1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * w83627ehf - Driver for the hardware monitoring functionality of 4 * the Winbond W83627EHF Super-I/O chip 5 * Copyright (C) 2005-2012 Jean Delvare <jdelvare@suse.de> 6 * Copyright (C) 2006 Yuan Mu (Winbond), 7 * Rudolf Marek <r.marek@assembler.cz> 8 * David Hubbard <david.c.hubbard@gmail.com> 9 * Daniel J Blueman <daniel.blueman@gmail.com> 10 * Copyright (C) 2010 Sheng-Yuan Huang (Nuvoton) (PS00) 11 * 12 * Shamelessly ripped from the w83627hf driver 13 * Copyright (C) 2003 Mark Studebaker 14 * 15 * Thanks to Leon Moonen, Steve Cliffe and Grant Coady for their help 16 * in testing and debugging this driver. 17 * 18 * This driver also supports the W83627EHG, which is the lead-free 19 * version of the W83627EHF. 20 * 21 * Supports the following chips: 22 * 23 * Chip #vin #fan #pwm #temp chip IDs man ID 24 * w83627ehf 10 5 4 3 0x8850 0x88 0x5ca3 25 * 0x8860 0xa1 26 * w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3 27 * w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3 28 * w83627uhg 8 2 2 3 0xa230 0xc1 0x5ca3 29 * w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3 30 * w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3 31 */ 32 33 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 34 35 #include <linux/module.h> 36 #include <linux/init.h> 37 #include <linux/slab.h> 38 #include <linux/jiffies.h> 39 #include <linux/platform_device.h> 40 #include <linux/hwmon.h> 41 #include <linux/hwmon-sysfs.h> 42 #include <linux/hwmon-vid.h> 43 #include <linux/err.h> 44 #include <linux/mutex.h> 45 #include <linux/acpi.h> 46 #include <linux/io.h> 47 #include "lm75.h" 48 49 enum kinds { 50 w83627ehf, w83627dhg, w83627dhg_p, w83627uhg, 51 w83667hg, w83667hg_b, 52 }; 53 54 /* used to set data->name = w83627ehf_device_names[data->sio_kind] */ 55 static const char * const w83627ehf_device_names[] = { 56 "w83627ehf", 57 "w83627dhg", 58 "w83627dhg", 59 "w83627uhg", 60 "w83667hg", 61 "w83667hg", 62 }; 63 64 static unsigned short force_id; 65 module_param(force_id, ushort, 0); 66 MODULE_PARM_DESC(force_id, "Override the detected device ID"); 67 68 #define DRVNAME "w83627ehf" 69 70 /* 71 * Super-I/O constants and functions 72 */ 73 74 #define W83627EHF_LD_HWM 0x0b 75 #define W83667HG_LD_VID 0x0d 76 77 #define SIO_REG_LDSEL 0x07 /* Logical device select */ 78 #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ 79 #define SIO_REG_EN_VRM10 0x2C /* GPIO3, GPIO4 selection */ 80 #define SIO_REG_ENABLE 0x30 /* Logical device enable */ 81 #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ 82 #define SIO_REG_VID_CTRL 0xF0 /* VID control */ 83 #define SIO_REG_VID_DATA 0xF1 /* VID data */ 84 85 #define SIO_W83627EHF_ID 0x8850 86 #define SIO_W83627EHG_ID 0x8860 87 #define SIO_W83627DHG_ID 0xa020 88 #define SIO_W83627DHG_P_ID 0xb070 89 #define SIO_W83627UHG_ID 0xa230 90 #define SIO_W83667HG_ID 0xa510 91 #define SIO_W83667HG_B_ID 0xb350 92 #define SIO_ID_MASK 0xFFF0 93 94 static inline void 95 superio_outb(int ioreg, int reg, int val) 96 { 97 outb(reg, ioreg); 98 outb(val, ioreg + 1); 99 } 100 101 static inline int 102 superio_inb(int ioreg, int reg) 103 { 104 outb(reg, ioreg); 105 return inb(ioreg + 1); 106 } 107 108 static inline void 109 superio_select(int ioreg, int ld) 110 { 111 outb(SIO_REG_LDSEL, ioreg); 112 outb(ld, ioreg + 1); 113 } 114 115 static inline int 116 superio_enter(int ioreg) 117 { 118 if (!request_muxed_region(ioreg, 2, DRVNAME)) 119 return -EBUSY; 120 121 outb(0x87, ioreg); 122 outb(0x87, ioreg); 123 124 return 0; 125 } 126 127 static inline void 128 superio_exit(int ioreg) 129 { 130 outb(0xaa, ioreg); 131 outb(0x02, ioreg); 132 outb(0x02, ioreg + 1); 133 release_region(ioreg, 2); 134 } 135 136 /* 137 * ISA constants 138 */ 139 140 #define IOREGION_ALIGNMENT (~7) 141 #define IOREGION_OFFSET 5 142 #define IOREGION_LENGTH 2 143 #define ADDR_REG_OFFSET 0 144 #define DATA_REG_OFFSET 1 145 146 #define W83627EHF_REG_BANK 0x4E 147 #define W83627EHF_REG_CONFIG 0x40 148 149 /* 150 * Not currently used: 151 * REG_MAN_ID has the value 0x5ca3 for all supported chips. 152 * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model. 153 * REG_MAN_ID is at port 0x4f 154 * REG_CHIP_ID is at port 0x58 155 */ 156 157 static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 }; 158 static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c }; 159 160 /* The W83627EHF registers for nr=7,8,9 are in bank 5 */ 161 #define W83627EHF_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \ 162 (0x554 + (((nr) - 7) * 2))) 163 #define W83627EHF_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \ 164 (0x555 + (((nr) - 7) * 2))) 165 #define W83627EHF_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \ 166 (0x550 + (nr) - 7)) 167 168 static const u16 W83627EHF_REG_TEMP[] = { 0x27, 0x150, 0x250, 0x7e }; 169 static const u16 W83627EHF_REG_TEMP_HYST[] = { 0x3a, 0x153, 0x253, 0 }; 170 static const u16 W83627EHF_REG_TEMP_OVER[] = { 0x39, 0x155, 0x255, 0 }; 171 static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0, 0x152, 0x252, 0 }; 172 173 /* Fan clock dividers are spread over the following five registers */ 174 #define W83627EHF_REG_FANDIV1 0x47 175 #define W83627EHF_REG_FANDIV2 0x4B 176 #define W83627EHF_REG_VBAT 0x5D 177 #define W83627EHF_REG_DIODE 0x59 178 #define W83627EHF_REG_SMI_OVT 0x4C 179 180 #define W83627EHF_REG_ALARM1 0x459 181 #define W83627EHF_REG_ALARM2 0x45A 182 #define W83627EHF_REG_ALARM3 0x45B 183 184 #define W83627EHF_REG_CASEOPEN_DET 0x42 /* SMI STATUS #2 */ 185 #define W83627EHF_REG_CASEOPEN_CLR 0x46 /* SMI MASK #3 */ 186 187 /* SmartFan registers */ 188 #define W83627EHF_REG_FAN_STEPUP_TIME 0x0f 189 #define W83627EHF_REG_FAN_STEPDOWN_TIME 0x0e 190 191 /* DC or PWM output fan configuration */ 192 static const u8 W83627EHF_REG_PWM_ENABLE[] = { 193 0x04, /* SYS FAN0 output mode and PWM mode */ 194 0x04, /* CPU FAN0 output mode and PWM mode */ 195 0x12, /* AUX FAN mode */ 196 0x62, /* CPU FAN1 mode */ 197 }; 198 199 static const u8 W83627EHF_PWM_MODE_SHIFT[] = { 0, 1, 0, 6 }; 200 static const u8 W83627EHF_PWM_ENABLE_SHIFT[] = { 2, 4, 1, 4 }; 201 202 /* FAN Duty Cycle, be used to control */ 203 static const u16 W83627EHF_REG_PWM[] = { 0x01, 0x03, 0x11, 0x61 }; 204 static const u16 W83627EHF_REG_TARGET[] = { 0x05, 0x06, 0x13, 0x63 }; 205 static const u8 W83627EHF_REG_TOLERANCE[] = { 0x07, 0x07, 0x14, 0x62 }; 206 207 /* Advanced Fan control, some values are common for all fans */ 208 static const u16 W83627EHF_REG_FAN_START_OUTPUT[] = { 0x0a, 0x0b, 0x16, 0x65 }; 209 static const u16 W83627EHF_REG_FAN_STOP_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 }; 210 static const u16 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0c, 0x0d, 0x17, 0x66 }; 211 212 static const u16 W83627EHF_REG_FAN_MAX_OUTPUT_COMMON[] 213 = { 0xff, 0x67, 0xff, 0x69 }; 214 static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_COMMON[] 215 = { 0xff, 0x68, 0xff, 0x6a }; 216 217 static const u16 W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B[] = { 0x67, 0x69, 0x6b }; 218 static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B[] 219 = { 0x68, 0x6a, 0x6c }; 220 221 static const u16 W83627EHF_REG_TEMP_OFFSET[] = { 0x454, 0x455, 0x456 }; 222 223 static const char *const w83667hg_b_temp_label[] = { 224 "SYSTIN", 225 "CPUTIN", 226 "AUXTIN", 227 "AMDTSI", 228 "PECI Agent 1", 229 "PECI Agent 2", 230 "PECI Agent 3", 231 "PECI Agent 4" 232 }; 233 234 #define NUM_REG_TEMP ARRAY_SIZE(W83627EHF_REG_TEMP) 235 236 static int is_word_sized(u16 reg) 237 { 238 return ((((reg & 0xff00) == 0x100 239 || (reg & 0xff00) == 0x200) 240 && ((reg & 0x00ff) == 0x50 241 || (reg & 0x00ff) == 0x53 242 || (reg & 0x00ff) == 0x55)) 243 || (reg & 0xfff0) == 0x630 244 || reg == 0x640 || reg == 0x642 245 || ((reg & 0xfff0) == 0x650 246 && (reg & 0x000f) >= 0x06) 247 || reg == 0x73 || reg == 0x75 || reg == 0x77 248 ); 249 } 250 251 /* 252 * Conversions 253 */ 254 255 /* 1 is PWM mode, output in ms */ 256 static inline unsigned int step_time_from_reg(u8 reg, u8 mode) 257 { 258 return mode ? 100 * reg : 400 * reg; 259 } 260 261 static inline u8 step_time_to_reg(unsigned int msec, u8 mode) 262 { 263 return clamp_val((mode ? (msec + 50) / 100 : (msec + 200) / 400), 264 1, 255); 265 } 266 267 static unsigned int fan_from_reg8(u16 reg, unsigned int divreg) 268 { 269 if (reg == 0 || reg == 255) 270 return 0; 271 return 1350000U / (reg << divreg); 272 } 273 274 static inline unsigned int 275 div_from_reg(u8 reg) 276 { 277 return 1 << reg; 278 } 279 280 /* 281 * Some of the voltage inputs have internal scaling, the tables below 282 * contain 8 (the ADC LSB in mV) * scaling factor * 100 283 */ 284 static const u16 scale_in_common[10] = { 285 800, 800, 1600, 1600, 800, 800, 800, 1600, 1600, 800 286 }; 287 static const u16 scale_in_w83627uhg[9] = { 288 800, 800, 3328, 3424, 800, 800, 0, 3328, 3400 289 }; 290 291 static inline long in_from_reg(u8 reg, u8 nr, const u16 *scale_in) 292 { 293 return DIV_ROUND_CLOSEST(reg * scale_in[nr], 100); 294 } 295 296 static inline u8 in_to_reg(u32 val, u8 nr, const u16 *scale_in) 297 { 298 return clamp_val(DIV_ROUND_CLOSEST(val * 100, scale_in[nr]), 0, 255); 299 } 300 301 /* 302 * Data structures and manipulation thereof 303 */ 304 305 struct w83627ehf_data { 306 int addr; /* IO base of hw monitor block */ 307 const char *name; 308 309 struct mutex lock; 310 311 u16 reg_temp[NUM_REG_TEMP]; 312 u16 reg_temp_over[NUM_REG_TEMP]; 313 u16 reg_temp_hyst[NUM_REG_TEMP]; 314 u16 reg_temp_config[NUM_REG_TEMP]; 315 u8 temp_src[NUM_REG_TEMP]; 316 const char * const *temp_label; 317 318 const u16 *REG_FAN_MAX_OUTPUT; 319 const u16 *REG_FAN_STEP_OUTPUT; 320 const u16 *scale_in; 321 322 struct mutex update_lock; 323 char valid; /* !=0 if following fields are valid */ 324 unsigned long last_updated; /* In jiffies */ 325 326 /* Register values */ 327 u8 bank; /* current register bank */ 328 u8 in_num; /* number of in inputs we have */ 329 u8 in[10]; /* Register value */ 330 u8 in_max[10]; /* Register value */ 331 u8 in_min[10]; /* Register value */ 332 unsigned int rpm[5]; 333 u16 fan_min[5]; 334 u8 fan_div[5]; 335 u8 has_fan; /* some fan inputs can be disabled */ 336 u8 has_fan_min; /* some fans don't have min register */ 337 u8 temp_type[3]; 338 s8 temp_offset[3]; 339 s16 temp[9]; 340 s16 temp_max[9]; 341 s16 temp_max_hyst[9]; 342 u32 alarms; 343 u8 caseopen; 344 345 u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */ 346 u8 pwm_enable[4]; /* 1->manual 347 * 2->thermal cruise mode (also called SmartFan I) 348 * 3->fan speed cruise mode 349 * 4->variable thermal cruise (also called 350 * SmartFan III) 351 * 5->enhanced variable thermal cruise (also called 352 * SmartFan IV) 353 */ 354 u8 pwm_enable_orig[4]; /* original value of pwm_enable */ 355 u8 pwm_num; /* number of pwm */ 356 u8 pwm[4]; 357 u8 target_temp[4]; 358 u8 tolerance[4]; 359 360 u8 fan_start_output[4]; /* minimum fan speed when spinning up */ 361 u8 fan_stop_output[4]; /* minimum fan speed when spinning down */ 362 u8 fan_stop_time[4]; /* time at minimum before disabling fan */ 363 u8 fan_max_output[4]; /* maximum fan speed */ 364 u8 fan_step_output[4]; /* rate of change output value */ 365 366 u8 vid; 367 u8 vrm; 368 369 u16 have_temp; 370 u16 have_temp_offset; 371 u8 in6_skip:1; 372 u8 temp3_val_only:1; 373 u8 have_vid:1; 374 375 /* Remember extra register values over suspend/resume */ 376 u8 vbat; 377 u8 fandiv1; 378 u8 fandiv2; 379 }; 380 381 struct w83627ehf_sio_data { 382 int sioreg; 383 enum kinds kind; 384 }; 385 386 /* 387 * On older chips, only registers 0x50-0x5f are banked. 388 * On more recent chips, all registers are banked. 389 * Assume that is the case and set the bank number for each access. 390 * Cache the bank number so it only needs to be set if it changes. 391 */ 392 static inline void w83627ehf_set_bank(struct w83627ehf_data *data, u16 reg) 393 { 394 u8 bank = reg >> 8; 395 if (data->bank != bank) { 396 outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET); 397 outb_p(bank, data->addr + DATA_REG_OFFSET); 398 data->bank = bank; 399 } 400 } 401 402 static u16 w83627ehf_read_value(struct w83627ehf_data *data, u16 reg) 403 { 404 int res, word_sized = is_word_sized(reg); 405 406 mutex_lock(&data->lock); 407 408 w83627ehf_set_bank(data, reg); 409 outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); 410 res = inb_p(data->addr + DATA_REG_OFFSET); 411 if (word_sized) { 412 outb_p((reg & 0xff) + 1, 413 data->addr + ADDR_REG_OFFSET); 414 res = (res << 8) + inb_p(data->addr + DATA_REG_OFFSET); 415 } 416 417 mutex_unlock(&data->lock); 418 return res; 419 } 420 421 static int w83627ehf_write_value(struct w83627ehf_data *data, u16 reg, 422 u16 value) 423 { 424 int word_sized = is_word_sized(reg); 425 426 mutex_lock(&data->lock); 427 428 w83627ehf_set_bank(data, reg); 429 outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); 430 if (word_sized) { 431 outb_p(value >> 8, data->addr + DATA_REG_OFFSET); 432 outb_p((reg & 0xff) + 1, 433 data->addr + ADDR_REG_OFFSET); 434 } 435 outb_p(value & 0xff, data->addr + DATA_REG_OFFSET); 436 437 mutex_unlock(&data->lock); 438 return 0; 439 } 440 441 /* We left-align 8-bit temperature values to make the code simpler */ 442 static u16 w83627ehf_read_temp(struct w83627ehf_data *data, u16 reg) 443 { 444 u16 res; 445 446 res = w83627ehf_read_value(data, reg); 447 if (!is_word_sized(reg)) 448 res <<= 8; 449 450 return res; 451 } 452 453 static int w83627ehf_write_temp(struct w83627ehf_data *data, u16 reg, 454 u16 value) 455 { 456 if (!is_word_sized(reg)) 457 value >>= 8; 458 return w83627ehf_write_value(data, reg, value); 459 } 460 461 /* This function assumes that the caller holds data->update_lock */ 462 static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr) 463 { 464 u8 reg; 465 466 switch (nr) { 467 case 0: 468 reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0xcf) 469 | ((data->fan_div[0] & 0x03) << 4); 470 /* fan5 input control bit is write only, compute the value */ 471 reg |= (data->has_fan & (1 << 4)) ? 1 : 0; 472 w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg); 473 reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xdf) 474 | ((data->fan_div[0] & 0x04) << 3); 475 w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg); 476 break; 477 case 1: 478 reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0x3f) 479 | ((data->fan_div[1] & 0x03) << 6); 480 /* fan5 input control bit is write only, compute the value */ 481 reg |= (data->has_fan & (1 << 4)) ? 1 : 0; 482 w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg); 483 reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xbf) 484 | ((data->fan_div[1] & 0x04) << 4); 485 w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg); 486 break; 487 case 2: 488 reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV2) & 0x3f) 489 | ((data->fan_div[2] & 0x03) << 6); 490 w83627ehf_write_value(data, W83627EHF_REG_FANDIV2, reg); 491 reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0x7f) 492 | ((data->fan_div[2] & 0x04) << 5); 493 w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg); 494 break; 495 case 3: 496 reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0xfc) 497 | (data->fan_div[3] & 0x03); 498 w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg); 499 reg = (w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT) & 0x7f) 500 | ((data->fan_div[3] & 0x04) << 5); 501 w83627ehf_write_value(data, W83627EHF_REG_SMI_OVT, reg); 502 break; 503 case 4: 504 reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0x73) 505 | ((data->fan_div[4] & 0x03) << 2) 506 | ((data->fan_div[4] & 0x04) << 5); 507 w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg); 508 break; 509 } 510 } 511 512 static void w83627ehf_update_fan_div(struct w83627ehf_data *data) 513 { 514 int i; 515 516 i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1); 517 data->fan_div[0] = (i >> 4) & 0x03; 518 data->fan_div[1] = (i >> 6) & 0x03; 519 i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV2); 520 data->fan_div[2] = (i >> 6) & 0x03; 521 i = w83627ehf_read_value(data, W83627EHF_REG_VBAT); 522 data->fan_div[0] |= (i >> 3) & 0x04; 523 data->fan_div[1] |= (i >> 4) & 0x04; 524 data->fan_div[2] |= (i >> 5) & 0x04; 525 if (data->has_fan & ((1 << 3) | (1 << 4))) { 526 i = w83627ehf_read_value(data, W83627EHF_REG_DIODE); 527 data->fan_div[3] = i & 0x03; 528 data->fan_div[4] = ((i >> 2) & 0x03) 529 | ((i >> 5) & 0x04); 530 } 531 if (data->has_fan & (1 << 3)) { 532 i = w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT); 533 data->fan_div[3] |= (i >> 5) & 0x04; 534 } 535 } 536 537 static void w83627ehf_update_pwm(struct w83627ehf_data *data) 538 { 539 int i; 540 int pwmcfg = 0, tolerance = 0; /* shut up the compiler */ 541 542 for (i = 0; i < data->pwm_num; i++) { 543 if (!(data->has_fan & (1 << i))) 544 continue; 545 546 /* pwmcfg, tolerance mapped for i=0, i=1 to same reg */ 547 if (i != 1) { 548 pwmcfg = w83627ehf_read_value(data, 549 W83627EHF_REG_PWM_ENABLE[i]); 550 tolerance = w83627ehf_read_value(data, 551 W83627EHF_REG_TOLERANCE[i]); 552 } 553 data->pwm_mode[i] = 554 ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1; 555 data->pwm_enable[i] = ((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i]) 556 & 3) + 1; 557 data->pwm[i] = w83627ehf_read_value(data, W83627EHF_REG_PWM[i]); 558 559 data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0)) & 0x0f; 560 } 561 } 562 563 static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) 564 { 565 struct w83627ehf_data *data = dev_get_drvdata(dev); 566 int i; 567 568 mutex_lock(&data->update_lock); 569 570 if (time_after(jiffies, data->last_updated + HZ + HZ/2) 571 || !data->valid) { 572 /* Fan clock dividers */ 573 w83627ehf_update_fan_div(data); 574 575 /* Measured voltages and limits */ 576 for (i = 0; i < data->in_num; i++) { 577 if ((i == 6) && data->in6_skip) 578 continue; 579 580 data->in[i] = w83627ehf_read_value(data, 581 W83627EHF_REG_IN(i)); 582 data->in_min[i] = w83627ehf_read_value(data, 583 W83627EHF_REG_IN_MIN(i)); 584 data->in_max[i] = w83627ehf_read_value(data, 585 W83627EHF_REG_IN_MAX(i)); 586 } 587 588 /* Measured fan speeds and limits */ 589 for (i = 0; i < 5; i++) { 590 u16 reg; 591 592 if (!(data->has_fan & (1 << i))) 593 continue; 594 595 reg = w83627ehf_read_value(data, W83627EHF_REG_FAN[i]); 596 data->rpm[i] = fan_from_reg8(reg, data->fan_div[i]); 597 598 if (data->has_fan_min & (1 << i)) 599 data->fan_min[i] = w83627ehf_read_value(data, 600 W83627EHF_REG_FAN_MIN[i]); 601 602 /* 603 * If we failed to measure the fan speed and clock 604 * divider can be increased, let's try that for next 605 * time 606 */ 607 if (reg >= 0xff && data->fan_div[i] < 0x07) { 608 dev_dbg(dev, 609 "Increasing fan%d clock divider from %u to %u\n", 610 i + 1, div_from_reg(data->fan_div[i]), 611 div_from_reg(data->fan_div[i] + 1)); 612 data->fan_div[i]++; 613 w83627ehf_write_fan_div(data, i); 614 /* Preserve min limit if possible */ 615 if ((data->has_fan_min & (1 << i)) 616 && data->fan_min[i] >= 2 617 && data->fan_min[i] != 255) 618 w83627ehf_write_value(data, 619 W83627EHF_REG_FAN_MIN[i], 620 (data->fan_min[i] /= 2)); 621 } 622 } 623 624 w83627ehf_update_pwm(data); 625 626 for (i = 0; i < data->pwm_num; i++) { 627 if (!(data->has_fan & (1 << i))) 628 continue; 629 630 data->fan_start_output[i] = 631 w83627ehf_read_value(data, 632 W83627EHF_REG_FAN_START_OUTPUT[i]); 633 data->fan_stop_output[i] = 634 w83627ehf_read_value(data, 635 W83627EHF_REG_FAN_STOP_OUTPUT[i]); 636 data->fan_stop_time[i] = 637 w83627ehf_read_value(data, 638 W83627EHF_REG_FAN_STOP_TIME[i]); 639 640 if (data->REG_FAN_MAX_OUTPUT && 641 data->REG_FAN_MAX_OUTPUT[i] != 0xff) 642 data->fan_max_output[i] = 643 w83627ehf_read_value(data, 644 data->REG_FAN_MAX_OUTPUT[i]); 645 646 if (data->REG_FAN_STEP_OUTPUT && 647 data->REG_FAN_STEP_OUTPUT[i] != 0xff) 648 data->fan_step_output[i] = 649 w83627ehf_read_value(data, 650 data->REG_FAN_STEP_OUTPUT[i]); 651 652 data->target_temp[i] = 653 w83627ehf_read_value(data, 654 W83627EHF_REG_TARGET[i]) & 655 (data->pwm_mode[i] == 1 ? 0x7f : 0xff); 656 } 657 658 /* Measured temperatures and limits */ 659 for (i = 0; i < NUM_REG_TEMP; i++) { 660 if (!(data->have_temp & (1 << i))) 661 continue; 662 data->temp[i] = w83627ehf_read_temp(data, 663 data->reg_temp[i]); 664 if (data->reg_temp_over[i]) 665 data->temp_max[i] 666 = w83627ehf_read_temp(data, 667 data->reg_temp_over[i]); 668 if (data->reg_temp_hyst[i]) 669 data->temp_max_hyst[i] 670 = w83627ehf_read_temp(data, 671 data->reg_temp_hyst[i]); 672 if (i > 2) 673 continue; 674 if (data->have_temp_offset & (1 << i)) 675 data->temp_offset[i] 676 = w83627ehf_read_value(data, 677 W83627EHF_REG_TEMP_OFFSET[i]); 678 } 679 680 data->alarms = w83627ehf_read_value(data, 681 W83627EHF_REG_ALARM1) | 682 (w83627ehf_read_value(data, 683 W83627EHF_REG_ALARM2) << 8) | 684 (w83627ehf_read_value(data, 685 W83627EHF_REG_ALARM3) << 16); 686 687 data->caseopen = w83627ehf_read_value(data, 688 W83627EHF_REG_CASEOPEN_DET); 689 690 data->last_updated = jiffies; 691 data->valid = 1; 692 } 693 694 mutex_unlock(&data->update_lock); 695 return data; 696 } 697 698 #define store_in_reg(REG, reg) \ 699 static int \ 700 store_in_##reg(struct device *dev, struct w83627ehf_data *data, int channel, \ 701 long val) \ 702 { \ 703 if (val < 0) \ 704 return -EINVAL; \ 705 mutex_lock(&data->update_lock); \ 706 data->in_##reg[channel] = in_to_reg(val, channel, data->scale_in); \ 707 w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(channel), \ 708 data->in_##reg[channel]); \ 709 mutex_unlock(&data->update_lock); \ 710 return 0; \ 711 } 712 713 store_in_reg(MIN, min) 714 store_in_reg(MAX, max) 715 716 static int 717 store_fan_min(struct device *dev, struct w83627ehf_data *data, int channel, 718 long val) 719 { 720 unsigned int reg; 721 u8 new_div; 722 723 if (val < 0) 724 return -EINVAL; 725 726 mutex_lock(&data->update_lock); 727 if (!val) { 728 /* No min limit, alarm disabled */ 729 data->fan_min[channel] = 255; 730 new_div = data->fan_div[channel]; /* No change */ 731 dev_info(dev, "fan%u low limit and alarm disabled\n", 732 channel + 1); 733 } else if ((reg = 1350000U / val) >= 128 * 255) { 734 /* 735 * Speed below this value cannot possibly be represented, 736 * even with the highest divider (128) 737 */ 738 data->fan_min[channel] = 254; 739 new_div = 7; /* 128 == (1 << 7) */ 740 dev_warn(dev, 741 "fan%u low limit %lu below minimum %u, set to minimum\n", 742 channel + 1, val, fan_from_reg8(254, 7)); 743 } else if (!reg) { 744 /* 745 * Speed above this value cannot possibly be represented, 746 * even with the lowest divider (1) 747 */ 748 data->fan_min[channel] = 1; 749 new_div = 0; /* 1 == (1 << 0) */ 750 dev_warn(dev, 751 "fan%u low limit %lu above maximum %u, set to maximum\n", 752 channel + 1, val, fan_from_reg8(1, 0)); 753 } else { 754 /* 755 * Automatically pick the best divider, i.e. the one such 756 * that the min limit will correspond to a register value 757 * in the 96..192 range 758 */ 759 new_div = 0; 760 while (reg > 192 && new_div < 7) { 761 reg >>= 1; 762 new_div++; 763 } 764 data->fan_min[channel] = reg; 765 } 766 767 /* 768 * Write both the fan clock divider (if it changed) and the new 769 * fan min (unconditionally) 770 */ 771 if (new_div != data->fan_div[channel]) { 772 dev_dbg(dev, "fan%u clock divider changed from %u to %u\n", 773 channel + 1, div_from_reg(data->fan_div[channel]), 774 div_from_reg(new_div)); 775 data->fan_div[channel] = new_div; 776 w83627ehf_write_fan_div(data, channel); 777 /* Give the chip time to sample a new speed value */ 778 data->last_updated = jiffies; 779 } 780 781 w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[channel], 782 data->fan_min[channel]); 783 mutex_unlock(&data->update_lock); 784 785 return 0; 786 } 787 788 #define store_temp_reg(addr, reg) \ 789 static int \ 790 store_##reg(struct device *dev, struct w83627ehf_data *data, int channel, \ 791 long val) \ 792 { \ 793 mutex_lock(&data->update_lock); \ 794 data->reg[channel] = LM75_TEMP_TO_REG(val); \ 795 w83627ehf_write_temp(data, data->addr[channel], data->reg[channel]); \ 796 mutex_unlock(&data->update_lock); \ 797 return 0; \ 798 } 799 store_temp_reg(reg_temp_over, temp_max); 800 store_temp_reg(reg_temp_hyst, temp_max_hyst); 801 802 static int 803 store_temp_offset(struct device *dev, struct w83627ehf_data *data, int channel, 804 long val) 805 { 806 val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127); 807 808 mutex_lock(&data->update_lock); 809 data->temp_offset[channel] = val; 810 w83627ehf_write_value(data, W83627EHF_REG_TEMP_OFFSET[channel], val); 811 mutex_unlock(&data->update_lock); 812 return 0; 813 } 814 815 static int 816 store_pwm_mode(struct device *dev, struct w83627ehf_data *data, int channel, 817 long val) 818 { 819 u16 reg; 820 821 if (val < 0 || val > 1) 822 return -EINVAL; 823 824 mutex_lock(&data->update_lock); 825 reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[channel]); 826 data->pwm_mode[channel] = val; 827 reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[channel]); 828 if (!val) 829 reg |= 1 << W83627EHF_PWM_MODE_SHIFT[channel]; 830 w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[channel], reg); 831 mutex_unlock(&data->update_lock); 832 return 0; 833 } 834 835 static int 836 store_pwm(struct device *dev, struct w83627ehf_data *data, int channel, 837 long val) 838 { 839 val = clamp_val(val, 0, 255); 840 841 mutex_lock(&data->update_lock); 842 data->pwm[channel] = val; 843 w83627ehf_write_value(data, W83627EHF_REG_PWM[channel], val); 844 mutex_unlock(&data->update_lock); 845 return 0; 846 } 847 848 static int 849 store_pwm_enable(struct device *dev, struct w83627ehf_data *data, int channel, 850 long val) 851 { 852 u16 reg; 853 854 if (!val || val < 0 || 855 (val > 4 && val != data->pwm_enable_orig[channel])) 856 return -EINVAL; 857 858 mutex_lock(&data->update_lock); 859 data->pwm_enable[channel] = val; 860 reg = w83627ehf_read_value(data, 861 W83627EHF_REG_PWM_ENABLE[channel]); 862 reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[channel]); 863 reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[channel]; 864 w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[channel], 865 reg); 866 mutex_unlock(&data->update_lock); 867 return 0; 868 } 869 870 #define show_tol_temp(reg) \ 871 static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ 872 char *buf) \ 873 { \ 874 struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); \ 875 struct sensor_device_attribute *sensor_attr = \ 876 to_sensor_dev_attr(attr); \ 877 int nr = sensor_attr->index; \ 878 return sprintf(buf, "%d\n", data->reg[nr] * 1000); \ 879 } 880 881 show_tol_temp(tolerance) 882 show_tol_temp(target_temp) 883 884 static ssize_t 885 store_target_temp(struct device *dev, struct device_attribute *attr, 886 const char *buf, size_t count) 887 { 888 struct w83627ehf_data *data = dev_get_drvdata(dev); 889 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 890 int nr = sensor_attr->index; 891 long val; 892 int err; 893 894 err = kstrtol(buf, 10, &val); 895 if (err < 0) 896 return err; 897 898 val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 127); 899 900 mutex_lock(&data->update_lock); 901 data->target_temp[nr] = val; 902 w83627ehf_write_value(data, W83627EHF_REG_TARGET[nr], val); 903 mutex_unlock(&data->update_lock); 904 return count; 905 } 906 907 static ssize_t 908 store_tolerance(struct device *dev, struct device_attribute *attr, 909 const char *buf, size_t count) 910 { 911 struct w83627ehf_data *data = dev_get_drvdata(dev); 912 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 913 int nr = sensor_attr->index; 914 u16 reg; 915 long val; 916 int err; 917 918 err = kstrtol(buf, 10, &val); 919 if (err < 0) 920 return err; 921 922 /* Limit the temp to 0C - 15C */ 923 val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 15); 924 925 mutex_lock(&data->update_lock); 926 reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]); 927 if (nr == 1) 928 reg = (reg & 0x0f) | (val << 4); 929 else 930 reg = (reg & 0xf0) | val; 931 w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg); 932 data->tolerance[nr] = val; 933 mutex_unlock(&data->update_lock); 934 return count; 935 } 936 937 static SENSOR_DEVICE_ATTR(pwm1_target, 0644, show_target_temp, 938 store_target_temp, 0); 939 static SENSOR_DEVICE_ATTR(pwm2_target, 0644, show_target_temp, 940 store_target_temp, 1); 941 static SENSOR_DEVICE_ATTR(pwm3_target, 0644, show_target_temp, 942 store_target_temp, 2); 943 static SENSOR_DEVICE_ATTR(pwm4_target, 0644, show_target_temp, 944 store_target_temp, 3); 945 946 static SENSOR_DEVICE_ATTR(pwm1_tolerance, 0644, show_tolerance, 947 store_tolerance, 0); 948 static SENSOR_DEVICE_ATTR(pwm2_tolerance, 0644, show_tolerance, 949 store_tolerance, 1); 950 static SENSOR_DEVICE_ATTR(pwm3_tolerance, 0644, show_tolerance, 951 store_tolerance, 2); 952 static SENSOR_DEVICE_ATTR(pwm4_tolerance, 0644, show_tolerance, 953 store_tolerance, 3); 954 955 /* Smart Fan registers */ 956 957 #define fan_functions(reg, REG) \ 958 static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ 959 char *buf) \ 960 { \ 961 struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); \ 962 struct sensor_device_attribute *sensor_attr = \ 963 to_sensor_dev_attr(attr); \ 964 int nr = sensor_attr->index; \ 965 return sprintf(buf, "%d\n", data->reg[nr]); \ 966 } \ 967 static ssize_t \ 968 store_##reg(struct device *dev, struct device_attribute *attr, \ 969 const char *buf, size_t count) \ 970 { \ 971 struct w83627ehf_data *data = dev_get_drvdata(dev); \ 972 struct sensor_device_attribute *sensor_attr = \ 973 to_sensor_dev_attr(attr); \ 974 int nr = sensor_attr->index; \ 975 unsigned long val; \ 976 int err; \ 977 err = kstrtoul(buf, 10, &val); \ 978 if (err < 0) \ 979 return err; \ 980 val = clamp_val(val, 1, 255); \ 981 mutex_lock(&data->update_lock); \ 982 data->reg[nr] = val; \ 983 w83627ehf_write_value(data, REG[nr], val); \ 984 mutex_unlock(&data->update_lock); \ 985 return count; \ 986 } 987 988 fan_functions(fan_start_output, W83627EHF_REG_FAN_START_OUTPUT) 989 fan_functions(fan_stop_output, W83627EHF_REG_FAN_STOP_OUTPUT) 990 fan_functions(fan_max_output, data->REG_FAN_MAX_OUTPUT) 991 fan_functions(fan_step_output, data->REG_FAN_STEP_OUTPUT) 992 993 #define fan_time_functions(reg, REG) \ 994 static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ 995 char *buf) \ 996 { \ 997 struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); \ 998 struct sensor_device_attribute *sensor_attr = \ 999 to_sensor_dev_attr(attr); \ 1000 int nr = sensor_attr->index; \ 1001 return sprintf(buf, "%d\n", \ 1002 step_time_from_reg(data->reg[nr], \ 1003 data->pwm_mode[nr])); \ 1004 } \ 1005 \ 1006 static ssize_t \ 1007 store_##reg(struct device *dev, struct device_attribute *attr, \ 1008 const char *buf, size_t count) \ 1009 { \ 1010 struct w83627ehf_data *data = dev_get_drvdata(dev); \ 1011 struct sensor_device_attribute *sensor_attr = \ 1012 to_sensor_dev_attr(attr); \ 1013 int nr = sensor_attr->index; \ 1014 unsigned long val; \ 1015 int err; \ 1016 err = kstrtoul(buf, 10, &val); \ 1017 if (err < 0) \ 1018 return err; \ 1019 val = step_time_to_reg(val, data->pwm_mode[nr]); \ 1020 mutex_lock(&data->update_lock); \ 1021 data->reg[nr] = val; \ 1022 w83627ehf_write_value(data, REG[nr], val); \ 1023 mutex_unlock(&data->update_lock); \ 1024 return count; \ 1025 } \ 1026 1027 fan_time_functions(fan_stop_time, W83627EHF_REG_FAN_STOP_TIME) 1028 1029 static SENSOR_DEVICE_ATTR(pwm4_stop_time, 0644, show_fan_stop_time, 1030 store_fan_stop_time, 3); 1031 static SENSOR_DEVICE_ATTR(pwm4_start_output, 0644, show_fan_start_output, 1032 store_fan_start_output, 3); 1033 static SENSOR_DEVICE_ATTR(pwm4_stop_output, 0644, show_fan_stop_output, 1034 store_fan_stop_output, 3); 1035 static SENSOR_DEVICE_ATTR(pwm4_max_output, 0644, show_fan_max_output, 1036 store_fan_max_output, 3); 1037 static SENSOR_DEVICE_ATTR(pwm4_step_output, 0644, show_fan_step_output, 1038 store_fan_step_output, 3); 1039 1040 static SENSOR_DEVICE_ATTR(pwm3_stop_time, 0644, show_fan_stop_time, 1041 store_fan_stop_time, 2); 1042 static SENSOR_DEVICE_ATTR(pwm3_start_output, 0644, show_fan_start_output, 1043 store_fan_start_output, 2); 1044 static SENSOR_DEVICE_ATTR(pwm3_stop_output, 0644, show_fan_stop_output, 1045 store_fan_stop_output, 2); 1046 1047 static SENSOR_DEVICE_ATTR(pwm1_stop_time, 0644, show_fan_stop_time, 1048 store_fan_stop_time, 0); 1049 static SENSOR_DEVICE_ATTR(pwm2_stop_time, 0644, show_fan_stop_time, 1050 store_fan_stop_time, 1); 1051 static SENSOR_DEVICE_ATTR(pwm1_start_output, 0644, show_fan_start_output, 1052 store_fan_start_output, 0); 1053 static SENSOR_DEVICE_ATTR(pwm2_start_output, 0644, show_fan_start_output, 1054 store_fan_start_output, 1); 1055 static SENSOR_DEVICE_ATTR(pwm1_stop_output, 0644, show_fan_stop_output, 1056 store_fan_stop_output, 0); 1057 static SENSOR_DEVICE_ATTR(pwm2_stop_output, 0644, show_fan_stop_output, 1058 store_fan_stop_output, 1); 1059 1060 1061 /* 1062 * pwm1 and pwm3 don't support max and step settings on all chips. 1063 * Need to check support while generating/removing attribute files. 1064 */ 1065 static SENSOR_DEVICE_ATTR(pwm1_max_output, 0644, show_fan_max_output, 1066 store_fan_max_output, 0); 1067 static SENSOR_DEVICE_ATTR(pwm1_step_output, 0644, show_fan_step_output, 1068 store_fan_step_output, 0); 1069 static SENSOR_DEVICE_ATTR(pwm2_max_output, 0644, show_fan_max_output, 1070 store_fan_max_output, 1); 1071 static SENSOR_DEVICE_ATTR(pwm2_step_output, 0644, show_fan_step_output, 1072 store_fan_step_output, 1); 1073 static SENSOR_DEVICE_ATTR(pwm3_max_output, 0644, show_fan_max_output, 1074 store_fan_max_output, 2); 1075 static SENSOR_DEVICE_ATTR(pwm3_step_output, 0644, show_fan_step_output, 1076 store_fan_step_output, 2); 1077 1078 static ssize_t 1079 cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf) 1080 { 1081 struct w83627ehf_data *data = dev_get_drvdata(dev); 1082 return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); 1083 } 1084 static DEVICE_ATTR_RO(cpu0_vid); 1085 1086 1087 /* Case open detection */ 1088 static int 1089 clear_caseopen(struct device *dev, struct w83627ehf_data *data, int channel, 1090 long val) 1091 { 1092 const u16 mask = 0x80; 1093 u16 reg; 1094 1095 if (val != 0 || channel != 0) 1096 return -EINVAL; 1097 1098 mutex_lock(&data->update_lock); 1099 reg = w83627ehf_read_value(data, W83627EHF_REG_CASEOPEN_CLR); 1100 w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg | mask); 1101 w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg & ~mask); 1102 data->valid = 0; /* Force cache refresh */ 1103 mutex_unlock(&data->update_lock); 1104 1105 return 0; 1106 } 1107 1108 static umode_t w83627ehf_attrs_visible(struct kobject *kobj, 1109 struct attribute *a, int n) 1110 { 1111 struct device *dev = kobj_to_dev(kobj); 1112 struct w83627ehf_data *data = dev_get_drvdata(dev); 1113 struct device_attribute *devattr; 1114 struct sensor_device_attribute *sda; 1115 1116 devattr = container_of(a, struct device_attribute, attr); 1117 1118 /* Not sensor */ 1119 if (devattr->show == cpu0_vid_show && data->have_vid) 1120 return a->mode; 1121 1122 sda = (struct sensor_device_attribute *)devattr; 1123 1124 if (sda->index < 2 && 1125 (devattr->show == show_fan_stop_time || 1126 devattr->show == show_fan_start_output || 1127 devattr->show == show_fan_stop_output)) 1128 return a->mode; 1129 1130 if (sda->index < 3 && 1131 (devattr->show == show_fan_max_output || 1132 devattr->show == show_fan_step_output) && 1133 data->REG_FAN_STEP_OUTPUT && 1134 data->REG_FAN_STEP_OUTPUT[sda->index] != 0xff) 1135 return a->mode; 1136 1137 /* if fan3 and fan4 are enabled create the files for them */ 1138 if (sda->index == 2 && 1139 (data->has_fan & (1 << 2)) && data->pwm_num >= 3 && 1140 (devattr->show == show_fan_stop_time || 1141 devattr->show == show_fan_start_output || 1142 devattr->show == show_fan_stop_output)) 1143 return a->mode; 1144 1145 if (sda->index == 3 && 1146 (data->has_fan & (1 << 3)) && data->pwm_num >= 4 && 1147 (devattr->show == show_fan_stop_time || 1148 devattr->show == show_fan_start_output || 1149 devattr->show == show_fan_stop_output || 1150 devattr->show == show_fan_max_output || 1151 devattr->show == show_fan_step_output)) 1152 return a->mode; 1153 1154 if ((devattr->show == show_target_temp || 1155 devattr->show == show_tolerance) && 1156 (data->has_fan & (1 << sda->index)) && 1157 sda->index < data->pwm_num) 1158 return a->mode; 1159 1160 return 0; 1161 } 1162 1163 /* These groups handle non-standard attributes used in this device */ 1164 static struct attribute *w83627ehf_attrs[] = { 1165 1166 &sensor_dev_attr_pwm1_stop_time.dev_attr.attr, 1167 &sensor_dev_attr_pwm1_start_output.dev_attr.attr, 1168 &sensor_dev_attr_pwm1_stop_output.dev_attr.attr, 1169 &sensor_dev_attr_pwm1_max_output.dev_attr.attr, 1170 &sensor_dev_attr_pwm1_step_output.dev_attr.attr, 1171 &sensor_dev_attr_pwm1_target.dev_attr.attr, 1172 &sensor_dev_attr_pwm1_tolerance.dev_attr.attr, 1173 1174 &sensor_dev_attr_pwm2_stop_time.dev_attr.attr, 1175 &sensor_dev_attr_pwm2_start_output.dev_attr.attr, 1176 &sensor_dev_attr_pwm2_stop_output.dev_attr.attr, 1177 &sensor_dev_attr_pwm2_max_output.dev_attr.attr, 1178 &sensor_dev_attr_pwm2_step_output.dev_attr.attr, 1179 &sensor_dev_attr_pwm2_target.dev_attr.attr, 1180 &sensor_dev_attr_pwm2_tolerance.dev_attr.attr, 1181 1182 &sensor_dev_attr_pwm3_stop_time.dev_attr.attr, 1183 &sensor_dev_attr_pwm3_start_output.dev_attr.attr, 1184 &sensor_dev_attr_pwm3_stop_output.dev_attr.attr, 1185 &sensor_dev_attr_pwm3_max_output.dev_attr.attr, 1186 &sensor_dev_attr_pwm3_step_output.dev_attr.attr, 1187 &sensor_dev_attr_pwm3_target.dev_attr.attr, 1188 &sensor_dev_attr_pwm3_tolerance.dev_attr.attr, 1189 1190 &sensor_dev_attr_pwm4_stop_time.dev_attr.attr, 1191 &sensor_dev_attr_pwm4_start_output.dev_attr.attr, 1192 &sensor_dev_attr_pwm4_stop_output.dev_attr.attr, 1193 &sensor_dev_attr_pwm4_max_output.dev_attr.attr, 1194 &sensor_dev_attr_pwm4_step_output.dev_attr.attr, 1195 &sensor_dev_attr_pwm4_target.dev_attr.attr, 1196 &sensor_dev_attr_pwm4_tolerance.dev_attr.attr, 1197 1198 &dev_attr_cpu0_vid.attr, 1199 NULL 1200 }; 1201 1202 static const struct attribute_group w83627ehf_group = { 1203 .attrs = w83627ehf_attrs, 1204 .is_visible = w83627ehf_attrs_visible, 1205 }; 1206 1207 static const struct attribute_group *w83627ehf_groups[] = { 1208 &w83627ehf_group, 1209 NULL 1210 }; 1211 1212 /* 1213 * Driver and device management 1214 */ 1215 1216 /* Get the monitoring functions started */ 1217 static inline void w83627ehf_init_device(struct w83627ehf_data *data, 1218 enum kinds kind) 1219 { 1220 int i; 1221 u8 tmp, diode; 1222 1223 /* Start monitoring is needed */ 1224 tmp = w83627ehf_read_value(data, W83627EHF_REG_CONFIG); 1225 if (!(tmp & 0x01)) 1226 w83627ehf_write_value(data, W83627EHF_REG_CONFIG, 1227 tmp | 0x01); 1228 1229 /* Enable temperature sensors if needed */ 1230 for (i = 0; i < NUM_REG_TEMP; i++) { 1231 if (!(data->have_temp & (1 << i))) 1232 continue; 1233 if (!data->reg_temp_config[i]) 1234 continue; 1235 tmp = w83627ehf_read_value(data, 1236 data->reg_temp_config[i]); 1237 if (tmp & 0x01) 1238 w83627ehf_write_value(data, 1239 data->reg_temp_config[i], 1240 tmp & 0xfe); 1241 } 1242 1243 /* Enable VBAT monitoring if needed */ 1244 tmp = w83627ehf_read_value(data, W83627EHF_REG_VBAT); 1245 if (!(tmp & 0x01)) 1246 w83627ehf_write_value(data, W83627EHF_REG_VBAT, tmp | 0x01); 1247 1248 /* Get thermal sensor types */ 1249 switch (kind) { 1250 case w83627ehf: 1251 diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE); 1252 break; 1253 case w83627uhg: 1254 diode = 0x00; 1255 break; 1256 default: 1257 diode = 0x70; 1258 } 1259 for (i = 0; i < 3; i++) { 1260 const char *label = NULL; 1261 1262 if (data->temp_label) 1263 label = data->temp_label[data->temp_src[i]]; 1264 1265 /* Digital source overrides analog type */ 1266 if (label && strncmp(label, "PECI", 4) == 0) 1267 data->temp_type[i] = 6; 1268 else if (label && strncmp(label, "AMD", 3) == 0) 1269 data->temp_type[i] = 5; 1270 else if ((tmp & (0x02 << i))) 1271 data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 3; 1272 else 1273 data->temp_type[i] = 4; /* thermistor */ 1274 } 1275 } 1276 1277 static void 1278 w83627ehf_set_temp_reg_ehf(struct w83627ehf_data *data, int n_temp) 1279 { 1280 int i; 1281 1282 for (i = 0; i < n_temp; i++) { 1283 data->reg_temp[i] = W83627EHF_REG_TEMP[i]; 1284 data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i]; 1285 data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i]; 1286 data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i]; 1287 } 1288 } 1289 1290 static void 1291 w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data, 1292 struct w83627ehf_data *data) 1293 { 1294 int fan3pin, fan4pin, fan5pin, regval; 1295 1296 /* The W83627UHG is simple, only two fan inputs, no config */ 1297 if (sio_data->kind == w83627uhg) { 1298 data->has_fan = 0x03; /* fan1 and fan2 */ 1299 data->has_fan_min = 0x03; 1300 return; 1301 } 1302 1303 /* fan4 and fan5 share some pins with the GPIO and serial flash */ 1304 if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) { 1305 fan3pin = 1; 1306 fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40; 1307 fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20; 1308 } else { 1309 fan3pin = 1; 1310 fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06); 1311 fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02); 1312 } 1313 1314 data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */ 1315 data->has_fan |= (fan3pin << 2); 1316 data->has_fan_min |= (fan3pin << 2); 1317 1318 /* 1319 * It looks like fan4 and fan5 pins can be alternatively used 1320 * as fan on/off switches, but fan5 control is write only :/ 1321 * We assume that if the serial interface is disabled, designers 1322 * connected fan5 as input unless they are emitting log 1, which 1323 * is not the default. 1324 */ 1325 regval = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1); 1326 if ((regval & (1 << 2)) && fan4pin) { 1327 data->has_fan |= (1 << 3); 1328 data->has_fan_min |= (1 << 3); 1329 } 1330 if (!(regval & (1 << 1)) && fan5pin) { 1331 data->has_fan |= (1 << 4); 1332 data->has_fan_min |= (1 << 4); 1333 } 1334 } 1335 1336 static umode_t 1337 w83627ehf_is_visible(const void *drvdata, enum hwmon_sensor_types type, 1338 u32 attr, int channel) 1339 { 1340 const struct w83627ehf_data *data = drvdata; 1341 1342 switch (type) { 1343 case hwmon_temp: 1344 /* channel 0.., name 1.. */ 1345 if (!(data->have_temp & (1 << channel))) 1346 return 0; 1347 if (attr == hwmon_temp_input) 1348 return 0444; 1349 if (attr == hwmon_temp_label) { 1350 if (data->temp_label) 1351 return 0444; 1352 return 0; 1353 } 1354 if (channel == 2 && data->temp3_val_only) 1355 return 0; 1356 if (attr == hwmon_temp_max) { 1357 if (data->reg_temp_over[channel]) 1358 return 0644; 1359 else 1360 return 0; 1361 } 1362 if (attr == hwmon_temp_max_hyst) { 1363 if (data->reg_temp_hyst[channel]) 1364 return 0644; 1365 else 1366 return 0; 1367 } 1368 if (channel > 2) 1369 return 0; 1370 if (attr == hwmon_temp_alarm || attr == hwmon_temp_type) 1371 return 0444; 1372 if (attr == hwmon_temp_offset) { 1373 if (data->have_temp_offset & (1 << channel)) 1374 return 0644; 1375 else 1376 return 0; 1377 } 1378 break; 1379 1380 case hwmon_fan: 1381 /* channel 0.., name 1.. */ 1382 if (!(data->has_fan & (1 << channel))) 1383 return 0; 1384 if (attr == hwmon_fan_input || attr == hwmon_fan_alarm) 1385 return 0444; 1386 if (attr == hwmon_fan_div) { 1387 return 0444; 1388 } 1389 if (attr == hwmon_fan_min) { 1390 if (data->has_fan_min & (1 << channel)) 1391 return 0644; 1392 else 1393 return 0; 1394 } 1395 break; 1396 1397 case hwmon_in: 1398 /* channel 0.., name 0.. */ 1399 if (channel >= data->in_num) 1400 return 0; 1401 if (channel == 6 && data->in6_skip) 1402 return 0; 1403 if (attr == hwmon_in_alarm || attr == hwmon_in_input) 1404 return 0444; 1405 if (attr == hwmon_in_min || attr == hwmon_in_max) 1406 return 0644; 1407 break; 1408 1409 case hwmon_pwm: 1410 /* channel 0.., name 1.. */ 1411 if (!(data->has_fan & (1 << channel)) || 1412 channel >= data->pwm_num) 1413 return 0; 1414 if (attr == hwmon_pwm_mode || attr == hwmon_pwm_enable || 1415 attr == hwmon_pwm_input) 1416 return 0644; 1417 break; 1418 1419 case hwmon_intrusion: 1420 return 0644; 1421 1422 default: /* Shouldn't happen */ 1423 return 0; 1424 } 1425 1426 return 0; /* Shouldn't happen */ 1427 } 1428 1429 static int 1430 w83627ehf_do_read_temp(struct w83627ehf_data *data, u32 attr, 1431 int channel, long *val) 1432 { 1433 switch (attr) { 1434 case hwmon_temp_input: 1435 *val = LM75_TEMP_FROM_REG(data->temp[channel]); 1436 return 0; 1437 case hwmon_temp_max: 1438 *val = LM75_TEMP_FROM_REG(data->temp_max[channel]); 1439 return 0; 1440 case hwmon_temp_max_hyst: 1441 *val = LM75_TEMP_FROM_REG(data->temp_max_hyst[channel]); 1442 return 0; 1443 case hwmon_temp_offset: 1444 *val = data->temp_offset[channel] * 1000; 1445 return 0; 1446 case hwmon_temp_type: 1447 *val = (int)data->temp_type[channel]; 1448 return 0; 1449 case hwmon_temp_alarm: 1450 if (channel < 3) { 1451 int bit[] = { 4, 5, 13 }; 1452 *val = (data->alarms >> bit[channel]) & 1; 1453 return 0; 1454 } 1455 break; 1456 1457 default: 1458 break; 1459 } 1460 1461 return -EOPNOTSUPP; 1462 } 1463 1464 static int 1465 w83627ehf_do_read_in(struct w83627ehf_data *data, u32 attr, 1466 int channel, long *val) 1467 { 1468 switch (attr) { 1469 case hwmon_in_input: 1470 *val = in_from_reg(data->in[channel], channel, data->scale_in); 1471 return 0; 1472 case hwmon_in_min: 1473 *val = in_from_reg(data->in_min[channel], channel, 1474 data->scale_in); 1475 return 0; 1476 case hwmon_in_max: 1477 *val = in_from_reg(data->in_max[channel], channel, 1478 data->scale_in); 1479 return 0; 1480 case hwmon_in_alarm: 1481 if (channel < 10) { 1482 int bit[] = { 0, 1, 2, 3, 8, 21, 20, 16, 17, 19 }; 1483 *val = (data->alarms >> bit[channel]) & 1; 1484 return 0; 1485 } 1486 break; 1487 default: 1488 break; 1489 } 1490 return -EOPNOTSUPP; 1491 } 1492 1493 static int 1494 w83627ehf_do_read_fan(struct w83627ehf_data *data, u32 attr, 1495 int channel, long *val) 1496 { 1497 switch (attr) { 1498 case hwmon_fan_input: 1499 *val = data->rpm[channel]; 1500 return 0; 1501 case hwmon_fan_min: 1502 *val = fan_from_reg8(data->fan_min[channel], 1503 data->fan_div[channel]); 1504 return 0; 1505 case hwmon_fan_div: 1506 *val = div_from_reg(data->fan_div[channel]); 1507 return 0; 1508 case hwmon_fan_alarm: 1509 if (channel < 5) { 1510 int bit[] = { 6, 7, 11, 10, 23 }; 1511 *val = (data->alarms >> bit[channel]) & 1; 1512 return 0; 1513 } 1514 break; 1515 default: 1516 break; 1517 } 1518 return -EOPNOTSUPP; 1519 } 1520 1521 static int 1522 w83627ehf_do_read_pwm(struct w83627ehf_data *data, u32 attr, 1523 int channel, long *val) 1524 { 1525 switch (attr) { 1526 case hwmon_pwm_input: 1527 *val = data->pwm[channel]; 1528 return 0; 1529 case hwmon_pwm_enable: 1530 *val = data->pwm_enable[channel]; 1531 return 0; 1532 case hwmon_pwm_mode: 1533 *val = data->pwm_enable[channel]; 1534 return 0; 1535 default: 1536 break; 1537 } 1538 return -EOPNOTSUPP; 1539 } 1540 1541 static int 1542 w83627ehf_do_read_intrusion(struct w83627ehf_data *data, u32 attr, 1543 int channel, long *val) 1544 { 1545 if (attr != hwmon_intrusion_alarm || channel != 0) 1546 return -EOPNOTSUPP; /* shouldn't happen */ 1547 1548 *val = !!(data->caseopen & 0x10); 1549 return 0; 1550 } 1551 1552 static int 1553 w83627ehf_read(struct device *dev, enum hwmon_sensor_types type, 1554 u32 attr, int channel, long *val) 1555 { 1556 struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); 1557 1558 switch (type) { 1559 case hwmon_fan: 1560 return w83627ehf_do_read_fan(data, attr, channel, val); 1561 1562 case hwmon_in: 1563 return w83627ehf_do_read_in(data, attr, channel, val); 1564 1565 case hwmon_pwm: 1566 return w83627ehf_do_read_pwm(data, attr, channel, val); 1567 1568 case hwmon_temp: 1569 return w83627ehf_do_read_temp(data, attr, channel, val); 1570 1571 case hwmon_intrusion: 1572 return w83627ehf_do_read_intrusion(data, attr, channel, val); 1573 1574 default: 1575 break; 1576 } 1577 1578 return -EOPNOTSUPP; 1579 } 1580 1581 static int 1582 w83627ehf_read_string(struct device *dev, enum hwmon_sensor_types type, 1583 u32 attr, int channel, const char **str) 1584 { 1585 struct w83627ehf_data *data = dev_get_drvdata(dev); 1586 1587 switch (type) { 1588 case hwmon_temp: 1589 if (attr == hwmon_temp_label) { 1590 *str = data->temp_label[data->temp_src[channel]]; 1591 return 0; 1592 } 1593 break; 1594 1595 default: 1596 break; 1597 } 1598 /* Nothing else should be read as a string */ 1599 return -EOPNOTSUPP; 1600 } 1601 1602 static int 1603 w83627ehf_write(struct device *dev, enum hwmon_sensor_types type, 1604 u32 attr, int channel, long val) 1605 { 1606 struct w83627ehf_data *data = dev_get_drvdata(dev); 1607 1608 if (type == hwmon_in && attr == hwmon_in_min) 1609 return store_in_min(dev, data, channel, val); 1610 if (type == hwmon_in && attr == hwmon_in_max) 1611 return store_in_max(dev, data, channel, val); 1612 1613 if (type == hwmon_fan && attr == hwmon_fan_min) 1614 return store_fan_min(dev, data, channel, val); 1615 1616 if (type == hwmon_temp && attr == hwmon_temp_max) 1617 return store_temp_max(dev, data, channel, val); 1618 if (type == hwmon_temp && attr == hwmon_temp_max_hyst) 1619 return store_temp_max_hyst(dev, data, channel, val); 1620 if (type == hwmon_temp && attr == hwmon_temp_offset) 1621 return store_temp_offset(dev, data, channel, val); 1622 1623 if (type == hwmon_pwm && attr == hwmon_pwm_mode) 1624 return store_pwm_mode(dev, data, channel, val); 1625 if (type == hwmon_pwm && attr == hwmon_pwm_enable) 1626 return store_pwm_enable(dev, data, channel, val); 1627 if (type == hwmon_pwm && attr == hwmon_pwm_input) 1628 return store_pwm(dev, data, channel, val); 1629 1630 if (type == hwmon_intrusion && attr == hwmon_intrusion_alarm) 1631 return clear_caseopen(dev, data, channel, val); 1632 1633 return -EOPNOTSUPP; 1634 } 1635 1636 static const struct hwmon_ops w83627ehf_ops = { 1637 .is_visible = w83627ehf_is_visible, 1638 .read = w83627ehf_read, 1639 .read_string = w83627ehf_read_string, 1640 .write = w83627ehf_write, 1641 }; 1642 1643 static const struct hwmon_channel_info *w83627ehf_info[] = { 1644 HWMON_CHANNEL_INFO(fan, 1645 HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN, 1646 HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN, 1647 HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN, 1648 HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN, 1649 HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN), 1650 HWMON_CHANNEL_INFO(in, 1651 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, 1652 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, 1653 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, 1654 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, 1655 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, 1656 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, 1657 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, 1658 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, 1659 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN, 1660 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN), 1661 HWMON_CHANNEL_INFO(pwm, 1662 HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE, 1663 HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE, 1664 HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE, 1665 HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE), 1666 HWMON_CHANNEL_INFO(temp, 1667 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | 1668 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, 1669 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | 1670 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, 1671 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | 1672 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, 1673 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | 1674 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, 1675 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | 1676 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, 1677 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | 1678 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, 1679 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | 1680 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, 1681 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | 1682 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE, 1683 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX | 1684 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE), 1685 HWMON_CHANNEL_INFO(intrusion, 1686 HWMON_INTRUSION_ALARM), 1687 NULL 1688 }; 1689 1690 static const struct hwmon_chip_info w83627ehf_chip_info = { 1691 .ops = &w83627ehf_ops, 1692 .info = w83627ehf_info, 1693 }; 1694 1695 static int __init w83627ehf_probe(struct platform_device *pdev) 1696 { 1697 struct device *dev = &pdev->dev; 1698 struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev); 1699 struct w83627ehf_data *data; 1700 struct resource *res; 1701 u8 en_vrm10; 1702 int i, err = 0; 1703 struct device *hwmon_dev; 1704 1705 res = platform_get_resource(pdev, IORESOURCE_IO, 0); 1706 if (!devm_request_region(dev, res->start, IOREGION_LENGTH, DRVNAME)) 1707 return -EBUSY; 1708 1709 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); 1710 if (!data) 1711 return -ENOMEM; 1712 1713 data->addr = res->start; 1714 mutex_init(&data->lock); 1715 mutex_init(&data->update_lock); 1716 data->name = w83627ehf_device_names[sio_data->kind]; 1717 data->bank = 0xff; /* Force initial bank selection */ 1718 platform_set_drvdata(pdev, data); 1719 1720 /* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */ 1721 data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9; 1722 /* 667HG has 3 pwms, and 627UHG has only 2 */ 1723 switch (sio_data->kind) { 1724 default: 1725 data->pwm_num = 4; 1726 break; 1727 case w83667hg: 1728 case w83667hg_b: 1729 data->pwm_num = 3; 1730 break; 1731 case w83627uhg: 1732 data->pwm_num = 2; 1733 break; 1734 } 1735 1736 /* Default to 3 temperature inputs, code below will adjust as needed */ 1737 data->have_temp = 0x07; 1738 1739 /* Deal with temperature register setup first. */ 1740 if (sio_data->kind == w83667hg_b) { 1741 u8 reg; 1742 1743 w83627ehf_set_temp_reg_ehf(data, 4); 1744 1745 /* 1746 * Temperature sources are selected with bank 0, registers 0x49 1747 * and 0x4a. 1748 */ 1749 reg = w83627ehf_read_value(data, 0x4a); 1750 data->temp_src[0] = reg >> 5; 1751 reg = w83627ehf_read_value(data, 0x49); 1752 data->temp_src[1] = reg & 0x07; 1753 data->temp_src[2] = (reg >> 4) & 0x07; 1754 1755 /* 1756 * W83667HG-B has another temperature register at 0x7e. 1757 * The temperature source is selected with register 0x7d. 1758 * Support it if the source differs from already reported 1759 * sources. 1760 */ 1761 reg = w83627ehf_read_value(data, 0x7d); 1762 reg &= 0x07; 1763 if (reg != data->temp_src[0] && reg != data->temp_src[1] 1764 && reg != data->temp_src[2]) { 1765 data->temp_src[3] = reg; 1766 data->have_temp |= 1 << 3; 1767 } 1768 1769 /* 1770 * Chip supports either AUXTIN or VIN3. Try to find out which 1771 * one. 1772 */ 1773 reg = w83627ehf_read_value(data, W83627EHF_REG_TEMP_CONFIG[2]); 1774 if (data->temp_src[2] == 2 && (reg & 0x01)) 1775 data->have_temp &= ~(1 << 2); 1776 1777 if ((data->temp_src[2] == 2 && (data->have_temp & (1 << 2))) 1778 || (data->temp_src[3] == 2 && (data->have_temp & (1 << 3)))) 1779 data->in6_skip = 1; 1780 1781 data->temp_label = w83667hg_b_temp_label; 1782 data->have_temp_offset = data->have_temp & 0x07; 1783 for (i = 0; i < 3; i++) { 1784 if (data->temp_src[i] > 2) 1785 data->have_temp_offset &= ~(1 << i); 1786 } 1787 } else if (sio_data->kind == w83627uhg) { 1788 u8 reg; 1789 1790 w83627ehf_set_temp_reg_ehf(data, 3); 1791 1792 /* 1793 * Temperature sources for temp2 and temp3 are selected with 1794 * bank 0, registers 0x49 and 0x4a. 1795 */ 1796 data->temp_src[0] = 0; /* SYSTIN */ 1797 reg = w83627ehf_read_value(data, 0x49) & 0x07; 1798 /* Adjust to have the same mapping as other source registers */ 1799 if (reg == 0) 1800 data->temp_src[1] = 1; 1801 else if (reg >= 2 && reg <= 5) 1802 data->temp_src[1] = reg + 2; 1803 else /* should never happen */ 1804 data->have_temp &= ~(1 << 1); 1805 reg = w83627ehf_read_value(data, 0x4a); 1806 data->temp_src[2] = reg >> 5; 1807 1808 /* 1809 * Skip temp3 if source is invalid or the same as temp1 1810 * or temp2. 1811 */ 1812 if (data->temp_src[2] == 2 || data->temp_src[2] == 3 || 1813 data->temp_src[2] == data->temp_src[0] || 1814 ((data->have_temp & (1 << 1)) && 1815 data->temp_src[2] == data->temp_src[1])) 1816 data->have_temp &= ~(1 << 2); 1817 else 1818 data->temp3_val_only = 1; /* No limit regs */ 1819 1820 data->in6_skip = 1; /* No VIN3 */ 1821 1822 data->temp_label = w83667hg_b_temp_label; 1823 data->have_temp_offset = data->have_temp & 0x03; 1824 for (i = 0; i < 3; i++) { 1825 if (data->temp_src[i] > 1) 1826 data->have_temp_offset &= ~(1 << i); 1827 } 1828 } else { 1829 w83627ehf_set_temp_reg_ehf(data, 3); 1830 1831 /* Temperature sources are fixed */ 1832 1833 if (sio_data->kind == w83667hg) { 1834 u8 reg; 1835 1836 /* 1837 * Chip supports either AUXTIN or VIN3. Try to find 1838 * out which one. 1839 */ 1840 reg = w83627ehf_read_value(data, 1841 W83627EHF_REG_TEMP_CONFIG[2]); 1842 if (reg & 0x01) 1843 data->have_temp &= ~(1 << 2); 1844 else 1845 data->in6_skip = 1; 1846 } 1847 data->have_temp_offset = data->have_temp & 0x07; 1848 } 1849 1850 if (sio_data->kind == w83667hg_b) { 1851 data->REG_FAN_MAX_OUTPUT = 1852 W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B; 1853 data->REG_FAN_STEP_OUTPUT = 1854 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B; 1855 } else { 1856 data->REG_FAN_MAX_OUTPUT = 1857 W83627EHF_REG_FAN_MAX_OUTPUT_COMMON; 1858 data->REG_FAN_STEP_OUTPUT = 1859 W83627EHF_REG_FAN_STEP_OUTPUT_COMMON; 1860 } 1861 1862 /* Setup input voltage scaling factors */ 1863 if (sio_data->kind == w83627uhg) 1864 data->scale_in = scale_in_w83627uhg; 1865 else 1866 data->scale_in = scale_in_common; 1867 1868 /* Initialize the chip */ 1869 w83627ehf_init_device(data, sio_data->kind); 1870 1871 data->vrm = vid_which_vrm(); 1872 1873 err = superio_enter(sio_data->sioreg); 1874 if (err) 1875 return err; 1876 1877 /* Read VID value */ 1878 if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) { 1879 /* 1880 * W83667HG has different pins for VID input and output, so 1881 * we can get the VID input values directly at logical device D 1882 * 0xe3. 1883 */ 1884 superio_select(sio_data->sioreg, W83667HG_LD_VID); 1885 data->vid = superio_inb(sio_data->sioreg, 0xe3); 1886 data->have_vid = true; 1887 } else if (sio_data->kind != w83627uhg) { 1888 superio_select(sio_data->sioreg, W83627EHF_LD_HWM); 1889 if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) { 1890 /* 1891 * Set VID input sensibility if needed. In theory the 1892 * BIOS should have set it, but in practice it's not 1893 * always the case. We only do it for the W83627EHF/EHG 1894 * because the W83627DHG is more complex in this 1895 * respect. 1896 */ 1897 if (sio_data->kind == w83627ehf) { 1898 en_vrm10 = superio_inb(sio_data->sioreg, 1899 SIO_REG_EN_VRM10); 1900 if ((en_vrm10 & 0x08) && data->vrm == 90) { 1901 dev_warn(dev, 1902 "Setting VID input voltage to TTL\n"); 1903 superio_outb(sio_data->sioreg, 1904 SIO_REG_EN_VRM10, 1905 en_vrm10 & ~0x08); 1906 } else if (!(en_vrm10 & 0x08) 1907 && data->vrm == 100) { 1908 dev_warn(dev, 1909 "Setting VID input voltage to VRM10\n"); 1910 superio_outb(sio_data->sioreg, 1911 SIO_REG_EN_VRM10, 1912 en_vrm10 | 0x08); 1913 } 1914 } 1915 1916 data->vid = superio_inb(sio_data->sioreg, 1917 SIO_REG_VID_DATA); 1918 if (sio_data->kind == w83627ehf) /* 6 VID pins only */ 1919 data->vid &= 0x3f; 1920 data->have_vid = true; 1921 } else { 1922 dev_info(dev, 1923 "VID pins in output mode, CPU VID not available\n"); 1924 } 1925 } 1926 1927 w83627ehf_check_fan_inputs(sio_data, data); 1928 1929 superio_exit(sio_data->sioreg); 1930 1931 /* Read fan clock dividers immediately */ 1932 w83627ehf_update_fan_div(data); 1933 1934 /* Read pwm data to save original values */ 1935 w83627ehf_update_pwm(data); 1936 for (i = 0; i < data->pwm_num; i++) 1937 data->pwm_enable_orig[i] = data->pwm_enable[i]; 1938 1939 hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, 1940 data->name, 1941 data, 1942 &w83627ehf_chip_info, 1943 w83627ehf_groups); 1944 return PTR_ERR_OR_ZERO(hwmon_dev); 1945 } 1946 1947 static int __maybe_unused w83627ehf_suspend(struct device *dev) 1948 { 1949 struct w83627ehf_data *data = w83627ehf_update_device(dev); 1950 1951 mutex_lock(&data->update_lock); 1952 data->vbat = w83627ehf_read_value(data, W83627EHF_REG_VBAT); 1953 mutex_unlock(&data->update_lock); 1954 1955 return 0; 1956 } 1957 1958 static int __maybe_unused w83627ehf_resume(struct device *dev) 1959 { 1960 struct w83627ehf_data *data = dev_get_drvdata(dev); 1961 int i; 1962 1963 mutex_lock(&data->update_lock); 1964 data->bank = 0xff; /* Force initial bank selection */ 1965 1966 /* Restore limits */ 1967 for (i = 0; i < data->in_num; i++) { 1968 if ((i == 6) && data->in6_skip) 1969 continue; 1970 1971 w83627ehf_write_value(data, W83627EHF_REG_IN_MIN(i), 1972 data->in_min[i]); 1973 w83627ehf_write_value(data, W83627EHF_REG_IN_MAX(i), 1974 data->in_max[i]); 1975 } 1976 1977 for (i = 0; i < 5; i++) { 1978 if (!(data->has_fan_min & (1 << i))) 1979 continue; 1980 1981 w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[i], 1982 data->fan_min[i]); 1983 } 1984 1985 for (i = 0; i < NUM_REG_TEMP; i++) { 1986 if (!(data->have_temp & (1 << i))) 1987 continue; 1988 1989 if (data->reg_temp_over[i]) 1990 w83627ehf_write_temp(data, data->reg_temp_over[i], 1991 data->temp_max[i]); 1992 if (data->reg_temp_hyst[i]) 1993 w83627ehf_write_temp(data, data->reg_temp_hyst[i], 1994 data->temp_max_hyst[i]); 1995 if (i > 2) 1996 continue; 1997 if (data->have_temp_offset & (1 << i)) 1998 w83627ehf_write_value(data, 1999 W83627EHF_REG_TEMP_OFFSET[i], 2000 data->temp_offset[i]); 2001 } 2002 2003 /* Restore other settings */ 2004 w83627ehf_write_value(data, W83627EHF_REG_VBAT, data->vbat); 2005 2006 /* Force re-reading all values */ 2007 data->valid = 0; 2008 mutex_unlock(&data->update_lock); 2009 2010 return 0; 2011 } 2012 2013 static SIMPLE_DEV_PM_OPS(w83627ehf_dev_pm_ops, w83627ehf_suspend, w83627ehf_resume); 2014 2015 static struct platform_driver w83627ehf_driver = { 2016 .driver = { 2017 .name = DRVNAME, 2018 .pm = &w83627ehf_dev_pm_ops, 2019 }, 2020 }; 2021 2022 /* w83627ehf_find() looks for a '627 in the Super-I/O config space */ 2023 static int __init w83627ehf_find(int sioaddr, unsigned short *addr, 2024 struct w83627ehf_sio_data *sio_data) 2025 { 2026 static const char sio_name_W83627EHF[] __initconst = "W83627EHF"; 2027 static const char sio_name_W83627EHG[] __initconst = "W83627EHG"; 2028 static const char sio_name_W83627DHG[] __initconst = "W83627DHG"; 2029 static const char sio_name_W83627DHG_P[] __initconst = "W83627DHG-P"; 2030 static const char sio_name_W83627UHG[] __initconst = "W83627UHG"; 2031 static const char sio_name_W83667HG[] __initconst = "W83667HG"; 2032 static const char sio_name_W83667HG_B[] __initconst = "W83667HG-B"; 2033 2034 u16 val; 2035 const char *sio_name; 2036 int err; 2037 2038 err = superio_enter(sioaddr); 2039 if (err) 2040 return err; 2041 2042 if (force_id) 2043 val = force_id; 2044 else 2045 val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8) 2046 | superio_inb(sioaddr, SIO_REG_DEVID + 1); 2047 switch (val & SIO_ID_MASK) { 2048 case SIO_W83627EHF_ID: 2049 sio_data->kind = w83627ehf; 2050 sio_name = sio_name_W83627EHF; 2051 break; 2052 case SIO_W83627EHG_ID: 2053 sio_data->kind = w83627ehf; 2054 sio_name = sio_name_W83627EHG; 2055 break; 2056 case SIO_W83627DHG_ID: 2057 sio_data->kind = w83627dhg; 2058 sio_name = sio_name_W83627DHG; 2059 break; 2060 case SIO_W83627DHG_P_ID: 2061 sio_data->kind = w83627dhg_p; 2062 sio_name = sio_name_W83627DHG_P; 2063 break; 2064 case SIO_W83627UHG_ID: 2065 sio_data->kind = w83627uhg; 2066 sio_name = sio_name_W83627UHG; 2067 break; 2068 case SIO_W83667HG_ID: 2069 sio_data->kind = w83667hg; 2070 sio_name = sio_name_W83667HG; 2071 break; 2072 case SIO_W83667HG_B_ID: 2073 sio_data->kind = w83667hg_b; 2074 sio_name = sio_name_W83667HG_B; 2075 break; 2076 default: 2077 if (val != 0xffff) 2078 pr_debug("unsupported chip ID: 0x%04x\n", val); 2079 superio_exit(sioaddr); 2080 return -ENODEV; 2081 } 2082 2083 /* We have a known chip, find the HWM I/O address */ 2084 superio_select(sioaddr, W83627EHF_LD_HWM); 2085 val = (superio_inb(sioaddr, SIO_REG_ADDR) << 8) 2086 | superio_inb(sioaddr, SIO_REG_ADDR + 1); 2087 *addr = val & IOREGION_ALIGNMENT; 2088 if (*addr == 0) { 2089 pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n"); 2090 superio_exit(sioaddr); 2091 return -ENODEV; 2092 } 2093 2094 /* Activate logical device if needed */ 2095 val = superio_inb(sioaddr, SIO_REG_ENABLE); 2096 if (!(val & 0x01)) { 2097 pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n"); 2098 superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01); 2099 } 2100 2101 superio_exit(sioaddr); 2102 pr_info("Found %s chip at %#x\n", sio_name, *addr); 2103 sio_data->sioreg = sioaddr; 2104 2105 return 0; 2106 } 2107 2108 /* 2109 * when Super-I/O functions move to a separate file, the Super-I/O 2110 * bus will manage the lifetime of the device and this module will only keep 2111 * track of the w83627ehf driver. 2112 */ 2113 static struct platform_device *pdev; 2114 2115 static int __init sensors_w83627ehf_init(void) 2116 { 2117 int err; 2118 unsigned short address; 2119 struct resource res = { 2120 .name = DRVNAME, 2121 .flags = IORESOURCE_IO, 2122 }; 2123 struct w83627ehf_sio_data sio_data; 2124 2125 /* 2126 * initialize sio_data->kind and sio_data->sioreg. 2127 * 2128 * when Super-I/O functions move to a separate file, the Super-I/O 2129 * driver will probe 0x2e and 0x4e and auto-detect the presence of a 2130 * w83627ehf hardware monitor, and call probe() 2131 */ 2132 if (w83627ehf_find(0x2e, &address, &sio_data) && 2133 w83627ehf_find(0x4e, &address, &sio_data)) 2134 return -ENODEV; 2135 2136 res.start = address + IOREGION_OFFSET; 2137 res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; 2138 2139 err = acpi_check_resource_conflict(&res); 2140 if (err) 2141 return err; 2142 2143 pdev = platform_create_bundle(&w83627ehf_driver, w83627ehf_probe, &res, 1, &sio_data, 2144 sizeof(struct w83627ehf_sio_data)); 2145 2146 return PTR_ERR_OR_ZERO(pdev); 2147 } 2148 2149 static void __exit sensors_w83627ehf_exit(void) 2150 { 2151 platform_device_unregister(pdev); 2152 platform_driver_unregister(&w83627ehf_driver); 2153 } 2154 2155 MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); 2156 MODULE_DESCRIPTION("W83627EHF driver"); 2157 MODULE_LICENSE("GPL"); 2158 2159 module_init(sensors_w83627ehf_init); 2160 module_exit(sensors_w83627ehf_exit); 2161