xref: /openbmc/linux/drivers/i2c/busses/i2c-altera.c (revision 35267cea)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  Copyright Intel Corporation (C) 2017.
4  *
5  * Based on the i2c-axxia.c driver.
6  */
7 #include <linux/clk.h>
8 #include <linux/clkdev.h>
9 #include <linux/err.h>
10 #include <linux/i2c.h>
11 #include <linux/iopoll.h>
12 #include <linux/interrupt.h>
13 #include <linux/module.h>
14 #include <linux/io.h>
15 #include <linux/kernel.h>
16 #include <linux/platform_device.h>
17 
18 #define ALTR_I2C_TFR_CMD	0x00	/* Transfer Command register */
19 #define     ALTR_I2C_TFR_CMD_STA	BIT(9)	/* send START before byte */
20 #define     ALTR_I2C_TFR_CMD_STO	BIT(8)	/* send STOP after byte */
21 #define     ALTR_I2C_TFR_CMD_RW_D	BIT(0)	/* Direction of transfer */
22 #define ALTR_I2C_RX_DATA	0x04	/* RX data FIFO register */
23 #define ALTR_I2C_CTRL		0x08	/* Control register */
24 #define     ALTR_I2C_CTRL_RXT_SHFT	4	/* RX FIFO Threshold */
25 #define     ALTR_I2C_CTRL_TCT_SHFT	2	/* TFER CMD FIFO Threshold */
26 #define     ALTR_I2C_CTRL_BSPEED	BIT(1)	/* Bus Speed (1=Fast) */
27 #define     ALTR_I2C_CTRL_EN	BIT(0)	/* Enable Core (1=Enable) */
28 #define ALTR_I2C_ISER		0x0C	/* Interrupt Status Enable register */
29 #define     ALTR_I2C_ISER_RXOF_EN	BIT(4)	/* Enable RX OVERFLOW IRQ */
30 #define     ALTR_I2C_ISER_ARB_EN	BIT(3)	/* Enable ARB LOST IRQ */
31 #define     ALTR_I2C_ISER_NACK_EN	BIT(2)	/* Enable NACK DET IRQ */
32 #define     ALTR_I2C_ISER_RXRDY_EN	BIT(1)	/* Enable RX Ready IRQ */
33 #define     ALTR_I2C_ISER_TXRDY_EN	BIT(0)	/* Enable TX Ready IRQ */
34 #define ALTR_I2C_ISR		0x10	/* Interrupt Status register */
35 #define     ALTR_I2C_ISR_RXOF		BIT(4)	/* RX OVERFLOW IRQ */
36 #define     ALTR_I2C_ISR_ARB		BIT(3)	/* ARB LOST IRQ */
37 #define     ALTR_I2C_ISR_NACK		BIT(2)	/* NACK DET IRQ */
38 #define     ALTR_I2C_ISR_RXRDY		BIT(1)	/* RX Ready IRQ */
39 #define     ALTR_I2C_ISR_TXRDY		BIT(0)	/* TX Ready IRQ */
40 #define ALTR_I2C_STATUS		0x14	/* Status register */
41 #define     ALTR_I2C_STAT_CORE		BIT(0)	/* Core Status (0=idle) */
42 #define ALTR_I2C_TC_FIFO_LVL	0x18	/* Transfer FIFO LVL register */
43 #define ALTR_I2C_RX_FIFO_LVL	0x1C	/* Receive FIFO LVL register */
44 #define ALTR_I2C_SCL_LOW	0x20	/* SCL low count register */
45 #define ALTR_I2C_SCL_HIGH	0x24	/* SCL high count register */
46 #define ALTR_I2C_SDA_HOLD	0x28	/* SDA hold count register */
47 
48 #define ALTR_I2C_ALL_IRQ	(ALTR_I2C_ISR_RXOF | ALTR_I2C_ISR_ARB | \
49 				 ALTR_I2C_ISR_NACK | ALTR_I2C_ISR_RXRDY | \
50 				 ALTR_I2C_ISR_TXRDY)
51 
52 #define ALTR_I2C_THRESHOLD	0	/* IRQ Threshold at 1 element */
53 #define ALTR_I2C_DFLT_FIFO_SZ	4
54 #define ALTR_I2C_TIMEOUT	100000	/* 100ms */
55 #define ALTR_I2C_XFER_TIMEOUT	(msecs_to_jiffies(250))
56 
57 /**
58  * struct altr_i2c_dev - I2C device context
59  * @base: pointer to register struct
60  * @msg: pointer to current message
61  * @msg_len: number of bytes transferred in msg
62  * @msg_err: error code for completed message
63  * @msg_complete: xfer completion object
64  * @dev: device reference
65  * @adapter: core i2c abstraction
66  * @i2c_clk: clock reference for i2c input clock
67  * @bus_clk_rate: current i2c bus clock rate
68  * @buf: ptr to msg buffer for easier use.
69  * @fifo_size: size of the FIFO passed in.
70  * @isr_mask: cached copy of local ISR enables.
71  * @isr_status: cached copy of local ISR status.
72  * @isr_mutex: mutex for IRQ thread.
73  */
74 struct altr_i2c_dev {
75 	void __iomem *base;
76 	struct i2c_msg *msg;
77 	size_t msg_len;
78 	int msg_err;
79 	struct completion msg_complete;
80 	struct device *dev;
81 	struct i2c_adapter adapter;
82 	struct clk *i2c_clk;
83 	u32 bus_clk_rate;
84 	u8 *buf;
85 	u32 fifo_size;
86 	u32 isr_mask;
87 	u32 isr_status;
88 	struct mutex isr_mutex;
89 };
90 
91 static void
92 altr_i2c_int_enable(struct altr_i2c_dev *idev, u32 mask, bool enable)
93 {
94 	u32 int_en;
95 
96 	int_en = readl(idev->base + ALTR_I2C_ISER);
97 	if (enable)
98 		idev->isr_mask = int_en | mask;
99 	else
100 		idev->isr_mask = int_en & ~mask;
101 
102 	writel(idev->isr_mask, idev->base + ALTR_I2C_ISER);
103 }
104 
105 static void altr_i2c_int_clear(struct altr_i2c_dev *idev, u32 mask)
106 {
107 	u32 int_en = readl(idev->base + ALTR_I2C_ISR);
108 
109 	writel(int_en | mask, idev->base + ALTR_I2C_ISR);
110 }
111 
112 static void altr_i2c_core_disable(struct altr_i2c_dev *idev)
113 {
114 	u32 tmp = readl(idev->base + ALTR_I2C_CTRL);
115 
116 	writel(tmp & ~ALTR_I2C_CTRL_EN, idev->base + ALTR_I2C_CTRL);
117 }
118 
119 static void altr_i2c_core_enable(struct altr_i2c_dev *idev)
120 {
121 	u32 tmp = readl(idev->base + ALTR_I2C_CTRL);
122 
123 	writel(tmp | ALTR_I2C_CTRL_EN, idev->base + ALTR_I2C_CTRL);
124 }
125 
126 static void altr_i2c_reset(struct altr_i2c_dev *idev)
127 {
128 	altr_i2c_core_disable(idev);
129 	altr_i2c_core_enable(idev);
130 }
131 
132 static inline void altr_i2c_stop(struct altr_i2c_dev *idev)
133 {
134 	writel(ALTR_I2C_TFR_CMD_STO, idev->base + ALTR_I2C_TFR_CMD);
135 }
136 
137 static void altr_i2c_init(struct altr_i2c_dev *idev)
138 {
139 	u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate;
140 	u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000;
141 	u32 tmp = (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_RXT_SHFT) |
142 		  (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_TCT_SHFT);
143 	u32 t_high, t_low;
144 
145 	if (idev->bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ) {
146 		tmp &= ~ALTR_I2C_CTRL_BSPEED;
147 		/* Standard mode SCL 50/50 */
148 		t_high = divisor * 1 / 2;
149 		t_low = divisor * 1 / 2;
150 	} else {
151 		tmp |= ALTR_I2C_CTRL_BSPEED;
152 		/* Fast mode SCL 33/66 */
153 		t_high = divisor * 1 / 3;
154 		t_low = divisor * 2 / 3;
155 	}
156 	writel(tmp, idev->base + ALTR_I2C_CTRL);
157 
158 	dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n",
159 		idev->bus_clk_rate, clk_mhz, divisor);
160 
161 	/* Reset controller */
162 	altr_i2c_reset(idev);
163 
164 	/* SCL High Time */
165 	writel(t_high, idev->base + ALTR_I2C_SCL_HIGH);
166 	/* SCL Low Time */
167 	writel(t_low, idev->base + ALTR_I2C_SCL_LOW);
168 	/* SDA Hold Time, 300ns */
169 	writel(3 * clk_mhz / 10, idev->base + ALTR_I2C_SDA_HOLD);
170 
171 	/* Mask all master interrupt bits */
172 	altr_i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false);
173 }
174 
175 /*
176  * altr_i2c_transfer - On the last byte to be transmitted, send
177  * a Stop bit on the last byte.
178  */
179 static void altr_i2c_transfer(struct altr_i2c_dev *idev, u32 data)
180 {
181 	/* On the last byte to be transmitted, send STOP */
182 	if (idev->msg_len == 1)
183 		data |= ALTR_I2C_TFR_CMD_STO;
184 	if (idev->msg_len > 0)
185 		writel(data, idev->base + ALTR_I2C_TFR_CMD);
186 }
187 
188 /*
189  * altr_i2c_empty_rx_fifo - Fetch data from RX FIFO until end of
190  * transfer. Send a Stop bit on the last byte.
191  */
192 static void altr_i2c_empty_rx_fifo(struct altr_i2c_dev *idev)
193 {
194 	size_t rx_fifo_avail = readl(idev->base + ALTR_I2C_RX_FIFO_LVL);
195 	int bytes_to_transfer = min(rx_fifo_avail, idev->msg_len);
196 
197 	while (bytes_to_transfer-- > 0) {
198 		*idev->buf++ = readl(idev->base + ALTR_I2C_RX_DATA);
199 		idev->msg_len--;
200 		altr_i2c_transfer(idev, 0);
201 	}
202 }
203 
204 /*
205  * altr_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
206  */
207 static int altr_i2c_fill_tx_fifo(struct altr_i2c_dev *idev)
208 {
209 	size_t tx_fifo_avail = idev->fifo_size - readl(idev->base +
210 						       ALTR_I2C_TC_FIFO_LVL);
211 	int bytes_to_transfer = min(tx_fifo_avail, idev->msg_len);
212 	int ret = idev->msg_len - bytes_to_transfer;
213 
214 	while (bytes_to_transfer-- > 0) {
215 		altr_i2c_transfer(idev, *idev->buf++);
216 		idev->msg_len--;
217 	}
218 
219 	return ret;
220 }
221 
222 static irqreturn_t altr_i2c_isr_quick(int irq, void *_dev)
223 {
224 	struct altr_i2c_dev *idev = _dev;
225 	irqreturn_t ret = IRQ_HANDLED;
226 
227 	/* Read IRQ status but only interested in Enabled IRQs. */
228 	idev->isr_status = readl(idev->base + ALTR_I2C_ISR) & idev->isr_mask;
229 	if (idev->isr_status)
230 		ret = IRQ_WAKE_THREAD;
231 
232 	return ret;
233 }
234 
235 static irqreturn_t altr_i2c_isr(int irq, void *_dev)
236 {
237 	int ret;
238 	bool read, finish = false;
239 	struct altr_i2c_dev *idev = _dev;
240 	u32 status = idev->isr_status;
241 
242 	mutex_lock(&idev->isr_mutex);
243 	if (!idev->msg) {
244 		dev_warn(idev->dev, "unexpected interrupt\n");
245 		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
246 		goto out;
247 	}
248 	read = (idev->msg->flags & I2C_M_RD) != 0;
249 
250 	/* handle Lost Arbitration */
251 	if (unlikely(status & ALTR_I2C_ISR_ARB)) {
252 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_ARB);
253 		idev->msg_err = -EAGAIN;
254 		finish = true;
255 	} else if (unlikely(status & ALTR_I2C_ISR_NACK)) {
256 		dev_dbg(idev->dev, "Could not get ACK\n");
257 		idev->msg_err = -ENXIO;
258 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_NACK);
259 		altr_i2c_stop(idev);
260 		finish = true;
261 	} else if (read && unlikely(status & ALTR_I2C_ISR_RXOF)) {
262 		/* handle RX FIFO Overflow */
263 		altr_i2c_empty_rx_fifo(idev);
264 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_RXRDY);
265 		altr_i2c_stop(idev);
266 		dev_err(idev->dev, "RX FIFO Overflow\n");
267 		finish = true;
268 	} else if (read && (status & ALTR_I2C_ISR_RXRDY)) {
269 		/* RX FIFO needs service? */
270 		altr_i2c_empty_rx_fifo(idev);
271 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_RXRDY);
272 		if (!idev->msg_len)
273 			finish = true;
274 	} else if (!read && (status & ALTR_I2C_ISR_TXRDY)) {
275 		/* TX FIFO needs service? */
276 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_TXRDY);
277 		if (idev->msg_len > 0)
278 			altr_i2c_fill_tx_fifo(idev);
279 		else
280 			finish = true;
281 	} else {
282 		dev_warn(idev->dev, "Unexpected interrupt: 0x%x\n", status);
283 		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
284 	}
285 
286 	if (finish) {
287 		/* Wait for the Core to finish */
288 		ret = readl_poll_timeout_atomic(idev->base + ALTR_I2C_STATUS,
289 						status,
290 						!(status & ALTR_I2C_STAT_CORE),
291 						1, ALTR_I2C_TIMEOUT);
292 		if (ret)
293 			dev_err(idev->dev, "message timeout\n");
294 		altr_i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false);
295 		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
296 		complete(&idev->msg_complete);
297 		dev_dbg(idev->dev, "Message Complete\n");
298 	}
299 out:
300 	mutex_unlock(&idev->isr_mutex);
301 
302 	return IRQ_HANDLED;
303 }
304 
305 static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg)
306 {
307 	u32 imask = ALTR_I2C_ISR_RXOF | ALTR_I2C_ISR_ARB | ALTR_I2C_ISR_NACK;
308 	unsigned long time_left;
309 	u32 value;
310 	u8 addr = i2c_8bit_addr_from_msg(msg);
311 
312 	mutex_lock(&idev->isr_mutex);
313 	idev->msg = msg;
314 	idev->msg_len = msg->len;
315 	idev->buf = msg->buf;
316 	idev->msg_err = 0;
317 	reinit_completion(&idev->msg_complete);
318 	altr_i2c_core_enable(idev);
319 
320 	/* Make sure RX FIFO is empty */
321 	do {
322 		readl(idev->base + ALTR_I2C_RX_DATA);
323 	} while (readl(idev->base + ALTR_I2C_RX_FIFO_LVL));
324 
325 	writel(ALTR_I2C_TFR_CMD_STA | addr, idev->base + ALTR_I2C_TFR_CMD);
326 
327 	if ((msg->flags & I2C_M_RD) != 0) {
328 		imask |= ALTR_I2C_ISER_RXOF_EN | ALTR_I2C_ISER_RXRDY_EN;
329 		altr_i2c_int_enable(idev, imask, true);
330 		/* write the first byte to start the RX */
331 		altr_i2c_transfer(idev, 0);
332 	} else {
333 		imask |= ALTR_I2C_ISR_TXRDY;
334 		altr_i2c_int_enable(idev, imask, true);
335 		altr_i2c_fill_tx_fifo(idev);
336 	}
337 	mutex_unlock(&idev->isr_mutex);
338 
339 	time_left = wait_for_completion_timeout(&idev->msg_complete,
340 						ALTR_I2C_XFER_TIMEOUT);
341 	mutex_lock(&idev->isr_mutex);
342 	altr_i2c_int_enable(idev, imask, false);
343 
344 	value = readl(idev->base + ALTR_I2C_STATUS) & ALTR_I2C_STAT_CORE;
345 	if (value)
346 		dev_err(idev->dev, "Core Status not IDLE...\n");
347 
348 	if (time_left == 0) {
349 		idev->msg_err = -ETIMEDOUT;
350 		dev_dbg(idev->dev, "Transaction timed out.\n");
351 	}
352 
353 	altr_i2c_core_disable(idev);
354 	mutex_unlock(&idev->isr_mutex);
355 
356 	return idev->msg_err;
357 }
358 
359 static int
360 altr_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
361 {
362 	struct altr_i2c_dev *idev = i2c_get_adapdata(adap);
363 	int i, ret;
364 
365 	for (i = 0; i < num; i++) {
366 		ret = altr_i2c_xfer_msg(idev, msgs++);
367 		if (ret)
368 			return ret;
369 	}
370 	return num;
371 }
372 
373 static u32 altr_i2c_func(struct i2c_adapter *adap)
374 {
375 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
376 }
377 
378 static const struct i2c_algorithm altr_i2c_algo = {
379 	.master_xfer = altr_i2c_xfer,
380 	.functionality = altr_i2c_func,
381 };
382 
383 static int altr_i2c_probe(struct platform_device *pdev)
384 {
385 	struct altr_i2c_dev *idev = NULL;
386 	int irq, ret;
387 
388 	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
389 	if (!idev)
390 		return -ENOMEM;
391 
392 	idev->base = devm_platform_ioremap_resource(pdev, 0);
393 	if (IS_ERR(idev->base))
394 		return PTR_ERR(idev->base);
395 
396 	irq = platform_get_irq(pdev, 0);
397 	if (irq < 0)
398 		return irq;
399 
400 	idev->i2c_clk = devm_clk_get(&pdev->dev, NULL);
401 	if (IS_ERR(idev->i2c_clk)) {
402 		dev_err(&pdev->dev, "missing clock\n");
403 		return PTR_ERR(idev->i2c_clk);
404 	}
405 
406 	idev->dev = &pdev->dev;
407 	init_completion(&idev->msg_complete);
408 	mutex_init(&idev->isr_mutex);
409 
410 	ret = device_property_read_u32(idev->dev, "fifo-size",
411 				       &idev->fifo_size);
412 	if (ret) {
413 		dev_err(&pdev->dev, "FIFO size set to default of %d\n",
414 			ALTR_I2C_DFLT_FIFO_SZ);
415 		idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ;
416 	}
417 
418 	ret = device_property_read_u32(idev->dev, "clock-frequency",
419 				       &idev->bus_clk_rate);
420 	if (ret) {
421 		dev_err(&pdev->dev, "Default to 100kHz\n");
422 		idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;	/* default clock rate */
423 	}
424 
425 	if (idev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ) {
426 		dev_err(&pdev->dev, "invalid clock-frequency %d\n",
427 			idev->bus_clk_rate);
428 		return -EINVAL;
429 	}
430 
431 	ret = devm_request_threaded_irq(&pdev->dev, irq, altr_i2c_isr_quick,
432 					altr_i2c_isr, IRQF_ONESHOT,
433 					pdev->name, idev);
434 	if (ret) {
435 		dev_err(&pdev->dev, "failed to claim IRQ %d\n", irq);
436 		return ret;
437 	}
438 
439 	ret = clk_prepare_enable(idev->i2c_clk);
440 	if (ret) {
441 		dev_err(&pdev->dev, "failed to enable clock\n");
442 		return ret;
443 	}
444 
445 	mutex_lock(&idev->isr_mutex);
446 	altr_i2c_init(idev);
447 	mutex_unlock(&idev->isr_mutex);
448 
449 	i2c_set_adapdata(&idev->adapter, idev);
450 	strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
451 	idev->adapter.owner = THIS_MODULE;
452 	idev->adapter.algo = &altr_i2c_algo;
453 	idev->adapter.dev.parent = &pdev->dev;
454 	idev->adapter.dev.of_node = pdev->dev.of_node;
455 
456 	platform_set_drvdata(pdev, idev);
457 
458 	ret = i2c_add_adapter(&idev->adapter);
459 	if (ret) {
460 		clk_disable_unprepare(idev->i2c_clk);
461 		return ret;
462 	}
463 	dev_info(&pdev->dev, "Altera SoftIP I2C Probe Complete\n");
464 
465 	return 0;
466 }
467 
468 static int altr_i2c_remove(struct platform_device *pdev)
469 {
470 	struct altr_i2c_dev *idev = platform_get_drvdata(pdev);
471 
472 	clk_disable_unprepare(idev->i2c_clk);
473 	i2c_del_adapter(&idev->adapter);
474 
475 	return 0;
476 }
477 
478 /* Match table for of_platform binding */
479 static const struct of_device_id altr_i2c_of_match[] = {
480 	{ .compatible = "altr,softip-i2c-v1.0" },
481 	{},
482 };
483 MODULE_DEVICE_TABLE(of, altr_i2c_of_match);
484 
485 static struct platform_driver altr_i2c_driver = {
486 	.probe = altr_i2c_probe,
487 	.remove = altr_i2c_remove,
488 	.driver = {
489 		.name = "altera-i2c",
490 		.of_match_table = altr_i2c_of_match,
491 	},
492 };
493 
494 module_platform_driver(altr_i2c_driver);
495 
496 MODULE_DESCRIPTION("Altera Soft IP I2C bus driver");
497 MODULE_AUTHOR("Thor Thayer <thor.thayer@linux.intel.com>");
498 MODULE_LICENSE("GPL v2");
499