1 /** 2 * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge 3 * 4 * Copyright (C) 2004 Patrick Mochel 5 * 2005 Rudolf Marek <r.marek@assembler.cz> 6 * 7 * The 1563 southbridge is deceptively similar to the 1533, with a 8 * few notable exceptions. One of those happens to be the fact they 9 * upgraded the i2c core to be 2.0 compliant, and happens to be almost 10 * identical to the i2c controller found in the Intel 801 south 11 * bridges. 12 * 13 * This driver is based on a mix of the 15x3, 1535, and i801 drivers, 14 * with a little help from the ALi 1563 spec. 15 * 16 * This file is released under the GPLv2 17 */ 18 19 #include <linux/module.h> 20 #include <linux/delay.h> 21 #include <linux/i2c.h> 22 #include <linux/pci.h> 23 #include <linux/acpi.h> 24 25 #define ALI1563_MAX_TIMEOUT 500 26 #define ALI1563_SMBBA 0x80 27 #define ALI1563_SMB_IOEN 1 28 #define ALI1563_SMB_HOSTEN 2 29 #define ALI1563_SMB_IOSIZE 16 30 31 #define SMB_HST_STS (ali1563_smba + 0) 32 #define SMB_HST_CNTL1 (ali1563_smba + 1) 33 #define SMB_HST_CNTL2 (ali1563_smba + 2) 34 #define SMB_HST_CMD (ali1563_smba + 3) 35 #define SMB_HST_ADD (ali1563_smba + 4) 36 #define SMB_HST_DAT0 (ali1563_smba + 5) 37 #define SMB_HST_DAT1 (ali1563_smba + 6) 38 #define SMB_BLK_DAT (ali1563_smba + 7) 39 40 #define HST_STS_BUSY 0x01 41 #define HST_STS_INTR 0x02 42 #define HST_STS_DEVERR 0x04 43 #define HST_STS_BUSERR 0x08 44 #define HST_STS_FAIL 0x10 45 #define HST_STS_DONE 0x80 46 #define HST_STS_BAD 0x1c 47 48 49 #define HST_CNTL1_TIMEOUT 0x80 50 #define HST_CNTL1_LAST 0x40 51 52 #define HST_CNTL2_KILL 0x04 53 #define HST_CNTL2_START 0x40 54 #define HST_CNTL2_QUICK 0x00 55 #define HST_CNTL2_BYTE 0x01 56 #define HST_CNTL2_BYTE_DATA 0x02 57 #define HST_CNTL2_WORD_DATA 0x03 58 #define HST_CNTL2_BLOCK 0x05 59 60 61 #define HST_CNTL2_SIZEMASK 0x38 62 63 static struct pci_driver ali1563_pci_driver; 64 static unsigned short ali1563_smba; 65 66 static int ali1563_transaction(struct i2c_adapter *a, int size) 67 { 68 u32 data; 69 int timeout; 70 int status = -EIO; 71 72 dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, " 73 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", 74 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), 75 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), 76 inb_p(SMB_HST_DAT1)); 77 78 data = inb_p(SMB_HST_STS); 79 if (data & HST_STS_BAD) { 80 dev_err(&a->dev, "ali1563: Trying to reset busy device\n"); 81 outb_p(data | HST_STS_BAD, SMB_HST_STS); 82 data = inb_p(SMB_HST_STS); 83 if (data & HST_STS_BAD) 84 return -EBUSY; 85 } 86 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2); 87 88 timeout = ALI1563_MAX_TIMEOUT; 89 do { 90 msleep(1); 91 } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout); 92 93 dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, " 94 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", 95 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), 96 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), 97 inb_p(SMB_HST_DAT1)); 98 99 if (timeout && !(data & HST_STS_BAD)) 100 return 0; 101 102 if (!timeout) { 103 dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n"); 104 /* Issue 'kill' to host controller */ 105 outb_p(HST_CNTL2_KILL, SMB_HST_CNTL2); 106 data = inb_p(SMB_HST_STS); 107 status = -ETIMEDOUT; 108 } 109 110 /* device error - no response, ignore the autodetection case */ 111 if (data & HST_STS_DEVERR) { 112 if (size != HST_CNTL2_QUICK) 113 dev_err(&a->dev, "Device error!\n"); 114 status = -ENXIO; 115 } 116 /* bus collision */ 117 if (data & HST_STS_BUSERR) { 118 dev_err(&a->dev, "Bus collision!\n"); 119 /* Issue timeout, hoping it helps */ 120 outb_p(HST_CNTL1_TIMEOUT, SMB_HST_CNTL1); 121 } 122 123 if (data & HST_STS_FAIL) { 124 dev_err(&a->dev, "Cleaning fail after KILL!\n"); 125 outb_p(0x0, SMB_HST_CNTL2); 126 } 127 128 return status; 129 } 130 131 static int ali1563_block_start(struct i2c_adapter *a) 132 { 133 u32 data; 134 int timeout; 135 int status = -EIO; 136 137 dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, " 138 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", 139 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), 140 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), 141 inb_p(SMB_HST_DAT1)); 142 143 data = inb_p(SMB_HST_STS); 144 if (data & HST_STS_BAD) { 145 dev_warn(&a->dev, "ali1563: Trying to reset busy device\n"); 146 outb_p(data | HST_STS_BAD, SMB_HST_STS); 147 data = inb_p(SMB_HST_STS); 148 if (data & HST_STS_BAD) 149 return -EBUSY; 150 } 151 152 /* Clear byte-ready bit */ 153 outb_p(data | HST_STS_DONE, SMB_HST_STS); 154 155 /* Start transaction and wait for byte-ready bit to be set */ 156 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2); 157 158 timeout = ALI1563_MAX_TIMEOUT; 159 do { 160 msleep(1); 161 } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout); 162 163 dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, " 164 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", 165 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), 166 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), 167 inb_p(SMB_HST_DAT1)); 168 169 if (timeout && !(data & HST_STS_BAD)) 170 return 0; 171 172 if (timeout == 0) 173 status = -ETIMEDOUT; 174 175 if (data & HST_STS_DEVERR) 176 status = -ENXIO; 177 178 dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n", 179 timeout ? "" : "Timeout ", 180 data & HST_STS_FAIL ? "Transaction Failed " : "", 181 data & HST_STS_BUSERR ? "No response or Bus Collision " : "", 182 data & HST_STS_DEVERR ? "Device Error " : "", 183 !(data & HST_STS_DONE) ? "Transaction Never Finished " : ""); 184 return status; 185 } 186 187 static int ali1563_block(struct i2c_adapter *a, 188 union i2c_smbus_data *data, u8 rw) 189 { 190 int i, len; 191 int error = 0; 192 193 /* Do we need this? */ 194 outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1); 195 196 if (rw == I2C_SMBUS_WRITE) { 197 len = data->block[0]; 198 if (len < 1) 199 len = 1; 200 else if (len > 32) 201 len = 32; 202 outb_p(len, SMB_HST_DAT0); 203 outb_p(data->block[1], SMB_BLK_DAT); 204 } else 205 len = 32; 206 207 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2); 208 209 for (i = 0; i < len; i++) { 210 if (rw == I2C_SMBUS_WRITE) { 211 outb_p(data->block[i + 1], SMB_BLK_DAT); 212 error = ali1563_block_start(a); 213 if (error) 214 break; 215 } else { 216 error = ali1563_block_start(a); 217 if (error) 218 break; 219 if (i == 0) { 220 len = inb_p(SMB_HST_DAT0); 221 if (len < 1) 222 len = 1; 223 else if (len > 32) 224 len = 32; 225 } 226 data->block[i+1] = inb_p(SMB_BLK_DAT); 227 } 228 } 229 /* Do we need this? */ 230 outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1); 231 return error; 232 } 233 234 static s32 ali1563_access(struct i2c_adapter *a, u16 addr, 235 unsigned short flags, char rw, u8 cmd, 236 int size, union i2c_smbus_data *data) 237 { 238 int error = 0; 239 int timeout; 240 u32 reg; 241 242 for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) { 243 reg = inb_p(SMB_HST_STS); 244 if (!(reg & HST_STS_BUSY)) 245 break; 246 } 247 if (!timeout) 248 dev_warn(&a->dev, "SMBus not idle. HST_STS = %02x\n", reg); 249 outb_p(0xff, SMB_HST_STS); 250 251 /* Map the size to what the chip understands */ 252 switch (size) { 253 case I2C_SMBUS_QUICK: 254 size = HST_CNTL2_QUICK; 255 break; 256 case I2C_SMBUS_BYTE: 257 size = HST_CNTL2_BYTE; 258 break; 259 case I2C_SMBUS_BYTE_DATA: 260 size = HST_CNTL2_BYTE_DATA; 261 break; 262 case I2C_SMBUS_WORD_DATA: 263 size = HST_CNTL2_WORD_DATA; 264 break; 265 case I2C_SMBUS_BLOCK_DATA: 266 size = HST_CNTL2_BLOCK; 267 break; 268 default: 269 dev_warn(&a->dev, "Unsupported transaction %d\n", size); 270 error = -EOPNOTSUPP; 271 goto Done; 272 } 273 274 outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD); 275 outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | 276 (size << 3), SMB_HST_CNTL2); 277 278 /* Write the command register */ 279 280 switch (size) { 281 case HST_CNTL2_BYTE: 282 if (rw == I2C_SMBUS_WRITE) 283 /* Beware it uses DAT0 register and not CMD! */ 284 outb_p(cmd, SMB_HST_DAT0); 285 break; 286 case HST_CNTL2_BYTE_DATA: 287 outb_p(cmd, SMB_HST_CMD); 288 if (rw == I2C_SMBUS_WRITE) 289 outb_p(data->byte, SMB_HST_DAT0); 290 break; 291 case HST_CNTL2_WORD_DATA: 292 outb_p(cmd, SMB_HST_CMD); 293 if (rw == I2C_SMBUS_WRITE) { 294 outb_p(data->word & 0xff, SMB_HST_DAT0); 295 outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1); 296 } 297 break; 298 case HST_CNTL2_BLOCK: 299 outb_p(cmd, SMB_HST_CMD); 300 error = ali1563_block(a, data, rw); 301 goto Done; 302 } 303 304 error = ali1563_transaction(a, size); 305 if (error) 306 goto Done; 307 308 if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK)) 309 goto Done; 310 311 switch (size) { 312 case HST_CNTL2_BYTE: /* Result put in SMBHSTDAT0 */ 313 data->byte = inb_p(SMB_HST_DAT0); 314 break; 315 case HST_CNTL2_BYTE_DATA: 316 data->byte = inb_p(SMB_HST_DAT0); 317 break; 318 case HST_CNTL2_WORD_DATA: 319 data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8); 320 break; 321 } 322 Done: 323 return error; 324 } 325 326 static u32 ali1563_func(struct i2c_adapter *a) 327 { 328 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | 329 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | 330 I2C_FUNC_SMBUS_BLOCK_DATA; 331 } 332 333 334 static int ali1563_setup(struct pci_dev *dev) 335 { 336 u16 ctrl; 337 338 pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); 339 340 /* SMB I/O Base in high 12 bits and must be aligned with the 341 * size of the I/O space. */ 342 ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1); 343 if (!ali1563_smba) { 344 dev_warn(&dev->dev, "ali1563_smba Uninitialized\n"); 345 goto Err; 346 } 347 348 /* Check if device is enabled */ 349 if (!(ctrl & ALI1563_SMB_HOSTEN)) { 350 dev_warn(&dev->dev, "Host Controller not enabled\n"); 351 goto Err; 352 } 353 if (!(ctrl & ALI1563_SMB_IOEN)) { 354 dev_warn(&dev->dev, "I/O space not enabled, trying manually\n"); 355 pci_write_config_word(dev, ALI1563_SMBBA, 356 ctrl | ALI1563_SMB_IOEN); 357 pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); 358 if (!(ctrl & ALI1563_SMB_IOEN)) { 359 dev_err(&dev->dev, 360 "I/O space still not enabled, giving up\n"); 361 goto Err; 362 } 363 } 364 365 if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE, 366 ali1563_pci_driver.name)) 367 goto Err; 368 369 if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, 370 ali1563_pci_driver.name)) { 371 dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n", 372 ali1563_smba); 373 goto Err; 374 } 375 dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba); 376 377 return 0; 378 Err: 379 return -ENODEV; 380 } 381 382 static void ali1563_shutdown(struct pci_dev *dev) 383 { 384 release_region(ali1563_smba, ALI1563_SMB_IOSIZE); 385 } 386 387 static const struct i2c_algorithm ali1563_algorithm = { 388 .smbus_xfer = ali1563_access, 389 .functionality = ali1563_func, 390 }; 391 392 static struct i2c_adapter ali1563_adapter = { 393 .owner = THIS_MODULE, 394 .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, 395 .algo = &ali1563_algorithm, 396 }; 397 398 static int ali1563_probe(struct pci_dev *dev, 399 const struct pci_device_id *id_table) 400 { 401 int error; 402 403 error = ali1563_setup(dev); 404 if (error) 405 goto exit; 406 ali1563_adapter.dev.parent = &dev->dev; 407 snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name), 408 "SMBus ALi 1563 Adapter @ %04x", ali1563_smba); 409 error = i2c_add_adapter(&ali1563_adapter); 410 if (error) 411 goto exit_shutdown; 412 return 0; 413 414 exit_shutdown: 415 ali1563_shutdown(dev); 416 exit: 417 dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error); 418 return error; 419 } 420 421 static void ali1563_remove(struct pci_dev *dev) 422 { 423 i2c_del_adapter(&ali1563_adapter); 424 ali1563_shutdown(dev); 425 } 426 427 static const struct pci_device_id ali1563_id_table[] = { 428 { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) }, 429 {}, 430 }; 431 432 MODULE_DEVICE_TABLE(pci, ali1563_id_table); 433 434 static struct pci_driver ali1563_pci_driver = { 435 .name = "ali1563_smbus", 436 .id_table = ali1563_id_table, 437 .probe = ali1563_probe, 438 .remove = ali1563_remove, 439 }; 440 441 module_pci_driver(ali1563_pci_driver); 442 443 MODULE_LICENSE("GPL"); 444