1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Aspeed 24XX/25XX I2C Controller. 4 * 5 * Copyright (C) 2012-2017 ASPEED Technology Inc. 6 * Copyright 2017 IBM Corporation 7 * Copyright 2017 Google, Inc. 8 */ 9 10 #include <linux/clk.h> 11 #include <linux/completion.h> 12 #include <linux/err.h> 13 #include <linux/errno.h> 14 #include <linux/i2c.h> 15 #include <linux/init.h> 16 #include <linux/interrupt.h> 17 #include <linux/io.h> 18 #include <linux/irq.h> 19 #include <linux/kernel.h> 20 #include <linux/module.h> 21 #include <linux/of_address.h> 22 #include <linux/of_irq.h> 23 #include <linux/of_platform.h> 24 #include <linux/platform_device.h> 25 #include <linux/reset.h> 26 #include <linux/slab.h> 27 28 /* I2C Register */ 29 #define ASPEED_I2C_FUN_CTRL_REG 0x00 30 #define ASPEED_I2C_AC_TIMING_REG1 0x04 31 #define ASPEED_I2C_AC_TIMING_REG2 0x08 32 #define ASPEED_I2C_INTR_CTRL_REG 0x0c 33 #define ASPEED_I2C_INTR_STS_REG 0x10 34 #define ASPEED_I2C_CMD_REG 0x14 35 #define ASPEED_I2C_DEV_ADDR_REG 0x18 36 #define ASPEED_I2C_BYTE_BUF_REG 0x20 37 38 /* Global Register Definition */ 39 /* 0x00 : I2C Interrupt Status Register */ 40 /* 0x08 : I2C Interrupt Target Assignment */ 41 42 /* Device Register Definition */ 43 /* 0x00 : I2CD Function Control Register */ 44 #define ASPEED_I2CD_MULTI_MASTER_DIS BIT(15) 45 #define ASPEED_I2CD_SDA_DRIVE_1T_EN BIT(8) 46 #define ASPEED_I2CD_M_SDA_DRIVE_1T_EN BIT(7) 47 #define ASPEED_I2CD_M_HIGH_SPEED_EN BIT(6) 48 #define ASPEED_I2CD_SLAVE_EN BIT(1) 49 #define ASPEED_I2CD_MASTER_EN BIT(0) 50 51 /* 0x04 : I2CD Clock and AC Timing Control Register #1 */ 52 #define ASPEED_I2CD_TIME_TBUF_MASK GENMASK(31, 28) 53 #define ASPEED_I2CD_TIME_THDSTA_MASK GENMASK(27, 24) 54 #define ASPEED_I2CD_TIME_TACST_MASK GENMASK(23, 20) 55 #define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT 16 56 #define ASPEED_I2CD_TIME_SCL_HIGH_MASK GENMASK(19, 16) 57 #define ASPEED_I2CD_TIME_SCL_LOW_SHIFT 12 58 #define ASPEED_I2CD_TIME_SCL_LOW_MASK GENMASK(15, 12) 59 #define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK GENMASK(3, 0) 60 #define ASPEED_I2CD_TIME_SCL_REG_MAX GENMASK(3, 0) 61 /* 0x08 : I2CD Clock and AC Timing Control Register #2 */ 62 #define ASPEED_NO_TIMEOUT_CTRL 0 63 64 /* 0x0c : I2CD Interrupt Control Register & 65 * 0x10 : I2CD Interrupt Status Register 66 * 67 * These share bit definitions, so use the same values for the enable & 68 * status bits. 69 */ 70 #define ASPEED_I2CD_INTR_RECV_MASK 0xf000ffff 71 #define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14) 72 #define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13) 73 #define ASPEED_I2CD_INTR_SLAVE_MATCH BIT(7) 74 #define ASPEED_I2CD_INTR_SCL_TIMEOUT BIT(6) 75 #define ASPEED_I2CD_INTR_ABNORMAL BIT(5) 76 #define ASPEED_I2CD_INTR_NORMAL_STOP BIT(4) 77 #define ASPEED_I2CD_INTR_ARBIT_LOSS BIT(3) 78 #define ASPEED_I2CD_INTR_RX_DONE BIT(2) 79 #define ASPEED_I2CD_INTR_TX_NAK BIT(1) 80 #define ASPEED_I2CD_INTR_TX_ACK BIT(0) 81 #define ASPEED_I2CD_INTR_MASTER_ERRORS \ 82 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \ 83 ASPEED_I2CD_INTR_SCL_TIMEOUT | \ 84 ASPEED_I2CD_INTR_ABNORMAL | \ 85 ASPEED_I2CD_INTR_ARBIT_LOSS) 86 #define ASPEED_I2CD_INTR_ALL \ 87 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \ 88 ASPEED_I2CD_INTR_BUS_RECOVER_DONE | \ 89 ASPEED_I2CD_INTR_SCL_TIMEOUT | \ 90 ASPEED_I2CD_INTR_ABNORMAL | \ 91 ASPEED_I2CD_INTR_NORMAL_STOP | \ 92 ASPEED_I2CD_INTR_ARBIT_LOSS | \ 93 ASPEED_I2CD_INTR_RX_DONE | \ 94 ASPEED_I2CD_INTR_TX_NAK | \ 95 ASPEED_I2CD_INTR_TX_ACK) 96 97 /* 0x14 : I2CD Command/Status Register */ 98 #define ASPEED_I2CD_SCL_LINE_STS BIT(18) 99 #define ASPEED_I2CD_SDA_LINE_STS BIT(17) 100 #define ASPEED_I2CD_BUS_BUSY_STS BIT(16) 101 #define ASPEED_I2CD_BUS_RECOVER_CMD BIT(11) 102 103 /* Command Bit */ 104 #define ASPEED_I2CD_M_STOP_CMD BIT(5) 105 #define ASPEED_I2CD_M_S_RX_CMD_LAST BIT(4) 106 #define ASPEED_I2CD_M_RX_CMD BIT(3) 107 #define ASPEED_I2CD_S_TX_CMD BIT(2) 108 #define ASPEED_I2CD_M_TX_CMD BIT(1) 109 #define ASPEED_I2CD_M_START_CMD BIT(0) 110 #define ASPEED_I2CD_MASTER_CMDS_MASK \ 111 (ASPEED_I2CD_M_STOP_CMD | \ 112 ASPEED_I2CD_M_S_RX_CMD_LAST | \ 113 ASPEED_I2CD_M_RX_CMD | \ 114 ASPEED_I2CD_M_TX_CMD | \ 115 ASPEED_I2CD_M_START_CMD) 116 117 /* 0x18 : I2CD Slave Device Address Register */ 118 #define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0) 119 120 enum aspeed_i2c_master_state { 121 ASPEED_I2C_MASTER_INACTIVE, 122 ASPEED_I2C_MASTER_PENDING, 123 ASPEED_I2C_MASTER_START, 124 ASPEED_I2C_MASTER_TX_FIRST, 125 ASPEED_I2C_MASTER_TX, 126 ASPEED_I2C_MASTER_RX_FIRST, 127 ASPEED_I2C_MASTER_RX, 128 ASPEED_I2C_MASTER_STOP, 129 }; 130 131 enum aspeed_i2c_slave_state { 132 ASPEED_I2C_SLAVE_INACTIVE, 133 ASPEED_I2C_SLAVE_START, 134 ASPEED_I2C_SLAVE_READ_REQUESTED, 135 ASPEED_I2C_SLAVE_READ_PROCESSED, 136 ASPEED_I2C_SLAVE_WRITE_REQUESTED, 137 ASPEED_I2C_SLAVE_WRITE_RECEIVED, 138 ASPEED_I2C_SLAVE_STOP, 139 }; 140 141 struct aspeed_i2c_bus { 142 struct i2c_adapter adap; 143 struct device *dev; 144 void __iomem *base; 145 struct reset_control *rst; 146 /* Synchronizes I/O mem access to base. */ 147 spinlock_t lock; 148 struct completion cmd_complete; 149 u32 (*get_clk_reg_val)(struct device *dev, 150 u32 divisor); 151 unsigned long parent_clk_frequency; 152 u32 bus_frequency; 153 /* Transaction state. */ 154 enum aspeed_i2c_master_state master_state; 155 struct i2c_msg *msgs; 156 size_t buf_index; 157 size_t msgs_index; 158 size_t msgs_count; 159 bool send_stop; 160 int cmd_err; 161 /* Protected only by i2c_lock_bus */ 162 int master_xfer_result; 163 /* Multi-master */ 164 bool multi_master; 165 #if IS_ENABLED(CONFIG_I2C_SLAVE) 166 struct i2c_client *slave; 167 enum aspeed_i2c_slave_state slave_state; 168 #endif /* CONFIG_I2C_SLAVE */ 169 }; 170 171 static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus); 172 173 static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus) 174 { 175 unsigned long time_left, flags; 176 int ret = 0; 177 u32 command; 178 179 spin_lock_irqsave(&bus->lock, flags); 180 command = readl(bus->base + ASPEED_I2C_CMD_REG); 181 182 if (command & ASPEED_I2CD_SDA_LINE_STS) { 183 /* Bus is idle: no recovery needed. */ 184 if (command & ASPEED_I2CD_SCL_LINE_STS) 185 goto out; 186 dev_dbg(bus->dev, "SCL hung (state %x), attempting recovery\n", 187 command); 188 189 reinit_completion(&bus->cmd_complete); 190 writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG); 191 spin_unlock_irqrestore(&bus->lock, flags); 192 193 time_left = wait_for_completion_timeout( 194 &bus->cmd_complete, bus->adap.timeout); 195 196 spin_lock_irqsave(&bus->lock, flags); 197 if (time_left == 0) 198 goto reset_out; 199 else if (bus->cmd_err) 200 goto reset_out; 201 /* Recovery failed. */ 202 else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) & 203 ASPEED_I2CD_SCL_LINE_STS)) 204 goto reset_out; 205 /* Bus error. */ 206 } else { 207 dev_dbg(bus->dev, "SDA hung (state %x), attempting recovery\n", 208 command); 209 210 reinit_completion(&bus->cmd_complete); 211 /* Writes 1 to 8 SCL clock cycles until SDA is released. */ 212 writel(ASPEED_I2CD_BUS_RECOVER_CMD, 213 bus->base + ASPEED_I2C_CMD_REG); 214 spin_unlock_irqrestore(&bus->lock, flags); 215 216 time_left = wait_for_completion_timeout( 217 &bus->cmd_complete, bus->adap.timeout); 218 219 spin_lock_irqsave(&bus->lock, flags); 220 if (time_left == 0) 221 goto reset_out; 222 else if (bus->cmd_err) 223 goto reset_out; 224 /* Recovery failed. */ 225 else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) & 226 ASPEED_I2CD_SDA_LINE_STS)) 227 goto reset_out; 228 } 229 230 out: 231 spin_unlock_irqrestore(&bus->lock, flags); 232 233 return ret; 234 235 reset_out: 236 spin_unlock_irqrestore(&bus->lock, flags); 237 238 return aspeed_i2c_reset(bus); 239 } 240 241 #if IS_ENABLED(CONFIG_I2C_SLAVE) 242 static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status) 243 { 244 u32 command, irq_handled = 0; 245 struct i2c_client *slave = bus->slave; 246 u8 value; 247 248 if (!slave) 249 return 0; 250 251 command = readl(bus->base + ASPEED_I2C_CMD_REG); 252 253 /* Slave was requested, restart state machine. */ 254 if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) { 255 irq_handled |= ASPEED_I2CD_INTR_SLAVE_MATCH; 256 bus->slave_state = ASPEED_I2C_SLAVE_START; 257 } 258 259 /* Slave is not currently active, irq was for someone else. */ 260 if (bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE) 261 return irq_handled; 262 263 dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n", 264 irq_status, command); 265 266 /* Slave was sent something. */ 267 if (irq_status & ASPEED_I2CD_INTR_RX_DONE) { 268 value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8; 269 /* Handle address frame. */ 270 if (bus->slave_state == ASPEED_I2C_SLAVE_START) { 271 if (value & 0x1) 272 bus->slave_state = 273 ASPEED_I2C_SLAVE_READ_REQUESTED; 274 else 275 bus->slave_state = 276 ASPEED_I2C_SLAVE_WRITE_REQUESTED; 277 } 278 irq_handled |= ASPEED_I2CD_INTR_RX_DONE; 279 } 280 281 /* Slave was asked to stop. */ 282 if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) { 283 irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP; 284 bus->slave_state = ASPEED_I2C_SLAVE_STOP; 285 } 286 if (irq_status & ASPEED_I2CD_INTR_TX_NAK && 287 bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) { 288 irq_handled |= ASPEED_I2CD_INTR_TX_NAK; 289 bus->slave_state = ASPEED_I2C_SLAVE_STOP; 290 } 291 292 switch (bus->slave_state) { 293 case ASPEED_I2C_SLAVE_READ_REQUESTED: 294 if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_ACK)) 295 dev_err(bus->dev, "Unexpected ACK on read request.\n"); 296 bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED; 297 i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value); 298 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG); 299 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG); 300 break; 301 case ASPEED_I2C_SLAVE_READ_PROCESSED: 302 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { 303 dev_err(bus->dev, 304 "Expected ACK after processed read.\n"); 305 break; 306 } 307 irq_handled |= ASPEED_I2CD_INTR_TX_ACK; 308 i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value); 309 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG); 310 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG); 311 break; 312 case ASPEED_I2C_SLAVE_WRITE_REQUESTED: 313 bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED; 314 i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); 315 break; 316 case ASPEED_I2C_SLAVE_WRITE_RECEIVED: 317 i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value); 318 break; 319 case ASPEED_I2C_SLAVE_STOP: 320 i2c_slave_event(slave, I2C_SLAVE_STOP, &value); 321 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; 322 break; 323 case ASPEED_I2C_SLAVE_START: 324 /* Slave was just started. Waiting for the next event. */; 325 break; 326 default: 327 dev_err(bus->dev, "unknown slave_state: %d\n", 328 bus->slave_state); 329 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; 330 break; 331 } 332 333 return irq_handled; 334 } 335 #endif /* CONFIG_I2C_SLAVE */ 336 337 /* precondition: bus.lock has been acquired. */ 338 static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus) 339 { 340 u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD; 341 struct i2c_msg *msg = &bus->msgs[bus->msgs_index]; 342 u8 slave_addr = i2c_8bit_addr_from_msg(msg); 343 344 #if IS_ENABLED(CONFIG_I2C_SLAVE) 345 /* 346 * If it's requested in the middle of a slave session, set the master 347 * state to 'pending' then H/W will continue handling this master 348 * command when the bus comes back to the idle state. 349 */ 350 if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) { 351 bus->master_state = ASPEED_I2C_MASTER_PENDING; 352 return; 353 } 354 #endif /* CONFIG_I2C_SLAVE */ 355 356 bus->master_state = ASPEED_I2C_MASTER_START; 357 bus->buf_index = 0; 358 359 if (msg->flags & I2C_M_RD) { 360 command |= ASPEED_I2CD_M_RX_CMD; 361 /* Need to let the hardware know to NACK after RX. */ 362 if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN)) 363 command |= ASPEED_I2CD_M_S_RX_CMD_LAST; 364 } 365 366 writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG); 367 writel(command, bus->base + ASPEED_I2C_CMD_REG); 368 } 369 370 /* precondition: bus.lock has been acquired. */ 371 static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus) 372 { 373 bus->master_state = ASPEED_I2C_MASTER_STOP; 374 writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG); 375 } 376 377 /* precondition: bus.lock has been acquired. */ 378 static void aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus) 379 { 380 if (bus->msgs_index + 1 < bus->msgs_count) { 381 bus->msgs_index++; 382 aspeed_i2c_do_start(bus); 383 } else { 384 aspeed_i2c_do_stop(bus); 385 } 386 } 387 388 static int aspeed_i2c_is_irq_error(u32 irq_status) 389 { 390 if (irq_status & ASPEED_I2CD_INTR_ARBIT_LOSS) 391 return -EAGAIN; 392 if (irq_status & (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | 393 ASPEED_I2CD_INTR_SCL_TIMEOUT)) 394 return -EBUSY; 395 if (irq_status & (ASPEED_I2CD_INTR_ABNORMAL)) 396 return -EPROTO; 397 398 return 0; 399 } 400 401 static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) 402 { 403 u32 irq_handled = 0, command = 0; 404 struct i2c_msg *msg; 405 u8 recv_byte; 406 int ret; 407 408 if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) { 409 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 410 irq_handled |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE; 411 goto out_complete; 412 } 413 414 /* 415 * We encountered an interrupt that reports an error: the hardware 416 * should clear the command queue effectively taking us back to the 417 * INACTIVE state. 418 */ 419 ret = aspeed_i2c_is_irq_error(irq_status); 420 if (ret) { 421 dev_dbg(bus->dev, "received error interrupt: 0x%08x\n", 422 irq_status); 423 irq_handled |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS); 424 if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) { 425 bus->cmd_err = ret; 426 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 427 goto out_complete; 428 } 429 } 430 431 /* Master is not currently active, irq was for someone else. */ 432 if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE || 433 bus->master_state == ASPEED_I2C_MASTER_PENDING) 434 goto out_no_complete; 435 436 /* We are in an invalid state; reset bus to a known state. */ 437 if (!bus->msgs) { 438 dev_err(bus->dev, "bus in unknown state. irq_status: 0x%x\n", 439 irq_status); 440 bus->cmd_err = -EIO; 441 if (bus->master_state != ASPEED_I2C_MASTER_STOP && 442 bus->master_state != ASPEED_I2C_MASTER_INACTIVE) 443 aspeed_i2c_do_stop(bus); 444 goto out_no_complete; 445 } 446 msg = &bus->msgs[bus->msgs_index]; 447 448 /* 449 * START is a special case because we still have to handle a subsequent 450 * TX or RX immediately after we handle it, so we handle it here and 451 * then update the state and handle the new state below. 452 */ 453 if (bus->master_state == ASPEED_I2C_MASTER_START) { 454 #if IS_ENABLED(CONFIG_I2C_SLAVE) 455 /* 456 * If a peer master starts a xfer immediately after it queues a 457 * master command, clear the queued master command and change 458 * its state to 'pending'. To simplify handling of pending 459 * cases, it uses S/W solution instead of H/W command queue 460 * handling. 461 */ 462 if (unlikely(irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH)) { 463 writel(readl(bus->base + ASPEED_I2C_CMD_REG) & 464 ~ASPEED_I2CD_MASTER_CMDS_MASK, 465 bus->base + ASPEED_I2C_CMD_REG); 466 bus->master_state = ASPEED_I2C_MASTER_PENDING; 467 dev_dbg(bus->dev, 468 "master goes pending due to a slave start\n"); 469 goto out_no_complete; 470 } 471 #endif /* CONFIG_I2C_SLAVE */ 472 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { 473 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_NAK))) { 474 bus->cmd_err = -ENXIO; 475 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 476 goto out_complete; 477 } 478 pr_devel("no slave present at %02x\n", msg->addr); 479 irq_handled |= ASPEED_I2CD_INTR_TX_NAK; 480 bus->cmd_err = -ENXIO; 481 aspeed_i2c_do_stop(bus); 482 goto out_no_complete; 483 } 484 irq_handled |= ASPEED_I2CD_INTR_TX_ACK; 485 if (msg->len == 0) { /* SMBUS_QUICK */ 486 aspeed_i2c_do_stop(bus); 487 goto out_no_complete; 488 } 489 if (msg->flags & I2C_M_RD) 490 bus->master_state = ASPEED_I2C_MASTER_RX_FIRST; 491 else 492 bus->master_state = ASPEED_I2C_MASTER_TX_FIRST; 493 } 494 495 switch (bus->master_state) { 496 case ASPEED_I2C_MASTER_TX: 497 if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) { 498 dev_dbg(bus->dev, "slave NACKed TX\n"); 499 irq_handled |= ASPEED_I2CD_INTR_TX_NAK; 500 goto error_and_stop; 501 } else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { 502 dev_err(bus->dev, "slave failed to ACK TX\n"); 503 goto error_and_stop; 504 } 505 irq_handled |= ASPEED_I2CD_INTR_TX_ACK; 506 fallthrough; 507 case ASPEED_I2C_MASTER_TX_FIRST: 508 if (bus->buf_index < msg->len) { 509 bus->master_state = ASPEED_I2C_MASTER_TX; 510 writel(msg->buf[bus->buf_index++], 511 bus->base + ASPEED_I2C_BYTE_BUF_REG); 512 writel(ASPEED_I2CD_M_TX_CMD, 513 bus->base + ASPEED_I2C_CMD_REG); 514 } else { 515 aspeed_i2c_next_msg_or_stop(bus); 516 } 517 goto out_no_complete; 518 case ASPEED_I2C_MASTER_RX_FIRST: 519 /* RX may not have completed yet (only address cycle) */ 520 if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE)) 521 goto out_no_complete; 522 fallthrough; 523 case ASPEED_I2C_MASTER_RX: 524 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) { 525 dev_err(bus->dev, "master failed to RX\n"); 526 goto error_and_stop; 527 } 528 irq_handled |= ASPEED_I2CD_INTR_RX_DONE; 529 530 recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8; 531 msg->buf[bus->buf_index++] = recv_byte; 532 533 if (msg->flags & I2C_M_RECV_LEN) { 534 if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) { 535 bus->cmd_err = -EPROTO; 536 aspeed_i2c_do_stop(bus); 537 goto out_no_complete; 538 } 539 msg->len = recv_byte + 540 ((msg->flags & I2C_CLIENT_PEC) ? 2 : 1); 541 msg->flags &= ~I2C_M_RECV_LEN; 542 } 543 544 if (bus->buf_index < msg->len) { 545 bus->master_state = ASPEED_I2C_MASTER_RX; 546 command = ASPEED_I2CD_M_RX_CMD; 547 if (bus->buf_index + 1 == msg->len) 548 command |= ASPEED_I2CD_M_S_RX_CMD_LAST; 549 writel(command, bus->base + ASPEED_I2C_CMD_REG); 550 } else { 551 aspeed_i2c_next_msg_or_stop(bus); 552 } 553 goto out_no_complete; 554 case ASPEED_I2C_MASTER_STOP: 555 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) { 556 dev_err(bus->dev, 557 "master failed to STOP. irq_status:0x%x\n", 558 irq_status); 559 bus->cmd_err = -EIO; 560 /* Do not STOP as we have already tried. */ 561 } else { 562 irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP; 563 } 564 565 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 566 goto out_complete; 567 case ASPEED_I2C_MASTER_INACTIVE: 568 dev_err(bus->dev, 569 "master received interrupt 0x%08x, but is inactive\n", 570 irq_status); 571 bus->cmd_err = -EIO; 572 /* Do not STOP as we should be inactive. */ 573 goto out_complete; 574 default: 575 WARN(1, "unknown master state\n"); 576 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 577 bus->cmd_err = -EINVAL; 578 goto out_complete; 579 } 580 error_and_stop: 581 bus->cmd_err = -EIO; 582 aspeed_i2c_do_stop(bus); 583 goto out_no_complete; 584 out_complete: 585 bus->msgs = NULL; 586 if (bus->cmd_err) 587 bus->master_xfer_result = bus->cmd_err; 588 else 589 bus->master_xfer_result = bus->msgs_index + 1; 590 complete(&bus->cmd_complete); 591 out_no_complete: 592 return irq_handled; 593 } 594 595 static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id) 596 { 597 struct aspeed_i2c_bus *bus = dev_id; 598 u32 irq_received, irq_remaining, irq_handled; 599 600 spin_lock(&bus->lock); 601 irq_received = readl(bus->base + ASPEED_I2C_INTR_STS_REG); 602 /* Ack all interrupts except for Rx done */ 603 writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE, 604 bus->base + ASPEED_I2C_INTR_STS_REG); 605 readl(bus->base + ASPEED_I2C_INTR_STS_REG); 606 irq_received &= ASPEED_I2CD_INTR_RECV_MASK; 607 irq_remaining = irq_received; 608 609 #if IS_ENABLED(CONFIG_I2C_SLAVE) 610 /* 611 * In most cases, interrupt bits will be set one by one, although 612 * multiple interrupt bits could be set at the same time. It's also 613 * possible that master interrupt bits could be set along with slave 614 * interrupt bits. Each case needs to be handled using corresponding 615 * handlers depending on the current state. 616 */ 617 if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE && 618 bus->master_state != ASPEED_I2C_MASTER_PENDING) { 619 irq_handled = aspeed_i2c_master_irq(bus, irq_remaining); 620 irq_remaining &= ~irq_handled; 621 if (irq_remaining) 622 irq_handled |= aspeed_i2c_slave_irq(bus, irq_remaining); 623 } else { 624 irq_handled = aspeed_i2c_slave_irq(bus, irq_remaining); 625 irq_remaining &= ~irq_handled; 626 if (irq_remaining) 627 irq_handled |= aspeed_i2c_master_irq(bus, 628 irq_remaining); 629 } 630 631 /* 632 * Start a pending master command at here if a slave operation is 633 * completed. 634 */ 635 if (bus->master_state == ASPEED_I2C_MASTER_PENDING && 636 bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE) 637 aspeed_i2c_do_start(bus); 638 #else 639 irq_handled = aspeed_i2c_master_irq(bus, irq_remaining); 640 #endif /* CONFIG_I2C_SLAVE */ 641 642 irq_remaining &= ~irq_handled; 643 if (irq_remaining) 644 dev_err(bus->dev, 645 "irq handled != irq. expected 0x%08x, but was 0x%08x\n", 646 irq_received, irq_handled); 647 648 /* Ack Rx done */ 649 if (irq_received & ASPEED_I2CD_INTR_RX_DONE) { 650 writel(ASPEED_I2CD_INTR_RX_DONE, 651 bus->base + ASPEED_I2C_INTR_STS_REG); 652 readl(bus->base + ASPEED_I2C_INTR_STS_REG); 653 } 654 spin_unlock(&bus->lock); 655 return irq_remaining ? IRQ_NONE : IRQ_HANDLED; 656 } 657 658 static int aspeed_i2c_master_xfer(struct i2c_adapter *adap, 659 struct i2c_msg *msgs, int num) 660 { 661 struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap); 662 unsigned long time_left, flags; 663 664 spin_lock_irqsave(&bus->lock, flags); 665 bus->cmd_err = 0; 666 667 /* If bus is busy in a single master environment, attempt recovery. */ 668 if (!bus->multi_master && 669 (readl(bus->base + ASPEED_I2C_CMD_REG) & 670 ASPEED_I2CD_BUS_BUSY_STS)) { 671 int ret; 672 673 spin_unlock_irqrestore(&bus->lock, flags); 674 ret = aspeed_i2c_recover_bus(bus); 675 if (ret) 676 return ret; 677 spin_lock_irqsave(&bus->lock, flags); 678 } 679 680 bus->cmd_err = 0; 681 bus->msgs = msgs; 682 bus->msgs_index = 0; 683 bus->msgs_count = num; 684 685 reinit_completion(&bus->cmd_complete); 686 aspeed_i2c_do_start(bus); 687 spin_unlock_irqrestore(&bus->lock, flags); 688 689 time_left = wait_for_completion_timeout(&bus->cmd_complete, 690 bus->adap.timeout); 691 692 if (time_left == 0) { 693 /* 694 * If timed out and bus is still busy in a multi master 695 * environment, attempt recovery at here. 696 */ 697 if (bus->multi_master && 698 (readl(bus->base + ASPEED_I2C_CMD_REG) & 699 ASPEED_I2CD_BUS_BUSY_STS)) 700 aspeed_i2c_recover_bus(bus); 701 702 /* 703 * If timed out and the state is still pending, drop the pending 704 * master command. 705 */ 706 spin_lock_irqsave(&bus->lock, flags); 707 if (bus->master_state == ASPEED_I2C_MASTER_PENDING) 708 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 709 spin_unlock_irqrestore(&bus->lock, flags); 710 711 return -ETIMEDOUT; 712 } 713 714 return bus->master_xfer_result; 715 } 716 717 static u32 aspeed_i2c_functionality(struct i2c_adapter *adap) 718 { 719 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA; 720 } 721 722 #if IS_ENABLED(CONFIG_I2C_SLAVE) 723 /* precondition: bus.lock has been acquired. */ 724 static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr) 725 { 726 u32 addr_reg_val, func_ctrl_reg_val; 727 728 /* 729 * Set slave addr. Reserved bits can all safely be written with zeros 730 * on all of ast2[456]00, so zero everything else to ensure we only 731 * enable a single slave address (ast2500 has two, ast2600 has three, 732 * the enable bits for which are also in this register) so that we don't 733 * end up with additional phantom devices responding on the bus. 734 */ 735 addr_reg_val = slave_addr & ASPEED_I2CD_DEV_ADDR_MASK; 736 writel(addr_reg_val, bus->base + ASPEED_I2C_DEV_ADDR_REG); 737 738 /* Turn on slave mode. */ 739 func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG); 740 func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN; 741 writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG); 742 } 743 744 static int aspeed_i2c_reg_slave(struct i2c_client *client) 745 { 746 struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter); 747 unsigned long flags; 748 749 spin_lock_irqsave(&bus->lock, flags); 750 if (bus->slave) { 751 spin_unlock_irqrestore(&bus->lock, flags); 752 return -EINVAL; 753 } 754 755 __aspeed_i2c_reg_slave(bus, client->addr); 756 757 bus->slave = client; 758 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; 759 spin_unlock_irqrestore(&bus->lock, flags); 760 761 return 0; 762 } 763 764 static int aspeed_i2c_unreg_slave(struct i2c_client *client) 765 { 766 struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter); 767 u32 func_ctrl_reg_val; 768 unsigned long flags; 769 770 spin_lock_irqsave(&bus->lock, flags); 771 if (!bus->slave) { 772 spin_unlock_irqrestore(&bus->lock, flags); 773 return -EINVAL; 774 } 775 776 /* Turn off slave mode. */ 777 func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG); 778 func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN; 779 writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG); 780 781 bus->slave = NULL; 782 spin_unlock_irqrestore(&bus->lock, flags); 783 784 return 0; 785 } 786 #endif /* CONFIG_I2C_SLAVE */ 787 788 static const struct i2c_algorithm aspeed_i2c_algo = { 789 .master_xfer = aspeed_i2c_master_xfer, 790 .functionality = aspeed_i2c_functionality, 791 #if IS_ENABLED(CONFIG_I2C_SLAVE) 792 .reg_slave = aspeed_i2c_reg_slave, 793 .unreg_slave = aspeed_i2c_unreg_slave, 794 #endif /* CONFIG_I2C_SLAVE */ 795 }; 796 797 static u32 aspeed_i2c_get_clk_reg_val(struct device *dev, 798 u32 clk_high_low_mask, 799 u32 divisor) 800 { 801 u32 base_clk_divisor, clk_high_low_max, clk_high, clk_low, tmp; 802 803 /* 804 * SCL_high and SCL_low represent a value 1 greater than what is stored 805 * since a zero divider is meaningless. Thus, the max value each can 806 * store is every bit set + 1. Since SCL_high and SCL_low are added 807 * together (see below), the max value of both is the max value of one 808 * them times two. 809 */ 810 clk_high_low_max = (clk_high_low_mask + 1) * 2; 811 812 /* 813 * The actual clock frequency of SCL is: 814 * SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low)) 815 * = APB_freq / divisor 816 * where base_freq is a programmable clock divider; its value is 817 * base_freq = 1 << base_clk_divisor 818 * SCL_high is the number of base_freq clock cycles that SCL stays high 819 * and SCL_low is the number of base_freq clock cycles that SCL stays 820 * low for a period of SCL. 821 * The actual register has a minimum SCL_high and SCL_low minimum of 1; 822 * thus, they start counting at zero. So 823 * SCL_high = clk_high + 1 824 * SCL_low = clk_low + 1 825 * Thus, 826 * SCL_freq = APB_freq / 827 * ((1 << base_clk_divisor) * (clk_high + 1 + clk_low + 1)) 828 * The documentation recommends clk_high >= clk_high_max / 2 and 829 * clk_low >= clk_low_max / 2 - 1 when possible; this last constraint 830 * gives us the following solution: 831 */ 832 base_clk_divisor = divisor > clk_high_low_max ? 833 ilog2((divisor - 1) / clk_high_low_max) + 1 : 0; 834 835 if (base_clk_divisor > ASPEED_I2CD_TIME_BASE_DIVISOR_MASK) { 836 base_clk_divisor = ASPEED_I2CD_TIME_BASE_DIVISOR_MASK; 837 clk_low = clk_high_low_mask; 838 clk_high = clk_high_low_mask; 839 dev_err(dev, 840 "clamping clock divider: divider requested, %u, is greater than largest possible divider, %u.\n", 841 divisor, (1 << base_clk_divisor) * clk_high_low_max); 842 } else { 843 tmp = (divisor + (1 << base_clk_divisor) - 1) 844 >> base_clk_divisor; 845 clk_low = tmp / 2; 846 clk_high = tmp - clk_low; 847 848 if (clk_high) 849 clk_high--; 850 851 if (clk_low) 852 clk_low--; 853 } 854 855 856 return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT) 857 & ASPEED_I2CD_TIME_SCL_HIGH_MASK) 858 | ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT) 859 & ASPEED_I2CD_TIME_SCL_LOW_MASK) 860 | (base_clk_divisor 861 & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK); 862 } 863 864 static u32 aspeed_i2c_24xx_get_clk_reg_val(struct device *dev, u32 divisor) 865 { 866 /* 867 * clk_high and clk_low are each 3 bits wide, so each can hold a max 868 * value of 8 giving a clk_high_low_max of 16. 869 */ 870 return aspeed_i2c_get_clk_reg_val(dev, GENMASK(2, 0), divisor); 871 } 872 873 static u32 aspeed_i2c_25xx_get_clk_reg_val(struct device *dev, u32 divisor) 874 { 875 /* 876 * clk_high and clk_low are each 4 bits wide, so each can hold a max 877 * value of 16 giving a clk_high_low_max of 32. 878 */ 879 return aspeed_i2c_get_clk_reg_val(dev, GENMASK(3, 0), divisor); 880 } 881 882 /* precondition: bus.lock has been acquired. */ 883 static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus) 884 { 885 u32 divisor, clk_reg_val; 886 887 divisor = DIV_ROUND_UP(bus->parent_clk_frequency, bus->bus_frequency); 888 clk_reg_val = readl(bus->base + ASPEED_I2C_AC_TIMING_REG1); 889 clk_reg_val &= (ASPEED_I2CD_TIME_TBUF_MASK | 890 ASPEED_I2CD_TIME_THDSTA_MASK | 891 ASPEED_I2CD_TIME_TACST_MASK); 892 clk_reg_val |= bus->get_clk_reg_val(bus->dev, divisor); 893 writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1); 894 writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2); 895 896 return 0; 897 } 898 899 /* precondition: bus.lock has been acquired. */ 900 static int aspeed_i2c_init(struct aspeed_i2c_bus *bus, 901 struct platform_device *pdev) 902 { 903 u32 fun_ctrl_reg = ASPEED_I2CD_MASTER_EN; 904 int ret; 905 906 /* Disable everything. */ 907 writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG); 908 909 ret = aspeed_i2c_init_clk(bus); 910 if (ret < 0) 911 return ret; 912 913 if (of_property_read_bool(pdev->dev.of_node, "multi-master")) 914 bus->multi_master = true; 915 else 916 fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS; 917 918 /* Enable Master Mode */ 919 writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg, 920 bus->base + ASPEED_I2C_FUN_CTRL_REG); 921 922 #if IS_ENABLED(CONFIG_I2C_SLAVE) 923 /* If slave has already been registered, re-enable it. */ 924 if (bus->slave) 925 __aspeed_i2c_reg_slave(bus, bus->slave->addr); 926 #endif /* CONFIG_I2C_SLAVE */ 927 928 /* Set interrupt generation of I2C controller */ 929 writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG); 930 931 return 0; 932 } 933 934 static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus) 935 { 936 struct platform_device *pdev = to_platform_device(bus->dev); 937 unsigned long flags; 938 int ret; 939 940 spin_lock_irqsave(&bus->lock, flags); 941 942 /* Disable and ack all interrupts. */ 943 writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); 944 writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG); 945 946 ret = aspeed_i2c_init(bus, pdev); 947 948 spin_unlock_irqrestore(&bus->lock, flags); 949 950 return ret; 951 } 952 953 static const struct of_device_id aspeed_i2c_bus_of_table[] = { 954 { 955 .compatible = "aspeed,ast2400-i2c-bus", 956 .data = aspeed_i2c_24xx_get_clk_reg_val, 957 }, 958 { 959 .compatible = "aspeed,ast2500-i2c-bus", 960 .data = aspeed_i2c_25xx_get_clk_reg_val, 961 }, 962 { 963 .compatible = "aspeed,ast2600-i2c-bus", 964 .data = aspeed_i2c_25xx_get_clk_reg_val, 965 }, 966 { }, 967 }; 968 MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table); 969 970 static int aspeed_i2c_probe_bus(struct platform_device *pdev) 971 { 972 const struct of_device_id *match; 973 struct aspeed_i2c_bus *bus; 974 struct clk *parent_clk; 975 struct resource *res; 976 int irq, ret; 977 978 bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); 979 if (!bus) 980 return -ENOMEM; 981 982 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 983 bus->base = devm_ioremap_resource(&pdev->dev, res); 984 if (IS_ERR(bus->base)) 985 return PTR_ERR(bus->base); 986 987 parent_clk = devm_clk_get(&pdev->dev, NULL); 988 if (IS_ERR(parent_clk)) 989 return PTR_ERR(parent_clk); 990 bus->parent_clk_frequency = clk_get_rate(parent_clk); 991 /* We just need the clock rate, we don't actually use the clk object. */ 992 devm_clk_put(&pdev->dev, parent_clk); 993 994 bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL); 995 if (IS_ERR(bus->rst)) { 996 dev_err(&pdev->dev, 997 "missing or invalid reset controller device tree entry\n"); 998 return PTR_ERR(bus->rst); 999 } 1000 reset_control_deassert(bus->rst); 1001 1002 ret = of_property_read_u32(pdev->dev.of_node, 1003 "bus-frequency", &bus->bus_frequency); 1004 if (ret < 0) { 1005 dev_err(&pdev->dev, 1006 "Could not read bus-frequency property\n"); 1007 bus->bus_frequency = I2C_MAX_STANDARD_MODE_FREQ; 1008 } 1009 1010 match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node); 1011 if (!match) 1012 bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val; 1013 else 1014 bus->get_clk_reg_val = (u32 (*)(struct device *, u32)) 1015 match->data; 1016 1017 /* Initialize the I2C adapter */ 1018 spin_lock_init(&bus->lock); 1019 init_completion(&bus->cmd_complete); 1020 bus->adap.owner = THIS_MODULE; 1021 bus->adap.retries = 0; 1022 bus->adap.algo = &aspeed_i2c_algo; 1023 bus->adap.dev.parent = &pdev->dev; 1024 bus->adap.dev.of_node = pdev->dev.of_node; 1025 strlcpy(bus->adap.name, pdev->name, sizeof(bus->adap.name)); 1026 i2c_set_adapdata(&bus->adap, bus); 1027 1028 bus->dev = &pdev->dev; 1029 1030 /* Clean up any left over interrupt state. */ 1031 writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); 1032 writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG); 1033 /* 1034 * bus.lock does not need to be held because the interrupt handler has 1035 * not been enabled yet. 1036 */ 1037 ret = aspeed_i2c_init(bus, pdev); 1038 if (ret < 0) 1039 return ret; 1040 1041 irq = irq_of_parse_and_map(pdev->dev.of_node, 0); 1042 ret = devm_request_irq(&pdev->dev, irq, aspeed_i2c_bus_irq, 1043 0, dev_name(&pdev->dev), bus); 1044 if (ret < 0) 1045 return ret; 1046 1047 ret = i2c_add_adapter(&bus->adap); 1048 if (ret < 0) 1049 return ret; 1050 1051 platform_set_drvdata(pdev, bus); 1052 1053 dev_info(bus->dev, "i2c bus %d registered, irq %d\n", 1054 bus->adap.nr, irq); 1055 1056 return 0; 1057 } 1058 1059 static int aspeed_i2c_remove_bus(struct platform_device *pdev) 1060 { 1061 struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev); 1062 unsigned long flags; 1063 1064 spin_lock_irqsave(&bus->lock, flags); 1065 1066 /* Disable everything. */ 1067 writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG); 1068 writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); 1069 1070 spin_unlock_irqrestore(&bus->lock, flags); 1071 1072 reset_control_assert(bus->rst); 1073 1074 i2c_del_adapter(&bus->adap); 1075 1076 return 0; 1077 } 1078 1079 static struct platform_driver aspeed_i2c_bus_driver = { 1080 .probe = aspeed_i2c_probe_bus, 1081 .remove = aspeed_i2c_remove_bus, 1082 .driver = { 1083 .name = "aspeed-i2c-bus", 1084 .of_match_table = aspeed_i2c_bus_of_table, 1085 }, 1086 }; 1087 module_platform_driver(aspeed_i2c_bus_driver); 1088 1089 MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>"); 1090 MODULE_DESCRIPTION("Aspeed I2C Bus Driver"); 1091 MODULE_LICENSE("GPL v2"); 1092