1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge 4 * 5 * Copyright (C) 2004 Patrick Mochel 6 * 2005 Rudolf Marek <r.marek@assembler.cz> 7 * 8 * The 1563 southbridge is deceptively similar to the 1533, with a 9 * few notable exceptions. One of those happens to be the fact they 10 * upgraded the i2c core to be 2.0 compliant, and happens to be almost 11 * identical to the i2c controller found in the Intel 801 south 12 * bridges. 13 * 14 * This driver is based on a mix of the 15x3, 1535, and i801 drivers, 15 * with a little help from the ALi 1563 spec. 16 */ 17 18 #include <linux/module.h> 19 #include <linux/delay.h> 20 #include <linux/i2c.h> 21 #include <linux/pci.h> 22 #include <linux/acpi.h> 23 24 #define ALI1563_MAX_TIMEOUT 500 25 #define ALI1563_SMBBA 0x80 26 #define ALI1563_SMB_IOEN 1 27 #define ALI1563_SMB_HOSTEN 2 28 #define ALI1563_SMB_IOSIZE 16 29 30 #define SMB_HST_STS (ali1563_smba + 0) 31 #define SMB_HST_CNTL1 (ali1563_smba + 1) 32 #define SMB_HST_CNTL2 (ali1563_smba + 2) 33 #define SMB_HST_CMD (ali1563_smba + 3) 34 #define SMB_HST_ADD (ali1563_smba + 4) 35 #define SMB_HST_DAT0 (ali1563_smba + 5) 36 #define SMB_HST_DAT1 (ali1563_smba + 6) 37 #define SMB_BLK_DAT (ali1563_smba + 7) 38 39 #define HST_STS_BUSY 0x01 40 #define HST_STS_INTR 0x02 41 #define HST_STS_DEVERR 0x04 42 #define HST_STS_BUSERR 0x08 43 #define HST_STS_FAIL 0x10 44 #define HST_STS_DONE 0x80 45 #define HST_STS_BAD 0x1c 46 47 48 #define HST_CNTL1_TIMEOUT 0x80 49 #define HST_CNTL1_LAST 0x40 50 51 #define HST_CNTL2_KILL 0x04 52 #define HST_CNTL2_START 0x40 53 #define HST_CNTL2_QUICK 0x00 54 #define HST_CNTL2_BYTE 0x01 55 #define HST_CNTL2_BYTE_DATA 0x02 56 #define HST_CNTL2_WORD_DATA 0x03 57 #define HST_CNTL2_BLOCK 0x05 58 59 60 #define HST_CNTL2_SIZEMASK 0x38 61 62 static struct pci_driver ali1563_pci_driver; 63 static unsigned short ali1563_smba; 64 65 static int ali1563_transaction(struct i2c_adapter *a, int size) 66 { 67 u32 data; 68 int timeout; 69 int status = -EIO; 70 71 dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, " 72 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", 73 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), 74 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), 75 inb_p(SMB_HST_DAT1)); 76 77 data = inb_p(SMB_HST_STS); 78 if (data & HST_STS_BAD) { 79 dev_err(&a->dev, "ali1563: Trying to reset busy device\n"); 80 outb_p(data | HST_STS_BAD, SMB_HST_STS); 81 data = inb_p(SMB_HST_STS); 82 if (data & HST_STS_BAD) 83 return -EBUSY; 84 } 85 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2); 86 87 timeout = ALI1563_MAX_TIMEOUT; 88 do { 89 msleep(1); 90 } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout); 91 92 dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, " 93 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", 94 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), 95 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), 96 inb_p(SMB_HST_DAT1)); 97 98 if (timeout && !(data & HST_STS_BAD)) 99 return 0; 100 101 if (!timeout) { 102 dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n"); 103 /* Issue 'kill' to host controller */ 104 outb_p(HST_CNTL2_KILL, SMB_HST_CNTL2); 105 data = inb_p(SMB_HST_STS); 106 status = -ETIMEDOUT; 107 } 108 109 /* device error - no response, ignore the autodetection case */ 110 if (data & HST_STS_DEVERR) { 111 if (size != HST_CNTL2_QUICK) 112 dev_err(&a->dev, "Device error!\n"); 113 status = -ENXIO; 114 } 115 /* bus collision */ 116 if (data & HST_STS_BUSERR) { 117 dev_err(&a->dev, "Bus collision!\n"); 118 /* Issue timeout, hoping it helps */ 119 outb_p(HST_CNTL1_TIMEOUT, SMB_HST_CNTL1); 120 } 121 122 if (data & HST_STS_FAIL) { 123 dev_err(&a->dev, "Cleaning fail after KILL!\n"); 124 outb_p(0x0, SMB_HST_CNTL2); 125 } 126 127 return status; 128 } 129 130 static int ali1563_block_start(struct i2c_adapter *a) 131 { 132 u32 data; 133 int timeout; 134 int status = -EIO; 135 136 dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, " 137 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", 138 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), 139 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), 140 inb_p(SMB_HST_DAT1)); 141 142 data = inb_p(SMB_HST_STS); 143 if (data & HST_STS_BAD) { 144 dev_warn(&a->dev, "ali1563: Trying to reset busy device\n"); 145 outb_p(data | HST_STS_BAD, SMB_HST_STS); 146 data = inb_p(SMB_HST_STS); 147 if (data & HST_STS_BAD) 148 return -EBUSY; 149 } 150 151 /* Clear byte-ready bit */ 152 outb_p(data | HST_STS_DONE, SMB_HST_STS); 153 154 /* Start transaction and wait for byte-ready bit to be set */ 155 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2); 156 157 timeout = ALI1563_MAX_TIMEOUT; 158 do { 159 msleep(1); 160 } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout); 161 162 dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, " 163 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", 164 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), 165 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), 166 inb_p(SMB_HST_DAT1)); 167 168 if (timeout && !(data & HST_STS_BAD)) 169 return 0; 170 171 if (timeout == 0) 172 status = -ETIMEDOUT; 173 174 if (data & HST_STS_DEVERR) 175 status = -ENXIO; 176 177 dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n", 178 timeout ? "" : "Timeout ", 179 data & HST_STS_FAIL ? "Transaction Failed " : "", 180 data & HST_STS_BUSERR ? "No response or Bus Collision " : "", 181 data & HST_STS_DEVERR ? "Device Error " : "", 182 !(data & HST_STS_DONE) ? "Transaction Never Finished " : ""); 183 return status; 184 } 185 186 static int ali1563_block(struct i2c_adapter *a, 187 union i2c_smbus_data *data, u8 rw) 188 { 189 int i, len; 190 int error = 0; 191 192 /* Do we need this? */ 193 outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1); 194 195 if (rw == I2C_SMBUS_WRITE) { 196 len = data->block[0]; 197 if (len < 1) 198 len = 1; 199 else if (len > 32) 200 len = 32; 201 outb_p(len, SMB_HST_DAT0); 202 outb_p(data->block[1], SMB_BLK_DAT); 203 } else 204 len = 32; 205 206 outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2); 207 208 for (i = 0; i < len; i++) { 209 if (rw == I2C_SMBUS_WRITE) { 210 outb_p(data->block[i + 1], SMB_BLK_DAT); 211 error = ali1563_block_start(a); 212 if (error) 213 break; 214 } else { 215 error = ali1563_block_start(a); 216 if (error) 217 break; 218 if (i == 0) { 219 len = inb_p(SMB_HST_DAT0); 220 if (len < 1) 221 len = 1; 222 else if (len > 32) 223 len = 32; 224 } 225 data->block[i+1] = inb_p(SMB_BLK_DAT); 226 } 227 } 228 /* Do we need this? */ 229 outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1); 230 return error; 231 } 232 233 static s32 ali1563_access(struct i2c_adapter *a, u16 addr, 234 unsigned short flags, char rw, u8 cmd, 235 int size, union i2c_smbus_data *data) 236 { 237 int error = 0; 238 int timeout; 239 u32 reg; 240 241 for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) { 242 reg = inb_p(SMB_HST_STS); 243 if (!(reg & HST_STS_BUSY)) 244 break; 245 } 246 if (!timeout) 247 dev_warn(&a->dev, "SMBus not idle. HST_STS = %02x\n", reg); 248 outb_p(0xff, SMB_HST_STS); 249 250 /* Map the size to what the chip understands */ 251 switch (size) { 252 case I2C_SMBUS_QUICK: 253 size = HST_CNTL2_QUICK; 254 break; 255 case I2C_SMBUS_BYTE: 256 size = HST_CNTL2_BYTE; 257 break; 258 case I2C_SMBUS_BYTE_DATA: 259 size = HST_CNTL2_BYTE_DATA; 260 break; 261 case I2C_SMBUS_WORD_DATA: 262 size = HST_CNTL2_WORD_DATA; 263 break; 264 case I2C_SMBUS_BLOCK_DATA: 265 size = HST_CNTL2_BLOCK; 266 break; 267 default: 268 dev_warn(&a->dev, "Unsupported transaction %d\n", size); 269 error = -EOPNOTSUPP; 270 goto Done; 271 } 272 273 outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD); 274 outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | 275 (size << 3), SMB_HST_CNTL2); 276 277 /* Write the command register */ 278 279 switch (size) { 280 case HST_CNTL2_BYTE: 281 if (rw == I2C_SMBUS_WRITE) 282 /* Beware it uses DAT0 register and not CMD! */ 283 outb_p(cmd, SMB_HST_DAT0); 284 break; 285 case HST_CNTL2_BYTE_DATA: 286 outb_p(cmd, SMB_HST_CMD); 287 if (rw == I2C_SMBUS_WRITE) 288 outb_p(data->byte, SMB_HST_DAT0); 289 break; 290 case HST_CNTL2_WORD_DATA: 291 outb_p(cmd, SMB_HST_CMD); 292 if (rw == I2C_SMBUS_WRITE) { 293 outb_p(data->word & 0xff, SMB_HST_DAT0); 294 outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1); 295 } 296 break; 297 case HST_CNTL2_BLOCK: 298 outb_p(cmd, SMB_HST_CMD); 299 error = ali1563_block(a, data, rw); 300 goto Done; 301 } 302 303 error = ali1563_transaction(a, size); 304 if (error) 305 goto Done; 306 307 if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK)) 308 goto Done; 309 310 switch (size) { 311 case HST_CNTL2_BYTE: /* Result put in SMBHSTDAT0 */ 312 data->byte = inb_p(SMB_HST_DAT0); 313 break; 314 case HST_CNTL2_BYTE_DATA: 315 data->byte = inb_p(SMB_HST_DAT0); 316 break; 317 case HST_CNTL2_WORD_DATA: 318 data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8); 319 break; 320 } 321 Done: 322 return error; 323 } 324 325 static u32 ali1563_func(struct i2c_adapter *a) 326 { 327 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | 328 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | 329 I2C_FUNC_SMBUS_BLOCK_DATA; 330 } 331 332 333 static int ali1563_setup(struct pci_dev *dev) 334 { 335 u16 ctrl; 336 337 pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); 338 339 /* SMB I/O Base in high 12 bits and must be aligned with the 340 * size of the I/O space. */ 341 ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1); 342 if (!ali1563_smba) { 343 dev_warn(&dev->dev, "ali1563_smba Uninitialized\n"); 344 goto Err; 345 } 346 347 /* Check if device is enabled */ 348 if (!(ctrl & ALI1563_SMB_HOSTEN)) { 349 dev_warn(&dev->dev, "Host Controller not enabled\n"); 350 goto Err; 351 } 352 if (!(ctrl & ALI1563_SMB_IOEN)) { 353 dev_warn(&dev->dev, "I/O space not enabled, trying manually\n"); 354 pci_write_config_word(dev, ALI1563_SMBBA, 355 ctrl | ALI1563_SMB_IOEN); 356 pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); 357 if (!(ctrl & ALI1563_SMB_IOEN)) { 358 dev_err(&dev->dev, 359 "I/O space still not enabled, giving up\n"); 360 goto Err; 361 } 362 } 363 364 if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE, 365 ali1563_pci_driver.name)) 366 goto Err; 367 368 if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, 369 ali1563_pci_driver.name)) { 370 dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n", 371 ali1563_smba); 372 goto Err; 373 } 374 dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba); 375 376 return 0; 377 Err: 378 return -ENODEV; 379 } 380 381 static void ali1563_shutdown(struct pci_dev *dev) 382 { 383 release_region(ali1563_smba, ALI1563_SMB_IOSIZE); 384 } 385 386 static const struct i2c_algorithm ali1563_algorithm = { 387 .smbus_xfer = ali1563_access, 388 .functionality = ali1563_func, 389 }; 390 391 static struct i2c_adapter ali1563_adapter = { 392 .owner = THIS_MODULE, 393 .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, 394 .algo = &ali1563_algorithm, 395 }; 396 397 static int ali1563_probe(struct pci_dev *dev, 398 const struct pci_device_id *id_table) 399 { 400 int error; 401 402 error = ali1563_setup(dev); 403 if (error) 404 goto exit; 405 ali1563_adapter.dev.parent = &dev->dev; 406 snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name), 407 "SMBus ALi 1563 Adapter @ %04x", ali1563_smba); 408 error = i2c_add_adapter(&ali1563_adapter); 409 if (error) 410 goto exit_shutdown; 411 return 0; 412 413 exit_shutdown: 414 ali1563_shutdown(dev); 415 exit: 416 dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error); 417 return error; 418 } 419 420 static void ali1563_remove(struct pci_dev *dev) 421 { 422 i2c_del_adapter(&ali1563_adapter); 423 ali1563_shutdown(dev); 424 } 425 426 static const struct pci_device_id ali1563_id_table[] = { 427 { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) }, 428 {}, 429 }; 430 431 MODULE_DEVICE_TABLE(pci, ali1563_id_table); 432 433 static struct pci_driver ali1563_pci_driver = { 434 .name = "ali1563_smbus", 435 .id_table = ali1563_id_table, 436 .probe = ali1563_probe, 437 .remove = ali1563_remove, 438 }; 439 440 module_pci_driver(ali1563_pci_driver); 441 442 MODULE_LICENSE("GPL"); 443