1 /* 2 * Driver for the Diolan u2c-12 USB-I2C adapter 3 * 4 * Copyright (c) 2010-2011 Ericsson AB 5 * 6 * Derived from: 7 * i2c-tiny-usb.c 8 * Copyright (C) 2006-2007 Till Harbaum (Till@Harbaum.org) 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation, version 2. 13 */ 14 15 #include <linux/kernel.h> 16 #include <linux/errno.h> 17 #include <linux/module.h> 18 #include <linux/types.h> 19 #include <linux/slab.h> 20 #include <linux/usb.h> 21 #include <linux/i2c.h> 22 23 #define DRIVER_NAME "i2c-diolan-u2c" 24 25 #define USB_VENDOR_ID_DIOLAN 0x0abf 26 #define USB_DEVICE_ID_DIOLAN_U2C 0x3370 27 28 29 /* commands via USB, must match command ids in the firmware */ 30 #define CMD_I2C_READ 0x01 31 #define CMD_I2C_WRITE 0x02 32 #define CMD_I2C_SCAN 0x03 /* Returns list of detected devices */ 33 #define CMD_I2C_RELEASE_SDA 0x04 34 #define CMD_I2C_RELEASE_SCL 0x05 35 #define CMD_I2C_DROP_SDA 0x06 36 #define CMD_I2C_DROP_SCL 0x07 37 #define CMD_I2C_READ_SDA 0x08 38 #define CMD_I2C_READ_SCL 0x09 39 #define CMD_GET_FW_VERSION 0x0a 40 #define CMD_GET_SERIAL 0x0b 41 #define CMD_I2C_START 0x0c 42 #define CMD_I2C_STOP 0x0d 43 #define CMD_I2C_REPEATED_START 0x0e 44 #define CMD_I2C_PUT_BYTE 0x0f 45 #define CMD_I2C_GET_BYTE 0x10 46 #define CMD_I2C_PUT_ACK 0x11 47 #define CMD_I2C_GET_ACK 0x12 48 #define CMD_I2C_PUT_BYTE_ACK 0x13 49 #define CMD_I2C_GET_BYTE_ACK 0x14 50 #define CMD_I2C_SET_SPEED 0x1b 51 #define CMD_I2C_GET_SPEED 0x1c 52 #define CMD_I2C_SET_CLK_SYNC 0x24 53 #define CMD_I2C_GET_CLK_SYNC 0x25 54 #define CMD_I2C_SET_CLK_SYNC_TO 0x26 55 #define CMD_I2C_GET_CLK_SYNC_TO 0x27 56 57 #define RESP_OK 0x00 58 #define RESP_FAILED 0x01 59 #define RESP_BAD_MEMADDR 0x04 60 #define RESP_DATA_ERR 0x05 61 #define RESP_NOT_IMPLEMENTED 0x06 62 #define RESP_NACK 0x07 63 #define RESP_TIMEOUT 0x09 64 65 #define U2C_I2C_SPEED_FAST 0 /* 400 kHz */ 66 #define U2C_I2C_SPEED_STD 1 /* 100 kHz */ 67 #define U2C_I2C_SPEED_2KHZ 242 /* 2 kHz, minimum speed */ 68 #define U2C_I2C_SPEED(f) ((DIV_ROUND_UP(1000000, (f)) - 10) / 2 + 1) 69 70 #define U2C_I2C_FREQ_FAST 400000 71 #define U2C_I2C_FREQ_STD 100000 72 #define U2C_I2C_FREQ(s) (1000000 / (2 * (s - 1) + 10)) 73 74 #define DIOLAN_USB_TIMEOUT 100 /* in ms */ 75 #define DIOLAN_SYNC_TIMEOUT 20 /* in ms */ 76 77 #define DIOLAN_OUTBUF_LEN 128 78 #define DIOLAN_FLUSH_LEN (DIOLAN_OUTBUF_LEN - 4) 79 #define DIOLAN_INBUF_LEN 256 /* Maximum supported receive length */ 80 81 /* Structure to hold all of our device specific stuff */ 82 struct i2c_diolan_u2c { 83 u8 obuffer[DIOLAN_OUTBUF_LEN]; /* output buffer */ 84 u8 ibuffer[DIOLAN_INBUF_LEN]; /* input buffer */ 85 int ep_in, ep_out; /* Endpoints */ 86 struct usb_device *usb_dev; /* the usb device for this device */ 87 struct usb_interface *interface;/* the interface for this device */ 88 struct i2c_adapter adapter; /* i2c related things */ 89 int olen; /* Output buffer length */ 90 int ocount; /* Number of enqueued messages */ 91 }; 92 93 static uint frequency = U2C_I2C_FREQ_STD; /* I2C clock frequency in Hz */ 94 95 module_param(frequency, uint, S_IRUGO | S_IWUSR); 96 MODULE_PARM_DESC(frequency, "I2C clock frequency in hertz"); 97 98 /* usb layer */ 99 100 /* Send command to device, and get response. */ 101 static int diolan_usb_transfer(struct i2c_diolan_u2c *dev) 102 { 103 int ret = 0; 104 int actual; 105 int i; 106 107 if (!dev->olen || !dev->ocount) 108 return -EINVAL; 109 110 ret = usb_bulk_msg(dev->usb_dev, 111 usb_sndbulkpipe(dev->usb_dev, dev->ep_out), 112 dev->obuffer, dev->olen, &actual, 113 DIOLAN_USB_TIMEOUT); 114 if (!ret) { 115 for (i = 0; i < dev->ocount; i++) { 116 int tmpret; 117 118 tmpret = usb_bulk_msg(dev->usb_dev, 119 usb_rcvbulkpipe(dev->usb_dev, 120 dev->ep_in), 121 dev->ibuffer, 122 sizeof(dev->ibuffer), &actual, 123 DIOLAN_USB_TIMEOUT); 124 /* 125 * Stop command processing if a previous command 126 * returned an error. 127 * Note that we still need to retrieve all messages. 128 */ 129 if (ret < 0) 130 continue; 131 ret = tmpret; 132 if (ret == 0 && actual > 0) { 133 switch (dev->ibuffer[actual - 1]) { 134 case RESP_NACK: 135 /* 136 * Return ENXIO if NACK was received as 137 * response to the address phase, 138 * EIO otherwise 139 */ 140 ret = i == 1 ? -ENXIO : -EIO; 141 break; 142 case RESP_TIMEOUT: 143 ret = -ETIMEDOUT; 144 break; 145 case RESP_OK: 146 /* strip off return code */ 147 ret = actual - 1; 148 break; 149 default: 150 ret = -EIO; 151 break; 152 } 153 } 154 } 155 } 156 dev->olen = 0; 157 dev->ocount = 0; 158 return ret; 159 } 160 161 static int diolan_write_cmd(struct i2c_diolan_u2c *dev, bool flush) 162 { 163 if (flush || dev->olen >= DIOLAN_FLUSH_LEN) 164 return diolan_usb_transfer(dev); 165 return 0; 166 } 167 168 /* Send command (no data) */ 169 static int diolan_usb_cmd(struct i2c_diolan_u2c *dev, u8 command, bool flush) 170 { 171 dev->obuffer[dev->olen++] = command; 172 dev->ocount++; 173 return diolan_write_cmd(dev, flush); 174 } 175 176 /* Send command with one byte of data */ 177 static int diolan_usb_cmd_data(struct i2c_diolan_u2c *dev, u8 command, u8 data, 178 bool flush) 179 { 180 dev->obuffer[dev->olen++] = command; 181 dev->obuffer[dev->olen++] = data; 182 dev->ocount++; 183 return diolan_write_cmd(dev, flush); 184 } 185 186 /* Send command with two bytes of data */ 187 static int diolan_usb_cmd_data2(struct i2c_diolan_u2c *dev, u8 command, u8 d1, 188 u8 d2, bool flush) 189 { 190 dev->obuffer[dev->olen++] = command; 191 dev->obuffer[dev->olen++] = d1; 192 dev->obuffer[dev->olen++] = d2; 193 dev->ocount++; 194 return diolan_write_cmd(dev, flush); 195 } 196 197 /* 198 * Flush input queue. 199 * If we don't do this at startup and the controller has queued up 200 * messages which were not retrieved, it will stop responding 201 * at some point. 202 */ 203 static void diolan_flush_input(struct i2c_diolan_u2c *dev) 204 { 205 int i; 206 207 for (i = 0; i < 10; i++) { 208 int actual = 0; 209 int ret; 210 211 ret = usb_bulk_msg(dev->usb_dev, 212 usb_rcvbulkpipe(dev->usb_dev, dev->ep_in), 213 dev->ibuffer, sizeof(dev->ibuffer), &actual, 214 DIOLAN_USB_TIMEOUT); 215 if (ret < 0 || actual == 0) 216 break; 217 } 218 if (i == 10) 219 dev_err(&dev->interface->dev, "Failed to flush input buffer\n"); 220 } 221 222 static int diolan_i2c_start(struct i2c_diolan_u2c *dev) 223 { 224 return diolan_usb_cmd(dev, CMD_I2C_START, false); 225 } 226 227 static int diolan_i2c_repeated_start(struct i2c_diolan_u2c *dev) 228 { 229 return diolan_usb_cmd(dev, CMD_I2C_REPEATED_START, false); 230 } 231 232 static int diolan_i2c_stop(struct i2c_diolan_u2c *dev) 233 { 234 return diolan_usb_cmd(dev, CMD_I2C_STOP, true); 235 } 236 237 static int diolan_i2c_get_byte_ack(struct i2c_diolan_u2c *dev, bool ack, 238 u8 *byte) 239 { 240 int ret; 241 242 ret = diolan_usb_cmd_data(dev, CMD_I2C_GET_BYTE_ACK, ack, true); 243 if (ret > 0) 244 *byte = dev->ibuffer[0]; 245 else if (ret == 0) 246 ret = -EIO; 247 248 return ret; 249 } 250 251 static int diolan_i2c_put_byte_ack(struct i2c_diolan_u2c *dev, u8 byte) 252 { 253 return diolan_usb_cmd_data(dev, CMD_I2C_PUT_BYTE_ACK, byte, false); 254 } 255 256 static int diolan_set_speed(struct i2c_diolan_u2c *dev, u8 speed) 257 { 258 return diolan_usb_cmd_data(dev, CMD_I2C_SET_SPEED, speed, true); 259 } 260 261 /* Enable or disable clock synchronization (stretching) */ 262 static int diolan_set_clock_synch(struct i2c_diolan_u2c *dev, bool enable) 263 { 264 return diolan_usb_cmd_data(dev, CMD_I2C_SET_CLK_SYNC, enable, true); 265 } 266 267 /* Set clock synchronization timeout in ms */ 268 static int diolan_set_clock_synch_timeout(struct i2c_diolan_u2c *dev, int ms) 269 { 270 int to_val = ms * 10; 271 272 return diolan_usb_cmd_data2(dev, CMD_I2C_SET_CLK_SYNC_TO, 273 to_val & 0xff, (to_val >> 8) & 0xff, true); 274 } 275 276 static void diolan_fw_version(struct i2c_diolan_u2c *dev) 277 { 278 int ret; 279 280 ret = diolan_usb_cmd(dev, CMD_GET_FW_VERSION, true); 281 if (ret >= 2) 282 dev_info(&dev->interface->dev, 283 "Diolan U2C firmware version %u.%u\n", 284 (unsigned int)dev->ibuffer[0], 285 (unsigned int)dev->ibuffer[1]); 286 } 287 288 static void diolan_get_serial(struct i2c_diolan_u2c *dev) 289 { 290 int ret; 291 u32 serial; 292 293 ret = diolan_usb_cmd(dev, CMD_GET_SERIAL, true); 294 if (ret >= 4) { 295 serial = le32_to_cpu(*(u32 *)dev->ibuffer); 296 dev_info(&dev->interface->dev, 297 "Diolan U2C serial number %u\n", serial); 298 } 299 } 300 301 static int diolan_init(struct i2c_diolan_u2c *dev) 302 { 303 int speed, ret; 304 305 if (frequency >= 200000) { 306 speed = U2C_I2C_SPEED_FAST; 307 frequency = U2C_I2C_FREQ_FAST; 308 } else if (frequency >= 100000 || frequency == 0) { 309 speed = U2C_I2C_SPEED_STD; 310 frequency = U2C_I2C_FREQ_STD; 311 } else { 312 speed = U2C_I2C_SPEED(frequency); 313 if (speed > U2C_I2C_SPEED_2KHZ) 314 speed = U2C_I2C_SPEED_2KHZ; 315 frequency = U2C_I2C_FREQ(speed); 316 } 317 318 dev_info(&dev->interface->dev, 319 "Diolan U2C at USB bus %03d address %03d speed %d Hz\n", 320 dev->usb_dev->bus->busnum, dev->usb_dev->devnum, frequency); 321 322 diolan_flush_input(dev); 323 diolan_fw_version(dev); 324 diolan_get_serial(dev); 325 326 /* Set I2C speed */ 327 ret = diolan_set_speed(dev, speed); 328 if (ret < 0) 329 return ret; 330 331 /* Configure I2C clock synchronization */ 332 ret = diolan_set_clock_synch(dev, speed != U2C_I2C_SPEED_FAST); 333 if (ret < 0) 334 return ret; 335 336 if (speed != U2C_I2C_SPEED_FAST) 337 ret = diolan_set_clock_synch_timeout(dev, DIOLAN_SYNC_TIMEOUT); 338 339 return ret; 340 } 341 342 /* i2c layer */ 343 344 static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, 345 int num) 346 { 347 struct i2c_diolan_u2c *dev = i2c_get_adapdata(adapter); 348 struct i2c_msg *pmsg; 349 int i, j; 350 int ret, sret; 351 352 ret = diolan_i2c_start(dev); 353 if (ret < 0) 354 return ret; 355 356 for (i = 0; i < num; i++) { 357 pmsg = &msgs[i]; 358 if (i) { 359 ret = diolan_i2c_repeated_start(dev); 360 if (ret < 0) 361 goto abort; 362 } 363 if (pmsg->flags & I2C_M_RD) { 364 ret = 365 diolan_i2c_put_byte_ack(dev, (pmsg->addr << 1) | 1); 366 if (ret < 0) 367 goto abort; 368 for (j = 0; j < pmsg->len; j++) { 369 u8 byte; 370 bool ack = j < pmsg->len - 1; 371 372 /* 373 * Don't send NACK if this is the first byte 374 * of a SMBUS_BLOCK message. 375 */ 376 if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN)) 377 ack = true; 378 379 ret = diolan_i2c_get_byte_ack(dev, ack, &byte); 380 if (ret < 0) 381 goto abort; 382 /* 383 * Adjust count if first received byte is length 384 */ 385 if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN)) { 386 if (byte == 0 387 || byte > I2C_SMBUS_BLOCK_MAX) { 388 ret = -EPROTO; 389 goto abort; 390 } 391 pmsg->len += byte; 392 } 393 pmsg->buf[j] = byte; 394 } 395 } else { 396 ret = diolan_i2c_put_byte_ack(dev, pmsg->addr << 1); 397 if (ret < 0) 398 goto abort; 399 for (j = 0; j < pmsg->len; j++) { 400 ret = diolan_i2c_put_byte_ack(dev, 401 pmsg->buf[j]); 402 if (ret < 0) 403 goto abort; 404 } 405 } 406 } 407 ret = num; 408 abort: 409 sret = diolan_i2c_stop(dev); 410 if (sret < 0 && ret >= 0) 411 ret = sret; 412 return ret; 413 } 414 415 /* 416 * Return list of supported functionality. 417 */ 418 static u32 diolan_usb_func(struct i2c_adapter *a) 419 { 420 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | 421 I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL; 422 } 423 424 static const struct i2c_algorithm diolan_usb_algorithm = { 425 .master_xfer = diolan_usb_xfer, 426 .functionality = diolan_usb_func, 427 }; 428 429 /* device layer */ 430 431 static const struct usb_device_id diolan_u2c_table[] = { 432 { USB_DEVICE(USB_VENDOR_ID_DIOLAN, USB_DEVICE_ID_DIOLAN_U2C) }, 433 { } 434 }; 435 436 MODULE_DEVICE_TABLE(usb, diolan_u2c_table); 437 438 static void diolan_u2c_free(struct i2c_diolan_u2c *dev) 439 { 440 usb_put_dev(dev->usb_dev); 441 kfree(dev); 442 } 443 444 static int diolan_u2c_probe(struct usb_interface *interface, 445 const struct usb_device_id *id) 446 { 447 struct usb_host_interface *hostif = interface->cur_altsetting; 448 struct i2c_diolan_u2c *dev; 449 int ret; 450 451 if (hostif->desc.bInterfaceNumber != 0 452 || hostif->desc.bNumEndpoints < 2) 453 return -ENODEV; 454 455 /* allocate memory for our device state and initialize it */ 456 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 457 if (dev == NULL) { 458 dev_err(&interface->dev, "no memory for device state\n"); 459 ret = -ENOMEM; 460 goto error; 461 } 462 dev->ep_out = hostif->endpoint[0].desc.bEndpointAddress; 463 dev->ep_in = hostif->endpoint[1].desc.bEndpointAddress; 464 465 dev->usb_dev = usb_get_dev(interface_to_usbdev(interface)); 466 dev->interface = interface; 467 468 /* save our data pointer in this interface device */ 469 usb_set_intfdata(interface, dev); 470 471 /* setup i2c adapter description */ 472 dev->adapter.owner = THIS_MODULE; 473 dev->adapter.class = I2C_CLASS_HWMON; 474 dev->adapter.algo = &diolan_usb_algorithm; 475 i2c_set_adapdata(&dev->adapter, dev); 476 snprintf(dev->adapter.name, sizeof(dev->adapter.name), 477 DRIVER_NAME " at bus %03d device %03d", 478 dev->usb_dev->bus->busnum, dev->usb_dev->devnum); 479 480 dev->adapter.dev.parent = &dev->interface->dev; 481 482 /* initialize diolan i2c interface */ 483 ret = diolan_init(dev); 484 if (ret < 0) { 485 dev_err(&interface->dev, "failed to initialize adapter\n"); 486 goto error_free; 487 } 488 489 /* and finally attach to i2c layer */ 490 ret = i2c_add_adapter(&dev->adapter); 491 if (ret < 0) { 492 dev_err(&interface->dev, "failed to add I2C adapter\n"); 493 goto error_free; 494 } 495 496 dev_dbg(&interface->dev, "connected " DRIVER_NAME "\n"); 497 498 return 0; 499 500 error_free: 501 usb_set_intfdata(interface, NULL); 502 diolan_u2c_free(dev); 503 error: 504 return ret; 505 } 506 507 static void diolan_u2c_disconnect(struct usb_interface *interface) 508 { 509 struct i2c_diolan_u2c *dev = usb_get_intfdata(interface); 510 511 i2c_del_adapter(&dev->adapter); 512 usb_set_intfdata(interface, NULL); 513 diolan_u2c_free(dev); 514 515 dev_dbg(&interface->dev, "disconnected\n"); 516 } 517 518 static struct usb_driver diolan_u2c_driver = { 519 .name = DRIVER_NAME, 520 .probe = diolan_u2c_probe, 521 .disconnect = diolan_u2c_disconnect, 522 .id_table = diolan_u2c_table, 523 }; 524 525 module_usb_driver(diolan_u2c_driver); 526 527 MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); 528 MODULE_DESCRIPTION(DRIVER_NAME " driver"); 529 MODULE_LICENSE("GPL"); 530