xref: /openbmc/linux/drivers/hwmon/tmp401.c (revision f3a8b664)
1 /* tmp401.c
2  *
3  * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
4  * Preliminary tmp411 support by:
5  * Gabriel Konat, Sander Leget, Wouter Willems
6  * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
7  *
8  * Cleanup and support for TMP431 and TMP432 by Guenter Roeck
9  * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License, or
14  * (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24  */
25 
26 /*
27  * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC.
28  *
29  * Note this IC is in some aspect similar to the LM90, but it has quite a
30  * few differences too, for example the local temp has a higher resolution
31  * and thus has 16 bits registers for its value and limit instead of 8 bits.
32  */
33 
34 #include <linux/module.h>
35 #include <linux/init.h>
36 #include <linux/bitops.h>
37 #include <linux/slab.h>
38 #include <linux/jiffies.h>
39 #include <linux/i2c.h>
40 #include <linux/hwmon.h>
41 #include <linux/hwmon-sysfs.h>
42 #include <linux/err.h>
43 #include <linux/mutex.h>
44 #include <linux/sysfs.h>
45 
46 /* Addresses to scan */
47 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, 0x4d,
48 	0x4e, 0x4f, I2C_CLIENT_END };
49 
50 enum chips { tmp401, tmp411, tmp431, tmp432, tmp435, tmp461 };
51 
52 /*
53  * The TMP401 registers, note some registers have different addresses for
54  * reading and writing
55  */
56 #define TMP401_STATUS				0x02
57 #define TMP401_CONFIG_READ			0x03
58 #define TMP401_CONFIG_WRITE			0x09
59 #define TMP401_CONVERSION_RATE_READ		0x04
60 #define TMP401_CONVERSION_RATE_WRITE		0x0A
61 #define TMP401_TEMP_CRIT_HYST			0x21
62 #define TMP401_MANUFACTURER_ID_REG		0xFE
63 #define TMP401_DEVICE_ID_REG			0xFF
64 
65 static const u8 TMP401_TEMP_MSB_READ[7][2] = {
66 	{ 0x00, 0x01 },	/* temp */
67 	{ 0x06, 0x08 },	/* low limit */
68 	{ 0x05, 0x07 },	/* high limit */
69 	{ 0x20, 0x19 },	/* therm (crit) limit */
70 	{ 0x30, 0x34 },	/* lowest */
71 	{ 0x32, 0x36 },	/* highest */
72 	{ 0, 0x11 },	/* offset */
73 };
74 
75 static const u8 TMP401_TEMP_MSB_WRITE[7][2] = {
76 	{ 0, 0 },	/* temp (unused) */
77 	{ 0x0C, 0x0E },	/* low limit */
78 	{ 0x0B, 0x0D },	/* high limit */
79 	{ 0x20, 0x19 },	/* therm (crit) limit */
80 	{ 0x30, 0x34 },	/* lowest */
81 	{ 0x32, 0x36 },	/* highest */
82 	{ 0, 0x11 },	/* offset */
83 };
84 
85 static const u8 TMP401_TEMP_LSB[7][2] = {
86 	{ 0x15, 0x10 },	/* temp */
87 	{ 0x17, 0x14 },	/* low limit */
88 	{ 0x16, 0x13 },	/* high limit */
89 	{ 0, 0 },	/* therm (crit) limit (unused) */
90 	{ 0x31, 0x35 },	/* lowest */
91 	{ 0x33, 0x37 },	/* highest */
92 	{ 0, 0x12 },	/* offset */
93 };
94 
95 static const u8 TMP432_TEMP_MSB_READ[4][3] = {
96 	{ 0x00, 0x01, 0x23 },	/* temp */
97 	{ 0x06, 0x08, 0x16 },	/* low limit */
98 	{ 0x05, 0x07, 0x15 },	/* high limit */
99 	{ 0x20, 0x19, 0x1A },	/* therm (crit) limit */
100 };
101 
102 static const u8 TMP432_TEMP_MSB_WRITE[4][3] = {
103 	{ 0, 0, 0 },		/* temp  - unused */
104 	{ 0x0C, 0x0E, 0x16 },	/* low limit */
105 	{ 0x0B, 0x0D, 0x15 },	/* high limit */
106 	{ 0x20, 0x19, 0x1A },	/* therm (crit) limit */
107 };
108 
109 static const u8 TMP432_TEMP_LSB[3][3] = {
110 	{ 0x29, 0x10, 0x24 },	/* temp */
111 	{ 0x3E, 0x14, 0x18 },	/* low limit */
112 	{ 0x3D, 0x13, 0x17 },	/* high limit */
113 };
114 
115 /* [0] = fault, [1] = low, [2] = high, [3] = therm/crit */
116 static const u8 TMP432_STATUS_REG[] = {
117 	0x1b, 0x36, 0x35, 0x37 };
118 
119 /* Flags */
120 #define TMP401_CONFIG_RANGE			BIT(2)
121 #define TMP401_CONFIG_SHUTDOWN			BIT(6)
122 #define TMP401_STATUS_LOCAL_CRIT		BIT(0)
123 #define TMP401_STATUS_REMOTE_CRIT		BIT(1)
124 #define TMP401_STATUS_REMOTE_OPEN		BIT(2)
125 #define TMP401_STATUS_REMOTE_LOW		BIT(3)
126 #define TMP401_STATUS_REMOTE_HIGH		BIT(4)
127 #define TMP401_STATUS_LOCAL_LOW			BIT(5)
128 #define TMP401_STATUS_LOCAL_HIGH		BIT(6)
129 
130 /* On TMP432, each status has its own register */
131 #define TMP432_STATUS_LOCAL			BIT(0)
132 #define TMP432_STATUS_REMOTE1			BIT(1)
133 #define TMP432_STATUS_REMOTE2			BIT(2)
134 
135 /* Manufacturer / Device ID's */
136 #define TMP401_MANUFACTURER_ID			0x55
137 #define TMP401_DEVICE_ID			0x11
138 #define TMP411A_DEVICE_ID			0x12
139 #define TMP411B_DEVICE_ID			0x13
140 #define TMP411C_DEVICE_ID			0x10
141 #define TMP431_DEVICE_ID			0x31
142 #define TMP432_DEVICE_ID			0x32
143 #define TMP435_DEVICE_ID			0x35
144 
145 /*
146  * Driver data (common to all clients)
147  */
148 
149 static const struct i2c_device_id tmp401_id[] = {
150 	{ "tmp401", tmp401 },
151 	{ "tmp411", tmp411 },
152 	{ "tmp431", tmp431 },
153 	{ "tmp432", tmp432 },
154 	{ "tmp435", tmp435 },
155 	{ "tmp461", tmp461 },
156 	{ }
157 };
158 MODULE_DEVICE_TABLE(i2c, tmp401_id);
159 
160 /*
161  * Client data (each client gets its own)
162  */
163 
164 struct tmp401_data {
165 	struct i2c_client *client;
166 	const struct attribute_group *groups[3];
167 	struct mutex update_lock;
168 	char valid; /* zero until following fields are valid */
169 	unsigned long last_updated; /* in jiffies */
170 	enum chips kind;
171 
172 	unsigned int update_interval;	/* in milliseconds */
173 
174 	/* register values */
175 	u8 status[4];
176 	u8 config;
177 	u16 temp[7][3];
178 	u8 temp_crit_hyst;
179 };
180 
181 /*
182  * Sysfs attr show / store functions
183  */
184 
185 static int tmp401_register_to_temp(u16 reg, u8 config)
186 {
187 	int temp = reg;
188 
189 	if (config & TMP401_CONFIG_RANGE)
190 		temp -= 64 * 256;
191 
192 	return DIV_ROUND_CLOSEST(temp * 125, 32);
193 }
194 
195 static u16 tmp401_temp_to_register(long temp, u8 config, int zbits)
196 {
197 	if (config & TMP401_CONFIG_RANGE) {
198 		temp = clamp_val(temp, -64000, 191000);
199 		temp += 64000;
200 	} else
201 		temp = clamp_val(temp, 0, 127000);
202 
203 	return DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits;
204 }
205 
206 static int tmp401_update_device_reg16(struct i2c_client *client,
207 				      struct tmp401_data *data)
208 {
209 	int i, j, val;
210 	int num_regs = data->kind == tmp411 ? 6 : 4;
211 	int num_sensors = data->kind == tmp432 ? 3 : 2;
212 
213 	for (i = 0; i < num_sensors; i++) {		/* local / r1 / r2 */
214 		for (j = 0; j < num_regs; j++) {	/* temp / low / ... */
215 			u8 regaddr;
216 			/*
217 			 * High byte must be read first immediately followed
218 			 * by the low byte
219 			 */
220 			regaddr = data->kind == tmp432 ?
221 						TMP432_TEMP_MSB_READ[j][i] :
222 						TMP401_TEMP_MSB_READ[j][i];
223 			val = i2c_smbus_read_byte_data(client, regaddr);
224 			if (val < 0)
225 				return val;
226 			data->temp[j][i] = val << 8;
227 			if (j == 3)		/* crit is msb only */
228 				continue;
229 			regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[j][i]
230 						       : TMP401_TEMP_LSB[j][i];
231 			val = i2c_smbus_read_byte_data(client, regaddr);
232 			if (val < 0)
233 				return val;
234 			data->temp[j][i] |= val;
235 		}
236 	}
237 	return 0;
238 }
239 
240 static struct tmp401_data *tmp401_update_device(struct device *dev)
241 {
242 	struct tmp401_data *data = dev_get_drvdata(dev);
243 	struct i2c_client *client = data->client;
244 	struct tmp401_data *ret = data;
245 	int i, val;
246 	unsigned long next_update;
247 
248 	mutex_lock(&data->update_lock);
249 
250 	next_update = data->last_updated +
251 		      msecs_to_jiffies(data->update_interval);
252 	if (time_after(jiffies, next_update) || !data->valid) {
253 		if (data->kind != tmp432) {
254 			/*
255 			 * The driver uses the TMP432 status format internally.
256 			 * Convert status to TMP432 format for other chips.
257 			 */
258 			val = i2c_smbus_read_byte_data(client, TMP401_STATUS);
259 			if (val < 0) {
260 				ret = ERR_PTR(val);
261 				goto abort;
262 			}
263 			data->status[0] =
264 			  (val & TMP401_STATUS_REMOTE_OPEN) >> 1;
265 			data->status[1] =
266 			  ((val & TMP401_STATUS_REMOTE_LOW) >> 2) |
267 			  ((val & TMP401_STATUS_LOCAL_LOW) >> 5);
268 			data->status[2] =
269 			  ((val & TMP401_STATUS_REMOTE_HIGH) >> 3) |
270 			  ((val & TMP401_STATUS_LOCAL_HIGH) >> 6);
271 			data->status[3] = val & (TMP401_STATUS_LOCAL_CRIT
272 						| TMP401_STATUS_REMOTE_CRIT);
273 		} else {
274 			for (i = 0; i < ARRAY_SIZE(data->status); i++) {
275 				val = i2c_smbus_read_byte_data(client,
276 							TMP432_STATUS_REG[i]);
277 				if (val < 0) {
278 					ret = ERR_PTR(val);
279 					goto abort;
280 				}
281 				data->status[i] = val;
282 			}
283 		}
284 
285 		val = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
286 		if (val < 0) {
287 			ret = ERR_PTR(val);
288 			goto abort;
289 		}
290 		data->config = val;
291 		val = tmp401_update_device_reg16(client, data);
292 		if (val < 0) {
293 			ret = ERR_PTR(val);
294 			goto abort;
295 		}
296 		val = i2c_smbus_read_byte_data(client, TMP401_TEMP_CRIT_HYST);
297 		if (val < 0) {
298 			ret = ERR_PTR(val);
299 			goto abort;
300 		}
301 		data->temp_crit_hyst = val;
302 
303 		data->last_updated = jiffies;
304 		data->valid = 1;
305 	}
306 
307 abort:
308 	mutex_unlock(&data->update_lock);
309 	return ret;
310 }
311 
312 static ssize_t show_temp(struct device *dev,
313 			 struct device_attribute *devattr, char *buf)
314 {
315 	int nr = to_sensor_dev_attr_2(devattr)->nr;
316 	int index = to_sensor_dev_attr_2(devattr)->index;
317 	struct tmp401_data *data = tmp401_update_device(dev);
318 
319 	if (IS_ERR(data))
320 		return PTR_ERR(data);
321 
322 	return sprintf(buf, "%d\n",
323 		tmp401_register_to_temp(data->temp[nr][index], data->config));
324 }
325 
326 static ssize_t show_temp_crit_hyst(struct device *dev,
327 	struct device_attribute *devattr, char *buf)
328 {
329 	int temp, index = to_sensor_dev_attr(devattr)->index;
330 	struct tmp401_data *data = tmp401_update_device(dev);
331 
332 	if (IS_ERR(data))
333 		return PTR_ERR(data);
334 
335 	mutex_lock(&data->update_lock);
336 	temp = tmp401_register_to_temp(data->temp[3][index], data->config);
337 	temp -= data->temp_crit_hyst * 1000;
338 	mutex_unlock(&data->update_lock);
339 
340 	return sprintf(buf, "%d\n", temp);
341 }
342 
343 static ssize_t show_status(struct device *dev,
344 	struct device_attribute *devattr, char *buf)
345 {
346 	int nr = to_sensor_dev_attr_2(devattr)->nr;
347 	int mask = to_sensor_dev_attr_2(devattr)->index;
348 	struct tmp401_data *data = tmp401_update_device(dev);
349 
350 	if (IS_ERR(data))
351 		return PTR_ERR(data);
352 
353 	return sprintf(buf, "%d\n", !!(data->status[nr] & mask));
354 }
355 
356 static ssize_t store_temp(struct device *dev, struct device_attribute *devattr,
357 			  const char *buf, size_t count)
358 {
359 	int nr = to_sensor_dev_attr_2(devattr)->nr;
360 	int index = to_sensor_dev_attr_2(devattr)->index;
361 	struct tmp401_data *data = dev_get_drvdata(dev);
362 	struct i2c_client *client = data->client;
363 	long val;
364 	u16 reg;
365 	u8 regaddr;
366 
367 	if (kstrtol(buf, 10, &val))
368 		return -EINVAL;
369 
370 	reg = tmp401_temp_to_register(val, data->config, nr == 3 ? 8 : 4);
371 
372 	mutex_lock(&data->update_lock);
373 
374 	regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_WRITE[nr][index]
375 				       : TMP401_TEMP_MSB_WRITE[nr][index];
376 	i2c_smbus_write_byte_data(client, regaddr, reg >> 8);
377 	if (nr != 3) {
378 		regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[nr][index]
379 					       : TMP401_TEMP_LSB[nr][index];
380 		i2c_smbus_write_byte_data(client, regaddr, reg & 0xFF);
381 	}
382 	data->temp[nr][index] = reg;
383 
384 	mutex_unlock(&data->update_lock);
385 
386 	return count;
387 }
388 
389 static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute
390 	*devattr, const char *buf, size_t count)
391 {
392 	int temp, index = to_sensor_dev_attr(devattr)->index;
393 	struct tmp401_data *data = tmp401_update_device(dev);
394 	long val;
395 	u8 reg;
396 
397 	if (IS_ERR(data))
398 		return PTR_ERR(data);
399 
400 	if (kstrtol(buf, 10, &val))
401 		return -EINVAL;
402 
403 	if (data->config & TMP401_CONFIG_RANGE)
404 		val = clamp_val(val, -64000, 191000);
405 	else
406 		val = clamp_val(val, 0, 127000);
407 
408 	mutex_lock(&data->update_lock);
409 	temp = tmp401_register_to_temp(data->temp[3][index], data->config);
410 	val = clamp_val(val, temp - 255000, temp);
411 	reg = ((temp - val) + 500) / 1000;
412 
413 	i2c_smbus_write_byte_data(data->client, TMP401_TEMP_CRIT_HYST,
414 				  reg);
415 
416 	data->temp_crit_hyst = reg;
417 
418 	mutex_unlock(&data->update_lock);
419 
420 	return count;
421 }
422 
423 /*
424  * Resets the historical measurements of minimum and maximum temperatures.
425  * This is done by writing any value to any of the minimum/maximum registers
426  * (0x30-0x37).
427  */
428 static ssize_t reset_temp_history(struct device *dev,
429 	struct device_attribute	*devattr, const char *buf, size_t count)
430 {
431 	struct tmp401_data *data = dev_get_drvdata(dev);
432 	struct i2c_client *client = data->client;
433 	long val;
434 
435 	if (kstrtol(buf, 10, &val))
436 		return -EINVAL;
437 
438 	if (val != 1) {
439 		dev_err(dev,
440 			"temp_reset_history value %ld not supported. Use 1 to reset the history!\n",
441 			val);
442 		return -EINVAL;
443 	}
444 	mutex_lock(&data->update_lock);
445 	i2c_smbus_write_byte_data(client, TMP401_TEMP_MSB_WRITE[5][0], val);
446 	data->valid = 0;
447 	mutex_unlock(&data->update_lock);
448 
449 	return count;
450 }
451 
452 static ssize_t show_update_interval(struct device *dev,
453 				    struct device_attribute *attr, char *buf)
454 {
455 	struct tmp401_data *data = dev_get_drvdata(dev);
456 
457 	return sprintf(buf, "%u\n", data->update_interval);
458 }
459 
460 static ssize_t set_update_interval(struct device *dev,
461 				   struct device_attribute *attr,
462 				   const char *buf, size_t count)
463 {
464 	struct tmp401_data *data = dev_get_drvdata(dev);
465 	struct i2c_client *client = data->client;
466 	unsigned long val;
467 	int err, rate;
468 
469 	err = kstrtoul(buf, 10, &val);
470 	if (err)
471 		return err;
472 
473 	/*
474 	 * For valid rates, interval can be calculated as
475 	 *	interval = (1 << (7 - rate)) * 125;
476 	 * Rounded rate is therefore
477 	 *	rate = 7 - __fls(interval * 4 / (125 * 3));
478 	 * Use clamp_val() to avoid overflows, and to ensure valid input
479 	 * for __fls.
480 	 */
481 	val = clamp_val(val, 125, 16000);
482 	rate = 7 - __fls(val * 4 / (125 * 3));
483 	mutex_lock(&data->update_lock);
484 	i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, rate);
485 	data->update_interval = (1 << (7 - rate)) * 125;
486 	mutex_unlock(&data->update_lock);
487 
488 	return count;
489 }
490 
491 static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
492 static SENSOR_DEVICE_ATTR_2(temp1_min, S_IWUSR | S_IRUGO, show_temp,
493 			    store_temp, 1, 0);
494 static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp,
495 			    store_temp, 2, 0);
496 static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IWUSR | S_IRUGO, show_temp,
497 			    store_temp, 3, 0);
498 static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
499 			  show_temp_crit_hyst, store_temp_crit_hyst, 0);
500 static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO, show_status, NULL,
501 			    1, TMP432_STATUS_LOCAL);
502 static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO, show_status, NULL,
503 			    2, TMP432_STATUS_LOCAL);
504 static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, show_status, NULL,
505 			    3, TMP432_STATUS_LOCAL);
506 static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1);
507 static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp,
508 			    store_temp, 1, 1);
509 static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp,
510 			    store_temp, 2, 1);
511 static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IWUSR | S_IRUGO, show_temp,
512 			    store_temp, 3, 1);
513 static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst,
514 			  NULL, 1);
515 static SENSOR_DEVICE_ATTR_2(temp2_fault, S_IRUGO, show_status, NULL,
516 			    0, TMP432_STATUS_REMOTE1);
517 static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO, show_status, NULL,
518 			    1, TMP432_STATUS_REMOTE1);
519 static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO, show_status, NULL,
520 			    2, TMP432_STATUS_REMOTE1);
521 static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO, show_status, NULL,
522 			    3, TMP432_STATUS_REMOTE1);
523 
524 static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
525 		   set_update_interval);
526 
527 static struct attribute *tmp401_attributes[] = {
528 	&sensor_dev_attr_temp1_input.dev_attr.attr,
529 	&sensor_dev_attr_temp1_min.dev_attr.attr,
530 	&sensor_dev_attr_temp1_max.dev_attr.attr,
531 	&sensor_dev_attr_temp1_crit.dev_attr.attr,
532 	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
533 	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
534 	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
535 	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
536 
537 	&sensor_dev_attr_temp2_input.dev_attr.attr,
538 	&sensor_dev_attr_temp2_min.dev_attr.attr,
539 	&sensor_dev_attr_temp2_max.dev_attr.attr,
540 	&sensor_dev_attr_temp2_crit.dev_attr.attr,
541 	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
542 	&sensor_dev_attr_temp2_fault.dev_attr.attr,
543 	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
544 	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
545 	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
546 
547 	&dev_attr_update_interval.attr,
548 
549 	NULL
550 };
551 
552 static const struct attribute_group tmp401_group = {
553 	.attrs = tmp401_attributes,
554 };
555 
556 /*
557  * Additional features of the TMP411 chip.
558  * The TMP411 stores the minimum and maximum
559  * temperature measured since power-on, chip-reset, or
560  * minimum and maximum register reset for both the local
561  * and remote channels.
562  */
563 static SENSOR_DEVICE_ATTR_2(temp1_lowest, S_IRUGO, show_temp, NULL, 4, 0);
564 static SENSOR_DEVICE_ATTR_2(temp1_highest, S_IRUGO, show_temp, NULL, 5, 0);
565 static SENSOR_DEVICE_ATTR_2(temp2_lowest, S_IRUGO, show_temp, NULL, 4, 1);
566 static SENSOR_DEVICE_ATTR_2(temp2_highest, S_IRUGO, show_temp, NULL, 5, 1);
567 static SENSOR_DEVICE_ATTR(temp_reset_history, S_IWUSR, NULL, reset_temp_history,
568 			  0);
569 
570 static struct attribute *tmp411_attributes[] = {
571 	&sensor_dev_attr_temp1_highest.dev_attr.attr,
572 	&sensor_dev_attr_temp1_lowest.dev_attr.attr,
573 	&sensor_dev_attr_temp2_highest.dev_attr.attr,
574 	&sensor_dev_attr_temp2_lowest.dev_attr.attr,
575 	&sensor_dev_attr_temp_reset_history.dev_attr.attr,
576 	NULL
577 };
578 
579 static const struct attribute_group tmp411_group = {
580 	.attrs = tmp411_attributes,
581 };
582 
583 static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2);
584 static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp,
585 			    store_temp, 1, 2);
586 static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp,
587 			    store_temp, 2, 2);
588 static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
589 			    store_temp, 3, 2);
590 static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst,
591 			  NULL, 2);
592 static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_status, NULL,
593 			    0, TMP432_STATUS_REMOTE2);
594 static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO, show_status, NULL,
595 			    1, TMP432_STATUS_REMOTE2);
596 static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO, show_status, NULL,
597 			    2, TMP432_STATUS_REMOTE2);
598 static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO, show_status, NULL,
599 			    3, TMP432_STATUS_REMOTE2);
600 
601 static struct attribute *tmp432_attributes[] = {
602 	&sensor_dev_attr_temp3_input.dev_attr.attr,
603 	&sensor_dev_attr_temp3_min.dev_attr.attr,
604 	&sensor_dev_attr_temp3_max.dev_attr.attr,
605 	&sensor_dev_attr_temp3_crit.dev_attr.attr,
606 	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
607 	&sensor_dev_attr_temp3_fault.dev_attr.attr,
608 	&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
609 	&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
610 	&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
611 
612 	NULL
613 };
614 
615 static const struct attribute_group tmp432_group = {
616 	.attrs = tmp432_attributes,
617 };
618 
619 /*
620  * Additional features of the TMP461 chip.
621  * The TMP461 temperature offset for the remote channel.
622  */
623 static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IWUSR | S_IRUGO, show_temp,
624 			    store_temp, 6, 1);
625 
626 static struct attribute *tmp461_attributes[] = {
627 	&sensor_dev_attr_temp2_offset.dev_attr.attr,
628 	NULL
629 };
630 
631 static const struct attribute_group tmp461_group = {
632 	.attrs = tmp461_attributes,
633 };
634 
635 /*
636  * Begin non sysfs callback code (aka Real code)
637  */
638 
639 static int tmp401_init_client(struct tmp401_data *data,
640 			      struct i2c_client *client)
641 {
642 	int config, config_orig, status = 0;
643 
644 	/* Set the conversion rate to 2 Hz */
645 	i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
646 	data->update_interval = 500;
647 
648 	/* Start conversions (disable shutdown if necessary) */
649 	config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
650 	if (config < 0)
651 		return config;
652 
653 	config_orig = config;
654 	config &= ~TMP401_CONFIG_SHUTDOWN;
655 
656 	if (config != config_orig)
657 		status = i2c_smbus_write_byte_data(client,
658 						   TMP401_CONFIG_WRITE,
659 						   config);
660 
661 	return status;
662 }
663 
664 static int tmp401_detect(struct i2c_client *client,
665 			 struct i2c_board_info *info)
666 {
667 	enum chips kind;
668 	struct i2c_adapter *adapter = client->adapter;
669 	u8 reg;
670 
671 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
672 		return -ENODEV;
673 
674 	/* Detect and identify the chip */
675 	reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG);
676 	if (reg != TMP401_MANUFACTURER_ID)
677 		return -ENODEV;
678 
679 	reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
680 
681 	switch (reg) {
682 	case TMP401_DEVICE_ID:
683 		if (client->addr != 0x4c)
684 			return -ENODEV;
685 		kind = tmp401;
686 		break;
687 	case TMP411A_DEVICE_ID:
688 		if (client->addr != 0x4c)
689 			return -ENODEV;
690 		kind = tmp411;
691 		break;
692 	case TMP411B_DEVICE_ID:
693 		if (client->addr != 0x4d)
694 			return -ENODEV;
695 		kind = tmp411;
696 		break;
697 	case TMP411C_DEVICE_ID:
698 		if (client->addr != 0x4e)
699 			return -ENODEV;
700 		kind = tmp411;
701 		break;
702 	case TMP431_DEVICE_ID:
703 		if (client->addr != 0x4c && client->addr != 0x4d)
704 			return -ENODEV;
705 		kind = tmp431;
706 		break;
707 	case TMP432_DEVICE_ID:
708 		if (client->addr != 0x4c && client->addr != 0x4d)
709 			return -ENODEV;
710 		kind = tmp432;
711 		break;
712 	case TMP435_DEVICE_ID:
713 		kind = tmp435;
714 		break;
715 	default:
716 		return -ENODEV;
717 	}
718 
719 	reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
720 	if (reg & 0x1b)
721 		return -ENODEV;
722 
723 	reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ);
724 	/* Datasheet says: 0x1-0x6 */
725 	if (reg > 15)
726 		return -ENODEV;
727 
728 	strlcpy(info->type, tmp401_id[kind].name, I2C_NAME_SIZE);
729 
730 	return 0;
731 }
732 
733 static int tmp401_probe(struct i2c_client *client,
734 			const struct i2c_device_id *id)
735 {
736 	static const char * const names[] = {
737 		"TMP401", "TMP411", "TMP431", "TMP432", "TMP435", "TMP461"
738 	};
739 	struct device *dev = &client->dev;
740 	struct device *hwmon_dev;
741 	struct tmp401_data *data;
742 	int groups = 0, status;
743 
744 	data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
745 	if (!data)
746 		return -ENOMEM;
747 
748 	data->client = client;
749 	mutex_init(&data->update_lock);
750 	data->kind = id->driver_data;
751 
752 	/* Initialize the TMP401 chip */
753 	status = tmp401_init_client(data, client);
754 	if (status < 0)
755 		return status;
756 
757 	/* Register sysfs hooks */
758 	data->groups[groups++] = &tmp401_group;
759 
760 	/* Register additional tmp411 sysfs hooks */
761 	if (data->kind == tmp411)
762 		data->groups[groups++] = &tmp411_group;
763 
764 	/* Register additional tmp432 sysfs hooks */
765 	if (data->kind == tmp432)
766 		data->groups[groups++] = &tmp432_group;
767 
768 	if (data->kind == tmp461)
769 		data->groups[groups++] = &tmp461_group;
770 
771 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
772 							   data, data->groups);
773 	if (IS_ERR(hwmon_dev))
774 		return PTR_ERR(hwmon_dev);
775 
776 	dev_info(dev, "Detected TI %s chip\n", names[data->kind]);
777 
778 	return 0;
779 }
780 
781 static struct i2c_driver tmp401_driver = {
782 	.class		= I2C_CLASS_HWMON,
783 	.driver = {
784 		.name	= "tmp401",
785 	},
786 	.probe		= tmp401_probe,
787 	.id_table	= tmp401_id,
788 	.detect		= tmp401_detect,
789 	.address_list	= normal_i2c,
790 };
791 
792 module_i2c_driver(tmp401_driver);
793 
794 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
795 MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver");
796 MODULE_LICENSE("GPL");
797