1 /* 2 * Copyright (C) 2014 Broadcom Corporation 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation version 2. 7 * 8 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 9 * kind, whether express or implied; without even the implied warranty 10 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 */ 13 14 #include <linux/delay.h> 15 #include <linux/i2c.h> 16 #include <linux/interrupt.h> 17 #include <linux/io.h> 18 #include <linux/kernel.h> 19 #include <linux/module.h> 20 #include <linux/of_device.h> 21 #include <linux/platform_device.h> 22 #include <linux/slab.h> 23 24 #define IDM_CTRL_DIRECT_OFFSET 0x00 25 #define CFG_OFFSET 0x00 26 #define CFG_RESET_SHIFT 31 27 #define CFG_EN_SHIFT 30 28 #define CFG_SLAVE_ADDR_0_SHIFT 28 29 #define CFG_M_RETRY_CNT_SHIFT 16 30 #define CFG_M_RETRY_CNT_MASK 0x0f 31 32 #define TIM_CFG_OFFSET 0x04 33 #define TIM_CFG_MODE_400_SHIFT 31 34 #define TIM_RAND_SLAVE_STRETCH_SHIFT 24 35 #define TIM_RAND_SLAVE_STRETCH_MASK 0x7f 36 #define TIM_PERIODIC_SLAVE_STRETCH_SHIFT 16 37 #define TIM_PERIODIC_SLAVE_STRETCH_MASK 0x7f 38 39 #define S_CFG_SMBUS_ADDR_OFFSET 0x08 40 #define S_CFG_EN_NIC_SMB_ADDR3_SHIFT 31 41 #define S_CFG_NIC_SMB_ADDR3_SHIFT 24 42 #define S_CFG_NIC_SMB_ADDR3_MASK 0x7f 43 #define S_CFG_EN_NIC_SMB_ADDR2_SHIFT 23 44 #define S_CFG_NIC_SMB_ADDR2_SHIFT 16 45 #define S_CFG_NIC_SMB_ADDR2_MASK 0x7f 46 #define S_CFG_EN_NIC_SMB_ADDR1_SHIFT 15 47 #define S_CFG_NIC_SMB_ADDR1_SHIFT 8 48 #define S_CFG_NIC_SMB_ADDR1_MASK 0x7f 49 #define S_CFG_EN_NIC_SMB_ADDR0_SHIFT 7 50 #define S_CFG_NIC_SMB_ADDR0_SHIFT 0 51 #define S_CFG_NIC_SMB_ADDR0_MASK 0x7f 52 53 #define M_FIFO_CTRL_OFFSET 0x0c 54 #define M_FIFO_RX_FLUSH_SHIFT 31 55 #define M_FIFO_TX_FLUSH_SHIFT 30 56 #define M_FIFO_RX_CNT_SHIFT 16 57 #define M_FIFO_RX_CNT_MASK 0x7f 58 #define M_FIFO_RX_THLD_SHIFT 8 59 #define M_FIFO_RX_THLD_MASK 0x3f 60 61 #define S_FIFO_CTRL_OFFSET 0x10 62 #define S_FIFO_RX_FLUSH_SHIFT 31 63 #define S_FIFO_TX_FLUSH_SHIFT 30 64 #define S_FIFO_RX_CNT_SHIFT 16 65 #define S_FIFO_RX_CNT_MASK 0x7f 66 #define S_FIFO_RX_THLD_SHIFT 8 67 #define S_FIFO_RX_THLD_MASK 0x3f 68 69 #define M_CMD_OFFSET 0x30 70 #define M_CMD_START_BUSY_SHIFT 31 71 #define M_CMD_STATUS_SHIFT 25 72 #define M_CMD_STATUS_MASK 0x07 73 #define M_CMD_STATUS_SUCCESS 0x0 74 #define M_CMD_STATUS_LOST_ARB 0x1 75 #define M_CMD_STATUS_NACK_ADDR 0x2 76 #define M_CMD_STATUS_NACK_DATA 0x3 77 #define M_CMD_STATUS_TIMEOUT 0x4 78 #define M_CMD_STATUS_FIFO_UNDERRUN 0x5 79 #define M_CMD_STATUS_RX_FIFO_FULL 0x6 80 #define M_CMD_PROTOCOL_SHIFT 9 81 #define M_CMD_PROTOCOL_MASK 0xf 82 #define M_CMD_PROTOCOL_QUICK 0x0 83 #define M_CMD_PROTOCOL_BLK_WR 0x7 84 #define M_CMD_PROTOCOL_BLK_RD 0x8 85 #define M_CMD_PROTOCOL_PROCESS 0xa 86 #define M_CMD_PEC_SHIFT 8 87 #define M_CMD_RD_CNT_SHIFT 0 88 #define M_CMD_RD_CNT_MASK 0xff 89 90 #define S_CMD_OFFSET 0x34 91 #define S_CMD_START_BUSY_SHIFT 31 92 #define S_CMD_STATUS_SHIFT 23 93 #define S_CMD_STATUS_MASK 0x07 94 #define S_CMD_STATUS_SUCCESS 0x0 95 #define S_CMD_STATUS_TIMEOUT 0x5 96 97 #define IE_OFFSET 0x38 98 #define IE_M_RX_FIFO_FULL_SHIFT 31 99 #define IE_M_RX_THLD_SHIFT 30 100 #define IE_M_START_BUSY_SHIFT 28 101 #define IE_M_TX_UNDERRUN_SHIFT 27 102 #define IE_S_RX_FIFO_FULL_SHIFT 26 103 #define IE_S_RX_THLD_SHIFT 25 104 #define IE_S_RX_EVENT_SHIFT 24 105 #define IE_S_START_BUSY_SHIFT 23 106 #define IE_S_TX_UNDERRUN_SHIFT 22 107 #define IE_S_RD_EVENT_SHIFT 21 108 109 #define IS_OFFSET 0x3c 110 #define IS_M_RX_FIFO_FULL_SHIFT 31 111 #define IS_M_RX_THLD_SHIFT 30 112 #define IS_M_START_BUSY_SHIFT 28 113 #define IS_M_TX_UNDERRUN_SHIFT 27 114 #define IS_S_RX_FIFO_FULL_SHIFT 26 115 #define IS_S_RX_THLD_SHIFT 25 116 #define IS_S_RX_EVENT_SHIFT 24 117 #define IS_S_START_BUSY_SHIFT 23 118 #define IS_S_TX_UNDERRUN_SHIFT 22 119 #define IS_S_RD_EVENT_SHIFT 21 120 121 #define M_TX_OFFSET 0x40 122 #define M_TX_WR_STATUS_SHIFT 31 123 #define M_TX_DATA_SHIFT 0 124 #define M_TX_DATA_MASK 0xff 125 126 #define M_RX_OFFSET 0x44 127 #define M_RX_STATUS_SHIFT 30 128 #define M_RX_STATUS_MASK 0x03 129 #define M_RX_PEC_ERR_SHIFT 29 130 #define M_RX_DATA_SHIFT 0 131 #define M_RX_DATA_MASK 0xff 132 133 #define S_TX_OFFSET 0x48 134 #define S_TX_WR_STATUS_SHIFT 31 135 #define S_TX_DATA_SHIFT 0 136 #define S_TX_DATA_MASK 0xff 137 138 #define S_RX_OFFSET 0x4c 139 #define S_RX_STATUS_SHIFT 30 140 #define S_RX_STATUS_MASK 0x03 141 #define S_RX_PEC_ERR_SHIFT 29 142 #define S_RX_DATA_SHIFT 0 143 #define S_RX_DATA_MASK 0xff 144 145 #define I2C_TIMEOUT_MSEC 50000 146 #define M_TX_RX_FIFO_SIZE 64 147 #define M_RX_FIFO_MAX_THLD_VALUE (M_TX_RX_FIFO_SIZE - 1) 148 149 #define M_RX_MAX_READ_LEN 255 150 #define M_RX_FIFO_THLD_VALUE 50 151 152 #define IE_M_ALL_INTERRUPT_SHIFT 27 153 #define IE_M_ALL_INTERRUPT_MASK 0x1e 154 155 #define SLAVE_READ_WRITE_BIT_MASK 0x1 156 #define SLAVE_READ_WRITE_BIT_SHIFT 0x1 157 #define SLAVE_MAX_SIZE_TRANSACTION 64 158 #define SLAVE_CLOCK_STRETCH_TIME 25 159 160 #define IE_S_ALL_INTERRUPT_SHIFT 21 161 #define IE_S_ALL_INTERRUPT_MASK 0x3f 162 163 enum i2c_slave_read_status { 164 I2C_SLAVE_RX_FIFO_EMPTY = 0, 165 I2C_SLAVE_RX_START, 166 I2C_SLAVE_RX_DATA, 167 I2C_SLAVE_RX_END, 168 }; 169 170 enum bus_speed_index { 171 I2C_SPD_100K = 0, 172 I2C_SPD_400K, 173 }; 174 175 enum bcm_iproc_i2c_type { 176 IPROC_I2C, 177 IPROC_I2C_NIC 178 }; 179 180 struct bcm_iproc_i2c_dev { 181 struct device *device; 182 enum bcm_iproc_i2c_type type; 183 int irq; 184 185 void __iomem *base; 186 void __iomem *idm_base; 187 188 u32 ape_addr_mask; 189 190 /* lock for indirect access through IDM */ 191 spinlock_t idm_lock; 192 193 struct i2c_adapter adapter; 194 unsigned int bus_speed; 195 196 struct completion done; 197 int xfer_is_done; 198 199 struct i2c_msg *msg; 200 201 struct i2c_client *slave; 202 203 /* bytes that have been transferred */ 204 unsigned int tx_bytes; 205 /* bytes that have been read */ 206 unsigned int rx_bytes; 207 unsigned int thld_bytes; 208 }; 209 210 /* 211 * Can be expanded in the future if more interrupt status bits are utilized 212 */ 213 #define ISR_MASK (BIT(IS_M_START_BUSY_SHIFT) | BIT(IS_M_TX_UNDERRUN_SHIFT)\ 214 | BIT(IS_M_RX_THLD_SHIFT)) 215 216 #define ISR_MASK_SLAVE (BIT(IS_S_START_BUSY_SHIFT)\ 217 | BIT(IS_S_RX_EVENT_SHIFT) | BIT(IS_S_RD_EVENT_SHIFT)\ 218 | BIT(IS_S_TX_UNDERRUN_SHIFT)) 219 220 static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave); 221 static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave); 222 static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c, 223 bool enable); 224 225 static inline u32 iproc_i2c_rd_reg(struct bcm_iproc_i2c_dev *iproc_i2c, 226 u32 offset) 227 { 228 u32 val; 229 230 if (iproc_i2c->idm_base) { 231 spin_lock(&iproc_i2c->idm_lock); 232 writel(iproc_i2c->ape_addr_mask, 233 iproc_i2c->idm_base + IDM_CTRL_DIRECT_OFFSET); 234 val = readl(iproc_i2c->base + offset); 235 spin_unlock(&iproc_i2c->idm_lock); 236 } else { 237 val = readl(iproc_i2c->base + offset); 238 } 239 240 return val; 241 } 242 243 static inline void iproc_i2c_wr_reg(struct bcm_iproc_i2c_dev *iproc_i2c, 244 u32 offset, u32 val) 245 { 246 if (iproc_i2c->idm_base) { 247 spin_lock(&iproc_i2c->idm_lock); 248 writel(iproc_i2c->ape_addr_mask, 249 iproc_i2c->idm_base + IDM_CTRL_DIRECT_OFFSET); 250 writel(val, iproc_i2c->base + offset); 251 spin_unlock(&iproc_i2c->idm_lock); 252 } else { 253 writel(val, iproc_i2c->base + offset); 254 } 255 } 256 257 static void bcm_iproc_i2c_slave_init( 258 struct bcm_iproc_i2c_dev *iproc_i2c, bool need_reset) 259 { 260 u32 val; 261 262 if (need_reset) { 263 /* put controller in reset */ 264 val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET); 265 val |= BIT(CFG_RESET_SHIFT); 266 iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); 267 268 /* wait 100 usec per spec */ 269 udelay(100); 270 271 /* bring controller out of reset */ 272 val &= ~(BIT(CFG_RESET_SHIFT)); 273 iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); 274 } 275 276 /* flush TX/RX FIFOs */ 277 val = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT)); 278 iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, val); 279 280 /* Maximum slave stretch time */ 281 val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); 282 val &= ~(TIM_RAND_SLAVE_STRETCH_MASK << TIM_RAND_SLAVE_STRETCH_SHIFT); 283 val |= (SLAVE_CLOCK_STRETCH_TIME << TIM_RAND_SLAVE_STRETCH_SHIFT); 284 iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); 285 286 /* Configure the slave address */ 287 val = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET); 288 val |= BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT); 289 val &= ~(S_CFG_NIC_SMB_ADDR3_MASK << S_CFG_NIC_SMB_ADDR3_SHIFT); 290 val |= (iproc_i2c->slave->addr << S_CFG_NIC_SMB_ADDR3_SHIFT); 291 iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, val); 292 293 /* clear all pending slave interrupts */ 294 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE); 295 296 /* Enable interrupt register to indicate a valid byte in receive fifo */ 297 val = BIT(IE_S_RX_EVENT_SHIFT); 298 /* Enable interrupt register for the Slave BUSY command */ 299 val |= BIT(IE_S_START_BUSY_SHIFT); 300 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); 301 } 302 303 static void bcm_iproc_i2c_check_slave_status( 304 struct bcm_iproc_i2c_dev *iproc_i2c) 305 { 306 u32 val; 307 308 val = iproc_i2c_rd_reg(iproc_i2c, S_CMD_OFFSET); 309 /* status is valid only when START_BUSY is cleared after it was set */ 310 if (val & BIT(S_CMD_START_BUSY_SHIFT)) 311 return; 312 313 val = (val >> S_CMD_STATUS_SHIFT) & S_CMD_STATUS_MASK; 314 if (val == S_CMD_STATUS_TIMEOUT) { 315 dev_err(iproc_i2c->device, "slave random stretch time timeout\n"); 316 317 /* re-initialize i2c for recovery */ 318 bcm_iproc_i2c_enable_disable(iproc_i2c, false); 319 bcm_iproc_i2c_slave_init(iproc_i2c, true); 320 bcm_iproc_i2c_enable_disable(iproc_i2c, true); 321 } 322 } 323 324 static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c, 325 u32 status) 326 { 327 u32 val; 328 u8 value, rx_status; 329 330 /* Slave RX byte receive */ 331 if (status & BIT(IS_S_RX_EVENT_SHIFT)) { 332 val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET); 333 rx_status = (val >> S_RX_STATUS_SHIFT) & S_RX_STATUS_MASK; 334 if (rx_status == I2C_SLAVE_RX_START) { 335 /* Start of SMBUS for Master write */ 336 i2c_slave_event(iproc_i2c->slave, 337 I2C_SLAVE_WRITE_REQUESTED, &value); 338 339 val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET); 340 value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK); 341 i2c_slave_event(iproc_i2c->slave, 342 I2C_SLAVE_WRITE_RECEIVED, &value); 343 } else if (status & BIT(IS_S_RD_EVENT_SHIFT)) { 344 /* Start of SMBUS for Master Read */ 345 i2c_slave_event(iproc_i2c->slave, 346 I2C_SLAVE_READ_REQUESTED, &value); 347 iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value); 348 349 val = BIT(S_CMD_START_BUSY_SHIFT); 350 iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val); 351 352 /* 353 * Enable interrupt for TX FIFO becomes empty and 354 * less than PKT_LENGTH bytes were output on the SMBUS 355 */ 356 val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 357 val |= BIT(IE_S_TX_UNDERRUN_SHIFT); 358 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); 359 } else { 360 /* Master write other than start */ 361 value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK); 362 i2c_slave_event(iproc_i2c->slave, 363 I2C_SLAVE_WRITE_RECEIVED, &value); 364 if (rx_status == I2C_SLAVE_RX_END) 365 i2c_slave_event(iproc_i2c->slave, 366 I2C_SLAVE_STOP, &value); 367 } 368 } else if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) { 369 /* Master read other than start */ 370 i2c_slave_event(iproc_i2c->slave, 371 I2C_SLAVE_READ_PROCESSED, &value); 372 373 iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value); 374 val = BIT(S_CMD_START_BUSY_SHIFT); 375 iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val); 376 } 377 378 /* Stop */ 379 if (status & BIT(IS_S_START_BUSY_SHIFT)) { 380 i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP, &value); 381 /* 382 * Enable interrupt for TX FIFO becomes empty and 383 * less than PKT_LENGTH bytes were output on the SMBUS 384 */ 385 val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 386 val &= ~BIT(IE_S_TX_UNDERRUN_SHIFT); 387 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); 388 } 389 390 /* clear interrupt status */ 391 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status); 392 393 bcm_iproc_i2c_check_slave_status(iproc_i2c); 394 return true; 395 } 396 397 static void bcm_iproc_i2c_read_valid_bytes(struct bcm_iproc_i2c_dev *iproc_i2c) 398 { 399 struct i2c_msg *msg = iproc_i2c->msg; 400 uint32_t val; 401 402 /* Read valid data from RX FIFO */ 403 while (iproc_i2c->rx_bytes < msg->len) { 404 val = iproc_i2c_rd_reg(iproc_i2c, M_RX_OFFSET); 405 406 /* rx fifo empty */ 407 if (!((val >> M_RX_STATUS_SHIFT) & M_RX_STATUS_MASK)) 408 break; 409 410 msg->buf[iproc_i2c->rx_bytes] = 411 (val >> M_RX_DATA_SHIFT) & M_RX_DATA_MASK; 412 iproc_i2c->rx_bytes++; 413 } 414 } 415 416 static void bcm_iproc_i2c_send(struct bcm_iproc_i2c_dev *iproc_i2c) 417 { 418 struct i2c_msg *msg = iproc_i2c->msg; 419 unsigned int tx_bytes = msg->len - iproc_i2c->tx_bytes; 420 unsigned int i; 421 u32 val; 422 423 /* can only fill up to the FIFO size */ 424 tx_bytes = min_t(unsigned int, tx_bytes, M_TX_RX_FIFO_SIZE); 425 for (i = 0; i < tx_bytes; i++) { 426 /* start from where we left over */ 427 unsigned int idx = iproc_i2c->tx_bytes + i; 428 429 val = msg->buf[idx]; 430 431 /* mark the last byte */ 432 if (idx == msg->len - 1) { 433 val |= BIT(M_TX_WR_STATUS_SHIFT); 434 435 if (iproc_i2c->irq) { 436 u32 tmp; 437 438 /* 439 * Since this is the last byte, we should now 440 * disable TX FIFO underrun interrupt 441 */ 442 tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 443 tmp &= ~BIT(IE_M_TX_UNDERRUN_SHIFT); 444 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 445 tmp); 446 } 447 } 448 449 /* load data into TX FIFO */ 450 iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val); 451 } 452 453 /* update number of transferred bytes */ 454 iproc_i2c->tx_bytes += tx_bytes; 455 } 456 457 static void bcm_iproc_i2c_read(struct bcm_iproc_i2c_dev *iproc_i2c) 458 { 459 struct i2c_msg *msg = iproc_i2c->msg; 460 u32 bytes_left, val; 461 462 bcm_iproc_i2c_read_valid_bytes(iproc_i2c); 463 bytes_left = msg->len - iproc_i2c->rx_bytes; 464 if (bytes_left == 0) { 465 if (iproc_i2c->irq) { 466 /* finished reading all data, disable rx thld event */ 467 val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 468 val &= ~BIT(IS_M_RX_THLD_SHIFT); 469 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); 470 } 471 } else if (bytes_left < iproc_i2c->thld_bytes) { 472 /* set bytes left as threshold */ 473 val = iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET); 474 val &= ~(M_FIFO_RX_THLD_MASK << M_FIFO_RX_THLD_SHIFT); 475 val |= (bytes_left << M_FIFO_RX_THLD_SHIFT); 476 iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); 477 iproc_i2c->thld_bytes = bytes_left; 478 } 479 /* 480 * bytes_left >= iproc_i2c->thld_bytes, 481 * hence no need to change the THRESHOLD SET. 482 * It will remain as iproc_i2c->thld_bytes itself 483 */ 484 } 485 486 static void bcm_iproc_i2c_process_m_event(struct bcm_iproc_i2c_dev *iproc_i2c, 487 u32 status) 488 { 489 /* TX FIFO is empty and we have more data to send */ 490 if (status & BIT(IS_M_TX_UNDERRUN_SHIFT)) 491 bcm_iproc_i2c_send(iproc_i2c); 492 493 /* RX FIFO threshold is reached and data needs to be read out */ 494 if (status & BIT(IS_M_RX_THLD_SHIFT)) 495 bcm_iproc_i2c_read(iproc_i2c); 496 497 /* transfer is done */ 498 if (status & BIT(IS_M_START_BUSY_SHIFT)) { 499 iproc_i2c->xfer_is_done = 1; 500 if (iproc_i2c->irq) 501 complete(&iproc_i2c->done); 502 } 503 } 504 505 static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data) 506 { 507 struct bcm_iproc_i2c_dev *iproc_i2c = data; 508 u32 status = iproc_i2c_rd_reg(iproc_i2c, IS_OFFSET); 509 bool ret; 510 u32 sl_status = status & ISR_MASK_SLAVE; 511 512 if (sl_status) { 513 ret = bcm_iproc_i2c_slave_isr(iproc_i2c, sl_status); 514 if (ret) 515 return IRQ_HANDLED; 516 else 517 return IRQ_NONE; 518 } 519 520 status &= ISR_MASK; 521 if (!status) 522 return IRQ_NONE; 523 524 /* process all master based events */ 525 bcm_iproc_i2c_process_m_event(iproc_i2c, status); 526 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status); 527 528 return IRQ_HANDLED; 529 } 530 531 static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c) 532 { 533 u32 val; 534 535 /* put controller in reset */ 536 val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET); 537 val |= BIT(CFG_RESET_SHIFT); 538 val &= ~(BIT(CFG_EN_SHIFT)); 539 iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); 540 541 /* wait 100 usec per spec */ 542 udelay(100); 543 544 /* bring controller out of reset */ 545 val &= ~(BIT(CFG_RESET_SHIFT)); 546 iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); 547 548 /* flush TX/RX FIFOs and set RX FIFO threshold to zero */ 549 val = (BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT)); 550 iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); 551 /* disable all interrupts */ 552 val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 553 val &= ~(IE_M_ALL_INTERRUPT_MASK << 554 IE_M_ALL_INTERRUPT_SHIFT); 555 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); 556 557 /* clear all pending interrupts */ 558 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, 0xffffffff); 559 560 return 0; 561 } 562 563 static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c, 564 bool enable) 565 { 566 u32 val; 567 568 val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET); 569 if (enable) 570 val |= BIT(CFG_EN_SHIFT); 571 else 572 val &= ~BIT(CFG_EN_SHIFT); 573 iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); 574 } 575 576 static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c, 577 struct i2c_msg *msg) 578 { 579 u32 val; 580 581 val = iproc_i2c_rd_reg(iproc_i2c, M_CMD_OFFSET); 582 val = (val >> M_CMD_STATUS_SHIFT) & M_CMD_STATUS_MASK; 583 584 switch (val) { 585 case M_CMD_STATUS_SUCCESS: 586 return 0; 587 588 case M_CMD_STATUS_LOST_ARB: 589 dev_dbg(iproc_i2c->device, "lost bus arbitration\n"); 590 return -EAGAIN; 591 592 case M_CMD_STATUS_NACK_ADDR: 593 dev_dbg(iproc_i2c->device, "NAK addr:0x%02x\n", msg->addr); 594 return -ENXIO; 595 596 case M_CMD_STATUS_NACK_DATA: 597 dev_dbg(iproc_i2c->device, "NAK data\n"); 598 return -ENXIO; 599 600 case M_CMD_STATUS_TIMEOUT: 601 dev_dbg(iproc_i2c->device, "bus timeout\n"); 602 return -ETIMEDOUT; 603 604 case M_CMD_STATUS_FIFO_UNDERRUN: 605 dev_dbg(iproc_i2c->device, "FIFO under-run\n"); 606 return -ENXIO; 607 608 case M_CMD_STATUS_RX_FIFO_FULL: 609 dev_dbg(iproc_i2c->device, "RX FIFO full\n"); 610 return -ETIMEDOUT; 611 612 default: 613 dev_dbg(iproc_i2c->device, "unknown error code=%d\n", val); 614 615 /* re-initialize i2c for recovery */ 616 bcm_iproc_i2c_enable_disable(iproc_i2c, false); 617 bcm_iproc_i2c_init(iproc_i2c); 618 bcm_iproc_i2c_enable_disable(iproc_i2c, true); 619 620 return -EIO; 621 } 622 } 623 624 static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c, 625 struct i2c_msg *msg, 626 u32 cmd) 627 { 628 unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MSEC); 629 u32 val, status; 630 int ret; 631 632 iproc_i2c_wr_reg(iproc_i2c, M_CMD_OFFSET, cmd); 633 634 if (iproc_i2c->irq) { 635 time_left = wait_for_completion_timeout(&iproc_i2c->done, 636 time_left); 637 /* disable all interrupts */ 638 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0); 639 /* read it back to flush the write */ 640 iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 641 /* make sure the interrupt handler isn't running */ 642 synchronize_irq(iproc_i2c->irq); 643 644 } else { /* polling mode */ 645 unsigned long timeout = jiffies + time_left; 646 647 do { 648 status = iproc_i2c_rd_reg(iproc_i2c, 649 IS_OFFSET) & ISR_MASK; 650 bcm_iproc_i2c_process_m_event(iproc_i2c, status); 651 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status); 652 653 if (time_after(jiffies, timeout)) { 654 time_left = 0; 655 break; 656 } 657 658 cpu_relax(); 659 cond_resched(); 660 } while (!iproc_i2c->xfer_is_done); 661 } 662 663 if (!time_left && !iproc_i2c->xfer_is_done) { 664 dev_err(iproc_i2c->device, "transaction timed out\n"); 665 666 /* flush both TX/RX FIFOs */ 667 val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT); 668 iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); 669 return -ETIMEDOUT; 670 } 671 672 ret = bcm_iproc_i2c_check_status(iproc_i2c, msg); 673 if (ret) { 674 /* flush both TX/RX FIFOs */ 675 val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT); 676 iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); 677 return ret; 678 } 679 680 return 0; 681 } 682 683 /* 684 * If 'process_call' is true, then this is a multi-msg transfer that requires 685 * a repeated start between the messages. 686 * More specifically, it must be a write (reg) followed by a read (data). 687 * The i2c quirks are set to enforce this rule. 688 */ 689 static int bcm_iproc_i2c_xfer_internal(struct bcm_iproc_i2c_dev *iproc_i2c, 690 struct i2c_msg *msgs, bool process_call) 691 { 692 int i; 693 u8 addr; 694 u32 val, tmp, val_intr_en; 695 unsigned int tx_bytes; 696 struct i2c_msg *msg = &msgs[0]; 697 698 /* check if bus is busy */ 699 if (!!(iproc_i2c_rd_reg(iproc_i2c, 700 M_CMD_OFFSET) & BIT(M_CMD_START_BUSY_SHIFT))) { 701 dev_warn(iproc_i2c->device, "bus is busy\n"); 702 return -EBUSY; 703 } 704 705 iproc_i2c->msg = msg; 706 707 /* format and load slave address into the TX FIFO */ 708 addr = i2c_8bit_addr_from_msg(msg); 709 iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, addr); 710 711 /* 712 * For a write transaction, load data into the TX FIFO. Only allow 713 * loading up to TX FIFO size - 1 bytes of data since the first byte 714 * has been used up by the slave address 715 */ 716 tx_bytes = min_t(unsigned int, msg->len, M_TX_RX_FIFO_SIZE - 1); 717 if (!(msg->flags & I2C_M_RD)) { 718 for (i = 0; i < tx_bytes; i++) { 719 val = msg->buf[i]; 720 721 /* mark the last byte */ 722 if (!process_call && (i == msg->len - 1)) 723 val |= 1 << M_TX_WR_STATUS_SHIFT; 724 725 iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val); 726 } 727 iproc_i2c->tx_bytes = tx_bytes; 728 } 729 730 /* Process the read message if this is process call */ 731 if (process_call) { 732 msg++; 733 iproc_i2c->msg = msg; /* point to second msg */ 734 735 /* 736 * The last byte to be sent out should be a slave 737 * address with read operation 738 */ 739 addr = i2c_8bit_addr_from_msg(msg); 740 /* mark it the last byte out */ 741 val = addr | (1 << M_TX_WR_STATUS_SHIFT); 742 iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val); 743 } 744 745 /* mark as incomplete before starting the transaction */ 746 if (iproc_i2c->irq) 747 reinit_completion(&iproc_i2c->done); 748 749 iproc_i2c->xfer_is_done = 0; 750 751 /* 752 * Enable the "start busy" interrupt, which will be triggered after the 753 * transaction is done, i.e., the internal start_busy bit, transitions 754 * from 1 to 0. 755 */ 756 val_intr_en = BIT(IE_M_START_BUSY_SHIFT); 757 758 /* 759 * If TX data size is larger than the TX FIFO, need to enable TX 760 * underrun interrupt, which will be triggerred when the TX FIFO is 761 * empty. When that happens we can then pump more data into the FIFO 762 */ 763 if (!process_call && !(msg->flags & I2C_M_RD) && 764 msg->len > iproc_i2c->tx_bytes) 765 val_intr_en |= BIT(IE_M_TX_UNDERRUN_SHIFT); 766 767 /* 768 * Now we can activate the transfer. For a read operation, specify the 769 * number of bytes to read 770 */ 771 val = BIT(M_CMD_START_BUSY_SHIFT); 772 773 if (msg->len == 0) { 774 /* SMBUS QUICK Command (Read/Write) */ 775 val |= (M_CMD_PROTOCOL_QUICK << M_CMD_PROTOCOL_SHIFT); 776 } else if (msg->flags & I2C_M_RD) { 777 u32 protocol; 778 779 iproc_i2c->rx_bytes = 0; 780 if (msg->len > M_RX_FIFO_MAX_THLD_VALUE) 781 iproc_i2c->thld_bytes = M_RX_FIFO_THLD_VALUE; 782 else 783 iproc_i2c->thld_bytes = msg->len; 784 785 /* set threshold value */ 786 tmp = iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET); 787 tmp &= ~(M_FIFO_RX_THLD_MASK << M_FIFO_RX_THLD_SHIFT); 788 tmp |= iproc_i2c->thld_bytes << M_FIFO_RX_THLD_SHIFT; 789 iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, tmp); 790 791 /* enable the RX threshold interrupt */ 792 val_intr_en |= BIT(IE_M_RX_THLD_SHIFT); 793 794 protocol = process_call ? 795 M_CMD_PROTOCOL_PROCESS : M_CMD_PROTOCOL_BLK_RD; 796 797 val |= (protocol << M_CMD_PROTOCOL_SHIFT) | 798 (msg->len << M_CMD_RD_CNT_SHIFT); 799 } else { 800 val |= (M_CMD_PROTOCOL_BLK_WR << M_CMD_PROTOCOL_SHIFT); 801 } 802 803 if (iproc_i2c->irq) 804 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val_intr_en); 805 806 return bcm_iproc_i2c_xfer_wait(iproc_i2c, msg, val); 807 } 808 809 static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter, 810 struct i2c_msg msgs[], int num) 811 { 812 struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adapter); 813 bool process_call = false; 814 int ret; 815 816 if (num == 2) { 817 /* Repeated start, use process call */ 818 process_call = true; 819 if (msgs[1].flags & I2C_M_NOSTART) { 820 dev_err(iproc_i2c->device, "Invalid repeated start\n"); 821 return -EOPNOTSUPP; 822 } 823 } 824 825 ret = bcm_iproc_i2c_xfer_internal(iproc_i2c, msgs, process_call); 826 if (ret) { 827 dev_dbg(iproc_i2c->device, "xfer failed\n"); 828 return ret; 829 } 830 831 return num; 832 } 833 834 static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap) 835 { 836 u32 val; 837 838 val = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; 839 840 if (adap->algo->reg_slave) 841 val |= I2C_FUNC_SLAVE; 842 843 return val; 844 } 845 846 static struct i2c_algorithm bcm_iproc_algo = { 847 .master_xfer = bcm_iproc_i2c_xfer, 848 .functionality = bcm_iproc_i2c_functionality, 849 .reg_slave = bcm_iproc_i2c_reg_slave, 850 .unreg_slave = bcm_iproc_i2c_unreg_slave, 851 }; 852 853 static const struct i2c_adapter_quirks bcm_iproc_i2c_quirks = { 854 .flags = I2C_AQ_COMB_WRITE_THEN_READ, 855 .max_comb_1st_msg_len = M_TX_RX_FIFO_SIZE, 856 .max_read_len = M_RX_MAX_READ_LEN, 857 }; 858 859 static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c) 860 { 861 unsigned int bus_speed; 862 u32 val; 863 int ret = of_property_read_u32(iproc_i2c->device->of_node, 864 "clock-frequency", &bus_speed); 865 if (ret < 0) { 866 dev_info(iproc_i2c->device, 867 "unable to interpret clock-frequency DT property\n"); 868 bus_speed = I2C_MAX_STANDARD_MODE_FREQ; 869 } 870 871 if (bus_speed < I2C_MAX_STANDARD_MODE_FREQ) { 872 dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n", 873 bus_speed); 874 dev_err(iproc_i2c->device, 875 "valid speeds are 100khz and 400khz\n"); 876 return -EINVAL; 877 } else if (bus_speed < I2C_MAX_FAST_MODE_FREQ) { 878 bus_speed = I2C_MAX_STANDARD_MODE_FREQ; 879 } else { 880 bus_speed = I2C_MAX_FAST_MODE_FREQ; 881 } 882 883 iproc_i2c->bus_speed = bus_speed; 884 val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); 885 val &= ~BIT(TIM_CFG_MODE_400_SHIFT); 886 val |= (bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT; 887 iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); 888 889 dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed); 890 891 return 0; 892 } 893 894 static int bcm_iproc_i2c_probe(struct platform_device *pdev) 895 { 896 int irq, ret = 0; 897 struct bcm_iproc_i2c_dev *iproc_i2c; 898 struct i2c_adapter *adap; 899 struct resource *res; 900 901 iproc_i2c = devm_kzalloc(&pdev->dev, sizeof(*iproc_i2c), 902 GFP_KERNEL); 903 if (!iproc_i2c) 904 return -ENOMEM; 905 906 platform_set_drvdata(pdev, iproc_i2c); 907 iproc_i2c->device = &pdev->dev; 908 iproc_i2c->type = 909 (enum bcm_iproc_i2c_type)of_device_get_match_data(&pdev->dev); 910 init_completion(&iproc_i2c->done); 911 912 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 913 iproc_i2c->base = devm_ioremap_resource(iproc_i2c->device, res); 914 if (IS_ERR(iproc_i2c->base)) 915 return PTR_ERR(iproc_i2c->base); 916 917 if (iproc_i2c->type == IPROC_I2C_NIC) { 918 res = platform_get_resource(pdev, IORESOURCE_MEM, 1); 919 iproc_i2c->idm_base = devm_ioremap_resource(iproc_i2c->device, 920 res); 921 if (IS_ERR(iproc_i2c->idm_base)) 922 return PTR_ERR(iproc_i2c->idm_base); 923 924 ret = of_property_read_u32(iproc_i2c->device->of_node, 925 "brcm,ape-hsls-addr-mask", 926 &iproc_i2c->ape_addr_mask); 927 if (ret < 0) { 928 dev_err(iproc_i2c->device, 929 "'brcm,ape-hsls-addr-mask' missing\n"); 930 return -EINVAL; 931 } 932 933 spin_lock_init(&iproc_i2c->idm_lock); 934 935 /* no slave support */ 936 bcm_iproc_algo.reg_slave = NULL; 937 bcm_iproc_algo.unreg_slave = NULL; 938 } 939 940 ret = bcm_iproc_i2c_init(iproc_i2c); 941 if (ret) 942 return ret; 943 944 ret = bcm_iproc_i2c_cfg_speed(iproc_i2c); 945 if (ret) 946 return ret; 947 948 irq = platform_get_irq(pdev, 0); 949 if (irq > 0) { 950 ret = devm_request_irq(iproc_i2c->device, irq, 951 bcm_iproc_i2c_isr, 0, pdev->name, 952 iproc_i2c); 953 if (ret < 0) { 954 dev_err(iproc_i2c->device, 955 "unable to request irq %i\n", irq); 956 return ret; 957 } 958 959 iproc_i2c->irq = irq; 960 } else { 961 dev_warn(iproc_i2c->device, 962 "no irq resource, falling back to poll mode\n"); 963 } 964 965 bcm_iproc_i2c_enable_disable(iproc_i2c, true); 966 967 adap = &iproc_i2c->adapter; 968 i2c_set_adapdata(adap, iproc_i2c); 969 snprintf(adap->name, sizeof(adap->name), 970 "Broadcom iProc (%s)", 971 of_node_full_name(iproc_i2c->device->of_node)); 972 adap->algo = &bcm_iproc_algo; 973 adap->quirks = &bcm_iproc_i2c_quirks; 974 adap->dev.parent = &pdev->dev; 975 adap->dev.of_node = pdev->dev.of_node; 976 977 return i2c_add_adapter(adap); 978 } 979 980 static int bcm_iproc_i2c_remove(struct platform_device *pdev) 981 { 982 struct bcm_iproc_i2c_dev *iproc_i2c = platform_get_drvdata(pdev); 983 984 if (iproc_i2c->irq) { 985 /* 986 * Make sure there's no pending interrupt when we remove the 987 * adapter 988 */ 989 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0); 990 iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 991 synchronize_irq(iproc_i2c->irq); 992 } 993 994 i2c_del_adapter(&iproc_i2c->adapter); 995 bcm_iproc_i2c_enable_disable(iproc_i2c, false); 996 997 return 0; 998 } 999 1000 #ifdef CONFIG_PM_SLEEP 1001 1002 static int bcm_iproc_i2c_suspend(struct device *dev) 1003 { 1004 struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev); 1005 1006 if (iproc_i2c->irq) { 1007 /* 1008 * Make sure there's no pending interrupt when we go into 1009 * suspend 1010 */ 1011 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0); 1012 iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 1013 synchronize_irq(iproc_i2c->irq); 1014 } 1015 1016 /* now disable the controller */ 1017 bcm_iproc_i2c_enable_disable(iproc_i2c, false); 1018 1019 return 0; 1020 } 1021 1022 static int bcm_iproc_i2c_resume(struct device *dev) 1023 { 1024 struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev); 1025 int ret; 1026 u32 val; 1027 1028 /* 1029 * Power domain could have been shut off completely in system deep 1030 * sleep, so re-initialize the block here 1031 */ 1032 ret = bcm_iproc_i2c_init(iproc_i2c); 1033 if (ret) 1034 return ret; 1035 1036 /* configure to the desired bus speed */ 1037 val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); 1038 val &= ~BIT(TIM_CFG_MODE_400_SHIFT); 1039 val |= (iproc_i2c->bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT; 1040 iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); 1041 1042 bcm_iproc_i2c_enable_disable(iproc_i2c, true); 1043 1044 return 0; 1045 } 1046 1047 static const struct dev_pm_ops bcm_iproc_i2c_pm_ops = { 1048 .suspend_late = &bcm_iproc_i2c_suspend, 1049 .resume_early = &bcm_iproc_i2c_resume 1050 }; 1051 1052 #define BCM_IPROC_I2C_PM_OPS (&bcm_iproc_i2c_pm_ops) 1053 #else 1054 #define BCM_IPROC_I2C_PM_OPS NULL 1055 #endif /* CONFIG_PM_SLEEP */ 1056 1057 1058 static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave) 1059 { 1060 struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter); 1061 1062 if (iproc_i2c->slave) 1063 return -EBUSY; 1064 1065 if (slave->flags & I2C_CLIENT_TEN) 1066 return -EAFNOSUPPORT; 1067 1068 iproc_i2c->slave = slave; 1069 bcm_iproc_i2c_slave_init(iproc_i2c, false); 1070 return 0; 1071 } 1072 1073 static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave) 1074 { 1075 u32 tmp; 1076 struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter); 1077 1078 if (!iproc_i2c->slave) 1079 return -EINVAL; 1080 1081 disable_irq(iproc_i2c->irq); 1082 1083 /* disable all slave interrupts */ 1084 tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); 1085 tmp &= ~(IE_S_ALL_INTERRUPT_MASK << 1086 IE_S_ALL_INTERRUPT_SHIFT); 1087 iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, tmp); 1088 1089 /* Erase the slave address programmed */ 1090 tmp = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET); 1091 tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT); 1092 iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, tmp); 1093 1094 /* flush TX/RX FIFOs */ 1095 tmp = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT)); 1096 iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, tmp); 1097 1098 /* clear all pending slave interrupts */ 1099 iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE); 1100 1101 iproc_i2c->slave = NULL; 1102 1103 enable_irq(iproc_i2c->irq); 1104 1105 return 0; 1106 } 1107 1108 static const struct of_device_id bcm_iproc_i2c_of_match[] = { 1109 { 1110 .compatible = "brcm,iproc-i2c", 1111 .data = (int *)IPROC_I2C, 1112 }, { 1113 .compatible = "brcm,iproc-nic-i2c", 1114 .data = (int *)IPROC_I2C_NIC, 1115 }, 1116 { /* sentinel */ } 1117 }; 1118 MODULE_DEVICE_TABLE(of, bcm_iproc_i2c_of_match); 1119 1120 static struct platform_driver bcm_iproc_i2c_driver = { 1121 .driver = { 1122 .name = "bcm-iproc-i2c", 1123 .of_match_table = bcm_iproc_i2c_of_match, 1124 .pm = BCM_IPROC_I2C_PM_OPS, 1125 }, 1126 .probe = bcm_iproc_i2c_probe, 1127 .remove = bcm_iproc_i2c_remove, 1128 }; 1129 module_platform_driver(bcm_iproc_i2c_driver); 1130 1131 MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>"); 1132 MODULE_DESCRIPTION("Broadcom iProc I2C Driver"); 1133 MODULE_LICENSE("GPL v2"); 1134