1 /* 2 * w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware 3 * monitoring 4 * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org> 5 * 6 * Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made 7 * by Winbond. It reports a single external temperature with a 1 deg 8 * resolution and a 3 deg accuracy. Datasheet can be obtained from 9 * Winbond's website at: 10 * http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf 11 * 12 * Ported to Linux 2.6 by Wolfgang Ziegler <nuppla@gmx.at> and Jean Delvare 13 * <khali@linux-fr.org>. 14 * 15 * Thanks to James Bolt <james@evilpenguin.com> for benchmarking the read 16 * error handling mechanism. 17 * 18 * This program is free software; you can redistribute it and/or modify 19 * it under the terms of the GNU General Public License as published by 20 * the Free Software Foundation; either version 2 of the License, or 21 * (at your option) any later version. 22 * 23 * This program is distributed in the hope that it will be useful, 24 * but WITHOUT ANY WARRANTY; without even the implied warranty of 25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 26 * GNU General Public License for more details. 27 * 28 * You should have received a copy of the GNU General Public License 29 * along with this program; if not, write to the Free Software 30 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 31 */ 32 33 #include <linux/module.h> 34 #include <linux/delay.h> 35 #include <linux/init.h> 36 #include <linux/slab.h> 37 #include <linux/jiffies.h> 38 #include <linux/i2c.h> 39 #include <linux/hwmon.h> 40 #include <linux/hwmon-sysfs.h> 41 #include <linux/err.h> 42 #include <linux/mutex.h> 43 44 /* How many retries on register read error */ 45 #define MAX_RETRIES 5 46 47 /* 48 * Address to scan 49 * Address is fully defined internally and cannot be changed. 50 */ 51 52 static const unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END }; 53 54 /* 55 * The W83L785TS-S registers 56 * Manufacturer ID is 0x5CA3 for Winbond. 57 */ 58 59 #define W83L785TS_REG_MAN_ID1 0x4D 60 #define W83L785TS_REG_MAN_ID2 0x4C 61 #define W83L785TS_REG_CHIP_ID 0x4E 62 #define W83L785TS_REG_CONFIG 0x40 63 #define W83L785TS_REG_TYPE 0x52 64 #define W83L785TS_REG_TEMP 0x27 65 #define W83L785TS_REG_TEMP_OVER 0x53 /* not sure about this one */ 66 67 /* 68 * Conversions 69 * The W83L785TS-S uses signed 8-bit values. 70 */ 71 72 #define TEMP_FROM_REG(val) ((val) * 1000) 73 74 /* 75 * Functions declaration 76 */ 77 78 static int w83l785ts_probe(struct i2c_client *client, 79 const struct i2c_device_id *id); 80 static int w83l785ts_detect(struct i2c_client *client, 81 struct i2c_board_info *info); 82 static int w83l785ts_remove(struct i2c_client *client); 83 static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval); 84 static struct w83l785ts_data *w83l785ts_update_device(struct device *dev); 85 86 /* 87 * Driver data (common to all clients) 88 */ 89 90 static const struct i2c_device_id w83l785ts_id[] = { 91 { "w83l785ts", 0 }, 92 { } 93 }; 94 MODULE_DEVICE_TABLE(i2c, w83l785ts_id); 95 96 static struct i2c_driver w83l785ts_driver = { 97 .class = I2C_CLASS_HWMON, 98 .driver = { 99 .name = "w83l785ts", 100 }, 101 .probe = w83l785ts_probe, 102 .remove = w83l785ts_remove, 103 .id_table = w83l785ts_id, 104 .detect = w83l785ts_detect, 105 .address_list = normal_i2c, 106 }; 107 108 /* 109 * Client data (each client gets its own) 110 */ 111 112 struct w83l785ts_data { 113 struct device *hwmon_dev; 114 struct mutex update_lock; 115 char valid; /* zero until following fields are valid */ 116 unsigned long last_updated; /* in jiffies */ 117 118 /* registers values */ 119 s8 temp[2]; /* 0: input, 1: critical limit */ 120 }; 121 122 /* 123 * Sysfs stuff 124 */ 125 126 static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, 127 char *buf) 128 { 129 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 130 struct w83l785ts_data *data = w83l785ts_update_device(dev); 131 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); 132 } 133 134 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); 135 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1); 136 137 /* 138 * Real code 139 */ 140 141 /* Return 0 if detection is successful, -ENODEV otherwise */ 142 static int w83l785ts_detect(struct i2c_client *client, 143 struct i2c_board_info *info) 144 { 145 struct i2c_adapter *adapter = client->adapter; 146 u16 man_id; 147 u8 chip_id; 148 149 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 150 return -ENODEV; 151 152 /* detection */ 153 if ((w83l785ts_read_value(client, W83L785TS_REG_CONFIG, 0) & 0x80) 154 || (w83l785ts_read_value(client, W83L785TS_REG_TYPE, 0) & 0xFC)) { 155 dev_dbg(&adapter->dev, 156 "W83L785TS-S detection failed at 0x%02x\n", 157 client->addr); 158 return -ENODEV; 159 } 160 161 /* Identification */ 162 man_id = (w83l785ts_read_value(client, W83L785TS_REG_MAN_ID1, 0) << 8) 163 + w83l785ts_read_value(client, W83L785TS_REG_MAN_ID2, 0); 164 chip_id = w83l785ts_read_value(client, W83L785TS_REG_CHIP_ID, 0); 165 166 if (man_id != 0x5CA3 /* Winbond */ 167 || chip_id != 0x70) { /* W83L785TS-S */ 168 dev_dbg(&adapter->dev, 169 "Unsupported chip (man_id=0x%04X, chip_id=0x%02X)\n", 170 man_id, chip_id); 171 return -ENODEV; 172 } 173 174 strlcpy(info->type, "w83l785ts", I2C_NAME_SIZE); 175 176 return 0; 177 } 178 179 static int w83l785ts_probe(struct i2c_client *client, 180 const struct i2c_device_id *id) 181 { 182 struct w83l785ts_data *data; 183 struct device *dev = &client->dev; 184 int err; 185 186 data = devm_kzalloc(dev, sizeof(struct w83l785ts_data), GFP_KERNEL); 187 if (!data) 188 return -ENOMEM; 189 190 i2c_set_clientdata(client, data); 191 data->valid = 0; 192 mutex_init(&data->update_lock); 193 194 /* Default values in case the first read fails (unlikely). */ 195 data->temp[1] = data->temp[0] = 0; 196 197 /* 198 * Initialize the W83L785TS chip 199 * Nothing yet, assume it is already started. 200 */ 201 202 err = device_create_file(dev, &sensor_dev_attr_temp1_input.dev_attr); 203 if (err) 204 return err; 205 206 err = device_create_file(dev, &sensor_dev_attr_temp1_max.dev_attr); 207 if (err) 208 goto exit_remove; 209 210 /* Register sysfs hooks */ 211 data->hwmon_dev = hwmon_device_register(dev); 212 if (IS_ERR(data->hwmon_dev)) { 213 err = PTR_ERR(data->hwmon_dev); 214 goto exit_remove; 215 } 216 217 return 0; 218 219 exit_remove: 220 device_remove_file(dev, &sensor_dev_attr_temp1_input.dev_attr); 221 device_remove_file(dev, &sensor_dev_attr_temp1_max.dev_attr); 222 return err; 223 } 224 225 static int w83l785ts_remove(struct i2c_client *client) 226 { 227 struct w83l785ts_data *data = i2c_get_clientdata(client); 228 229 hwmon_device_unregister(data->hwmon_dev); 230 device_remove_file(&client->dev, 231 &sensor_dev_attr_temp1_input.dev_attr); 232 device_remove_file(&client->dev, 233 &sensor_dev_attr_temp1_max.dev_attr); 234 235 return 0; 236 } 237 238 static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval) 239 { 240 int value, i; 241 struct device *dev; 242 const char *prefix; 243 244 /* 245 * We might be called during detection, at which point the client 246 * isn't yet fully initialized, so we can't use dev_dbg on it 247 */ 248 if (i2c_get_clientdata(client)) { 249 dev = &client->dev; 250 prefix = ""; 251 } else { 252 dev = &client->adapter->dev; 253 prefix = "w83l785ts: "; 254 } 255 256 /* 257 * Frequent read errors have been reported on Asus boards, so we 258 * retry on read errors. If it still fails (unlikely), return the 259 * default value requested by the caller. 260 */ 261 for (i = 1; i <= MAX_RETRIES; i++) { 262 value = i2c_smbus_read_byte_data(client, reg); 263 if (value >= 0) { 264 dev_dbg(dev, "%sRead 0x%02x from register 0x%02x.\n", 265 prefix, value, reg); 266 return value; 267 } 268 dev_dbg(dev, "%sRead failed, will retry in %d.\n", prefix, i); 269 msleep(i); 270 } 271 272 dev_err(dev, "%sCouldn't read value from register 0x%02x.\n", prefix, 273 reg); 274 return defval; 275 } 276 277 static struct w83l785ts_data *w83l785ts_update_device(struct device *dev) 278 { 279 struct i2c_client *client = to_i2c_client(dev); 280 struct w83l785ts_data *data = i2c_get_clientdata(client); 281 282 mutex_lock(&data->update_lock); 283 284 if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) { 285 dev_dbg(&client->dev, "Updating w83l785ts data.\n"); 286 data->temp[0] = w83l785ts_read_value(client, 287 W83L785TS_REG_TEMP, data->temp[0]); 288 data->temp[1] = w83l785ts_read_value(client, 289 W83L785TS_REG_TEMP_OVER, data->temp[1]); 290 291 data->last_updated = jiffies; 292 data->valid = 1; 293 } 294 295 mutex_unlock(&data->update_lock); 296 297 return data; 298 } 299 300 module_i2c_driver(w83l785ts_driver); 301 302 MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); 303 MODULE_DESCRIPTION("W83L785TS-S driver"); 304 MODULE_LICENSE("GPL"); 305