1 /* 2 * Copyright (C) 2014 Broadcom Corporation 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation version 2. 7 * 8 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 9 * kind, whether express or implied; without even the implied warranty 10 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 */ 13 14 #include <linux/clk.h> 15 #include <linux/delay.h> 16 #include <linux/device.h> 17 #include <linux/i2c.h> 18 #include <linux/interrupt.h> 19 #include <linux/io.h> 20 #include <linux/kernel.h> 21 #include <linux/module.h> 22 #include <linux/platform_device.h> 23 #include <linux/sched.h> 24 #include <linux/slab.h> 25 #include <linux/version.h> 26 27 #define N_DATA_REGS 8 28 29 /* 30 * PER_I2C/BSC count register mask depends on 1 byte/4 byte data register 31 * size. Cable modem and DSL SoCs with Peripheral i2c cores use 1 byte per 32 * data register whereas STB SoCs use 4 byte per data register transfer, 33 * account for this difference in total count per transaction and mask to 34 * use. 35 */ 36 #define BSC_CNT_REG1_MASK(nb) (nb == 1 ? GENMASK(3, 0) : GENMASK(5, 0)) 37 #define BSC_CNT_REG1_SHIFT 0 38 39 /* BSC CTL register field definitions */ 40 #define BSC_CTL_REG_DTF_MASK 0x00000003 41 #define BSC_CTL_REG_SCL_SEL_MASK 0x00000030 42 #define BSC_CTL_REG_SCL_SEL_SHIFT 4 43 #define BSC_CTL_REG_INT_EN_MASK 0x00000040 44 #define BSC_CTL_REG_INT_EN_SHIFT 6 45 #define BSC_CTL_REG_DIV_CLK_MASK 0x00000080 46 47 /* BSC_IIC_ENABLE r/w enable and interrupt field definitions */ 48 #define BSC_IIC_EN_RESTART_MASK 0x00000040 49 #define BSC_IIC_EN_NOSTART_MASK 0x00000020 50 #define BSC_IIC_EN_NOSTOP_MASK 0x00000010 51 #define BSC_IIC_EN_NOACK_MASK 0x00000004 52 #define BSC_IIC_EN_INTRP_MASK 0x00000002 53 #define BSC_IIC_EN_ENABLE_MASK 0x00000001 54 55 /* BSC_CTLHI control register field definitions */ 56 #define BSC_CTLHI_REG_INPUT_SWITCHING_LEVEL_MASK 0x00000080 57 #define BSC_CTLHI_REG_DATAREG_SIZE_MASK 0x00000040 58 #define BSC_CTLHI_REG_IGNORE_ACK_MASK 0x00000002 59 #define BSC_CTLHI_REG_WAIT_DIS_MASK 0x00000001 60 61 #define I2C_TIMEOUT 100 /* msecs */ 62 63 /* Condition mask used for non combined transfer */ 64 #define COND_RESTART BSC_IIC_EN_RESTART_MASK 65 #define COND_NOSTART BSC_IIC_EN_NOSTART_MASK 66 #define COND_NOSTOP BSC_IIC_EN_NOSTOP_MASK 67 #define COND_START_STOP (COND_RESTART | COND_NOSTART | COND_NOSTOP) 68 69 /* BSC data transfer direction */ 70 #define DTF_WR_MASK 0x00000000 71 #define DTF_RD_MASK 0x00000001 72 /* BSC data transfer direction combined format */ 73 #define DTF_RD_WR_MASK 0x00000002 74 #define DTF_WR_RD_MASK 0x00000003 75 76 #define INT_ENABLE true 77 #define INT_DISABLE false 78 79 /* BSC block register map structure to cache fields to be written */ 80 struct bsc_regs { 81 u32 chip_address; /* slave address */ 82 u32 data_in[N_DATA_REGS]; /* tx data buffer*/ 83 u32 cnt_reg; /* rx/tx data length */ 84 u32 ctl_reg; /* control register */ 85 u32 iic_enable; /* xfer enable and status */ 86 u32 data_out[N_DATA_REGS]; /* rx data buffer */ 87 u32 ctlhi_reg; /* more control fields */ 88 u32 scl_param; /* reserved */ 89 }; 90 91 struct bsc_clk_param { 92 u32 hz; 93 u32 scl_mask; 94 u32 div_mask; 95 }; 96 97 enum bsc_xfer_cmd { 98 CMD_WR, 99 CMD_RD, 100 CMD_WR_NOACK, 101 CMD_RD_NOACK, 102 }; 103 104 static char const *cmd_string[] = { 105 [CMD_WR] = "WR", 106 [CMD_RD] = "RD", 107 [CMD_WR_NOACK] = "WR NOACK", 108 [CMD_RD_NOACK] = "RD NOACK", 109 }; 110 111 enum bus_speeds { 112 SPD_375K, 113 SPD_390K, 114 SPD_187K, 115 SPD_200K, 116 SPD_93K, 117 SPD_97K, 118 SPD_46K, 119 SPD_50K 120 }; 121 122 static const struct bsc_clk_param bsc_clk[] = { 123 [SPD_375K] = { 124 .hz = 375000, 125 .scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT, 126 .div_mask = 0 127 }, 128 [SPD_390K] = { 129 .hz = 390000, 130 .scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT, 131 .div_mask = 0 132 }, 133 [SPD_187K] = { 134 .hz = 187500, 135 .scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT, 136 .div_mask = 0 137 }, 138 [SPD_200K] = { 139 .hz = 200000, 140 .scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT, 141 .div_mask = 0 142 }, 143 [SPD_93K] = { 144 .hz = 93750, 145 .scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT, 146 .div_mask = BSC_CTL_REG_DIV_CLK_MASK 147 }, 148 [SPD_97K] = { 149 .hz = 97500, 150 .scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT, 151 .div_mask = BSC_CTL_REG_DIV_CLK_MASK 152 }, 153 [SPD_46K] = { 154 .hz = 46875, 155 .scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT, 156 .div_mask = BSC_CTL_REG_DIV_CLK_MASK 157 }, 158 [SPD_50K] = { 159 .hz = 50000, 160 .scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT, 161 .div_mask = BSC_CTL_REG_DIV_CLK_MASK 162 } 163 }; 164 165 struct brcmstb_i2c_dev { 166 struct device *device; 167 void __iomem *base; 168 int irq; 169 struct bsc_regs *bsc_regmap; 170 struct i2c_adapter adapter; 171 struct completion done; 172 u32 clk_freq_hz; 173 int data_regsz; 174 }; 175 176 /* register accessors for both be and le cpu arch */ 177 #ifdef CONFIG_CPU_BIG_ENDIAN 178 #define __bsc_readl(_reg) ioread32be(_reg) 179 #define __bsc_writel(_val, _reg) iowrite32be(_val, _reg) 180 #else 181 #define __bsc_readl(_reg) ioread32(_reg) 182 #define __bsc_writel(_val, _reg) iowrite32(_val, _reg) 183 #endif 184 185 #define bsc_readl(_dev, _reg) \ 186 __bsc_readl(_dev->base + offsetof(struct bsc_regs, _reg)) 187 188 #define bsc_writel(_dev, _val, _reg) \ 189 __bsc_writel(_val, _dev->base + offsetof(struct bsc_regs, _reg)) 190 191 static inline int brcmstb_i2c_get_xfersz(struct brcmstb_i2c_dev *dev) 192 { 193 return (N_DATA_REGS * dev->data_regsz); 194 } 195 196 static inline int brcmstb_i2c_get_data_regsz(struct brcmstb_i2c_dev *dev) 197 { 198 return dev->data_regsz; 199 } 200 201 static void brcmstb_i2c_enable_disable_irq(struct brcmstb_i2c_dev *dev, 202 bool int_en) 203 { 204 205 if (int_en) 206 /* Enable BSC CTL interrupt line */ 207 dev->bsc_regmap->ctl_reg |= BSC_CTL_REG_INT_EN_MASK; 208 else 209 /* Disable BSC CTL interrupt line */ 210 dev->bsc_regmap->ctl_reg &= ~BSC_CTL_REG_INT_EN_MASK; 211 212 barrier(); 213 bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg); 214 } 215 216 static irqreturn_t brcmstb_i2c_isr(int irq, void *devid) 217 { 218 struct brcmstb_i2c_dev *dev = devid; 219 u32 status_bsc_ctl = bsc_readl(dev, ctl_reg); 220 u32 status_iic_intrp = bsc_readl(dev, iic_enable); 221 222 dev_dbg(dev->device, "isr CTL_REG %x IIC_EN %x\n", 223 status_bsc_ctl, status_iic_intrp); 224 225 if (!(status_bsc_ctl & BSC_CTL_REG_INT_EN_MASK)) 226 return IRQ_NONE; 227 228 brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE); 229 complete(&dev->done); 230 231 dev_dbg(dev->device, "isr handled"); 232 return IRQ_HANDLED; 233 } 234 235 /* Wait for device to be ready */ 236 static int brcmstb_i2c_wait_if_busy(struct brcmstb_i2c_dev *dev) 237 { 238 unsigned long timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT); 239 240 while ((bsc_readl(dev, iic_enable) & BSC_IIC_EN_INTRP_MASK)) { 241 if (time_after(jiffies, timeout)) 242 return -ETIMEDOUT; 243 cpu_relax(); 244 } 245 return 0; 246 } 247 248 /* i2c xfer completion function, handles both irq and polling mode */ 249 static int brcmstb_i2c_wait_for_completion(struct brcmstb_i2c_dev *dev) 250 { 251 int ret = 0; 252 unsigned long timeout = msecs_to_jiffies(I2C_TIMEOUT); 253 254 if (dev->irq >= 0) { 255 if (!wait_for_completion_timeout(&dev->done, timeout)) 256 ret = -ETIMEDOUT; 257 } else { 258 /* we are in polling mode */ 259 u32 bsc_intrp; 260 unsigned long time_left = jiffies + timeout; 261 262 do { 263 bsc_intrp = bsc_readl(dev, iic_enable) & 264 BSC_IIC_EN_INTRP_MASK; 265 if (time_after(jiffies, time_left)) { 266 ret = -ETIMEDOUT; 267 break; 268 } 269 cpu_relax(); 270 } while (!bsc_intrp); 271 } 272 273 if (dev->irq < 0 || ret == -ETIMEDOUT) 274 brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE); 275 276 return ret; 277 } 278 279 /* Set xfer START/STOP conditions for subsequent transfer */ 280 static void brcmstb_set_i2c_start_stop(struct brcmstb_i2c_dev *dev, 281 u32 cond_flag) 282 { 283 u32 regval = dev->bsc_regmap->iic_enable; 284 285 dev->bsc_regmap->iic_enable = (regval & ~COND_START_STOP) | cond_flag; 286 } 287 288 /* Send I2C request check completion */ 289 static int brcmstb_send_i2c_cmd(struct brcmstb_i2c_dev *dev, 290 enum bsc_xfer_cmd cmd) 291 { 292 int rc = 0; 293 struct bsc_regs *pi2creg = dev->bsc_regmap; 294 295 /* Make sure the hardware is ready */ 296 rc = brcmstb_i2c_wait_if_busy(dev); 297 if (rc < 0) 298 return rc; 299 300 /* only if we are in interrupt mode */ 301 if (dev->irq >= 0) 302 reinit_completion(&dev->done); 303 304 /* enable BSC CTL interrupt line */ 305 brcmstb_i2c_enable_disable_irq(dev, INT_ENABLE); 306 307 /* initiate transfer by setting iic_enable */ 308 pi2creg->iic_enable |= BSC_IIC_EN_ENABLE_MASK; 309 bsc_writel(dev, pi2creg->iic_enable, iic_enable); 310 311 /* Wait for transaction to finish or timeout */ 312 rc = brcmstb_i2c_wait_for_completion(dev); 313 if (rc) { 314 dev_dbg(dev->device, "intr timeout for cmd %s\n", 315 cmd_string[cmd]); 316 goto cmd_out; 317 } 318 319 if ((cmd == CMD_RD || cmd == CMD_WR) && 320 bsc_readl(dev, iic_enable) & BSC_IIC_EN_NOACK_MASK) { 321 rc = -EREMOTEIO; 322 dev_dbg(dev->device, "controller received NOACK intr for %s\n", 323 cmd_string[cmd]); 324 } 325 326 cmd_out: 327 bsc_writel(dev, 0, cnt_reg); 328 bsc_writel(dev, 0, iic_enable); 329 330 return rc; 331 } 332 333 /* Actual data transfer through the BSC master */ 334 static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev, 335 u8 *buf, unsigned int len, 336 struct i2c_msg *pmsg) 337 { 338 int cnt, byte, i, rc; 339 enum bsc_xfer_cmd cmd; 340 u32 ctl_reg; 341 struct bsc_regs *pi2creg = dev->bsc_regmap; 342 int no_ack = pmsg->flags & I2C_M_IGNORE_NAK; 343 int data_regsz = brcmstb_i2c_get_data_regsz(dev); 344 345 /* see if the transaction needs to check NACK conditions */ 346 if (no_ack) { 347 cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD_NOACK 348 : CMD_WR_NOACK; 349 pi2creg->ctlhi_reg |= BSC_CTLHI_REG_IGNORE_ACK_MASK; 350 } else { 351 cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD : CMD_WR; 352 pi2creg->ctlhi_reg &= ~BSC_CTLHI_REG_IGNORE_ACK_MASK; 353 } 354 bsc_writel(dev, pi2creg->ctlhi_reg, ctlhi_reg); 355 356 /* set data transfer direction */ 357 ctl_reg = pi2creg->ctl_reg & ~BSC_CTL_REG_DTF_MASK; 358 if (cmd == CMD_WR || cmd == CMD_WR_NOACK) 359 pi2creg->ctl_reg = ctl_reg | DTF_WR_MASK; 360 else 361 pi2creg->ctl_reg = ctl_reg | DTF_RD_MASK; 362 363 /* set the read/write length */ 364 bsc_writel(dev, BSC_CNT_REG1_MASK(data_regsz) & 365 (len << BSC_CNT_REG1_SHIFT), cnt_reg); 366 367 /* Write data into data_in register */ 368 369 if (cmd == CMD_WR || cmd == CMD_WR_NOACK) { 370 for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) { 371 u32 word = 0; 372 373 for (byte = 0; byte < data_regsz; byte++) { 374 word >>= BITS_PER_BYTE; 375 if ((cnt + byte) < len) 376 word |= buf[cnt + byte] << 377 (BITS_PER_BYTE * (data_regsz - 1)); 378 } 379 bsc_writel(dev, word, data_in[i]); 380 } 381 } 382 383 /* Initiate xfer, the function will return on completion */ 384 rc = brcmstb_send_i2c_cmd(dev, cmd); 385 386 if (rc != 0) { 387 dev_dbg(dev->device, "%s failure", cmd_string[cmd]); 388 return rc; 389 } 390 391 /* Read data from data_out register */ 392 if (cmd == CMD_RD || cmd == CMD_RD_NOACK) { 393 for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) { 394 u32 data = bsc_readl(dev, data_out[i]); 395 396 for (byte = 0; byte < data_regsz && 397 (byte + cnt) < len; byte++) { 398 buf[cnt + byte] = data & 0xff; 399 data >>= BITS_PER_BYTE; 400 } 401 } 402 } 403 404 return 0; 405 } 406 407 /* Write a single byte of data to the i2c bus */ 408 static int brcmstb_i2c_write_data_byte(struct brcmstb_i2c_dev *dev, 409 u8 *buf, unsigned int nak_expected) 410 { 411 enum bsc_xfer_cmd cmd = nak_expected ? CMD_WR : CMD_WR_NOACK; 412 413 bsc_writel(dev, 1, cnt_reg); 414 bsc_writel(dev, *buf, data_in); 415 416 return brcmstb_send_i2c_cmd(dev, cmd); 417 } 418 419 /* Send i2c address */ 420 static int brcmstb_i2c_do_addr(struct brcmstb_i2c_dev *dev, 421 struct i2c_msg *msg) 422 { 423 unsigned char addr; 424 425 if (msg->flags & I2C_M_TEN) { 426 /* First byte is 11110XX0 where XX is upper 2 bits */ 427 addr = 0xF0 | ((msg->addr & 0x300) >> 7); 428 bsc_writel(dev, addr, chip_address); 429 430 /* Second byte is the remaining 8 bits */ 431 addr = msg->addr & 0xFF; 432 if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0) 433 return -EREMOTEIO; 434 435 if (msg->flags & I2C_M_RD) { 436 /* For read, send restart without stop condition */ 437 brcmstb_set_i2c_start_stop(dev, COND_RESTART 438 | COND_NOSTOP); 439 /* Then re-send the first byte with the read bit set */ 440 addr = 0xF0 | ((msg->addr & 0x300) >> 7) | 0x01; 441 if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0) 442 return -EREMOTEIO; 443 444 } 445 } else { 446 addr = i2c_8bit_addr_from_msg(msg); 447 448 bsc_writel(dev, addr, chip_address); 449 } 450 451 return 0; 452 } 453 454 /* Master transfer function */ 455 static int brcmstb_i2c_xfer(struct i2c_adapter *adapter, 456 struct i2c_msg msgs[], int num) 457 { 458 struct brcmstb_i2c_dev *dev = i2c_get_adapdata(adapter); 459 struct i2c_msg *pmsg; 460 int rc = 0; 461 int i; 462 int bytes_to_xfer; 463 u8 *tmp_buf; 464 int len = 0; 465 int xfersz = brcmstb_i2c_get_xfersz(dev); 466 u32 cond, cond_per_msg; 467 468 /* Loop through all messages */ 469 for (i = 0; i < num; i++) { 470 pmsg = &msgs[i]; 471 len = pmsg->len; 472 tmp_buf = pmsg->buf; 473 474 dev_dbg(dev->device, 475 "msg# %d/%d flg %x buf %x len %d\n", i, 476 num - 1, pmsg->flags, 477 pmsg->buf ? pmsg->buf[0] : '0', pmsg->len); 478 479 if (i < (num - 1) && (msgs[i + 1].flags & I2C_M_NOSTART)) 480 cond = ~COND_START_STOP; 481 else 482 cond = COND_RESTART | COND_NOSTOP; 483 484 brcmstb_set_i2c_start_stop(dev, cond); 485 486 /* Send slave address */ 487 if (!(pmsg->flags & I2C_M_NOSTART)) { 488 rc = brcmstb_i2c_do_addr(dev, pmsg); 489 if (rc < 0) { 490 dev_dbg(dev->device, 491 "NACK for addr %2.2x msg#%d rc = %d\n", 492 pmsg->addr, i, rc); 493 goto out; 494 } 495 } 496 497 cond_per_msg = cond; 498 499 /* Perform data transfer */ 500 while (len) { 501 bytes_to_xfer = min(len, xfersz); 502 503 if (len <= xfersz) { 504 if (i == (num - 1)) 505 cond_per_msg = cond_per_msg & 506 ~(COND_RESTART | COND_NOSTOP); 507 else 508 cond_per_msg = cond; 509 } else { 510 cond_per_msg = (cond_per_msg & ~COND_RESTART) | 511 COND_NOSTOP; 512 } 513 514 brcmstb_set_i2c_start_stop(dev, cond_per_msg); 515 516 rc = brcmstb_i2c_xfer_bsc_data(dev, tmp_buf, 517 bytes_to_xfer, pmsg); 518 if (rc < 0) 519 goto out; 520 521 len -= bytes_to_xfer; 522 tmp_buf += bytes_to_xfer; 523 524 cond_per_msg = COND_NOSTART | COND_NOSTOP; 525 } 526 } 527 528 rc = num; 529 out: 530 return rc; 531 532 } 533 534 static u32 brcmstb_i2c_functionality(struct i2c_adapter *adap) 535 { 536 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR 537 | I2C_FUNC_NOSTART | I2C_FUNC_PROTOCOL_MANGLING; 538 } 539 540 static const struct i2c_algorithm brcmstb_i2c_algo = { 541 .master_xfer = brcmstb_i2c_xfer, 542 .functionality = brcmstb_i2c_functionality, 543 }; 544 545 static void brcmstb_i2c_set_bus_speed(struct brcmstb_i2c_dev *dev) 546 { 547 int i = 0, num_speeds = ARRAY_SIZE(bsc_clk); 548 u32 clk_freq_hz = dev->clk_freq_hz; 549 550 for (i = 0; i < num_speeds; i++) { 551 if (bsc_clk[i].hz == clk_freq_hz) { 552 dev->bsc_regmap->ctl_reg &= ~(BSC_CTL_REG_SCL_SEL_MASK 553 | BSC_CTL_REG_DIV_CLK_MASK); 554 dev->bsc_regmap->ctl_reg |= (bsc_clk[i].scl_mask | 555 bsc_clk[i].div_mask); 556 bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg); 557 break; 558 } 559 } 560 561 /* in case we did not get find a valid speed */ 562 if (i == num_speeds) { 563 i = (bsc_readl(dev, ctl_reg) & BSC_CTL_REG_SCL_SEL_MASK) >> 564 BSC_CTL_REG_SCL_SEL_SHIFT; 565 dev_warn(dev->device, "leaving current clock-frequency @ %dHz\n", 566 bsc_clk[i].hz); 567 } 568 } 569 570 static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev) 571 { 572 if (brcmstb_i2c_get_data_regsz(dev) == sizeof(u32)) 573 /* set 4 byte data in/out xfers */ 574 dev->bsc_regmap->ctlhi_reg = BSC_CTLHI_REG_DATAREG_SIZE_MASK; 575 else 576 dev->bsc_regmap->ctlhi_reg &= ~BSC_CTLHI_REG_DATAREG_SIZE_MASK; 577 578 bsc_writel(dev, dev->bsc_regmap->ctlhi_reg, ctlhi_reg); 579 /* set bus speed */ 580 brcmstb_i2c_set_bus_speed(dev); 581 } 582 583 #define AUTOI2C_CTRL0 0x26c 584 #define AUTOI2C_CTRL0_RELEASE_BSC BIT(1) 585 586 static int bcm2711_release_bsc(struct brcmstb_i2c_dev *dev) 587 { 588 struct platform_device *pdev = to_platform_device(dev->device); 589 struct resource *iomem; 590 void __iomem *autoi2c; 591 592 /* Map hardware registers */ 593 iomem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "auto-i2c"); 594 autoi2c = devm_ioremap_resource(&pdev->dev, iomem); 595 if (IS_ERR(autoi2c)) 596 return PTR_ERR(autoi2c); 597 598 writel(AUTOI2C_CTRL0_RELEASE_BSC, autoi2c + AUTOI2C_CTRL0); 599 devm_iounmap(&pdev->dev, autoi2c); 600 601 /* We need to reset the controller after the release */ 602 dev->bsc_regmap->iic_enable = 0; 603 bsc_writel(dev, dev->bsc_regmap->iic_enable, iic_enable); 604 605 return 0; 606 } 607 608 static int brcmstb_i2c_probe(struct platform_device *pdev) 609 { 610 int rc = 0; 611 struct brcmstb_i2c_dev *dev; 612 struct i2c_adapter *adap; 613 struct resource *iomem; 614 const char *int_name; 615 616 /* Allocate memory for private data structure */ 617 dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); 618 if (!dev) 619 return -ENOMEM; 620 621 dev->bsc_regmap = devm_kzalloc(&pdev->dev, sizeof(*dev->bsc_regmap), GFP_KERNEL); 622 if (!dev->bsc_regmap) 623 return -ENOMEM; 624 625 platform_set_drvdata(pdev, dev); 626 dev->device = &pdev->dev; 627 init_completion(&dev->done); 628 629 /* Map hardware registers */ 630 iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 631 dev->base = devm_ioremap_resource(dev->device, iomem); 632 if (IS_ERR(dev->base)) { 633 rc = -ENOMEM; 634 goto probe_errorout; 635 } 636 637 if (of_device_is_compatible(dev->device->of_node, 638 "brcm,bcm2711-hdmi-i2c")) { 639 rc = bcm2711_release_bsc(dev); 640 if (rc) 641 goto probe_errorout; 642 } 643 644 rc = of_property_read_string(dev->device->of_node, "interrupt-names", 645 &int_name); 646 if (rc < 0) 647 int_name = NULL; 648 649 /* Get the interrupt number */ 650 dev->irq = platform_get_irq_optional(pdev, 0); 651 652 /* disable the bsc interrupt line */ 653 brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE); 654 655 /* register the ISR handler */ 656 if (dev->irq >= 0) { 657 rc = devm_request_irq(&pdev->dev, dev->irq, brcmstb_i2c_isr, 658 IRQF_SHARED, 659 int_name ? int_name : pdev->name, 660 dev); 661 662 if (rc) { 663 dev_dbg(dev->device, "falling back to polling mode"); 664 dev->irq = -1; 665 } 666 } 667 668 if (of_property_read_u32(dev->device->of_node, 669 "clock-frequency", &dev->clk_freq_hz)) { 670 dev_warn(dev->device, "setting clock-frequency@%dHz\n", 671 bsc_clk[0].hz); 672 dev->clk_freq_hz = bsc_clk[0].hz; 673 } 674 675 /* set the data in/out register size for compatible SoCs */ 676 if (of_device_is_compatible(dev->device->of_node, 677 "brcmstb,brcmper-i2c")) 678 dev->data_regsz = sizeof(u8); 679 else 680 dev->data_regsz = sizeof(u32); 681 682 brcmstb_i2c_set_bsc_reg_defaults(dev); 683 684 /* Add the i2c adapter */ 685 adap = &dev->adapter; 686 i2c_set_adapdata(adap, dev); 687 adap->owner = THIS_MODULE; 688 strlcpy(adap->name, "Broadcom STB : ", sizeof(adap->name)); 689 if (int_name) 690 strlcat(adap->name, int_name, sizeof(adap->name)); 691 adap->algo = &brcmstb_i2c_algo; 692 adap->dev.parent = &pdev->dev; 693 adap->dev.of_node = pdev->dev.of_node; 694 rc = i2c_add_adapter(adap); 695 if (rc) 696 goto probe_errorout; 697 698 dev_info(dev->device, "%s@%dhz registered in %s mode\n", 699 int_name ? int_name : " ", dev->clk_freq_hz, 700 (dev->irq >= 0) ? "interrupt" : "polling"); 701 702 return 0; 703 704 probe_errorout: 705 return rc; 706 } 707 708 static int brcmstb_i2c_remove(struct platform_device *pdev) 709 { 710 struct brcmstb_i2c_dev *dev = platform_get_drvdata(pdev); 711 712 i2c_del_adapter(&dev->adapter); 713 return 0; 714 } 715 716 #ifdef CONFIG_PM_SLEEP 717 static int brcmstb_i2c_suspend(struct device *dev) 718 { 719 struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev); 720 721 i2c_mark_adapter_suspended(&i2c_dev->adapter); 722 return 0; 723 } 724 725 static int brcmstb_i2c_resume(struct device *dev) 726 { 727 struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev); 728 729 brcmstb_i2c_set_bsc_reg_defaults(i2c_dev); 730 i2c_mark_adapter_resumed(&i2c_dev->adapter); 731 732 return 0; 733 } 734 #endif 735 736 static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend, 737 brcmstb_i2c_resume); 738 739 static const struct of_device_id brcmstb_i2c_of_match[] = { 740 {.compatible = "brcm,brcmstb-i2c"}, 741 {.compatible = "brcm,brcmper-i2c"}, 742 {.compatible = "brcm,bcm2711-hdmi-i2c"}, 743 {}, 744 }; 745 MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match); 746 747 static struct platform_driver brcmstb_i2c_driver = { 748 .driver = { 749 .name = "brcmstb-i2c", 750 .of_match_table = brcmstb_i2c_of_match, 751 .pm = &brcmstb_i2c_pm, 752 }, 753 .probe = brcmstb_i2c_probe, 754 .remove = brcmstb_i2c_remove, 755 }; 756 module_platform_driver(brcmstb_i2c_driver); 757 758 MODULE_AUTHOR("Kamal Dasu <kdasu@broadcom.com>"); 759 MODULE_DESCRIPTION("Broadcom Settop I2C Driver"); 760 MODULE_LICENSE("GPL v2"); 761