1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * Synopsys DesignWare I2C adapter driver. 4 * 5 * Based on the TI DAVINCI I2C adapter driver. 6 * 7 * Copyright (C) 2006 Texas Instruments. 8 * Copyright (C) 2007 MontaVista Software Inc. 9 * Copyright (C) 2009 Provigent Ltd. 10 */ 11 12 #include <linux/bits.h> 13 #include <linux/compiler_types.h> 14 #include <linux/completion.h> 15 #include <linux/dev_printk.h> 16 #include <linux/errno.h> 17 #include <linux/i2c.h> 18 #include <linux/regmap.h> 19 #include <linux/types.h> 20 21 #define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \ 22 I2C_FUNC_SMBUS_BYTE | \ 23 I2C_FUNC_SMBUS_BYTE_DATA | \ 24 I2C_FUNC_SMBUS_WORD_DATA | \ 25 I2C_FUNC_SMBUS_BLOCK_DATA | \ 26 I2C_FUNC_SMBUS_I2C_BLOCK) 27 28 #define DW_IC_CON_MASTER BIT(0) 29 #define DW_IC_CON_SPEED_STD (1 << 1) 30 #define DW_IC_CON_SPEED_FAST (2 << 1) 31 #define DW_IC_CON_SPEED_HIGH (3 << 1) 32 #define DW_IC_CON_SPEED_MASK GENMASK(2, 1) 33 #define DW_IC_CON_10BITADDR_SLAVE BIT(3) 34 #define DW_IC_CON_10BITADDR_MASTER BIT(4) 35 #define DW_IC_CON_RESTART_EN BIT(5) 36 #define DW_IC_CON_SLAVE_DISABLE BIT(6) 37 #define DW_IC_CON_STOP_DET_IFADDRESSED BIT(7) 38 #define DW_IC_CON_TX_EMPTY_CTRL BIT(8) 39 #define DW_IC_CON_RX_FIFO_FULL_HLD_CTRL BIT(9) 40 41 #define DW_IC_DATA_CMD_DAT GENMASK(7, 0) 42 43 /* 44 * Registers offset 45 */ 46 #define DW_IC_CON 0x00 47 #define DW_IC_TAR 0x04 48 #define DW_IC_SAR 0x08 49 #define DW_IC_DATA_CMD 0x10 50 #define DW_IC_SS_SCL_HCNT 0x14 51 #define DW_IC_SS_SCL_LCNT 0x18 52 #define DW_IC_FS_SCL_HCNT 0x1c 53 #define DW_IC_FS_SCL_LCNT 0x20 54 #define DW_IC_HS_SCL_HCNT 0x24 55 #define DW_IC_HS_SCL_LCNT 0x28 56 #define DW_IC_INTR_STAT 0x2c 57 #define DW_IC_INTR_MASK 0x30 58 #define DW_IC_RAW_INTR_STAT 0x34 59 #define DW_IC_RX_TL 0x38 60 #define DW_IC_TX_TL 0x3c 61 #define DW_IC_CLR_INTR 0x40 62 #define DW_IC_CLR_RX_UNDER 0x44 63 #define DW_IC_CLR_RX_OVER 0x48 64 #define DW_IC_CLR_TX_OVER 0x4c 65 #define DW_IC_CLR_RD_REQ 0x50 66 #define DW_IC_CLR_TX_ABRT 0x54 67 #define DW_IC_CLR_RX_DONE 0x58 68 #define DW_IC_CLR_ACTIVITY 0x5c 69 #define DW_IC_CLR_STOP_DET 0x60 70 #define DW_IC_CLR_START_DET 0x64 71 #define DW_IC_CLR_GEN_CALL 0x68 72 #define DW_IC_ENABLE 0x6c 73 #define DW_IC_STATUS 0x70 74 #define DW_IC_TXFLR 0x74 75 #define DW_IC_RXFLR 0x78 76 #define DW_IC_SDA_HOLD 0x7c 77 #define DW_IC_TX_ABRT_SOURCE 0x80 78 #define DW_IC_ENABLE_STATUS 0x9c 79 #define DW_IC_CLR_RESTART_DET 0xa8 80 #define DW_IC_COMP_PARAM_1 0xf4 81 #define DW_IC_COMP_VERSION 0xf8 82 #define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A 83 #define DW_IC_COMP_TYPE 0xfc 84 #define DW_IC_COMP_TYPE_VALUE 0x44570140 85 86 #define DW_IC_INTR_RX_UNDER BIT(0) 87 #define DW_IC_INTR_RX_OVER BIT(1) 88 #define DW_IC_INTR_RX_FULL BIT(2) 89 #define DW_IC_INTR_TX_OVER BIT(3) 90 #define DW_IC_INTR_TX_EMPTY BIT(4) 91 #define DW_IC_INTR_RD_REQ BIT(5) 92 #define DW_IC_INTR_TX_ABRT BIT(6) 93 #define DW_IC_INTR_RX_DONE BIT(7) 94 #define DW_IC_INTR_ACTIVITY BIT(8) 95 #define DW_IC_INTR_STOP_DET BIT(9) 96 #define DW_IC_INTR_START_DET BIT(10) 97 #define DW_IC_INTR_GEN_CALL BIT(11) 98 #define DW_IC_INTR_RESTART_DET BIT(12) 99 100 #define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ 101 DW_IC_INTR_TX_ABRT | \ 102 DW_IC_INTR_STOP_DET) 103 #define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MASK | \ 104 DW_IC_INTR_TX_EMPTY) 105 #define DW_IC_INTR_SLAVE_MASK (DW_IC_INTR_DEFAULT_MASK | \ 106 DW_IC_INTR_RX_DONE | \ 107 DW_IC_INTR_RX_UNDER | \ 108 DW_IC_INTR_RD_REQ) 109 110 #define DW_IC_STATUS_ACTIVITY BIT(0) 111 #define DW_IC_STATUS_TFE BIT(2) 112 #define DW_IC_STATUS_MASTER_ACTIVITY BIT(5) 113 #define DW_IC_STATUS_SLAVE_ACTIVITY BIT(6) 114 115 #define DW_IC_SDA_HOLD_RX_SHIFT 16 116 #define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, 16) 117 118 #define DW_IC_ERR_TX_ABRT 0x1 119 120 #define DW_IC_TAR_10BITADDR_MASTER BIT(12) 121 122 #define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3)) 123 #define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2) 124 125 /* 126 * status codes 127 */ 128 #define STATUS_IDLE 0x0 129 #define STATUS_WRITE_IN_PROGRESS 0x1 130 #define STATUS_READ_IN_PROGRESS 0x2 131 132 /* 133 * operation modes 134 */ 135 #define DW_IC_MASTER 0 136 #define DW_IC_SLAVE 1 137 138 /* 139 * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register 140 * 141 * Only expected abort codes are listed here 142 * refer to the datasheet for the full list 143 */ 144 #define ABRT_7B_ADDR_NOACK 0 145 #define ABRT_10ADDR1_NOACK 1 146 #define ABRT_10ADDR2_NOACK 2 147 #define ABRT_TXDATA_NOACK 3 148 #define ABRT_GCALL_NOACK 4 149 #define ABRT_GCALL_READ 5 150 #define ABRT_SBYTE_ACKDET 7 151 #define ABRT_SBYTE_NORSTRT 9 152 #define ABRT_10B_RD_NORSTRT 10 153 #define ABRT_MASTER_DIS 11 154 #define ARB_LOST 12 155 #define ABRT_SLAVE_FLUSH_TXFIFO 13 156 #define ABRT_SLAVE_ARBLOST 14 157 #define ABRT_SLAVE_RD_INTX 15 158 159 #define DW_IC_TX_ABRT_7B_ADDR_NOACK BIT(ABRT_7B_ADDR_NOACK) 160 #define DW_IC_TX_ABRT_10ADDR1_NOACK BIT(ABRT_10ADDR1_NOACK) 161 #define DW_IC_TX_ABRT_10ADDR2_NOACK BIT(ABRT_10ADDR2_NOACK) 162 #define DW_IC_TX_ABRT_TXDATA_NOACK BIT(ABRT_TXDATA_NOACK) 163 #define DW_IC_TX_ABRT_GCALL_NOACK BIT(ABRT_GCALL_NOACK) 164 #define DW_IC_TX_ABRT_GCALL_READ BIT(ABRT_GCALL_READ) 165 #define DW_IC_TX_ABRT_SBYTE_ACKDET BIT(ABRT_SBYTE_ACKDET) 166 #define DW_IC_TX_ABRT_SBYTE_NORSTRT BIT(ABRT_SBYTE_NORSTRT) 167 #define DW_IC_TX_ABRT_10B_RD_NORSTRT BIT(ABRT_10B_RD_NORSTRT) 168 #define DW_IC_TX_ABRT_MASTER_DIS BIT(ABRT_MASTER_DIS) 169 #define DW_IC_TX_ARB_LOST BIT(ARB_LOST) 170 #define DW_IC_RX_ABRT_SLAVE_RD_INTX BIT(ABRT_SLAVE_RD_INTX) 171 #define DW_IC_RX_ABRT_SLAVE_ARBLOST BIT(ABRT_SLAVE_ARBLOST) 172 #define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO BIT(ABRT_SLAVE_FLUSH_TXFIFO) 173 174 #define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ 175 DW_IC_TX_ABRT_10ADDR1_NOACK | \ 176 DW_IC_TX_ABRT_10ADDR2_NOACK | \ 177 DW_IC_TX_ABRT_TXDATA_NOACK | \ 178 DW_IC_TX_ABRT_GCALL_NOACK) 179 180 struct clk; 181 struct device; 182 struct reset_control; 183 184 /** 185 * struct dw_i2c_dev - private i2c-designware data 186 * @dev: driver model device node 187 * @map: IO registers map 188 * @sysmap: System controller registers map 189 * @base: IO registers pointer 190 * @ext: Extended IO registers pointer 191 * @cmd_complete: tx completion indicator 192 * @clk: input reference clock 193 * @pclk: clock required to access the registers 194 * @slave: represent an I2C slave device 195 * @cmd_err: run time hadware error code 196 * @msgs: points to an array of messages currently being transferred 197 * @msgs_num: the number of elements in msgs 198 * @msg_write_idx: the element index of the current tx message in the msgs 199 * array 200 * @tx_buf_len: the length of the current tx buffer 201 * @tx_buf: the current tx buffer 202 * @msg_read_idx: the element index of the current rx message in the msgs 203 * array 204 * @rx_buf_len: the length of the current rx buffer 205 * @rx_buf: the current rx buffer 206 * @msg_err: error status of the current transfer 207 * @status: i2c master status, one of STATUS_* 208 * @abort_source: copy of the TX_ABRT_SOURCE register 209 * @irq: interrupt number for the i2c master 210 * @adapter: i2c subsystem adapter node 211 * @slave_cfg: configuration for the slave device 212 * @tx_fifo_depth: depth of the hardware tx fifo 213 * @rx_fifo_depth: depth of the hardware rx fifo 214 * @rx_outstanding: current master-rx elements in tx fifo 215 * @timings: bus clock frequency, SDA hold and other timings 216 * @sda_hold_time: SDA hold value 217 * @ss_hcnt: standard speed HCNT value 218 * @ss_lcnt: standard speed LCNT value 219 * @fs_hcnt: fast speed HCNT value 220 * @fs_lcnt: fast speed LCNT value 221 * @fp_hcnt: fast plus HCNT value 222 * @fp_lcnt: fast plus LCNT value 223 * @hs_hcnt: high speed HCNT value 224 * @hs_lcnt: high speed LCNT value 225 * @acquire_lock: function to acquire a hardware lock on the bus 226 * @release_lock: function to release a hardware lock on the bus 227 * @shared_with_punit: true if this bus is shared with the SoCs PUNIT 228 * @disable: function to disable the controller 229 * @disable_int: function to disable all interrupts 230 * @init: function to initialize the I2C hardware 231 * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE 232 * @suspended: set to true if the controller is suspended 233 * 234 * HCNT and LCNT parameters can be used if the platform knows more accurate 235 * values than the one computed based only on the input clock frequency. 236 * Leave them to be %0 if not used. 237 */ 238 struct dw_i2c_dev { 239 struct device *dev; 240 struct regmap *map; 241 struct regmap *sysmap; 242 void __iomem *base; 243 void __iomem *ext; 244 struct completion cmd_complete; 245 struct clk *clk; 246 struct clk *pclk; 247 struct reset_control *rst; 248 struct i2c_client *slave; 249 u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev); 250 int cmd_err; 251 struct i2c_msg *msgs; 252 int msgs_num; 253 int msg_write_idx; 254 u32 tx_buf_len; 255 u8 *tx_buf; 256 int msg_read_idx; 257 u32 rx_buf_len; 258 u8 *rx_buf; 259 int msg_err; 260 unsigned int status; 261 u32 abort_source; 262 int irq; 263 u32 flags; 264 struct i2c_adapter adapter; 265 u32 functionality; 266 u32 master_cfg; 267 u32 slave_cfg; 268 unsigned int tx_fifo_depth; 269 unsigned int rx_fifo_depth; 270 int rx_outstanding; 271 struct i2c_timings timings; 272 u32 sda_hold_time; 273 u16 ss_hcnt; 274 u16 ss_lcnt; 275 u16 fs_hcnt; 276 u16 fs_lcnt; 277 u16 fp_hcnt; 278 u16 fp_lcnt; 279 u16 hs_hcnt; 280 u16 hs_lcnt; 281 int (*acquire_lock)(void); 282 void (*release_lock)(void); 283 bool shared_with_punit; 284 void (*disable)(struct dw_i2c_dev *dev); 285 void (*disable_int)(struct dw_i2c_dev *dev); 286 int (*init)(struct dw_i2c_dev *dev); 287 int (*set_sda_hold_time)(struct dw_i2c_dev *dev); 288 int mode; 289 struct i2c_bus_recovery_info rinfo; 290 bool suspended; 291 }; 292 293 #define ACCESS_INTR_MASK BIT(0) 294 #define ACCESS_NO_IRQ_SUSPEND BIT(1) 295 296 #define MODEL_MSCC_OCELOT BIT(8) 297 #define MODEL_BAIKAL_BT1 BIT(9) 298 #define MODEL_AMD_NAVI_GPU BIT(10) 299 #define MODEL_MASK GENMASK(11, 8) 300 301 /* 302 * Enable UCSI interrupt by writing 0xd at register 303 * offset 0x474 specified in hardware specification. 304 */ 305 #define AMD_UCSI_INTR_REG 0x474 306 #define AMD_UCSI_INTR_EN 0xd 307 308 int i2c_dw_init_regmap(struct dw_i2c_dev *dev); 309 u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset); 310 u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset); 311 int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev); 312 unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev); 313 int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare); 314 int i2c_dw_acquire_lock(struct dw_i2c_dev *dev); 315 void i2c_dw_release_lock(struct dw_i2c_dev *dev); 316 int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev); 317 int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev); 318 int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev); 319 u32 i2c_dw_func(struct i2c_adapter *adap); 320 void i2c_dw_disable(struct dw_i2c_dev *dev); 321 void i2c_dw_disable_int(struct dw_i2c_dev *dev); 322 323 static inline void __i2c_dw_enable(struct dw_i2c_dev *dev) 324 { 325 regmap_write(dev->map, DW_IC_ENABLE, 1); 326 } 327 328 static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev) 329 { 330 regmap_write(dev->map, DW_IC_ENABLE, 0); 331 } 332 333 void __i2c_dw_disable(struct dw_i2c_dev *dev); 334 335 extern void i2c_dw_configure_master(struct dw_i2c_dev *dev); 336 extern int i2c_dw_probe_master(struct dw_i2c_dev *dev); 337 338 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE) 339 extern void i2c_dw_configure_slave(struct dw_i2c_dev *dev); 340 extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev); 341 #else 342 static inline void i2c_dw_configure_slave(struct dw_i2c_dev *dev) { } 343 static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; } 344 #endif 345 346 static inline int i2c_dw_probe(struct dw_i2c_dev *dev) 347 { 348 switch (dev->mode) { 349 case DW_IC_SLAVE: 350 return i2c_dw_probe_slave(dev); 351 case DW_IC_MASTER: 352 return i2c_dw_probe_master(dev); 353 default: 354 dev_err(dev->dev, "Wrong operation mode: %d\n", dev->mode); 355 return -EINVAL; 356 } 357 } 358 359 static inline void i2c_dw_configure(struct dw_i2c_dev *dev) 360 { 361 if (i2c_detect_slave_mode(dev->dev)) 362 i2c_dw_configure_slave(dev); 363 else 364 i2c_dw_configure_master(dev); 365 } 366 367 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL) 368 extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev); 369 #else 370 static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; } 371 #endif 372 373 int i2c_dw_validate_speed(struct dw_i2c_dev *dev); 374 void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev); 375 376 #if IS_ENABLED(CONFIG_ACPI) 377 int i2c_dw_acpi_configure(struct device *device); 378 #else 379 static inline int i2c_dw_acpi_configure(struct device *device) { return -ENODEV; } 380 #endif 381