xref: /openbmc/linux/drivers/hwmon/w83627hf.c (revision 6774def6)
1 /*
2  * w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
3  *		monitoring
4  * Copyright (c) 1998 - 2003  Frodo Looijaard <frodol@dds.nl>,
5  *			      Philip Edelbrock <phil@netroedge.com>,
6  *			      and Mark Studebaker <mdsxyz123@yahoo.com>
7  * Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org>
8  * Copyright (c) 2007 - 1012  Jean Delvare <jdelvare@suse.de>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation; either version 2 of the License, or
13  * (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23  */
24 
25 /*
26  * Supports following chips:
27  *
28  * Chip		#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
29  * w83627hf	9	3	2	3	0x20	0x5ca3	no	yes(LPC)
30  * w83627thf	7	3	3	3	0x90	0x5ca3	no	yes(LPC)
31  * w83637hf	7	3	3	3	0x80	0x5ca3	no	yes(LPC)
32  * w83687thf	7	3	3	3	0x90	0x5ca3	no	yes(LPC)
33  * w83697hf	8	2	2	2	0x60	0x5ca3	no	yes(LPC)
34  *
35  * For other winbond chips, and for i2c support in the above chips,
36  * use w83781d.c.
37  *
38  * Note: automatic ("cruise") fan control for 697, 637 & 627thf not
39  * supported yet.
40  */
41 
42 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
43 
44 #include <linux/module.h>
45 #include <linux/init.h>
46 #include <linux/slab.h>
47 #include <linux/jiffies.h>
48 #include <linux/platform_device.h>
49 #include <linux/hwmon.h>
50 #include <linux/hwmon-sysfs.h>
51 #include <linux/hwmon-vid.h>
52 #include <linux/err.h>
53 #include <linux/mutex.h>
54 #include <linux/ioport.h>
55 #include <linux/acpi.h>
56 #include <linux/io.h>
57 #include "lm75.h"
58 
59 static struct platform_device *pdev;
60 
61 #define DRVNAME "w83627hf"
62 enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
63 
64 struct w83627hf_sio_data {
65 	enum chips type;
66 	int sioaddr;
67 };
68 
69 static u8 force_i2c = 0x1f;
70 module_param(force_i2c, byte, 0);
71 MODULE_PARM_DESC(force_i2c,
72 		 "Initialize the i2c address of the sensors");
73 
74 static bool init = 1;
75 module_param(init, bool, 0);
76 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
77 
78 static unsigned short force_id;
79 module_param(force_id, ushort, 0);
80 MODULE_PARM_DESC(force_id, "Override the detected device ID");
81 
82 /* modified from kernel/include/traps.c */
83 #define DEV			0x07 /* Register: Logical device select */
84 
85 /* logical device numbers for superio_select (below) */
86 #define W83627HF_LD_FDC		0x00
87 #define W83627HF_LD_PRT		0x01
88 #define W83627HF_LD_UART1	0x02
89 #define W83627HF_LD_UART2	0x03
90 #define W83627HF_LD_KBC		0x05
91 #define W83627HF_LD_CIR		0x06 /* w83627hf only */
92 #define W83627HF_LD_GAME	0x07
93 #define W83627HF_LD_MIDI	0x07
94 #define W83627HF_LD_GPIO1	0x07
95 #define W83627HF_LD_GPIO5	0x07 /* w83627thf only */
96 #define W83627HF_LD_GPIO2	0x08
97 #define W83627HF_LD_GPIO3	0x09
98 #define W83627HF_LD_GPIO4	0x09 /* w83627thf only */
99 #define W83627HF_LD_ACPI	0x0a
100 #define W83627HF_LD_HWM		0x0b
101 
102 #define DEVID			0x20 /* Register: Device ID */
103 
104 #define W83627THF_GPIO5_EN	0x30 /* w83627thf only */
105 #define W83627THF_GPIO5_IOSR	0xf3 /* w83627thf only */
106 #define W83627THF_GPIO5_DR	0xf4 /* w83627thf only */
107 
108 #define W83687THF_VID_EN	0x29 /* w83687thf only */
109 #define W83687THF_VID_CFG	0xF0 /* w83687thf only */
110 #define W83687THF_VID_DATA	0xF1 /* w83687thf only */
111 
112 static inline void
113 superio_outb(struct w83627hf_sio_data *sio, int reg, int val)
114 {
115 	outb(reg, sio->sioaddr);
116 	outb(val, sio->sioaddr + 1);
117 }
118 
119 static inline int
120 superio_inb(struct w83627hf_sio_data *sio, int reg)
121 {
122 	outb(reg, sio->sioaddr);
123 	return inb(sio->sioaddr + 1);
124 }
125 
126 static inline void
127 superio_select(struct w83627hf_sio_data *sio, int ld)
128 {
129 	outb(DEV, sio->sioaddr);
130 	outb(ld,  sio->sioaddr + 1);
131 }
132 
133 static inline void
134 superio_enter(struct w83627hf_sio_data *sio)
135 {
136 	outb(0x87, sio->sioaddr);
137 	outb(0x87, sio->sioaddr);
138 }
139 
140 static inline void
141 superio_exit(struct w83627hf_sio_data *sio)
142 {
143 	outb(0xAA, sio->sioaddr);
144 }
145 
146 #define W627_DEVID 0x52
147 #define W627THF_DEVID 0x82
148 #define W697_DEVID 0x60
149 #define W637_DEVID 0x70
150 #define W687THF_DEVID 0x85
151 #define WINB_ACT_REG 0x30
152 #define WINB_BASE_REG 0x60
153 /* Constants specified below */
154 
155 /* Alignment of the base address */
156 #define WINB_ALIGNMENT		~7
157 
158 /* Offset & size of I/O region we are interested in */
159 #define WINB_REGION_OFFSET	5
160 #define WINB_REGION_SIZE	2
161 
162 /* Where are the sensors address/data registers relative to the region offset */
163 #define W83781D_ADDR_REG_OFFSET 0
164 #define W83781D_DATA_REG_OFFSET 1
165 
166 /* The W83781D registers */
167 /* The W83782D registers for nr=7,8 are in bank 5 */
168 #define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
169 					   (0x554 + (((nr) - 7) * 2)))
170 #define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
171 					   (0x555 + (((nr) - 7) * 2)))
172 #define W83781D_REG_IN(nr)     ((nr < 7) ? (0x20 + (nr)) : \
173 					   (0x550 + (nr) - 7))
174 
175 /* nr:0-2 for fans:1-3 */
176 #define W83627HF_REG_FAN_MIN(nr)	(0x3b + (nr))
177 #define W83627HF_REG_FAN(nr)		(0x28 + (nr))
178 
179 #define W83627HF_REG_TEMP2_CONFIG 0x152
180 #define W83627HF_REG_TEMP3_CONFIG 0x252
181 /* these are zero-based, unlike config constants above */
182 static const u16 w83627hf_reg_temp[]		= { 0x27, 0x150, 0x250 };
183 static const u16 w83627hf_reg_temp_hyst[]	= { 0x3A, 0x153, 0x253 };
184 static const u16 w83627hf_reg_temp_over[]	= { 0x39, 0x155, 0x255 };
185 
186 #define W83781D_REG_BANK 0x4E
187 
188 #define W83781D_REG_CONFIG 0x40
189 #define W83781D_REG_ALARM1 0x459
190 #define W83781D_REG_ALARM2 0x45A
191 #define W83781D_REG_ALARM3 0x45B
192 
193 #define W83781D_REG_BEEP_CONFIG 0x4D
194 #define W83781D_REG_BEEP_INTS1 0x56
195 #define W83781D_REG_BEEP_INTS2 0x57
196 #define W83781D_REG_BEEP_INTS3 0x453
197 
198 #define W83781D_REG_VID_FANDIV 0x47
199 
200 #define W83781D_REG_CHIPID 0x49
201 #define W83781D_REG_WCHIPID 0x58
202 #define W83781D_REG_CHIPMAN 0x4F
203 #define W83781D_REG_PIN 0x4B
204 
205 #define W83781D_REG_VBAT 0x5D
206 
207 #define W83627HF_REG_PWM1 0x5A
208 #define W83627HF_REG_PWM2 0x5B
209 
210 static const u8 W83627THF_REG_PWM_ENABLE[] = {
211 	0x04,		/* FAN 1 mode */
212 	0x04,		/* FAN 2 mode */
213 	0x12,		/* FAN AUX mode */
214 };
215 static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 };
216 
217 #define W83627THF_REG_PWM1		0x01	/* 697HF/637HF/687THF too */
218 #define W83627THF_REG_PWM2		0x03	/* 697HF/637HF/687THF too */
219 #define W83627THF_REG_PWM3		0x11	/* 637HF/687THF too */
220 
221 #define W83627THF_REG_VRM_OVT_CFG 	0x18	/* 637HF/687THF too */
222 
223 static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
224 static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
225                              W83627THF_REG_PWM3 };
226 #define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
227 				    regpwm_627hf[nr] : regpwm[nr])
228 
229 #define W83627HF_REG_PWM_FREQ		0x5C	/* Only for the 627HF */
230 
231 #define W83637HF_REG_PWM_FREQ1		0x00	/* 697HF/687THF too */
232 #define W83637HF_REG_PWM_FREQ2		0x02	/* 697HF/687THF too */
233 #define W83637HF_REG_PWM_FREQ3		0x10	/* 687THF too */
234 
235 static const u8 W83637HF_REG_PWM_FREQ[] = { W83637HF_REG_PWM_FREQ1,
236 					W83637HF_REG_PWM_FREQ2,
237 					W83637HF_REG_PWM_FREQ3 };
238 
239 #define W83627HF_BASE_PWM_FREQ	46870
240 
241 #define W83781D_REG_I2C_ADDR 0x48
242 #define W83781D_REG_I2C_SUBADDR 0x4A
243 
244 /* Sensor selection */
245 #define W83781D_REG_SCFG1 0x5D
246 static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
247 #define W83781D_REG_SCFG2 0x59
248 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
249 #define W83781D_DEFAULT_BETA 3435
250 
251 /*
252  * Conversions. Limit checking is only done on the TO_REG
253  * variants. Note that you should be a bit careful with which arguments
254  * these macros are called: arguments may be evaluated more than once.
255  * Fixing this is just not worth it.
256  */
257 #define IN_TO_REG(val)  (clamp_val((((val) + 8) / 16), 0, 255))
258 #define IN_FROM_REG(val) ((val) * 16)
259 
260 static inline u8 FAN_TO_REG(long rpm, int div)
261 {
262 	if (rpm == 0)
263 		return 255;
264 	rpm = clamp_val(rpm, 1, 1000000);
265 	return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
266 }
267 
268 #define TEMP_MIN (-128000)
269 #define TEMP_MAX ( 127000)
270 
271 /*
272  * TEMP: 0.001C/bit (-128C to +127C)
273  * REG: 1C/bit, two's complement
274  */
275 static u8 TEMP_TO_REG(long temp)
276 {
277 	int ntemp = clamp_val(temp, TEMP_MIN, TEMP_MAX);
278 	ntemp += (ntemp < 0 ? -500 : 500);
279 	return (u8)(ntemp / 1000);
280 }
281 
282 static int TEMP_FROM_REG(u8 reg)
283 {
284         return (s8)reg * 1000;
285 }
286 
287 #define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
288 
289 #define PWM_TO_REG(val) (clamp_val((val), 0, 255))
290 
291 static inline unsigned long pwm_freq_from_reg_627hf(u8 reg)
292 {
293 	unsigned long freq;
294 	freq = W83627HF_BASE_PWM_FREQ >> reg;
295 	return freq;
296 }
297 static inline u8 pwm_freq_to_reg_627hf(unsigned long val)
298 {
299 	u8 i;
300 	/*
301 	 * Only 5 dividers (1 2 4 8 16)
302 	 * Search for the nearest available frequency
303 	 */
304 	for (i = 0; i < 4; i++) {
305 		if (val > (((W83627HF_BASE_PWM_FREQ >> i) +
306 			    (W83627HF_BASE_PWM_FREQ >> (i+1))) / 2))
307 			break;
308 	}
309 	return i;
310 }
311 
312 static inline unsigned long pwm_freq_from_reg(u8 reg)
313 {
314 	/* Clock bit 8 -> 180 kHz or 24 MHz */
315 	unsigned long clock = (reg & 0x80) ? 180000UL : 24000000UL;
316 
317 	reg &= 0x7f;
318 	/* This should not happen but anyway... */
319 	if (reg == 0)
320 		reg++;
321 	return clock / (reg << 8);
322 }
323 static inline u8 pwm_freq_to_reg(unsigned long val)
324 {
325 	/* Minimum divider value is 0x01 and maximum is 0x7F */
326 	if (val >= 93750)	/* The highest we can do */
327 		return 0x01;
328 	if (val >= 720)	/* Use 24 MHz clock */
329 		return 24000000UL / (val << 8);
330 	if (val < 6)		/* The lowest we can do */
331 		return 0xFF;
332 	else			/* Use 180 kHz clock */
333 		return 0x80 | (180000UL / (val << 8));
334 }
335 
336 #define BEEP_MASK_FROM_REG(val)		((val) & 0xff7fff)
337 #define BEEP_MASK_TO_REG(val)		((val) & 0xff7fff)
338 
339 #define DIV_FROM_REG(val) (1 << (val))
340 
341 static inline u8 DIV_TO_REG(long val)
342 {
343 	int i;
344 	val = clamp_val(val, 1, 128) >> 1;
345 	for (i = 0; i < 7; i++) {
346 		if (val == 0)
347 			break;
348 		val >>= 1;
349 	}
350 	return (u8)i;
351 }
352 
353 /*
354  * For each registered chip, we need to keep some data in memory.
355  * The structure is dynamically allocated.
356  */
357 struct w83627hf_data {
358 	unsigned short addr;
359 	const char *name;
360 	struct device *hwmon_dev;
361 	struct mutex lock;
362 	enum chips type;
363 
364 	struct mutex update_lock;
365 	char valid;		/* !=0 if following fields are valid */
366 	unsigned long last_updated;	/* In jiffies */
367 
368 	u8 in[9];		/* Register value */
369 	u8 in_max[9];		/* Register value */
370 	u8 in_min[9];		/* Register value */
371 	u8 fan[3];		/* Register value */
372 	u8 fan_min[3];		/* Register value */
373 	u16 temp[3];		/* Register value */
374 	u16 temp_max[3];	/* Register value */
375 	u16 temp_max_hyst[3];	/* Register value */
376 	u8 fan_div[3];		/* Register encoding, shifted right */
377 	u8 vid;			/* Register encoding, combined */
378 	u32 alarms;		/* Register encoding, combined */
379 	u32 beep_mask;		/* Register encoding, combined */
380 	u8 pwm[3];		/* Register value */
381 	u8 pwm_enable[3];	/* 1 = manual
382 				 * 2 = thermal cruise (also called SmartFan I)
383 				 * 3 = fan speed cruise
384 				 */
385 	u8 pwm_freq[3];		/* Register value */
386 	u16 sens[3];		/* 1 = pentium diode; 2 = 3904 diode;
387 				 * 4 = thermistor
388 				 */
389 	u8 vrm;
390 	u8 vrm_ovt;		/* Register value, 627THF/637HF/687THF only */
391 
392 #ifdef CONFIG_PM
393 	/* Remember extra register values over suspend/resume */
394 	u8 scfg1;
395 	u8 scfg2;
396 #endif
397 };
398 
399 
400 static int w83627hf_probe(struct platform_device *pdev);
401 static int w83627hf_remove(struct platform_device *pdev);
402 
403 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg);
404 static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value);
405 static void w83627hf_update_fan_div(struct w83627hf_data *data);
406 static struct w83627hf_data *w83627hf_update_device(struct device *dev);
407 static void w83627hf_init_device(struct platform_device *pdev);
408 
409 #ifdef CONFIG_PM
410 static int w83627hf_suspend(struct device *dev)
411 {
412 	struct w83627hf_data *data = w83627hf_update_device(dev);
413 
414 	mutex_lock(&data->update_lock);
415 	data->scfg1 = w83627hf_read_value(data, W83781D_REG_SCFG1);
416 	data->scfg2 = w83627hf_read_value(data, W83781D_REG_SCFG2);
417 	mutex_unlock(&data->update_lock);
418 
419 	return 0;
420 }
421 
422 static int w83627hf_resume(struct device *dev)
423 {
424 	struct w83627hf_data *data = dev_get_drvdata(dev);
425 	int i, num_temps = (data->type == w83697hf) ? 2 : 3;
426 
427 	/* Restore limits */
428 	mutex_lock(&data->update_lock);
429 	for (i = 0; i <= 8; i++) {
430 		/* skip missing sensors */
431 		if (((data->type == w83697hf) && (i == 1)) ||
432 		    ((data->type != w83627hf && data->type != w83697hf)
433 		    && (i == 5 || i == 6)))
434 			continue;
435 		w83627hf_write_value(data, W83781D_REG_IN_MAX(i),
436 				     data->in_max[i]);
437 		w83627hf_write_value(data, W83781D_REG_IN_MIN(i),
438 				     data->in_min[i]);
439 	}
440 	for (i = 0; i <= 2; i++)
441 		w83627hf_write_value(data, W83627HF_REG_FAN_MIN(i),
442 				     data->fan_min[i]);
443 	for (i = 0; i < num_temps; i++) {
444 		w83627hf_write_value(data, w83627hf_reg_temp_over[i],
445 				     data->temp_max[i]);
446 		w83627hf_write_value(data, w83627hf_reg_temp_hyst[i],
447 				     data->temp_max_hyst[i]);
448 	}
449 
450 	/* Fixup BIOS bugs */
451 	if (data->type == w83627thf || data->type == w83637hf ||
452 	    data->type == w83687thf)
453 		w83627hf_write_value(data, W83627THF_REG_VRM_OVT_CFG,
454 				     data->vrm_ovt);
455 	w83627hf_write_value(data, W83781D_REG_SCFG1, data->scfg1);
456 	w83627hf_write_value(data, W83781D_REG_SCFG2, data->scfg2);
457 
458 	/* Force re-reading all values */
459 	data->valid = 0;
460 	mutex_unlock(&data->update_lock);
461 
462 	return 0;
463 }
464 
465 static const struct dev_pm_ops w83627hf_dev_pm_ops = {
466 	.suspend = w83627hf_suspend,
467 	.resume = w83627hf_resume,
468 };
469 
470 #define W83627HF_DEV_PM_OPS	(&w83627hf_dev_pm_ops)
471 #else
472 #define W83627HF_DEV_PM_OPS	NULL
473 #endif /* CONFIG_PM */
474 
475 static struct platform_driver w83627hf_driver = {
476 	.driver = {
477 		.owner	= THIS_MODULE,
478 		.name	= DRVNAME,
479 		.pm	= W83627HF_DEV_PM_OPS,
480 	},
481 	.probe		= w83627hf_probe,
482 	.remove		= w83627hf_remove,
483 };
484 
485 static ssize_t
486 show_in_input(struct device *dev, struct device_attribute *devattr, char *buf)
487 {
488 	int nr = to_sensor_dev_attr(devattr)->index;
489 	struct w83627hf_data *data = w83627hf_update_device(dev);
490 	return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in[nr]));
491 }
492 static ssize_t
493 show_in_min(struct device *dev, struct device_attribute *devattr, char *buf)
494 {
495 	int nr = to_sensor_dev_attr(devattr)->index;
496 	struct w83627hf_data *data = w83627hf_update_device(dev);
497 	return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_min[nr]));
498 }
499 static ssize_t
500 show_in_max(struct device *dev, struct device_attribute *devattr, char *buf)
501 {
502 	int nr = to_sensor_dev_attr(devattr)->index;
503 	struct w83627hf_data *data = w83627hf_update_device(dev);
504 	return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_max[nr]));
505 }
506 static ssize_t
507 store_in_min(struct device *dev, struct device_attribute *devattr,
508 	     const char *buf, size_t count)
509 {
510 	int nr = to_sensor_dev_attr(devattr)->index;
511 	struct w83627hf_data *data = dev_get_drvdata(dev);
512 	long val;
513 	int err;
514 
515 	err = kstrtol(buf, 10, &val);
516 	if (err)
517 		return err;
518 
519 	mutex_lock(&data->update_lock);
520 	data->in_min[nr] = IN_TO_REG(val);
521 	w83627hf_write_value(data, W83781D_REG_IN_MIN(nr), data->in_min[nr]);
522 	mutex_unlock(&data->update_lock);
523 	return count;
524 }
525 static ssize_t
526 store_in_max(struct device *dev, struct device_attribute *devattr,
527 	     const char *buf, size_t count)
528 {
529 	int nr = to_sensor_dev_attr(devattr)->index;
530 	struct w83627hf_data *data = dev_get_drvdata(dev);
531 	long val;
532 	int err;
533 
534 	err = kstrtol(buf, 10, &val);
535 	if (err)
536 		return err;
537 
538 	mutex_lock(&data->update_lock);
539 	data->in_max[nr] = IN_TO_REG(val);
540 	w83627hf_write_value(data, W83781D_REG_IN_MAX(nr), data->in_max[nr]);
541 	mutex_unlock(&data->update_lock);
542 	return count;
543 }
544 #define sysfs_vin_decl(offset) \
545 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO,		\
546 			  show_in_input, NULL, offset);		\
547 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO|S_IWUSR,	\
548 			  show_in_min, store_in_min, offset);	\
549 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO|S_IWUSR,	\
550 			  show_in_max, store_in_max, offset);
551 
552 sysfs_vin_decl(1);
553 sysfs_vin_decl(2);
554 sysfs_vin_decl(3);
555 sysfs_vin_decl(4);
556 sysfs_vin_decl(5);
557 sysfs_vin_decl(6);
558 sysfs_vin_decl(7);
559 sysfs_vin_decl(8);
560 
561 /* use a different set of functions for in0 */
562 static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg)
563 {
564 	long in0;
565 
566 	if ((data->vrm_ovt & 0x01) &&
567 		(w83627thf == data->type || w83637hf == data->type
568 		 || w83687thf == data->type))
569 
570 		/* use VRM9 calculation */
571 		in0 = (long)((reg * 488 + 70000 + 50) / 100);
572 	else
573 		/* use VRM8 (standard) calculation */
574 		in0 = (long)IN_FROM_REG(reg);
575 
576 	return sprintf(buf,"%ld\n", in0);
577 }
578 
579 static ssize_t show_regs_in_0(struct device *dev, struct device_attribute *attr, char *buf)
580 {
581 	struct w83627hf_data *data = w83627hf_update_device(dev);
582 	return show_in_0(data, buf, data->in[0]);
583 }
584 
585 static ssize_t show_regs_in_min0(struct device *dev, struct device_attribute *attr, char *buf)
586 {
587 	struct w83627hf_data *data = w83627hf_update_device(dev);
588 	return show_in_0(data, buf, data->in_min[0]);
589 }
590 
591 static ssize_t show_regs_in_max0(struct device *dev, struct device_attribute *attr, char *buf)
592 {
593 	struct w83627hf_data *data = w83627hf_update_device(dev);
594 	return show_in_0(data, buf, data->in_max[0]);
595 }
596 
597 static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *attr,
598 	const char *buf, size_t count)
599 {
600 	struct w83627hf_data *data = dev_get_drvdata(dev);
601 	unsigned long val;
602 	int err;
603 
604 	err = kstrtoul(buf, 10, &val);
605 	if (err)
606 		return err;
607 
608 	mutex_lock(&data->update_lock);
609 
610 	if ((data->vrm_ovt & 0x01) &&
611 		(w83627thf == data->type || w83637hf == data->type
612 		 || w83687thf == data->type))
613 
614 		/* use VRM9 calculation */
615 		data->in_min[0] =
616 			clamp_val(((val * 100) - 70000 + 244) / 488, 0, 255);
617 	else
618 		/* use VRM8 (standard) calculation */
619 		data->in_min[0] = IN_TO_REG(val);
620 
621 	w83627hf_write_value(data, W83781D_REG_IN_MIN(0), data->in_min[0]);
622 	mutex_unlock(&data->update_lock);
623 	return count;
624 }
625 
626 static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *attr,
627 	const char *buf, size_t count)
628 {
629 	struct w83627hf_data *data = dev_get_drvdata(dev);
630 	unsigned long val;
631 	int err;
632 
633 	err = kstrtoul(buf, 10, &val);
634 	if (err)
635 		return err;
636 
637 	mutex_lock(&data->update_lock);
638 
639 	if ((data->vrm_ovt & 0x01) &&
640 		(w83627thf == data->type || w83637hf == data->type
641 		 || w83687thf == data->type))
642 
643 		/* use VRM9 calculation */
644 		data->in_max[0] =
645 			clamp_val(((val * 100) - 70000 + 244) / 488, 0, 255);
646 	else
647 		/* use VRM8 (standard) calculation */
648 		data->in_max[0] = IN_TO_REG(val);
649 
650 	w83627hf_write_value(data, W83781D_REG_IN_MAX(0), data->in_max[0]);
651 	mutex_unlock(&data->update_lock);
652 	return count;
653 }
654 
655 static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL);
656 static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR,
657 	show_regs_in_min0, store_regs_in_min0);
658 static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR,
659 	show_regs_in_max0, store_regs_in_max0);
660 
661 static ssize_t
662 show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf)
663 {
664 	int nr = to_sensor_dev_attr(devattr)->index;
665 	struct w83627hf_data *data = w83627hf_update_device(dev);
666 	return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan[nr],
667 				(long)DIV_FROM_REG(data->fan_div[nr])));
668 }
669 static ssize_t
670 show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf)
671 {
672 	int nr = to_sensor_dev_attr(devattr)->index;
673 	struct w83627hf_data *data = w83627hf_update_device(dev);
674 	return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan_min[nr],
675 				(long)DIV_FROM_REG(data->fan_div[nr])));
676 }
677 static ssize_t
678 store_fan_min(struct device *dev, struct device_attribute *devattr,
679 	      const char *buf, size_t count)
680 {
681 	int nr = to_sensor_dev_attr(devattr)->index;
682 	struct w83627hf_data *data = dev_get_drvdata(dev);
683 	unsigned long val;
684 	int err;
685 
686 	err = kstrtoul(buf, 10, &val);
687 	if (err)
688 		return err;
689 
690 	mutex_lock(&data->update_lock);
691 	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
692 	w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr),
693 			     data->fan_min[nr]);
694 
695 	mutex_unlock(&data->update_lock);
696 	return count;
697 }
698 #define sysfs_fan_decl(offset)	\
699 static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO,			\
700 			  show_fan_input, NULL, offset - 1);		\
701 static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
702 			  show_fan_min, store_fan_min, offset - 1);
703 
704 sysfs_fan_decl(1);
705 sysfs_fan_decl(2);
706 sysfs_fan_decl(3);
707 
708 static ssize_t
709 show_temp(struct device *dev, struct device_attribute *devattr, char *buf)
710 {
711 	int nr = to_sensor_dev_attr(devattr)->index;
712 	struct w83627hf_data *data = w83627hf_update_device(dev);
713 
714 	u16 tmp = data->temp[nr];
715 	return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
716 					  : (long) TEMP_FROM_REG(tmp));
717 }
718 
719 static ssize_t
720 show_temp_max(struct device *dev, struct device_attribute *devattr,
721 	      char *buf)
722 {
723 	int nr = to_sensor_dev_attr(devattr)->index;
724 	struct w83627hf_data *data = w83627hf_update_device(dev);
725 
726 	u16 tmp = data->temp_max[nr];
727 	return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
728 					  : (long) TEMP_FROM_REG(tmp));
729 }
730 
731 static ssize_t
732 show_temp_max_hyst(struct device *dev, struct device_attribute *devattr,
733 		   char *buf)
734 {
735 	int nr = to_sensor_dev_attr(devattr)->index;
736 	struct w83627hf_data *data = w83627hf_update_device(dev);
737 
738 	u16 tmp = data->temp_max_hyst[nr];
739 	return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
740 					  : (long) TEMP_FROM_REG(tmp));
741 }
742 
743 static ssize_t
744 store_temp_max(struct device *dev, struct device_attribute *devattr,
745 	       const char *buf, size_t count)
746 {
747 	int nr = to_sensor_dev_attr(devattr)->index;
748 	struct w83627hf_data *data = dev_get_drvdata(dev);
749 	u16 tmp;
750 	long val;
751 	int err;
752 
753 	err = kstrtol(buf, 10, &val);
754 	if (err)
755 		return err;
756 
757 	tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
758 	mutex_lock(&data->update_lock);
759 	data->temp_max[nr] = tmp;
760 	w83627hf_write_value(data, w83627hf_reg_temp_over[nr], tmp);
761 	mutex_unlock(&data->update_lock);
762 	return count;
763 }
764 
765 static ssize_t
766 store_temp_max_hyst(struct device *dev, struct device_attribute *devattr,
767 		    const char *buf, size_t count)
768 {
769 	int nr = to_sensor_dev_attr(devattr)->index;
770 	struct w83627hf_data *data = dev_get_drvdata(dev);
771 	u16 tmp;
772 	long val;
773 	int err;
774 
775 	err = kstrtol(buf, 10, &val);
776 	if (err)
777 		return err;
778 
779 	tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
780 	mutex_lock(&data->update_lock);
781 	data->temp_max_hyst[nr] = tmp;
782 	w83627hf_write_value(data, w83627hf_reg_temp_hyst[nr], tmp);
783 	mutex_unlock(&data->update_lock);
784 	return count;
785 }
786 
787 #define sysfs_temp_decl(offset) \
788 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO,		\
789 			  show_temp, NULL, offset - 1);			\
790 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO|S_IWUSR,	 	\
791 			  show_temp_max, store_temp_max, offset - 1);	\
792 static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO|S_IWUSR,	\
793 			  show_temp_max_hyst, store_temp_max_hyst, offset - 1);
794 
795 sysfs_temp_decl(1);
796 sysfs_temp_decl(2);
797 sysfs_temp_decl(3);
798 
799 static ssize_t
800 show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
801 {
802 	struct w83627hf_data *data = w83627hf_update_device(dev);
803 	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
804 }
805 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
806 
807 static ssize_t
808 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
809 {
810 	struct w83627hf_data *data = dev_get_drvdata(dev);
811 	return sprintf(buf, "%ld\n", (long) data->vrm);
812 }
813 static ssize_t
814 store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
815 {
816 	struct w83627hf_data *data = dev_get_drvdata(dev);
817 	unsigned long val;
818 	int err;
819 
820 	err = kstrtoul(buf, 10, &val);
821 	if (err)
822 		return err;
823 
824 	if (val > 255)
825 		return -EINVAL;
826 	data->vrm = val;
827 
828 	return count;
829 }
830 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
831 
832 static ssize_t
833 show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
834 {
835 	struct w83627hf_data *data = w83627hf_update_device(dev);
836 	return sprintf(buf, "%ld\n", (long) data->alarms);
837 }
838 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
839 
840 static ssize_t
841 show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
842 {
843 	struct w83627hf_data *data = w83627hf_update_device(dev);
844 	int bitnr = to_sensor_dev_attr(attr)->index;
845 	return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
846 }
847 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
848 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
849 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
850 static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
851 static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
852 static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
853 static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10);
854 static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16);
855 static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17);
856 static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
857 static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
858 static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
859 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
860 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
861 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13);
862 
863 static ssize_t
864 show_beep_mask(struct device *dev, struct device_attribute *attr, char *buf)
865 {
866 	struct w83627hf_data *data = w83627hf_update_device(dev);
867 	return sprintf(buf, "%ld\n",
868 		      (long)BEEP_MASK_FROM_REG(data->beep_mask));
869 }
870 
871 static ssize_t
872 store_beep_mask(struct device *dev, struct device_attribute *attr,
873 		const char *buf, size_t count)
874 {
875 	struct w83627hf_data *data = dev_get_drvdata(dev);
876 	unsigned long val;
877 	int err;
878 
879 	err = kstrtoul(buf, 10, &val);
880 	if (err)
881 		return err;
882 
883 	mutex_lock(&data->update_lock);
884 
885 	/* preserve beep enable */
886 	data->beep_mask = (data->beep_mask & 0x8000)
887 			| BEEP_MASK_TO_REG(val);
888 	w83627hf_write_value(data, W83781D_REG_BEEP_INTS1,
889 			    data->beep_mask & 0xff);
890 	w83627hf_write_value(data, W83781D_REG_BEEP_INTS3,
891 			    ((data->beep_mask) >> 16) & 0xff);
892 	w83627hf_write_value(data, W83781D_REG_BEEP_INTS2,
893 			    (data->beep_mask >> 8) & 0xff);
894 
895 	mutex_unlock(&data->update_lock);
896 	return count;
897 }
898 
899 static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
900 		   show_beep_mask, store_beep_mask);
901 
902 static ssize_t
903 show_beep(struct device *dev, struct device_attribute *attr, char *buf)
904 {
905 	struct w83627hf_data *data = w83627hf_update_device(dev);
906 	int bitnr = to_sensor_dev_attr(attr)->index;
907 	return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
908 }
909 
910 static ssize_t
911 store_beep(struct device *dev, struct device_attribute *attr,
912 		const char *buf, size_t count)
913 {
914 	struct w83627hf_data *data = dev_get_drvdata(dev);
915 	int bitnr = to_sensor_dev_attr(attr)->index;
916 	u8 reg;
917 	unsigned long bit;
918 	int err;
919 
920 	err = kstrtoul(buf, 10, &bit);
921 	if (err)
922 		return err;
923 
924 	if (bit & ~1)
925 		return -EINVAL;
926 
927 	mutex_lock(&data->update_lock);
928 	if (bit)
929 		data->beep_mask |= (1 << bitnr);
930 	else
931 		data->beep_mask &= ~(1 << bitnr);
932 
933 	if (bitnr < 8) {
934 		reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS1);
935 		if (bit)
936 			reg |= (1 << bitnr);
937 		else
938 			reg &= ~(1 << bitnr);
939 		w83627hf_write_value(data, W83781D_REG_BEEP_INTS1, reg);
940 	} else if (bitnr < 16) {
941 		reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2);
942 		if (bit)
943 			reg |= (1 << (bitnr - 8));
944 		else
945 			reg &= ~(1 << (bitnr - 8));
946 		w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, reg);
947 	} else {
948 		reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS3);
949 		if (bit)
950 			reg |= (1 << (bitnr - 16));
951 		else
952 			reg &= ~(1 << (bitnr - 16));
953 		w83627hf_write_value(data, W83781D_REG_BEEP_INTS3, reg);
954 	}
955 	mutex_unlock(&data->update_lock);
956 
957 	return count;
958 }
959 
960 static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
961 			show_beep, store_beep, 0);
962 static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR,
963 			show_beep, store_beep, 1);
964 static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR,
965 			show_beep, store_beep, 2);
966 static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR,
967 			show_beep, store_beep, 3);
968 static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR,
969 			show_beep, store_beep, 8);
970 static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR,
971 			show_beep, store_beep, 9);
972 static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR,
973 			show_beep, store_beep, 10);
974 static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR,
975 			show_beep, store_beep, 16);
976 static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR,
977 			show_beep, store_beep, 17);
978 static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR,
979 			show_beep, store_beep, 6);
980 static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR,
981 			show_beep, store_beep, 7);
982 static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR,
983 			show_beep, store_beep, 11);
984 static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
985 			show_beep, store_beep, 4);
986 static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
987 			show_beep, store_beep, 5);
988 static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO | S_IWUSR,
989 			show_beep, store_beep, 13);
990 static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
991 			show_beep, store_beep, 15);
992 
993 static ssize_t
994 show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
995 {
996 	int nr = to_sensor_dev_attr(devattr)->index;
997 	struct w83627hf_data *data = w83627hf_update_device(dev);
998 	return sprintf(buf, "%ld\n",
999 		       (long) DIV_FROM_REG(data->fan_div[nr]));
1000 }
1001 /*
1002  * Note: we save and restore the fan minimum here, because its value is
1003  * determined in part by the fan divisor.  This follows the principle of
1004  * least surprise; the user doesn't expect the fan minimum to change just
1005  * because the divisor changed.
1006  */
1007 static ssize_t
1008 store_fan_div(struct device *dev, struct device_attribute *devattr,
1009 	      const char *buf, size_t count)
1010 {
1011 	int nr = to_sensor_dev_attr(devattr)->index;
1012 	struct w83627hf_data *data = dev_get_drvdata(dev);
1013 	unsigned long min;
1014 	u8 reg;
1015 	unsigned long val;
1016 	int err;
1017 
1018 	err = kstrtoul(buf, 10, &val);
1019 	if (err)
1020 		return err;
1021 
1022 	mutex_lock(&data->update_lock);
1023 
1024 	/* Save fan_min */
1025 	min = FAN_FROM_REG(data->fan_min[nr],
1026 			   DIV_FROM_REG(data->fan_div[nr]));
1027 
1028 	data->fan_div[nr] = DIV_TO_REG(val);
1029 
1030 	reg = (w83627hf_read_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
1031 	       & (nr==0 ? 0xcf : 0x3f))
1032 	    | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
1033 	w83627hf_write_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
1034 
1035 	reg = (w83627hf_read_value(data, W83781D_REG_VBAT)
1036 	       & ~(1 << (5 + nr)))
1037 	    | ((data->fan_div[nr] & 0x04) << (3 + nr));
1038 	w83627hf_write_value(data, W83781D_REG_VBAT, reg);
1039 
1040 	/* Restore fan_min */
1041 	data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
1042 	w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr), data->fan_min[nr]);
1043 
1044 	mutex_unlock(&data->update_lock);
1045 	return count;
1046 }
1047 
1048 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO|S_IWUSR,
1049 			  show_fan_div, store_fan_div, 0);
1050 static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO|S_IWUSR,
1051 			  show_fan_div, store_fan_div, 1);
1052 static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO|S_IWUSR,
1053 			  show_fan_div, store_fan_div, 2);
1054 
1055 static ssize_t
1056 show_pwm(struct device *dev, struct device_attribute *devattr, char *buf)
1057 {
1058 	int nr = to_sensor_dev_attr(devattr)->index;
1059 	struct w83627hf_data *data = w83627hf_update_device(dev);
1060 	return sprintf(buf, "%ld\n", (long) data->pwm[nr]);
1061 }
1062 
1063 static ssize_t
1064 store_pwm(struct device *dev, struct device_attribute *devattr,
1065 	  const char *buf, size_t count)
1066 {
1067 	int nr = to_sensor_dev_attr(devattr)->index;
1068 	struct w83627hf_data *data = dev_get_drvdata(dev);
1069 	unsigned long val;
1070 	int err;
1071 
1072 	err = kstrtoul(buf, 10, &val);
1073 	if (err)
1074 		return err;
1075 
1076 	mutex_lock(&data->update_lock);
1077 
1078 	if (data->type == w83627thf) {
1079 		/* bits 0-3 are reserved  in 627THF */
1080 		data->pwm[nr] = PWM_TO_REG(val) & 0xf0;
1081 		w83627hf_write_value(data,
1082 				     W836X7HF_REG_PWM(data->type, nr),
1083 				     data->pwm[nr] |
1084 				     (w83627hf_read_value(data,
1085 				     W836X7HF_REG_PWM(data->type, nr)) & 0x0f));
1086 	} else {
1087 		data->pwm[nr] = PWM_TO_REG(val);
1088 		w83627hf_write_value(data,
1089 				     W836X7HF_REG_PWM(data->type, nr),
1090 				     data->pwm[nr]);
1091 	}
1092 
1093 	mutex_unlock(&data->update_lock);
1094 	return count;
1095 }
1096 
1097 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0);
1098 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1);
1099 static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2);
1100 
1101 static ssize_t
1102 show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf)
1103 {
1104 	int nr = to_sensor_dev_attr(devattr)->index;
1105 	struct w83627hf_data *data = w83627hf_update_device(dev);
1106 	return sprintf(buf, "%d\n", data->pwm_enable[nr]);
1107 }
1108 
1109 static ssize_t
1110 store_pwm_enable(struct device *dev, struct device_attribute *devattr,
1111 	  const char *buf, size_t count)
1112 {
1113 	int nr = to_sensor_dev_attr(devattr)->index;
1114 	struct w83627hf_data *data = dev_get_drvdata(dev);
1115 	u8 reg;
1116 	unsigned long val;
1117 	int err;
1118 
1119 	err = kstrtoul(buf, 10, &val);
1120 	if (err)
1121 		return err;
1122 
1123 	if (!val || val > 3)	/* modes 1, 2 and 3 are supported */
1124 		return -EINVAL;
1125 	mutex_lock(&data->update_lock);
1126 	data->pwm_enable[nr] = val;
1127 	reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]);
1128 	reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]);
1129 	reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr];
1130 	w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg);
1131 	mutex_unlock(&data->update_lock);
1132 	return count;
1133 }
1134 
1135 static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
1136 						  store_pwm_enable, 0);
1137 static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
1138 						  store_pwm_enable, 1);
1139 static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
1140 						  store_pwm_enable, 2);
1141 
1142 static ssize_t
1143 show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf)
1144 {
1145 	int nr = to_sensor_dev_attr(devattr)->index;
1146 	struct w83627hf_data *data = w83627hf_update_device(dev);
1147 	if (data->type == w83627hf)
1148 		return sprintf(buf, "%ld\n",
1149 			pwm_freq_from_reg_627hf(data->pwm_freq[nr]));
1150 	else
1151 		return sprintf(buf, "%ld\n",
1152 			pwm_freq_from_reg(data->pwm_freq[nr]));
1153 }
1154 
1155 static ssize_t
1156 store_pwm_freq(struct device *dev, struct device_attribute *devattr,
1157 	       const char *buf, size_t count)
1158 {
1159 	int nr = to_sensor_dev_attr(devattr)->index;
1160 	struct w83627hf_data *data = dev_get_drvdata(dev);
1161 	static const u8 mask[]={0xF8, 0x8F};
1162 	unsigned long val;
1163 	int err;
1164 
1165 	err = kstrtoul(buf, 10, &val);
1166 	if (err)
1167 		return err;
1168 
1169 	mutex_lock(&data->update_lock);
1170 
1171 	if (data->type == w83627hf) {
1172 		data->pwm_freq[nr] = pwm_freq_to_reg_627hf(val);
1173 		w83627hf_write_value(data, W83627HF_REG_PWM_FREQ,
1174 				(data->pwm_freq[nr] << (nr*4)) |
1175 				(w83627hf_read_value(data,
1176 				W83627HF_REG_PWM_FREQ) & mask[nr]));
1177 	} else {
1178 		data->pwm_freq[nr] = pwm_freq_to_reg(val);
1179 		w83627hf_write_value(data, W83637HF_REG_PWM_FREQ[nr],
1180 				data->pwm_freq[nr]);
1181 	}
1182 
1183 	mutex_unlock(&data->update_lock);
1184 	return count;
1185 }
1186 
1187 static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO|S_IWUSR,
1188 			  show_pwm_freq, store_pwm_freq, 0);
1189 static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO|S_IWUSR,
1190 			  show_pwm_freq, store_pwm_freq, 1);
1191 static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO|S_IWUSR,
1192 			  show_pwm_freq, store_pwm_freq, 2);
1193 
1194 static ssize_t
1195 show_temp_type(struct device *dev, struct device_attribute *devattr,
1196 	       char *buf)
1197 {
1198 	int nr = to_sensor_dev_attr(devattr)->index;
1199 	struct w83627hf_data *data = w83627hf_update_device(dev);
1200 	return sprintf(buf, "%ld\n", (long) data->sens[nr]);
1201 }
1202 
1203 static ssize_t
1204 store_temp_type(struct device *dev, struct device_attribute *devattr,
1205 		const char *buf, size_t count)
1206 {
1207 	int nr = to_sensor_dev_attr(devattr)->index;
1208 	struct w83627hf_data *data = dev_get_drvdata(dev);
1209 	unsigned long val;
1210 	u32 tmp;
1211 	int err;
1212 
1213 	err = kstrtoul(buf, 10, &val);
1214 	if (err)
1215 		return err;
1216 
1217 	mutex_lock(&data->update_lock);
1218 
1219 	switch (val) {
1220 	case 1:		/* PII/Celeron diode */
1221 		tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1222 		w83627hf_write_value(data, W83781D_REG_SCFG1,
1223 				    tmp | BIT_SCFG1[nr]);
1224 		tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
1225 		w83627hf_write_value(data, W83781D_REG_SCFG2,
1226 				    tmp | BIT_SCFG2[nr]);
1227 		data->sens[nr] = val;
1228 		break;
1229 	case 2:		/* 3904 */
1230 		tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1231 		w83627hf_write_value(data, W83781D_REG_SCFG1,
1232 				    tmp | BIT_SCFG1[nr]);
1233 		tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
1234 		w83627hf_write_value(data, W83781D_REG_SCFG2,
1235 				    tmp & ~BIT_SCFG2[nr]);
1236 		data->sens[nr] = val;
1237 		break;
1238 	case W83781D_DEFAULT_BETA:
1239 		dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
1240 			 "instead\n", W83781D_DEFAULT_BETA);
1241 		/* fall through */
1242 	case 4:		/* thermistor */
1243 		tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1244 		w83627hf_write_value(data, W83781D_REG_SCFG1,
1245 				    tmp & ~BIT_SCFG1[nr]);
1246 		data->sens[nr] = val;
1247 		break;
1248 	default:
1249 		dev_err(dev,
1250 		       "Invalid sensor type %ld; must be 1, 2, or 4\n",
1251 		       (long) val);
1252 		break;
1253 	}
1254 
1255 	mutex_unlock(&data->update_lock);
1256 	return count;
1257 }
1258 
1259 #define sysfs_temp_type(offset) \
1260 static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
1261 			  show_temp_type, store_temp_type, offset - 1);
1262 
1263 sysfs_temp_type(1);
1264 sysfs_temp_type(2);
1265 sysfs_temp_type(3);
1266 
1267 static ssize_t
1268 show_name(struct device *dev, struct device_attribute *devattr, char *buf)
1269 {
1270 	struct w83627hf_data *data = dev_get_drvdata(dev);
1271 
1272 	return sprintf(buf, "%s\n", data->name);
1273 }
1274 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
1275 
1276 static int __init w83627hf_find(int sioaddr, unsigned short *addr,
1277 				struct w83627hf_sio_data *sio_data)
1278 {
1279 	int err = -ENODEV;
1280 	u16 val;
1281 
1282 	static __initconst char *const names[] = {
1283 		"W83627HF",
1284 		"W83627THF",
1285 		"W83697HF",
1286 		"W83637HF",
1287 		"W83687THF",
1288 	};
1289 
1290 	sio_data->sioaddr = sioaddr;
1291 	superio_enter(sio_data);
1292 	val = force_id ? force_id : superio_inb(sio_data, DEVID);
1293 	switch (val) {
1294 	case W627_DEVID:
1295 		sio_data->type = w83627hf;
1296 		break;
1297 	case W627THF_DEVID:
1298 		sio_data->type = w83627thf;
1299 		break;
1300 	case W697_DEVID:
1301 		sio_data->type = w83697hf;
1302 		break;
1303 	case W637_DEVID:
1304 		sio_data->type = w83637hf;
1305 		break;
1306 	case W687THF_DEVID:
1307 		sio_data->type = w83687thf;
1308 		break;
1309 	case 0xff:	/* No device at all */
1310 		goto exit;
1311 	default:
1312 		pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%02x)\n", val);
1313 		goto exit;
1314 	}
1315 
1316 	superio_select(sio_data, W83627HF_LD_HWM);
1317 	val = (superio_inb(sio_data, WINB_BASE_REG) << 8) |
1318 	       superio_inb(sio_data, WINB_BASE_REG + 1);
1319 	*addr = val & WINB_ALIGNMENT;
1320 	if (*addr == 0) {
1321 		pr_warn("Base address not set, skipping\n");
1322 		goto exit;
1323 	}
1324 
1325 	val = superio_inb(sio_data, WINB_ACT_REG);
1326 	if (!(val & 0x01)) {
1327 		pr_warn("Enabling HWM logical device\n");
1328 		superio_outb(sio_data, WINB_ACT_REG, val | 0x01);
1329 	}
1330 
1331 	err = 0;
1332 	pr_info(DRVNAME ": Found %s chip at %#x\n",
1333 		names[sio_data->type], *addr);
1334 
1335  exit:
1336 	superio_exit(sio_data);
1337 	return err;
1338 }
1339 
1340 #define VIN_UNIT_ATTRS(_X_)	\
1341 	&sensor_dev_attr_in##_X_##_input.dev_attr.attr,		\
1342 	&sensor_dev_attr_in##_X_##_min.dev_attr.attr,		\
1343 	&sensor_dev_attr_in##_X_##_max.dev_attr.attr,		\
1344 	&sensor_dev_attr_in##_X_##_alarm.dev_attr.attr,		\
1345 	&sensor_dev_attr_in##_X_##_beep.dev_attr.attr
1346 
1347 #define FAN_UNIT_ATTRS(_X_)	\
1348 	&sensor_dev_attr_fan##_X_##_input.dev_attr.attr,	\
1349 	&sensor_dev_attr_fan##_X_##_min.dev_attr.attr,		\
1350 	&sensor_dev_attr_fan##_X_##_div.dev_attr.attr,		\
1351 	&sensor_dev_attr_fan##_X_##_alarm.dev_attr.attr,	\
1352 	&sensor_dev_attr_fan##_X_##_beep.dev_attr.attr
1353 
1354 #define TEMP_UNIT_ATTRS(_X_)	\
1355 	&sensor_dev_attr_temp##_X_##_input.dev_attr.attr,	\
1356 	&sensor_dev_attr_temp##_X_##_max.dev_attr.attr,		\
1357 	&sensor_dev_attr_temp##_X_##_max_hyst.dev_attr.attr,	\
1358 	&sensor_dev_attr_temp##_X_##_type.dev_attr.attr,	\
1359 	&sensor_dev_attr_temp##_X_##_alarm.dev_attr.attr,	\
1360 	&sensor_dev_attr_temp##_X_##_beep.dev_attr.attr
1361 
1362 static struct attribute *w83627hf_attributes[] = {
1363 	&dev_attr_in0_input.attr,
1364 	&dev_attr_in0_min.attr,
1365 	&dev_attr_in0_max.attr,
1366 	&sensor_dev_attr_in0_alarm.dev_attr.attr,
1367 	&sensor_dev_attr_in0_beep.dev_attr.attr,
1368 	VIN_UNIT_ATTRS(2),
1369 	VIN_UNIT_ATTRS(3),
1370 	VIN_UNIT_ATTRS(4),
1371 	VIN_UNIT_ATTRS(7),
1372 	VIN_UNIT_ATTRS(8),
1373 
1374 	FAN_UNIT_ATTRS(1),
1375 	FAN_UNIT_ATTRS(2),
1376 
1377 	TEMP_UNIT_ATTRS(1),
1378 	TEMP_UNIT_ATTRS(2),
1379 
1380 	&dev_attr_alarms.attr,
1381 	&sensor_dev_attr_beep_enable.dev_attr.attr,
1382 	&dev_attr_beep_mask.attr,
1383 
1384 	&sensor_dev_attr_pwm1.dev_attr.attr,
1385 	&sensor_dev_attr_pwm2.dev_attr.attr,
1386 	&dev_attr_name.attr,
1387 	NULL
1388 };
1389 
1390 static const struct attribute_group w83627hf_group = {
1391 	.attrs = w83627hf_attributes,
1392 };
1393 
1394 static struct attribute *w83627hf_attributes_opt[] = {
1395 	VIN_UNIT_ATTRS(1),
1396 	VIN_UNIT_ATTRS(5),
1397 	VIN_UNIT_ATTRS(6),
1398 
1399 	FAN_UNIT_ATTRS(3),
1400 	TEMP_UNIT_ATTRS(3),
1401 	&sensor_dev_attr_pwm3.dev_attr.attr,
1402 
1403 	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
1404 	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
1405 	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
1406 
1407 	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
1408 	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
1409 	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
1410 
1411 	NULL
1412 };
1413 
1414 static const struct attribute_group w83627hf_group_opt = {
1415 	.attrs = w83627hf_attributes_opt,
1416 };
1417 
1418 static int w83627hf_probe(struct platform_device *pdev)
1419 {
1420 	struct device *dev = &pdev->dev;
1421 	struct w83627hf_sio_data *sio_data = dev_get_platdata(dev);
1422 	struct w83627hf_data *data;
1423 	struct resource *res;
1424 	int err, i;
1425 
1426 	static const char *names[] = {
1427 		"w83627hf",
1428 		"w83627thf",
1429 		"w83697hf",
1430 		"w83637hf",
1431 		"w83687thf",
1432 	};
1433 
1434 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1435 	if (!devm_request_region(dev, res->start, WINB_REGION_SIZE, DRVNAME)) {
1436 		dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
1437 			(unsigned long)res->start,
1438 			(unsigned long)(res->start + WINB_REGION_SIZE - 1));
1439 		return -EBUSY;
1440 	}
1441 
1442 	data = devm_kzalloc(dev, sizeof(struct w83627hf_data), GFP_KERNEL);
1443 	if (!data)
1444 		return -ENOMEM;
1445 
1446 	data->addr = res->start;
1447 	data->type = sio_data->type;
1448 	data->name = names[sio_data->type];
1449 	mutex_init(&data->lock);
1450 	mutex_init(&data->update_lock);
1451 	platform_set_drvdata(pdev, data);
1452 
1453 	/* Initialize the chip */
1454 	w83627hf_init_device(pdev);
1455 
1456 	/* A few vars need to be filled upon startup */
1457 	for (i = 0; i <= 2; i++)
1458 		data->fan_min[i] = w83627hf_read_value(
1459 					data, W83627HF_REG_FAN_MIN(i));
1460 	w83627hf_update_fan_div(data);
1461 
1462 	/* Register common device attributes */
1463 	err = sysfs_create_group(&dev->kobj, &w83627hf_group);
1464 	if (err)
1465 		return err;
1466 
1467 	/* Register chip-specific device attributes */
1468 	if (data->type == w83627hf || data->type == w83697hf)
1469 		if ((err = device_create_file(dev,
1470 				&sensor_dev_attr_in5_input.dev_attr))
1471 		 || (err = device_create_file(dev,
1472 				&sensor_dev_attr_in5_min.dev_attr))
1473 		 || (err = device_create_file(dev,
1474 				&sensor_dev_attr_in5_max.dev_attr))
1475 		 || (err = device_create_file(dev,
1476 				&sensor_dev_attr_in5_alarm.dev_attr))
1477 		 || (err = device_create_file(dev,
1478 				&sensor_dev_attr_in5_beep.dev_attr))
1479 		 || (err = device_create_file(dev,
1480 				&sensor_dev_attr_in6_input.dev_attr))
1481 		 || (err = device_create_file(dev,
1482 				&sensor_dev_attr_in6_min.dev_attr))
1483 		 || (err = device_create_file(dev,
1484 				&sensor_dev_attr_in6_max.dev_attr))
1485 		 || (err = device_create_file(dev,
1486 				&sensor_dev_attr_in6_alarm.dev_attr))
1487 		 || (err = device_create_file(dev,
1488 				&sensor_dev_attr_in6_beep.dev_attr))
1489 		 || (err = device_create_file(dev,
1490 				&sensor_dev_attr_pwm1_freq.dev_attr))
1491 		 || (err = device_create_file(dev,
1492 				&sensor_dev_attr_pwm2_freq.dev_attr)))
1493 			goto error;
1494 
1495 	if (data->type != w83697hf)
1496 		if ((err = device_create_file(dev,
1497 				&sensor_dev_attr_in1_input.dev_attr))
1498 		 || (err = device_create_file(dev,
1499 				&sensor_dev_attr_in1_min.dev_attr))
1500 		 || (err = device_create_file(dev,
1501 				&sensor_dev_attr_in1_max.dev_attr))
1502 		 || (err = device_create_file(dev,
1503 				&sensor_dev_attr_in1_alarm.dev_attr))
1504 		 || (err = device_create_file(dev,
1505 				&sensor_dev_attr_in1_beep.dev_attr))
1506 		 || (err = device_create_file(dev,
1507 				&sensor_dev_attr_fan3_input.dev_attr))
1508 		 || (err = device_create_file(dev,
1509 				&sensor_dev_attr_fan3_min.dev_attr))
1510 		 || (err = device_create_file(dev,
1511 				&sensor_dev_attr_fan3_div.dev_attr))
1512 		 || (err = device_create_file(dev,
1513 				&sensor_dev_attr_fan3_alarm.dev_attr))
1514 		 || (err = device_create_file(dev,
1515 				&sensor_dev_attr_fan3_beep.dev_attr))
1516 		 || (err = device_create_file(dev,
1517 				&sensor_dev_attr_temp3_input.dev_attr))
1518 		 || (err = device_create_file(dev,
1519 				&sensor_dev_attr_temp3_max.dev_attr))
1520 		 || (err = device_create_file(dev,
1521 				&sensor_dev_attr_temp3_max_hyst.dev_attr))
1522 		 || (err = device_create_file(dev,
1523 				&sensor_dev_attr_temp3_alarm.dev_attr))
1524 		 || (err = device_create_file(dev,
1525 				&sensor_dev_attr_temp3_beep.dev_attr))
1526 		 || (err = device_create_file(dev,
1527 				&sensor_dev_attr_temp3_type.dev_attr)))
1528 			goto error;
1529 
1530 	if (data->type != w83697hf && data->vid != 0xff) {
1531 		/* Convert VID to voltage based on VRM */
1532 		data->vrm = vid_which_vrm();
1533 
1534 		if ((err = device_create_file(dev, &dev_attr_cpu0_vid))
1535 		 || (err = device_create_file(dev, &dev_attr_vrm)))
1536 			goto error;
1537 	}
1538 
1539 	if (data->type == w83627thf || data->type == w83637hf
1540 	    || data->type == w83687thf) {
1541 		err = device_create_file(dev, &sensor_dev_attr_pwm3.dev_attr);
1542 		if (err)
1543 			goto error;
1544 	}
1545 
1546 	if (data->type == w83637hf || data->type == w83687thf)
1547 		if ((err = device_create_file(dev,
1548 				&sensor_dev_attr_pwm1_freq.dev_attr))
1549 		 || (err = device_create_file(dev,
1550 				&sensor_dev_attr_pwm2_freq.dev_attr))
1551 		 || (err = device_create_file(dev,
1552 				&sensor_dev_attr_pwm3_freq.dev_attr)))
1553 			goto error;
1554 
1555 	if (data->type != w83627hf)
1556 		if ((err = device_create_file(dev,
1557 				&sensor_dev_attr_pwm1_enable.dev_attr))
1558 		 || (err = device_create_file(dev,
1559 				&sensor_dev_attr_pwm2_enable.dev_attr)))
1560 			goto error;
1561 
1562 	if (data->type == w83627thf || data->type == w83637hf
1563 	    || data->type == w83687thf) {
1564 		err = device_create_file(dev,
1565 					 &sensor_dev_attr_pwm3_enable.dev_attr);
1566 		if (err)
1567 			goto error;
1568 	}
1569 
1570 	data->hwmon_dev = hwmon_device_register(dev);
1571 	if (IS_ERR(data->hwmon_dev)) {
1572 		err = PTR_ERR(data->hwmon_dev);
1573 		goto error;
1574 	}
1575 
1576 	return 0;
1577 
1578  error:
1579 	sysfs_remove_group(&dev->kobj, &w83627hf_group);
1580 	sysfs_remove_group(&dev->kobj, &w83627hf_group_opt);
1581 	return err;
1582 }
1583 
1584 static int w83627hf_remove(struct platform_device *pdev)
1585 {
1586 	struct w83627hf_data *data = platform_get_drvdata(pdev);
1587 
1588 	hwmon_device_unregister(data->hwmon_dev);
1589 
1590 	sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group);
1591 	sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group_opt);
1592 
1593 	return 0;
1594 }
1595 
1596 
1597 /* Registers 0x50-0x5f are banked */
1598 static inline void w83627hf_set_bank(struct w83627hf_data *data, u16 reg)
1599 {
1600 	if ((reg & 0x00f0) == 0x50) {
1601 		outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
1602 		outb_p(reg >> 8, data->addr + W83781D_DATA_REG_OFFSET);
1603 	}
1604 }
1605 
1606 /* Not strictly necessary, but play it safe for now */
1607 static inline void w83627hf_reset_bank(struct w83627hf_data *data, u16 reg)
1608 {
1609 	if (reg & 0xff00) {
1610 		outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
1611 		outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
1612 	}
1613 }
1614 
1615 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
1616 {
1617 	int res, word_sized;
1618 
1619 	mutex_lock(&data->lock);
1620 	word_sized = (((reg & 0xff00) == 0x100)
1621 		   || ((reg & 0xff00) == 0x200))
1622 		  && (((reg & 0x00ff) == 0x50)
1623 		   || ((reg & 0x00ff) == 0x53)
1624 		   || ((reg & 0x00ff) == 0x55));
1625 	w83627hf_set_bank(data, reg);
1626 	outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
1627 	res = inb_p(data->addr + W83781D_DATA_REG_OFFSET);
1628 	if (word_sized) {
1629 		outb_p((reg & 0xff) + 1,
1630 		       data->addr + W83781D_ADDR_REG_OFFSET);
1631 		res =
1632 		    (res << 8) + inb_p(data->addr +
1633 				       W83781D_DATA_REG_OFFSET);
1634 	}
1635 	w83627hf_reset_bank(data, reg);
1636 	mutex_unlock(&data->lock);
1637 	return res;
1638 }
1639 
1640 static int w83627thf_read_gpio5(struct platform_device *pdev)
1641 {
1642 	struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
1643 	int res = 0xff, sel;
1644 
1645 	superio_enter(sio_data);
1646 	superio_select(sio_data, W83627HF_LD_GPIO5);
1647 
1648 	/* Make sure these GPIO pins are enabled */
1649 	if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) {
1650 		dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n");
1651 		goto exit;
1652 	}
1653 
1654 	/*
1655 	 * Make sure the pins are configured for input
1656 	 * There must be at least five (VRM 9), and possibly 6 (VRM 10)
1657 	 */
1658 	sel = superio_inb(sio_data, W83627THF_GPIO5_IOSR) & 0x3f;
1659 	if ((sel & 0x1f) != 0x1f) {
1660 		dev_dbg(&pdev->dev, "GPIO5 not configured for VID "
1661 			"function\n");
1662 		goto exit;
1663 	}
1664 
1665 	dev_info(&pdev->dev, "Reading VID from GPIO5\n");
1666 	res = superio_inb(sio_data, W83627THF_GPIO5_DR) & sel;
1667 
1668 exit:
1669 	superio_exit(sio_data);
1670 	return res;
1671 }
1672 
1673 static int w83687thf_read_vid(struct platform_device *pdev)
1674 {
1675 	struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
1676 	int res = 0xff;
1677 
1678 	superio_enter(sio_data);
1679 	superio_select(sio_data, W83627HF_LD_HWM);
1680 
1681 	/* Make sure these GPIO pins are enabled */
1682 	if (!(superio_inb(sio_data, W83687THF_VID_EN) & (1 << 2))) {
1683 		dev_dbg(&pdev->dev, "VID disabled, no VID function\n");
1684 		goto exit;
1685 	}
1686 
1687 	/* Make sure the pins are configured for input */
1688 	if (!(superio_inb(sio_data, W83687THF_VID_CFG) & (1 << 4))) {
1689 		dev_dbg(&pdev->dev, "VID configured as output, "
1690 			"no VID function\n");
1691 		goto exit;
1692 	}
1693 
1694 	res = superio_inb(sio_data, W83687THF_VID_DATA) & 0x3f;
1695 
1696 exit:
1697 	superio_exit(sio_data);
1698 	return res;
1699 }
1700 
1701 static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value)
1702 {
1703 	int word_sized;
1704 
1705 	mutex_lock(&data->lock);
1706 	word_sized = (((reg & 0xff00) == 0x100)
1707 		   || ((reg & 0xff00) == 0x200))
1708 		  && (((reg & 0x00ff) == 0x53)
1709 		   || ((reg & 0x00ff) == 0x55));
1710 	w83627hf_set_bank(data, reg);
1711 	outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
1712 	if (word_sized) {
1713 		outb_p(value >> 8,
1714 		       data->addr + W83781D_DATA_REG_OFFSET);
1715 		outb_p((reg & 0xff) + 1,
1716 		       data->addr + W83781D_ADDR_REG_OFFSET);
1717 	}
1718 	outb_p(value & 0xff,
1719 	       data->addr + W83781D_DATA_REG_OFFSET);
1720 	w83627hf_reset_bank(data, reg);
1721 	mutex_unlock(&data->lock);
1722 	return 0;
1723 }
1724 
1725 static void w83627hf_init_device(struct platform_device *pdev)
1726 {
1727 	struct w83627hf_data *data = platform_get_drvdata(pdev);
1728 	int i;
1729 	enum chips type = data->type;
1730 	u8 tmp;
1731 
1732 	/* Minimize conflicts with other winbond i2c-only clients...  */
1733 	/* disable i2c subclients... how to disable main i2c client?? */
1734 	/* force i2c address to relatively uncommon address */
1735 	if (type == w83627hf) {
1736 		w83627hf_write_value(data, W83781D_REG_I2C_SUBADDR, 0x89);
1737 		w83627hf_write_value(data, W83781D_REG_I2C_ADDR, force_i2c);
1738 	}
1739 
1740 	/* Read VID only once */
1741 	if (type == w83627hf || type == w83637hf) {
1742 		int lo = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
1743 		int hi = w83627hf_read_value(data, W83781D_REG_CHIPID);
1744 		data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
1745 	} else if (type == w83627thf) {
1746 		data->vid = w83627thf_read_gpio5(pdev);
1747 	} else if (type == w83687thf) {
1748 		data->vid = w83687thf_read_vid(pdev);
1749 	}
1750 
1751 	/* Read VRM & OVT Config only once */
1752 	if (type == w83627thf || type == w83637hf || type == w83687thf) {
1753 		data->vrm_ovt =
1754 			w83627hf_read_value(data, W83627THF_REG_VRM_OVT_CFG);
1755 	}
1756 
1757 	tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1758 	for (i = 1; i <= 3; i++) {
1759 		if (!(tmp & BIT_SCFG1[i - 1])) {
1760 			data->sens[i - 1] = 4;
1761 		} else {
1762 			if (w83627hf_read_value
1763 			    (data,
1764 			     W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1765 				data->sens[i - 1] = 1;
1766 			else
1767 				data->sens[i - 1] = 2;
1768 		}
1769 		if ((type == w83697hf) && (i == 2))
1770 			break;
1771 	}
1772 
1773 	if(init) {
1774 		/* Enable temp2 */
1775 		tmp = w83627hf_read_value(data, W83627HF_REG_TEMP2_CONFIG);
1776 		if (tmp & 0x01) {
1777 			dev_warn(&pdev->dev, "Enabling temp2, readings "
1778 				 "might not make sense\n");
1779 			w83627hf_write_value(data, W83627HF_REG_TEMP2_CONFIG,
1780 				tmp & 0xfe);
1781 		}
1782 
1783 		/* Enable temp3 */
1784 		if (type != w83697hf) {
1785 			tmp = w83627hf_read_value(data,
1786 				W83627HF_REG_TEMP3_CONFIG);
1787 			if (tmp & 0x01) {
1788 				dev_warn(&pdev->dev, "Enabling temp3, "
1789 					 "readings might not make sense\n");
1790 				w83627hf_write_value(data,
1791 					W83627HF_REG_TEMP3_CONFIG, tmp & 0xfe);
1792 			}
1793 		}
1794 	}
1795 
1796 	/* Start monitoring */
1797 	w83627hf_write_value(data, W83781D_REG_CONFIG,
1798 			    (w83627hf_read_value(data,
1799 						W83781D_REG_CONFIG) & 0xf7)
1800 			    | 0x01);
1801 
1802 	/* Enable VBAT monitoring if needed */
1803 	tmp = w83627hf_read_value(data, W83781D_REG_VBAT);
1804 	if (!(tmp & 0x01))
1805 		w83627hf_write_value(data, W83781D_REG_VBAT, tmp | 0x01);
1806 }
1807 
1808 static void w83627hf_update_fan_div(struct w83627hf_data *data)
1809 {
1810 	int reg;
1811 
1812 	reg = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
1813 	data->fan_div[0] = (reg >> 4) & 0x03;
1814 	data->fan_div[1] = (reg >> 6) & 0x03;
1815 	if (data->type != w83697hf) {
1816 		data->fan_div[2] = (w83627hf_read_value(data,
1817 				       W83781D_REG_PIN) >> 6) & 0x03;
1818 	}
1819 	reg = w83627hf_read_value(data, W83781D_REG_VBAT);
1820 	data->fan_div[0] |= (reg >> 3) & 0x04;
1821 	data->fan_div[1] |= (reg >> 4) & 0x04;
1822 	if (data->type != w83697hf)
1823 		data->fan_div[2] |= (reg >> 5) & 0x04;
1824 }
1825 
1826 static struct w83627hf_data *w83627hf_update_device(struct device *dev)
1827 {
1828 	struct w83627hf_data *data = dev_get_drvdata(dev);
1829 	int i, num_temps = (data->type == w83697hf) ? 2 : 3;
1830 	int num_pwms = (data->type == w83697hf) ? 2 : 3;
1831 
1832 	mutex_lock(&data->update_lock);
1833 
1834 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1835 	    || !data->valid) {
1836 		for (i = 0; i <= 8; i++) {
1837 			/* skip missing sensors */
1838 			if (((data->type == w83697hf) && (i == 1)) ||
1839 			    ((data->type != w83627hf && data->type != w83697hf)
1840 			    && (i == 5 || i == 6)))
1841 				continue;
1842 			data->in[i] =
1843 			    w83627hf_read_value(data, W83781D_REG_IN(i));
1844 			data->in_min[i] =
1845 			    w83627hf_read_value(data,
1846 					       W83781D_REG_IN_MIN(i));
1847 			data->in_max[i] =
1848 			    w83627hf_read_value(data,
1849 					       W83781D_REG_IN_MAX(i));
1850 		}
1851 		for (i = 0; i <= 2; i++) {
1852 			data->fan[i] =
1853 			    w83627hf_read_value(data, W83627HF_REG_FAN(i));
1854 			data->fan_min[i] =
1855 			    w83627hf_read_value(data,
1856 					       W83627HF_REG_FAN_MIN(i));
1857 		}
1858 		for (i = 0; i <= 2; i++) {
1859 			u8 tmp = w83627hf_read_value(data,
1860 				W836X7HF_REG_PWM(data->type, i));
1861  			/* bits 0-3 are reserved  in 627THF */
1862  			if (data->type == w83627thf)
1863 				tmp &= 0xf0;
1864 			data->pwm[i] = tmp;
1865 			if (i == 1 &&
1866 			    (data->type == w83627hf || data->type == w83697hf))
1867 				break;
1868 		}
1869 		if (data->type == w83627hf) {
1870 				u8 tmp = w83627hf_read_value(data,
1871 						W83627HF_REG_PWM_FREQ);
1872 				data->pwm_freq[0] = tmp & 0x07;
1873 				data->pwm_freq[1] = (tmp >> 4) & 0x07;
1874 		} else if (data->type != w83627thf) {
1875 			for (i = 1; i <= 3; i++) {
1876 				data->pwm_freq[i - 1] =
1877 					w83627hf_read_value(data,
1878 						W83637HF_REG_PWM_FREQ[i - 1]);
1879 				if (i == 2 && (data->type == w83697hf))
1880 					break;
1881 			}
1882 		}
1883 		if (data->type != w83627hf) {
1884 			for (i = 0; i < num_pwms; i++) {
1885 				u8 tmp = w83627hf_read_value(data,
1886 					W83627THF_REG_PWM_ENABLE[i]);
1887 				data->pwm_enable[i] =
1888 					((tmp >> W83627THF_PWM_ENABLE_SHIFT[i])
1889 					& 0x03) + 1;
1890 			}
1891 		}
1892 		for (i = 0; i < num_temps; i++) {
1893 			data->temp[i] = w83627hf_read_value(
1894 						data, w83627hf_reg_temp[i]);
1895 			data->temp_max[i] = w83627hf_read_value(
1896 						data, w83627hf_reg_temp_over[i]);
1897 			data->temp_max_hyst[i] = w83627hf_read_value(
1898 						data, w83627hf_reg_temp_hyst[i]);
1899 		}
1900 
1901 		w83627hf_update_fan_div(data);
1902 
1903 		data->alarms =
1904 		    w83627hf_read_value(data, W83781D_REG_ALARM1) |
1905 		    (w83627hf_read_value(data, W83781D_REG_ALARM2) << 8) |
1906 		    (w83627hf_read_value(data, W83781D_REG_ALARM3) << 16);
1907 		i = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2);
1908 		data->beep_mask = (i << 8) |
1909 		    w83627hf_read_value(data, W83781D_REG_BEEP_INTS1) |
1910 		    w83627hf_read_value(data, W83781D_REG_BEEP_INTS3) << 16;
1911 		data->last_updated = jiffies;
1912 		data->valid = 1;
1913 	}
1914 
1915 	mutex_unlock(&data->update_lock);
1916 
1917 	return data;
1918 }
1919 
1920 static int __init w83627hf_device_add(unsigned short address,
1921 				      const struct w83627hf_sio_data *sio_data)
1922 {
1923 	struct resource res = {
1924 		.start	= address + WINB_REGION_OFFSET,
1925 		.end	= address + WINB_REGION_OFFSET + WINB_REGION_SIZE - 1,
1926 		.name	= DRVNAME,
1927 		.flags	= IORESOURCE_IO,
1928 	};
1929 	int err;
1930 
1931 	err = acpi_check_resource_conflict(&res);
1932 	if (err)
1933 		goto exit;
1934 
1935 	pdev = platform_device_alloc(DRVNAME, address);
1936 	if (!pdev) {
1937 		err = -ENOMEM;
1938 		pr_err("Device allocation failed\n");
1939 		goto exit;
1940 	}
1941 
1942 	err = platform_device_add_resources(pdev, &res, 1);
1943 	if (err) {
1944 		pr_err("Device resource addition failed (%d)\n", err);
1945 		goto exit_device_put;
1946 	}
1947 
1948 	err = platform_device_add_data(pdev, sio_data,
1949 				       sizeof(struct w83627hf_sio_data));
1950 	if (err) {
1951 		pr_err("Platform data allocation failed\n");
1952 		goto exit_device_put;
1953 	}
1954 
1955 	err = platform_device_add(pdev);
1956 	if (err) {
1957 		pr_err("Device addition failed (%d)\n", err);
1958 		goto exit_device_put;
1959 	}
1960 
1961 	return 0;
1962 
1963 exit_device_put:
1964 	platform_device_put(pdev);
1965 exit:
1966 	return err;
1967 }
1968 
1969 static int __init sensors_w83627hf_init(void)
1970 {
1971 	int err;
1972 	unsigned short address;
1973 	struct w83627hf_sio_data sio_data;
1974 
1975 	if (w83627hf_find(0x2e, &address, &sio_data)
1976 	 && w83627hf_find(0x4e, &address, &sio_data))
1977 		return -ENODEV;
1978 
1979 	err = platform_driver_register(&w83627hf_driver);
1980 	if (err)
1981 		goto exit;
1982 
1983 	/* Sets global pdev as a side effect */
1984 	err = w83627hf_device_add(address, &sio_data);
1985 	if (err)
1986 		goto exit_driver;
1987 
1988 	return 0;
1989 
1990 exit_driver:
1991 	platform_driver_unregister(&w83627hf_driver);
1992 exit:
1993 	return err;
1994 }
1995 
1996 static void __exit sensors_w83627hf_exit(void)
1997 {
1998 	platform_device_unregister(pdev);
1999 	platform_driver_unregister(&w83627hf_driver);
2000 }
2001 
2002 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
2003 	      "Philip Edelbrock <phil@netroedge.com>, "
2004 	      "and Mark Studebaker <mdsxyz123@yahoo.com>");
2005 MODULE_DESCRIPTION("W83627HF driver");
2006 MODULE_LICENSE("GPL");
2007 
2008 module_init(sensors_w83627hf_init);
2009 module_exit(sensors_w83627hf_exit);
2010