1 /*
2  * Copyright (C) 2014 Broadcom Corporation
3  *
4  * This program is free software; you can redistribute it and/or
5  * modify it under the terms of the GNU General Public License as
6  * published by the Free Software Foundation version 2.
7  *
8  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
9  * kind, whether express or implied; without even the implied warranty
10  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11  * GNU General Public License for more details.
12  */
13 
14 #include <linux/delay.h>
15 #include <linux/i2c.h>
16 #include <linux/interrupt.h>
17 #include <linux/io.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/of_device.h>
21 #include <linux/platform_device.h>
22 #include <linux/slab.h>
23 
24 #define IDM_CTRL_DIRECT_OFFSET       0x00
25 #define CFG_OFFSET                   0x00
26 #define CFG_RESET_SHIFT              31
27 #define CFG_EN_SHIFT                 30
28 #define CFG_SLAVE_ADDR_0_SHIFT       28
29 #define CFG_M_RETRY_CNT_SHIFT        16
30 #define CFG_M_RETRY_CNT_MASK         0x0f
31 
32 #define TIM_CFG_OFFSET               0x04
33 #define TIM_CFG_MODE_400_SHIFT       31
34 #define TIM_RAND_SLAVE_STRETCH_SHIFT      24
35 #define TIM_RAND_SLAVE_STRETCH_MASK       0x7f
36 #define TIM_PERIODIC_SLAVE_STRETCH_SHIFT  16
37 #define TIM_PERIODIC_SLAVE_STRETCH_MASK   0x7f
38 
39 #define S_CFG_SMBUS_ADDR_OFFSET           0x08
40 #define S_CFG_EN_NIC_SMB_ADDR3_SHIFT      31
41 #define S_CFG_NIC_SMB_ADDR3_SHIFT         24
42 #define S_CFG_NIC_SMB_ADDR3_MASK          0x7f
43 #define S_CFG_EN_NIC_SMB_ADDR2_SHIFT      23
44 #define S_CFG_NIC_SMB_ADDR2_SHIFT         16
45 #define S_CFG_NIC_SMB_ADDR2_MASK          0x7f
46 #define S_CFG_EN_NIC_SMB_ADDR1_SHIFT      15
47 #define S_CFG_NIC_SMB_ADDR1_SHIFT         8
48 #define S_CFG_NIC_SMB_ADDR1_MASK          0x7f
49 #define S_CFG_EN_NIC_SMB_ADDR0_SHIFT      7
50 #define S_CFG_NIC_SMB_ADDR0_SHIFT         0
51 #define S_CFG_NIC_SMB_ADDR0_MASK          0x7f
52 
53 #define M_FIFO_CTRL_OFFSET           0x0c
54 #define M_FIFO_RX_FLUSH_SHIFT        31
55 #define M_FIFO_TX_FLUSH_SHIFT        30
56 #define M_FIFO_RX_CNT_SHIFT          16
57 #define M_FIFO_RX_CNT_MASK           0x7f
58 #define M_FIFO_RX_THLD_SHIFT         8
59 #define M_FIFO_RX_THLD_MASK          0x3f
60 
61 #define S_FIFO_CTRL_OFFSET           0x10
62 #define S_FIFO_RX_FLUSH_SHIFT        31
63 #define S_FIFO_TX_FLUSH_SHIFT        30
64 #define S_FIFO_RX_CNT_SHIFT          16
65 #define S_FIFO_RX_CNT_MASK           0x7f
66 #define S_FIFO_RX_THLD_SHIFT         8
67 #define S_FIFO_RX_THLD_MASK          0x3f
68 
69 #define M_CMD_OFFSET                 0x30
70 #define M_CMD_START_BUSY_SHIFT       31
71 #define M_CMD_STATUS_SHIFT           25
72 #define M_CMD_STATUS_MASK            0x07
73 #define M_CMD_STATUS_SUCCESS         0x0
74 #define M_CMD_STATUS_LOST_ARB        0x1
75 #define M_CMD_STATUS_NACK_ADDR       0x2
76 #define M_CMD_STATUS_NACK_DATA       0x3
77 #define M_CMD_STATUS_TIMEOUT         0x4
78 #define M_CMD_STATUS_FIFO_UNDERRUN   0x5
79 #define M_CMD_STATUS_RX_FIFO_FULL    0x6
80 #define M_CMD_PROTOCOL_SHIFT         9
81 #define M_CMD_PROTOCOL_MASK          0xf
82 #define M_CMD_PROTOCOL_QUICK         0x0
83 #define M_CMD_PROTOCOL_BLK_WR        0x7
84 #define M_CMD_PROTOCOL_BLK_RD        0x8
85 #define M_CMD_PROTOCOL_PROCESS       0xa
86 #define M_CMD_PEC_SHIFT              8
87 #define M_CMD_RD_CNT_SHIFT           0
88 #define M_CMD_RD_CNT_MASK            0xff
89 
90 #define S_CMD_OFFSET                 0x34
91 #define S_CMD_START_BUSY_SHIFT       31
92 #define S_CMD_STATUS_SHIFT           23
93 #define S_CMD_STATUS_MASK            0x07
94 #define S_CMD_STATUS_SUCCESS         0x0
95 #define S_CMD_STATUS_TIMEOUT         0x5
96 
97 #define IE_OFFSET                    0x38
98 #define IE_M_RX_FIFO_FULL_SHIFT      31
99 #define IE_M_RX_THLD_SHIFT           30
100 #define IE_M_START_BUSY_SHIFT        28
101 #define IE_M_TX_UNDERRUN_SHIFT       27
102 #define IE_S_RX_FIFO_FULL_SHIFT      26
103 #define IE_S_RX_THLD_SHIFT           25
104 #define IE_S_RX_EVENT_SHIFT          24
105 #define IE_S_START_BUSY_SHIFT        23
106 #define IE_S_TX_UNDERRUN_SHIFT       22
107 #define IE_S_RD_EVENT_SHIFT          21
108 
109 #define IS_OFFSET                    0x3c
110 #define IS_M_RX_FIFO_FULL_SHIFT      31
111 #define IS_M_RX_THLD_SHIFT           30
112 #define IS_M_START_BUSY_SHIFT        28
113 #define IS_M_TX_UNDERRUN_SHIFT       27
114 #define IS_S_RX_FIFO_FULL_SHIFT      26
115 #define IS_S_RX_THLD_SHIFT           25
116 #define IS_S_RX_EVENT_SHIFT          24
117 #define IS_S_START_BUSY_SHIFT        23
118 #define IS_S_TX_UNDERRUN_SHIFT       22
119 #define IS_S_RD_EVENT_SHIFT          21
120 
121 #define M_TX_OFFSET                  0x40
122 #define M_TX_WR_STATUS_SHIFT         31
123 #define M_TX_DATA_SHIFT              0
124 #define M_TX_DATA_MASK               0xff
125 
126 #define M_RX_OFFSET                  0x44
127 #define M_RX_STATUS_SHIFT            30
128 #define M_RX_STATUS_MASK             0x03
129 #define M_RX_PEC_ERR_SHIFT           29
130 #define M_RX_DATA_SHIFT              0
131 #define M_RX_DATA_MASK               0xff
132 
133 #define S_TX_OFFSET                  0x48
134 #define S_TX_WR_STATUS_SHIFT         31
135 #define S_TX_DATA_SHIFT              0
136 #define S_TX_DATA_MASK               0xff
137 
138 #define S_RX_OFFSET                  0x4c
139 #define S_RX_STATUS_SHIFT            30
140 #define S_RX_STATUS_MASK             0x03
141 #define S_RX_PEC_ERR_SHIFT           29
142 #define S_RX_DATA_SHIFT              0
143 #define S_RX_DATA_MASK               0xff
144 
145 #define I2C_TIMEOUT_MSEC             50000
146 #define M_TX_RX_FIFO_SIZE            64
147 #define M_RX_FIFO_MAX_THLD_VALUE     (M_TX_RX_FIFO_SIZE - 1)
148 
149 #define M_RX_MAX_READ_LEN            255
150 #define M_RX_FIFO_THLD_VALUE         50
151 
152 #define IE_M_ALL_INTERRUPT_SHIFT     27
153 #define IE_M_ALL_INTERRUPT_MASK      0x1e
154 
155 #define SLAVE_READ_WRITE_BIT_MASK    0x1
156 #define SLAVE_READ_WRITE_BIT_SHIFT   0x1
157 #define SLAVE_MAX_SIZE_TRANSACTION   64
158 #define SLAVE_CLOCK_STRETCH_TIME     25
159 
160 #define IE_S_ALL_INTERRUPT_SHIFT     21
161 #define IE_S_ALL_INTERRUPT_MASK      0x3f
162 
163 enum i2c_slave_read_status {
164 	I2C_SLAVE_RX_FIFO_EMPTY = 0,
165 	I2C_SLAVE_RX_START,
166 	I2C_SLAVE_RX_DATA,
167 	I2C_SLAVE_RX_END,
168 };
169 
170 enum bus_speed_index {
171 	I2C_SPD_100K = 0,
172 	I2C_SPD_400K,
173 };
174 
175 enum bcm_iproc_i2c_type {
176 	IPROC_I2C,
177 	IPROC_I2C_NIC
178 };
179 
180 struct bcm_iproc_i2c_dev {
181 	struct device *device;
182 	enum bcm_iproc_i2c_type type;
183 	int irq;
184 
185 	void __iomem *base;
186 	void __iomem *idm_base;
187 
188 	u32 ape_addr_mask;
189 
190 	/* lock for indirect access through IDM */
191 	spinlock_t idm_lock;
192 
193 	struct i2c_adapter adapter;
194 	unsigned int bus_speed;
195 
196 	struct completion done;
197 	int xfer_is_done;
198 
199 	struct i2c_msg *msg;
200 
201 	struct i2c_client *slave;
202 
203 	/* bytes that have been transferred */
204 	unsigned int tx_bytes;
205 	/* bytes that have been read */
206 	unsigned int rx_bytes;
207 	unsigned int thld_bytes;
208 };
209 
210 /*
211  * Can be expanded in the future if more interrupt status bits are utilized
212  */
213 #define ISR_MASK (BIT(IS_M_START_BUSY_SHIFT) | BIT(IS_M_TX_UNDERRUN_SHIFT)\
214 		| BIT(IS_M_RX_THLD_SHIFT))
215 
216 #define ISR_MASK_SLAVE (BIT(IS_S_START_BUSY_SHIFT)\
217 		| BIT(IS_S_RX_EVENT_SHIFT) | BIT(IS_S_RD_EVENT_SHIFT)\
218 		| BIT(IS_S_TX_UNDERRUN_SHIFT))
219 
220 static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave);
221 static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave);
222 static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
223 					 bool enable);
224 
225 static inline u32 iproc_i2c_rd_reg(struct bcm_iproc_i2c_dev *iproc_i2c,
226 				   u32 offset)
227 {
228 	u32 val;
229 
230 	if (iproc_i2c->idm_base) {
231 		spin_lock(&iproc_i2c->idm_lock);
232 		writel(iproc_i2c->ape_addr_mask,
233 		       iproc_i2c->idm_base + IDM_CTRL_DIRECT_OFFSET);
234 		val = readl(iproc_i2c->base + offset);
235 		spin_unlock(&iproc_i2c->idm_lock);
236 	} else {
237 		val = readl(iproc_i2c->base + offset);
238 	}
239 
240 	return val;
241 }
242 
243 static inline void iproc_i2c_wr_reg(struct bcm_iproc_i2c_dev *iproc_i2c,
244 				    u32 offset, u32 val)
245 {
246 	if (iproc_i2c->idm_base) {
247 		spin_lock(&iproc_i2c->idm_lock);
248 		writel(iproc_i2c->ape_addr_mask,
249 		       iproc_i2c->idm_base + IDM_CTRL_DIRECT_OFFSET);
250 		writel(val, iproc_i2c->base + offset);
251 		spin_unlock(&iproc_i2c->idm_lock);
252 	} else {
253 		writel(val, iproc_i2c->base + offset);
254 	}
255 }
256 
257 static void bcm_iproc_i2c_slave_init(
258 	struct bcm_iproc_i2c_dev *iproc_i2c, bool need_reset)
259 {
260 	u32 val;
261 
262 	if (need_reset) {
263 		/* put controller in reset */
264 		val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET);
265 		val |= BIT(CFG_RESET_SHIFT);
266 		iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val);
267 
268 		/* wait 100 usec per spec */
269 		udelay(100);
270 
271 		/* bring controller out of reset */
272 		val &= ~(BIT(CFG_RESET_SHIFT));
273 		iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val);
274 	}
275 
276 	/* flush TX/RX FIFOs */
277 	val = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT));
278 	iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, val);
279 
280 	/* Maximum slave stretch time */
281 	val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);
282 	val &= ~(TIM_RAND_SLAVE_STRETCH_MASK << TIM_RAND_SLAVE_STRETCH_SHIFT);
283 	val |= (SLAVE_CLOCK_STRETCH_TIME << TIM_RAND_SLAVE_STRETCH_SHIFT);
284 	iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val);
285 
286 	/* Configure the slave address */
287 	val = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET);
288 	val |= BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT);
289 	val &= ~(S_CFG_NIC_SMB_ADDR3_MASK << S_CFG_NIC_SMB_ADDR3_SHIFT);
290 	val |= (iproc_i2c->slave->addr << S_CFG_NIC_SMB_ADDR3_SHIFT);
291 	iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, val);
292 
293 	/* clear all pending slave interrupts */
294 	iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE);
295 
296 	/* Enable interrupt register to indicate a valid byte in receive fifo */
297 	val = BIT(IE_S_RX_EVENT_SHIFT);
298 	/* Enable interrupt register for the Slave BUSY command */
299 	val |= BIT(IE_S_START_BUSY_SHIFT);
300 	iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
301 }
302 
303 static void bcm_iproc_i2c_check_slave_status(
304 	struct bcm_iproc_i2c_dev *iproc_i2c)
305 {
306 	u32 val;
307 
308 	val = iproc_i2c_rd_reg(iproc_i2c, S_CMD_OFFSET);
309 	/* status is valid only when START_BUSY is cleared after it was set */
310 	if (val & BIT(S_CMD_START_BUSY_SHIFT))
311 		return;
312 
313 	val = (val >> S_CMD_STATUS_SHIFT) & S_CMD_STATUS_MASK;
314 	if (val == S_CMD_STATUS_TIMEOUT) {
315 		dev_err(iproc_i2c->device, "slave random stretch time timeout\n");
316 
317 		/* re-initialize i2c for recovery */
318 		bcm_iproc_i2c_enable_disable(iproc_i2c, false);
319 		bcm_iproc_i2c_slave_init(iproc_i2c, true);
320 		bcm_iproc_i2c_enable_disable(iproc_i2c, true);
321 	}
322 }
323 
324 static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
325 				    u32 status)
326 {
327 	u32 val;
328 	u8 value, rx_status;
329 
330 	/* Slave RX byte receive */
331 	if (status & BIT(IS_S_RX_EVENT_SHIFT)) {
332 		val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET);
333 		rx_status = (val >> S_RX_STATUS_SHIFT) & S_RX_STATUS_MASK;
334 		if (rx_status == I2C_SLAVE_RX_START) {
335 			/* Start of SMBUS for Master write */
336 			i2c_slave_event(iproc_i2c->slave,
337 					I2C_SLAVE_WRITE_REQUESTED, &value);
338 
339 			val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET);
340 			value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK);
341 			i2c_slave_event(iproc_i2c->slave,
342 					I2C_SLAVE_WRITE_RECEIVED, &value);
343 		} else if (status & BIT(IS_S_RD_EVENT_SHIFT)) {
344 			/* Start of SMBUS for Master Read */
345 			i2c_slave_event(iproc_i2c->slave,
346 					I2C_SLAVE_READ_REQUESTED, &value);
347 			iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value);
348 
349 			val = BIT(S_CMD_START_BUSY_SHIFT);
350 			iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val);
351 
352 			/*
353 			 * Enable interrupt for TX FIFO becomes empty and
354 			 * less than PKT_LENGTH bytes were output on the SMBUS
355 			 */
356 			val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
357 			val |= BIT(IE_S_TX_UNDERRUN_SHIFT);
358 			iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
359 		} else {
360 			/* Master write other than start */
361 			value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK);
362 			i2c_slave_event(iproc_i2c->slave,
363 					I2C_SLAVE_WRITE_RECEIVED, &value);
364 			if (rx_status == I2C_SLAVE_RX_END)
365 				i2c_slave_event(iproc_i2c->slave,
366 						I2C_SLAVE_STOP, &value);
367 		}
368 	} else if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) {
369 		/* Master read other than start */
370 		i2c_slave_event(iproc_i2c->slave,
371 				I2C_SLAVE_READ_PROCESSED, &value);
372 
373 		iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value);
374 		val = BIT(S_CMD_START_BUSY_SHIFT);
375 		iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val);
376 	}
377 
378 	/* Stop */
379 	if (status & BIT(IS_S_START_BUSY_SHIFT)) {
380 		i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP, &value);
381 		/*
382 		 * Enable interrupt for TX FIFO becomes empty and
383 		 * less than PKT_LENGTH bytes were output on the SMBUS
384 		 */
385 		val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
386 		val &= ~BIT(IE_S_TX_UNDERRUN_SHIFT);
387 		iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
388 	}
389 
390 	/* clear interrupt status */
391 	iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status);
392 
393 	bcm_iproc_i2c_check_slave_status(iproc_i2c);
394 	return true;
395 }
396 
397 static void bcm_iproc_i2c_read_valid_bytes(struct bcm_iproc_i2c_dev *iproc_i2c)
398 {
399 	struct i2c_msg *msg = iproc_i2c->msg;
400 	uint32_t val;
401 
402 	/* Read valid data from RX FIFO */
403 	while (iproc_i2c->rx_bytes < msg->len) {
404 		val = iproc_i2c_rd_reg(iproc_i2c, M_RX_OFFSET);
405 
406 		/* rx fifo empty */
407 		if (!((val >> M_RX_STATUS_SHIFT) & M_RX_STATUS_MASK))
408 			break;
409 
410 		msg->buf[iproc_i2c->rx_bytes] =
411 			(val >> M_RX_DATA_SHIFT) & M_RX_DATA_MASK;
412 		iproc_i2c->rx_bytes++;
413 	}
414 }
415 
416 static void bcm_iproc_i2c_send(struct bcm_iproc_i2c_dev *iproc_i2c)
417 {
418 	struct i2c_msg *msg = iproc_i2c->msg;
419 	unsigned int tx_bytes = msg->len - iproc_i2c->tx_bytes;
420 	unsigned int i;
421 	u32 val;
422 
423 	/* can only fill up to the FIFO size */
424 	tx_bytes = min_t(unsigned int, tx_bytes, M_TX_RX_FIFO_SIZE);
425 	for (i = 0; i < tx_bytes; i++) {
426 		/* start from where we left over */
427 		unsigned int idx = iproc_i2c->tx_bytes + i;
428 
429 		val = msg->buf[idx];
430 
431 		/* mark the last byte */
432 		if (idx == msg->len - 1) {
433 			val |= BIT(M_TX_WR_STATUS_SHIFT);
434 
435 			if (iproc_i2c->irq) {
436 				u32 tmp;
437 
438 				/*
439 				 * Since this is the last byte, we should now
440 				 * disable TX FIFO underrun interrupt
441 				 */
442 				tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
443 				tmp &= ~BIT(IE_M_TX_UNDERRUN_SHIFT);
444 				iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET,
445 						 tmp);
446 			}
447 		}
448 
449 		/* load data into TX FIFO */
450 		iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val);
451 	}
452 
453 	/* update number of transferred bytes */
454 	iproc_i2c->tx_bytes += tx_bytes;
455 }
456 
457 static void bcm_iproc_i2c_read(struct bcm_iproc_i2c_dev *iproc_i2c)
458 {
459 	struct i2c_msg *msg = iproc_i2c->msg;
460 	u32 bytes_left, val;
461 
462 	bcm_iproc_i2c_read_valid_bytes(iproc_i2c);
463 	bytes_left = msg->len - iproc_i2c->rx_bytes;
464 	if (bytes_left == 0) {
465 		if (iproc_i2c->irq) {
466 			/* finished reading all data, disable rx thld event */
467 			val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
468 			val &= ~BIT(IS_M_RX_THLD_SHIFT);
469 			iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
470 		}
471 	} else if (bytes_left < iproc_i2c->thld_bytes) {
472 		/* set bytes left as threshold */
473 		val = iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET);
474 		val &= ~(M_FIFO_RX_THLD_MASK << M_FIFO_RX_THLD_SHIFT);
475 		val |= (bytes_left << M_FIFO_RX_THLD_SHIFT);
476 		iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);
477 		iproc_i2c->thld_bytes = bytes_left;
478 	}
479 	/*
480 	 * bytes_left >= iproc_i2c->thld_bytes,
481 	 * hence no need to change the THRESHOLD SET.
482 	 * It will remain as iproc_i2c->thld_bytes itself
483 	 */
484 }
485 
486 static void bcm_iproc_i2c_process_m_event(struct bcm_iproc_i2c_dev *iproc_i2c,
487 					  u32 status)
488 {
489 	/* TX FIFO is empty and we have more data to send */
490 	if (status & BIT(IS_M_TX_UNDERRUN_SHIFT))
491 		bcm_iproc_i2c_send(iproc_i2c);
492 
493 	/* RX FIFO threshold is reached and data needs to be read out */
494 	if (status & BIT(IS_M_RX_THLD_SHIFT))
495 		bcm_iproc_i2c_read(iproc_i2c);
496 
497 	/* transfer is done */
498 	if (status & BIT(IS_M_START_BUSY_SHIFT)) {
499 		iproc_i2c->xfer_is_done = 1;
500 		if (iproc_i2c->irq)
501 			complete(&iproc_i2c->done);
502 	}
503 }
504 
505 static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data)
506 {
507 	struct bcm_iproc_i2c_dev *iproc_i2c = data;
508 	u32 status = iproc_i2c_rd_reg(iproc_i2c, IS_OFFSET);
509 	bool ret;
510 	u32 sl_status = status & ISR_MASK_SLAVE;
511 
512 	if (sl_status) {
513 		ret = bcm_iproc_i2c_slave_isr(iproc_i2c, sl_status);
514 		if (ret)
515 			return IRQ_HANDLED;
516 		else
517 			return IRQ_NONE;
518 	}
519 
520 	status &= ISR_MASK;
521 	if (!status)
522 		return IRQ_NONE;
523 
524 	/* process all master based events */
525 	bcm_iproc_i2c_process_m_event(iproc_i2c, status);
526 	iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status);
527 
528 	return IRQ_HANDLED;
529 }
530 
531 static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c)
532 {
533 	u32 val;
534 
535 	/* put controller in reset */
536 	val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET);
537 	val |= BIT(CFG_RESET_SHIFT);
538 	val &= ~(BIT(CFG_EN_SHIFT));
539 	iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val);
540 
541 	/* wait 100 usec per spec */
542 	udelay(100);
543 
544 	/* bring controller out of reset */
545 	val &= ~(BIT(CFG_RESET_SHIFT));
546 	iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val);
547 
548 	/* flush TX/RX FIFOs and set RX FIFO threshold to zero */
549 	val = (BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT));
550 	iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);
551 	/* disable all interrupts */
552 	val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
553 	val &= ~(IE_M_ALL_INTERRUPT_MASK <<
554 			IE_M_ALL_INTERRUPT_SHIFT);
555 	iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
556 
557 	/* clear all pending interrupts */
558 	iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, 0xffffffff);
559 
560 	return 0;
561 }
562 
563 static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
564 					 bool enable)
565 {
566 	u32 val;
567 
568 	val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET);
569 	if (enable)
570 		val |= BIT(CFG_EN_SHIFT);
571 	else
572 		val &= ~BIT(CFG_EN_SHIFT);
573 	iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val);
574 }
575 
576 static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c,
577 				      struct i2c_msg *msg)
578 {
579 	u32 val;
580 
581 	val = iproc_i2c_rd_reg(iproc_i2c, M_CMD_OFFSET);
582 	val = (val >> M_CMD_STATUS_SHIFT) & M_CMD_STATUS_MASK;
583 
584 	switch (val) {
585 	case M_CMD_STATUS_SUCCESS:
586 		return 0;
587 
588 	case M_CMD_STATUS_LOST_ARB:
589 		dev_dbg(iproc_i2c->device, "lost bus arbitration\n");
590 		return -EAGAIN;
591 
592 	case M_CMD_STATUS_NACK_ADDR:
593 		dev_dbg(iproc_i2c->device, "NAK addr:0x%02x\n", msg->addr);
594 		return -ENXIO;
595 
596 	case M_CMD_STATUS_NACK_DATA:
597 		dev_dbg(iproc_i2c->device, "NAK data\n");
598 		return -ENXIO;
599 
600 	case M_CMD_STATUS_TIMEOUT:
601 		dev_dbg(iproc_i2c->device, "bus timeout\n");
602 		return -ETIMEDOUT;
603 
604 	case M_CMD_STATUS_FIFO_UNDERRUN:
605 		dev_dbg(iproc_i2c->device, "FIFO under-run\n");
606 		return -ENXIO;
607 
608 	case M_CMD_STATUS_RX_FIFO_FULL:
609 		dev_dbg(iproc_i2c->device, "RX FIFO full\n");
610 		return -ETIMEDOUT;
611 
612 	default:
613 		dev_dbg(iproc_i2c->device, "unknown error code=%d\n", val);
614 
615 		/* re-initialize i2c for recovery */
616 		bcm_iproc_i2c_enable_disable(iproc_i2c, false);
617 		bcm_iproc_i2c_init(iproc_i2c);
618 		bcm_iproc_i2c_enable_disable(iproc_i2c, true);
619 
620 		return -EIO;
621 	}
622 }
623 
624 static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c,
625 				   struct i2c_msg *msg,
626 				   u32 cmd)
627 {
628 	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MSEC);
629 	u32 val, status;
630 	int ret;
631 
632 	iproc_i2c_wr_reg(iproc_i2c, M_CMD_OFFSET, cmd);
633 
634 	if (iproc_i2c->irq) {
635 		time_left = wait_for_completion_timeout(&iproc_i2c->done,
636 							time_left);
637 		/* disable all interrupts */
638 		iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0);
639 		/* read it back to flush the write */
640 		iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
641 		/* make sure the interrupt handler isn't running */
642 		synchronize_irq(iproc_i2c->irq);
643 
644 	} else { /* polling mode */
645 		unsigned long timeout = jiffies + time_left;
646 
647 		do {
648 			status = iproc_i2c_rd_reg(iproc_i2c,
649 						  IS_OFFSET) & ISR_MASK;
650 			bcm_iproc_i2c_process_m_event(iproc_i2c, status);
651 			iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status);
652 
653 			if (time_after(jiffies, timeout)) {
654 				time_left = 0;
655 				break;
656 			}
657 
658 			cpu_relax();
659 			cond_resched();
660 		} while (!iproc_i2c->xfer_is_done);
661 	}
662 
663 	if (!time_left && !iproc_i2c->xfer_is_done) {
664 		dev_err(iproc_i2c->device, "transaction timed out\n");
665 
666 		/* flush both TX/RX FIFOs */
667 		val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT);
668 		iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);
669 		return -ETIMEDOUT;
670 	}
671 
672 	ret = bcm_iproc_i2c_check_status(iproc_i2c, msg);
673 	if (ret) {
674 		/* flush both TX/RX FIFOs */
675 		val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT);
676 		iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);
677 		return ret;
678 	}
679 
680 	return 0;
681 }
682 
683 /*
684  * If 'process_call' is true, then this is a multi-msg transfer that requires
685  * a repeated start between the messages.
686  * More specifically, it must be a write (reg) followed by a read (data).
687  * The i2c quirks are set to enforce this rule.
688  */
689 static int bcm_iproc_i2c_xfer_internal(struct bcm_iproc_i2c_dev *iproc_i2c,
690 					struct i2c_msg *msgs, bool process_call)
691 {
692 	int i;
693 	u8 addr;
694 	u32 val, tmp, val_intr_en;
695 	unsigned int tx_bytes;
696 	struct i2c_msg *msg = &msgs[0];
697 
698 	/* check if bus is busy */
699 	if (!!(iproc_i2c_rd_reg(iproc_i2c,
700 				M_CMD_OFFSET) & BIT(M_CMD_START_BUSY_SHIFT))) {
701 		dev_warn(iproc_i2c->device, "bus is busy\n");
702 		return -EBUSY;
703 	}
704 
705 	iproc_i2c->msg = msg;
706 
707 	/* format and load slave address into the TX FIFO */
708 	addr = i2c_8bit_addr_from_msg(msg);
709 	iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, addr);
710 
711 	/*
712 	 * For a write transaction, load data into the TX FIFO. Only allow
713 	 * loading up to TX FIFO size - 1 bytes of data since the first byte
714 	 * has been used up by the slave address
715 	 */
716 	tx_bytes = min_t(unsigned int, msg->len, M_TX_RX_FIFO_SIZE - 1);
717 	if (!(msg->flags & I2C_M_RD)) {
718 		for (i = 0; i < tx_bytes; i++) {
719 			val = msg->buf[i];
720 
721 			/* mark the last byte */
722 			if (!process_call && (i == msg->len - 1))
723 				val |= 1 << M_TX_WR_STATUS_SHIFT;
724 
725 			iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val);
726 		}
727 		iproc_i2c->tx_bytes = tx_bytes;
728 	}
729 
730 	/* Process the read message if this is process call */
731 	if (process_call) {
732 		msg++;
733 		iproc_i2c->msg = msg;  /* point to second msg */
734 
735 		/*
736 		 * The last byte to be sent out should be a slave
737 		 * address with read operation
738 		 */
739 		addr = i2c_8bit_addr_from_msg(msg);
740 		/* mark it the last byte out */
741 		val = addr | (1 << M_TX_WR_STATUS_SHIFT);
742 		iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val);
743 	}
744 
745 	/* mark as incomplete before starting the transaction */
746 	if (iproc_i2c->irq)
747 		reinit_completion(&iproc_i2c->done);
748 
749 	iproc_i2c->xfer_is_done = 0;
750 
751 	/*
752 	 * Enable the "start busy" interrupt, which will be triggered after the
753 	 * transaction is done, i.e., the internal start_busy bit, transitions
754 	 * from 1 to 0.
755 	 */
756 	val_intr_en = BIT(IE_M_START_BUSY_SHIFT);
757 
758 	/*
759 	 * If TX data size is larger than the TX FIFO, need to enable TX
760 	 * underrun interrupt, which will be triggerred when the TX FIFO is
761 	 * empty. When that happens we can then pump more data into the FIFO
762 	 */
763 	if (!process_call && !(msg->flags & I2C_M_RD) &&
764 	    msg->len > iproc_i2c->tx_bytes)
765 		val_intr_en |= BIT(IE_M_TX_UNDERRUN_SHIFT);
766 
767 	/*
768 	 * Now we can activate the transfer. For a read operation, specify the
769 	 * number of bytes to read
770 	 */
771 	val = BIT(M_CMD_START_BUSY_SHIFT);
772 
773 	if (msg->len == 0) {
774 		/* SMBUS QUICK Command (Read/Write) */
775 		val |= (M_CMD_PROTOCOL_QUICK << M_CMD_PROTOCOL_SHIFT);
776 	} else if (msg->flags & I2C_M_RD) {
777 		u32 protocol;
778 
779 		iproc_i2c->rx_bytes = 0;
780 		if (msg->len > M_RX_FIFO_MAX_THLD_VALUE)
781 			iproc_i2c->thld_bytes = M_RX_FIFO_THLD_VALUE;
782 		else
783 			iproc_i2c->thld_bytes = msg->len;
784 
785 		/* set threshold value */
786 		tmp = iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET);
787 		tmp &= ~(M_FIFO_RX_THLD_MASK << M_FIFO_RX_THLD_SHIFT);
788 		tmp |= iproc_i2c->thld_bytes << M_FIFO_RX_THLD_SHIFT;
789 		iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, tmp);
790 
791 		/* enable the RX threshold interrupt */
792 		val_intr_en |= BIT(IE_M_RX_THLD_SHIFT);
793 
794 		protocol = process_call ?
795 				M_CMD_PROTOCOL_PROCESS : M_CMD_PROTOCOL_BLK_RD;
796 
797 		val |= (protocol << M_CMD_PROTOCOL_SHIFT) |
798 		       (msg->len << M_CMD_RD_CNT_SHIFT);
799 	} else {
800 		val |= (M_CMD_PROTOCOL_BLK_WR << M_CMD_PROTOCOL_SHIFT);
801 	}
802 
803 	if (iproc_i2c->irq)
804 		iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val_intr_en);
805 
806 	return bcm_iproc_i2c_xfer_wait(iproc_i2c, msg, val);
807 }
808 
809 static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter,
810 			      struct i2c_msg msgs[], int num)
811 {
812 	struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adapter);
813 	bool process_call = false;
814 	int ret;
815 
816 	if (num == 2) {
817 		/* Repeated start, use process call */
818 		process_call = true;
819 		if (msgs[1].flags & I2C_M_NOSTART) {
820 			dev_err(iproc_i2c->device, "Invalid repeated start\n");
821 			return -EOPNOTSUPP;
822 		}
823 	}
824 
825 	ret = bcm_iproc_i2c_xfer_internal(iproc_i2c, msgs, process_call);
826 	if (ret) {
827 		dev_dbg(iproc_i2c->device, "xfer failed\n");
828 		return ret;
829 	}
830 
831 	return num;
832 }
833 
834 static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap)
835 {
836 	u32 val;
837 
838 	val = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
839 
840 	if (adap->algo->reg_slave)
841 		val |= I2C_FUNC_SLAVE;
842 
843 	return val;
844 }
845 
846 static struct i2c_algorithm bcm_iproc_algo = {
847 	.master_xfer = bcm_iproc_i2c_xfer,
848 	.functionality = bcm_iproc_i2c_functionality,
849 	.reg_slave = bcm_iproc_i2c_reg_slave,
850 	.unreg_slave = bcm_iproc_i2c_unreg_slave,
851 };
852 
853 static const struct i2c_adapter_quirks bcm_iproc_i2c_quirks = {
854 	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
855 	.max_comb_1st_msg_len = M_TX_RX_FIFO_SIZE,
856 	.max_read_len = M_RX_MAX_READ_LEN,
857 };
858 
859 static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c)
860 {
861 	unsigned int bus_speed;
862 	u32 val;
863 	int ret = of_property_read_u32(iproc_i2c->device->of_node,
864 				       "clock-frequency", &bus_speed);
865 	if (ret < 0) {
866 		dev_info(iproc_i2c->device,
867 			"unable to interpret clock-frequency DT property\n");
868 		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
869 	}
870 
871 	if (bus_speed < I2C_MAX_STANDARD_MODE_FREQ) {
872 		dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n",
873 			bus_speed);
874 		dev_err(iproc_i2c->device,
875 			"valid speeds are 100khz and 400khz\n");
876 		return -EINVAL;
877 	} else if (bus_speed < I2C_MAX_FAST_MODE_FREQ) {
878 		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
879 	} else {
880 		bus_speed = I2C_MAX_FAST_MODE_FREQ;
881 	}
882 
883 	iproc_i2c->bus_speed = bus_speed;
884 	val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);
885 	val &= ~BIT(TIM_CFG_MODE_400_SHIFT);
886 	val |= (bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT;
887 	iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val);
888 
889 	dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed);
890 
891 	return 0;
892 }
893 
894 static int bcm_iproc_i2c_probe(struct platform_device *pdev)
895 {
896 	int irq, ret = 0;
897 	struct bcm_iproc_i2c_dev *iproc_i2c;
898 	struct i2c_adapter *adap;
899 	struct resource *res;
900 
901 	iproc_i2c = devm_kzalloc(&pdev->dev, sizeof(*iproc_i2c),
902 				 GFP_KERNEL);
903 	if (!iproc_i2c)
904 		return -ENOMEM;
905 
906 	platform_set_drvdata(pdev, iproc_i2c);
907 	iproc_i2c->device = &pdev->dev;
908 	iproc_i2c->type =
909 		(enum bcm_iproc_i2c_type)of_device_get_match_data(&pdev->dev);
910 	init_completion(&iproc_i2c->done);
911 
912 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
913 	iproc_i2c->base = devm_ioremap_resource(iproc_i2c->device, res);
914 	if (IS_ERR(iproc_i2c->base))
915 		return PTR_ERR(iproc_i2c->base);
916 
917 	if (iproc_i2c->type == IPROC_I2C_NIC) {
918 		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
919 		iproc_i2c->idm_base = devm_ioremap_resource(iproc_i2c->device,
920 							    res);
921 		if (IS_ERR(iproc_i2c->idm_base))
922 			return PTR_ERR(iproc_i2c->idm_base);
923 
924 		ret = of_property_read_u32(iproc_i2c->device->of_node,
925 					   "brcm,ape-hsls-addr-mask",
926 					   &iproc_i2c->ape_addr_mask);
927 		if (ret < 0) {
928 			dev_err(iproc_i2c->device,
929 				"'brcm,ape-hsls-addr-mask' missing\n");
930 			return -EINVAL;
931 		}
932 
933 		spin_lock_init(&iproc_i2c->idm_lock);
934 
935 		/* no slave support */
936 		bcm_iproc_algo.reg_slave = NULL;
937 		bcm_iproc_algo.unreg_slave = NULL;
938 	}
939 
940 	ret = bcm_iproc_i2c_init(iproc_i2c);
941 	if (ret)
942 		return ret;
943 
944 	ret = bcm_iproc_i2c_cfg_speed(iproc_i2c);
945 	if (ret)
946 		return ret;
947 
948 	irq = platform_get_irq(pdev, 0);
949 	if (irq > 0) {
950 		ret = devm_request_irq(iproc_i2c->device, irq,
951 				       bcm_iproc_i2c_isr, 0, pdev->name,
952 				       iproc_i2c);
953 		if (ret < 0) {
954 			dev_err(iproc_i2c->device,
955 				"unable to request irq %i\n", irq);
956 			return ret;
957 		}
958 
959 		iproc_i2c->irq = irq;
960 	} else {
961 		dev_warn(iproc_i2c->device,
962 			 "no irq resource, falling back to poll mode\n");
963 	}
964 
965 	bcm_iproc_i2c_enable_disable(iproc_i2c, true);
966 
967 	adap = &iproc_i2c->adapter;
968 	i2c_set_adapdata(adap, iproc_i2c);
969 	snprintf(adap->name, sizeof(adap->name),
970 		"Broadcom iProc (%s)",
971 		of_node_full_name(iproc_i2c->device->of_node));
972 	adap->algo = &bcm_iproc_algo;
973 	adap->quirks = &bcm_iproc_i2c_quirks;
974 	adap->dev.parent = &pdev->dev;
975 	adap->dev.of_node = pdev->dev.of_node;
976 
977 	return i2c_add_adapter(adap);
978 }
979 
980 static int bcm_iproc_i2c_remove(struct platform_device *pdev)
981 {
982 	struct bcm_iproc_i2c_dev *iproc_i2c = platform_get_drvdata(pdev);
983 
984 	if (iproc_i2c->irq) {
985 		/*
986 		 * Make sure there's no pending interrupt when we remove the
987 		 * adapter
988 		 */
989 		iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0);
990 		iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
991 		synchronize_irq(iproc_i2c->irq);
992 	}
993 
994 	i2c_del_adapter(&iproc_i2c->adapter);
995 	bcm_iproc_i2c_enable_disable(iproc_i2c, false);
996 
997 	return 0;
998 }
999 
1000 #ifdef CONFIG_PM_SLEEP
1001 
1002 static int bcm_iproc_i2c_suspend(struct device *dev)
1003 {
1004 	struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev);
1005 
1006 	if (iproc_i2c->irq) {
1007 		/*
1008 		 * Make sure there's no pending interrupt when we go into
1009 		 * suspend
1010 		 */
1011 		iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0);
1012 		iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
1013 		synchronize_irq(iproc_i2c->irq);
1014 	}
1015 
1016 	/* now disable the controller */
1017 	bcm_iproc_i2c_enable_disable(iproc_i2c, false);
1018 
1019 	return 0;
1020 }
1021 
1022 static int bcm_iproc_i2c_resume(struct device *dev)
1023 {
1024 	struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev);
1025 	int ret;
1026 	u32 val;
1027 
1028 	/*
1029 	 * Power domain could have been shut off completely in system deep
1030 	 * sleep, so re-initialize the block here
1031 	 */
1032 	ret = bcm_iproc_i2c_init(iproc_i2c);
1033 	if (ret)
1034 		return ret;
1035 
1036 	/* configure to the desired bus speed */
1037 	val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);
1038 	val &= ~BIT(TIM_CFG_MODE_400_SHIFT);
1039 	val |= (iproc_i2c->bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT;
1040 	iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val);
1041 
1042 	bcm_iproc_i2c_enable_disable(iproc_i2c, true);
1043 
1044 	return 0;
1045 }
1046 
1047 static const struct dev_pm_ops bcm_iproc_i2c_pm_ops = {
1048 	.suspend_late = &bcm_iproc_i2c_suspend,
1049 	.resume_early = &bcm_iproc_i2c_resume
1050 };
1051 
1052 #define BCM_IPROC_I2C_PM_OPS (&bcm_iproc_i2c_pm_ops)
1053 #else
1054 #define BCM_IPROC_I2C_PM_OPS NULL
1055 #endif /* CONFIG_PM_SLEEP */
1056 
1057 
1058 static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave)
1059 {
1060 	struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter);
1061 
1062 	if (iproc_i2c->slave)
1063 		return -EBUSY;
1064 
1065 	if (slave->flags & I2C_CLIENT_TEN)
1066 		return -EAFNOSUPPORT;
1067 
1068 	iproc_i2c->slave = slave;
1069 	bcm_iproc_i2c_slave_init(iproc_i2c, false);
1070 	return 0;
1071 }
1072 
1073 static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave)
1074 {
1075 	u32 tmp;
1076 	struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter);
1077 
1078 	if (!iproc_i2c->slave)
1079 		return -EINVAL;
1080 
1081 	iproc_i2c->slave = NULL;
1082 
1083 	/* disable all slave interrupts */
1084 	tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
1085 	tmp &= ~(IE_S_ALL_INTERRUPT_MASK <<
1086 			IE_S_ALL_INTERRUPT_SHIFT);
1087 	iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, tmp);
1088 
1089 	/* Erase the slave address programmed */
1090 	tmp = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET);
1091 	tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT);
1092 	iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, tmp);
1093 
1094 	return 0;
1095 }
1096 
1097 static const struct of_device_id bcm_iproc_i2c_of_match[] = {
1098 	{
1099 		.compatible = "brcm,iproc-i2c",
1100 		.data = (int *)IPROC_I2C,
1101 	}, {
1102 		.compatible = "brcm,iproc-nic-i2c",
1103 		.data = (int *)IPROC_I2C_NIC,
1104 	},
1105 	{ /* sentinel */ }
1106 };
1107 MODULE_DEVICE_TABLE(of, bcm_iproc_i2c_of_match);
1108 
1109 static struct platform_driver bcm_iproc_i2c_driver = {
1110 	.driver = {
1111 		.name = "bcm-iproc-i2c",
1112 		.of_match_table = bcm_iproc_i2c_of_match,
1113 		.pm = BCM_IPROC_I2C_PM_OPS,
1114 	},
1115 	.probe = bcm_iproc_i2c_probe,
1116 	.remove = bcm_iproc_i2c_remove,
1117 };
1118 module_platform_driver(bcm_iproc_i2c_driver);
1119 
1120 MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
1121 MODULE_DESCRIPTION("Broadcom iProc I2C Driver");
1122 MODULE_LICENSE("GPL v2");
1123