1 /* 2 Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, 3 Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker 4 <mdsxyz123@yahoo.com> 5 Copyright (C) 2007 - 2012 Jean Delvare <khali@linux-fr.org> 6 Copyright (C) 2010 Intel Corporation, 7 David Woodhouse <dwmw2@infradead.org> 8 9 This program is free software; you can redistribute it and/or modify 10 it under the terms of the GNU General Public License as published by 11 the Free Software Foundation; either version 2 of the License, or 12 (at your option) any later version. 13 14 This program is distributed in the hope that it will be useful, 15 but WITHOUT ANY WARRANTY; without even the implied warranty of 16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 GNU General Public License for more details. 18 19 You should have received a copy of the GNU General Public License 20 along with this program; if not, write to the Free Software 21 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 22 */ 23 24 /* 25 Supports the following Intel I/O Controller Hubs (ICH): 26 27 I/O Block I2C 28 region SMBus Block proc. block 29 Chip name PCI ID size PEC buffer call read 30 ---------------------------------------------------------------------- 31 82801AA (ICH) 0x2413 16 no no no no 32 82801AB (ICH0) 0x2423 16 no no no no 33 82801BA (ICH2) 0x2443 16 no no no no 34 82801CA (ICH3) 0x2483 32 soft no no no 35 82801DB (ICH4) 0x24c3 32 hard yes no no 36 82801E (ICH5) 0x24d3 32 hard yes yes yes 37 6300ESB 0x25a4 32 hard yes yes yes 38 82801F (ICH6) 0x266a 32 hard yes yes yes 39 6310ESB/6320ESB 0x269b 32 hard yes yes yes 40 82801G (ICH7) 0x27da 32 hard yes yes yes 41 82801H (ICH8) 0x283e 32 hard yes yes yes 42 82801I (ICH9) 0x2930 32 hard yes yes yes 43 EP80579 (Tolapai) 0x5032 32 hard yes yes yes 44 ICH10 0x3a30 32 hard yes yes yes 45 ICH10 0x3a60 32 hard yes yes yes 46 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes 47 6 Series (PCH) 0x1c22 32 hard yes yes yes 48 Patsburg (PCH) 0x1d22 32 hard yes yes yes 49 Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes 50 Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes 51 Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes 52 DH89xxCC (PCH) 0x2330 32 hard yes yes yes 53 Panther Point (PCH) 0x1e22 32 hard yes yes yes 54 Lynx Point (PCH) 0x8c22 32 hard yes yes yes 55 Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes 56 57 Features supported by this driver: 58 Software PEC no 59 Hardware PEC yes 60 Block buffer yes 61 Block process call transaction no 62 I2C block read transaction yes (doesn't use the block buffer) 63 Slave mode no 64 Interrupt processing yes 65 66 See the file Documentation/i2c/busses/i2c-i801 for details. 67 */ 68 69 #include <linux/interrupt.h> 70 #include <linux/module.h> 71 #include <linux/pci.h> 72 #include <linux/kernel.h> 73 #include <linux/stddef.h> 74 #include <linux/delay.h> 75 #include <linux/ioport.h> 76 #include <linux/init.h> 77 #include <linux/i2c.h> 78 #include <linux/acpi.h> 79 #include <linux/io.h> 80 #include <linux/dmi.h> 81 #include <linux/slab.h> 82 #include <linux/wait.h> 83 #include <linux/err.h> 84 85 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ 86 defined CONFIG_DMI 87 #include <linux/gpio.h> 88 #include <linux/i2c-mux-gpio.h> 89 #include <linux/platform_device.h> 90 #endif 91 92 /* I801 SMBus address offsets */ 93 #define SMBHSTSTS(p) (0 + (p)->smba) 94 #define SMBHSTCNT(p) (2 + (p)->smba) 95 #define SMBHSTCMD(p) (3 + (p)->smba) 96 #define SMBHSTADD(p) (4 + (p)->smba) 97 #define SMBHSTDAT0(p) (5 + (p)->smba) 98 #define SMBHSTDAT1(p) (6 + (p)->smba) 99 #define SMBBLKDAT(p) (7 + (p)->smba) 100 #define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */ 101 #define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */ 102 #define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */ 103 104 /* PCI Address Constants */ 105 #define SMBBAR 4 106 #define SMBPCISTS 0x006 107 #define SMBHSTCFG 0x040 108 109 /* Host status bits for SMBPCISTS */ 110 #define SMBPCISTS_INTS 0x08 111 112 /* Host configuration bits for SMBHSTCFG */ 113 #define SMBHSTCFG_HST_EN 1 114 #define SMBHSTCFG_SMB_SMI_EN 2 115 #define SMBHSTCFG_I2C_EN 4 116 117 /* Auxiliary control register bits, ICH4+ only */ 118 #define SMBAUXCTL_CRC 1 119 #define SMBAUXCTL_E32B 2 120 121 /* Other settings */ 122 #define MAX_RETRIES 400 123 124 /* I801 command constants */ 125 #define I801_QUICK 0x00 126 #define I801_BYTE 0x04 127 #define I801_BYTE_DATA 0x08 128 #define I801_WORD_DATA 0x0C 129 #define I801_PROC_CALL 0x10 /* unimplemented */ 130 #define I801_BLOCK_DATA 0x14 131 #define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */ 132 133 /* I801 Host Control register bits */ 134 #define SMBHSTCNT_INTREN 0x01 135 #define SMBHSTCNT_KILL 0x02 136 #define SMBHSTCNT_LAST_BYTE 0x20 137 #define SMBHSTCNT_START 0x40 138 #define SMBHSTCNT_PEC_EN 0x80 /* ICH3 and later */ 139 140 /* I801 Hosts Status register bits */ 141 #define SMBHSTSTS_BYTE_DONE 0x80 142 #define SMBHSTSTS_INUSE_STS 0x40 143 #define SMBHSTSTS_SMBALERT_STS 0x20 144 #define SMBHSTSTS_FAILED 0x10 145 #define SMBHSTSTS_BUS_ERR 0x08 146 #define SMBHSTSTS_DEV_ERR 0x04 147 #define SMBHSTSTS_INTR 0x02 148 #define SMBHSTSTS_HOST_BUSY 0x01 149 150 #define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \ 151 SMBHSTSTS_DEV_ERR) 152 153 #define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \ 154 STATUS_ERROR_FLAGS) 155 156 /* Older devices have their ID defined in <linux/pci_ids.h> */ 157 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 158 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 159 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */ 160 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70 161 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71 162 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72 163 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 164 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 165 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 166 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 167 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 168 169 struct i801_mux_config { 170 char *gpio_chip; 171 unsigned values[3]; 172 int n_values; 173 unsigned classes[3]; 174 unsigned gpios[2]; /* Relative to gpio_chip->base */ 175 int n_gpios; 176 }; 177 178 struct i801_priv { 179 struct i2c_adapter adapter; 180 unsigned long smba; 181 unsigned char original_hstcfg; 182 struct pci_dev *pci_dev; 183 unsigned int features; 184 185 /* isr processing */ 186 wait_queue_head_t waitq; 187 u8 status; 188 189 /* Command state used by isr for byte-by-byte block transactions */ 190 u8 cmd; 191 bool is_read; 192 int count; 193 int len; 194 u8 *data; 195 196 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ 197 defined CONFIG_DMI 198 const struct i801_mux_config *mux_drvdata; 199 struct platform_device *mux_pdev; 200 #endif 201 }; 202 203 static struct pci_driver i801_driver; 204 205 #define FEATURE_SMBUS_PEC (1 << 0) 206 #define FEATURE_BLOCK_BUFFER (1 << 1) 207 #define FEATURE_BLOCK_PROC (1 << 2) 208 #define FEATURE_I2C_BLOCK_READ (1 << 3) 209 #define FEATURE_IRQ (1 << 4) 210 /* Not really a feature, but it's convenient to handle it as such */ 211 #define FEATURE_IDF (1 << 15) 212 213 static const char *i801_feature_names[] = { 214 "SMBus PEC", 215 "Block buffer", 216 "Block process call", 217 "I2C block read", 218 "Interrupt", 219 }; 220 221 static unsigned int disable_features; 222 module_param(disable_features, uint, S_IRUGO | S_IWUSR); 223 MODULE_PARM_DESC(disable_features, "Disable selected driver features"); 224 225 /* Make sure the SMBus host is ready to start transmitting. 226 Return 0 if it is, -EBUSY if it is not. */ 227 static int i801_check_pre(struct i801_priv *priv) 228 { 229 int status; 230 231 status = inb_p(SMBHSTSTS(priv)); 232 if (status & SMBHSTSTS_HOST_BUSY) { 233 dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n"); 234 return -EBUSY; 235 } 236 237 status &= STATUS_FLAGS; 238 if (status) { 239 dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n", 240 status); 241 outb_p(status, SMBHSTSTS(priv)); 242 status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS; 243 if (status) { 244 dev_err(&priv->pci_dev->dev, 245 "Failed clearing status flags (%02x)\n", 246 status); 247 return -EBUSY; 248 } 249 } 250 251 return 0; 252 } 253 254 /* 255 * Convert the status register to an error code, and clear it. 256 * Note that status only contains the bits we want to clear, not the 257 * actual register value. 258 */ 259 static int i801_check_post(struct i801_priv *priv, int status) 260 { 261 int result = 0; 262 263 /* 264 * If the SMBus is still busy, we give up 265 * Note: This timeout condition only happens when using polling 266 * transactions. For interrupt operation, NAK/timeout is indicated by 267 * DEV_ERR. 268 */ 269 if (unlikely(status < 0)) { 270 dev_err(&priv->pci_dev->dev, "Transaction timeout\n"); 271 /* try to stop the current command */ 272 dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n"); 273 outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, 274 SMBHSTCNT(priv)); 275 usleep_range(1000, 2000); 276 outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), 277 SMBHSTCNT(priv)); 278 279 /* Check if it worked */ 280 status = inb_p(SMBHSTSTS(priv)); 281 if ((status & SMBHSTSTS_HOST_BUSY) || 282 !(status & SMBHSTSTS_FAILED)) 283 dev_err(&priv->pci_dev->dev, 284 "Failed terminating the transaction\n"); 285 outb_p(STATUS_FLAGS, SMBHSTSTS(priv)); 286 return -ETIMEDOUT; 287 } 288 289 if (status & SMBHSTSTS_FAILED) { 290 result = -EIO; 291 dev_err(&priv->pci_dev->dev, "Transaction failed\n"); 292 } 293 if (status & SMBHSTSTS_DEV_ERR) { 294 result = -ENXIO; 295 dev_dbg(&priv->pci_dev->dev, "No response\n"); 296 } 297 if (status & SMBHSTSTS_BUS_ERR) { 298 result = -EAGAIN; 299 dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n"); 300 } 301 302 /* Clear status flags except BYTE_DONE, to be cleared by caller */ 303 outb_p(status, SMBHSTSTS(priv)); 304 305 return result; 306 } 307 308 /* Wait for BUSY being cleared and either INTR or an error flag being set */ 309 static int i801_wait_intr(struct i801_priv *priv) 310 { 311 int timeout = 0; 312 int status; 313 314 /* We will always wait for a fraction of a second! */ 315 do { 316 usleep_range(250, 500); 317 status = inb_p(SMBHSTSTS(priv)); 318 } while (((status & SMBHSTSTS_HOST_BUSY) || 319 !(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR))) && 320 (timeout++ < MAX_RETRIES)); 321 322 if (timeout > MAX_RETRIES) { 323 dev_dbg(&priv->pci_dev->dev, "INTR Timeout!\n"); 324 return -ETIMEDOUT; 325 } 326 return status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR); 327 } 328 329 /* Wait for either BYTE_DONE or an error flag being set */ 330 static int i801_wait_byte_done(struct i801_priv *priv) 331 { 332 int timeout = 0; 333 int status; 334 335 /* We will always wait for a fraction of a second! */ 336 do { 337 usleep_range(250, 500); 338 status = inb_p(SMBHSTSTS(priv)); 339 } while (!(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) && 340 (timeout++ < MAX_RETRIES)); 341 342 if (timeout > MAX_RETRIES) { 343 dev_dbg(&priv->pci_dev->dev, "BYTE_DONE Timeout!\n"); 344 return -ETIMEDOUT; 345 } 346 return status & STATUS_ERROR_FLAGS; 347 } 348 349 static int i801_transaction(struct i801_priv *priv, int xact) 350 { 351 int status; 352 int result; 353 354 result = i801_check_pre(priv); 355 if (result < 0) 356 return result; 357 358 if (priv->features & FEATURE_IRQ) { 359 outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START, 360 SMBHSTCNT(priv)); 361 wait_event(priv->waitq, (status = priv->status)); 362 priv->status = 0; 363 return i801_check_post(priv, status); 364 } 365 366 /* the current contents of SMBHSTCNT can be overwritten, since PEC, 367 * SMBSCMD are passed in xact */ 368 outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv)); 369 370 status = i801_wait_intr(priv); 371 return i801_check_post(priv, status); 372 } 373 374 static int i801_block_transaction_by_block(struct i801_priv *priv, 375 union i2c_smbus_data *data, 376 char read_write, int hwpec) 377 { 378 int i, len; 379 int status; 380 381 inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */ 382 383 /* Use 32-byte buffer to process this transaction */ 384 if (read_write == I2C_SMBUS_WRITE) { 385 len = data->block[0]; 386 outb_p(len, SMBHSTDAT0(priv)); 387 for (i = 0; i < len; i++) 388 outb_p(data->block[i+1], SMBBLKDAT(priv)); 389 } 390 391 status = i801_transaction(priv, I801_BLOCK_DATA | 392 (hwpec ? SMBHSTCNT_PEC_EN : 0)); 393 if (status) 394 return status; 395 396 if (read_write == I2C_SMBUS_READ) { 397 len = inb_p(SMBHSTDAT0(priv)); 398 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) 399 return -EPROTO; 400 401 data->block[0] = len; 402 for (i = 0; i < len; i++) 403 data->block[i + 1] = inb_p(SMBBLKDAT(priv)); 404 } 405 return 0; 406 } 407 408 static void i801_isr_byte_done(struct i801_priv *priv) 409 { 410 if (priv->is_read) { 411 /* For SMBus block reads, length is received with first byte */ 412 if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) && 413 (priv->count == 0)) { 414 priv->len = inb_p(SMBHSTDAT0(priv)); 415 if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) { 416 dev_err(&priv->pci_dev->dev, 417 "Illegal SMBus block read size %d\n", 418 priv->len); 419 /* FIXME: Recover */ 420 priv->len = I2C_SMBUS_BLOCK_MAX; 421 } else { 422 dev_dbg(&priv->pci_dev->dev, 423 "SMBus block read size is %d\n", 424 priv->len); 425 } 426 priv->data[-1] = priv->len; 427 } 428 429 /* Read next byte */ 430 if (priv->count < priv->len) 431 priv->data[priv->count++] = inb(SMBBLKDAT(priv)); 432 else 433 dev_dbg(&priv->pci_dev->dev, 434 "Discarding extra byte on block read\n"); 435 436 /* Set LAST_BYTE for last byte of read transaction */ 437 if (priv->count == priv->len - 1) 438 outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE, 439 SMBHSTCNT(priv)); 440 } else if (priv->count < priv->len - 1) { 441 /* Write next byte, except for IRQ after last byte */ 442 outb_p(priv->data[++priv->count], SMBBLKDAT(priv)); 443 } 444 445 /* Clear BYTE_DONE to continue with next byte */ 446 outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); 447 } 448 449 /* 450 * There are two kinds of interrupts: 451 * 452 * 1) i801 signals transaction completion with one of these interrupts: 453 * INTR - Success 454 * DEV_ERR - Invalid command, NAK or communication timeout 455 * BUS_ERR - SMI# transaction collision 456 * FAILED - transaction was canceled due to a KILL request 457 * When any of these occur, update ->status and wake up the waitq. 458 * ->status must be cleared before kicking off the next transaction. 459 * 460 * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt 461 * occurs for each byte of a byte-by-byte to prepare the next byte. 462 */ 463 static irqreturn_t i801_isr(int irq, void *dev_id) 464 { 465 struct i801_priv *priv = dev_id; 466 u16 pcists; 467 u8 status; 468 469 /* Confirm this is our interrupt */ 470 pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists); 471 if (!(pcists & SMBPCISTS_INTS)) 472 return IRQ_NONE; 473 474 status = inb_p(SMBHSTSTS(priv)); 475 if (status != 0x42) 476 dev_dbg(&priv->pci_dev->dev, "irq: status = %02x\n", status); 477 478 if (status & SMBHSTSTS_BYTE_DONE) 479 i801_isr_byte_done(priv); 480 481 /* 482 * Clear irq sources and report transaction result. 483 * ->status must be cleared before the next transaction is started. 484 */ 485 status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS; 486 if (status) { 487 outb_p(status, SMBHSTSTS(priv)); 488 priv->status |= status; 489 wake_up(&priv->waitq); 490 } 491 492 return IRQ_HANDLED; 493 } 494 495 /* 496 * For "byte-by-byte" block transactions: 497 * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1 498 * I2C read uses cmd=I801_I2C_BLOCK_DATA 499 */ 500 static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, 501 union i2c_smbus_data *data, 502 char read_write, int command, 503 int hwpec) 504 { 505 int i, len; 506 int smbcmd; 507 int status; 508 int result; 509 510 result = i801_check_pre(priv); 511 if (result < 0) 512 return result; 513 514 len = data->block[0]; 515 516 if (read_write == I2C_SMBUS_WRITE) { 517 outb_p(len, SMBHSTDAT0(priv)); 518 outb_p(data->block[1], SMBBLKDAT(priv)); 519 } 520 521 if (command == I2C_SMBUS_I2C_BLOCK_DATA && 522 read_write == I2C_SMBUS_READ) 523 smbcmd = I801_I2C_BLOCK_DATA; 524 else 525 smbcmd = I801_BLOCK_DATA; 526 527 if (priv->features & FEATURE_IRQ) { 528 priv->is_read = (read_write == I2C_SMBUS_READ); 529 if (len == 1 && priv->is_read) 530 smbcmd |= SMBHSTCNT_LAST_BYTE; 531 priv->cmd = smbcmd | SMBHSTCNT_INTREN; 532 priv->len = len; 533 priv->count = 0; 534 priv->data = &data->block[1]; 535 536 outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv)); 537 wait_event(priv->waitq, (status = priv->status)); 538 priv->status = 0; 539 return i801_check_post(priv, status); 540 } 541 542 for (i = 1; i <= len; i++) { 543 if (i == len && read_write == I2C_SMBUS_READ) 544 smbcmd |= SMBHSTCNT_LAST_BYTE; 545 outb_p(smbcmd, SMBHSTCNT(priv)); 546 547 if (i == 1) 548 outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START, 549 SMBHSTCNT(priv)); 550 551 status = i801_wait_byte_done(priv); 552 if (status) 553 goto exit; 554 555 if (i == 1 && read_write == I2C_SMBUS_READ 556 && command != I2C_SMBUS_I2C_BLOCK_DATA) { 557 len = inb_p(SMBHSTDAT0(priv)); 558 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { 559 dev_err(&priv->pci_dev->dev, 560 "Illegal SMBus block read size %d\n", 561 len); 562 /* Recover */ 563 while (inb_p(SMBHSTSTS(priv)) & 564 SMBHSTSTS_HOST_BUSY) 565 outb_p(SMBHSTSTS_BYTE_DONE, 566 SMBHSTSTS(priv)); 567 outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv)); 568 return -EPROTO; 569 } 570 data->block[0] = len; 571 } 572 573 /* Retrieve/store value in SMBBLKDAT */ 574 if (read_write == I2C_SMBUS_READ) 575 data->block[i] = inb_p(SMBBLKDAT(priv)); 576 if (read_write == I2C_SMBUS_WRITE && i+1 <= len) 577 outb_p(data->block[i+1], SMBBLKDAT(priv)); 578 579 /* signals SMBBLKDAT ready */ 580 outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); 581 } 582 583 status = i801_wait_intr(priv); 584 exit: 585 return i801_check_post(priv, status); 586 } 587 588 static int i801_set_block_buffer_mode(struct i801_priv *priv) 589 { 590 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv)); 591 if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0) 592 return -EIO; 593 return 0; 594 } 595 596 /* Block transaction function */ 597 static int i801_block_transaction(struct i801_priv *priv, 598 union i2c_smbus_data *data, char read_write, 599 int command, int hwpec) 600 { 601 int result = 0; 602 unsigned char hostc; 603 604 if (command == I2C_SMBUS_I2C_BLOCK_DATA) { 605 if (read_write == I2C_SMBUS_WRITE) { 606 /* set I2C_EN bit in configuration register */ 607 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc); 608 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, 609 hostc | SMBHSTCFG_I2C_EN); 610 } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) { 611 dev_err(&priv->pci_dev->dev, 612 "I2C block read is unsupported!\n"); 613 return -EOPNOTSUPP; 614 } 615 } 616 617 if (read_write == I2C_SMBUS_WRITE 618 || command == I2C_SMBUS_I2C_BLOCK_DATA) { 619 if (data->block[0] < 1) 620 data->block[0] = 1; 621 if (data->block[0] > I2C_SMBUS_BLOCK_MAX) 622 data->block[0] = I2C_SMBUS_BLOCK_MAX; 623 } else { 624 data->block[0] = 32; /* max for SMBus block reads */ 625 } 626 627 /* Experience has shown that the block buffer can only be used for 628 SMBus (not I2C) block transactions, even though the datasheet 629 doesn't mention this limitation. */ 630 if ((priv->features & FEATURE_BLOCK_BUFFER) 631 && command != I2C_SMBUS_I2C_BLOCK_DATA 632 && i801_set_block_buffer_mode(priv) == 0) 633 result = i801_block_transaction_by_block(priv, data, 634 read_write, hwpec); 635 else 636 result = i801_block_transaction_byte_by_byte(priv, data, 637 read_write, 638 command, hwpec); 639 640 if (command == I2C_SMBUS_I2C_BLOCK_DATA 641 && read_write == I2C_SMBUS_WRITE) { 642 /* restore saved configuration register value */ 643 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc); 644 } 645 return result; 646 } 647 648 /* Return negative errno on error. */ 649 static s32 i801_access(struct i2c_adapter *adap, u16 addr, 650 unsigned short flags, char read_write, u8 command, 651 int size, union i2c_smbus_data *data) 652 { 653 int hwpec; 654 int block = 0; 655 int ret, xact = 0; 656 struct i801_priv *priv = i2c_get_adapdata(adap); 657 658 hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) 659 && size != I2C_SMBUS_QUICK 660 && size != I2C_SMBUS_I2C_BLOCK_DATA; 661 662 switch (size) { 663 case I2C_SMBUS_QUICK: 664 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 665 SMBHSTADD(priv)); 666 xact = I801_QUICK; 667 break; 668 case I2C_SMBUS_BYTE: 669 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 670 SMBHSTADD(priv)); 671 if (read_write == I2C_SMBUS_WRITE) 672 outb_p(command, SMBHSTCMD(priv)); 673 xact = I801_BYTE; 674 break; 675 case I2C_SMBUS_BYTE_DATA: 676 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 677 SMBHSTADD(priv)); 678 outb_p(command, SMBHSTCMD(priv)); 679 if (read_write == I2C_SMBUS_WRITE) 680 outb_p(data->byte, SMBHSTDAT0(priv)); 681 xact = I801_BYTE_DATA; 682 break; 683 case I2C_SMBUS_WORD_DATA: 684 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 685 SMBHSTADD(priv)); 686 outb_p(command, SMBHSTCMD(priv)); 687 if (read_write == I2C_SMBUS_WRITE) { 688 outb_p(data->word & 0xff, SMBHSTDAT0(priv)); 689 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); 690 } 691 xact = I801_WORD_DATA; 692 break; 693 case I2C_SMBUS_BLOCK_DATA: 694 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), 695 SMBHSTADD(priv)); 696 outb_p(command, SMBHSTCMD(priv)); 697 block = 1; 698 break; 699 case I2C_SMBUS_I2C_BLOCK_DATA: 700 /* NB: page 240 of ICH5 datasheet shows that the R/#W 701 * bit should be cleared here, even when reading */ 702 outb_p((addr & 0x7f) << 1, SMBHSTADD(priv)); 703 if (read_write == I2C_SMBUS_READ) { 704 /* NB: page 240 of ICH5 datasheet also shows 705 * that DATA1 is the cmd field when reading */ 706 outb_p(command, SMBHSTDAT1(priv)); 707 } else 708 outb_p(command, SMBHSTCMD(priv)); 709 block = 1; 710 break; 711 default: 712 dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n", 713 size); 714 return -EOPNOTSUPP; 715 } 716 717 if (hwpec) /* enable/disable hardware PEC */ 718 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv)); 719 else 720 outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), 721 SMBAUXCTL(priv)); 722 723 if (block) 724 ret = i801_block_transaction(priv, data, read_write, size, 725 hwpec); 726 else 727 ret = i801_transaction(priv, xact); 728 729 /* Some BIOSes don't like it when PEC is enabled at reboot or resume 730 time, so we forcibly disable it after every transaction. Turn off 731 E32B for the same reason. */ 732 if (hwpec || block) 733 outb_p(inb_p(SMBAUXCTL(priv)) & 734 ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); 735 736 if (block) 737 return ret; 738 if (ret) 739 return ret; 740 if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) 741 return 0; 742 743 switch (xact & 0x7f) { 744 case I801_BYTE: /* Result put in SMBHSTDAT0 */ 745 case I801_BYTE_DATA: 746 data->byte = inb_p(SMBHSTDAT0(priv)); 747 break; 748 case I801_WORD_DATA: 749 data->word = inb_p(SMBHSTDAT0(priv)) + 750 (inb_p(SMBHSTDAT1(priv)) << 8); 751 break; 752 } 753 return 0; 754 } 755 756 757 static u32 i801_func(struct i2c_adapter *adapter) 758 { 759 struct i801_priv *priv = i2c_get_adapdata(adapter); 760 761 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | 762 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | 763 I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | 764 ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | 765 ((priv->features & FEATURE_I2C_BLOCK_READ) ? 766 I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0); 767 } 768 769 static const struct i2c_algorithm smbus_algorithm = { 770 .smbus_xfer = i801_access, 771 .functionality = i801_func, 772 }; 773 774 static DEFINE_PCI_DEVICE_TABLE(i801_ids) = { 775 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) }, 776 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) }, 777 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) }, 778 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) }, 779 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) }, 780 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) }, 781 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) }, 782 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) }, 783 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) }, 784 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) }, 785 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) }, 786 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) }, 787 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EP80579_1) }, 788 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, 789 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, 790 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS) }, 791 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) }, 792 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS) }, 793 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) }, 794 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) }, 795 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) }, 796 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) }, 797 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) }, 798 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) }, 799 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) }, 800 { 0, } 801 }; 802 803 MODULE_DEVICE_TABLE(pci, i801_ids); 804 805 #if defined CONFIG_X86 && defined CONFIG_DMI 806 static unsigned char apanel_addr; 807 808 /* Scan the system ROM for the signature "FJKEYINF" */ 809 static __init const void __iomem *bios_signature(const void __iomem *bios) 810 { 811 ssize_t offset; 812 const unsigned char signature[] = "FJKEYINF"; 813 814 for (offset = 0; offset < 0x10000; offset += 0x10) { 815 if (check_signature(bios + offset, signature, 816 sizeof(signature)-1)) 817 return bios + offset; 818 } 819 return NULL; 820 } 821 822 static void __init input_apanel_init(void) 823 { 824 void __iomem *bios; 825 const void __iomem *p; 826 827 bios = ioremap(0xF0000, 0x10000); /* Can't fail */ 828 p = bios_signature(bios); 829 if (p) { 830 /* just use the first address */ 831 apanel_addr = readb(p + 8 + 3) >> 1; 832 } 833 iounmap(bios); 834 } 835 836 struct dmi_onboard_device_info { 837 const char *name; 838 u8 type; 839 unsigned short i2c_addr; 840 const char *i2c_type; 841 }; 842 843 static struct dmi_onboard_device_info __devinitdata dmi_devices[] = { 844 { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" }, 845 { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" }, 846 { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" }, 847 }; 848 849 static void __devinit dmi_check_onboard_device(u8 type, const char *name, 850 struct i2c_adapter *adap) 851 { 852 int i; 853 struct i2c_board_info info; 854 855 for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) { 856 /* & ~0x80, ignore enabled/disabled bit */ 857 if ((type & ~0x80) != dmi_devices[i].type) 858 continue; 859 if (strcasecmp(name, dmi_devices[i].name)) 860 continue; 861 862 memset(&info, 0, sizeof(struct i2c_board_info)); 863 info.addr = dmi_devices[i].i2c_addr; 864 strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE); 865 i2c_new_device(adap, &info); 866 break; 867 } 868 } 869 870 /* We use our own function to check for onboard devices instead of 871 dmi_find_device() as some buggy BIOS's have the devices we are interested 872 in marked as disabled */ 873 static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm, 874 void *adap) 875 { 876 int i, count; 877 878 if (dm->type != 10) 879 return; 880 881 count = (dm->length - sizeof(struct dmi_header)) / 2; 882 for (i = 0; i < count; i++) { 883 const u8 *d = (char *)(dm + 1) + (i * 2); 884 const char *name = ((char *) dm) + dm->length; 885 u8 type = d[0]; 886 u8 s = d[1]; 887 888 if (!s) 889 continue; 890 s--; 891 while (s > 0 && name[0]) { 892 name += strlen(name) + 1; 893 s--; 894 } 895 if (name[0] == 0) /* Bogus string reference */ 896 continue; 897 898 dmi_check_onboard_device(type, name, adap); 899 } 900 } 901 902 /* Register optional slaves */ 903 static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) 904 { 905 /* Only register slaves on main SMBus channel */ 906 if (priv->features & FEATURE_IDF) 907 return; 908 909 if (apanel_addr) { 910 struct i2c_board_info info; 911 912 memset(&info, 0, sizeof(struct i2c_board_info)); 913 info.addr = apanel_addr; 914 strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE); 915 i2c_new_device(&priv->adapter, &info); 916 } 917 918 if (dmi_name_in_vendors("FUJITSU")) 919 dmi_walk(dmi_check_onboard_devices, &priv->adapter); 920 } 921 #else 922 static void __init input_apanel_init(void) {} 923 static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {} 924 #endif /* CONFIG_X86 && CONFIG_DMI */ 925 926 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ 927 defined CONFIG_DMI 928 static struct i801_mux_config i801_mux_config_asus_z8_d12 = { 929 .gpio_chip = "gpio_ich", 930 .values = { 0x02, 0x03 }, 931 .n_values = 2, 932 .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD }, 933 .gpios = { 52, 53 }, 934 .n_gpios = 2, 935 }; 936 937 static struct i801_mux_config i801_mux_config_asus_z8_d18 = { 938 .gpio_chip = "gpio_ich", 939 .values = { 0x02, 0x03, 0x01 }, 940 .n_values = 3, 941 .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD }, 942 .gpios = { 52, 53 }, 943 .n_gpios = 2, 944 }; 945 946 static struct dmi_system_id __devinitdata mux_dmi_table[] = { 947 { 948 .matches = { 949 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 950 DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"), 951 }, 952 .driver_data = &i801_mux_config_asus_z8_d12, 953 }, 954 { 955 .matches = { 956 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 957 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"), 958 }, 959 .driver_data = &i801_mux_config_asus_z8_d12, 960 }, 961 { 962 .matches = { 963 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 964 DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"), 965 }, 966 .driver_data = &i801_mux_config_asus_z8_d12, 967 }, 968 { 969 .matches = { 970 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 971 DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"), 972 }, 973 .driver_data = &i801_mux_config_asus_z8_d12, 974 }, 975 { 976 .matches = { 977 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 978 DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"), 979 }, 980 .driver_data = &i801_mux_config_asus_z8_d12, 981 }, 982 { 983 .matches = { 984 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 985 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"), 986 }, 987 .driver_data = &i801_mux_config_asus_z8_d12, 988 }, 989 { 990 .matches = { 991 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 992 DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"), 993 }, 994 .driver_data = &i801_mux_config_asus_z8_d18, 995 }, 996 { 997 .matches = { 998 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 999 DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"), 1000 }, 1001 .driver_data = &i801_mux_config_asus_z8_d18, 1002 }, 1003 { 1004 .matches = { 1005 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 1006 DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"), 1007 }, 1008 .driver_data = &i801_mux_config_asus_z8_d12, 1009 }, 1010 { } 1011 }; 1012 1013 /* Setup multiplexing if needed */ 1014 static int __devinit i801_add_mux(struct i801_priv *priv) 1015 { 1016 struct device *dev = &priv->adapter.dev; 1017 const struct i801_mux_config *mux_config; 1018 struct i2c_mux_gpio_platform_data gpio_data; 1019 int err; 1020 1021 if (!priv->mux_drvdata) 1022 return 0; 1023 mux_config = priv->mux_drvdata; 1024 1025 /* Prepare the platform data */ 1026 memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data)); 1027 gpio_data.parent = priv->adapter.nr; 1028 gpio_data.values = mux_config->values; 1029 gpio_data.n_values = mux_config->n_values; 1030 gpio_data.classes = mux_config->classes; 1031 gpio_data.gpio_chip = mux_config->gpio_chip; 1032 gpio_data.gpios = mux_config->gpios; 1033 gpio_data.n_gpios = mux_config->n_gpios; 1034 gpio_data.idle = I2C_MUX_GPIO_NO_IDLE; 1035 1036 /* Register the mux device */ 1037 priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio", 1038 PLATFORM_DEVID_AUTO, &gpio_data, 1039 sizeof(struct i2c_mux_gpio_platform_data)); 1040 if (IS_ERR(priv->mux_pdev)) { 1041 err = PTR_ERR(priv->mux_pdev); 1042 priv->mux_pdev = NULL; 1043 dev_err(dev, "Failed to register i2c-mux-gpio device\n"); 1044 return err; 1045 } 1046 1047 return 0; 1048 } 1049 1050 static void __devexit i801_del_mux(struct i801_priv *priv) 1051 { 1052 if (priv->mux_pdev) 1053 platform_device_unregister(priv->mux_pdev); 1054 } 1055 1056 static unsigned int __devinit i801_get_adapter_class(struct i801_priv *priv) 1057 { 1058 const struct dmi_system_id *id; 1059 const struct i801_mux_config *mux_config; 1060 unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD; 1061 int i; 1062 1063 id = dmi_first_match(mux_dmi_table); 1064 if (id) { 1065 /* Remove branch classes from trunk */ 1066 mux_config = id->driver_data; 1067 for (i = 0; i < mux_config->n_values; i++) 1068 class &= ~mux_config->classes[i]; 1069 1070 /* Remember for later */ 1071 priv->mux_drvdata = mux_config; 1072 } 1073 1074 return class; 1075 } 1076 #else 1077 static inline int i801_add_mux(struct i801_priv *priv) { return 0; } 1078 static inline void i801_del_mux(struct i801_priv *priv) { } 1079 1080 static inline unsigned int i801_get_adapter_class(struct i801_priv *priv) 1081 { 1082 return I2C_CLASS_HWMON | I2C_CLASS_SPD; 1083 } 1084 #endif 1085 1086 static int __devinit i801_probe(struct pci_dev *dev, 1087 const struct pci_device_id *id) 1088 { 1089 unsigned char temp; 1090 int err, i; 1091 struct i801_priv *priv; 1092 1093 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 1094 if (!priv) 1095 return -ENOMEM; 1096 1097 i2c_set_adapdata(&priv->adapter, priv); 1098 priv->adapter.owner = THIS_MODULE; 1099 priv->adapter.class = i801_get_adapter_class(priv); 1100 priv->adapter.algo = &smbus_algorithm; 1101 1102 priv->pci_dev = dev; 1103 switch (dev->device) { 1104 case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0: 1105 case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1: 1106 case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2: 1107 priv->features |= FEATURE_IDF; 1108 /* fall through */ 1109 default: 1110 priv->features |= FEATURE_I2C_BLOCK_READ; 1111 /* fall through */ 1112 case PCI_DEVICE_ID_INTEL_82801DB_3: 1113 priv->features |= FEATURE_SMBUS_PEC; 1114 priv->features |= FEATURE_BLOCK_BUFFER; 1115 /* fall through */ 1116 case PCI_DEVICE_ID_INTEL_82801CA_3: 1117 case PCI_DEVICE_ID_INTEL_82801BA_2: 1118 case PCI_DEVICE_ID_INTEL_82801AB_3: 1119 case PCI_DEVICE_ID_INTEL_82801AA_3: 1120 break; 1121 } 1122 1123 /* IRQ processing tested on CougarPoint PCH, ICH5, ICH7-M and ICH10 */ 1124 if (dev->device == PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS || 1125 dev->device == PCI_DEVICE_ID_INTEL_82801EB_3 || 1126 dev->device == PCI_DEVICE_ID_INTEL_ICH7_17 || 1127 dev->device == PCI_DEVICE_ID_INTEL_ICH8_5 || 1128 dev->device == PCI_DEVICE_ID_INTEL_ICH9_6 || 1129 dev->device == PCI_DEVICE_ID_INTEL_ICH10_4 || 1130 dev->device == PCI_DEVICE_ID_INTEL_ICH10_5) 1131 priv->features |= FEATURE_IRQ; 1132 1133 /* Disable features on user request */ 1134 for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) { 1135 if (priv->features & disable_features & (1 << i)) 1136 dev_notice(&dev->dev, "%s disabled by user\n", 1137 i801_feature_names[i]); 1138 } 1139 priv->features &= ~disable_features; 1140 1141 err = pci_enable_device(dev); 1142 if (err) { 1143 dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n", 1144 err); 1145 goto exit; 1146 } 1147 1148 /* Determine the address of the SMBus area */ 1149 priv->smba = pci_resource_start(dev, SMBBAR); 1150 if (!priv->smba) { 1151 dev_err(&dev->dev, "SMBus base address uninitialized, " 1152 "upgrade BIOS\n"); 1153 err = -ENODEV; 1154 goto exit; 1155 } 1156 1157 err = acpi_check_resource_conflict(&dev->resource[SMBBAR]); 1158 if (err) { 1159 err = -ENODEV; 1160 goto exit; 1161 } 1162 1163 err = pci_request_region(dev, SMBBAR, i801_driver.name); 1164 if (err) { 1165 dev_err(&dev->dev, "Failed to request SMBus region " 1166 "0x%lx-0x%Lx\n", priv->smba, 1167 (unsigned long long)pci_resource_end(dev, SMBBAR)); 1168 goto exit; 1169 } 1170 1171 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp); 1172 priv->original_hstcfg = temp; 1173 temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */ 1174 if (!(temp & SMBHSTCFG_HST_EN)) { 1175 dev_info(&dev->dev, "Enabling SMBus device\n"); 1176 temp |= SMBHSTCFG_HST_EN; 1177 } 1178 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp); 1179 1180 if (temp & SMBHSTCFG_SMB_SMI_EN) { 1181 dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n"); 1182 /* Disable SMBus interrupt feature if SMBus using SMI# */ 1183 priv->features &= ~FEATURE_IRQ; 1184 } 1185 1186 /* Clear special mode bits */ 1187 if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) 1188 outb_p(inb_p(SMBAUXCTL(priv)) & 1189 ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); 1190 1191 if (priv->features & FEATURE_IRQ) { 1192 init_waitqueue_head(&priv->waitq); 1193 1194 err = request_irq(dev->irq, i801_isr, IRQF_SHARED, 1195 i801_driver.name, priv); 1196 if (err) { 1197 dev_err(&dev->dev, "Failed to allocate irq %d: %d\n", 1198 dev->irq, err); 1199 goto exit_release; 1200 } 1201 dev_info(&dev->dev, "SMBus using PCI Interrupt\n"); 1202 } 1203 1204 /* set up the sysfs linkage to our parent device */ 1205 priv->adapter.dev.parent = &dev->dev; 1206 1207 /* Retry up to 3 times on lost arbitration */ 1208 priv->adapter.retries = 3; 1209 1210 snprintf(priv->adapter.name, sizeof(priv->adapter.name), 1211 "SMBus I801 adapter at %04lx", priv->smba); 1212 err = i2c_add_adapter(&priv->adapter); 1213 if (err) { 1214 dev_err(&dev->dev, "Failed to add SMBus adapter\n"); 1215 goto exit_free_irq; 1216 } 1217 1218 i801_probe_optional_slaves(priv); 1219 /* We ignore errors - multiplexing is optional */ 1220 i801_add_mux(priv); 1221 1222 pci_set_drvdata(dev, priv); 1223 1224 return 0; 1225 1226 exit_free_irq: 1227 if (priv->features & FEATURE_IRQ) 1228 free_irq(dev->irq, priv); 1229 exit_release: 1230 pci_release_region(dev, SMBBAR); 1231 exit: 1232 kfree(priv); 1233 return err; 1234 } 1235 1236 static void __devexit i801_remove(struct pci_dev *dev) 1237 { 1238 struct i801_priv *priv = pci_get_drvdata(dev); 1239 1240 i801_del_mux(priv); 1241 i2c_del_adapter(&priv->adapter); 1242 pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); 1243 1244 if (priv->features & FEATURE_IRQ) 1245 free_irq(dev->irq, priv); 1246 pci_release_region(dev, SMBBAR); 1247 1248 pci_set_drvdata(dev, NULL); 1249 kfree(priv); 1250 /* 1251 * do not call pci_disable_device(dev) since it can cause hard hangs on 1252 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010) 1253 */ 1254 } 1255 1256 #ifdef CONFIG_PM 1257 static int i801_suspend(struct pci_dev *dev, pm_message_t mesg) 1258 { 1259 struct i801_priv *priv = pci_get_drvdata(dev); 1260 1261 pci_save_state(dev); 1262 pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); 1263 pci_set_power_state(dev, pci_choose_state(dev, mesg)); 1264 return 0; 1265 } 1266 1267 static int i801_resume(struct pci_dev *dev) 1268 { 1269 pci_set_power_state(dev, PCI_D0); 1270 pci_restore_state(dev); 1271 return pci_enable_device(dev); 1272 } 1273 #else 1274 #define i801_suspend NULL 1275 #define i801_resume NULL 1276 #endif 1277 1278 static struct pci_driver i801_driver = { 1279 .name = "i801_smbus", 1280 .id_table = i801_ids, 1281 .probe = i801_probe, 1282 .remove = __devexit_p(i801_remove), 1283 .suspend = i801_suspend, 1284 .resume = i801_resume, 1285 }; 1286 1287 static int __init i2c_i801_init(void) 1288 { 1289 if (dmi_name_in_vendors("FUJITSU")) 1290 input_apanel_init(); 1291 return pci_register_driver(&i801_driver); 1292 } 1293 1294 static void __exit i2c_i801_exit(void) 1295 { 1296 pci_unregister_driver(&i801_driver); 1297 } 1298 1299 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, " 1300 "Jean Delvare <khali@linux-fr.org>"); 1301 MODULE_DESCRIPTION("I801 SMBus driver"); 1302 MODULE_LICENSE("GPL"); 1303 1304 module_init(i2c_i801_init); 1305 module_exit(i2c_i801_exit); 1306