1 // SPDX-License-Identifier: GPL-2.0-only
2 // Copyright (C) 2014 Broadcom Corporation
3
4 #include <linux/clk.h>
5 #include <linux/delay.h>
6 #include <linux/device.h>
7 #include <linux/i2c.h>
8 #include <linux/interrupt.h>
9 #include <linux/io.h>
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/platform_device.h>
13 #include <linux/sched.h>
14 #include <linux/slab.h>
15
16 #define N_DATA_REGS 8
17
18 /*
19 * PER_I2C/BSC count register mask depends on 1 byte/4 byte data register
20 * size. Cable modem and DSL SoCs with Peripheral i2c cores use 1 byte per
21 * data register whereas STB SoCs use 4 byte per data register transfer,
22 * account for this difference in total count per transaction and mask to
23 * use.
24 */
25 #define BSC_CNT_REG1_MASK(nb) (nb == 1 ? GENMASK(3, 0) : GENMASK(5, 0))
26 #define BSC_CNT_REG1_SHIFT 0
27
28 /* BSC CTL register field definitions */
29 #define BSC_CTL_REG_DTF_MASK 0x00000003
30 #define BSC_CTL_REG_SCL_SEL_MASK 0x00000030
31 #define BSC_CTL_REG_SCL_SEL_SHIFT 4
32 #define BSC_CTL_REG_INT_EN_MASK 0x00000040
33 #define BSC_CTL_REG_INT_EN_SHIFT 6
34 #define BSC_CTL_REG_DIV_CLK_MASK 0x00000080
35
36 /* BSC_IIC_ENABLE r/w enable and interrupt field definitions */
37 #define BSC_IIC_EN_RESTART_MASK 0x00000040
38 #define BSC_IIC_EN_NOSTART_MASK 0x00000020
39 #define BSC_IIC_EN_NOSTOP_MASK 0x00000010
40 #define BSC_IIC_EN_NOACK_MASK 0x00000004
41 #define BSC_IIC_EN_INTRP_MASK 0x00000002
42 #define BSC_IIC_EN_ENABLE_MASK 0x00000001
43
44 /* BSC_CTLHI control register field definitions */
45 #define BSC_CTLHI_REG_INPUT_SWITCHING_LEVEL_MASK 0x00000080
46 #define BSC_CTLHI_REG_DATAREG_SIZE_MASK 0x00000040
47 #define BSC_CTLHI_REG_IGNORE_ACK_MASK 0x00000002
48 #define BSC_CTLHI_REG_WAIT_DIS_MASK 0x00000001
49
50 #define I2C_TIMEOUT 100 /* msecs */
51
52 /* Condition mask used for non combined transfer */
53 #define COND_RESTART BSC_IIC_EN_RESTART_MASK
54 #define COND_NOSTART BSC_IIC_EN_NOSTART_MASK
55 #define COND_NOSTOP BSC_IIC_EN_NOSTOP_MASK
56 #define COND_START_STOP (COND_RESTART | COND_NOSTART | COND_NOSTOP)
57
58 /* BSC data transfer direction */
59 #define DTF_WR_MASK 0x00000000
60 #define DTF_RD_MASK 0x00000001
61 /* BSC data transfer direction combined format */
62 #define DTF_RD_WR_MASK 0x00000002
63 #define DTF_WR_RD_MASK 0x00000003
64
65 #define INT_ENABLE true
66 #define INT_DISABLE false
67
68 /* BSC block register map structure to cache fields to be written */
69 struct bsc_regs {
70 u32 chip_address; /* slave address */
71 u32 data_in[N_DATA_REGS]; /* tx data buffer*/
72 u32 cnt_reg; /* rx/tx data length */
73 u32 ctl_reg; /* control register */
74 u32 iic_enable; /* xfer enable and status */
75 u32 data_out[N_DATA_REGS]; /* rx data buffer */
76 u32 ctlhi_reg; /* more control fields */
77 u32 scl_param; /* reserved */
78 };
79
80 struct bsc_clk_param {
81 u32 hz;
82 u32 scl_mask;
83 u32 div_mask;
84 };
85
86 enum bsc_xfer_cmd {
87 CMD_WR,
88 CMD_RD,
89 CMD_WR_NOACK,
90 CMD_RD_NOACK,
91 };
92
93 static char const *cmd_string[] = {
94 [CMD_WR] = "WR",
95 [CMD_RD] = "RD",
96 [CMD_WR_NOACK] = "WR NOACK",
97 [CMD_RD_NOACK] = "RD NOACK",
98 };
99
100 enum bus_speeds {
101 SPD_375K,
102 SPD_390K,
103 SPD_187K,
104 SPD_200K,
105 SPD_93K,
106 SPD_97K,
107 SPD_46K,
108 SPD_50K
109 };
110
111 static const struct bsc_clk_param bsc_clk[] = {
112 [SPD_375K] = {
113 .hz = 375000,
114 .scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT,
115 .div_mask = 0
116 },
117 [SPD_390K] = {
118 .hz = 390000,
119 .scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT,
120 .div_mask = 0
121 },
122 [SPD_187K] = {
123 .hz = 187500,
124 .scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT,
125 .div_mask = 0
126 },
127 [SPD_200K] = {
128 .hz = 200000,
129 .scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT,
130 .div_mask = 0
131 },
132 [SPD_93K] = {
133 .hz = 93750,
134 .scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT,
135 .div_mask = BSC_CTL_REG_DIV_CLK_MASK
136 },
137 [SPD_97K] = {
138 .hz = 97500,
139 .scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT,
140 .div_mask = BSC_CTL_REG_DIV_CLK_MASK
141 },
142 [SPD_46K] = {
143 .hz = 46875,
144 .scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT,
145 .div_mask = BSC_CTL_REG_DIV_CLK_MASK
146 },
147 [SPD_50K] = {
148 .hz = 50000,
149 .scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT,
150 .div_mask = BSC_CTL_REG_DIV_CLK_MASK
151 }
152 };
153
154 struct brcmstb_i2c_dev {
155 struct device *device;
156 void __iomem *base;
157 int irq;
158 struct bsc_regs *bsc_regmap;
159 struct i2c_adapter adapter;
160 struct completion done;
161 u32 clk_freq_hz;
162 int data_regsz;
163 };
164
165 /* register accessors for both be and le cpu arch */
166 #ifdef CONFIG_CPU_BIG_ENDIAN
167 #define __bsc_readl(_reg) ioread32be(_reg)
168 #define __bsc_writel(_val, _reg) iowrite32be(_val, _reg)
169 #else
170 #define __bsc_readl(_reg) ioread32(_reg)
171 #define __bsc_writel(_val, _reg) iowrite32(_val, _reg)
172 #endif
173
174 #define bsc_readl(_dev, _reg) \
175 __bsc_readl(_dev->base + offsetof(struct bsc_regs, _reg))
176
177 #define bsc_writel(_dev, _val, _reg) \
178 __bsc_writel(_val, _dev->base + offsetof(struct bsc_regs, _reg))
179
brcmstb_i2c_get_xfersz(struct brcmstb_i2c_dev * dev)180 static inline int brcmstb_i2c_get_xfersz(struct brcmstb_i2c_dev *dev)
181 {
182 return (N_DATA_REGS * dev->data_regsz);
183 }
184
brcmstb_i2c_get_data_regsz(struct brcmstb_i2c_dev * dev)185 static inline int brcmstb_i2c_get_data_regsz(struct brcmstb_i2c_dev *dev)
186 {
187 return dev->data_regsz;
188 }
189
brcmstb_i2c_enable_disable_irq(struct brcmstb_i2c_dev * dev,bool int_en)190 static void brcmstb_i2c_enable_disable_irq(struct brcmstb_i2c_dev *dev,
191 bool int_en)
192 {
193
194 if (int_en)
195 /* Enable BSC CTL interrupt line */
196 dev->bsc_regmap->ctl_reg |= BSC_CTL_REG_INT_EN_MASK;
197 else
198 /* Disable BSC CTL interrupt line */
199 dev->bsc_regmap->ctl_reg &= ~BSC_CTL_REG_INT_EN_MASK;
200
201 barrier();
202 bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg);
203 }
204
brcmstb_i2c_isr(int irq,void * devid)205 static irqreturn_t brcmstb_i2c_isr(int irq, void *devid)
206 {
207 struct brcmstb_i2c_dev *dev = devid;
208 u32 status_bsc_ctl = bsc_readl(dev, ctl_reg);
209 u32 status_iic_intrp = bsc_readl(dev, iic_enable);
210
211 dev_dbg(dev->device, "isr CTL_REG %x IIC_EN %x\n",
212 status_bsc_ctl, status_iic_intrp);
213
214 if (!(status_bsc_ctl & BSC_CTL_REG_INT_EN_MASK))
215 return IRQ_NONE;
216
217 brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
218 complete(&dev->done);
219
220 dev_dbg(dev->device, "isr handled");
221 return IRQ_HANDLED;
222 }
223
224 /* Wait for device to be ready */
brcmstb_i2c_wait_if_busy(struct brcmstb_i2c_dev * dev)225 static int brcmstb_i2c_wait_if_busy(struct brcmstb_i2c_dev *dev)
226 {
227 unsigned long timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT);
228
229 while ((bsc_readl(dev, iic_enable) & BSC_IIC_EN_INTRP_MASK)) {
230 if (time_after(jiffies, timeout))
231 return -ETIMEDOUT;
232 cpu_relax();
233 }
234 return 0;
235 }
236
237 /* i2c xfer completion function, handles both irq and polling mode */
brcmstb_i2c_wait_for_completion(struct brcmstb_i2c_dev * dev)238 static int brcmstb_i2c_wait_for_completion(struct brcmstb_i2c_dev *dev)
239 {
240 int ret = 0;
241 unsigned long timeout = msecs_to_jiffies(I2C_TIMEOUT);
242
243 if (dev->irq >= 0) {
244 if (!wait_for_completion_timeout(&dev->done, timeout))
245 ret = -ETIMEDOUT;
246 } else {
247 /* we are in polling mode */
248 u32 bsc_intrp;
249 unsigned long time_left = jiffies + timeout;
250
251 do {
252 bsc_intrp = bsc_readl(dev, iic_enable) &
253 BSC_IIC_EN_INTRP_MASK;
254 if (time_after(jiffies, time_left)) {
255 ret = -ETIMEDOUT;
256 break;
257 }
258 cpu_relax();
259 } while (!bsc_intrp);
260 }
261
262 if (dev->irq < 0 || ret == -ETIMEDOUT)
263 brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
264
265 return ret;
266 }
267
268 /* Set xfer START/STOP conditions for subsequent transfer */
brcmstb_set_i2c_start_stop(struct brcmstb_i2c_dev * dev,u32 cond_flag)269 static void brcmstb_set_i2c_start_stop(struct brcmstb_i2c_dev *dev,
270 u32 cond_flag)
271 {
272 u32 regval = dev->bsc_regmap->iic_enable;
273
274 dev->bsc_regmap->iic_enable = (regval & ~COND_START_STOP) | cond_flag;
275 }
276
277 /* Send I2C request check completion */
brcmstb_send_i2c_cmd(struct brcmstb_i2c_dev * dev,enum bsc_xfer_cmd cmd)278 static int brcmstb_send_i2c_cmd(struct brcmstb_i2c_dev *dev,
279 enum bsc_xfer_cmd cmd)
280 {
281 int rc = 0;
282 struct bsc_regs *pi2creg = dev->bsc_regmap;
283
284 /* Make sure the hardware is ready */
285 rc = brcmstb_i2c_wait_if_busy(dev);
286 if (rc < 0)
287 return rc;
288
289 /* only if we are in interrupt mode */
290 if (dev->irq >= 0)
291 reinit_completion(&dev->done);
292
293 /* enable BSC CTL interrupt line */
294 brcmstb_i2c_enable_disable_irq(dev, INT_ENABLE);
295
296 /* initiate transfer by setting iic_enable */
297 pi2creg->iic_enable |= BSC_IIC_EN_ENABLE_MASK;
298 bsc_writel(dev, pi2creg->iic_enable, iic_enable);
299
300 /* Wait for transaction to finish or timeout */
301 rc = brcmstb_i2c_wait_for_completion(dev);
302 if (rc) {
303 dev_dbg(dev->device, "intr timeout for cmd %s\n",
304 cmd_string[cmd]);
305 goto cmd_out;
306 }
307
308 if ((cmd == CMD_RD || cmd == CMD_WR) &&
309 bsc_readl(dev, iic_enable) & BSC_IIC_EN_NOACK_MASK) {
310 rc = -EREMOTEIO;
311 dev_dbg(dev->device, "controller received NOACK intr for %s\n",
312 cmd_string[cmd]);
313 }
314
315 cmd_out:
316 bsc_writel(dev, 0, cnt_reg);
317 bsc_writel(dev, 0, iic_enable);
318
319 return rc;
320 }
321
322 /* Actual data transfer through the BSC master */
brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev * dev,u8 * buf,unsigned int len,struct i2c_msg * pmsg)323 static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev,
324 u8 *buf, unsigned int len,
325 struct i2c_msg *pmsg)
326 {
327 int cnt, byte, i, rc;
328 enum bsc_xfer_cmd cmd;
329 u32 ctl_reg;
330 struct bsc_regs *pi2creg = dev->bsc_regmap;
331 int no_ack = pmsg->flags & I2C_M_IGNORE_NAK;
332 int data_regsz = brcmstb_i2c_get_data_regsz(dev);
333
334 /* see if the transaction needs to check NACK conditions */
335 if (no_ack) {
336 cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD_NOACK
337 : CMD_WR_NOACK;
338 pi2creg->ctlhi_reg |= BSC_CTLHI_REG_IGNORE_ACK_MASK;
339 } else {
340 cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD : CMD_WR;
341 pi2creg->ctlhi_reg &= ~BSC_CTLHI_REG_IGNORE_ACK_MASK;
342 }
343 bsc_writel(dev, pi2creg->ctlhi_reg, ctlhi_reg);
344
345 /* set data transfer direction */
346 ctl_reg = pi2creg->ctl_reg & ~BSC_CTL_REG_DTF_MASK;
347 if (cmd == CMD_WR || cmd == CMD_WR_NOACK)
348 pi2creg->ctl_reg = ctl_reg | DTF_WR_MASK;
349 else
350 pi2creg->ctl_reg = ctl_reg | DTF_RD_MASK;
351
352 /* set the read/write length */
353 bsc_writel(dev, BSC_CNT_REG1_MASK(data_regsz) &
354 (len << BSC_CNT_REG1_SHIFT), cnt_reg);
355
356 /* Write data into data_in register */
357
358 if (cmd == CMD_WR || cmd == CMD_WR_NOACK) {
359 for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) {
360 u32 word = 0;
361
362 for (byte = 0; byte < data_regsz; byte++) {
363 word >>= BITS_PER_BYTE;
364 if ((cnt + byte) < len)
365 word |= buf[cnt + byte] <<
366 (BITS_PER_BYTE * (data_regsz - 1));
367 }
368 bsc_writel(dev, word, data_in[i]);
369 }
370 }
371
372 /* Initiate xfer, the function will return on completion */
373 rc = brcmstb_send_i2c_cmd(dev, cmd);
374
375 if (rc != 0) {
376 dev_dbg(dev->device, "%s failure", cmd_string[cmd]);
377 return rc;
378 }
379
380 /* Read data from data_out register */
381 if (cmd == CMD_RD || cmd == CMD_RD_NOACK) {
382 for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) {
383 u32 data = bsc_readl(dev, data_out[i]);
384
385 for (byte = 0; byte < data_regsz &&
386 (byte + cnt) < len; byte++) {
387 buf[cnt + byte] = data & 0xff;
388 data >>= BITS_PER_BYTE;
389 }
390 }
391 }
392
393 return 0;
394 }
395
396 /* Write a single byte of data to the i2c bus */
brcmstb_i2c_write_data_byte(struct brcmstb_i2c_dev * dev,u8 * buf,unsigned int nak_expected)397 static int brcmstb_i2c_write_data_byte(struct brcmstb_i2c_dev *dev,
398 u8 *buf, unsigned int nak_expected)
399 {
400 enum bsc_xfer_cmd cmd = nak_expected ? CMD_WR : CMD_WR_NOACK;
401
402 bsc_writel(dev, 1, cnt_reg);
403 bsc_writel(dev, *buf, data_in);
404
405 return brcmstb_send_i2c_cmd(dev, cmd);
406 }
407
408 /* Send i2c address */
brcmstb_i2c_do_addr(struct brcmstb_i2c_dev * dev,struct i2c_msg * msg)409 static int brcmstb_i2c_do_addr(struct brcmstb_i2c_dev *dev,
410 struct i2c_msg *msg)
411 {
412 unsigned char addr;
413
414 if (msg->flags & I2C_M_TEN) {
415 /* First byte is 11110XX0 where XX is upper 2 bits */
416 addr = 0xF0 | ((msg->addr & 0x300) >> 7);
417 bsc_writel(dev, addr, chip_address);
418
419 /* Second byte is the remaining 8 bits */
420 addr = msg->addr & 0xFF;
421 if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0)
422 return -EREMOTEIO;
423
424 if (msg->flags & I2C_M_RD) {
425 /* For read, send restart without stop condition */
426 brcmstb_set_i2c_start_stop(dev, COND_RESTART
427 | COND_NOSTOP);
428 /* Then re-send the first byte with the read bit set */
429 addr = 0xF0 | ((msg->addr & 0x300) >> 7) | 0x01;
430 if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0)
431 return -EREMOTEIO;
432
433 }
434 } else {
435 addr = i2c_8bit_addr_from_msg(msg);
436
437 bsc_writel(dev, addr, chip_address);
438 }
439
440 return 0;
441 }
442
443 /* Master transfer function */
brcmstb_i2c_xfer(struct i2c_adapter * adapter,struct i2c_msg msgs[],int num)444 static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
445 struct i2c_msg msgs[], int num)
446 {
447 struct brcmstb_i2c_dev *dev = i2c_get_adapdata(adapter);
448 struct i2c_msg *pmsg;
449 int rc = 0;
450 int i;
451 int bytes_to_xfer;
452 u8 *tmp_buf;
453 int len = 0;
454 int xfersz = brcmstb_i2c_get_xfersz(dev);
455 u32 cond, cond_per_msg;
456
457 /* Loop through all messages */
458 for (i = 0; i < num; i++) {
459 pmsg = &msgs[i];
460 len = pmsg->len;
461 tmp_buf = pmsg->buf;
462
463 dev_dbg(dev->device,
464 "msg# %d/%d flg %x buf %x len %d\n", i,
465 num - 1, pmsg->flags,
466 pmsg->buf ? pmsg->buf[0] : '0', pmsg->len);
467
468 if (i < (num - 1) && (msgs[i + 1].flags & I2C_M_NOSTART))
469 cond = ~COND_START_STOP;
470 else
471 cond = COND_RESTART | COND_NOSTOP;
472
473 brcmstb_set_i2c_start_stop(dev, cond);
474
475 /* Send slave address */
476 if (!(pmsg->flags & I2C_M_NOSTART)) {
477 rc = brcmstb_i2c_do_addr(dev, pmsg);
478 if (rc < 0) {
479 dev_dbg(dev->device,
480 "NACK for addr %2.2x msg#%d rc = %d\n",
481 pmsg->addr, i, rc);
482 goto out;
483 }
484 }
485
486 cond_per_msg = cond;
487
488 /* Perform data transfer */
489 while (len) {
490 bytes_to_xfer = min(len, xfersz);
491
492 if (len <= xfersz) {
493 if (i == (num - 1))
494 cond_per_msg = cond_per_msg &
495 ~(COND_RESTART | COND_NOSTOP);
496 else
497 cond_per_msg = cond;
498 } else {
499 cond_per_msg = (cond_per_msg & ~COND_RESTART) |
500 COND_NOSTOP;
501 }
502
503 brcmstb_set_i2c_start_stop(dev, cond_per_msg);
504
505 rc = brcmstb_i2c_xfer_bsc_data(dev, tmp_buf,
506 bytes_to_xfer, pmsg);
507 if (rc < 0)
508 goto out;
509
510 len -= bytes_to_xfer;
511 tmp_buf += bytes_to_xfer;
512
513 cond_per_msg = COND_NOSTART | COND_NOSTOP;
514 }
515 }
516
517 rc = num;
518 out:
519 return rc;
520
521 }
522
brcmstb_i2c_functionality(struct i2c_adapter * adap)523 static u32 brcmstb_i2c_functionality(struct i2c_adapter *adap)
524 {
525 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR
526 | I2C_FUNC_NOSTART | I2C_FUNC_PROTOCOL_MANGLING;
527 }
528
529 static const struct i2c_algorithm brcmstb_i2c_algo = {
530 .master_xfer = brcmstb_i2c_xfer,
531 .functionality = brcmstb_i2c_functionality,
532 };
533
brcmstb_i2c_set_bus_speed(struct brcmstb_i2c_dev * dev)534 static void brcmstb_i2c_set_bus_speed(struct brcmstb_i2c_dev *dev)
535 {
536 int i = 0, num_speeds = ARRAY_SIZE(bsc_clk);
537 u32 clk_freq_hz = dev->clk_freq_hz;
538
539 for (i = 0; i < num_speeds; i++) {
540 if (bsc_clk[i].hz == clk_freq_hz) {
541 dev->bsc_regmap->ctl_reg &= ~(BSC_CTL_REG_SCL_SEL_MASK
542 | BSC_CTL_REG_DIV_CLK_MASK);
543 dev->bsc_regmap->ctl_reg |= (bsc_clk[i].scl_mask |
544 bsc_clk[i].div_mask);
545 bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg);
546 break;
547 }
548 }
549
550 /* in case we did not get find a valid speed */
551 if (i == num_speeds) {
552 i = (bsc_readl(dev, ctl_reg) & BSC_CTL_REG_SCL_SEL_MASK) >>
553 BSC_CTL_REG_SCL_SEL_SHIFT;
554 dev_warn(dev->device, "leaving current clock-frequency @ %dHz\n",
555 bsc_clk[i].hz);
556 }
557 }
558
brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev * dev)559 static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev)
560 {
561 if (brcmstb_i2c_get_data_regsz(dev) == sizeof(u32))
562 /* set 4 byte data in/out xfers */
563 dev->bsc_regmap->ctlhi_reg = BSC_CTLHI_REG_DATAREG_SIZE_MASK;
564 else
565 dev->bsc_regmap->ctlhi_reg &= ~BSC_CTLHI_REG_DATAREG_SIZE_MASK;
566
567 bsc_writel(dev, dev->bsc_regmap->ctlhi_reg, ctlhi_reg);
568 /* set bus speed */
569 brcmstb_i2c_set_bus_speed(dev);
570 }
571
572 #define AUTOI2C_CTRL0 0x26c
573 #define AUTOI2C_CTRL0_RELEASE_BSC BIT(1)
574
bcm2711_release_bsc(struct brcmstb_i2c_dev * dev)575 static int bcm2711_release_bsc(struct brcmstb_i2c_dev *dev)
576 {
577 struct platform_device *pdev = to_platform_device(dev->device);
578 void __iomem *autoi2c;
579
580 /* Map hardware registers */
581 autoi2c = devm_platform_ioremap_resource_byname(pdev, "auto-i2c");
582 if (IS_ERR(autoi2c))
583 return PTR_ERR(autoi2c);
584
585 writel(AUTOI2C_CTRL0_RELEASE_BSC, autoi2c + AUTOI2C_CTRL0);
586 devm_iounmap(&pdev->dev, autoi2c);
587
588 /* We need to reset the controller after the release */
589 dev->bsc_regmap->iic_enable = 0;
590 bsc_writel(dev, dev->bsc_regmap->iic_enable, iic_enable);
591
592 return 0;
593 }
594
brcmstb_i2c_probe(struct platform_device * pdev)595 static int brcmstb_i2c_probe(struct platform_device *pdev)
596 {
597 struct brcmstb_i2c_dev *dev;
598 struct i2c_adapter *adap;
599 const char *int_name;
600 int rc;
601
602 /* Allocate memory for private data structure */
603 dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
604 if (!dev)
605 return -ENOMEM;
606
607 dev->bsc_regmap = devm_kzalloc(&pdev->dev, sizeof(*dev->bsc_regmap), GFP_KERNEL);
608 if (!dev->bsc_regmap)
609 return -ENOMEM;
610
611 platform_set_drvdata(pdev, dev);
612 dev->device = &pdev->dev;
613 init_completion(&dev->done);
614
615 /* Map hardware registers */
616 dev->base = devm_platform_ioremap_resource(pdev, 0);
617 if (IS_ERR(dev->base))
618 return PTR_ERR(dev->base);
619
620 if (of_device_is_compatible(dev->device->of_node,
621 "brcm,bcm2711-hdmi-i2c")) {
622 rc = bcm2711_release_bsc(dev);
623 if (rc)
624 return rc;
625 }
626
627 rc = of_property_read_string(dev->device->of_node, "interrupt-names",
628 &int_name);
629 if (rc < 0)
630 int_name = NULL;
631
632 /* Get the interrupt number */
633 dev->irq = platform_get_irq_optional(pdev, 0);
634
635 /* disable the bsc interrupt line */
636 brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
637
638 /* register the ISR handler */
639 if (dev->irq >= 0) {
640 rc = devm_request_irq(&pdev->dev, dev->irq, brcmstb_i2c_isr,
641 IRQF_SHARED,
642 int_name ? int_name : pdev->name,
643 dev);
644
645 if (rc) {
646 dev_dbg(dev->device, "falling back to polling mode");
647 dev->irq = -1;
648 }
649 }
650
651 if (of_property_read_u32(dev->device->of_node,
652 "clock-frequency", &dev->clk_freq_hz)) {
653 dev_warn(dev->device, "setting clock-frequency@%dHz\n",
654 bsc_clk[0].hz);
655 dev->clk_freq_hz = bsc_clk[0].hz;
656 }
657
658 /* set the data in/out register size for compatible SoCs */
659 if (of_device_is_compatible(dev->device->of_node,
660 "brcm,brcmper-i2c"))
661 dev->data_regsz = sizeof(u8);
662 else
663 dev->data_regsz = sizeof(u32);
664
665 brcmstb_i2c_set_bsc_reg_defaults(dev);
666
667 /* Add the i2c adapter */
668 adap = &dev->adapter;
669 i2c_set_adapdata(adap, dev);
670 adap->owner = THIS_MODULE;
671 strscpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
672 adap->algo = &brcmstb_i2c_algo;
673 adap->dev.parent = &pdev->dev;
674 adap->dev.of_node = pdev->dev.of_node;
675 rc = i2c_add_adapter(adap);
676 if (rc)
677 return rc;
678
679 dev_info(dev->device, "%s@%dhz registered in %s mode\n",
680 int_name ? int_name : " ", dev->clk_freq_hz,
681 (dev->irq >= 0) ? "interrupt" : "polling");
682
683 return 0;
684 }
685
brcmstb_i2c_remove(struct platform_device * pdev)686 static void brcmstb_i2c_remove(struct platform_device *pdev)
687 {
688 struct brcmstb_i2c_dev *dev = platform_get_drvdata(pdev);
689
690 i2c_del_adapter(&dev->adapter);
691 }
692
brcmstb_i2c_suspend(struct device * dev)693 static int brcmstb_i2c_suspend(struct device *dev)
694 {
695 struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev);
696
697 i2c_mark_adapter_suspended(&i2c_dev->adapter);
698 return 0;
699 }
700
brcmstb_i2c_resume(struct device * dev)701 static int brcmstb_i2c_resume(struct device *dev)
702 {
703 struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev);
704
705 brcmstb_i2c_set_bsc_reg_defaults(i2c_dev);
706 i2c_mark_adapter_resumed(&i2c_dev->adapter);
707
708 return 0;
709 }
710
711 static DEFINE_SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend,
712 brcmstb_i2c_resume);
713
714 static const struct of_device_id brcmstb_i2c_of_match[] = {
715 {.compatible = "brcm,brcmstb-i2c"},
716 {.compatible = "brcm,brcmper-i2c"},
717 {.compatible = "brcm,bcm2711-hdmi-i2c"},
718 {},
719 };
720 MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match);
721
722 static struct platform_driver brcmstb_i2c_driver = {
723 .driver = {
724 .name = "brcmstb-i2c",
725 .of_match_table = brcmstb_i2c_of_match,
726 .pm = pm_sleep_ptr(&brcmstb_i2c_pm),
727 },
728 .probe = brcmstb_i2c_probe,
729 .remove_new = brcmstb_i2c_remove,
730 };
731 module_platform_driver(brcmstb_i2c_driver);
732
733 MODULE_AUTHOR("Kamal Dasu <kdasu@broadcom.com>");
734 MODULE_DESCRIPTION("Broadcom Settop I2C Driver");
735 MODULE_LICENSE("GPL v2");
736