1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * i2c support for Silicon Labs' CP2615 Digital Audio Bridge 4 * 5 * (c) 2021, Bence Csókás <bence98@sch.bme.hu> 6 */ 7 8 #include <linux/errno.h> 9 #include <linux/i2c.h> 10 #include <linux/kernel.h> 11 #include <linux/module.h> 12 #include <linux/string.h> 13 #include <linux/usb.h> 14 15 /** CP2615 I/O Protocol implementation */ 16 17 #define CP2615_VID 0x10c4 18 #define CP2615_PID 0xeac1 19 20 #define IOP_EP_IN 0x82 21 #define IOP_EP_OUT 0x02 22 #define IOP_IFN 1 23 #define IOP_ALTSETTING 2 24 25 #define MAX_IOP_SIZE 64 26 #define MAX_IOP_PAYLOAD_SIZE (MAX_IOP_SIZE - 6) 27 #define MAX_I2C_SIZE (MAX_IOP_PAYLOAD_SIZE - 4) 28 29 enum cp2615_iop_msg_type { 30 iop_GetAccessoryInfo = 0xD100, 31 iop_AccessoryInfo = 0xA100, 32 iop_GetPortConfiguration = 0xD203, 33 iop_PortConfiguration = 0xA203, 34 iop_DoI2cTransfer = 0xD400, 35 iop_I2cTransferResult = 0xA400, 36 iop_GetSerialState = 0xD501, 37 iop_SerialState = 0xA501 38 }; 39 40 struct __packed cp2615_iop_msg { 41 __be16 preamble, length, msg; 42 u8 data[MAX_IOP_PAYLOAD_SIZE]; 43 }; 44 45 #define PART_ID_A01 0x1400 46 #define PART_ID_A02 0x1500 47 48 struct __packed cp2615_iop_accessory_info { 49 __be16 part_id, option_id, proto_ver; 50 }; 51 52 struct __packed cp2615_i2c_transfer { 53 u8 tag, i2caddr, read_len, write_len; 54 u8 data[MAX_I2C_SIZE]; 55 }; 56 57 /* Possible values for struct cp2615_i2c_transfer_result.status */ 58 enum cp2615_i2c_status { 59 /* Writing to the internal EEPROM failed, because it is locked */ 60 CP2615_CFG_LOCKED = -6, 61 /* read_len or write_len out of range */ 62 CP2615_INVALID_PARAM = -4, 63 /* I2C slave did not ACK in time */ 64 CP2615_TIMEOUT, 65 /* I2C bus busy */ 66 CP2615_BUS_BUSY, 67 /* I2C bus error (ie. device NAK'd the request) */ 68 CP2615_BUS_ERROR, 69 CP2615_SUCCESS 70 }; 71 72 struct __packed cp2615_i2c_transfer_result { 73 u8 tag, i2caddr; 74 s8 status; 75 u8 read_len; 76 u8 data[MAX_I2C_SIZE]; 77 }; 78 79 static int cp2615_init_iop_msg(struct cp2615_iop_msg *ret, enum cp2615_iop_msg_type msg, 80 const void *data, size_t data_len) 81 { 82 if (data_len > MAX_IOP_PAYLOAD_SIZE) 83 return -EFBIG; 84 85 if (!ret) 86 return -EINVAL; 87 88 ret->preamble = 0x2A2A; 89 ret->length = htons(data_len + 6); 90 ret->msg = htons(msg); 91 if (data && data_len) 92 memcpy(&ret->data, data, data_len); 93 return 0; 94 } 95 96 static int cp2615_init_i2c_msg(struct cp2615_iop_msg *ret, const struct cp2615_i2c_transfer *data) 97 { 98 return cp2615_init_iop_msg(ret, iop_DoI2cTransfer, data, 4 + data->write_len); 99 } 100 101 /* Translates status codes to Linux errno's */ 102 static int cp2615_check_status(enum cp2615_i2c_status status) 103 { 104 switch (status) { 105 case CP2615_SUCCESS: 106 return 0; 107 case CP2615_BUS_ERROR: 108 return -ENXIO; 109 case CP2615_BUS_BUSY: 110 return -EAGAIN; 111 case CP2615_TIMEOUT: 112 return -ETIMEDOUT; 113 case CP2615_INVALID_PARAM: 114 return -EINVAL; 115 case CP2615_CFG_LOCKED: 116 return -EPERM; 117 } 118 /* Unknown error code */ 119 return -EPROTO; 120 } 121 122 /** Driver code */ 123 124 static int 125 cp2615_i2c_send(struct usb_interface *usbif, struct cp2615_i2c_transfer *i2c_w) 126 { 127 struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL); 128 struct usb_device *usbdev = interface_to_usbdev(usbif); 129 int res = cp2615_init_i2c_msg(msg, i2c_w); 130 131 if (!res) 132 res = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, IOP_EP_OUT), 133 msg, ntohs(msg->length), NULL, 0); 134 kfree(msg); 135 return res; 136 } 137 138 static int 139 cp2615_i2c_recv(struct usb_interface *usbif, unsigned char tag, void *buf) 140 { 141 struct usb_device *usbdev = interface_to_usbdev(usbif); 142 struct cp2615_iop_msg *msg; 143 struct cp2615_i2c_transfer_result *i2c_r; 144 int res; 145 146 msg = kzalloc(sizeof(*msg), GFP_KERNEL); 147 if (!msg) 148 return -ENOMEM; 149 150 res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN), msg, 151 sizeof(struct cp2615_iop_msg), NULL, 0); 152 if (res < 0) { 153 kfree(msg); 154 return res; 155 } 156 157 i2c_r = (struct cp2615_i2c_transfer_result *)&msg->data; 158 if (msg->msg != htons(iop_I2cTransferResult) || i2c_r->tag != tag) { 159 kfree(msg); 160 return -EIO; 161 } 162 163 res = cp2615_check_status(i2c_r->status); 164 if (!res) 165 memcpy(buf, &i2c_r->data, i2c_r->read_len); 166 167 kfree(msg); 168 return res; 169 } 170 171 /* Checks if the IOP is functional by querying the part's ID */ 172 static int cp2615_check_iop(struct usb_interface *usbif) 173 { 174 struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL); 175 struct cp2615_iop_accessory_info *info = (struct cp2615_iop_accessory_info *)&msg->data; 176 struct usb_device *usbdev = interface_to_usbdev(usbif); 177 int res = cp2615_init_iop_msg(msg, iop_GetAccessoryInfo, NULL, 0); 178 179 if (res) 180 goto out; 181 182 res = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, IOP_EP_OUT), 183 msg, ntohs(msg->length), NULL, 0); 184 if (res) 185 goto out; 186 187 res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN), 188 msg, sizeof(struct cp2615_iop_msg), NULL, 0); 189 if (res) 190 goto out; 191 192 if (msg->msg != htons(iop_AccessoryInfo)) { 193 res = -EIO; 194 goto out; 195 } 196 197 switch (ntohs(info->part_id)) { 198 case PART_ID_A01: 199 dev_dbg(&usbif->dev, "Found A01 part. (WARNING: errata exists!)\n"); 200 break; 201 case PART_ID_A02: 202 dev_dbg(&usbif->dev, "Found good A02 part.\n"); 203 break; 204 default: 205 dev_warn(&usbif->dev, "Unknown part ID %04X\n", ntohs(info->part_id)); 206 } 207 208 out: 209 kfree(msg); 210 return res; 211 } 212 213 static int 214 cp2615_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) 215 { 216 struct usb_interface *usbif = adap->algo_data; 217 int i = 0, ret = 0; 218 struct i2c_msg *msg; 219 struct cp2615_i2c_transfer i2c_w = {0}; 220 221 dev_dbg(&usbif->dev, "Doing %d I2C transactions\n", num); 222 223 for (; !ret && i < num; i++) { 224 msg = &msgs[i]; 225 226 i2c_w.tag = 0xdd; 227 i2c_w.i2caddr = i2c_8bit_addr_from_msg(msg); 228 if (msg->flags & I2C_M_RD) { 229 i2c_w.read_len = msg->len; 230 i2c_w.write_len = 0; 231 } else { 232 i2c_w.read_len = 0; 233 i2c_w.write_len = msg->len; 234 memcpy(&i2c_w.data, msg->buf, i2c_w.write_len); 235 } 236 ret = cp2615_i2c_send(usbif, &i2c_w); 237 if (ret) 238 break; 239 ret = cp2615_i2c_recv(usbif, i2c_w.tag, msg->buf); 240 } 241 if (ret < 0) 242 return ret; 243 return i; 244 } 245 246 static u32 247 cp2615_i2c_func(struct i2c_adapter *adap) 248 { 249 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; 250 } 251 252 static const struct i2c_algorithm cp2615_i2c_algo = { 253 .master_xfer = cp2615_i2c_master_xfer, 254 .functionality = cp2615_i2c_func, 255 }; 256 257 /* 258 * This chip has some limitations: one is that the USB endpoint 259 * can only receive 64 bytes/transfer, that leaves 54 bytes for 260 * the I2C transfer. On top of that, EITHER read_len OR write_len 261 * may be zero, but not both. If both are non-zero, the adapter 262 * issues a write followed by a read. And the chip does not 263 * support repeated START between the write and read phases. 264 */ 265 static struct i2c_adapter_quirks cp2615_i2c_quirks = { 266 .max_write_len = MAX_I2C_SIZE, 267 .max_read_len = MAX_I2C_SIZE, 268 .flags = I2C_AQ_COMB_WRITE_THEN_READ | I2C_AQ_NO_ZERO_LEN | I2C_AQ_NO_REP_START, 269 .max_comb_1st_msg_len = MAX_I2C_SIZE, 270 .max_comb_2nd_msg_len = MAX_I2C_SIZE 271 }; 272 273 static void 274 cp2615_i2c_remove(struct usb_interface *usbif) 275 { 276 struct i2c_adapter *adap = usb_get_intfdata(usbif); 277 278 usb_set_intfdata(usbif, NULL); 279 i2c_del_adapter(adap); 280 } 281 282 static int 283 cp2615_i2c_probe(struct usb_interface *usbif, const struct usb_device_id *id) 284 { 285 int ret = 0; 286 struct i2c_adapter *adap; 287 struct usb_device *usbdev = interface_to_usbdev(usbif); 288 289 ret = usb_set_interface(usbdev, IOP_IFN, IOP_ALTSETTING); 290 if (ret) 291 return ret; 292 293 ret = cp2615_check_iop(usbif); 294 if (ret) 295 return ret; 296 297 adap = devm_kzalloc(&usbif->dev, sizeof(struct i2c_adapter), GFP_KERNEL); 298 if (!adap) 299 return -ENOMEM; 300 301 strncpy(adap->name, usbdev->serial, sizeof(adap->name) - 1); 302 adap->owner = THIS_MODULE; 303 adap->dev.parent = &usbif->dev; 304 adap->dev.of_node = usbif->dev.of_node; 305 adap->timeout = HZ; 306 adap->algo = &cp2615_i2c_algo; 307 adap->quirks = &cp2615_i2c_quirks; 308 adap->algo_data = usbif; 309 310 ret = i2c_add_adapter(adap); 311 if (ret) 312 return ret; 313 314 usb_set_intfdata(usbif, adap); 315 return 0; 316 } 317 318 static const struct usb_device_id id_table[] = { 319 { USB_DEVICE_INTERFACE_NUMBER(CP2615_VID, CP2615_PID, IOP_IFN) }, 320 { } 321 }; 322 323 MODULE_DEVICE_TABLE(usb, id_table); 324 325 static struct usb_driver cp2615_i2c_driver = { 326 .name = "i2c-cp2615", 327 .probe = cp2615_i2c_probe, 328 .disconnect = cp2615_i2c_remove, 329 .id_table = id_table, 330 }; 331 332 module_usb_driver(cp2615_i2c_driver); 333 334 MODULE_AUTHOR("Bence Csókás <bence98@sch.bme.hu>"); 335 MODULE_DESCRIPTION("CP2615 I2C bus driver"); 336 MODULE_LICENSE("GPL"); 337