1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Synopsys DesignWare I2C adapter driver (master only). 4 * 5 * Based on the TI DAVINCI I2C adapter driver. 6 * 7 * Copyright (C) 2006 Texas Instruments. 8 * Copyright (C) 2007 MontaVista Software Inc. 9 * Copyright (C) 2009 Provigent Ltd. 10 */ 11 #include <linux/delay.h> 12 #include <linux/err.h> 13 #include <linux/errno.h> 14 #include <linux/export.h> 15 #include <linux/gpio/consumer.h> 16 #include <linux/i2c.h> 17 #include <linux/interrupt.h> 18 #include <linux/io.h> 19 #include <linux/module.h> 20 #include <linux/pinctrl/consumer.h> 21 #include <linux/pm_runtime.h> 22 #include <linux/regmap.h> 23 #include <linux/reset.h> 24 25 #include "i2c-designware-core.h" 26 27 #define AMD_TIMEOUT_MIN_US 25 28 #define AMD_TIMEOUT_MAX_US 250 29 #define AMD_MASTERCFG_MASK GENMASK(15, 0) 30 31 static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev) 32 { 33 /* Configure Tx/Rx FIFO threshold levels */ 34 regmap_write(dev->map, DW_IC_TX_TL, dev->tx_fifo_depth / 2); 35 regmap_write(dev->map, DW_IC_RX_TL, 0); 36 37 /* Configure the I2C master */ 38 regmap_write(dev->map, DW_IC_CON, dev->master_cfg); 39 } 40 41 static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) 42 { 43 unsigned int comp_param1; 44 u32 sda_falling_time, scl_falling_time; 45 struct i2c_timings *t = &dev->timings; 46 const char *fp_str = ""; 47 u32 ic_clk; 48 int ret; 49 50 ret = i2c_dw_acquire_lock(dev); 51 if (ret) 52 return ret; 53 54 ret = regmap_read(dev->map, DW_IC_COMP_PARAM_1, &comp_param1); 55 i2c_dw_release_lock(dev); 56 if (ret) 57 return ret; 58 59 /* Set standard and fast speed dividers for high/low periods */ 60 sda_falling_time = t->sda_fall_ns ?: 300; /* ns */ 61 scl_falling_time = t->scl_fall_ns ?: 300; /* ns */ 62 63 /* Calculate SCL timing parameters for standard mode if not set */ 64 if (!dev->ss_hcnt || !dev->ss_lcnt) { 65 ic_clk = i2c_dw_clk_rate(dev); 66 dev->ss_hcnt = 67 i2c_dw_scl_hcnt(ic_clk, 68 4000, /* tHD;STA = tHIGH = 4.0 us */ 69 sda_falling_time, 70 0, /* 0: DW default, 1: Ideal */ 71 0); /* No offset */ 72 dev->ss_lcnt = 73 i2c_dw_scl_lcnt(ic_clk, 74 4700, /* tLOW = 4.7 us */ 75 scl_falling_time, 76 0); /* No offset */ 77 } 78 dev_dbg(dev->dev, "Standard Mode HCNT:LCNT = %d:%d\n", 79 dev->ss_hcnt, dev->ss_lcnt); 80 81 /* 82 * Set SCL timing parameters for fast mode or fast mode plus. Only 83 * difference is the timing parameter values since the registers are 84 * the same. 85 */ 86 if (t->bus_freq_hz == I2C_MAX_FAST_MODE_PLUS_FREQ) { 87 /* 88 * Check are Fast Mode Plus parameters available. Calculate 89 * SCL timing parameters for Fast Mode Plus if not set. 90 */ 91 if (dev->fp_hcnt && dev->fp_lcnt) { 92 dev->fs_hcnt = dev->fp_hcnt; 93 dev->fs_lcnt = dev->fp_lcnt; 94 } else { 95 ic_clk = i2c_dw_clk_rate(dev); 96 dev->fs_hcnt = 97 i2c_dw_scl_hcnt(ic_clk, 98 260, /* tHIGH = 260 ns */ 99 sda_falling_time, 100 0, /* DW default */ 101 0); /* No offset */ 102 dev->fs_lcnt = 103 i2c_dw_scl_lcnt(ic_clk, 104 500, /* tLOW = 500 ns */ 105 scl_falling_time, 106 0); /* No offset */ 107 } 108 fp_str = " Plus"; 109 } 110 /* 111 * Calculate SCL timing parameters for fast mode if not set. They are 112 * needed also in high speed mode. 113 */ 114 if (!dev->fs_hcnt || !dev->fs_lcnt) { 115 ic_clk = i2c_dw_clk_rate(dev); 116 dev->fs_hcnt = 117 i2c_dw_scl_hcnt(ic_clk, 118 600, /* tHD;STA = tHIGH = 0.6 us */ 119 sda_falling_time, 120 0, /* 0: DW default, 1: Ideal */ 121 0); /* No offset */ 122 dev->fs_lcnt = 123 i2c_dw_scl_lcnt(ic_clk, 124 1300, /* tLOW = 1.3 us */ 125 scl_falling_time, 126 0); /* No offset */ 127 } 128 dev_dbg(dev->dev, "Fast Mode%s HCNT:LCNT = %d:%d\n", 129 fp_str, dev->fs_hcnt, dev->fs_lcnt); 130 131 /* Check is high speed possible and fall back to fast mode if not */ 132 if ((dev->master_cfg & DW_IC_CON_SPEED_MASK) == 133 DW_IC_CON_SPEED_HIGH) { 134 if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK) 135 != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) { 136 dev_err(dev->dev, "High Speed not supported!\n"); 137 t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ; 138 dev->master_cfg &= ~DW_IC_CON_SPEED_MASK; 139 dev->master_cfg |= DW_IC_CON_SPEED_FAST; 140 dev->hs_hcnt = 0; 141 dev->hs_lcnt = 0; 142 } else if (!dev->hs_hcnt || !dev->hs_lcnt) { 143 ic_clk = i2c_dw_clk_rate(dev); 144 dev->hs_hcnt = 145 i2c_dw_scl_hcnt(ic_clk, 146 160, /* tHIGH = 160 ns */ 147 sda_falling_time, 148 0, /* DW default */ 149 0); /* No offset */ 150 dev->hs_lcnt = 151 i2c_dw_scl_lcnt(ic_clk, 152 320, /* tLOW = 320 ns */ 153 scl_falling_time, 154 0); /* No offset */ 155 } 156 dev_dbg(dev->dev, "High Speed Mode HCNT:LCNT = %d:%d\n", 157 dev->hs_hcnt, dev->hs_lcnt); 158 } 159 160 ret = i2c_dw_set_sda_hold(dev); 161 if (ret) 162 return ret; 163 164 dev_dbg(dev->dev, "Bus speed: %s\n", i2c_freq_mode_string(t->bus_freq_hz)); 165 return 0; 166 } 167 168 /** 169 * i2c_dw_init_master() - Initialize the designware I2C master hardware 170 * @dev: device private data 171 * 172 * This functions configures and enables the I2C master. 173 * This function is called during I2C init function, and in case of timeout at 174 * run time. 175 */ 176 static int i2c_dw_init_master(struct dw_i2c_dev *dev) 177 { 178 int ret; 179 180 ret = i2c_dw_acquire_lock(dev); 181 if (ret) 182 return ret; 183 184 /* Disable the adapter */ 185 __i2c_dw_disable(dev); 186 187 /* Write standard speed timing parameters */ 188 regmap_write(dev->map, DW_IC_SS_SCL_HCNT, dev->ss_hcnt); 189 regmap_write(dev->map, DW_IC_SS_SCL_LCNT, dev->ss_lcnt); 190 191 /* Write fast mode/fast mode plus timing parameters */ 192 regmap_write(dev->map, DW_IC_FS_SCL_HCNT, dev->fs_hcnt); 193 regmap_write(dev->map, DW_IC_FS_SCL_LCNT, dev->fs_lcnt); 194 195 /* Write high speed timing parameters if supported */ 196 if (dev->hs_hcnt && dev->hs_lcnt) { 197 regmap_write(dev->map, DW_IC_HS_SCL_HCNT, dev->hs_hcnt); 198 regmap_write(dev->map, DW_IC_HS_SCL_LCNT, dev->hs_lcnt); 199 } 200 201 /* Write SDA hold time if supported */ 202 if (dev->sda_hold_time) 203 regmap_write(dev->map, DW_IC_SDA_HOLD, dev->sda_hold_time); 204 205 i2c_dw_configure_fifo_master(dev); 206 i2c_dw_release_lock(dev); 207 208 return 0; 209 } 210 211 static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) 212 { 213 struct i2c_msg *msgs = dev->msgs; 214 u32 ic_con = 0, ic_tar = 0; 215 unsigned int dummy; 216 217 /* Disable the adapter */ 218 __i2c_dw_disable(dev); 219 220 /* If the slave address is ten bit address, enable 10BITADDR */ 221 if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) { 222 ic_con = DW_IC_CON_10BITADDR_MASTER; 223 /* 224 * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing 225 * mode has to be enabled via bit 12 of IC_TAR register. 226 * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be 227 * detected from registers. 228 */ 229 ic_tar = DW_IC_TAR_10BITADDR_MASTER; 230 } 231 232 regmap_update_bits(dev->map, DW_IC_CON, DW_IC_CON_10BITADDR_MASTER, 233 ic_con); 234 235 /* 236 * Set the slave (target) address and enable 10-bit addressing mode 237 * if applicable. 238 */ 239 regmap_write(dev->map, DW_IC_TAR, 240 msgs[dev->msg_write_idx].addr | ic_tar); 241 242 /* Enforce disabled interrupts (due to HW issues) */ 243 regmap_write(dev->map, DW_IC_INTR_MASK, 0); 244 245 /* Enable the adapter */ 246 __i2c_dw_enable(dev); 247 248 /* Dummy read to avoid the register getting stuck on Bay Trail */ 249 regmap_read(dev->map, DW_IC_ENABLE_STATUS, &dummy); 250 251 /* Clear and enable interrupts */ 252 regmap_read(dev->map, DW_IC_CLR_INTR, &dummy); 253 regmap_write(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_MASTER_MASK); 254 } 255 256 static int i2c_dw_check_stopbit(struct dw_i2c_dev *dev) 257 { 258 u32 val; 259 int ret; 260 261 ret = regmap_read_poll_timeout(dev->map, DW_IC_INTR_STAT, val, 262 !(val & DW_IC_INTR_STOP_DET), 263 1100, 20000); 264 if (ret) 265 dev_err(dev->dev, "i2c timeout error %d\n", ret); 266 267 return ret; 268 } 269 270 static int i2c_dw_status(struct dw_i2c_dev *dev) 271 { 272 int status; 273 274 status = i2c_dw_wait_bus_not_busy(dev); 275 if (status) 276 return status; 277 278 return i2c_dw_check_stopbit(dev); 279 } 280 281 /* 282 * Initiate and continue master read/write transaction with polling 283 * based transfer routine afterward write messages into the Tx buffer. 284 */ 285 static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs, int num_msgs) 286 { 287 struct dw_i2c_dev *dev = i2c_get_adapdata(adap); 288 int msg_wrt_idx, msg_itr_lmt, buf_len, data_idx; 289 int cmd = 0, status; 290 u8 *tx_buf; 291 unsigned int val; 292 293 /* 294 * In order to enable the interrupt for UCSI i.e. AMD NAVI GPU card, 295 * it is mandatory to set the right value in specific register 296 * (offset:0x474) as per the hardware IP specification. 297 */ 298 regmap_write(dev->map, AMD_UCSI_INTR_REG, AMD_UCSI_INTR_EN); 299 300 dev->msgs = msgs; 301 dev->msgs_num = num_msgs; 302 i2c_dw_xfer_init(dev); 303 regmap_write(dev->map, DW_IC_INTR_MASK, 0); 304 305 /* Initiate messages read/write transaction */ 306 for (msg_wrt_idx = 0; msg_wrt_idx < num_msgs; msg_wrt_idx++) { 307 tx_buf = msgs[msg_wrt_idx].buf; 308 buf_len = msgs[msg_wrt_idx].len; 309 310 if (!(msgs[msg_wrt_idx].flags & I2C_M_RD)) 311 regmap_write(dev->map, DW_IC_TX_TL, buf_len - 1); 312 /* 313 * Initiate the i2c read/write transaction of buffer length, 314 * and poll for bus busy status. For the last message transfer, 315 * update the command with stopbit enable. 316 */ 317 for (msg_itr_lmt = buf_len; msg_itr_lmt > 0; msg_itr_lmt--) { 318 if (msg_wrt_idx == num_msgs - 1 && msg_itr_lmt == 1) 319 cmd |= BIT(9); 320 321 if (msgs[msg_wrt_idx].flags & I2C_M_RD) { 322 /* Due to hardware bug, need to write the same command twice. */ 323 regmap_write(dev->map, DW_IC_DATA_CMD, 0x100); 324 regmap_write(dev->map, DW_IC_DATA_CMD, 0x100 | cmd); 325 if (cmd) { 326 regmap_write(dev->map, DW_IC_TX_TL, 2 * (buf_len - 1)); 327 regmap_write(dev->map, DW_IC_RX_TL, 2 * (buf_len - 1)); 328 /* 329 * Need to check the stop bit. However, it cannot be 330 * detected from the registers so we check it always 331 * when read/write the last byte. 332 */ 333 status = i2c_dw_status(dev); 334 if (status) 335 return status; 336 337 for (data_idx = 0; data_idx < buf_len; data_idx++) { 338 regmap_read(dev->map, DW_IC_DATA_CMD, &val); 339 tx_buf[data_idx] = val; 340 } 341 status = i2c_dw_check_stopbit(dev); 342 if (status) 343 return status; 344 } 345 } else { 346 regmap_write(dev->map, DW_IC_DATA_CMD, *tx_buf++ | cmd); 347 usleep_range(AMD_TIMEOUT_MIN_US, AMD_TIMEOUT_MAX_US); 348 } 349 } 350 status = i2c_dw_check_stopbit(dev); 351 if (status) 352 return status; 353 } 354 355 return 0; 356 } 357 358 static int i2c_dw_poll_tx_empty(struct dw_i2c_dev *dev) 359 { 360 u32 val; 361 362 return regmap_read_poll_timeout(dev->map, DW_IC_RAW_INTR_STAT, val, 363 val & DW_IC_INTR_TX_EMPTY, 364 100, 1000); 365 } 366 367 static int i2c_dw_poll_rx_full(struct dw_i2c_dev *dev) 368 { 369 u32 val; 370 371 return regmap_read_poll_timeout(dev->map, DW_IC_RAW_INTR_STAT, val, 372 val & DW_IC_INTR_RX_FULL, 373 100, 1000); 374 } 375 376 static int txgbe_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs, 377 int num_msgs) 378 { 379 struct dw_i2c_dev *dev = i2c_get_adapdata(adap); 380 int msg_idx, buf_len, data_idx, ret; 381 unsigned int val, stop = 0; 382 u8 *buf; 383 384 dev->msgs = msgs; 385 dev->msgs_num = num_msgs; 386 i2c_dw_xfer_init(dev); 387 regmap_write(dev->map, DW_IC_INTR_MASK, 0); 388 389 for (msg_idx = 0; msg_idx < num_msgs; msg_idx++) { 390 buf = msgs[msg_idx].buf; 391 buf_len = msgs[msg_idx].len; 392 393 for (data_idx = 0; data_idx < buf_len; data_idx++) { 394 if (msg_idx == num_msgs - 1 && data_idx == buf_len - 1) 395 stop |= BIT(9); 396 397 if (msgs[msg_idx].flags & I2C_M_RD) { 398 regmap_write(dev->map, DW_IC_DATA_CMD, 0x100 | stop); 399 400 ret = i2c_dw_poll_rx_full(dev); 401 if (ret) 402 return ret; 403 404 regmap_read(dev->map, DW_IC_DATA_CMD, &val); 405 buf[data_idx] = val; 406 } else { 407 ret = i2c_dw_poll_tx_empty(dev); 408 if (ret) 409 return ret; 410 411 regmap_write(dev->map, DW_IC_DATA_CMD, 412 buf[data_idx] | stop); 413 } 414 } 415 } 416 417 return num_msgs; 418 } 419 420 /* 421 * Initiate (and continue) low level master read/write transaction. 422 * This function is only called from i2c_dw_isr, and pumping i2c_msg 423 * messages into the tx buffer. Even if the size of i2c_msg data is 424 * longer than the size of the tx buffer, it handles everything. 425 */ 426 static void 427 i2c_dw_xfer_msg(struct dw_i2c_dev *dev) 428 { 429 struct i2c_msg *msgs = dev->msgs; 430 u32 intr_mask; 431 int tx_limit, rx_limit; 432 u32 addr = msgs[dev->msg_write_idx].addr; 433 u32 buf_len = dev->tx_buf_len; 434 u8 *buf = dev->tx_buf; 435 bool need_restart = false; 436 unsigned int flr; 437 438 intr_mask = DW_IC_INTR_MASTER_MASK; 439 440 for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) { 441 u32 flags = msgs[dev->msg_write_idx].flags; 442 443 /* 444 * If target address has changed, we need to 445 * reprogram the target address in the I2C 446 * adapter when we are done with this transfer. 447 */ 448 if (msgs[dev->msg_write_idx].addr != addr) { 449 dev_err(dev->dev, 450 "%s: invalid target address\n", __func__); 451 dev->msg_err = -EINVAL; 452 break; 453 } 454 455 if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) { 456 /* new i2c_msg */ 457 buf = msgs[dev->msg_write_idx].buf; 458 buf_len = msgs[dev->msg_write_idx].len; 459 460 /* If both IC_EMPTYFIFO_HOLD_MASTER_EN and 461 * IC_RESTART_EN are set, we must manually 462 * set restart bit between messages. 463 */ 464 if ((dev->master_cfg & DW_IC_CON_RESTART_EN) && 465 (dev->msg_write_idx > 0)) 466 need_restart = true; 467 } 468 469 regmap_read(dev->map, DW_IC_TXFLR, &flr); 470 tx_limit = dev->tx_fifo_depth - flr; 471 472 regmap_read(dev->map, DW_IC_RXFLR, &flr); 473 rx_limit = dev->rx_fifo_depth - flr; 474 475 while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) { 476 u32 cmd = 0; 477 478 /* 479 * If IC_EMPTYFIFO_HOLD_MASTER_EN is set we must 480 * manually set the stop bit. However, it cannot be 481 * detected from the registers so we set it always 482 * when writing/reading the last byte. 483 */ 484 485 /* 486 * i2c-core always sets the buffer length of 487 * I2C_FUNC_SMBUS_BLOCK_DATA to 1. The length will 488 * be adjusted when receiving the first byte. 489 * Thus we can't stop the transaction here. 490 */ 491 if (dev->msg_write_idx == dev->msgs_num - 1 && 492 buf_len == 1 && !(flags & I2C_M_RECV_LEN)) 493 cmd |= BIT(9); 494 495 if (need_restart) { 496 cmd |= BIT(10); 497 need_restart = false; 498 } 499 500 if (msgs[dev->msg_write_idx].flags & I2C_M_RD) { 501 502 /* Avoid rx buffer overrun */ 503 if (dev->rx_outstanding >= dev->rx_fifo_depth) 504 break; 505 506 regmap_write(dev->map, DW_IC_DATA_CMD, 507 cmd | 0x100); 508 rx_limit--; 509 dev->rx_outstanding++; 510 } else { 511 regmap_write(dev->map, DW_IC_DATA_CMD, 512 cmd | *buf++); 513 } 514 tx_limit--; buf_len--; 515 } 516 517 dev->tx_buf = buf; 518 dev->tx_buf_len = buf_len; 519 520 /* 521 * Because we don't know the buffer length in the 522 * I2C_FUNC_SMBUS_BLOCK_DATA case, we can't stop the 523 * transaction here. Also disable the TX_EMPTY IRQ 524 * while waiting for the data length byte to avoid the 525 * bogus interrupts flood. 526 */ 527 if (flags & I2C_M_RECV_LEN) { 528 dev->status |= STATUS_WRITE_IN_PROGRESS; 529 intr_mask &= ~DW_IC_INTR_TX_EMPTY; 530 break; 531 } else if (buf_len > 0) { 532 /* more bytes to be written */ 533 dev->status |= STATUS_WRITE_IN_PROGRESS; 534 break; 535 } else 536 dev->status &= ~STATUS_WRITE_IN_PROGRESS; 537 } 538 539 /* 540 * If i2c_msg index search is completed, we don't need TX_EMPTY 541 * interrupt any more. 542 */ 543 if (dev->msg_write_idx == dev->msgs_num) 544 intr_mask &= ~DW_IC_INTR_TX_EMPTY; 545 546 if (dev->msg_err) 547 intr_mask = 0; 548 549 regmap_write(dev->map, DW_IC_INTR_MASK, intr_mask); 550 } 551 552 static u8 553 i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len) 554 { 555 struct i2c_msg *msgs = dev->msgs; 556 u32 flags = msgs[dev->msg_read_idx].flags; 557 558 /* 559 * Adjust the buffer length and mask the flag 560 * after receiving the first byte. 561 */ 562 len += (flags & I2C_CLIENT_PEC) ? 2 : 1; 563 dev->tx_buf_len = len - min_t(u8, len, dev->rx_outstanding); 564 msgs[dev->msg_read_idx].len = len; 565 msgs[dev->msg_read_idx].flags &= ~I2C_M_RECV_LEN; 566 567 /* 568 * Received buffer length, re-enable TX_EMPTY interrupt 569 * to resume the SMBUS transaction. 570 */ 571 regmap_update_bits(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_TX_EMPTY, 572 DW_IC_INTR_TX_EMPTY); 573 574 return len; 575 } 576 577 static void 578 i2c_dw_read(struct dw_i2c_dev *dev) 579 { 580 struct i2c_msg *msgs = dev->msgs; 581 unsigned int rx_valid; 582 583 for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) { 584 unsigned int tmp; 585 u32 len; 586 u8 *buf; 587 588 if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD)) 589 continue; 590 591 if (!(dev->status & STATUS_READ_IN_PROGRESS)) { 592 len = msgs[dev->msg_read_idx].len; 593 buf = msgs[dev->msg_read_idx].buf; 594 } else { 595 len = dev->rx_buf_len; 596 buf = dev->rx_buf; 597 } 598 599 regmap_read(dev->map, DW_IC_RXFLR, &rx_valid); 600 601 for (; len > 0 && rx_valid > 0; len--, rx_valid--) { 602 u32 flags = msgs[dev->msg_read_idx].flags; 603 604 regmap_read(dev->map, DW_IC_DATA_CMD, &tmp); 605 tmp &= DW_IC_DATA_CMD_DAT; 606 /* Ensure length byte is a valid value */ 607 if (flags & I2C_M_RECV_LEN) { 608 /* 609 * if IC_EMPTYFIFO_HOLD_MASTER_EN is set, which cannot be 610 * detected from the registers, the controller can be 611 * disabled if the STOP bit is set. But it is only set 612 * after receiving block data response length in 613 * I2C_FUNC_SMBUS_BLOCK_DATA case. That needs to read 614 * another byte with STOP bit set when the block data 615 * response length is invalid to complete the transaction. 616 */ 617 if (!tmp || tmp > I2C_SMBUS_BLOCK_MAX) 618 tmp = 1; 619 620 len = i2c_dw_recv_len(dev, tmp); 621 } 622 *buf++ = tmp; 623 dev->rx_outstanding--; 624 } 625 626 if (len > 0) { 627 dev->status |= STATUS_READ_IN_PROGRESS; 628 dev->rx_buf_len = len; 629 dev->rx_buf = buf; 630 return; 631 } else 632 dev->status &= ~STATUS_READ_IN_PROGRESS; 633 } 634 } 635 636 /* 637 * Prepare controller for a transaction and call i2c_dw_xfer_msg. 638 */ 639 static int 640 i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) 641 { 642 struct dw_i2c_dev *dev = i2c_get_adapdata(adap); 643 int ret; 644 645 dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num); 646 647 pm_runtime_get_sync(dev->dev); 648 649 /* 650 * Initiate I2C message transfer when polling mode is enabled, 651 * As it is polling based transfer mechanism, which does not support 652 * interrupt based functionalities of existing DesignWare driver. 653 */ 654 switch (dev->flags & MODEL_MASK) { 655 case MODEL_AMD_NAVI_GPU: 656 ret = amd_i2c_dw_xfer_quirk(adap, msgs, num); 657 goto done_nolock; 658 case MODEL_WANGXUN_SP: 659 ret = txgbe_i2c_dw_xfer_quirk(adap, msgs, num); 660 goto done_nolock; 661 default: 662 break; 663 } 664 665 reinit_completion(&dev->cmd_complete); 666 dev->msgs = msgs; 667 dev->msgs_num = num; 668 dev->cmd_err = 0; 669 dev->msg_write_idx = 0; 670 dev->msg_read_idx = 0; 671 dev->msg_err = 0; 672 dev->status = 0; 673 dev->abort_source = 0; 674 dev->rx_outstanding = 0; 675 676 ret = i2c_dw_acquire_lock(dev); 677 if (ret) 678 goto done_nolock; 679 680 ret = i2c_dw_wait_bus_not_busy(dev); 681 if (ret < 0) 682 goto done; 683 684 /* Start the transfers */ 685 i2c_dw_xfer_init(dev); 686 687 /* Wait for tx to complete */ 688 if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) { 689 dev_err(dev->dev, "controller timed out\n"); 690 /* i2c_dw_init implicitly disables the adapter */ 691 i2c_recover_bus(&dev->adapter); 692 i2c_dw_init_master(dev); 693 ret = -ETIMEDOUT; 694 goto done; 695 } 696 697 /* 698 * We must disable the adapter before returning and signaling the end 699 * of the current transfer. Otherwise the hardware might continue 700 * generating interrupts which in turn causes a race condition with 701 * the following transfer. Needs some more investigation if the 702 * additional interrupts are a hardware bug or this driver doesn't 703 * handle them correctly yet. 704 */ 705 __i2c_dw_disable_nowait(dev); 706 707 if (dev->msg_err) { 708 ret = dev->msg_err; 709 goto done; 710 } 711 712 /* No error */ 713 if (likely(!dev->cmd_err && !dev->status)) { 714 ret = num; 715 goto done; 716 } 717 718 /* We have an error */ 719 if (dev->cmd_err == DW_IC_ERR_TX_ABRT) { 720 ret = i2c_dw_handle_tx_abort(dev); 721 goto done; 722 } 723 724 if (dev->status) 725 dev_err(dev->dev, 726 "transfer terminated early - interrupt latency too high?\n"); 727 728 ret = -EIO; 729 730 done: 731 i2c_dw_release_lock(dev); 732 733 done_nolock: 734 pm_runtime_mark_last_busy(dev->dev); 735 pm_runtime_put_autosuspend(dev->dev); 736 737 return ret; 738 } 739 740 static const struct i2c_algorithm i2c_dw_algo = { 741 .master_xfer = i2c_dw_xfer, 742 .functionality = i2c_dw_func, 743 }; 744 745 static const struct i2c_adapter_quirks i2c_dw_quirks = { 746 .flags = I2C_AQ_NO_ZERO_LEN, 747 }; 748 749 static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) 750 { 751 unsigned int stat, dummy; 752 753 /* 754 * The IC_INTR_STAT register just indicates "enabled" interrupts. 755 * The unmasked raw version of interrupt status bits is available 756 * in the IC_RAW_INTR_STAT register. 757 * 758 * That is, 759 * stat = readl(IC_INTR_STAT); 760 * equals to, 761 * stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK); 762 * 763 * The raw version might be useful for debugging purposes. 764 */ 765 regmap_read(dev->map, DW_IC_INTR_STAT, &stat); 766 767 /* 768 * Do not use the IC_CLR_INTR register to clear interrupts, or 769 * you'll miss some interrupts, triggered during the period from 770 * readl(IC_INTR_STAT) to readl(IC_CLR_INTR). 771 * 772 * Instead, use the separately-prepared IC_CLR_* registers. 773 */ 774 if (stat & DW_IC_INTR_RX_UNDER) 775 regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy); 776 if (stat & DW_IC_INTR_RX_OVER) 777 regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy); 778 if (stat & DW_IC_INTR_TX_OVER) 779 regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy); 780 if (stat & DW_IC_INTR_RD_REQ) 781 regmap_read(dev->map, DW_IC_CLR_RD_REQ, &dummy); 782 if (stat & DW_IC_INTR_TX_ABRT) { 783 /* 784 * The IC_TX_ABRT_SOURCE register is cleared whenever 785 * the IC_CLR_TX_ABRT is read. Preserve it beforehand. 786 */ 787 regmap_read(dev->map, DW_IC_TX_ABRT_SOURCE, &dev->abort_source); 788 regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy); 789 } 790 if (stat & DW_IC_INTR_RX_DONE) 791 regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy); 792 if (stat & DW_IC_INTR_ACTIVITY) 793 regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy); 794 if ((stat & DW_IC_INTR_STOP_DET) && 795 ((dev->rx_outstanding == 0) || (stat & DW_IC_INTR_RX_FULL))) 796 regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy); 797 if (stat & DW_IC_INTR_START_DET) 798 regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy); 799 if (stat & DW_IC_INTR_GEN_CALL) 800 regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy); 801 802 return stat; 803 } 804 805 /* 806 * Interrupt service routine. This gets called whenever an I2C master interrupt 807 * occurs. 808 */ 809 static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) 810 { 811 struct dw_i2c_dev *dev = dev_id; 812 unsigned int stat, enabled; 813 814 regmap_read(dev->map, DW_IC_ENABLE, &enabled); 815 regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat); 816 if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY)) 817 return IRQ_NONE; 818 if (pm_runtime_suspended(dev->dev) || stat == GENMASK(31, 0)) 819 return IRQ_NONE; 820 dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat); 821 822 stat = i2c_dw_read_clear_intrbits(dev); 823 824 if (!(dev->status & STATUS_ACTIVE)) { 825 /* 826 * Unexpected interrupt in driver point of view. State 827 * variables are either unset or stale so acknowledge and 828 * disable interrupts for suppressing further interrupts if 829 * interrupt really came from this HW (E.g. firmware has left 830 * the HW active). 831 */ 832 regmap_write(dev->map, DW_IC_INTR_MASK, 0); 833 return IRQ_HANDLED; 834 } 835 836 if (stat & DW_IC_INTR_TX_ABRT) { 837 dev->cmd_err |= DW_IC_ERR_TX_ABRT; 838 dev->status &= ~STATUS_MASK; 839 dev->rx_outstanding = 0; 840 841 /* 842 * Anytime TX_ABRT is set, the contents of the tx/rx 843 * buffers are flushed. Make sure to skip them. 844 */ 845 regmap_write(dev->map, DW_IC_INTR_MASK, 0); 846 goto tx_aborted; 847 } 848 849 if (stat & DW_IC_INTR_RX_FULL) 850 i2c_dw_read(dev); 851 852 if (stat & DW_IC_INTR_TX_EMPTY) 853 i2c_dw_xfer_msg(dev); 854 855 /* 856 * No need to modify or disable the interrupt mask here. 857 * i2c_dw_xfer_msg() will take care of it according to 858 * the current transmit status. 859 */ 860 861 tx_aborted: 862 if (((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err) && 863 (dev->rx_outstanding == 0)) 864 complete(&dev->cmd_complete); 865 else if (unlikely(dev->flags & ACCESS_INTR_MASK)) { 866 /* Workaround to trigger pending interrupt */ 867 regmap_read(dev->map, DW_IC_INTR_MASK, &stat); 868 regmap_write(dev->map, DW_IC_INTR_MASK, 0); 869 regmap_write(dev->map, DW_IC_INTR_MASK, stat); 870 } 871 872 return IRQ_HANDLED; 873 } 874 875 void i2c_dw_configure_master(struct dw_i2c_dev *dev) 876 { 877 struct i2c_timings *t = &dev->timings; 878 879 dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY; 880 881 dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | 882 DW_IC_CON_RESTART_EN; 883 884 dev->mode = DW_IC_MASTER; 885 886 switch (t->bus_freq_hz) { 887 case I2C_MAX_STANDARD_MODE_FREQ: 888 dev->master_cfg |= DW_IC_CON_SPEED_STD; 889 break; 890 case I2C_MAX_HIGH_SPEED_MODE_FREQ: 891 dev->master_cfg |= DW_IC_CON_SPEED_HIGH; 892 break; 893 default: 894 dev->master_cfg |= DW_IC_CON_SPEED_FAST; 895 } 896 } 897 EXPORT_SYMBOL_GPL(i2c_dw_configure_master); 898 899 static void i2c_dw_prepare_recovery(struct i2c_adapter *adap) 900 { 901 struct dw_i2c_dev *dev = i2c_get_adapdata(adap); 902 903 i2c_dw_disable(dev); 904 reset_control_assert(dev->rst); 905 i2c_dw_prepare_clk(dev, false); 906 } 907 908 static void i2c_dw_unprepare_recovery(struct i2c_adapter *adap) 909 { 910 struct dw_i2c_dev *dev = i2c_get_adapdata(adap); 911 912 i2c_dw_prepare_clk(dev, true); 913 reset_control_deassert(dev->rst); 914 i2c_dw_init_master(dev); 915 } 916 917 static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev) 918 { 919 struct i2c_bus_recovery_info *rinfo = &dev->rinfo; 920 struct i2c_adapter *adap = &dev->adapter; 921 struct gpio_desc *gpio; 922 923 gpio = devm_gpiod_get_optional(dev->dev, "scl", GPIOD_OUT_HIGH); 924 if (IS_ERR_OR_NULL(gpio)) 925 return PTR_ERR_OR_ZERO(gpio); 926 927 rinfo->scl_gpiod = gpio; 928 929 gpio = devm_gpiod_get_optional(dev->dev, "sda", GPIOD_IN); 930 if (IS_ERR(gpio)) 931 return PTR_ERR(gpio); 932 rinfo->sda_gpiod = gpio; 933 934 rinfo->pinctrl = devm_pinctrl_get(dev->dev); 935 if (IS_ERR(rinfo->pinctrl)) { 936 if (PTR_ERR(rinfo->pinctrl) == -EPROBE_DEFER) 937 return PTR_ERR(rinfo->pinctrl); 938 939 rinfo->pinctrl = NULL; 940 dev_err(dev->dev, "getting pinctrl info failed: bus recovery might not work\n"); 941 } else if (!rinfo->pinctrl) { 942 dev_dbg(dev->dev, "pinctrl is disabled, bus recovery might not work\n"); 943 } 944 945 rinfo->recover_bus = i2c_generic_scl_recovery; 946 rinfo->prepare_recovery = i2c_dw_prepare_recovery; 947 rinfo->unprepare_recovery = i2c_dw_unprepare_recovery; 948 adap->bus_recovery_info = rinfo; 949 950 dev_info(dev->dev, "running with gpio recovery mode! scl%s", 951 rinfo->sda_gpiod ? ",sda" : ""); 952 953 return 0; 954 } 955 956 static int i2c_dw_poll_adap_quirk(struct dw_i2c_dev *dev) 957 { 958 struct i2c_adapter *adap = &dev->adapter; 959 int ret; 960 961 pm_runtime_get_noresume(dev->dev); 962 ret = i2c_add_numbered_adapter(adap); 963 if (ret) 964 dev_err(dev->dev, "Failed to add adapter: %d\n", ret); 965 pm_runtime_put_noidle(dev->dev); 966 967 return ret; 968 } 969 970 static bool i2c_dw_is_model_poll(struct dw_i2c_dev *dev) 971 { 972 switch (dev->flags & MODEL_MASK) { 973 case MODEL_AMD_NAVI_GPU: 974 case MODEL_WANGXUN_SP: 975 return true; 976 default: 977 return false; 978 } 979 } 980 981 int i2c_dw_probe_master(struct dw_i2c_dev *dev) 982 { 983 struct i2c_adapter *adap = &dev->adapter; 984 unsigned long irq_flags; 985 unsigned int ic_con; 986 int ret; 987 988 init_completion(&dev->cmd_complete); 989 990 dev->init = i2c_dw_init_master; 991 dev->disable = i2c_dw_disable; 992 993 ret = i2c_dw_init_regmap(dev); 994 if (ret) 995 return ret; 996 997 ret = i2c_dw_set_timings_master(dev); 998 if (ret) 999 return ret; 1000 1001 ret = i2c_dw_set_fifo_size(dev); 1002 if (ret) 1003 return ret; 1004 1005 /* Lock the bus for accessing DW_IC_CON */ 1006 ret = i2c_dw_acquire_lock(dev); 1007 if (ret) 1008 return ret; 1009 1010 /* 1011 * On AMD platforms BIOS advertises the bus clear feature 1012 * and enables the SCL/SDA stuck low. SMU FW does the 1013 * bus recovery process. Driver should not ignore this BIOS 1014 * advertisement of bus clear feature. 1015 */ 1016 ret = regmap_read(dev->map, DW_IC_CON, &ic_con); 1017 i2c_dw_release_lock(dev); 1018 if (ret) 1019 return ret; 1020 1021 if (ic_con & DW_IC_CON_BUS_CLEAR_CTRL) 1022 dev->master_cfg |= DW_IC_CON_BUS_CLEAR_CTRL; 1023 1024 ret = dev->init(dev); 1025 if (ret) 1026 return ret; 1027 1028 snprintf(adap->name, sizeof(adap->name), 1029 "Synopsys DesignWare I2C adapter"); 1030 adap->retries = 3; 1031 adap->algo = &i2c_dw_algo; 1032 adap->quirks = &i2c_dw_quirks; 1033 adap->dev.parent = dev->dev; 1034 i2c_set_adapdata(adap, dev); 1035 1036 if (i2c_dw_is_model_poll(dev)) 1037 return i2c_dw_poll_adap_quirk(dev); 1038 1039 if (dev->flags & ACCESS_NO_IRQ_SUSPEND) { 1040 irq_flags = IRQF_NO_SUSPEND; 1041 } else { 1042 irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND; 1043 } 1044 1045 ret = i2c_dw_acquire_lock(dev); 1046 if (ret) 1047 return ret; 1048 1049 regmap_write(dev->map, DW_IC_INTR_MASK, 0); 1050 i2c_dw_release_lock(dev); 1051 1052 ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags, 1053 dev_name(dev->dev), dev); 1054 if (ret) { 1055 dev_err(dev->dev, "failure requesting irq %i: %d\n", 1056 dev->irq, ret); 1057 return ret; 1058 } 1059 1060 ret = i2c_dw_init_recovery_info(dev); 1061 if (ret) 1062 return ret; 1063 1064 /* 1065 * Increment PM usage count during adapter registration in order to 1066 * avoid possible spurious runtime suspend when adapter device is 1067 * registered to the device core and immediate resume in case bus has 1068 * registered I2C slaves that do I2C transfers in their probe. 1069 */ 1070 pm_runtime_get_noresume(dev->dev); 1071 ret = i2c_add_numbered_adapter(adap); 1072 if (ret) 1073 dev_err(dev->dev, "failure adding adapter: %d\n", ret); 1074 pm_runtime_put_noidle(dev->dev); 1075 1076 return ret; 1077 } 1078 EXPORT_SYMBOL_GPL(i2c_dw_probe_master); 1079 1080 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter"); 1081 MODULE_LICENSE("GPL"); 1082