1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Coresight configuration
4#
5menuconfig CORESIGHT
6	bool "CoreSight Tracing Support"
7	depends on ARM || ARM64
8	depends on OF || ACPI
9	select ARM_AMBA
10	select PERF_EVENTS
11	help
12	  This framework provides a kernel interface for the CoreSight debug
13	  and trace drivers to register themselves with. It's intended to build
14	  a topological view of the CoreSight components based on a DT
15	  specification and configure the right series of components when a
16	  trace source gets enabled.
17
18if CORESIGHT
19config CORESIGHT_LINKS_AND_SINKS
20	bool "CoreSight Link and Sink drivers"
21	help
22	  This enables support for CoreSight link and sink drivers that are
23	  responsible for transporting and collecting the trace data
24	  respectively.  Link and sinks are dynamically aggregated with a trace
25	  entity at run time to form a complete trace path.
26
27config CORESIGHT_LINK_AND_SINK_TMC
28	bool "Coresight generic TMC driver"
29	depends on CORESIGHT_LINKS_AND_SINKS
30	help
31	  This enables support for the Trace Memory Controller driver.
32	  Depending on its configuration the device can act as a link (embedded
33	  trace router - ETR) or sink (embedded trace FIFO).  The driver
34	  complies with the generic implementation of the component without
35	  special enhancement or added features.
36
37config CORESIGHT_CATU
38	bool "Coresight Address Translation Unit (CATU) driver"
39	depends on CORESIGHT_LINK_AND_SINK_TMC
40	help
41	   Enable support for the Coresight Address Translation Unit (CATU).
42	   CATU supports a scatter gather table of 4K pages, with forward/backward
43	   lookup. CATU helps TMC ETR to use a large physically non-contiguous trace
44	   buffer by translating the addresses used by ETR to the physical address
45	   by looking up the provided table. CATU can also be used in pass-through
46	   mode where the address is not translated.
47
48config CORESIGHT_SINK_TPIU
49	bool "Coresight generic TPIU driver"
50	depends on CORESIGHT_LINKS_AND_SINKS
51	help
52	  This enables support for the Trace Port Interface Unit driver,
53	  responsible for bridging the gap between the on-chip coresight
54	  components and a trace for bridging the gap between the on-chip
55	  coresight components and a trace port collection engine, typically
56	  connected to an external host for use case capturing more traces than
57	  the on-board coresight memory can handle.
58
59config CORESIGHT_SINK_ETBV10
60	bool "Coresight ETBv1.0 driver"
61	depends on CORESIGHT_LINKS_AND_SINKS
62	help
63	  This enables support for the Embedded Trace Buffer version 1.0 driver
64	  that complies with the generic implementation of the component without
65	  special enhancement or added features.
66
67config CORESIGHT_SOURCE_ETM3X
68	bool "CoreSight Embedded Trace Macrocell 3.x driver"
69	depends on !ARM64
70	select CORESIGHT_LINKS_AND_SINKS
71	help
72	  This driver provides support for processor ETM3.x and PTM1.x modules,
73	  which allows tracing the instructions that a processor is executing
74	  This is primarily useful for instruction level tracing.  Depending
75	  the ETM version data tracing may also be available.
76
77config CORESIGHT_SOURCE_ETM4X
78	bool "CoreSight Embedded Trace Macrocell 4.x driver"
79	depends on ARM64
80	select CORESIGHT_LINKS_AND_SINKS
81	select PID_IN_CONTEXTIDR
82	help
83	  This driver provides support for the ETM4.x tracer module, tracing the
84	  instructions that a processor is executing. This is primarily useful
85	  for instruction level tracing. Depending on the implemented version
86	  data tracing may also be available.
87
88config CORESIGHT_STM
89	bool "CoreSight System Trace Macrocell driver"
90	depends on (ARM && !(CPU_32v3 || CPU_32v4 || CPU_32v4T)) || ARM64
91	select CORESIGHT_LINKS_AND_SINKS
92	select STM
93	help
94	  This driver provides support for hardware assisted software
95	  instrumentation based tracing. This is primarily used for
96	  logging useful software events or data coming from various entities
97	  in the system, possibly running different OSs
98
99config CORESIGHT_CPU_DEBUG
100	tristate "CoreSight CPU Debug driver"
101	depends on ARM || ARM64
102	depends on DEBUG_FS
103	help
104	  This driver provides support for coresight debugging module. This
105	  is primarily used to dump sample-based profiling registers when
106	  system triggers panic, the driver will parse context registers so
107	  can quickly get to know program counter (PC), secure state,
108	  exception level, etc. Before use debugging functionality, platform
109	  needs to ensure the clock domain and power domain are enabled
110	  properly, please refer Documentation/trace/coresight/coresight-cpu-debug.rst
111	  for detailed description and the example for usage.
112
113config CORESIGHT_CTI
114	bool "CoreSight Cross Trigger Interface (CTI) driver"
115	depends on ARM || ARM64
116	help
117	  This driver provides support for CoreSight CTI and CTM components.
118	  These provide hardware triggering events between CoreSight trace
119	  source and sink components. These can be used to halt trace or
120	  inject events into the trace stream. CTI also provides a software
121	  control to trigger the same halt events. This can provide fast trace
122	  halt compared to disabling sources and sinks normally in driver
123	  software.
124
125config CORESIGHT_CTI_INTEGRATION_REGS
126	bool "Access CTI CoreSight Integration Registers"
127	depends on CORESIGHT_CTI
128	help
129	  This option adds support for the CoreSight integration registers on
130	  this device. The integration registers allow the exploration of the
131	  CTI trigger connections between this and other devices.These
132	  registers are not used in normal operation and can leave devices in
133	  an inconsistent state.
134endif
135