1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Synopsys DesignWare I2C adapter driver (master only). 4 * 5 * Based on the TI DAVINCI I2C adapter driver. 6 * 7 * Copyright (C) 2006 Texas Instruments. 8 * Copyright (C) 2007 MontaVista Software Inc. 9 * Copyright (C) 2009 Provigent Ltd. 10 * Copyright (C) 2011, 2015, 2016 Intel Corporation. 11 */ 12 #include <linux/acpi.h> 13 #include <linux/delay.h> 14 #include <linux/err.h> 15 #include <linux/errno.h> 16 #include <linux/i2c.h> 17 #include <linux/interrupt.h> 18 #include <linux/io.h> 19 #include <linux/kernel.h> 20 #include <linux/module.h> 21 #include <linux/pci.h> 22 #include <linux/pm_runtime.h> 23 #include <linux/power_supply.h> 24 #include <linux/sched.h> 25 #include <linux/slab.h> 26 27 #include "i2c-designware-core.h" 28 #include "i2c-ccgx-ucsi.h" 29 30 #define DRIVER_NAME "i2c-designware-pci" 31 32 enum dw_pci_ctl_id_t { 33 medfield, 34 merrifield, 35 baytrail, 36 cherrytrail, 37 haswell, 38 elkhartlake, 39 navi_amd, 40 }; 41 42 /* 43 * This is a legacy structure to describe the hardware counters 44 * to configure signal timings on the bus. For Device Tree platforms 45 * one should use the respective properties and for ACPI there is 46 * a set of ACPI methods that provide these counters. No new 47 * platform should use this structure. 48 */ 49 struct dw_scl_sda_cfg { 50 u16 ss_hcnt; 51 u16 fs_hcnt; 52 u16 ss_lcnt; 53 u16 fs_lcnt; 54 u32 sda_hold; 55 }; 56 57 struct dw_pci_controller { 58 u32 bus_num; 59 u32 flags; 60 struct dw_scl_sda_cfg *scl_sda_cfg; 61 int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c); 62 u32 (*get_clk_rate_khz)(struct dw_i2c_dev *dev); 63 }; 64 65 /* Merrifield HCNT/LCNT/SDA hold time */ 66 static struct dw_scl_sda_cfg mrfld_config = { 67 .ss_hcnt = 0x2f8, 68 .fs_hcnt = 0x87, 69 .ss_lcnt = 0x37b, 70 .fs_lcnt = 0x10a, 71 }; 72 73 /* BayTrail HCNT/LCNT/SDA hold time */ 74 static struct dw_scl_sda_cfg byt_config = { 75 .ss_hcnt = 0x200, 76 .fs_hcnt = 0x55, 77 .ss_lcnt = 0x200, 78 .fs_lcnt = 0x99, 79 .sda_hold = 0x6, 80 }; 81 82 /* Haswell HCNT/LCNT/SDA hold time */ 83 static struct dw_scl_sda_cfg hsw_config = { 84 .ss_hcnt = 0x01b0, 85 .fs_hcnt = 0x48, 86 .ss_lcnt = 0x01fb, 87 .fs_lcnt = 0xa0, 88 .sda_hold = 0x9, 89 }; 90 91 /* NAVI-AMD HCNT/LCNT/SDA hold time */ 92 static struct dw_scl_sda_cfg navi_amd_config = { 93 .ss_hcnt = 0x1ae, 94 .ss_lcnt = 0x23a, 95 .sda_hold = 0x9, 96 }; 97 98 static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev) 99 { 100 return 25000; 101 } 102 103 static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c) 104 { 105 struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev); 106 107 switch (pdev->device) { 108 case 0x0817: 109 dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ; 110 fallthrough; 111 case 0x0818: 112 case 0x0819: 113 c->bus_num = pdev->device - 0x817 + 3; 114 return 0; 115 case 0x082C: 116 case 0x082D: 117 case 0x082E: 118 c->bus_num = pdev->device - 0x82C + 0; 119 return 0; 120 } 121 return -ENODEV; 122 } 123 124 static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c) 125 { 126 /* 127 * On Intel Merrifield the user visible i2c buses are enumerated 128 * [1..7]. So, we add 1 to shift the default range. Besides that the 129 * first PCI slot provides 4 functions, that's why we have to add 0 to 130 * the first slot and 4 to the next one. 131 */ 132 switch (PCI_SLOT(pdev->devfn)) { 133 case 8: 134 c->bus_num = PCI_FUNC(pdev->devfn) + 0 + 1; 135 return 0; 136 case 9: 137 c->bus_num = PCI_FUNC(pdev->devfn) + 4 + 1; 138 return 0; 139 } 140 return -ENODEV; 141 } 142 143 static u32 ehl_get_clk_rate_khz(struct dw_i2c_dev *dev) 144 { 145 return 100000; 146 } 147 148 static u32 navi_amd_get_clk_rate_khz(struct dw_i2c_dev *dev) 149 { 150 return 100000; 151 } 152 153 static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c) 154 { 155 struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev); 156 157 dev->flags |= MODEL_AMD_NAVI_GPU; 158 dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ; 159 return 0; 160 } 161 162 static struct dw_pci_controller dw_pci_controllers[] = { 163 [medfield] = { 164 .bus_num = -1, 165 .setup = mfld_setup, 166 .get_clk_rate_khz = mfld_get_clk_rate_khz, 167 }, 168 [merrifield] = { 169 .bus_num = -1, 170 .scl_sda_cfg = &mrfld_config, 171 .setup = mrfld_setup, 172 }, 173 [baytrail] = { 174 .bus_num = -1, 175 .scl_sda_cfg = &byt_config, 176 }, 177 [haswell] = { 178 .bus_num = -1, 179 .scl_sda_cfg = &hsw_config, 180 }, 181 [cherrytrail] = { 182 .bus_num = -1, 183 .scl_sda_cfg = &byt_config, 184 }, 185 [elkhartlake] = { 186 .bus_num = -1, 187 .get_clk_rate_khz = ehl_get_clk_rate_khz, 188 }, 189 [navi_amd] = { 190 .bus_num = -1, 191 .scl_sda_cfg = &navi_amd_config, 192 .setup = navi_amd_setup, 193 .get_clk_rate_khz = navi_amd_get_clk_rate_khz, 194 }, 195 }; 196 197 static int __maybe_unused i2c_dw_pci_runtime_suspend(struct device *dev) 198 { 199 struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); 200 201 i_dev->disable(i_dev); 202 return 0; 203 } 204 205 static int __maybe_unused i2c_dw_pci_suspend(struct device *dev) 206 { 207 struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); 208 209 i2c_mark_adapter_suspended(&i_dev->adapter); 210 211 return i2c_dw_pci_runtime_suspend(dev); 212 } 213 214 static int __maybe_unused i2c_dw_pci_runtime_resume(struct device *dev) 215 { 216 struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); 217 218 return i_dev->init(i_dev); 219 } 220 221 static int __maybe_unused i2c_dw_pci_resume(struct device *dev) 222 { 223 struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); 224 int ret; 225 226 ret = i2c_dw_pci_runtime_resume(dev); 227 228 i2c_mark_adapter_resumed(&i_dev->adapter); 229 230 return ret; 231 } 232 233 static const struct dev_pm_ops i2c_dw_pm_ops = { 234 SET_SYSTEM_SLEEP_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume) 235 SET_RUNTIME_PM_OPS(i2c_dw_pci_runtime_suspend, i2c_dw_pci_runtime_resume, NULL) 236 }; 237 238 static const struct property_entry dgpu_properties[] = { 239 /* USB-C doesn't power the system */ 240 PROPERTY_ENTRY_U8("scope", POWER_SUPPLY_SCOPE_DEVICE), 241 {} 242 }; 243 244 static const struct software_node dgpu_node = { 245 .properties = dgpu_properties, 246 }; 247 248 static int i2c_dw_pci_probe(struct pci_dev *pdev, 249 const struct pci_device_id *id) 250 { 251 struct dw_i2c_dev *dev; 252 struct i2c_adapter *adap; 253 int r; 254 struct dw_pci_controller *controller; 255 struct dw_scl_sda_cfg *cfg; 256 struct i2c_timings *t; 257 258 if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) 259 return dev_err_probe(&pdev->dev, -EINVAL, 260 "Invalid driver data %ld\n", 261 id->driver_data); 262 263 controller = &dw_pci_controllers[id->driver_data]; 264 265 r = pcim_enable_device(pdev); 266 if (r) 267 return dev_err_probe(&pdev->dev, r, 268 "Failed to enable I2C PCI device\n"); 269 270 pci_set_master(pdev); 271 272 r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev)); 273 if (r) 274 return dev_err_probe(&pdev->dev, r, 275 "I/O memory remapping failed\n"); 276 277 dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); 278 if (!dev) 279 return -ENOMEM; 280 281 r = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); 282 if (r < 0) 283 return r; 284 285 dev->get_clk_rate_khz = controller->get_clk_rate_khz; 286 dev->base = pcim_iomap_table(pdev)[0]; 287 dev->dev = &pdev->dev; 288 dev->irq = pci_irq_vector(pdev, 0); 289 dev->flags |= controller->flags; 290 291 t = &dev->timings; 292 i2c_parse_fw_timings(&pdev->dev, t, false); 293 294 pci_set_drvdata(pdev, dev); 295 296 if (controller->setup) { 297 r = controller->setup(pdev, controller); 298 if (r) { 299 pci_free_irq_vectors(pdev); 300 return r; 301 } 302 } 303 304 i2c_dw_adjust_bus_speed(dev); 305 306 if (has_acpi_companion(&pdev->dev)) 307 i2c_dw_acpi_configure(&pdev->dev); 308 309 r = i2c_dw_validate_speed(dev); 310 if (r) { 311 pci_free_irq_vectors(pdev); 312 return r; 313 } 314 315 i2c_dw_configure(dev); 316 317 if (controller->scl_sda_cfg) { 318 cfg = controller->scl_sda_cfg; 319 dev->ss_hcnt = cfg->ss_hcnt; 320 dev->fs_hcnt = cfg->fs_hcnt; 321 dev->ss_lcnt = cfg->ss_lcnt; 322 dev->fs_lcnt = cfg->fs_lcnt; 323 dev->sda_hold_time = cfg->sda_hold; 324 } 325 326 adap = &dev->adapter; 327 adap->owner = THIS_MODULE; 328 adap->class = 0; 329 ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev)); 330 adap->nr = controller->bus_num; 331 332 r = i2c_dw_probe(dev); 333 if (r) { 334 pci_free_irq_vectors(pdev); 335 return r; 336 } 337 338 if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) { 339 dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, &dgpu_node); 340 if (IS_ERR(dev->slave)) 341 return dev_err_probe(dev->dev, PTR_ERR(dev->slave), 342 "register UCSI failed\n"); 343 } 344 345 pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); 346 pm_runtime_use_autosuspend(&pdev->dev); 347 pm_runtime_put_autosuspend(&pdev->dev); 348 pm_runtime_allow(&pdev->dev); 349 350 return 0; 351 } 352 353 static void i2c_dw_pci_remove(struct pci_dev *pdev) 354 { 355 struct dw_i2c_dev *dev = pci_get_drvdata(pdev); 356 357 dev->disable(dev); 358 pm_runtime_forbid(&pdev->dev); 359 pm_runtime_get_noresume(&pdev->dev); 360 361 i2c_del_adapter(&dev->adapter); 362 devm_free_irq(&pdev->dev, dev->irq, dev); 363 pci_free_irq_vectors(pdev); 364 } 365 366 static const struct pci_device_id i2_designware_pci_ids[] = { 367 /* Medfield */ 368 { PCI_VDEVICE(INTEL, 0x0817), medfield }, 369 { PCI_VDEVICE(INTEL, 0x0818), medfield }, 370 { PCI_VDEVICE(INTEL, 0x0819), medfield }, 371 { PCI_VDEVICE(INTEL, 0x082C), medfield }, 372 { PCI_VDEVICE(INTEL, 0x082D), medfield }, 373 { PCI_VDEVICE(INTEL, 0x082E), medfield }, 374 /* Merrifield */ 375 { PCI_VDEVICE(INTEL, 0x1195), merrifield }, 376 { PCI_VDEVICE(INTEL, 0x1196), merrifield }, 377 /* Baytrail */ 378 { PCI_VDEVICE(INTEL, 0x0F41), baytrail }, 379 { PCI_VDEVICE(INTEL, 0x0F42), baytrail }, 380 { PCI_VDEVICE(INTEL, 0x0F43), baytrail }, 381 { PCI_VDEVICE(INTEL, 0x0F44), baytrail }, 382 { PCI_VDEVICE(INTEL, 0x0F45), baytrail }, 383 { PCI_VDEVICE(INTEL, 0x0F46), baytrail }, 384 { PCI_VDEVICE(INTEL, 0x0F47), baytrail }, 385 /* Haswell */ 386 { PCI_VDEVICE(INTEL, 0x9c61), haswell }, 387 { PCI_VDEVICE(INTEL, 0x9c62), haswell }, 388 /* Braswell / Cherrytrail */ 389 { PCI_VDEVICE(INTEL, 0x22C1), cherrytrail }, 390 { PCI_VDEVICE(INTEL, 0x22C2), cherrytrail }, 391 { PCI_VDEVICE(INTEL, 0x22C3), cherrytrail }, 392 { PCI_VDEVICE(INTEL, 0x22C4), cherrytrail }, 393 { PCI_VDEVICE(INTEL, 0x22C5), cherrytrail }, 394 { PCI_VDEVICE(INTEL, 0x22C6), cherrytrail }, 395 { PCI_VDEVICE(INTEL, 0x22C7), cherrytrail }, 396 /* Elkhart Lake (PSE I2C) */ 397 { PCI_VDEVICE(INTEL, 0x4bb9), elkhartlake }, 398 { PCI_VDEVICE(INTEL, 0x4bba), elkhartlake }, 399 { PCI_VDEVICE(INTEL, 0x4bbb), elkhartlake }, 400 { PCI_VDEVICE(INTEL, 0x4bbc), elkhartlake }, 401 { PCI_VDEVICE(INTEL, 0x4bbd), elkhartlake }, 402 { PCI_VDEVICE(INTEL, 0x4bbe), elkhartlake }, 403 { PCI_VDEVICE(INTEL, 0x4bbf), elkhartlake }, 404 { PCI_VDEVICE(INTEL, 0x4bc0), elkhartlake }, 405 /* AMD NAVI */ 406 { PCI_VDEVICE(ATI, 0x7314), navi_amd }, 407 { PCI_VDEVICE(ATI, 0x73a4), navi_amd }, 408 { PCI_VDEVICE(ATI, 0x73e4), navi_amd }, 409 { PCI_VDEVICE(ATI, 0x73c4), navi_amd }, 410 { PCI_VDEVICE(ATI, 0x7444), navi_amd }, 411 { PCI_VDEVICE(ATI, 0x7464), navi_amd }, 412 { 0,} 413 }; 414 MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids); 415 416 static struct pci_driver dw_i2c_driver = { 417 .name = DRIVER_NAME, 418 .id_table = i2_designware_pci_ids, 419 .probe = i2c_dw_pci_probe, 420 .remove = i2c_dw_pci_remove, 421 .driver = { 422 .pm = &i2c_dw_pm_ops, 423 }, 424 }; 425 module_pci_driver(dw_i2c_driver); 426 427 /* Work with hotplug and coldplug */ 428 MODULE_ALIAS("i2c_designware-pci"); 429 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); 430 MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter"); 431 MODULE_LICENSE("GPL"); 432