1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * OMAP hardware spinlock driver
4  *
5  * Copyright (C) 2010-2021 Texas Instruments Incorporated - https://www.ti.com
6  *
7  * Contact: Simon Que <sque@ti.com>
8  *          Hari Kanigeri <h-kanigeri2@ti.com>
9  *          Ohad Ben-Cohen <ohad@wizery.com>
10  *          Suman Anna <s-anna@ti.com>
11  */
12 
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/device.h>
16 #include <linux/delay.h>
17 #include <linux/io.h>
18 #include <linux/bitops.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/slab.h>
21 #include <linux/spinlock.h>
22 #include <linux/hwspinlock.h>
23 #include <linux/of.h>
24 #include <linux/platform_device.h>
25 
26 #include "hwspinlock_internal.h"
27 
28 /* Spinlock register offsets */
29 #define SYSSTATUS_OFFSET		0x0014
30 #define LOCK_BASE_OFFSET		0x0800
31 
32 #define SPINLOCK_NUMLOCKS_BIT_OFFSET	(24)
33 
34 /* Possible values of SPINLOCK_LOCK_REG */
35 #define SPINLOCK_NOTTAKEN		(0)	/* free */
36 #define SPINLOCK_TAKEN			(1)	/* locked */
37 
38 static int omap_hwspinlock_trylock(struct hwspinlock *lock)
39 {
40 	void __iomem *lock_addr = lock->priv;
41 
42 	/* attempt to acquire the lock by reading its value */
43 	return (SPINLOCK_NOTTAKEN == readl(lock_addr));
44 }
45 
46 static void omap_hwspinlock_unlock(struct hwspinlock *lock)
47 {
48 	void __iomem *lock_addr = lock->priv;
49 
50 	/* release the lock by writing 0 to it */
51 	writel(SPINLOCK_NOTTAKEN, lock_addr);
52 }
53 
54 /*
55  * relax the OMAP interconnect while spinning on it.
56  *
57  * The specs recommended that the retry delay time will be
58  * just over half of the time that a requester would be
59  * expected to hold the lock.
60  *
61  * The number below is taken from an hardware specs example,
62  * obviously it is somewhat arbitrary.
63  */
64 static void omap_hwspinlock_relax(struct hwspinlock *lock)
65 {
66 	ndelay(50);
67 }
68 
69 static const struct hwspinlock_ops omap_hwspinlock_ops = {
70 	.trylock = omap_hwspinlock_trylock,
71 	.unlock = omap_hwspinlock_unlock,
72 	.relax = omap_hwspinlock_relax,
73 };
74 
75 static int omap_hwspinlock_probe(struct platform_device *pdev)
76 {
77 	struct device_node *node = pdev->dev.of_node;
78 	struct hwspinlock_device *bank;
79 	struct hwspinlock *hwlock;
80 	void __iomem *io_base;
81 	int num_locks, i, ret;
82 	/* Only a single hwspinlock block device is supported */
83 	int base_id = 0;
84 
85 	if (!node)
86 		return -ENODEV;
87 
88 	io_base = devm_platform_ioremap_resource(pdev, 0);
89 	if (IS_ERR(io_base))
90 		return PTR_ERR(io_base);
91 
92 	/*
93 	 * make sure the module is enabled and clocked before reading
94 	 * the module SYSSTATUS register
95 	 */
96 	pm_runtime_enable(&pdev->dev);
97 	ret = pm_runtime_resume_and_get(&pdev->dev);
98 	if (ret < 0)
99 		goto runtime_err;
100 
101 	/* Determine number of locks */
102 	i = readl(io_base + SYSSTATUS_OFFSET);
103 	i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET;
104 
105 	/*
106 	 * runtime PM will make sure the clock of this module is
107 	 * enabled again iff at least one lock is requested
108 	 */
109 	ret = pm_runtime_put(&pdev->dev);
110 	if (ret < 0)
111 		goto runtime_err;
112 
113 	/* one of the four lsb's must be set, and nothing else */
114 	if (hweight_long(i & 0xf) != 1 || i > 8) {
115 		ret = -EINVAL;
116 		goto runtime_err;
117 	}
118 
119 	num_locks = i * 32; /* actual number of locks in this device */
120 
121 	bank = devm_kzalloc(&pdev->dev, struct_size(bank, lock, num_locks),
122 			    GFP_KERNEL);
123 	if (!bank) {
124 		ret = -ENOMEM;
125 		goto runtime_err;
126 	}
127 
128 	platform_set_drvdata(pdev, bank);
129 
130 	for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
131 		hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
132 
133 	ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
134 						base_id, num_locks);
135 	if (ret)
136 		goto runtime_err;
137 
138 	dev_dbg(&pdev->dev, "Registered %d locks with HwSpinlock core\n",
139 		num_locks);
140 
141 	return 0;
142 
143 runtime_err:
144 	pm_runtime_disable(&pdev->dev);
145 	return ret;
146 }
147 
148 static int omap_hwspinlock_remove(struct platform_device *pdev)
149 {
150 	struct hwspinlock_device *bank = platform_get_drvdata(pdev);
151 	int ret;
152 
153 	ret = hwspin_lock_unregister(bank);
154 	if (ret) {
155 		dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
156 		return ret;
157 	}
158 
159 	pm_runtime_disable(&pdev->dev);
160 
161 	return 0;
162 }
163 
164 static const struct of_device_id omap_hwspinlock_of_match[] = {
165 	{ .compatible = "ti,omap4-hwspinlock", },
166 	{ .compatible = "ti,am64-hwspinlock", },
167 	{ .compatible = "ti,am654-hwspinlock", },
168 	{ /* end */ },
169 };
170 MODULE_DEVICE_TABLE(of, omap_hwspinlock_of_match);
171 
172 static struct platform_driver omap_hwspinlock_driver = {
173 	.probe		= omap_hwspinlock_probe,
174 	.remove		= omap_hwspinlock_remove,
175 	.driver		= {
176 		.name	= "omap_hwspinlock",
177 		.of_match_table = of_match_ptr(omap_hwspinlock_of_match),
178 	},
179 };
180 
181 static int __init omap_hwspinlock_init(void)
182 {
183 	return platform_driver_register(&omap_hwspinlock_driver);
184 }
185 /* board init code might need to reserve hwspinlocks for predefined purposes */
186 postcore_initcall(omap_hwspinlock_init);
187 
188 static void __exit omap_hwspinlock_exit(void)
189 {
190 	platform_driver_unregister(&omap_hwspinlock_driver);
191 }
192 module_exit(omap_hwspinlock_exit);
193 
194 MODULE_LICENSE("GPL v2");
195 MODULE_DESCRIPTION("Hardware spinlock driver for OMAP");
196 MODULE_AUTHOR("Simon Que <sque@ti.com>");
197 MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>");
198 MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>");
199