1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Synopsys DesignWare I2C adapter driver (master only). 4 * 5 * Based on the TI DAVINCI I2C adapter driver. 6 * 7 * Copyright (C) 2006 Texas Instruments. 8 * Copyright (C) 2007 MontaVista Software Inc. 9 * Copyright (C) 2009 Provigent Ltd. 10 * Copyright (C) 2011, 2015, 2016 Intel Corporation. 11 */ 12 #include <linux/acpi.h> 13 #include <linux/delay.h> 14 #include <linux/err.h> 15 #include <linux/errno.h> 16 #include <linux/i2c.h> 17 #include <linux/interrupt.h> 18 #include <linux/io.h> 19 #include <linux/kernel.h> 20 #include <linux/module.h> 21 #include <linux/pci.h> 22 #include <linux/pm_runtime.h> 23 #include <linux/sched.h> 24 #include <linux/slab.h> 25 26 #include "i2c-designware-core.h" 27 #include "i2c-ccgx-ucsi.h" 28 29 #define DRIVER_NAME "i2c-designware-pci" 30 31 enum dw_pci_ctl_id_t { 32 medfield, 33 merrifield, 34 baytrail, 35 cherrytrail, 36 haswell, 37 elkhartlake, 38 navi_amd, 39 }; 40 41 /* 42 * This is a legacy structure to describe the hardware counters 43 * to configure signal timings on the bus. For Device Tree platforms 44 * one should use the respective properties and for ACPI there is 45 * a set of ACPI methods that provide these counters. No new 46 * platform should use this structure. 47 */ 48 struct dw_scl_sda_cfg { 49 u16 ss_hcnt; 50 u16 fs_hcnt; 51 u16 ss_lcnt; 52 u16 fs_lcnt; 53 u32 sda_hold; 54 }; 55 56 struct dw_pci_controller { 57 u32 bus_num; 58 u32 flags; 59 struct dw_scl_sda_cfg *scl_sda_cfg; 60 int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c); 61 u32 (*get_clk_rate_khz)(struct dw_i2c_dev *dev); 62 }; 63 64 /* Merrifield HCNT/LCNT/SDA hold time */ 65 static struct dw_scl_sda_cfg mrfld_config = { 66 .ss_hcnt = 0x2f8, 67 .fs_hcnt = 0x87, 68 .ss_lcnt = 0x37b, 69 .fs_lcnt = 0x10a, 70 }; 71 72 /* BayTrail HCNT/LCNT/SDA hold time */ 73 static struct dw_scl_sda_cfg byt_config = { 74 .ss_hcnt = 0x200, 75 .fs_hcnt = 0x55, 76 .ss_lcnt = 0x200, 77 .fs_lcnt = 0x99, 78 .sda_hold = 0x6, 79 }; 80 81 /* Haswell HCNT/LCNT/SDA hold time */ 82 static struct dw_scl_sda_cfg hsw_config = { 83 .ss_hcnt = 0x01b0, 84 .fs_hcnt = 0x48, 85 .ss_lcnt = 0x01fb, 86 .fs_lcnt = 0xa0, 87 .sda_hold = 0x9, 88 }; 89 90 /* NAVI-AMD HCNT/LCNT/SDA hold time */ 91 static struct dw_scl_sda_cfg navi_amd_config = { 92 .ss_hcnt = 0x1ae, 93 .ss_lcnt = 0x23a, 94 .sda_hold = 0x9, 95 }; 96 97 static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev) 98 { 99 return 25000; 100 } 101 102 static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c) 103 { 104 struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev); 105 106 switch (pdev->device) { 107 case 0x0817: 108 dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ; 109 fallthrough; 110 case 0x0818: 111 case 0x0819: 112 c->bus_num = pdev->device - 0x817 + 3; 113 return 0; 114 case 0x082C: 115 case 0x082D: 116 case 0x082E: 117 c->bus_num = pdev->device - 0x82C + 0; 118 return 0; 119 } 120 return -ENODEV; 121 } 122 123 static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c) 124 { 125 /* 126 * On Intel Merrifield the user visible i2c buses are enumerated 127 * [1..7]. So, we add 1 to shift the default range. Besides that the 128 * first PCI slot provides 4 functions, that's why we have to add 0 to 129 * the first slot and 4 to the next one. 130 */ 131 switch (PCI_SLOT(pdev->devfn)) { 132 case 8: 133 c->bus_num = PCI_FUNC(pdev->devfn) + 0 + 1; 134 return 0; 135 case 9: 136 c->bus_num = PCI_FUNC(pdev->devfn) + 4 + 1; 137 return 0; 138 } 139 return -ENODEV; 140 } 141 142 static u32 ehl_get_clk_rate_khz(struct dw_i2c_dev *dev) 143 { 144 return 100000; 145 } 146 147 static u32 navi_amd_get_clk_rate_khz(struct dw_i2c_dev *dev) 148 { 149 return 100000; 150 } 151 152 static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c) 153 { 154 struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev); 155 156 dev->flags |= MODEL_AMD_NAVI_GPU; 157 dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ; 158 return 0; 159 } 160 161 static struct dw_pci_controller dw_pci_controllers[] = { 162 [medfield] = { 163 .bus_num = -1, 164 .setup = mfld_setup, 165 .get_clk_rate_khz = mfld_get_clk_rate_khz, 166 }, 167 [merrifield] = { 168 .bus_num = -1, 169 .scl_sda_cfg = &mrfld_config, 170 .setup = mrfld_setup, 171 }, 172 [baytrail] = { 173 .bus_num = -1, 174 .scl_sda_cfg = &byt_config, 175 }, 176 [haswell] = { 177 .bus_num = -1, 178 .scl_sda_cfg = &hsw_config, 179 }, 180 [cherrytrail] = { 181 .bus_num = -1, 182 .scl_sda_cfg = &byt_config, 183 }, 184 [elkhartlake] = { 185 .bus_num = -1, 186 .get_clk_rate_khz = ehl_get_clk_rate_khz, 187 }, 188 [navi_amd] = { 189 .bus_num = -1, 190 .scl_sda_cfg = &navi_amd_config, 191 .setup = navi_amd_setup, 192 .get_clk_rate_khz = navi_amd_get_clk_rate_khz, 193 }, 194 }; 195 196 static int __maybe_unused i2c_dw_pci_runtime_suspend(struct device *dev) 197 { 198 struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); 199 200 i_dev->disable(i_dev); 201 return 0; 202 } 203 204 static int __maybe_unused i2c_dw_pci_suspend(struct device *dev) 205 { 206 struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); 207 208 i2c_mark_adapter_suspended(&i_dev->adapter); 209 210 return i2c_dw_pci_runtime_suspend(dev); 211 } 212 213 static int __maybe_unused i2c_dw_pci_runtime_resume(struct device *dev) 214 { 215 struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); 216 217 return i_dev->init(i_dev); 218 } 219 220 static int __maybe_unused i2c_dw_pci_resume(struct device *dev) 221 { 222 struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); 223 int ret; 224 225 ret = i2c_dw_pci_runtime_resume(dev); 226 227 i2c_mark_adapter_resumed(&i_dev->adapter); 228 229 return ret; 230 } 231 232 static const struct dev_pm_ops i2c_dw_pm_ops = { 233 SET_SYSTEM_SLEEP_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume) 234 SET_RUNTIME_PM_OPS(i2c_dw_pci_runtime_suspend, i2c_dw_pci_runtime_resume, NULL) 235 }; 236 237 static int i2c_dw_pci_probe(struct pci_dev *pdev, 238 const struct pci_device_id *id) 239 { 240 struct dw_i2c_dev *dev; 241 struct i2c_adapter *adap; 242 int r; 243 struct dw_pci_controller *controller; 244 struct dw_scl_sda_cfg *cfg; 245 struct i2c_timings *t; 246 247 if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) 248 return dev_err_probe(&pdev->dev, -EINVAL, 249 "Invalid driver data %ld\n", 250 id->driver_data); 251 252 controller = &dw_pci_controllers[id->driver_data]; 253 254 r = pcim_enable_device(pdev); 255 if (r) 256 return dev_err_probe(&pdev->dev, r, 257 "Failed to enable I2C PCI device\n"); 258 259 pci_set_master(pdev); 260 261 r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev)); 262 if (r) 263 return dev_err_probe(&pdev->dev, r, 264 "I/O memory remapping failed\n"); 265 266 dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); 267 if (!dev) 268 return -ENOMEM; 269 270 r = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); 271 if (r < 0) 272 return r; 273 274 dev->get_clk_rate_khz = controller->get_clk_rate_khz; 275 dev->base = pcim_iomap_table(pdev)[0]; 276 dev->dev = &pdev->dev; 277 dev->irq = pci_irq_vector(pdev, 0); 278 dev->flags |= controller->flags; 279 280 t = &dev->timings; 281 i2c_parse_fw_timings(&pdev->dev, t, false); 282 283 pci_set_drvdata(pdev, dev); 284 285 if (controller->setup) { 286 r = controller->setup(pdev, controller); 287 if (r) { 288 pci_free_irq_vectors(pdev); 289 return r; 290 } 291 } 292 293 i2c_dw_adjust_bus_speed(dev); 294 295 if (has_acpi_companion(&pdev->dev)) 296 i2c_dw_acpi_configure(&pdev->dev); 297 298 r = i2c_dw_validate_speed(dev); 299 if (r) { 300 pci_free_irq_vectors(pdev); 301 return r; 302 } 303 304 i2c_dw_configure(dev); 305 306 if (controller->scl_sda_cfg) { 307 cfg = controller->scl_sda_cfg; 308 dev->ss_hcnt = cfg->ss_hcnt; 309 dev->fs_hcnt = cfg->fs_hcnt; 310 dev->ss_lcnt = cfg->ss_lcnt; 311 dev->fs_lcnt = cfg->fs_lcnt; 312 dev->sda_hold_time = cfg->sda_hold; 313 } 314 315 adap = &dev->adapter; 316 adap->owner = THIS_MODULE; 317 adap->class = 0; 318 ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev)); 319 adap->nr = controller->bus_num; 320 321 r = i2c_dw_probe(dev); 322 if (r) { 323 pci_free_irq_vectors(pdev); 324 return r; 325 } 326 327 if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) { 328 dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, NULL); 329 if (IS_ERR(dev->slave)) 330 return dev_err_probe(dev->dev, PTR_ERR(dev->slave), 331 "register UCSI failed\n"); 332 } 333 334 pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); 335 pm_runtime_use_autosuspend(&pdev->dev); 336 pm_runtime_put_autosuspend(&pdev->dev); 337 pm_runtime_allow(&pdev->dev); 338 339 return 0; 340 } 341 342 static void i2c_dw_pci_remove(struct pci_dev *pdev) 343 { 344 struct dw_i2c_dev *dev = pci_get_drvdata(pdev); 345 346 dev->disable(dev); 347 pm_runtime_forbid(&pdev->dev); 348 pm_runtime_get_noresume(&pdev->dev); 349 350 i2c_del_adapter(&dev->adapter); 351 devm_free_irq(&pdev->dev, dev->irq, dev); 352 pci_free_irq_vectors(pdev); 353 } 354 355 static const struct pci_device_id i2_designware_pci_ids[] = { 356 /* Medfield */ 357 { PCI_VDEVICE(INTEL, 0x0817), medfield }, 358 { PCI_VDEVICE(INTEL, 0x0818), medfield }, 359 { PCI_VDEVICE(INTEL, 0x0819), medfield }, 360 { PCI_VDEVICE(INTEL, 0x082C), medfield }, 361 { PCI_VDEVICE(INTEL, 0x082D), medfield }, 362 { PCI_VDEVICE(INTEL, 0x082E), medfield }, 363 /* Merrifield */ 364 { PCI_VDEVICE(INTEL, 0x1195), merrifield }, 365 { PCI_VDEVICE(INTEL, 0x1196), merrifield }, 366 /* Baytrail */ 367 { PCI_VDEVICE(INTEL, 0x0F41), baytrail }, 368 { PCI_VDEVICE(INTEL, 0x0F42), baytrail }, 369 { PCI_VDEVICE(INTEL, 0x0F43), baytrail }, 370 { PCI_VDEVICE(INTEL, 0x0F44), baytrail }, 371 { PCI_VDEVICE(INTEL, 0x0F45), baytrail }, 372 { PCI_VDEVICE(INTEL, 0x0F46), baytrail }, 373 { PCI_VDEVICE(INTEL, 0x0F47), baytrail }, 374 /* Haswell */ 375 { PCI_VDEVICE(INTEL, 0x9c61), haswell }, 376 { PCI_VDEVICE(INTEL, 0x9c62), haswell }, 377 /* Braswell / Cherrytrail */ 378 { PCI_VDEVICE(INTEL, 0x22C1), cherrytrail }, 379 { PCI_VDEVICE(INTEL, 0x22C2), cherrytrail }, 380 { PCI_VDEVICE(INTEL, 0x22C3), cherrytrail }, 381 { PCI_VDEVICE(INTEL, 0x22C4), cherrytrail }, 382 { PCI_VDEVICE(INTEL, 0x22C5), cherrytrail }, 383 { PCI_VDEVICE(INTEL, 0x22C6), cherrytrail }, 384 { PCI_VDEVICE(INTEL, 0x22C7), cherrytrail }, 385 /* Elkhart Lake (PSE I2C) */ 386 { PCI_VDEVICE(INTEL, 0x4bb9), elkhartlake }, 387 { PCI_VDEVICE(INTEL, 0x4bba), elkhartlake }, 388 { PCI_VDEVICE(INTEL, 0x4bbb), elkhartlake }, 389 { PCI_VDEVICE(INTEL, 0x4bbc), elkhartlake }, 390 { PCI_VDEVICE(INTEL, 0x4bbd), elkhartlake }, 391 { PCI_VDEVICE(INTEL, 0x4bbe), elkhartlake }, 392 { PCI_VDEVICE(INTEL, 0x4bbf), elkhartlake }, 393 { PCI_VDEVICE(INTEL, 0x4bc0), elkhartlake }, 394 /* AMD NAVI */ 395 { PCI_VDEVICE(ATI, 0x7314), navi_amd }, 396 { PCI_VDEVICE(ATI, 0x73a4), navi_amd }, 397 { PCI_VDEVICE(ATI, 0x73e4), navi_amd }, 398 { PCI_VDEVICE(ATI, 0x73c4), navi_amd }, 399 { 0,} 400 }; 401 MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids); 402 403 static struct pci_driver dw_i2c_driver = { 404 .name = DRIVER_NAME, 405 .id_table = i2_designware_pci_ids, 406 .probe = i2c_dw_pci_probe, 407 .remove = i2c_dw_pci_remove, 408 .driver = { 409 .pm = &i2c_dw_pm_ops, 410 }, 411 }; 412 module_pci_driver(dw_i2c_driver); 413 414 /* Work with hotplug and coldplug */ 415 MODULE_ALIAS("i2c_designware-pci"); 416 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); 417 MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter"); 418 MODULE_LICENSE("GPL"); 419