1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Aspeed 24XX/25XX I2C Controller. 4 * 5 * Copyright (C) 2012-2017 ASPEED Technology Inc. 6 * Copyright 2017 IBM Corporation 7 * Copyright 2017 Google, Inc. 8 */ 9 10 #include <linux/clk.h> 11 #include <linux/completion.h> 12 #include <linux/err.h> 13 #include <linux/errno.h> 14 #include <linux/i2c.h> 15 #include <linux/init.h> 16 #include <linux/interrupt.h> 17 #include <linux/io.h> 18 #include <linux/irq.h> 19 #include <linux/irqchip/chained_irq.h> 20 #include <linux/irqdomain.h> 21 #include <linux/kernel.h> 22 #include <linux/module.h> 23 #include <linux/of_address.h> 24 #include <linux/of_irq.h> 25 #include <linux/of_platform.h> 26 #include <linux/platform_device.h> 27 #include <linux/reset.h> 28 #include <linux/slab.h> 29 30 /* I2C Register */ 31 #define ASPEED_I2C_FUN_CTRL_REG 0x00 32 #define ASPEED_I2C_AC_TIMING_REG1 0x04 33 #define ASPEED_I2C_AC_TIMING_REG2 0x08 34 #define ASPEED_I2C_INTR_CTRL_REG 0x0c 35 #define ASPEED_I2C_INTR_STS_REG 0x10 36 #define ASPEED_I2C_CMD_REG 0x14 37 #define ASPEED_I2C_DEV_ADDR_REG 0x18 38 #define ASPEED_I2C_BYTE_BUF_REG 0x20 39 40 /* Global Register Definition */ 41 /* 0x00 : I2C Interrupt Status Register */ 42 /* 0x08 : I2C Interrupt Target Assignment */ 43 44 /* Device Register Definition */ 45 /* 0x00 : I2CD Function Control Register */ 46 #define ASPEED_I2CD_MULTI_MASTER_DIS BIT(15) 47 #define ASPEED_I2CD_SDA_DRIVE_1T_EN BIT(8) 48 #define ASPEED_I2CD_M_SDA_DRIVE_1T_EN BIT(7) 49 #define ASPEED_I2CD_M_HIGH_SPEED_EN BIT(6) 50 #define ASPEED_I2CD_SLAVE_EN BIT(1) 51 #define ASPEED_I2CD_MASTER_EN BIT(0) 52 53 /* 0x04 : I2CD Clock and AC Timing Control Register #1 */ 54 #define ASPEED_I2CD_TIME_TBUF_MASK GENMASK(31, 28) 55 #define ASPEED_I2CD_TIME_THDSTA_MASK GENMASK(27, 24) 56 #define ASPEED_I2CD_TIME_TACST_MASK GENMASK(23, 20) 57 #define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT 16 58 #define ASPEED_I2CD_TIME_SCL_HIGH_MASK GENMASK(19, 16) 59 #define ASPEED_I2CD_TIME_SCL_LOW_SHIFT 12 60 #define ASPEED_I2CD_TIME_SCL_LOW_MASK GENMASK(15, 12) 61 #define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK GENMASK(3, 0) 62 #define ASPEED_I2CD_TIME_SCL_REG_MAX GENMASK(3, 0) 63 /* 0x08 : I2CD Clock and AC Timing Control Register #2 */ 64 #define ASPEED_NO_TIMEOUT_CTRL 0 65 66 /* 0x0c : I2CD Interrupt Control Register & 67 * 0x10 : I2CD Interrupt Status Register 68 * 69 * These share bit definitions, so use the same values for the enable & 70 * status bits. 71 */ 72 #define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14) 73 #define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13) 74 #define ASPEED_I2CD_INTR_SLAVE_MATCH BIT(7) 75 #define ASPEED_I2CD_INTR_SCL_TIMEOUT BIT(6) 76 #define ASPEED_I2CD_INTR_ABNORMAL BIT(5) 77 #define ASPEED_I2CD_INTR_NORMAL_STOP BIT(4) 78 #define ASPEED_I2CD_INTR_ARBIT_LOSS BIT(3) 79 #define ASPEED_I2CD_INTR_RX_DONE BIT(2) 80 #define ASPEED_I2CD_INTR_TX_NAK BIT(1) 81 #define ASPEED_I2CD_INTR_TX_ACK BIT(0) 82 #define ASPEED_I2CD_INTR_MASTER_ERRORS \ 83 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \ 84 ASPEED_I2CD_INTR_SCL_TIMEOUT | \ 85 ASPEED_I2CD_INTR_ABNORMAL | \ 86 ASPEED_I2CD_INTR_ARBIT_LOSS) 87 #define ASPEED_I2CD_INTR_ALL \ 88 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \ 89 ASPEED_I2CD_INTR_BUS_RECOVER_DONE | \ 90 ASPEED_I2CD_INTR_SCL_TIMEOUT | \ 91 ASPEED_I2CD_INTR_ABNORMAL | \ 92 ASPEED_I2CD_INTR_NORMAL_STOP | \ 93 ASPEED_I2CD_INTR_ARBIT_LOSS | \ 94 ASPEED_I2CD_INTR_RX_DONE | \ 95 ASPEED_I2CD_INTR_TX_NAK | \ 96 ASPEED_I2CD_INTR_TX_ACK) 97 98 /* 0x14 : I2CD Command/Status Register */ 99 #define ASPEED_I2CD_SCL_LINE_STS BIT(18) 100 #define ASPEED_I2CD_SDA_LINE_STS BIT(17) 101 #define ASPEED_I2CD_BUS_BUSY_STS BIT(16) 102 #define ASPEED_I2CD_BUS_RECOVER_CMD BIT(11) 103 104 /* Command Bit */ 105 #define ASPEED_I2CD_M_STOP_CMD BIT(5) 106 #define ASPEED_I2CD_M_S_RX_CMD_LAST BIT(4) 107 #define ASPEED_I2CD_M_RX_CMD BIT(3) 108 #define ASPEED_I2CD_S_TX_CMD BIT(2) 109 #define ASPEED_I2CD_M_TX_CMD BIT(1) 110 #define ASPEED_I2CD_M_START_CMD BIT(0) 111 #define ASPEED_I2CD_MASTER_CMDS_MASK \ 112 (ASPEED_I2CD_M_STOP_CMD | \ 113 ASPEED_I2CD_M_S_RX_CMD_LAST | \ 114 ASPEED_I2CD_M_RX_CMD | \ 115 ASPEED_I2CD_M_TX_CMD | \ 116 ASPEED_I2CD_M_START_CMD) 117 118 /* 0x18 : I2CD Slave Device Address Register */ 119 #define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0) 120 121 enum aspeed_i2c_master_state { 122 ASPEED_I2C_MASTER_INACTIVE, 123 ASPEED_I2C_MASTER_PENDING, 124 ASPEED_I2C_MASTER_START, 125 ASPEED_I2C_MASTER_TX_FIRST, 126 ASPEED_I2C_MASTER_TX, 127 ASPEED_I2C_MASTER_RX_FIRST, 128 ASPEED_I2C_MASTER_RX, 129 ASPEED_I2C_MASTER_STOP, 130 }; 131 132 enum aspeed_i2c_slave_state { 133 ASPEED_I2C_SLAVE_INACTIVE, 134 ASPEED_I2C_SLAVE_START, 135 ASPEED_I2C_SLAVE_READ_REQUESTED, 136 ASPEED_I2C_SLAVE_READ_PROCESSED, 137 ASPEED_I2C_SLAVE_WRITE_REQUESTED, 138 ASPEED_I2C_SLAVE_WRITE_RECEIVED, 139 ASPEED_I2C_SLAVE_STOP, 140 }; 141 142 struct aspeed_i2c_bus { 143 struct i2c_adapter adap; 144 struct device *dev; 145 void __iomem *base; 146 struct reset_control *rst; 147 /* Synchronizes I/O mem access to base. */ 148 spinlock_t lock; 149 struct completion cmd_complete; 150 u32 (*get_clk_reg_val)(struct device *dev, 151 u32 divisor); 152 unsigned long parent_clk_frequency; 153 u32 bus_frequency; 154 /* Transaction state. */ 155 enum aspeed_i2c_master_state master_state; 156 struct i2c_msg *msgs; 157 size_t buf_index; 158 size_t msgs_index; 159 size_t msgs_count; 160 bool send_stop; 161 int cmd_err; 162 /* Protected only by i2c_lock_bus */ 163 int master_xfer_result; 164 /* Multi-master */ 165 bool multi_master; 166 #if IS_ENABLED(CONFIG_I2C_SLAVE) 167 struct i2c_client *slave; 168 enum aspeed_i2c_slave_state slave_state; 169 #endif /* CONFIG_I2C_SLAVE */ 170 }; 171 172 static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus); 173 174 static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus) 175 { 176 unsigned long time_left, flags; 177 int ret = 0; 178 u32 command; 179 180 spin_lock_irqsave(&bus->lock, flags); 181 command = readl(bus->base + ASPEED_I2C_CMD_REG); 182 183 if (command & ASPEED_I2CD_SDA_LINE_STS) { 184 /* Bus is idle: no recovery needed. */ 185 if (command & ASPEED_I2CD_SCL_LINE_STS) 186 goto out; 187 dev_dbg(bus->dev, "SCL hung (state %x), attempting recovery\n", 188 command); 189 190 reinit_completion(&bus->cmd_complete); 191 writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG); 192 spin_unlock_irqrestore(&bus->lock, flags); 193 194 time_left = wait_for_completion_timeout( 195 &bus->cmd_complete, bus->adap.timeout); 196 197 spin_lock_irqsave(&bus->lock, flags); 198 if (time_left == 0) 199 goto reset_out; 200 else if (bus->cmd_err) 201 goto reset_out; 202 /* Recovery failed. */ 203 else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) & 204 ASPEED_I2CD_SCL_LINE_STS)) 205 goto reset_out; 206 /* Bus error. */ 207 } else { 208 dev_dbg(bus->dev, "SDA hung (state %x), attempting recovery\n", 209 command); 210 211 reinit_completion(&bus->cmd_complete); 212 /* Writes 1 to 8 SCL clock cycles until SDA is released. */ 213 writel(ASPEED_I2CD_BUS_RECOVER_CMD, 214 bus->base + ASPEED_I2C_CMD_REG); 215 spin_unlock_irqrestore(&bus->lock, flags); 216 217 time_left = wait_for_completion_timeout( 218 &bus->cmd_complete, bus->adap.timeout); 219 220 spin_lock_irqsave(&bus->lock, flags); 221 if (time_left == 0) 222 goto reset_out; 223 else if (bus->cmd_err) 224 goto reset_out; 225 /* Recovery failed. */ 226 else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) & 227 ASPEED_I2CD_SDA_LINE_STS)) 228 goto reset_out; 229 } 230 231 out: 232 spin_unlock_irqrestore(&bus->lock, flags); 233 234 return ret; 235 236 reset_out: 237 spin_unlock_irqrestore(&bus->lock, flags); 238 239 return aspeed_i2c_reset(bus); 240 } 241 242 #if IS_ENABLED(CONFIG_I2C_SLAVE) 243 static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status) 244 { 245 u32 command, irq_handled = 0; 246 struct i2c_client *slave = bus->slave; 247 u8 value; 248 249 if (!slave) 250 return 0; 251 252 command = readl(bus->base + ASPEED_I2C_CMD_REG); 253 254 /* Slave was requested, restart state machine. */ 255 if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) { 256 irq_handled |= ASPEED_I2CD_INTR_SLAVE_MATCH; 257 bus->slave_state = ASPEED_I2C_SLAVE_START; 258 } 259 260 /* Slave is not currently active, irq was for someone else. */ 261 if (bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE) 262 return irq_handled; 263 264 dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n", 265 irq_status, command); 266 267 /* Slave was sent something. */ 268 if (irq_status & ASPEED_I2CD_INTR_RX_DONE) { 269 value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8; 270 /* Handle address frame. */ 271 if (bus->slave_state == ASPEED_I2C_SLAVE_START) { 272 if (value & 0x1) 273 bus->slave_state = 274 ASPEED_I2C_SLAVE_READ_REQUESTED; 275 else 276 bus->slave_state = 277 ASPEED_I2C_SLAVE_WRITE_REQUESTED; 278 } 279 irq_handled |= ASPEED_I2CD_INTR_RX_DONE; 280 } 281 282 /* Slave was asked to stop. */ 283 if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) { 284 irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP; 285 bus->slave_state = ASPEED_I2C_SLAVE_STOP; 286 } 287 if (irq_status & ASPEED_I2CD_INTR_TX_NAK && 288 bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) { 289 irq_handled |= ASPEED_I2CD_INTR_TX_NAK; 290 bus->slave_state = ASPEED_I2C_SLAVE_STOP; 291 } 292 293 switch (bus->slave_state) { 294 case ASPEED_I2C_SLAVE_READ_REQUESTED: 295 if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_ACK)) 296 dev_err(bus->dev, "Unexpected ACK on read request.\n"); 297 bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED; 298 i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value); 299 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG); 300 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG); 301 break; 302 case ASPEED_I2C_SLAVE_READ_PROCESSED: 303 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { 304 dev_err(bus->dev, 305 "Expected ACK after processed read.\n"); 306 break; 307 } 308 irq_handled |= ASPEED_I2CD_INTR_TX_ACK; 309 i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value); 310 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG); 311 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG); 312 break; 313 case ASPEED_I2C_SLAVE_WRITE_REQUESTED: 314 bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED; 315 i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); 316 break; 317 case ASPEED_I2C_SLAVE_WRITE_RECEIVED: 318 i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value); 319 break; 320 case ASPEED_I2C_SLAVE_STOP: 321 i2c_slave_event(slave, I2C_SLAVE_STOP, &value); 322 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; 323 break; 324 case ASPEED_I2C_SLAVE_START: 325 /* Slave was just started. Waiting for the next event. */; 326 break; 327 default: 328 dev_err(bus->dev, "unknown slave_state: %d\n", 329 bus->slave_state); 330 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; 331 break; 332 } 333 334 return irq_handled; 335 } 336 #endif /* CONFIG_I2C_SLAVE */ 337 338 /* precondition: bus.lock has been acquired. */ 339 static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus) 340 { 341 u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD; 342 struct i2c_msg *msg = &bus->msgs[bus->msgs_index]; 343 u8 slave_addr = i2c_8bit_addr_from_msg(msg); 344 345 #if IS_ENABLED(CONFIG_I2C_SLAVE) 346 /* 347 * If it's requested in the middle of a slave session, set the master 348 * state to 'pending' then H/W will continue handling this master 349 * command when the bus comes back to the idle state. 350 */ 351 if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) { 352 bus->master_state = ASPEED_I2C_MASTER_PENDING; 353 return; 354 } 355 #endif /* CONFIG_I2C_SLAVE */ 356 357 bus->master_state = ASPEED_I2C_MASTER_START; 358 bus->buf_index = 0; 359 360 if (msg->flags & I2C_M_RD) { 361 command |= ASPEED_I2CD_M_RX_CMD; 362 /* Need to let the hardware know to NACK after RX. */ 363 if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN)) 364 command |= ASPEED_I2CD_M_S_RX_CMD_LAST; 365 } 366 367 writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG); 368 writel(command, bus->base + ASPEED_I2C_CMD_REG); 369 } 370 371 /* precondition: bus.lock has been acquired. */ 372 static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus) 373 { 374 bus->master_state = ASPEED_I2C_MASTER_STOP; 375 writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG); 376 } 377 378 /* precondition: bus.lock has been acquired. */ 379 static void aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus) 380 { 381 if (bus->msgs_index + 1 < bus->msgs_count) { 382 bus->msgs_index++; 383 aspeed_i2c_do_start(bus); 384 } else { 385 aspeed_i2c_do_stop(bus); 386 } 387 } 388 389 static int aspeed_i2c_is_irq_error(u32 irq_status) 390 { 391 if (irq_status & ASPEED_I2CD_INTR_ARBIT_LOSS) 392 return -EAGAIN; 393 if (irq_status & (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | 394 ASPEED_I2CD_INTR_SCL_TIMEOUT)) 395 return -EBUSY; 396 if (irq_status & (ASPEED_I2CD_INTR_ABNORMAL)) 397 return -EPROTO; 398 399 return 0; 400 } 401 402 static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) 403 { 404 u32 irq_handled = 0, command = 0; 405 struct i2c_msg *msg; 406 u8 recv_byte; 407 int ret; 408 409 if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) { 410 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 411 irq_handled |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE; 412 goto out_complete; 413 } 414 415 /* 416 * We encountered an interrupt that reports an error: the hardware 417 * should clear the command queue effectively taking us back to the 418 * INACTIVE state. 419 */ 420 ret = aspeed_i2c_is_irq_error(irq_status); 421 if (ret) { 422 dev_dbg(bus->dev, "received error interrupt: 0x%08x\n", 423 irq_status); 424 irq_handled |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS); 425 if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) { 426 bus->cmd_err = ret; 427 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 428 goto out_complete; 429 } 430 } 431 432 /* Master is not currently active, irq was for someone else. */ 433 if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE || 434 bus->master_state == ASPEED_I2C_MASTER_PENDING) 435 goto out_no_complete; 436 437 /* We are in an invalid state; reset bus to a known state. */ 438 if (!bus->msgs) { 439 dev_err(bus->dev, "bus in unknown state. irq_status: 0x%x\n", 440 irq_status); 441 bus->cmd_err = -EIO; 442 if (bus->master_state != ASPEED_I2C_MASTER_STOP && 443 bus->master_state != ASPEED_I2C_MASTER_INACTIVE) 444 aspeed_i2c_do_stop(bus); 445 goto out_no_complete; 446 } 447 msg = &bus->msgs[bus->msgs_index]; 448 449 /* 450 * START is a special case because we still have to handle a subsequent 451 * TX or RX immediately after we handle it, so we handle it here and 452 * then update the state and handle the new state below. 453 */ 454 if (bus->master_state == ASPEED_I2C_MASTER_START) { 455 #if IS_ENABLED(CONFIG_I2C_SLAVE) 456 /* 457 * If a peer master starts a xfer immediately after it queues a 458 * master command, clear the queued master command and change 459 * its state to 'pending'. To simplify handling of pending 460 * cases, it uses S/W solution instead of H/W command queue 461 * handling. 462 */ 463 if (unlikely(irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH)) { 464 writel(readl(bus->base + ASPEED_I2C_CMD_REG) & 465 ~ASPEED_I2CD_MASTER_CMDS_MASK, 466 bus->base + ASPEED_I2C_CMD_REG); 467 bus->master_state = ASPEED_I2C_MASTER_PENDING; 468 dev_dbg(bus->dev, 469 "master goes pending due to a slave start\n"); 470 goto out_no_complete; 471 } 472 #endif /* CONFIG_I2C_SLAVE */ 473 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { 474 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_NAK))) { 475 bus->cmd_err = -ENXIO; 476 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 477 goto out_complete; 478 } 479 pr_devel("no slave present at %02x\n", msg->addr); 480 irq_handled |= ASPEED_I2CD_INTR_TX_NAK; 481 bus->cmd_err = -ENXIO; 482 aspeed_i2c_do_stop(bus); 483 goto out_no_complete; 484 } 485 irq_handled |= ASPEED_I2CD_INTR_TX_ACK; 486 if (msg->len == 0) { /* SMBUS_QUICK */ 487 aspeed_i2c_do_stop(bus); 488 goto out_no_complete; 489 } 490 if (msg->flags & I2C_M_RD) 491 bus->master_state = ASPEED_I2C_MASTER_RX_FIRST; 492 else 493 bus->master_state = ASPEED_I2C_MASTER_TX_FIRST; 494 } 495 496 switch (bus->master_state) { 497 case ASPEED_I2C_MASTER_TX: 498 if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) { 499 dev_dbg(bus->dev, "slave NACKed TX\n"); 500 irq_handled |= ASPEED_I2CD_INTR_TX_NAK; 501 goto error_and_stop; 502 } else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { 503 dev_err(bus->dev, "slave failed to ACK TX\n"); 504 goto error_and_stop; 505 } 506 irq_handled |= ASPEED_I2CD_INTR_TX_ACK; 507 /* fall through */ 508 case ASPEED_I2C_MASTER_TX_FIRST: 509 if (bus->buf_index < msg->len) { 510 bus->master_state = ASPEED_I2C_MASTER_TX; 511 writel(msg->buf[bus->buf_index++], 512 bus->base + ASPEED_I2C_BYTE_BUF_REG); 513 writel(ASPEED_I2CD_M_TX_CMD, 514 bus->base + ASPEED_I2C_CMD_REG); 515 } else { 516 aspeed_i2c_next_msg_or_stop(bus); 517 } 518 goto out_no_complete; 519 case ASPEED_I2C_MASTER_RX_FIRST: 520 /* RX may not have completed yet (only address cycle) */ 521 if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE)) 522 goto out_no_complete; 523 /* fall through */ 524 case ASPEED_I2C_MASTER_RX: 525 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) { 526 dev_err(bus->dev, "master failed to RX\n"); 527 goto error_and_stop; 528 } 529 irq_handled |= ASPEED_I2CD_INTR_RX_DONE; 530 531 recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8; 532 msg->buf[bus->buf_index++] = recv_byte; 533 534 if (msg->flags & I2C_M_RECV_LEN) { 535 if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) { 536 bus->cmd_err = -EPROTO; 537 aspeed_i2c_do_stop(bus); 538 goto out_no_complete; 539 } 540 msg->len = recv_byte + 541 ((msg->flags & I2C_CLIENT_PEC) ? 2 : 1); 542 msg->flags &= ~I2C_M_RECV_LEN; 543 } 544 545 if (bus->buf_index < msg->len) { 546 bus->master_state = ASPEED_I2C_MASTER_RX; 547 command = ASPEED_I2CD_M_RX_CMD; 548 if (bus->buf_index + 1 == msg->len) 549 command |= ASPEED_I2CD_M_S_RX_CMD_LAST; 550 writel(command, bus->base + ASPEED_I2C_CMD_REG); 551 } else { 552 aspeed_i2c_next_msg_or_stop(bus); 553 } 554 goto out_no_complete; 555 case ASPEED_I2C_MASTER_STOP: 556 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) { 557 dev_err(bus->dev, 558 "master failed to STOP. irq_status:0x%x\n", 559 irq_status); 560 bus->cmd_err = -EIO; 561 /* Do not STOP as we have already tried. */ 562 } else { 563 irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP; 564 } 565 566 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 567 goto out_complete; 568 case ASPEED_I2C_MASTER_INACTIVE: 569 dev_err(bus->dev, 570 "master received interrupt 0x%08x, but is inactive\n", 571 irq_status); 572 bus->cmd_err = -EIO; 573 /* Do not STOP as we should be inactive. */ 574 goto out_complete; 575 default: 576 WARN(1, "unknown master state\n"); 577 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 578 bus->cmd_err = -EINVAL; 579 goto out_complete; 580 } 581 error_and_stop: 582 bus->cmd_err = -EIO; 583 aspeed_i2c_do_stop(bus); 584 goto out_no_complete; 585 out_complete: 586 bus->msgs = NULL; 587 if (bus->cmd_err) 588 bus->master_xfer_result = bus->cmd_err; 589 else 590 bus->master_xfer_result = bus->msgs_index + 1; 591 complete(&bus->cmd_complete); 592 out_no_complete: 593 return irq_handled; 594 } 595 596 static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id) 597 { 598 struct aspeed_i2c_bus *bus = dev_id; 599 u32 irq_received, irq_remaining, irq_handled; 600 601 spin_lock(&bus->lock); 602 irq_received = readl(bus->base + ASPEED_I2C_INTR_STS_REG); 603 /* Ack all interrupts except for Rx done */ 604 writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE, 605 bus->base + ASPEED_I2C_INTR_STS_REG); 606 readl(bus->base + ASPEED_I2C_INTR_STS_REG); 607 irq_remaining = irq_received; 608 609 #if IS_ENABLED(CONFIG_I2C_SLAVE) 610 /* 611 * In most cases, interrupt bits will be set one by one, although 612 * multiple interrupt bits could be set at the same time. It's also 613 * possible that master interrupt bits could be set along with slave 614 * interrupt bits. Each case needs to be handled using corresponding 615 * handlers depending on the current state. 616 */ 617 if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE && 618 bus->master_state != ASPEED_I2C_MASTER_PENDING) { 619 irq_handled = aspeed_i2c_master_irq(bus, irq_remaining); 620 irq_remaining &= ~irq_handled; 621 if (irq_remaining) 622 irq_handled |= aspeed_i2c_slave_irq(bus, irq_remaining); 623 } else { 624 irq_handled = aspeed_i2c_slave_irq(bus, irq_remaining); 625 irq_remaining &= ~irq_handled; 626 if (irq_remaining) 627 irq_handled |= aspeed_i2c_master_irq(bus, 628 irq_remaining); 629 } 630 631 /* 632 * Start a pending master command at here if a slave operation is 633 * completed. 634 */ 635 if (bus->master_state == ASPEED_I2C_MASTER_PENDING && 636 bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE) 637 aspeed_i2c_do_start(bus); 638 #else 639 irq_handled = aspeed_i2c_master_irq(bus, irq_remaining); 640 #endif /* CONFIG_I2C_SLAVE */ 641 642 irq_remaining &= ~irq_handled; 643 if (irq_remaining) 644 dev_err(bus->dev, 645 "irq handled != irq. expected 0x%08x, but was 0x%08x\n", 646 irq_received, irq_handled); 647 648 /* Ack Rx done */ 649 if (irq_received & ASPEED_I2CD_INTR_RX_DONE) { 650 writel(ASPEED_I2CD_INTR_RX_DONE, 651 bus->base + ASPEED_I2C_INTR_STS_REG); 652 readl(bus->base + ASPEED_I2C_INTR_STS_REG); 653 } 654 spin_unlock(&bus->lock); 655 return irq_remaining ? IRQ_NONE : IRQ_HANDLED; 656 } 657 658 static int aspeed_i2c_master_xfer(struct i2c_adapter *adap, 659 struct i2c_msg *msgs, int num) 660 { 661 struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap); 662 unsigned long time_left, flags; 663 664 spin_lock_irqsave(&bus->lock, flags); 665 bus->cmd_err = 0; 666 667 /* If bus is busy in a single master environment, attempt recovery. */ 668 if (!bus->multi_master && 669 (readl(bus->base + ASPEED_I2C_CMD_REG) & 670 ASPEED_I2CD_BUS_BUSY_STS)) { 671 int ret; 672 673 spin_unlock_irqrestore(&bus->lock, flags); 674 ret = aspeed_i2c_recover_bus(bus); 675 if (ret) 676 return ret; 677 spin_lock_irqsave(&bus->lock, flags); 678 } 679 680 bus->cmd_err = 0; 681 bus->msgs = msgs; 682 bus->msgs_index = 0; 683 bus->msgs_count = num; 684 685 reinit_completion(&bus->cmd_complete); 686 aspeed_i2c_do_start(bus); 687 spin_unlock_irqrestore(&bus->lock, flags); 688 689 time_left = wait_for_completion_timeout(&bus->cmd_complete, 690 bus->adap.timeout); 691 692 if (time_left == 0) { 693 /* 694 * If timed out and bus is still busy in a multi master 695 * environment, attempt recovery at here. 696 */ 697 if (bus->multi_master && 698 (readl(bus->base + ASPEED_I2C_CMD_REG) & 699 ASPEED_I2CD_BUS_BUSY_STS)) 700 aspeed_i2c_recover_bus(bus); 701 702 /* 703 * If timed out and the state is still pending, drop the pending 704 * master command. 705 */ 706 spin_lock_irqsave(&bus->lock, flags); 707 if (bus->master_state == ASPEED_I2C_MASTER_PENDING) 708 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 709 spin_unlock_irqrestore(&bus->lock, flags); 710 711 return -ETIMEDOUT; 712 } 713 714 return bus->master_xfer_result; 715 } 716 717 static u32 aspeed_i2c_functionality(struct i2c_adapter *adap) 718 { 719 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA; 720 } 721 722 #if IS_ENABLED(CONFIG_I2C_SLAVE) 723 /* precondition: bus.lock has been acquired. */ 724 static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr) 725 { 726 u32 addr_reg_val, func_ctrl_reg_val; 727 728 /* Set slave addr. */ 729 addr_reg_val = readl(bus->base + ASPEED_I2C_DEV_ADDR_REG); 730 addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK; 731 addr_reg_val |= slave_addr & ASPEED_I2CD_DEV_ADDR_MASK; 732 writel(addr_reg_val, bus->base + ASPEED_I2C_DEV_ADDR_REG); 733 734 /* Turn on slave mode. */ 735 func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG); 736 func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN; 737 writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG); 738 } 739 740 static int aspeed_i2c_reg_slave(struct i2c_client *client) 741 { 742 struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter); 743 unsigned long flags; 744 745 spin_lock_irqsave(&bus->lock, flags); 746 if (bus->slave) { 747 spin_unlock_irqrestore(&bus->lock, flags); 748 return -EINVAL; 749 } 750 751 __aspeed_i2c_reg_slave(bus, client->addr); 752 753 bus->slave = client; 754 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; 755 spin_unlock_irqrestore(&bus->lock, flags); 756 757 return 0; 758 } 759 760 static int aspeed_i2c_unreg_slave(struct i2c_client *client) 761 { 762 struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter); 763 u32 func_ctrl_reg_val; 764 unsigned long flags; 765 766 spin_lock_irqsave(&bus->lock, flags); 767 if (!bus->slave) { 768 spin_unlock_irqrestore(&bus->lock, flags); 769 return -EINVAL; 770 } 771 772 /* Turn off slave mode. */ 773 func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG); 774 func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN; 775 writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG); 776 777 bus->slave = NULL; 778 spin_unlock_irqrestore(&bus->lock, flags); 779 780 return 0; 781 } 782 #endif /* CONFIG_I2C_SLAVE */ 783 784 static const struct i2c_algorithm aspeed_i2c_algo = { 785 .master_xfer = aspeed_i2c_master_xfer, 786 .functionality = aspeed_i2c_functionality, 787 #if IS_ENABLED(CONFIG_I2C_SLAVE) 788 .reg_slave = aspeed_i2c_reg_slave, 789 .unreg_slave = aspeed_i2c_unreg_slave, 790 #endif /* CONFIG_I2C_SLAVE */ 791 }; 792 793 static u32 aspeed_i2c_get_clk_reg_val(struct device *dev, 794 u32 clk_high_low_mask, 795 u32 divisor) 796 { 797 u32 base_clk_divisor, clk_high_low_max, clk_high, clk_low, tmp; 798 799 /* 800 * SCL_high and SCL_low represent a value 1 greater than what is stored 801 * since a zero divider is meaningless. Thus, the max value each can 802 * store is every bit set + 1. Since SCL_high and SCL_low are added 803 * together (see below), the max value of both is the max value of one 804 * them times two. 805 */ 806 clk_high_low_max = (clk_high_low_mask + 1) * 2; 807 808 /* 809 * The actual clock frequency of SCL is: 810 * SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low)) 811 * = APB_freq / divisor 812 * where base_freq is a programmable clock divider; its value is 813 * base_freq = 1 << base_clk_divisor 814 * SCL_high is the number of base_freq clock cycles that SCL stays high 815 * and SCL_low is the number of base_freq clock cycles that SCL stays 816 * low for a period of SCL. 817 * The actual register has a minimum SCL_high and SCL_low minimum of 1; 818 * thus, they start counting at zero. So 819 * SCL_high = clk_high + 1 820 * SCL_low = clk_low + 1 821 * Thus, 822 * SCL_freq = APB_freq / 823 * ((1 << base_clk_divisor) * (clk_high + 1 + clk_low + 1)) 824 * The documentation recommends clk_high >= clk_high_max / 2 and 825 * clk_low >= clk_low_max / 2 - 1 when possible; this last constraint 826 * gives us the following solution: 827 */ 828 base_clk_divisor = divisor > clk_high_low_max ? 829 ilog2((divisor - 1) / clk_high_low_max) + 1 : 0; 830 831 if (base_clk_divisor > ASPEED_I2CD_TIME_BASE_DIVISOR_MASK) { 832 base_clk_divisor = ASPEED_I2CD_TIME_BASE_DIVISOR_MASK; 833 clk_low = clk_high_low_mask; 834 clk_high = clk_high_low_mask; 835 dev_err(dev, 836 "clamping clock divider: divider requested, %u, is greater than largest possible divider, %u.\n", 837 divisor, (1 << base_clk_divisor) * clk_high_low_max); 838 } else { 839 tmp = (divisor + (1 << base_clk_divisor) - 1) 840 >> base_clk_divisor; 841 clk_low = tmp / 2; 842 clk_high = tmp - clk_low; 843 844 if (clk_high) 845 clk_high--; 846 847 if (clk_low) 848 clk_low--; 849 } 850 851 852 return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT) 853 & ASPEED_I2CD_TIME_SCL_HIGH_MASK) 854 | ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT) 855 & ASPEED_I2CD_TIME_SCL_LOW_MASK) 856 | (base_clk_divisor 857 & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK); 858 } 859 860 static u32 aspeed_i2c_24xx_get_clk_reg_val(struct device *dev, u32 divisor) 861 { 862 /* 863 * clk_high and clk_low are each 3 bits wide, so each can hold a max 864 * value of 8 giving a clk_high_low_max of 16. 865 */ 866 return aspeed_i2c_get_clk_reg_val(dev, GENMASK(2, 0), divisor); 867 } 868 869 static u32 aspeed_i2c_25xx_get_clk_reg_val(struct device *dev, u32 divisor) 870 { 871 /* 872 * clk_high and clk_low are each 4 bits wide, so each can hold a max 873 * value of 16 giving a clk_high_low_max of 32. 874 */ 875 return aspeed_i2c_get_clk_reg_val(dev, GENMASK(3, 0), divisor); 876 } 877 878 /* precondition: bus.lock has been acquired. */ 879 static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus) 880 { 881 u32 divisor, clk_reg_val; 882 883 divisor = DIV_ROUND_UP(bus->parent_clk_frequency, bus->bus_frequency); 884 clk_reg_val = readl(bus->base + ASPEED_I2C_AC_TIMING_REG1); 885 clk_reg_val &= (ASPEED_I2CD_TIME_TBUF_MASK | 886 ASPEED_I2CD_TIME_THDSTA_MASK | 887 ASPEED_I2CD_TIME_TACST_MASK); 888 clk_reg_val |= bus->get_clk_reg_val(bus->dev, divisor); 889 writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1); 890 writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2); 891 892 return 0; 893 } 894 895 /* precondition: bus.lock has been acquired. */ 896 static int aspeed_i2c_init(struct aspeed_i2c_bus *bus, 897 struct platform_device *pdev) 898 { 899 u32 fun_ctrl_reg = ASPEED_I2CD_MASTER_EN; 900 int ret; 901 902 /* Disable everything. */ 903 writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG); 904 905 ret = aspeed_i2c_init_clk(bus); 906 if (ret < 0) 907 return ret; 908 909 if (of_property_read_bool(pdev->dev.of_node, "multi-master")) 910 bus->multi_master = true; 911 else 912 fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS; 913 914 /* Enable Master Mode */ 915 writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg, 916 bus->base + ASPEED_I2C_FUN_CTRL_REG); 917 918 #if IS_ENABLED(CONFIG_I2C_SLAVE) 919 /* If slave has already been registered, re-enable it. */ 920 if (bus->slave) 921 __aspeed_i2c_reg_slave(bus, bus->slave->addr); 922 #endif /* CONFIG_I2C_SLAVE */ 923 924 /* Set interrupt generation of I2C controller */ 925 writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG); 926 927 return 0; 928 } 929 930 static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus) 931 { 932 struct platform_device *pdev = to_platform_device(bus->dev); 933 unsigned long flags; 934 int ret; 935 936 spin_lock_irqsave(&bus->lock, flags); 937 938 /* Disable and ack all interrupts. */ 939 writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); 940 writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG); 941 942 ret = aspeed_i2c_init(bus, pdev); 943 944 spin_unlock_irqrestore(&bus->lock, flags); 945 946 return ret; 947 } 948 949 static const struct of_device_id aspeed_i2c_bus_of_table[] = { 950 { 951 .compatible = "aspeed,ast2400-i2c-bus", 952 .data = aspeed_i2c_24xx_get_clk_reg_val, 953 }, 954 { 955 .compatible = "aspeed,ast2500-i2c-bus", 956 .data = aspeed_i2c_25xx_get_clk_reg_val, 957 }, 958 { 959 .compatible = "aspeed,ast2600-i2c-bus", 960 .data = aspeed_i2c_25xx_get_clk_reg_val, 961 }, 962 { }, 963 }; 964 MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table); 965 966 static int aspeed_i2c_probe_bus(struct platform_device *pdev) 967 { 968 const struct of_device_id *match; 969 struct aspeed_i2c_bus *bus; 970 struct clk *parent_clk; 971 struct resource *res; 972 int irq, ret; 973 974 bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); 975 if (!bus) 976 return -ENOMEM; 977 978 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 979 bus->base = devm_ioremap_resource(&pdev->dev, res); 980 if (IS_ERR(bus->base)) 981 return PTR_ERR(bus->base); 982 983 parent_clk = devm_clk_get(&pdev->dev, NULL); 984 if (IS_ERR(parent_clk)) 985 return PTR_ERR(parent_clk); 986 bus->parent_clk_frequency = clk_get_rate(parent_clk); 987 /* We just need the clock rate, we don't actually use the clk object. */ 988 devm_clk_put(&pdev->dev, parent_clk); 989 990 bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL); 991 if (IS_ERR(bus->rst)) { 992 dev_err(&pdev->dev, 993 "missing or invalid reset controller device tree entry\n"); 994 return PTR_ERR(bus->rst); 995 } 996 reset_control_deassert(bus->rst); 997 998 ret = of_property_read_u32(pdev->dev.of_node, 999 "bus-frequency", &bus->bus_frequency); 1000 if (ret < 0) { 1001 dev_err(&pdev->dev, 1002 "Could not read bus-frequency property\n"); 1003 bus->bus_frequency = I2C_MAX_STANDARD_MODE_FREQ; 1004 } 1005 1006 match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node); 1007 if (!match) 1008 bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val; 1009 else 1010 bus->get_clk_reg_val = (u32 (*)(struct device *, u32)) 1011 match->data; 1012 1013 /* Initialize the I2C adapter */ 1014 spin_lock_init(&bus->lock); 1015 init_completion(&bus->cmd_complete); 1016 bus->adap.owner = THIS_MODULE; 1017 bus->adap.retries = 0; 1018 bus->adap.algo = &aspeed_i2c_algo; 1019 bus->adap.dev.parent = &pdev->dev; 1020 bus->adap.dev.of_node = pdev->dev.of_node; 1021 strlcpy(bus->adap.name, pdev->name, sizeof(bus->adap.name)); 1022 i2c_set_adapdata(&bus->adap, bus); 1023 1024 bus->dev = &pdev->dev; 1025 1026 /* Clean up any left over interrupt state. */ 1027 writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); 1028 writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG); 1029 /* 1030 * bus.lock does not need to be held because the interrupt handler has 1031 * not been enabled yet. 1032 */ 1033 ret = aspeed_i2c_init(bus, pdev); 1034 if (ret < 0) 1035 return ret; 1036 1037 irq = irq_of_parse_and_map(pdev->dev.of_node, 0); 1038 ret = devm_request_irq(&pdev->dev, irq, aspeed_i2c_bus_irq, 1039 0, dev_name(&pdev->dev), bus); 1040 if (ret < 0) 1041 return ret; 1042 1043 ret = i2c_add_adapter(&bus->adap); 1044 if (ret < 0) 1045 return ret; 1046 1047 platform_set_drvdata(pdev, bus); 1048 1049 dev_info(bus->dev, "i2c bus %d registered, irq %d\n", 1050 bus->adap.nr, irq); 1051 1052 return 0; 1053 } 1054 1055 static int aspeed_i2c_remove_bus(struct platform_device *pdev) 1056 { 1057 struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev); 1058 unsigned long flags; 1059 1060 spin_lock_irqsave(&bus->lock, flags); 1061 1062 /* Disable everything. */ 1063 writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG); 1064 writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); 1065 1066 spin_unlock_irqrestore(&bus->lock, flags); 1067 1068 reset_control_assert(bus->rst); 1069 1070 i2c_del_adapter(&bus->adap); 1071 1072 return 0; 1073 } 1074 1075 static struct platform_driver aspeed_i2c_bus_driver = { 1076 .probe = aspeed_i2c_probe_bus, 1077 .remove = aspeed_i2c_remove_bus, 1078 .driver = { 1079 .name = "aspeed-i2c-bus", 1080 .of_match_table = aspeed_i2c_bus_of_table, 1081 }, 1082 }; 1083 module_platform_driver(aspeed_i2c_bus_driver); 1084 1085 MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>"); 1086 MODULE_DESCRIPTION("Aspeed I2C Bus Driver"); 1087 MODULE_LICENSE("GPL v2"); 1088