ready to start transmitting. 332 Return 0 if it is, -EBUSY if it is not. */ 333 static int i801_check_pre(struct i801_priv *priv) 334 { 335 int status; 336 337 status = inb_p(SMBHSTSTS(priv)); 338 if (status & SMBHSTSTS_HOST_BUSY) { 339 pci_err(priv->pci_dev, "SMBus is busy, can't use it!\n"); 340 return -EBUSY; 341 } 342 343 status &= STATUS_FLAGS; 344 if (status) { 345 pci_dbg(priv->pci_dev, "Clearing status flags (%02x)\n", status); 346 outb_p(status, SMBHSTSTS(priv)); 347 } 348 349 /* 350 * Clear CRC status if needed. 351 * During normal operation, i801_check_post() takes care 352 * of it after every operation. We do it here only in case 353 * the hardware was already in this state when the driver 354 * started. 355 */ 356 if (priv->features & FEATURE_SMBUS_PEC) { 357 status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE; 358 if (status) { 359 pci_dbg(priv->pci_dev, "Clearing aux status flags (%02x)\n", status); 360 outb_p(status, SMBAUXSTS(priv)); 361 } 362 } 363 364 return 0; 365 } 366 367 static int i801_check_post(struct i801_priv *priv, int status) 368 { 369 int result = 0; 370 371 /* 372 * If the SMBus is still busy, we give up 373 */ 374 if (unlikely(status < 0)) { 375 dev_err(&priv->pci_dev->dev, "Transaction timeout\n"); 376 /* try to stop the current command */ 377 dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n"); 378 outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv)); 379 usleep_range(1000, 2000); 380 outb_p(0, SMBHSTCNT(priv)); 381 382 /* Check if it worked */ 383 status = inb_p(SMBHSTSTS(priv)); 384 if ((status & SMBHSTSTS_HOST_BUSY) || 385 !(status & SMBHSTSTS_FAILED)) 386 dev_err(&priv->pci_dev->dev, 387 "Failed terminating the transaction\n"); 388 return -ETIMEDOUT; 389 } 390 391 if (status & SMBHSTSTS_FAILED) { 392 result = -EIO; 393 dev_err(&priv->pci_dev->dev, "Transaction failed\n"); 394 } 395 if (status & SMBHSTSTS_DEV_ERR) { 396 /* 397 * This may be a PEC error, check and clear it. 398 * 399 * AUXSTS is handled differently from HSTSTS. 400 * For HSTSTS, i801_isr() or i801_wait_intr() 401 * has already cleared the error bits in hardware, 402 * and we are passed a copy of the original value 403 * in "status". 404 * For AUXSTS, the hardware register is left 405 * for us to handle here. 406 * This is asymmetric, slightly iffy, but safe, 407 * since all this code is serialized and the CRCE 408 * bit is harmless as long as it's cleared before 409 * the next operation. 410 */ 411 if ((priv->features & FEATURE_SMBUS_PEC) && 412 (inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE)) { 413 outb_p(SMBAUXSTS_CRCE, SMBAUXSTS(priv)); 414 result = -EBADMSG; 415 dev_dbg(&priv->pci_dev->dev, "PEC error\n"); 416 } else { 417 result = -ENXIO; 418 dev_dbg(&priv->pci_dev->dev, "No response\n"); 419 } 420 } 421 if (status & SMBHSTSTS_BUS_ERR) { 422 result = -EAGAIN; 423 dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n"); 424 } 425 426 return result; 427 } 428 429 /* Wait for BUSY being cleared and either INTR or an error flag being set */ 430 static int i801_wait_intr(struct i801_priv *priv) 431 { 432 unsigned long timeout = jiffies + priv->adapter.timeout; 433 int status, busy; 434 435 do { 436 usleep_range(250, 500); 437 status = inb_p(SMBHSTSTS(priv)); 438 busy = status & SMBHSTSTS_HOST_BUSY; 439 status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR; 440 if (!busy && status) 441 return status & STATUS_ERROR_FLAGS; 442 } while (time_is_after_eq_jiffies(timeout)); 443 444 return -ETIMEDOUT; 445 } 446 447 /* Wait for either BYTE_DONE or an error flag being set */ 448 static int i801_wait_byte_done(struct i801_priv *priv) 449 { 450 unsigned long timeout = jiffies + priv->adapter.timeout; 451 int status; 452 453 do { 454 usleep_range(250, 500); 455 status = inb_p(SMBHSTSTS(priv)); 456 if (status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) 457 return status & STATUS_ERROR_FLAGS; 458 } while (time_is_after_eq_jiffies(timeout)); 459 460 return -ETIMEDOUT; 461 } 462 463 static int i801_transaction(struct i801_priv *priv, int xact) 464 { 465 unsigned long result; 466 const struct i2c_adapter *adap = &priv->adapter; 467 468 if (priv->features & FEATURE_IRQ) { 469 reinit_completion(&priv->done); 470 outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START, 471 SMBHSTCNT(priv)); 472 result = wait_for_completion_timeout(&priv->done, adap->timeout); 473 return result ? priv->status : -ETIMEDOUT; 474 } 475 476 outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv)); 477 478 return i801_wait_intr(priv); 479 } 480 481 static int i801_block_transaction_by_block(struct i801_priv *priv, 482 union i2c_smbus_data *data, 483 char read_write, int command) 484 { 485 int i, len, status, xact; 486 487 switch (command) { 488 case I2C_SMBUS_BLOCK_PROC_CALL: 489 xact = I801_BLOCK_PROC_CALL; 490 break; 491 case I2C_SMBUS_BLOCK_DATA: 492 xact = I801_BLOCK_DATA; 493 break; 494 default: 495 return -EOPNOTSUPP; 496 } 497 498 /* Set block buffer mode */ 499 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv)); 500 501 inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */ 502 503 if (read_write == I2C_SMBUS_WRITE) { 504 len = data->block[0]; 505 outb_p(len, SMBHSTDAT0(priv)); 506 for (i = 0; i < len; i++) 507 outb_p(data->block[i+1], SMBBLKDAT(priv)); 508 } 509 510 status = i801_transaction(priv, xact); 511 if (status) 512 goto out; 513 514 if (read_write == I2C_SMBUS_READ || 515 command == I2C_SMBUS_BLOCK_PROC_CALL) { 516 len = inb_p(SMBHSTDAT0(priv)); 517 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { 518 status = -EPROTO; 519 goto out; 520 } 521 522 data->block[0] = len; 523 for (i = 0; i < len; i++) 524 data->block[i + 1] = inb_p(SMBBLKDAT(priv)); 525 } 526 out: 527 outb_p(inb_p(SMBAUXCTL(priv)) & ~SMBAUXCTL_E32B, SMBAUXCTL(priv)); 528 return status; 529 } 530 531 static void i801_isr_byte_done(struct i801_priv *priv) 532 { 533 if (priv->is_read) { 534 /* For SMBus block reads, length is received with first byte */ 535 if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) && 536 (priv->count == 0)) { 537 priv->len = inb_p(SMBHSTDAT0(priv)); 538 if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) { 539 dev_err(&priv->pci_dev->dev, 540 "Illegal SMBus block read size %d\n", 541 priv->len); 542 /* FIXME: Recover */ 543 priv->len = I2C_SMBUS_BLOCK_MAX; 544 } 545 priv->data[-1] = priv->len; 546 } 547 548 /* Read next byte */ 549 if (priv->count < priv->len) 550 priv->data[priv->count++] = inb(SMBBLKDAT(priv)); 551 else 552 dev_dbg(&priv->pci_dev->dev, 553 "Discarding extra byte on block read\n"); 554 555 /* Set LAST_BYTE for last byte of read transaction */ 556 if (priv->count == priv->len - 1) 557 outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE, 558 SMBHSTCNT(priv)); 559 } else if (priv->count < priv->len - 1) { 560 /* Write next byte, except for IRQ after last byte */ 561 outb_p(priv->data[++priv->count], SMBBLKDAT(priv)); 562 } 563 } 564 565 static irqreturn_t i801_host_notify_isr(struct i801_priv *priv) 566 { 567 unsigned short addr; 568 569 addr = inb_p(SMBNTFDADD(priv)) >> 1; 570 571 /* 572 * With the tested platforms, reading SMBNTFDDAT (22 + (p)->smba) 573 * always returns 0. Our current implementation doesn't provide 574 * data, so we just ignore it. 575 */ 576 i2c_handle_smbus_host_notify(&priv->adapter, addr); 577 578 /* clear Host Notify bit and return */ 579 outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv)); 580 return IRQ_HANDLED; 581 } 582 583 /* 584 * There are three kinds of interrupts: 585 * 586 * 1) i801 signals transaction completion with one of these interrupts: 587 * INTR - Success 588 * DEV_ERR - Invalid command, NAK or communication timeout 589 * BUS_ERR - SMI# transaction collision 590 * FAILED - transaction was canceled due to a KILL request 591 * When any of these occur, update ->status and signal completion. 592 * 593 * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt 594 * occurs for each byte of a byte-by-byte to prepare the next byte. 595 * 596 * 3) Host Notify interrupts 597 */ 598 static irqreturn_t i801_isr(int irq, void *dev_id) 599 { 600 struct i801_priv *priv = dev_id; 601 u16 pcists; 602 u8 status; 603 604 /* Confirm this is our interrupt */ 605 pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists); 606 if (!(pcists & PCI_STATUS_INTERRUPT)) 607 return IRQ_NONE; 608 609 if (priv->features & FEATURE_HOST_NOTIFY) { 610 status = inb_p(SMBSLVSTS(priv)); 611 if (status & SMBSLVSTS_HST_NTFY_STS) 612 return i801_host_notify_isr(priv); 613 } 614 615 status = inb_p(SMBHSTSTS(priv)); 616 if ((status & (SMBHSTSTS_BYTE_DONE | STATUS_ERROR_FLAGS)) == SMBHSTSTS_BYTE_DONE) 617 i801_isr_byte_done(priv); 618 619 /* 620 * Clear IRQ sources: SMB_ALERT status is set after signal assertion 621 * independently of the interrupt generation being blocked or not 622 * so clear it always when the status is set. 623 */ 624 status &= STATUS_FLAGS | SMBHSTSTS_SMBALERT_STS; 625 outb_p(status, SMBHSTSTS(priv)); 626 627 status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR; 628 if (status) { 629 priv->status = status & STATUS_ERROR_FLAGS; 630 complete(&priv->done); 631 } 632 633 return IRQ_HANDLED; 634 } 635 636 /* 637 * For "byte-by-byte" block transactions: 638 * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1 639 * I2C read uses cmd=I801_I2C_BLOCK_DATA 640 */ 641 static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, 642 union i2c_smbus_data *data, 643 char read_write, int command) 644 { 645 int i, len; 646 int smbcmd; 647 int status; 648 unsigned long result; 649 const struct i2c_adapter *adap = &priv->adapter; 650 651 if (command == I2C_SMBUS_BLOCK_PROC_CALL) 652 return -EOPNOTSUPP; 653 654 len = data->block[0]; 655 656 if (read_write == I2C_SMBUS_WRITE) { 657 outb_p(len, SMBHSTDAT0(priv)); 658 outb_p(data->block[1], SMBBLKDAT(priv)); 659 } 660 661 if (command == I2C_SMBUS_I2C_BLOCK_DATA && 662 read_write == I2C_SMBUS_READ) 663 smbcmd = I801_I2C_BLOCK_DATA; 664 else 665 smbcmd = I801_BLOCK_DATA; 666 667 if (priv->features & FEATURE_IRQ) { 668 priv->is_read = (read_write == I2C_SMBUS_READ); 669 if (len == 1 && priv->is_read) 670 smbcmd |= SMBHSTCNT_LAST_BYTE; 671 priv->cmd = smbcmd | SMBHSTCNT_INTREN; 672 priv->len = len; 673 priv->count = 0; 674 priv->data = &data->block[1]; 675 676 reinit_completion(&priv->done); 677 outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv)); 678 result = wait_for_completion_timeout(&priv->done, adap->timeout); 679 return result ? priv->status : -ETIMEDOUT; 680 } 681 682 for (i = 1; i <= len; i++) { 683 if (i == len && read_write == I2C_SMBUS_READ) 684 smbcmd |= SMBHSTCNT_LAST_BYTE; 685 outb_p(smbcmd, SMBHSTCNT(priv)); 686 687 if (i == 1) 688 outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START, 689 SMBHSTCNT(priv)); 690 691 status = i801_wait_byte_done(priv); 692 if (status) 693 return status; 694 695 if (i == 1 && read_write == I2C_SMBUS_READ 696 && command != I2C_SMBUS_I2C_BLOCK_DATA) { 697 len = inb_p(SMBHSTDAT0(priv)); 698 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { 699 dev_err(&priv->pci_dev->dev, 700 "Illegal SMBus block read size %d\n", 701 len); 702 /* Recover */ 703 while (inb_p(SMBHSTSTS(priv)) & 704 SMBHSTSTS_HOST_BUSY) 705 outb_p(SMBHSTSTS_BYTE_DONE, 706 SMBHSTSTS(priv)); 707 outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv)); 708 return -EPROTO; 709 } 710 data->block[0] = len; 711 } 712 713 /* Retrieve/store value in SMBBLKDAT */ 714 if (read_write == I2C_SMBUS_READ) 715 data->block[i] = inb_p(SMBBLKDAT(priv)); 716 if (read_write == I2C_SMBUS_WRITE && i+1 <= len) 717 outb_p(data->block[i+1], SMBBLKDAT(priv)); 718 719 /* signals SMBBLKDAT ready */ 720 outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); 721 } 722 723 return i801_wait_intr(priv); 724 } 725 726 static void i801_set_hstadd(struct i801_priv *priv, u8 addr, char read_write) 727 { 728 outb_p((addr << 1) | (read_write & 0x01), SMBHSTADD(priv)); 729 } 730 731 /* Single value transaction function */ 732 static int i801_simple_transaction(struct i801_priv *priv, union i2c_smbus_data *data, 733 u8 addr, u8 hstcmd, char read_write, int command) 734 { 735 int xact, ret; 736 737 switch (command) { 738 case I2C_SMBUS_QUICK: 739 i801_set_hstadd(priv, addr, read_write); 740 xact = I801_QUICK; 741 break; 742 case I2C_SMBUS_BYTE: 743 i801_set_hstadd(priv, addr, read_write); 744 if (read_write == I2C_SMBUS_WRITE) 745 outb_p(hstcmd, SMBHSTCMD(priv)); 746 xact = I801_BYTE; 747 break; 748 case I2C_SMBUS_BYTE_DATA: 749 i801_set_hstadd(priv, addr, read_write); 750 if (read_write == I2C_SMBUS_WRITE) 751 outb_p(data->byte, SMBHSTDAT0(priv)); 752 outb_p(hstcmd, SMBHSTCMD(priv)); 753 xact = I801_BYTE_DATA; 754 break; 755 case I2C_SMBUS_WORD_DATA: 756 i801_set_hstadd(priv, addr, read_write); 757 if (read_write == I2C_SMBUS_WRITE) { 758 outb_p(data->word & 0xff, SMBHSTDAT0(priv)); 759 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); 760 } 761 outb_p(hstcmd, SMBHSTCMD(priv)); 762 xact = I801_WORD_DATA; 763 break; 764 case I2C_SMBUS_PROC_CALL: 765 i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE); 766 outb_p(data->word & 0xff, SMBHSTDAT0(priv)); 767 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); 768 outb_p(hstcmd, SMBHSTCMD(priv)); 769 read_write = I2C_SMBUS_READ; 770 xact = I801_PROC_CALL; 771 break; 772 default: 773 pci_err(priv->pci_dev, "Unsupported transaction %d\n", command); 774 return -EOPNOTSUPP; 775 } 776 777 ret = i801_transaction(priv, xact); 778 if (ret || read_write == I2C_SMBUS_WRITE) 779 return ret; 780 781 switch (command) { 782 case I2C_SMBUS_BYTE: 783 case I2C_SMBUS_BYTE_DATA: 784 data->byte = inb_p(SMBHSTDAT0(priv)); 785 break; 786 case I2C_SMBUS_WORD_DATA: 787 case I2C_SMBUS_PROC_CALL: 788 data->word = inb_p(SMBHSTDAT0(priv)) + 789 (inb_p(SMBHSTDAT1(priv)) << 8); 790 break; 791 } 792 793 return 0; 794 } 795 796 /* Block transaction function */ 797 static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data, 798 u8 addr, u8 hstcmd, char read_write, int command) 799 { 800 int result = 0; 801 unsigned char hostc; 802 803 if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA) 804 data->block[0] = I2C_SMBUS_BLOCK_MAX; 805 else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX) 806 return -EPROTO; 807 808 switch (command) { 809 case I2C_SMBUS_BLOCK_DATA: 810 i801_set_hstadd(priv, addr, read_write); 811 outb_p(hstcmd, SMBHSTCMD(priv)); 812 break; 813 case I2C_SMBUS_I2C_BLOCK_DATA: 814 /* 815 * NB: page 240 of ICH5 datasheet shows that the R/#W 816 * bit should be cleared here, even when reading. 817 * However if SPD Write Disable is set (Lynx Point and later), 818 * the read will fail if we don't set the R/#W bit. 819 */ 820 i801_set_hstadd(priv, addr, 821 priv->original_hstcfg & SMBHSTCFG_SPD_WD ? 822 read_write : I2C_SMBUS_WRITE); 823 if (read_write == I2C_SMBUS_READ) { 824 /* NB: page 240 of ICH5 datasheet also shows 825 * that DATA1 is the cmd field when reading 826 */ 827 outb_p(hstcmd, SMBHSTDAT1(priv)); 828 } else 829 outb_p(hstcmd, SMBHSTCMD(priv)); 830 831 if (read_write == I2C_SMBUS_WRITE) { 832 /* set I2C_EN bit in configuration register */ 833 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc); 834 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, 835 hostc | SMBHSTCFG_I2C_EN); 836 } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) { 837 dev_err(&priv->pci_dev->dev, 838 "I2C block read is unsupported!\n"); 839 return -EOPNOTSUPP; 840 } 841 break; 842 case I2C_SMBUS_BLOCK_PROC_CALL: 843 /* Needs to be flagged as write transaction */ 844 i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE); 845 outb_p(hstcmd, SMBHSTCMD(priv)); 846 break; 847 } 848 849 /* Experience has shown that the block buffer can only be used for 850 SMBus (not I2C) block transactions, even though the datasheet 851 doesn't mention this limitation. */ 852 if ((priv->features & FEATURE_BLOCK_BUFFER) && 853 command != I2C_SMBUS_I2C_BLOCK_DATA) 854 result = i801_block_transaction_by_block(priv, data, 855 read_write, 856 command); 857 else 858 result = i801_block_transaction_byte_by_byte(priv, data, 859 read_write, 860 command); 861 862 if (command == I2C_SMBUS_I2C_BLOCK_DATA 863 && read_write == I2C_SMBUS_WRITE) { 864 /* restore saved configuration register value */ 865 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc); 866 } 867 return result; 868 } 869 870 /* Return negative errno on error. */ 871 static s32 i801_access(struct i2c_adapter *adap, u16 addr, 872 unsigned short flags, char read_write, u8 command, 873 int size, union i2c_smbus_data *data) 874 { 875 int hwpec, ret; 876 struct i801_priv *priv = i2c_get_adapdata(adap); 877 878 mutex_lock(&priv->acpi_lock); 879 if (priv->acpi_reserved) { 880 mutex_unlock(&priv->acpi_lock); 881 return -EBUSY; 882 } 883 884 pm_runtime_get_sync(&priv->pci_dev->dev); 885 886 ret = i801_check_pre(priv); 887 if (ret) 888 goto out; 889 890 hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) 891 && size != I2C_SMBUS_QUICK 892 && size != I2C_SMBUS_I2C_BLOCK_DATA; 893 894 if (hwpec) /* enable/disable hardware PEC */ 895 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv)); 896 else 897 outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), 898 SMBAUXCTL(priv)); 899 900 if (size == I2C_SMBUS_BLOCK_DATA || 901 size == I2C_SMBUS_I2C_BLOCK_DATA || 902 size == I2C_SMBUS_BLOCK_PROC_CALL) 903 ret = i801_block_transaction(priv, data, addr, command, read_write, size); 904 else 905 ret = i801_simple_transaction(priv, data, addr, command, read_write, size); 906 907 ret = i801_check_post(priv, ret); 908 909 /* Some BIOSes don't like it when PEC is enabled at reboot or resume 910 * time, so we forcibly disable it after every transaction. 911 */ 912 if (hwpec) 913 outb_p(inb_p(SMBAUXCTL(priv)) & ~SMBAUXCTL_CRC, SMBAUXCTL(priv)); 914 out: 915 /* 916 * Unlock the SMBus device for use by BIOS/ACPI, 917 * and clear status flags if not done already. 918 */ 919 outb_p(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv)); 920 921 pm_runtime_mark_last_busy(&priv->pci_dev->dev); 922 pm_runtime_put_autosuspend(&priv->pci_dev->dev); 923 mutex_unlock(&priv->acpi_lock); 924 return ret; 925 } 926 927 928 static u32 i801_func(struct i2c_adapter *adapter) 929 { 930 struct i801_priv *priv = i2c_get_adapdata(adapter); 931 932 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | 933 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | 934 I2C_FUNC_SMBUS_PROC_CALL | 935 I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | 936 ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | 937 ((priv->features & FEATURE_BLOCK_PROC) ? 938 I2C_FUNC_SMBUS_BLOCK_PROC_CALL : 0) | 939 ((priv->features & FEATURE_I2C_BLOCK_READ) ? 940 I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) | 941 ((priv->features & FEATURE_HOST_NOTIFY) ? 942 I2C_FUNC_SMBUS_HOST_NOTIFY : 0); 943 } 944 945 static void i801_enable_host_notify(struct i2c_adapter *adapter) 946 { 947 struct i801_priv *priv = i2c_get_adapdata(adapter); 948 949 if (!(priv->features & FEATURE_HOST_NOTIFY)) 950 return; 951 952 /* 953 * Enable host notify interrupt and block the generation of interrupt 954 * from the SMB_ALERT signal because the driver does not support 955 * SMBus Alert. 956 */ 957 outb_p(SMBSLVCMD_HST_NTFY_INTREN | SMBSLVCMD_SMBALERT_DISABLE | 958 priv->original_slvcmd, SMBSLVCMD(priv)); 959 960 /* clear Host Notify bit to allow a new notification */ 961 outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv)); 962 } 963 964 static void i801_disable_host_notify(struct i801_priv *priv) 965 { 966 if (!(priv->features & FEATURE_HOST_NOTIFY)) 967 return; 968 969 outb_p(priv->original_slvcmd, SMBSLVCMD(priv)); 970 } 971 972 static const struct i2c_algorithm smbus_algorithm = { 973 .smbus_xfer = i801_access, 974 .functionality = i801_func, 975 }; 976 977 #define FEATURES_ICH5 (FEATURE_BLOCK_PROC | FEATURE_I2C_BLOCK_READ | \ 978 FEATURE_IRQ | FEATURE_SMBUS_PEC | \ 979 FEATURE_BLOCK_BUFFER | FEATURE_HOST_NOTIFY) 980 #define FEATURES_ICH4 (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER | \ 981 FEATURE_HOST_NOTIFY) 982 983 static const struct pci_device_id i801_ids[] = { 984 { PCI_DEVICE_DATA(INTEL, 82801AA_3, 0) }, 985 { PCI_DEVICE_DATA(INTEL, 82801AB_3, 0) }, 986 { PCI_DEVICE_DATA(INTEL, 82801BA_2, 0) }, 987 { PCI_DEVICE_DATA(INTEL, 82801CA_3, FEATURE_HOST_NOTIFY) }, 988 { PCI_DEVICE_DATA(INTEL, 82801DB_3, FEATURES_ICH4) }, 989 { PCI_DEVICE_DATA(INTEL, 82801EB_3, FEATURES_ICH5) }, 990 { PCI_DEVICE_DATA(INTEL, ESB_4, FEATURES_ICH5) }, 991 { PCI_DEVICE_DATA(INTEL, ICH6_16, FEATURES_ICH5) }, 992 { PCI_DEVICE_DATA(INTEL, ICH7_17, FEATURES_ICH5) }, 993 { PCI_DEVICE_DATA(INTEL, ESB2_17, FEATURES_ICH5) }, 994 { PCI_DEVICE_DATA(INTEL, ICH8_5, FEATURES_ICH5) }, 995 { PCI_DEVICE_DATA(INTEL, ICH9_6, FEATURES_ICH5) }, 996 { PCI_DEVICE_DATA(INTEL, EP80579_1, FEATURES_ICH5) }, 997 { PCI_DEVICE_DATA(INTEL, ICH10_4, FEATURES_ICH5) }, 998 { PCI_DEVICE_DATA(INTEL, ICH10_5, FEATURES_ICH5) }, 999 { PCI_DEVICE_DATA(INTEL, 5_3400_SERIES_SMBUS, FEATURES_ICH5) }, 1000 { PCI_DEVICE_DATA(INTEL, COUGARPOINT_SMBUS, FEATURES_ICH5) }, 1001 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS, FEATURES_ICH5) }, 1002 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF0, FEATURES_ICH5 | FEATURE_IDF) }, 1003 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF1, FEATURES_ICH5 | FEATURE_IDF) }, 1004 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF2, FEATURES_ICH5 | FEATURE_IDF) }, 1005 { PCI_DEVICE_DATA(INTEL, DH89XXCC_SMBUS, FEATURES_ICH5) }, 1006 { PCI_DEVICE_DATA(INTEL, PANTHERPOINT_SMBUS, FEATURES_ICH5) }, 1007 { PCI_DEVICE_DATA(INTEL, LYNXPOINT_SMBUS, FEATURES_ICH5) }, 1008 { PCI_DEVICE_DATA(INTEL, LYNXPOINT_LP_SMBUS, FEATURES_ICH5) }, 1009 { PCI_DEVICE_DATA(INTEL, AVOTON_SMBUS, FEATURES_ICH5) }, 1010 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS, FEATURES_ICH5) }, 1011 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS0, FEATURES_ICH5 | FEATURE_IDF) }, 1012 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS1, FEATURES_ICH5 | FEATURE_IDF) }, 1013 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS2, FEATURES_ICH5 | FEATURE_IDF) }, 1014 { PCI_DEVICE_DATA(INTEL, COLETOCREEK_SMBUS, FEATURES_ICH5) }, 1015 { PCI_DEVICE_DATA(INTEL, GEMINILAKE_SMBUS, FEATURES_ICH5) }, 1016 { PCI_DEVICE_DATA(INTEL, WILDCATPOINT_SMBUS, FEATURES_ICH5) }, 1017 { PCI_DEVICE_DATA(INTEL, WILDCATPOINT_LP_SMBUS, FEATURES_ICH5) }, 1018 { PCI_DEVICE_DATA(INTEL, BAYTRAIL_SMBUS, FEATURES_ICH5) }, 1019 { PCI_DEVICE_DATA(INTEL, BRASWELL_SMBUS, FEATURES_ICH5) }, 1020 { PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1021 { PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1022 { PCI_DEVICE_DATA(INTEL, CDF_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1023 { PCI_DEVICE_DATA(INTEL, DNV_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1024 { PCI_DEVICE_DATA(INTEL, EBG_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1025 { PCI_DEVICE_DATA(INTEL, BROXTON_SMBUS, FEATURES_ICH5) }, 1026 { PCI_DEVICE_DATA(INTEL, LEWISBURG_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1027 { PCI_DEVICE_DATA(INTEL, LEWISBURG_SSKU_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1028 { PCI_DEVICE_DATA(INTEL, KABYLAKE_PCH_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1029 { PCI_DEVICE_DATA(INTEL, CANNONLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1030 { PCI_DEVICE_DATA(INTEL, CANNONLAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1031 { PCI_DEVICE_DATA(INTEL, ICELAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1032 { PCI_DEVICE_DATA(INTEL, ICELAKE_N_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1033 { PCI_DEVICE_DATA(INTEL, COMETLAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1034 { PCI_DEVICE_DATA(INTEL, COMETLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1035 { PCI_DEVICE_DATA(INTEL, COMETLAKE_V_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) }, 1036 { PCI_DEVICE_DATA(INTEL, ELKHART_LAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1037 { PCI_DEVICE_DATA(INTEL, TIGERLAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1038 { PCI_DEVICE_DATA(INTEL, TIGERLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1039 { PCI_DEVICE_DATA(INTEL, JASPER_LAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1040 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1041 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1042 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_M_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1043 { PCI_DEVICE_DATA(INTEL, RAPTOR_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1044 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1045 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_SOC_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1046 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_PCH_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, 1047 { 0, } 1048 }; 1049 1050 MODULE_DEVICE_TABLE(pci, i801_ids); 1051 1052 #if defined CONFIG_X86 && defined CONFIG_DMI 1053 static unsigned char apanel_addr; 1054 1055 /* Scan the system ROM for the signature "FJKEYINF" */ 1056 static __init const void __iomem *bios_signature(const void __iomem *bios) 1057 { 1058 ssize_t offset; 1059 const unsigned char signature[] = "FJKEYINF"; 1060 1061 for (offset = 0; offset < 0x10000; offset += 0x10) { 1062 if (check_signature(bios + offset, signature, 1063 sizeof(signature)-1)) 1064 return bios + offset; 1065 } 1066 return NULL; 1067 } 1068 1069 static void __init input_apanel_init(void) 1070 { 1071 void __iomem *bios; 1072 const void __iomem *p; 1073 1074 bios = ioremap(0xF0000, 0x10000); /* Can't fail */ 1075 p = bios_signature(bios); 1076 if (p) { 1077 /* just use the first address */ 1078 apanel_addr = readb(p + 8 + 3) >> 1; 1079 } 1080 iounmap(bios); 1081 } 1082 1083 struct dmi_onboard_device_info { 1084 const char *name; 1085 u8 type; 1086 unsigned short i2c_addr; 1087 const char *i2c_type; 1088 }; 1089 1090 static const struct dmi_onboard_device_info dmi_devices[] = { 1091 { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" }, 1092 { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" }, 1093 { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" }, 1094 }; 1095 1096 static void dmi_check_onboard_device(u8 type, const char *name, 1097 struct i2c_adapter *adap) 1098 { 1099 int i; 1100 struct i2c_board_info info; 1101 1102 for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) { 1103 /* & ~0x80, ignore enabled/disabled bit */ 1104 if ((type & ~0x80) != dmi_devices[i].type) 1105 continue; 1106 if (strcasecmp(name, dmi_devices[i].name)) 1107 continue; 1108 1109 memset(&info, 0, sizeof(struct i2c_board_info)); 1110 info.addr = dmi_devices[i].i2c_addr; 1111 strscpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE); 1112 i2c_new_client_device(adap, &info); 1113 break; 1114 } 1115 } 1116 1117 /* We use our own function to check for onboard devices instead of 1118 dmi_find_device() as some buggy BIOS's have the devices we are interested 1119 in marked as disabled */ 1120 static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap) 1121 { 1122 int i, count; 1123 1124 if (dm->type != 10) 1125 return; 1126 1127 count = (dm->length - sizeof(struct dmi_header)) / 2; 1128 for (i = 0; i < count; i++) { 1129 const u8 *d = (char *)(dm + 1) + (i * 2); 1130 const char *name = ((char *) dm) + dm->length; 1131 u8 type = d[0]; 1132 u8 s = d[1]; 1133 1134 if (!s) 1135 continue; 1136 s--; 1137 while (s > 0 && name[0]) { 1138 name += strlen(name) + 1; 1139 s--; 1140 } 1141 if (name[0] == 0) /* Bogus string reference */ 1142 continue; 1143 1144 dmi_check_onboard_device(type, name, adap); 1145 } 1146 } 1147 1148 /* NOTE: Keep this list in sync with drivers/platform/x86/dell-smo8800.c */ 1149 static const char *const acpi_smo8800_ids[] = { 1150 "SMO8800", 1151 "SMO8801", 1152 "SMO8810", 1153 "SMO8811", 1154 "SMO8820", 1155 "SMO8821", 1156 "SMO8830", 1157 "SMO8831", 1158 }; 1159 1160 static acpi_status check_acpi_smo88xx_device(acpi_handle obj_handle, 1161 u32 nesting_level, 1162 void *context, 1163 void **return_value) 1164 { 1165 struct acpi_device_info *info; 1166 acpi_status status; 1167 char *hid; 1168 int i; 1169 1170 status = acpi_get_object_info(obj_handle, &info); 1171 if (ACPI_FAILURE(status)) 1172 return AE_OK; 1173 1174 if (!(info->valid & ACPI_VALID_HID)) 1175 goto smo88xx_not_found; 1176 1177 hid = info->hardware_id.string; 1178 if (!hid) 1179 goto smo88xx_not_found; 1180 1181 i = match_string(acpi_smo8800_ids, ARRAY_SIZE(acpi_smo8800_ids), hid); 1182 if (i < 0) 1183 goto smo88xx_not_found; 1184 1185 kfree(info); 1186 1187 *return_value = NULL; 1188 return AE_CTRL_TERMINATE; 1189 1190 smo88xx_not_found: 1191 kfree(info); 1192 return AE_OK; 1193 } 1194 1195 static bool is_dell_system_with_lis3lv02d(void) 1196 { 1197 void *err = ERR_PTR(-ENOENT); 1198 1199 if (!dmi_match(DMI_SYS_VENDOR, "Dell Inc.")) 1200 return false; 1201 1202 /* 1203 * Check that ACPI device SMO88xx is present and is functioning. 1204 * Function acpi_get_devices() already filters all ACPI devices 1205 * which are not present or are not functioning. 1206 * ACPI device SMO88xx represents our ST microelectronics lis3lv02d 1207 * accelerometer but unfortunately ACPI does not provide any other 1208 * information (like I2C address). 1209 */ 1210 acpi_get_devices(NULL, check_acpi_smo88xx_device, NULL, &err); 1211 1212 return !IS_ERR(err); 1213 } 1214 1215 /* 1216 * Accelerometer's I2C address is not specified in DMI nor ACPI, 1217 * so it is needed to define mapping table based on DMI product names. 1218 */ 1219 static const struct { 1220 const char *dmi_product_name; 1221 unsigned short i2c_addr; 1222 } dell_lis3lv02d_devices[] = { 1223 /* 1224 * Dell platform team told us that these Latitude devices have 1225 * ST microelectronics accelerometer at I2C address 0x29. 1226 */ 1227 { "Latitude E5250", 0x29 }, 1228 { "Latitude E5450", 0x29 }, 1229 { "Latitude E5550", 0x29 }, 1230 { "Latitude E6440", 0x29 }, 1231 { "Latitude E6440 ATG", 0x29 }, 1232 { "Latitude E6540", 0x29 }, 1233 /* 1234 * Additional individual entries were added after verification. 1235 */ 1236 { "Latitude 5480", 0x29 }, 1237 { "Vostro V131", 0x1d }, 1238 { "Vostro 5568", 0x29 }, 1239 }; 1240 1241 static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv) 1242 { 1243 struct i2c_board_info info; 1244 const char *dmi_product_name; 1245 int i; 1246 1247 dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); 1248 for (i = 0; i < ARRAY_SIZE(dell_lis3lv02d_devices); ++i) { 1249 if (strcmp(dmi_product_name, 1250 dell_lis3lv02d_devices[i].dmi_product_name) == 0) 1251 break; 1252 } 1253 1254 if (i == ARRAY_SIZE(dell_lis3lv02d_devices)) { 1255 dev_warn(&priv->pci_dev->dev, 1256 "Accelerometer lis3lv02d is present on SMBus but its" 1257 " address is unknown, skipping registration\n"); 1258 return; 1259 } 1260 1261 memset(&info, 0, sizeof(struct i2c_board_info)); 1262 info.addr = dell_lis3lv02d_devices[i].i2c_addr; 1263 strscpy(info.type, "lis3lv02d", I2C_NAME_SIZE); 1264 i2c_new_client_device(&priv->adapter, &info); 1265 } 1266 1267 /* Register optional slaves */ 1268 static void i801_probe_optional_slaves(struct i801_priv *priv) 1269 { 1270 /* Only register slaves on main SMBus channel */ 1271 if (priv->features & FEATURE_IDF) 1272 return; 1273 1274 if (apanel_addr) { 1275 struct i2c_board_info info = { 1276 .addr = apanel_addr, 1277 .type = "fujitsu_apanel", 1278 }; 1279 1280 i2c_new_client_device(&priv->adapter, &info); 1281 } 1282 1283 if (dmi_name_in_vendors("FUJITSU")) 1284 dmi_walk(dmi_check_onboard_devices, &priv->adapter); 1285 1286 if (is_dell_system_with_lis3lv02d()) 1287 register_dell_lis3lv02d_i2c_device(priv); 1288 1289 /* Instantiate SPD EEPROMs unless the SMBus is multiplexed */ 1290 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) 1291 if (!priv->mux_drvdata) 1292 #endif 1293 i2c_register_spd(&priv->adapter); 1294 } 1295 #else 1296 static void __init input_apanel_init(void) {} 1297 static void i801_probe_optional_slaves(struct i801_priv *priv) {} 1298 #endif /* CONFIG_X86 && CONFIG_DMI */ 1299 1300 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI 1301 static struct i801_mux_config i801_mux_config_asus_z8_d12 = { 1302 .gpio_chip = "gpio_ich", 1303 .values = { 0x02, 0x03 }, 1304 .n_values = 2, 1305 .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD }, 1306 .gpios = { 52, 53 }, 1307 .n_gpios = 2, 1308 }; 1309 1310 static struct i801_mux_config i801_mux_config_asus_z8_d18 = { 1311 .gpio_chip = "gpio_ich", 1312 .values = { 0x02, 0x03, 0x01 }, 1313 .n_values = 3, 1314 .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD }, 1315 .gpios = { 52, 53 }, 1316 .n_gpios = 2, 1317 }; 1318 1319 static const struct dmi_system_id mux_dmi_table[] = { 1320 { 1321 .matches = { 1322 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1323 DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"), 1324 }, 1325 .driver_data = &i801_mux_config_asus_z8_d12, 1326 }, 1327 { 1328 .matches = { 1329 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1330 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"), 1331 }, 1332 .driver_data = &i801_mux_config_asus_z8_d12, 1333 }, 1334 { 1335 .matches = { 1336 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1337 DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"), 1338 }, 1339 .driver_data = &i801_mux_config_asus_z8_d12, 1340 }, 1341 { 1342 .matches = { 1343 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1344 DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"), 1345 }, 1346 .driver_data = &i801_mux_config_asus_z8_d12, 1347 }, 1348 { 1349 .matches = { 1350 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1351 DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"), 1352 }, 1353 .driver_data = &i801_mux_config_asus_z8_d12, 1354 }, 1355 { 1356 .matches = { 1357 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1358 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"), 1359 }, 1360 .driver_data = &i801_mux_config_asus_z8_d12, 1361 }, 1362 { 1363 .matches = { 1364 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1365 DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"), 1366 }, 1367 .driver_data = &i801_mux_config_asus_z8_d18, 1368 }, 1369 { 1370 .matches = { 1371 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1372 DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"), 1373 }, 1374 .driver_data = &i801_mux_config_asus_z8_d18, 1375 }, 1376 { 1377 .matches = { 1378 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1379 DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"), 1380 }, 1381 .driver_data = &i801_mux_config_asus_z8_d12, 1382 }, 1383 { } 1384 }; 1385 1386 /* Setup multiplexing if needed */ 1387 static void i801_add_mux(struct i801_priv *priv) 1388 { 1389 struct device *dev = &priv->adapter.dev; 1390 const struct i801_mux_config *mux_config; 1391 struct i2c_mux_gpio_platform_data gpio_data; 1392 struct gpiod_lookup_table *lookup; 1393 int i; 1394 1395 if (!priv->mux_drvdata) 1396 return; 1397 mux_config = priv->mux_drvdata; 1398 1399 /* Prepare the platform data */ 1400 memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data)); 1401 gpio_data.parent = priv->adapter.nr; 1402 gpio_data.values = mux_config->values; 1403 gpio_data.n_values = mux_config->n_values; 1404 gpio_data.classes = mux_config->classes; 1405 gpio_data.idle = I2C_MUX_GPIO_NO_IDLE; 1406 1407 /* Register GPIO descriptor lookup table */ 1408 lookup = devm_kzalloc(dev, 1409 struct_size(lookup, table, mux_config->n_gpios + 1), 1410 GFP_KERNEL); 1411 if (!lookup) 1412 return; 1413 lookup->dev_id = "i2c-mux-gpio"; 1414 for (i = 0; i < mux_config->n_gpios; i++) 1415 lookup->table[i] = GPIO_LOOKUP(mux_config->gpio_chip, 1416 mux_config->gpios[i], "mux", 0); 1417 gpiod_add_lookup_table(lookup); 1418 priv->lookup = lookup; 1419 1420 /* 1421 * Register the mux device, we use PLATFORM_DEVID_NONE here 1422 * because since we are referring to the GPIO chip by name we are 1423 * anyways in deep trouble if there is more than one of these 1424 * devices, and there should likely only be one platform controller 1425 * hub. 1426 */ 1427 priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio", 1428 PLATFORM_DEVID_NONE, &gpio_data, 1429 sizeof(struct i2c_mux_gpio_platform_data)); 1430 if (IS_ERR(priv->mux_pdev)) { 1431 gpiod_remove_lookup_table(lookup); 1432 dev_err(dev, "Failed to register i2c-mux-gpio device\n"); 1433 } 1434 } 1435 1436 static void i801_del_mux(struct i801_priv *priv) 1437 { 1438 platform_device_unregister(priv->mux_pdev); 1439 gpiod_remove_lookup_table(priv->lookup); 1440 } 1441 1442 static unsigned int i801_get_adapter_class(struct i801_priv *priv) 1443 { 1444 const struct dmi_system_id *id; 1445 const struct i801_mux_config *mux_config; 1446 unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD; 1447 int i; 1448 1449 id = dmi_first_match(mux_dmi_table); 1450 if (id) { 1451 /* Remove branch classes from trunk */ 1452 mux_config = id->driver_data; 1453 for (i = 0; i < mux_config->n_values; i++) 1454 class &= ~mux_config->classes[i]; 1455 1456 /* Remember for later */ 1457 priv->mux_drvdata = mux_config; 1458 } 1459 1460 return class; 1461 } 1462 #else 1463 static inline void i801_add_mux(struct i801_priv *priv) { } 1464 static inline void i801_del_mux(struct i801_priv *priv) { } 1465 1466 static inline unsigned int i801_get_adapter_class(struct i801_priv *priv) 1467 { 1468 return I2C_CLASS_HWMON | I2C_CLASS_SPD; 1469 } 1470 #endif 1471 1472 static struct platform_device * 1473 i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev, 1474 struct resource *tco_res) 1475 { 1476 static const struct itco_wdt_platform_data pldata = { 1477 .name = "Intel PCH", 1478 .version = 4, 1479 }; 1480 struct resource *res; 1481 int ret; 1482 1483 /* 1484 * We must access the NO_REBOOT bit over the Primary to Sideband 1485 * (P2SB) bridge. 1486 */ 1487 1488 res = &tco_res[1]; 1489 ret = p2sb_bar(pci_dev->bus, 0, res); 1490 if (ret) 1491 return ERR_PTR(ret); 1492 1493 if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS) 1494 res->start += SBREG_SMBCTRL_DNV; 1495 else 1496 res->start += SBREG_SMBCTRL; 1497 1498 res->end = res->start + 3; 1499 1500 return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, 1501 tco_res, 2, &pldata, sizeof(pldata)); 1502 } 1503 1504 static struct platform_device * 1505 i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev, 1506 struct resource *tco_res) 1507 { 1508 static const struct itco_wdt_platform_data pldata = { 1509 .name = "Intel PCH", 1510 .version = 6, 1511 }; 1512 1513 return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, 1514 tco_res, 1, &pldata, sizeof(pldata)); 1515 } 1516 1517 static void i801_add_tco(struct i801_priv *priv) 1518 { 1519 struct pci_dev *pci_dev = priv->pci_dev; 1520 struct resource tco_res[2], *res; 1521 u32 tco_base, tco_ctl; 1522 1523 /* If we have ACPI based watchdog use that instead */ 1524 if (acpi_has_watchdog()) 1525 return; 1526 1527 if (!(priv->features & (FEATURE_TCO_SPT | FEATURE_TCO_CNL))) 1528 return; 1529 1530 pci_read_config_dword(pci_dev, TCOBASE, &tco_base); 1531 pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl); 1532 if (!(tco_ctl & TCOCTL_EN)) 1533 return; 1534 1535 memset(tco_res, 0, sizeof(tco_res)); 1536 /* 1537 * Always populate the main iTCO IO resource here. The second entry 1538 * for NO_REBOOT MMIO is filled by the SPT specific function. 1539 */ 1540 res = &tco_res[0]; 1541 res->start = tco_base & ~1; 1542 res->end = res->start + 32 - 1; 1543 res->flags = IORESOURCE_IO; 1544 1545 if (priv->features & FEATURE_TCO_CNL) 1546 priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res); 1547 else 1548 priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res); 1549 1550 if (IS_ERR(priv->tco_pdev)) 1551 dev_warn(&pci_dev->dev, "failed to create iTCO device\n"); 1552 } 1553 1554 #ifdef CONFIG_ACPI 1555 static bool i801_acpi_is_smbus_ioport(const struct i801_priv *priv, 1556 acpi_physical_address address) 1557 { 1558 return address >= priv->smba && 1559 address <= pci_resource_end(priv->pci_dev, SMBBAR); 1560 } 1561 1562 static acpi_status 1563 i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits, 1564 u64 *value, void *handler_context, void *region_context) 1565 { 1566 struct i801_priv *priv = handler_context; 1567 struct pci_dev *pdev = priv->pci_dev; 1568 acpi_status status; 1569 1570 /* 1571 * Once BIOS AML code touches the OpRegion we warn and inhibit any 1572 * further access from the driver itself. This device is now owned 1573 * by the system firmware. 1574 */ 1575 mutex_lock(&priv->acpi_lock); 1576 1577 if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) { 1578 priv->acpi_reserved = true; 1579 1580 dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n"); 1581 dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n"); 1582 1583 /* 1584 * BIOS is accessing the host controller so prevent it from 1585 * suspending automatically from now on. 1586 */ 1587 pm_runtime_get_sync(&pdev->dev); 1588 } 1589 1590 if ((function & ACPI_IO_MASK) == ACPI_READ) 1591 status = acpi_os_read_port(address, (u32 *)value, bits); 1592 else 1593 status = acpi_os_write_port(address, (u32)*value, bits); 1594 1595 mutex_unlock(&priv->acpi_lock); 1596 1597 return status; 1598 } 1599 1600 static int i801_acpi_probe(struct i801_priv *priv) 1601 { 1602 acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev); 1603 acpi_status status; 1604 1605 status = acpi_install_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO, 1606 i801_acpi_io_handler, NULL, priv); 1607 if (ACPI_SUCCESS(status)) 1608 return 0; 1609 1610 return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]); 1611 } 1612 1613 static void i801_acpi_remove(struct i801_priv *priv) 1614 { 1615 acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev); 1616 1617 acpi_remove_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler); 1618 } 1619 #else 1620 static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; } 1621 static inline void i801_acpi_remove(struct i801_priv *priv) { } 1622 #endif 1623 1624 static void i801_setup_hstcfg(struct i801_priv *priv) 1625 { 1626 unsigned char hstcfg = priv->original_hstcfg; 1627 1628 hstcfg &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */ 1629 hstcfg |= SMBHSTCFG_HST_EN; 1630 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg); 1631 } 1632 1633 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) 1634 { 1635 int err, i; 1636 struct i801_priv *priv; 1637 1638 priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL); 1639 if (!priv) 1640 return -ENOMEM; 1641 1642 i2c_set_adapdata(&priv->adapter, priv); 1643 priv->adapter.owner = THIS_MODULE; 1644 priv->adapter.class = i801_get_adapter_class(priv); 1645 priv->adapter.algo = &smbus_algorithm; 1646 priv->adapter.dev.parent = &dev->dev; 1647 ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev)); 1648 priv->adapter.retries = 3; 1649 mutex_init(&priv->acpi_lock); 1650 1651 priv->pci_dev = dev; 1652 priv->features = id->driver_data; 1653 1654 /* Disable features on user request */ 1655 for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) { 1656 if (priv->features & disable_features & (1 << i)) 1657 dev_notice(&dev->dev, "%s disabled by user\n", 1658 i801_feature_names[i]); 1659 } 1660 priv->features &= ~disable_features; 1661 1662 /* The block process call uses block buffer mode */ 1663 if (!(priv->features & FEATURE_BLOCK_BUFFER)) 1664 priv->features &= ~FEATURE_BLOCK_PROC; 1665 1666 err = pcim_enable_device(dev); 1667 if (err) { 1668 dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n", 1669 err); 1670 return err; 1671 } 1672 pcim_pin_device(dev); 1673 1674 /* Determine the address of the SMBus area */ 1675 priv->smba = pci_resource_start(dev, SMBBAR); 1676 if (!priv->smba) { 1677 dev_err(&dev->dev, 1678 "SMBus base address uninitialized, upgrade BIOS\n"); 1679 return -ENODEV; 1680 } 1681 1682 if (i801_acpi_probe(priv)) 1683 return -ENODEV; 1684 1685 err = pcim_iomap_regions(dev, 1 << SMBBAR, DRV_NAME); 1686 if (err) { 1687 dev_err(&dev->dev, 1688 "Failed to request SMBus region 0x%lx-0x%Lx\n", 1689 priv->smba, 1690 (unsigned long long)pci_resource_end(dev, SMBBAR)); 1691 i801_acpi_remove(priv); 1692 return err; 1693 } 1694 1695 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg); 1696 i801_setup_hstcfg(priv); 1697 if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN)) 1698 dev_info(&dev->dev, "Enabling SMBus device\n"); 1699 1700 if (priv->original_hstcfg & SMBHSTCFG_SMB_SMI_EN) { 1701 dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n"); 1702 /* Disable SMBus interrupt feature if SMBus using SMI# */ 1703 priv->features &= ~FEATURE_IRQ; 1704 } 1705 if (priv->original_hstcfg & SMBHSTCFG_SPD_WD) 1706 dev_info(&dev->dev, "SPD Write Disable is set\n"); 1707 1708 /* Clear special mode bits */ 1709 if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) 1710 outb_p(inb_p(SMBAUXCTL(priv)) & 1711 ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); 1712 1713 /* Default timeout in interrupt mode: 200 ms */ 1714 priv->adapter.timeout = HZ / 5; 1715 1716 if (dev->irq == IRQ_NOTCONNECTED) 1717 priv->features &= ~FEATURE_IRQ; 1718 1719 if (priv->features & FEATURE_IRQ) { 1720 u16 pcists; 1721 1722 /* Complain if an interrupt is already pending */ 1723 pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists); 1724 if (pcists & PCI_STATUS_INTERRUPT) 1725 dev_warn(&dev->dev, "An interrupt is pending!\n"); 1726 } 1727 1728 if (priv->features & FEATURE_IRQ) { 1729 init_completion(&priv->done); 1730 1731 err = devm_request_irq(&dev->dev, dev->irq, i801_isr, 1732 IRQF_SHARED, DRV_NAME, priv); 1733 if (err) { 1734 dev_err(&dev->dev, "Failed to allocate irq %d: %d\n", 1735 dev->irq, err); 1736 priv->features &= ~FEATURE_IRQ; 1737 } 1738 } 1739 dev_info(&dev->dev, "SMBus using %s\n", 1740 priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling"); 1741 1742 /* Host notification uses an interrupt */ 1743 if (!(priv->features & FEATURE_IRQ)) 1744 priv->features &= ~FEATURE_HOST_NOTIFY; 1745 1746 /* Remember original Interrupt and Host Notify settings */ 1747 priv->original_hstcnt = inb_p(SMBHSTCNT(priv)) & ~SMBHSTCNT_KILL; 1748 if (priv->features & FEATURE_HOST_NOTIFY) 1749 priv->original_slvcmd = inb_p(SMBSLVCMD(priv)); 1750 1751 i801_add_tco(priv); 1752 1753 snprintf(priv->adapter.name, sizeof(priv->adapter.name), 1754 "SMBus I801 adapter at %04lx", priv->smba); 1755 err = i2c_add_adapter(&priv->adapter); 1756 if (err) { 1757 platform_device_unregister(priv->tco_pdev); 1758 i801_acpi_remove(priv); 1759 return err; 1760 } 1761 1762 i801_enable_host_notify(&priv->adapter); 1763 1764 i801_probe_optional_slaves(priv); 1765 /* We ignore errors - multiplexing is optional */ 1766 i801_add_mux(priv); 1767 1768 pci_set_drvdata(dev, priv); 1769 1770 dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE); 1771 pm_runtime_set_autosuspend_delay(&dev->dev, 1000); 1772 pm_runtime_use_autosuspend(&dev->dev); 1773 pm_runtime_put_autosuspend(&dev->dev); 1774 pm_runtime_allow(&dev->dev); 1775 1776 return 0; 1777 } 1778 1779 static void i801_remove(struct pci_dev *dev) 1780 { 1781 struct i801_priv *priv = pci_get_drvdata(dev); 1782 1783 outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); 1784 i801_disable_host_notify(priv); 1785 i801_del_mux(priv); 1786 i2c_del_adapter(&priv->adapter); 1787 i801_acpi_remove(priv); 1788 pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); 1789 1790 platform_device_unregister(priv->tco_pdev); 1791 1792 /* if acpi_reserved is set then usage_count is incremented already */ 1793 if (!priv->acpi_reserved) 1794 pm_runtime_get_noresume(&dev->dev); 1795 1796 /* 1797 * do not call pci_disable_device(dev) since it can cause hard hangs on 1798 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010) 1799 */ 1800 } 1801 1802 static void i801_shutdown(struct pci_dev *dev) 1803 { 1804 struct i801_priv *priv = pci_get_drvdata(dev); 1805 1806 /* Restore config registers to avoid hard hang on some systems */ 1807 outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); 1808 i801_disable_host_notify(priv); 1809 pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); 1810 } 1811 1812 static int i801_suspend(struct device *dev) 1813 { 1814 struct i801_priv *priv = dev_get_drvdata(dev); 1815 1816 outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); 1817 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg); 1818 return 0; 1819 } 1820 1821 static int i801_resume(struct device *dev) 1822 { 1823 struct i801_priv *priv = dev_get_drvdata(dev); 1824 1825 i801_setup_hstcfg(priv); 1826 i801_enable_host_notify(&priv->adapter); 1827 1828 return 0; 1829 } 1830 1831 static DEFINE_SIMPLE_DEV_PM_OPS(i801_pm_ops, i801_suspend, i801_resume); 1832 1833 static struct pci_driver i801_driver = { 1834 .name = DRV_NAME, 1835 .id_table = i801_ids, 1836 .probe = i801_probe, 1837 .remove = i801_remove, 1838 .shutdown = i801_shutdown, 1839 .driver = { 1840 .pm = pm_sleep_ptr(&i801_pm_ops), 1841 .probe_type = PROBE_PREFER_ASYNCHRONOUS, 1842 }, 1843 }; 1844 1845 static int __init i2c_i801_init(void) 1846 { 1847 if (dmi_name_in_vendors("FUJITSU")) 1848 input_apanel_init(); 1849 return pci_register_driver(&i801_driver); 1850 } 1851 1852 static void __exit i2c_i801_exit(void) 1853 { 1854 pci_unregister_driver(&i801_driver); 1855 } 1856 1857 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); 1858 MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); 1859 MODULE_DESCRIPTION("I801 SMBus driver"); 1860 MODULE_LICENSE("GPL"); 1861 1862 module_init(i2c_i801_init); 1863 module_exit(i2c_i801_exit); 1864