1 /* 2 * Copyright (C) 2014 Broadcom Corporation 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation version 2. 7 * 8 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 9 * kind, whether express or implied; without even the implied warranty 10 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 */ 13 14 #include <linux/delay.h> 15 #include <linux/i2c.h> 16 #include <linux/interrupt.h> 17 #include <linux/io.h> 18 #include <linux/kernel.h> 19 #include <linux/module.h> 20 #include <linux/of_device.h> 21 #include <linux/platform_device.h> 22 #include <linux/slab.h> 23 24 #define IDM_CTRL_DIRECT_OFFSET 0x00 25 #define CFG_OFFSET 0x00 26 #define CFG_RESET_SHIFT 31 27 #define CFG_EN_SHIFT 30 28 #define CFG_SLAVE_ADDR_0_SHIFT 28 29 #define CFG_M_RETRY_CNT_SHIFT 16 30 #define CFG_M_RETRY_CNT_MASK 0x0f 31 32 #define TIM_CFG_OFFSET 0x04 33 #define TIM_CFG_MODE_400_SHIFT 31 34 #define TIM_RAND_SLAVE_STRETCH_SHIFT 24 35 #define TIM_RAND_SLAVE_STRETCH_MASK 0x7f 36 #define TIM_PERIODIC_SLAVE_STRETCH_SHIFT 16 37 #define TIM_PERIODIC_SLAVE_STRETCH_MASK 0x7f 38 39 #define S_CFG_SMBUS_ADDR_OFFSET 0x08 40 #define S_CFG_EN_NIC_SMB_ADDR3_SHIFT 31 41 #define S_CFG_NIC_SMB_ADDR3_SHIFT 24 42 #define S_CFG_NIC_SMB_ADDR3_MASK 0x7f 43 #define S_CFG_EN_NIC_SMB_ADDR2_SHIFT 23 44 #define S_CFG_NIC_SMB_ADDR2_SHIFT 16 45 #define S_CFG_NIC_SMB_ADDR2_MASK 0x7f 46 #define S_CFG_EN_NIC_SMB_ADDR1_SHIFT 15 47 #define S_CFG_NIC_SMB_ADDR1_SHIFT 8 48 #define S_CFG_NIC_SMB_ADDR1_MASK 0x7f 49 #define S_CFG_EN_NIC_SMB_ADDR0_SHIFT 7 50 #define S_CFG_NIC_SMB_ADDR0_SHIFT 0 51 #define S_CFG_NIC_SMB_ADDR0_MASK 0x7f 52 53 #define M_FIFO_CTRL_OFFSET 0x0c 54 #define M_FIFO_RX_FLUSH_SHIFT 31 55 #define M_FIFO_TX_FLUSH_SHIFT 30 56 #define M_FIFO_RX_CNT_SHIFT 16 57 #define M_FIFO_RX_CNT_MASK 0x7f 58 #define M_FIFO_RX_THLD_SHIFT 8 59 #define M_FIFO_RX_THLD_MASK 0x3f 60 61 #define S_FIFO_CTRL_OFFSET 0x10 62 #define S_FIFO_RX_FLUSH_SHIFT 31 63 #define S_FIFO_TX_FLUSH_SHIFT 30 64 #define S_FIFO_RX_CNT_SHIFT 16 65 #define S_FIFO_RX_CNT_MASK 0x7f 66 #define S_FIFO_RX_THLD_SHIFT 8 67 #define S_FIFO_RX_THLD_MASK 0x3f 68 69 #define M_CMD_OFFSET 0x30 70 #define M_CMD_START_BUSY_SHIFT 31 71 #define M_CMD_STATUS_SHIFT 25 72 #define M_CMD_STATUS_MASK 0x07 73 #define M_CMD_STATUS_SUCCESS 0x0 74 #define M_CMD_STATUS_LOST_ARB 0x1 75 #define M_CMD_STATUS_NACK_ADDR 0x2 76 #define M_CMD_STATUS_NACK_DATA 0x3 77 #define M_CMD_STATUS_TIMEOUT 0x4 78 #define M_CMD_STATUS_FIFO_UNDERRUN 0x5 79 #define M_CMD_STATUS_RX_FIFO_FULL 0x6 80 #define M_CMD_PROTOCOL_SHIFT 9 81 #define M_CMD_PROTOCOL_MASK 0xf 82 #define M_CMD_PROTOCOL_QUICK 0x0 83 #define M_CMD_PROTOCOL_BLK_WR 0x7 84 #define M_CMD_PROTOCOL_BLK_RD 0x8 85 #define M_CMD_PROTOCOL_PROCESS 0xa 86 #define M_CMD_PEC_SHIFT 8 87 #define M_CMD_RD_CNT_SHIFT 0 88 #define M_CMD_RD_CNT_MASK 0xff 89 90 #define S_CMD_OFFSET 0x34 91 #define S_CMD_START_BUSY_SHIFT 31 92 #define S_CMD_STATUS_SHIFT 23 93 #define S_CMD_STATUS_MASK 0x07 94 #define S_CMD_STATUS_SUCCESS 0x0 95 #define S_CMD_STATUS_TIMEOUT 0x5 96 #define S_CMD_STATUS_MASTER_ABORT 0x7 97 98 #define IE_OFFSET 0x38 99 #define IE_M_RX_FIFO_FULL_SHIFT 31 100 #define IE_M_RX_THLD_SHIFT 30 101 #define IE_M_START_BUSY_SHIFT 28 102 #define IE_M_TX_UNDERRUN_SHIFT 27 103 #define IE_S_RX_FIFO_FULL_SHIFT 26 104 #define IE_S_RX_THLD_SHIFT 25 105 #define IE_S_RX_EVENT_SHIFT 24 106 #define IE_S_START_BUSY_SHIFT 23 107 #define IE_S_TX_UNDERRUN_SHIFT 22 108 #define IE_S_RD_EVENT_SHIFT 21 109 110 #define IS_OFFSET 0x3c 111 #define IS_M_RX_FIFO_FULL_SHIFT 31 112 #define IS_M_RX_THLD_SHIFT 30 113 #define IS_M_START_BUSY_SHIFT 28 114 #define IS_M_TX_UNDERRUN_SHIFT 27 115 #define IS_S_RX_FIFO_FULL_SHIFT 26 116 #define IS_S_RX_THLD_SHIFT 25 117 #define IS_S_RX_EVENT_SHIFT 24 118 #define IS_S_START_BUSY_SHIFT 23 119 #define IS_S_TX_UNDERRUN_SHIFT 22 120 #define IS_S_RD_EVENT_SHIFT 21 121 122 #define M_TX_OFFSET 0x40 123 #define M_TX_WR_STATUS_SHIFT 31 124 #define M_TX_DATA_SHIFT 0 125 #define M_TX_DATA_MASK 0xff 126 127 #define M_RX_OFFSET 0x44 128 #define M_RX_STATUS_SHIFT 30 129 #define M_RX_STATUS_MASK 0x03 130 #define M_RX_PEC_ERR_SHIFT 29 131 #define M_RX_DATA_SHIFT 0 132 #define M_RX_DATA_MASK 0xff 133 134 #define S_TX_OFFSET 0x48 135 #define S_TX_WR_STATUS_SHIFT 31 136 #define S_TX_DATA_SHIFT 0 137 #define S_TX_DATA_MASK 0xff 138 139 #define S_RX_OFFSET 0x4c 140 #define S_RX_STATUS_SHIFT 30 141 #define S_RX_STATUS_MASK 0x03 142 #define S_RX_PEC_ERR_SHIFT 29 143 #define S_RX_DATA_SHIFT 0 144 #define S_RX_DATA_MASK 0xff 145 146 #define I2C_TIMEOUT_MSEC 50000 147 #define M_TX_RX_FIFO_SIZE 64 148 #define M_RX_FIFO_MAX_THLD_VALUE (M_TX_RX_FIFO_SIZE - 1) 149 150 #define M_RX_MAX_READ_LEN 255 151 #define M_RX_FIFO_THLD_VALUE 50 152 153 #define IE_M_ALL_INTERRUPT_SHIFT 27 154 #define IE_M_ALL_INTERRUPT_MASK 0x1e 155 156 #define SLAVE_READ_WRITE_BIT_MASK 0x1 157 #define SLAVE_READ_WRITE_BIT_SHIFT 0x1 158 #define SLAVE_MAX_SIZE_TRANSACTION 64 159 #define SLAVE_CLOCK_STRETCH_TIME 25 160 161 #define IE_S_ALL_INTERRUPT_SHIFT 21 162 #define IE_S_ALL_INTERRUPT_MASK 0x3f 163 /* 164 * It takes ~18us to reading 10bytes of data, hence to keep tasklet 165 * running for less time, max slave read per tasklet is set to 10 bytes. 166 */ 167 #define MAX_SLAVE_RX_PER_INT 10 168 169 enum i2c_slave_read_status { 170 I2C_SLAVE_RX_FIFO_EMPTY = 0, 171 I2C_SLAVE_RX_START, 172 I2C_SLAVE_RX_DATA, 173 I2C_SLAVE_RX_END, 174 }; 175 176 enum bus_speed_index { 177 I2C_SPD_100K = 0, 178 I2C_SPD_400K, 179 }; 180 181 enum bcm_iproc_i2c_type { 182 IPROC_I2C, 183 IPROC_I2C_NIC 184 }; 185 186 struct bcm_iproc_i2c_dev { 187 struct device *device; 188 enum bcm_iproc_i2c_type type; 189 int irq; 190 191 void __iomem *base; 192 void __iomem *idm_base; 193 194 u32 ape_addr_mask; 195 196 /* lock for indirect access through IDM */ 197 spinlock_t idm_lock; 198 199 struct i2c_adapter adapter; 200 unsigned int bus_speed; 201 202 struct completion done; 203 int xfer_is_done; 204 205 struct i2c_msg *msg; 206 207 struct i2c_client *slave; 208 209 /* bytes that have been transferred */ 210 unsigned int tx_bytes; 211 /* bytes that have been read */ 212 unsigned int rx_bytes; 213 unsigned int thld_bytes; 214 215 bool slave_rx_only; 216 bool rx_start_rcvd; 217 bool slave_read_complete; 218 u32 tx_underrun; 219 u32 slave_int_mask; 220 struct tasklet_struct slave_rx_tasklet; 221 }; 222 223 /* tasklet to process slave rx data */ 224 static void slave_rx_tasklet_fn(unsigned long); 225 226 /* 227 * Can be expanded in the future if more interrupt status bits are utilized 228 */ 229 #define ISR_MASK (BIT(IS_M_START_BUSY_SHIFT) | BIT(IS_M_TX_UNDERRUN_SHIFT)\ 230 | BIT(IS_M_RX_THLD_SHIFT)) 231 232 #define ISR_MASK_SLAVE (BIT(IS_S_START_BUSY_SHIFT)\ 233 | BIT(IS_S_RX_EVENT_SHIFT) | BIT(IS_S_RD_EVENT_SHIFT)\ 234 | BIT(IS_S_TX_UNDERRUN_SHIFT) | BIT(IS_S_RX_FIFO_FULL_SHIFT)\ 235 | BIT(IS_S_RX_THLD_SHIFT)) 236 237 static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave); 238 static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave); 239 static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c, 240 bool enable); 241 242 static inline u32 iproc_i2c_rd_reg(struct bcm_iproc_i2c_dev *iproc_i2c, 243 u32 offset) 244 { 245 u32 val; 246 247 if (iproc_i2c->idm_base) { 248 spin_lock(&iproc_i2c->idm_lock); 249 writel(iproc_i2c->ape_addr_mask, 250 iproc_i2c->idm_base + IDM_CTRL_DIRECT_OFFSET); 251 val = readl(iproc_i2c->base + offset); 252 spin_unlock(&iproc_i2c->idm_lock); 253 } else { 254 val = readl(iproc_i2c->base + offset); 255 } 256 257 return val; 258 } 259 260 static inline void iproc_i2c_wr_reg(struct bcm_iproc_i2c_dev *iproc_i2c, 261 u32 offset, u32 val) 262 { 263 if (iproc_i2c->idm_base) { 264 spin_lock(&iproc_i2c->idm_lock); 265 writel(iproc_i2c->ape_addr_mask, 266 iproc_i2c->idm_base + IDM_CTRL_DIRECT_OFFSET); 267 writel(val, iproc_i2c->base + offset); 268 spin_unlock(&iproc_i2c->idm_lock); 269 } else { 270 writel(val, iproc_i2c->base + offset); 271 } 272 } 273 274 static void bcm_iproc_i2c_slave_init( 275 struct bcm_iproc_i2c_dev *iproc_i2c, bool need_reset) 276 { 277 u32 val; 278 279 iproc_i2c->tx_underrun = 0; 280 if (need_reset) { 281 /* put controller in reset */ 282 val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET); 283 val |= BIT(CFG_RESET_SHIFT); 284 iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); 285 286 /* wait 100 usec per spec */ 287 udelay(100); 288 289 /* bring controller out of reset */ 290 val &= ~(BIT(CFG_RESET_SHIFT)); 291 iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); 292 } 293 294 /* flush TX/RX FIFOs */ 295 val = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT)); 296 iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, val); 297 298 /* Maximum slave stretch time */ 299 val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); 300 val &= ~(TIM_RAND_SLAVE_STRETCH_MASK << TIM_RAND_SLAVE_STRETCH_SHIFT); 301 val |= (SLAVE_CLOCK_STRETCH_TIME << TIM_RAND_SLAVE_STRETCH_SHIFT); 302 iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); 303 304 /* Configure the slave address */ 305 val = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET); 306 val |= BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT); 307 val &= ~(S_CFG_NIC_SMB_ADDR3_MASK << S_CFG_NIC_SMB_ADDR3_SHIFT); 308 val |= (iproc_i2c->slave->addr << S_CFG_NIC_SMB_ADDR3_SHIFT); 309 iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, val); 310 311 /* clear all pending slave interrupts */ 312 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE); 313 314 /* Enable interrupt register to indicate a valid byte in receive fifo */ 315 val = BIT(IE_S_RX_EVENT_SHIFT); 316 /* Enable interrupt register to indicate Slave Rx FIFO Full */ 317 val |= BIT(IE_S_RX_FIFO_FULL_SHIFT); 318 /* Enable interrupt register to indicate a Master read transaction */ 319 val |= BIT(IE_S_RD_EVENT_SHIFT); 320 /* Enable interrupt register for the Slave BUSY command */ 321 val |= BIT(IE_S_START_BUSY_SHIFT); 322 iproc_i2c->slave_int_mask = val; 323 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); 324 } 325 326 static void bcm_iproc_i2c_check_slave_status( 327 struct bcm_iproc_i2c_dev *iproc_i2c) 328 { 329 u32 val; 330 331 val = iproc_i2c_rd_reg(iproc_i2c, S_CMD_OFFSET); 332 /* status is valid only when START_BUSY is cleared after it was set */ 333 if (val & BIT(S_CMD_START_BUSY_SHIFT)) 334 return; 335 336 val = (val >> S_CMD_STATUS_SHIFT) & S_CMD_STATUS_MASK; 337 if (val == S_CMD_STATUS_TIMEOUT || val == S_CMD_STATUS_MASTER_ABORT) { 338 dev_err(iproc_i2c->device, (val == S_CMD_STATUS_TIMEOUT) ? 339 "slave random stretch time timeout\n" : 340 "Master aborted read transaction\n"); 341 /* re-initialize i2c for recovery */ 342 bcm_iproc_i2c_enable_disable(iproc_i2c, false); 343 bcm_iproc_i2c_slave_init(iproc_i2c, true); 344 bcm_iproc_i2c_enable_disable(iproc_i2c, true); 345 } 346 } 347 348 static void bcm_iproc_i2c_slave_read(struct bcm_iproc_i2c_dev *iproc_i2c) 349 { 350 u8 rx_data, rx_status; 351 u32 rx_bytes = 0; 352 u32 val; 353 354 while (rx_bytes < MAX_SLAVE_RX_PER_INT) { 355 val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET); 356 rx_status = (val >> S_RX_STATUS_SHIFT) & S_RX_STATUS_MASK; 357 rx_data = ((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK); 358 359 if (rx_status == I2C_SLAVE_RX_START) { 360 /* Start of SMBUS Master write */ 361 i2c_slave_event(iproc_i2c->slave, 362 I2C_SLAVE_WRITE_REQUESTED, &rx_data); 363 iproc_i2c->rx_start_rcvd = true; 364 iproc_i2c->slave_read_complete = false; 365 } else if (rx_status == I2C_SLAVE_RX_DATA && 366 iproc_i2c->rx_start_rcvd) { 367 /* Middle of SMBUS Master write */ 368 i2c_slave_event(iproc_i2c->slave, 369 I2C_SLAVE_WRITE_RECEIVED, &rx_data); 370 } else if (rx_status == I2C_SLAVE_RX_END && 371 iproc_i2c->rx_start_rcvd) { 372 /* End of SMBUS Master write */ 373 if (iproc_i2c->slave_rx_only) 374 i2c_slave_event(iproc_i2c->slave, 375 I2C_SLAVE_WRITE_RECEIVED, 376 &rx_data); 377 378 i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP, 379 &rx_data); 380 } else if (rx_status == I2C_SLAVE_RX_FIFO_EMPTY) { 381 iproc_i2c->rx_start_rcvd = false; 382 iproc_i2c->slave_read_complete = true; 383 break; 384 } 385 386 rx_bytes++; 387 } 388 } 389 390 static void slave_rx_tasklet_fn(unsigned long data) 391 { 392 struct bcm_iproc_i2c_dev *iproc_i2c = (struct bcm_iproc_i2c_dev *)data; 393 u32 int_clr; 394 395 bcm_iproc_i2c_slave_read(iproc_i2c); 396 397 /* clear pending IS_S_RX_EVENT_SHIFT interrupt */ 398 int_clr = BIT(IS_S_RX_EVENT_SHIFT); 399 400 if (!iproc_i2c->slave_rx_only && iproc_i2c->slave_read_complete) { 401 /* 402 * In case of single byte master-read request, 403 * IS_S_TX_UNDERRUN_SHIFT event is generated before 404 * IS_S_START_BUSY_SHIFT event. Hence start slave data send 405 * from first IS_S_TX_UNDERRUN_SHIFT event. 406 * 407 * This means don't send any data from slave when 408 * IS_S_RD_EVENT_SHIFT event is generated else it will increment 409 * eeprom or other backend slave driver read pointer twice. 410 */ 411 iproc_i2c->tx_underrun = 0; 412 iproc_i2c->slave_int_mask |= BIT(IE_S_TX_UNDERRUN_SHIFT); 413 414 /* clear IS_S_RD_EVENT_SHIFT interrupt */ 415 int_clr |= BIT(IS_S_RD_EVENT_SHIFT); 416 } 417 418 /* clear slave interrupt */ 419 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, int_clr); 420 /* enable slave interrupts */ 421 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, iproc_i2c->slave_int_mask); 422 } 423 424 static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c, 425 u32 status) 426 { 427 u32 val; 428 u8 value; 429 430 /* 431 * Slave events in case of master-write, master-write-read and, 432 * master-read 433 * 434 * Master-write : only IS_S_RX_EVENT_SHIFT event 435 * Master-write-read: both IS_S_RX_EVENT_SHIFT and IS_S_RD_EVENT_SHIFT 436 * events 437 * Master-read : both IS_S_RX_EVENT_SHIFT and IS_S_RD_EVENT_SHIFT 438 * events or only IS_S_RD_EVENT_SHIFT 439 * 440 * iproc has a slave rx fifo size of 64 bytes. Rx fifo full interrupt 441 * (IS_S_RX_FIFO_FULL_SHIFT) will be generated when RX fifo becomes 442 * full. This can happen if Master issues write requests of more than 443 * 64 bytes. 444 */ 445 if (status & BIT(IS_S_RX_EVENT_SHIFT) || 446 status & BIT(IS_S_RD_EVENT_SHIFT) || 447 status & BIT(IS_S_RX_FIFO_FULL_SHIFT)) { 448 /* disable slave interrupts */ 449 val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 450 val &= ~iproc_i2c->slave_int_mask; 451 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); 452 453 if (status & BIT(IS_S_RD_EVENT_SHIFT)) 454 /* Master-write-read request */ 455 iproc_i2c->slave_rx_only = false; 456 else 457 /* Master-write request only */ 458 iproc_i2c->slave_rx_only = true; 459 460 /* schedule tasklet to read data later */ 461 tasklet_schedule(&iproc_i2c->slave_rx_tasklet); 462 463 /* 464 * clear only IS_S_RX_EVENT_SHIFT and 465 * IS_S_RX_FIFO_FULL_SHIFT interrupt. 466 */ 467 val = BIT(IS_S_RX_EVENT_SHIFT); 468 if (status & BIT(IS_S_RX_FIFO_FULL_SHIFT)) 469 val |= BIT(IS_S_RX_FIFO_FULL_SHIFT); 470 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, val); 471 } 472 473 if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) { 474 iproc_i2c->tx_underrun++; 475 if (iproc_i2c->tx_underrun == 1) 476 /* Start of SMBUS for Master Read */ 477 i2c_slave_event(iproc_i2c->slave, 478 I2C_SLAVE_READ_REQUESTED, 479 &value); 480 else 481 /* Master read other than start */ 482 i2c_slave_event(iproc_i2c->slave, 483 I2C_SLAVE_READ_PROCESSED, 484 &value); 485 486 iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value); 487 /* start transfer */ 488 val = BIT(S_CMD_START_BUSY_SHIFT); 489 iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val); 490 491 /* clear interrupt */ 492 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, 493 BIT(IS_S_TX_UNDERRUN_SHIFT)); 494 } 495 496 /* Stop received from master in case of master read transaction */ 497 if (status & BIT(IS_S_START_BUSY_SHIFT)) { 498 /* 499 * Disable interrupt for TX FIFO becomes empty and 500 * less than PKT_LENGTH bytes were output on the SMBUS 501 */ 502 iproc_i2c->slave_int_mask &= ~BIT(IE_S_TX_UNDERRUN_SHIFT); 503 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 504 iproc_i2c->slave_int_mask); 505 506 /* End of SMBUS for Master Read */ 507 val = BIT(S_TX_WR_STATUS_SHIFT); 508 iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, val); 509 510 val = BIT(S_CMD_START_BUSY_SHIFT); 511 iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val); 512 513 /* flush TX FIFOs */ 514 val = iproc_i2c_rd_reg(iproc_i2c, S_FIFO_CTRL_OFFSET); 515 val |= (BIT(S_FIFO_TX_FLUSH_SHIFT)); 516 iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, val); 517 518 i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP, &value); 519 520 /* clear interrupt */ 521 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, 522 BIT(IS_S_START_BUSY_SHIFT)); 523 } 524 525 /* check slave transmit status only if slave is transmitting */ 526 if (!iproc_i2c->slave_rx_only) 527 bcm_iproc_i2c_check_slave_status(iproc_i2c); 528 529 return true; 530 } 531 532 static void bcm_iproc_i2c_read_valid_bytes(struct bcm_iproc_i2c_dev *iproc_i2c) 533 { 534 struct i2c_msg *msg = iproc_i2c->msg; 535 uint32_t val; 536 537 /* Read valid data from RX FIFO */ 538 while (iproc_i2c->rx_bytes < msg->len) { 539 val = iproc_i2c_rd_reg(iproc_i2c, M_RX_OFFSET); 540 541 /* rx fifo empty */ 542 if (!((val >> M_RX_STATUS_SHIFT) & M_RX_STATUS_MASK)) 543 break; 544 545 msg->buf[iproc_i2c->rx_bytes] = 546 (val >> M_RX_DATA_SHIFT) & M_RX_DATA_MASK; 547 iproc_i2c->rx_bytes++; 548 } 549 } 550 551 static void bcm_iproc_i2c_send(struct bcm_iproc_i2c_dev *iproc_i2c) 552 { 553 struct i2c_msg *msg = iproc_i2c->msg; 554 unsigned int tx_bytes = msg->len - iproc_i2c->tx_bytes; 555 unsigned int i; 556 u32 val; 557 558 /* can only fill up to the FIFO size */ 559 tx_bytes = min_t(unsigned int, tx_bytes, M_TX_RX_FIFO_SIZE); 560 for (i = 0; i < tx_bytes; i++) { 561 /* start from where we left over */ 562 unsigned int idx = iproc_i2c->tx_bytes + i; 563 564 val = msg->buf[idx]; 565 566 /* mark the last byte */ 567 if (idx == msg->len - 1) { 568 val |= BIT(M_TX_WR_STATUS_SHIFT); 569 570 if (iproc_i2c->irq) { 571 u32 tmp; 572 573 /* 574 * Since this is the last byte, we should now 575 * disable TX FIFO underrun interrupt 576 */ 577 tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 578 tmp &= ~BIT(IE_M_TX_UNDERRUN_SHIFT); 579 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 580 tmp); 581 } 582 } 583 584 /* load data into TX FIFO */ 585 iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val); 586 } 587 588 /* update number of transferred bytes */ 589 iproc_i2c->tx_bytes += tx_bytes; 590 } 591 592 static void bcm_iproc_i2c_read(struct bcm_iproc_i2c_dev *iproc_i2c) 593 { 594 struct i2c_msg *msg = iproc_i2c->msg; 595 u32 bytes_left, val; 596 597 bcm_iproc_i2c_read_valid_bytes(iproc_i2c); 598 bytes_left = msg->len - iproc_i2c->rx_bytes; 599 if (bytes_left == 0) { 600 if (iproc_i2c->irq) { 601 /* finished reading all data, disable rx thld event */ 602 val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 603 val &= ~BIT(IS_M_RX_THLD_SHIFT); 604 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); 605 } 606 } else if (bytes_left < iproc_i2c->thld_bytes) { 607 /* set bytes left as threshold */ 608 val = iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET); 609 val &= ~(M_FIFO_RX_THLD_MASK << M_FIFO_RX_THLD_SHIFT); 610 val |= (bytes_left << M_FIFO_RX_THLD_SHIFT); 611 iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); 612 iproc_i2c->thld_bytes = bytes_left; 613 } 614 /* 615 * bytes_left >= iproc_i2c->thld_bytes, 616 * hence no need to change the THRESHOLD SET. 617 * It will remain as iproc_i2c->thld_bytes itself 618 */ 619 } 620 621 static void bcm_iproc_i2c_process_m_event(struct bcm_iproc_i2c_dev *iproc_i2c, 622 u32 status) 623 { 624 /* TX FIFO is empty and we have more data to send */ 625 if (status & BIT(IS_M_TX_UNDERRUN_SHIFT)) 626 bcm_iproc_i2c_send(iproc_i2c); 627 628 /* RX FIFO threshold is reached and data needs to be read out */ 629 if (status & BIT(IS_M_RX_THLD_SHIFT)) 630 bcm_iproc_i2c_read(iproc_i2c); 631 632 /* transfer is done */ 633 if (status & BIT(IS_M_START_BUSY_SHIFT)) { 634 iproc_i2c->xfer_is_done = 1; 635 if (iproc_i2c->irq) 636 complete(&iproc_i2c->done); 637 } 638 } 639 640 static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data) 641 { 642 struct bcm_iproc_i2c_dev *iproc_i2c = data; 643 u32 slave_status; 644 u32 status; 645 bool ret; 646 647 status = iproc_i2c_rd_reg(iproc_i2c, IS_OFFSET); 648 /* process only slave interrupt which are enabled */ 649 slave_status = status & iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET) & 650 ISR_MASK_SLAVE; 651 652 if (slave_status) { 653 ret = bcm_iproc_i2c_slave_isr(iproc_i2c, slave_status); 654 if (ret) 655 return IRQ_HANDLED; 656 else 657 return IRQ_NONE; 658 } 659 660 status &= ISR_MASK; 661 if (!status) 662 return IRQ_NONE; 663 664 /* process all master based events */ 665 bcm_iproc_i2c_process_m_event(iproc_i2c, status); 666 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status); 667 668 return IRQ_HANDLED; 669 } 670 671 static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c) 672 { 673 u32 val; 674 675 /* put controller in reset */ 676 val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET); 677 val |= BIT(CFG_RESET_SHIFT); 678 val &= ~(BIT(CFG_EN_SHIFT)); 679 iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); 680 681 /* wait 100 usec per spec */ 682 udelay(100); 683 684 /* bring controller out of reset */ 685 val &= ~(BIT(CFG_RESET_SHIFT)); 686 iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); 687 688 /* flush TX/RX FIFOs and set RX FIFO threshold to zero */ 689 val = (BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT)); 690 iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); 691 /* disable all interrupts */ 692 val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 693 val &= ~(IE_M_ALL_INTERRUPT_MASK << 694 IE_M_ALL_INTERRUPT_SHIFT); 695 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); 696 697 /* clear all pending interrupts */ 698 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, 0xffffffff); 699 700 return 0; 701 } 702 703 static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c, 704 bool enable) 705 { 706 u32 val; 707 708 val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET); 709 if (enable) 710 val |= BIT(CFG_EN_SHIFT); 711 else 712 val &= ~BIT(CFG_EN_SHIFT); 713 iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); 714 } 715 716 static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c, 717 struct i2c_msg *msg) 718 { 719 u32 val; 720 721 val = iproc_i2c_rd_reg(iproc_i2c, M_CMD_OFFSET); 722 val = (val >> M_CMD_STATUS_SHIFT) & M_CMD_STATUS_MASK; 723 724 switch (val) { 725 case M_CMD_STATUS_SUCCESS: 726 return 0; 727 728 case M_CMD_STATUS_LOST_ARB: 729 dev_dbg(iproc_i2c->device, "lost bus arbitration\n"); 730 return -EAGAIN; 731 732 case M_CMD_STATUS_NACK_ADDR: 733 dev_dbg(iproc_i2c->device, "NAK addr:0x%02x\n", msg->addr); 734 return -ENXIO; 735 736 case M_CMD_STATUS_NACK_DATA: 737 dev_dbg(iproc_i2c->device, "NAK data\n"); 738 return -ENXIO; 739 740 case M_CMD_STATUS_TIMEOUT: 741 dev_dbg(iproc_i2c->device, "bus timeout\n"); 742 return -ETIMEDOUT; 743 744 case M_CMD_STATUS_FIFO_UNDERRUN: 745 dev_dbg(iproc_i2c->device, "FIFO under-run\n"); 746 return -ENXIO; 747 748 case M_CMD_STATUS_RX_FIFO_FULL: 749 dev_dbg(iproc_i2c->device, "RX FIFO full\n"); 750 return -ETIMEDOUT; 751 752 default: 753 dev_dbg(iproc_i2c->device, "unknown error code=%d\n", val); 754 755 /* re-initialize i2c for recovery */ 756 bcm_iproc_i2c_enable_disable(iproc_i2c, false); 757 bcm_iproc_i2c_init(iproc_i2c); 758 bcm_iproc_i2c_enable_disable(iproc_i2c, true); 759 760 return -EIO; 761 } 762 } 763 764 static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c, 765 struct i2c_msg *msg, 766 u32 cmd) 767 { 768 unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MSEC); 769 u32 val, status; 770 int ret; 771 772 iproc_i2c_wr_reg(iproc_i2c, M_CMD_OFFSET, cmd); 773 774 if (iproc_i2c->irq) { 775 time_left = wait_for_completion_timeout(&iproc_i2c->done, 776 time_left); 777 /* disable all interrupts */ 778 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0); 779 /* read it back to flush the write */ 780 iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 781 /* make sure the interrupt handler isn't running */ 782 synchronize_irq(iproc_i2c->irq); 783 784 } else { /* polling mode */ 785 unsigned long timeout = jiffies + time_left; 786 787 do { 788 status = iproc_i2c_rd_reg(iproc_i2c, 789 IS_OFFSET) & ISR_MASK; 790 bcm_iproc_i2c_process_m_event(iproc_i2c, status); 791 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status); 792 793 if (time_after(jiffies, timeout)) { 794 time_left = 0; 795 break; 796 } 797 798 cpu_relax(); 799 cond_resched(); 800 } while (!iproc_i2c->xfer_is_done); 801 } 802 803 if (!time_left && !iproc_i2c->xfer_is_done) { 804 dev_err(iproc_i2c->device, "transaction timed out\n"); 805 806 /* flush both TX/RX FIFOs */ 807 val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT); 808 iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); 809 return -ETIMEDOUT; 810 } 811 812 ret = bcm_iproc_i2c_check_status(iproc_i2c, msg); 813 if (ret) { 814 /* flush both TX/RX FIFOs */ 815 val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT); 816 iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); 817 return ret; 818 } 819 820 return 0; 821 } 822 823 /* 824 * If 'process_call' is true, then this is a multi-msg transfer that requires 825 * a repeated start between the messages. 826 * More specifically, it must be a write (reg) followed by a read (data). 827 * The i2c quirks are set to enforce this rule. 828 */ 829 static int bcm_iproc_i2c_xfer_internal(struct bcm_iproc_i2c_dev *iproc_i2c, 830 struct i2c_msg *msgs, bool process_call) 831 { 832 int i; 833 u8 addr; 834 u32 val, tmp, val_intr_en; 835 unsigned int tx_bytes; 836 struct i2c_msg *msg = &msgs[0]; 837 838 /* check if bus is busy */ 839 if (!!(iproc_i2c_rd_reg(iproc_i2c, 840 M_CMD_OFFSET) & BIT(M_CMD_START_BUSY_SHIFT))) { 841 dev_warn(iproc_i2c->device, "bus is busy\n"); 842 return -EBUSY; 843 } 844 845 iproc_i2c->msg = msg; 846 847 /* format and load slave address into the TX FIFO */ 848 addr = i2c_8bit_addr_from_msg(msg); 849 iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, addr); 850 851 /* 852 * For a write transaction, load data into the TX FIFO. Only allow 853 * loading up to TX FIFO size - 1 bytes of data since the first byte 854 * has been used up by the slave address 855 */ 856 tx_bytes = min_t(unsigned int, msg->len, M_TX_RX_FIFO_SIZE - 1); 857 if (!(msg->flags & I2C_M_RD)) { 858 for (i = 0; i < tx_bytes; i++) { 859 val = msg->buf[i]; 860 861 /* mark the last byte */ 862 if (!process_call && (i == msg->len - 1)) 863 val |= BIT(M_TX_WR_STATUS_SHIFT); 864 865 iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val); 866 } 867 iproc_i2c->tx_bytes = tx_bytes; 868 } 869 870 /* Process the read message if this is process call */ 871 if (process_call) { 872 msg++; 873 iproc_i2c->msg = msg; /* point to second msg */ 874 875 /* 876 * The last byte to be sent out should be a slave 877 * address with read operation 878 */ 879 addr = i2c_8bit_addr_from_msg(msg); 880 /* mark it the last byte out */ 881 val = addr | BIT(M_TX_WR_STATUS_SHIFT); 882 iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val); 883 } 884 885 /* mark as incomplete before starting the transaction */ 886 if (iproc_i2c->irq) 887 reinit_completion(&iproc_i2c->done); 888 889 iproc_i2c->xfer_is_done = 0; 890 891 /* 892 * Enable the "start busy" interrupt, which will be triggered after the 893 * transaction is done, i.e., the internal start_busy bit, transitions 894 * from 1 to 0. 895 */ 896 val_intr_en = BIT(IE_M_START_BUSY_SHIFT); 897 898 /* 899 * If TX data size is larger than the TX FIFO, need to enable TX 900 * underrun interrupt, which will be triggerred when the TX FIFO is 901 * empty. When that happens we can then pump more data into the FIFO 902 */ 903 if (!process_call && !(msg->flags & I2C_M_RD) && 904 msg->len > iproc_i2c->tx_bytes) 905 val_intr_en |= BIT(IE_M_TX_UNDERRUN_SHIFT); 906 907 /* 908 * Now we can activate the transfer. For a read operation, specify the 909 * number of bytes to read 910 */ 911 val = BIT(M_CMD_START_BUSY_SHIFT); 912 913 if (msg->len == 0) { 914 /* SMBUS QUICK Command (Read/Write) */ 915 val |= (M_CMD_PROTOCOL_QUICK << M_CMD_PROTOCOL_SHIFT); 916 } else if (msg->flags & I2C_M_RD) { 917 u32 protocol; 918 919 iproc_i2c->rx_bytes = 0; 920 if (msg->len > M_RX_FIFO_MAX_THLD_VALUE) 921 iproc_i2c->thld_bytes = M_RX_FIFO_THLD_VALUE; 922 else 923 iproc_i2c->thld_bytes = msg->len; 924 925 /* set threshold value */ 926 tmp = iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET); 927 tmp &= ~(M_FIFO_RX_THLD_MASK << M_FIFO_RX_THLD_SHIFT); 928 tmp |= iproc_i2c->thld_bytes << M_FIFO_RX_THLD_SHIFT; 929 iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, tmp); 930 931 /* enable the RX threshold interrupt */ 932 val_intr_en |= BIT(IE_M_RX_THLD_SHIFT); 933 934 protocol = process_call ? 935 M_CMD_PROTOCOL_PROCESS : M_CMD_PROTOCOL_BLK_RD; 936 937 val |= (protocol << M_CMD_PROTOCOL_SHIFT) | 938 (msg->len << M_CMD_RD_CNT_SHIFT); 939 } else { 940 val |= (M_CMD_PROTOCOL_BLK_WR << M_CMD_PROTOCOL_SHIFT); 941 } 942 943 if (iproc_i2c->irq) 944 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val_intr_en); 945 946 return bcm_iproc_i2c_xfer_wait(iproc_i2c, msg, val); 947 } 948 949 static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter, 950 struct i2c_msg msgs[], int num) 951 { 952 struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adapter); 953 bool process_call = false; 954 int ret; 955 956 if (num == 2) { 957 /* Repeated start, use process call */ 958 process_call = true; 959 if (msgs[1].flags & I2C_M_NOSTART) { 960 dev_err(iproc_i2c->device, "Invalid repeated start\n"); 961 return -EOPNOTSUPP; 962 } 963 } 964 965 ret = bcm_iproc_i2c_xfer_internal(iproc_i2c, msgs, process_call); 966 if (ret) { 967 dev_dbg(iproc_i2c->device, "xfer failed\n"); 968 return ret; 969 } 970 971 return num; 972 } 973 974 static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap) 975 { 976 u32 val; 977 978 val = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; 979 980 if (adap->algo->reg_slave) 981 val |= I2C_FUNC_SLAVE; 982 983 return val; 984 } 985 986 static struct i2c_algorithm bcm_iproc_algo = { 987 .master_xfer = bcm_iproc_i2c_xfer, 988 .functionality = bcm_iproc_i2c_functionality, 989 .reg_slave = bcm_iproc_i2c_reg_slave, 990 .unreg_slave = bcm_iproc_i2c_unreg_slave, 991 }; 992 993 static const struct i2c_adapter_quirks bcm_iproc_i2c_quirks = { 994 .flags = I2C_AQ_COMB_WRITE_THEN_READ, 995 .max_comb_1st_msg_len = M_TX_RX_FIFO_SIZE, 996 .max_read_len = M_RX_MAX_READ_LEN, 997 }; 998 999 static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c) 1000 { 1001 unsigned int bus_speed; 1002 u32 val; 1003 int ret = of_property_read_u32(iproc_i2c->device->of_node, 1004 "clock-frequency", &bus_speed); 1005 if (ret < 0) { 1006 dev_info(iproc_i2c->device, 1007 "unable to interpret clock-frequency DT property\n"); 1008 bus_speed = I2C_MAX_STANDARD_MODE_FREQ; 1009 } 1010 1011 if (bus_speed < I2C_MAX_STANDARD_MODE_FREQ) { 1012 dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n", 1013 bus_speed); 1014 dev_err(iproc_i2c->device, 1015 "valid speeds are 100khz and 400khz\n"); 1016 return -EINVAL; 1017 } else if (bus_speed < I2C_MAX_FAST_MODE_FREQ) { 1018 bus_speed = I2C_MAX_STANDARD_MODE_FREQ; 1019 } else { 1020 bus_speed = I2C_MAX_FAST_MODE_FREQ; 1021 } 1022 1023 iproc_i2c->bus_speed = bus_speed; 1024 val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); 1025 val &= ~BIT(TIM_CFG_MODE_400_SHIFT); 1026 val |= (bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT; 1027 iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); 1028 1029 dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed); 1030 1031 return 0; 1032 } 1033 1034 static int bcm_iproc_i2c_probe(struct platform_device *pdev) 1035 { 1036 int irq, ret = 0; 1037 struct bcm_iproc_i2c_dev *iproc_i2c; 1038 struct i2c_adapter *adap; 1039 struct resource *res; 1040 1041 iproc_i2c = devm_kzalloc(&pdev->dev, sizeof(*iproc_i2c), 1042 GFP_KERNEL); 1043 if (!iproc_i2c) 1044 return -ENOMEM; 1045 1046 platform_set_drvdata(pdev, iproc_i2c); 1047 iproc_i2c->device = &pdev->dev; 1048 iproc_i2c->type = 1049 (enum bcm_iproc_i2c_type)of_device_get_match_data(&pdev->dev); 1050 init_completion(&iproc_i2c->done); 1051 1052 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1053 iproc_i2c->base = devm_ioremap_resource(iproc_i2c->device, res); 1054 if (IS_ERR(iproc_i2c->base)) 1055 return PTR_ERR(iproc_i2c->base); 1056 1057 if (iproc_i2c->type == IPROC_I2C_NIC) { 1058 res = platform_get_resource(pdev, IORESOURCE_MEM, 1); 1059 iproc_i2c->idm_base = devm_ioremap_resource(iproc_i2c->device, 1060 res); 1061 if (IS_ERR(iproc_i2c->idm_base)) 1062 return PTR_ERR(iproc_i2c->idm_base); 1063 1064 ret = of_property_read_u32(iproc_i2c->device->of_node, 1065 "brcm,ape-hsls-addr-mask", 1066 &iproc_i2c->ape_addr_mask); 1067 if (ret < 0) { 1068 dev_err(iproc_i2c->device, 1069 "'brcm,ape-hsls-addr-mask' missing\n"); 1070 return -EINVAL; 1071 } 1072 1073 spin_lock_init(&iproc_i2c->idm_lock); 1074 1075 /* no slave support */ 1076 bcm_iproc_algo.reg_slave = NULL; 1077 bcm_iproc_algo.unreg_slave = NULL; 1078 } 1079 1080 ret = bcm_iproc_i2c_init(iproc_i2c); 1081 if (ret) 1082 return ret; 1083 1084 ret = bcm_iproc_i2c_cfg_speed(iproc_i2c); 1085 if (ret) 1086 return ret; 1087 1088 irq = platform_get_irq(pdev, 0); 1089 if (irq > 0) { 1090 ret = devm_request_irq(iproc_i2c->device, irq, 1091 bcm_iproc_i2c_isr, 0, pdev->name, 1092 iproc_i2c); 1093 if (ret < 0) { 1094 dev_err(iproc_i2c->device, 1095 "unable to request irq %i\n", irq); 1096 return ret; 1097 } 1098 1099 iproc_i2c->irq = irq; 1100 } else { 1101 dev_warn(iproc_i2c->device, 1102 "no irq resource, falling back to poll mode\n"); 1103 } 1104 1105 bcm_iproc_i2c_enable_disable(iproc_i2c, true); 1106 1107 adap = &iproc_i2c->adapter; 1108 i2c_set_adapdata(adap, iproc_i2c); 1109 snprintf(adap->name, sizeof(adap->name), 1110 "Broadcom iProc (%s)", 1111 of_node_full_name(iproc_i2c->device->of_node)); 1112 adap->algo = &bcm_iproc_algo; 1113 adap->quirks = &bcm_iproc_i2c_quirks; 1114 adap->dev.parent = &pdev->dev; 1115 adap->dev.of_node = pdev->dev.of_node; 1116 1117 return i2c_add_adapter(adap); 1118 } 1119 1120 static int bcm_iproc_i2c_remove(struct platform_device *pdev) 1121 { 1122 struct bcm_iproc_i2c_dev *iproc_i2c = platform_get_drvdata(pdev); 1123 1124 if (iproc_i2c->irq) { 1125 /* 1126 * Make sure there's no pending interrupt when we remove the 1127 * adapter 1128 */ 1129 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0); 1130 iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 1131 synchronize_irq(iproc_i2c->irq); 1132 } 1133 1134 i2c_del_adapter(&iproc_i2c->adapter); 1135 bcm_iproc_i2c_enable_disable(iproc_i2c, false); 1136 1137 return 0; 1138 } 1139 1140 #ifdef CONFIG_PM_SLEEP 1141 1142 static int bcm_iproc_i2c_suspend(struct device *dev) 1143 { 1144 struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev); 1145 1146 if (iproc_i2c->irq) { 1147 /* 1148 * Make sure there's no pending interrupt when we go into 1149 * suspend 1150 */ 1151 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0); 1152 iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 1153 synchronize_irq(iproc_i2c->irq); 1154 } 1155 1156 /* now disable the controller */ 1157 bcm_iproc_i2c_enable_disable(iproc_i2c, false); 1158 1159 return 0; 1160 } 1161 1162 static int bcm_iproc_i2c_resume(struct device *dev) 1163 { 1164 struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev); 1165 int ret; 1166 u32 val; 1167 1168 /* 1169 * Power domain could have been shut off completely in system deep 1170 * sleep, so re-initialize the block here 1171 */ 1172 ret = bcm_iproc_i2c_init(iproc_i2c); 1173 if (ret) 1174 return ret; 1175 1176 /* configure to the desired bus speed */ 1177 val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); 1178 val &= ~BIT(TIM_CFG_MODE_400_SHIFT); 1179 val |= (iproc_i2c->bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT; 1180 iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); 1181 1182 bcm_iproc_i2c_enable_disable(iproc_i2c, true); 1183 1184 return 0; 1185 } 1186 1187 static const struct dev_pm_ops bcm_iproc_i2c_pm_ops = { 1188 .suspend_late = &bcm_iproc_i2c_suspend, 1189 .resume_early = &bcm_iproc_i2c_resume 1190 }; 1191 1192 #define BCM_IPROC_I2C_PM_OPS (&bcm_iproc_i2c_pm_ops) 1193 #else 1194 #define BCM_IPROC_I2C_PM_OPS NULL 1195 #endif /* CONFIG_PM_SLEEP */ 1196 1197 1198 static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave) 1199 { 1200 struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter); 1201 1202 if (iproc_i2c->slave) 1203 return -EBUSY; 1204 1205 if (slave->flags & I2C_CLIENT_TEN) 1206 return -EAFNOSUPPORT; 1207 1208 iproc_i2c->slave = slave; 1209 1210 tasklet_init(&iproc_i2c->slave_rx_tasklet, slave_rx_tasklet_fn, 1211 (unsigned long)iproc_i2c); 1212 1213 bcm_iproc_i2c_slave_init(iproc_i2c, false); 1214 return 0; 1215 } 1216 1217 static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave) 1218 { 1219 u32 tmp; 1220 struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter); 1221 1222 if (!iproc_i2c->slave) 1223 return -EINVAL; 1224 1225 disable_irq(iproc_i2c->irq); 1226 1227 tasklet_kill(&iproc_i2c->slave_rx_tasklet); 1228 1229 /* disable all slave interrupts */ 1230 tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 1231 tmp &= ~(IE_S_ALL_INTERRUPT_MASK << 1232 IE_S_ALL_INTERRUPT_SHIFT); 1233 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, tmp); 1234 1235 /* Erase the slave address programmed */ 1236 tmp = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET); 1237 tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT); 1238 iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, tmp); 1239 1240 /* flush TX/RX FIFOs */ 1241 tmp = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT)); 1242 iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, tmp); 1243 1244 /* clear all pending slave interrupts */ 1245 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE); 1246 1247 iproc_i2c->slave = NULL; 1248 1249 enable_irq(iproc_i2c->irq); 1250 1251 return 0; 1252 } 1253 1254 static const struct of_device_id bcm_iproc_i2c_of_match[] = { 1255 { 1256 .compatible = "brcm,iproc-i2c", 1257 .data = (int *)IPROC_I2C, 1258 }, { 1259 .compatible = "brcm,iproc-nic-i2c", 1260 .data = (int *)IPROC_I2C_NIC, 1261 }, 1262 { /* sentinel */ } 1263 }; 1264 MODULE_DEVICE_TABLE(of, bcm_iproc_i2c_of_match); 1265 1266 static struct platform_driver bcm_iproc_i2c_driver = { 1267 .driver = { 1268 .name = "bcm-iproc-i2c", 1269 .of_match_table = bcm_iproc_i2c_of_match, 1270 .pm = BCM_IPROC_I2C_PM_OPS, 1271 }, 1272 .probe = bcm_iproc_i2c_probe, 1273 .remove = bcm_iproc_i2c_remove, 1274 }; 1275 module_platform_driver(bcm_iproc_i2c_driver); 1276 1277 MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>"); 1278 MODULE_DESCRIPTION("Broadcom iProc I2C Driver"); 1279 MODULE_LICENSE("GPL v2"); 1280