xref: /openbmc/linux/drivers/hwmon/tmp401.c (revision b34e08d5)
1 /* tmp401.c
2  *
3  * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
4  * Preliminary tmp411 support by:
5  * Gabriel Konat, Sander Leget, Wouter Willems
6  * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
7  *
8  * Cleanup and support for TMP431 and TMP432 by Guenter Roeck
9  * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License, or
14  * (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24  */
25 
26 /*
27  * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC.
28  *
29  * Note this IC is in some aspect similar to the LM90, but it has quite a
30  * few differences too, for example the local temp has a higher resolution
31  * and thus has 16 bits registers for its value and limit instead of 8 bits.
32  */
33 
34 #include <linux/module.h>
35 #include <linux/init.h>
36 #include <linux/bitops.h>
37 #include <linux/slab.h>
38 #include <linux/jiffies.h>
39 #include <linux/i2c.h>
40 #include <linux/hwmon.h>
41 #include <linux/hwmon-sysfs.h>
42 #include <linux/err.h>
43 #include <linux/mutex.h>
44 #include <linux/sysfs.h>
45 
46 /* Addresses to scan */
47 static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
48 
49 enum chips { tmp401, tmp411, tmp431, tmp432 };
50 
51 /*
52  * The TMP401 registers, note some registers have different addresses for
53  * reading and writing
54  */
55 #define TMP401_STATUS				0x02
56 #define TMP401_CONFIG_READ			0x03
57 #define TMP401_CONFIG_WRITE			0x09
58 #define TMP401_CONVERSION_RATE_READ		0x04
59 #define TMP401_CONVERSION_RATE_WRITE		0x0A
60 #define TMP401_TEMP_CRIT_HYST			0x21
61 #define TMP401_MANUFACTURER_ID_REG		0xFE
62 #define TMP401_DEVICE_ID_REG			0xFF
63 
64 static const u8 TMP401_TEMP_MSB_READ[6][2] = {
65 	{ 0x00, 0x01 },	/* temp */
66 	{ 0x06, 0x08 },	/* low limit */
67 	{ 0x05, 0x07 },	/* high limit */
68 	{ 0x20, 0x19 },	/* therm (crit) limit */
69 	{ 0x30, 0x34 },	/* lowest */
70 	{ 0x32, 0x36 },	/* highest */
71 };
72 
73 static const u8 TMP401_TEMP_MSB_WRITE[6][2] = {
74 	{ 0, 0 },	/* temp (unused) */
75 	{ 0x0C, 0x0E },	/* low limit */
76 	{ 0x0B, 0x0D },	/* high limit */
77 	{ 0x20, 0x19 },	/* therm (crit) limit */
78 	{ 0x30, 0x34 },	/* lowest */
79 	{ 0x32, 0x36 },	/* highest */
80 };
81 
82 static const u8 TMP401_TEMP_LSB[6][2] = {
83 	{ 0x15, 0x10 },	/* temp */
84 	{ 0x17, 0x14 },	/* low limit */
85 	{ 0x16, 0x13 },	/* high limit */
86 	{ 0, 0 },	/* therm (crit) limit (unused) */
87 	{ 0x31, 0x35 },	/* lowest */
88 	{ 0x33, 0x37 },	/* highest */
89 };
90 
91 static const u8 TMP432_TEMP_MSB_READ[4][3] = {
92 	{ 0x00, 0x01, 0x23 },	/* temp */
93 	{ 0x06, 0x08, 0x16 },	/* low limit */
94 	{ 0x05, 0x07, 0x15 },	/* high limit */
95 	{ 0x20, 0x19, 0x1A },	/* therm (crit) limit */
96 };
97 
98 static const u8 TMP432_TEMP_MSB_WRITE[4][3] = {
99 	{ 0, 0, 0 },		/* temp  - unused */
100 	{ 0x0C, 0x0E, 0x16 },	/* low limit */
101 	{ 0x0B, 0x0D, 0x15 },	/* high limit */
102 	{ 0x20, 0x19, 0x1A },	/* therm (crit) limit */
103 };
104 
105 static const u8 TMP432_TEMP_LSB[3][3] = {
106 	{ 0x29, 0x10, 0x24 },	/* temp */
107 	{ 0x3E, 0x14, 0x18 },	/* low limit */
108 	{ 0x3D, 0x13, 0x17 },	/* high limit */
109 };
110 
111 /* [0] = fault, [1] = low, [2] = high, [3] = therm/crit */
112 static const u8 TMP432_STATUS_REG[] = {
113 	0x1b, 0x36, 0x35, 0x37 };
114 
115 /* Flags */
116 #define TMP401_CONFIG_RANGE			BIT(2)
117 #define TMP401_CONFIG_SHUTDOWN			BIT(6)
118 #define TMP401_STATUS_LOCAL_CRIT		BIT(0)
119 #define TMP401_STATUS_REMOTE_CRIT		BIT(1)
120 #define TMP401_STATUS_REMOTE_OPEN		BIT(2)
121 #define TMP401_STATUS_REMOTE_LOW		BIT(3)
122 #define TMP401_STATUS_REMOTE_HIGH		BIT(4)
123 #define TMP401_STATUS_LOCAL_LOW			BIT(5)
124 #define TMP401_STATUS_LOCAL_HIGH		BIT(6)
125 
126 /* On TMP432, each status has its own register */
127 #define TMP432_STATUS_LOCAL			BIT(0)
128 #define TMP432_STATUS_REMOTE1			BIT(1)
129 #define TMP432_STATUS_REMOTE2			BIT(2)
130 
131 /* Manufacturer / Device ID's */
132 #define TMP401_MANUFACTURER_ID			0x55
133 #define TMP401_DEVICE_ID			0x11
134 #define TMP411A_DEVICE_ID			0x12
135 #define TMP411B_DEVICE_ID			0x13
136 #define TMP411C_DEVICE_ID			0x10
137 #define TMP431_DEVICE_ID			0x31
138 #define TMP432_DEVICE_ID			0x32
139 
140 /*
141  * Driver data (common to all clients)
142  */
143 
144 static const struct i2c_device_id tmp401_id[] = {
145 	{ "tmp401", tmp401 },
146 	{ "tmp411", tmp411 },
147 	{ "tmp431", tmp431 },
148 	{ "tmp432", tmp432 },
149 	{ }
150 };
151 MODULE_DEVICE_TABLE(i2c, tmp401_id);
152 
153 /*
154  * Client data (each client gets its own)
155  */
156 
157 struct tmp401_data {
158 	struct i2c_client *client;
159 	const struct attribute_group *groups[3];
160 	struct mutex update_lock;
161 	char valid; /* zero until following fields are valid */
162 	unsigned long last_updated; /* in jiffies */
163 	enum chips kind;
164 
165 	unsigned int update_interval;	/* in milliseconds */
166 
167 	/* register values */
168 	u8 status[4];
169 	u8 config;
170 	u16 temp[6][3];
171 	u8 temp_crit_hyst;
172 };
173 
174 /*
175  * Sysfs attr show / store functions
176  */
177 
178 static int tmp401_register_to_temp(u16 reg, u8 config)
179 {
180 	int temp = reg;
181 
182 	if (config & TMP401_CONFIG_RANGE)
183 		temp -= 64 * 256;
184 
185 	return DIV_ROUND_CLOSEST(temp * 125, 32);
186 }
187 
188 static u16 tmp401_temp_to_register(long temp, u8 config, int zbits)
189 {
190 	if (config & TMP401_CONFIG_RANGE) {
191 		temp = clamp_val(temp, -64000, 191000);
192 		temp += 64000;
193 	} else
194 		temp = clamp_val(temp, 0, 127000);
195 
196 	return DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits;
197 }
198 
199 static int tmp401_update_device_reg16(struct i2c_client *client,
200 				      struct tmp401_data *data)
201 {
202 	int i, j, val;
203 	int num_regs = data->kind == tmp411 ? 6 : 4;
204 	int num_sensors = data->kind == tmp432 ? 3 : 2;
205 
206 	for (i = 0; i < num_sensors; i++) {		/* local / r1 / r2 */
207 		for (j = 0; j < num_regs; j++) {	/* temp / low / ... */
208 			u8 regaddr;
209 			/*
210 			 * High byte must be read first immediately followed
211 			 * by the low byte
212 			 */
213 			regaddr = data->kind == tmp432 ?
214 						TMP432_TEMP_MSB_READ[j][i] :
215 						TMP401_TEMP_MSB_READ[j][i];
216 			val = i2c_smbus_read_byte_data(client, regaddr);
217 			if (val < 0)
218 				return val;
219 			data->temp[j][i] = val << 8;
220 			if (j == 3)		/* crit is msb only */
221 				continue;
222 			regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[j][i]
223 						       : TMP401_TEMP_LSB[j][i];
224 			val = i2c_smbus_read_byte_data(client, regaddr);
225 			if (val < 0)
226 				return val;
227 			data->temp[j][i] |= val;
228 		}
229 	}
230 	return 0;
231 }
232 
233 static struct tmp401_data *tmp401_update_device(struct device *dev)
234 {
235 	struct tmp401_data *data = dev_get_drvdata(dev);
236 	struct i2c_client *client = data->client;
237 	struct tmp401_data *ret = data;
238 	int i, val;
239 	unsigned long next_update;
240 
241 	mutex_lock(&data->update_lock);
242 
243 	next_update = data->last_updated +
244 		      msecs_to_jiffies(data->update_interval);
245 	if (time_after(jiffies, next_update) || !data->valid) {
246 		if (data->kind != tmp432) {
247 			/*
248 			 * The driver uses the TMP432 status format internally.
249 			 * Convert status to TMP432 format for other chips.
250 			 */
251 			val = i2c_smbus_read_byte_data(client, TMP401_STATUS);
252 			if (val < 0) {
253 				ret = ERR_PTR(val);
254 				goto abort;
255 			}
256 			data->status[0] =
257 			  (val & TMP401_STATUS_REMOTE_OPEN) >> 1;
258 			data->status[1] =
259 			  ((val & TMP401_STATUS_REMOTE_LOW) >> 2) |
260 			  ((val & TMP401_STATUS_LOCAL_LOW) >> 5);
261 			data->status[2] =
262 			  ((val & TMP401_STATUS_REMOTE_HIGH) >> 3) |
263 			  ((val & TMP401_STATUS_LOCAL_HIGH) >> 6);
264 			data->status[3] = val & (TMP401_STATUS_LOCAL_CRIT
265 						| TMP401_STATUS_REMOTE_CRIT);
266 		} else {
267 			for (i = 0; i < ARRAY_SIZE(data->status); i++) {
268 				val = i2c_smbus_read_byte_data(client,
269 							TMP432_STATUS_REG[i]);
270 				if (val < 0) {
271 					ret = ERR_PTR(val);
272 					goto abort;
273 				}
274 				data->status[i] = val;
275 			}
276 		}
277 
278 		val = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
279 		if (val < 0) {
280 			ret = ERR_PTR(val);
281 			goto abort;
282 		}
283 		data->config = val;
284 		val = tmp401_update_device_reg16(client, data);
285 		if (val < 0) {
286 			ret = ERR_PTR(val);
287 			goto abort;
288 		}
289 		val = i2c_smbus_read_byte_data(client, TMP401_TEMP_CRIT_HYST);
290 		if (val < 0) {
291 			ret = ERR_PTR(val);
292 			goto abort;
293 		}
294 		data->temp_crit_hyst = val;
295 
296 		data->last_updated = jiffies;
297 		data->valid = 1;
298 	}
299 
300 abort:
301 	mutex_unlock(&data->update_lock);
302 	return ret;
303 }
304 
305 static ssize_t show_temp(struct device *dev,
306 			 struct device_attribute *devattr, char *buf)
307 {
308 	int nr = to_sensor_dev_attr_2(devattr)->nr;
309 	int index = to_sensor_dev_attr_2(devattr)->index;
310 	struct tmp401_data *data = tmp401_update_device(dev);
311 
312 	if (IS_ERR(data))
313 		return PTR_ERR(data);
314 
315 	return sprintf(buf, "%d\n",
316 		tmp401_register_to_temp(data->temp[nr][index], data->config));
317 }
318 
319 static ssize_t show_temp_crit_hyst(struct device *dev,
320 	struct device_attribute *devattr, char *buf)
321 {
322 	int temp, index = to_sensor_dev_attr(devattr)->index;
323 	struct tmp401_data *data = tmp401_update_device(dev);
324 
325 	if (IS_ERR(data))
326 		return PTR_ERR(data);
327 
328 	mutex_lock(&data->update_lock);
329 	temp = tmp401_register_to_temp(data->temp[3][index], data->config);
330 	temp -= data->temp_crit_hyst * 1000;
331 	mutex_unlock(&data->update_lock);
332 
333 	return sprintf(buf, "%d\n", temp);
334 }
335 
336 static ssize_t show_status(struct device *dev,
337 	struct device_attribute *devattr, char *buf)
338 {
339 	int nr = to_sensor_dev_attr_2(devattr)->nr;
340 	int mask = to_sensor_dev_attr_2(devattr)->index;
341 	struct tmp401_data *data = tmp401_update_device(dev);
342 
343 	if (IS_ERR(data))
344 		return PTR_ERR(data);
345 
346 	return sprintf(buf, "%d\n", !!(data->status[nr] & mask));
347 }
348 
349 static ssize_t store_temp(struct device *dev, struct device_attribute *devattr,
350 			  const char *buf, size_t count)
351 {
352 	int nr = to_sensor_dev_attr_2(devattr)->nr;
353 	int index = to_sensor_dev_attr_2(devattr)->index;
354 	struct tmp401_data *data = dev_get_drvdata(dev);
355 	struct i2c_client *client = data->client;
356 	long val;
357 	u16 reg;
358 	u8 regaddr;
359 
360 	if (kstrtol(buf, 10, &val))
361 		return -EINVAL;
362 
363 	reg = tmp401_temp_to_register(val, data->config, nr == 3 ? 8 : 4);
364 
365 	mutex_lock(&data->update_lock);
366 
367 	regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_WRITE[nr][index]
368 				       : TMP401_TEMP_MSB_WRITE[nr][index];
369 	i2c_smbus_write_byte_data(client, regaddr, reg >> 8);
370 	if (nr != 3) {
371 		regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[nr][index]
372 					       : TMP401_TEMP_LSB[nr][index];
373 		i2c_smbus_write_byte_data(client, regaddr, reg & 0xFF);
374 	}
375 	data->temp[nr][index] = reg;
376 
377 	mutex_unlock(&data->update_lock);
378 
379 	return count;
380 }
381 
382 static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute
383 	*devattr, const char *buf, size_t count)
384 {
385 	int temp, index = to_sensor_dev_attr(devattr)->index;
386 	struct tmp401_data *data = tmp401_update_device(dev);
387 	long val;
388 	u8 reg;
389 
390 	if (IS_ERR(data))
391 		return PTR_ERR(data);
392 
393 	if (kstrtol(buf, 10, &val))
394 		return -EINVAL;
395 
396 	if (data->config & TMP401_CONFIG_RANGE)
397 		val = clamp_val(val, -64000, 191000);
398 	else
399 		val = clamp_val(val, 0, 127000);
400 
401 	mutex_lock(&data->update_lock);
402 	temp = tmp401_register_to_temp(data->temp[3][index], data->config);
403 	val = clamp_val(val, temp - 255000, temp);
404 	reg = ((temp - val) + 500) / 1000;
405 
406 	i2c_smbus_write_byte_data(data->client, TMP401_TEMP_CRIT_HYST,
407 				  reg);
408 
409 	data->temp_crit_hyst = reg;
410 
411 	mutex_unlock(&data->update_lock);
412 
413 	return count;
414 }
415 
416 /*
417  * Resets the historical measurements of minimum and maximum temperatures.
418  * This is done by writing any value to any of the minimum/maximum registers
419  * (0x30-0x37).
420  */
421 static ssize_t reset_temp_history(struct device *dev,
422 	struct device_attribute	*devattr, const char *buf, size_t count)
423 {
424 	struct tmp401_data *data = dev_get_drvdata(dev);
425 	struct i2c_client *client = data->client;
426 	long val;
427 
428 	if (kstrtol(buf, 10, &val))
429 		return -EINVAL;
430 
431 	if (val != 1) {
432 		dev_err(dev,
433 			"temp_reset_history value %ld not supported. Use 1 to reset the history!\n",
434 			val);
435 		return -EINVAL;
436 	}
437 	mutex_lock(&data->update_lock);
438 	i2c_smbus_write_byte_data(client, TMP401_TEMP_MSB_WRITE[5][0], val);
439 	data->valid = 0;
440 	mutex_unlock(&data->update_lock);
441 
442 	return count;
443 }
444 
445 static ssize_t show_update_interval(struct device *dev,
446 				    struct device_attribute *attr, char *buf)
447 {
448 	struct tmp401_data *data = dev_get_drvdata(dev);
449 
450 	return sprintf(buf, "%u\n", data->update_interval);
451 }
452 
453 static ssize_t set_update_interval(struct device *dev,
454 				   struct device_attribute *attr,
455 				   const char *buf, size_t count)
456 {
457 	struct tmp401_data *data = dev_get_drvdata(dev);
458 	struct i2c_client *client = data->client;
459 	unsigned long val;
460 	int err, rate;
461 
462 	err = kstrtoul(buf, 10, &val);
463 	if (err)
464 		return err;
465 
466 	/*
467 	 * For valid rates, interval can be calculated as
468 	 *	interval = (1 << (7 - rate)) * 125;
469 	 * Rounded rate is therefore
470 	 *	rate = 7 - __fls(interval * 4 / (125 * 3));
471 	 * Use clamp_val() to avoid overflows, and to ensure valid input
472 	 * for __fls.
473 	 */
474 	val = clamp_val(val, 125, 16000);
475 	rate = 7 - __fls(val * 4 / (125 * 3));
476 	mutex_lock(&data->update_lock);
477 	i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, rate);
478 	data->update_interval = (1 << (7 - rate)) * 125;
479 	mutex_unlock(&data->update_lock);
480 
481 	return count;
482 }
483 
484 static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
485 static SENSOR_DEVICE_ATTR_2(temp1_min, S_IWUSR | S_IRUGO, show_temp,
486 			    store_temp, 1, 0);
487 static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp,
488 			    store_temp, 2, 0);
489 static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IWUSR | S_IRUGO, show_temp,
490 			    store_temp, 3, 0);
491 static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
492 			  show_temp_crit_hyst, store_temp_crit_hyst, 0);
493 static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO, show_status, NULL,
494 			    1, TMP432_STATUS_LOCAL);
495 static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO, show_status, NULL,
496 			    2, TMP432_STATUS_LOCAL);
497 static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, show_status, NULL,
498 			    3, TMP432_STATUS_LOCAL);
499 static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1);
500 static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp,
501 			    store_temp, 1, 1);
502 static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp,
503 			    store_temp, 2, 1);
504 static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IWUSR | S_IRUGO, show_temp,
505 			    store_temp, 3, 1);
506 static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst,
507 			  NULL, 1);
508 static SENSOR_DEVICE_ATTR_2(temp2_fault, S_IRUGO, show_status, NULL,
509 			    0, TMP432_STATUS_REMOTE1);
510 static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO, show_status, NULL,
511 			    1, TMP432_STATUS_REMOTE1);
512 static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO, show_status, NULL,
513 			    2, TMP432_STATUS_REMOTE1);
514 static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO, show_status, NULL,
515 			    3, TMP432_STATUS_REMOTE1);
516 
517 static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
518 		   set_update_interval);
519 
520 static struct attribute *tmp401_attributes[] = {
521 	&sensor_dev_attr_temp1_input.dev_attr.attr,
522 	&sensor_dev_attr_temp1_min.dev_attr.attr,
523 	&sensor_dev_attr_temp1_max.dev_attr.attr,
524 	&sensor_dev_attr_temp1_crit.dev_attr.attr,
525 	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
526 	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
527 	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
528 	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
529 
530 	&sensor_dev_attr_temp2_input.dev_attr.attr,
531 	&sensor_dev_attr_temp2_min.dev_attr.attr,
532 	&sensor_dev_attr_temp2_max.dev_attr.attr,
533 	&sensor_dev_attr_temp2_crit.dev_attr.attr,
534 	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
535 	&sensor_dev_attr_temp2_fault.dev_attr.attr,
536 	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
537 	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
538 	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
539 
540 	&dev_attr_update_interval.attr,
541 
542 	NULL
543 };
544 
545 static const struct attribute_group tmp401_group = {
546 	.attrs = tmp401_attributes,
547 };
548 
549 /*
550  * Additional features of the TMP411 chip.
551  * The TMP411 stores the minimum and maximum
552  * temperature measured since power-on, chip-reset, or
553  * minimum and maximum register reset for both the local
554  * and remote channels.
555  */
556 static SENSOR_DEVICE_ATTR_2(temp1_lowest, S_IRUGO, show_temp, NULL, 4, 0);
557 static SENSOR_DEVICE_ATTR_2(temp1_highest, S_IRUGO, show_temp, NULL, 5, 0);
558 static SENSOR_DEVICE_ATTR_2(temp2_lowest, S_IRUGO, show_temp, NULL, 4, 1);
559 static SENSOR_DEVICE_ATTR_2(temp2_highest, S_IRUGO, show_temp, NULL, 5, 1);
560 static SENSOR_DEVICE_ATTR(temp_reset_history, S_IWUSR, NULL, reset_temp_history,
561 			  0);
562 
563 static struct attribute *tmp411_attributes[] = {
564 	&sensor_dev_attr_temp1_highest.dev_attr.attr,
565 	&sensor_dev_attr_temp1_lowest.dev_attr.attr,
566 	&sensor_dev_attr_temp2_highest.dev_attr.attr,
567 	&sensor_dev_attr_temp2_lowest.dev_attr.attr,
568 	&sensor_dev_attr_temp_reset_history.dev_attr.attr,
569 	NULL
570 };
571 
572 static const struct attribute_group tmp411_group = {
573 	.attrs = tmp411_attributes,
574 };
575 
576 static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2);
577 static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp,
578 			    store_temp, 1, 2);
579 static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp,
580 			    store_temp, 2, 2);
581 static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
582 			    store_temp, 3, 2);
583 static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst,
584 			  NULL, 2);
585 static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_status, NULL,
586 			    0, TMP432_STATUS_REMOTE2);
587 static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO, show_status, NULL,
588 			    1, TMP432_STATUS_REMOTE2);
589 static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO, show_status, NULL,
590 			    2, TMP432_STATUS_REMOTE2);
591 static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO, show_status, NULL,
592 			    3, TMP432_STATUS_REMOTE2);
593 
594 static struct attribute *tmp432_attributes[] = {
595 	&sensor_dev_attr_temp3_input.dev_attr.attr,
596 	&sensor_dev_attr_temp3_min.dev_attr.attr,
597 	&sensor_dev_attr_temp3_max.dev_attr.attr,
598 	&sensor_dev_attr_temp3_crit.dev_attr.attr,
599 	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
600 	&sensor_dev_attr_temp3_fault.dev_attr.attr,
601 	&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
602 	&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
603 	&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
604 
605 	NULL
606 };
607 
608 static const struct attribute_group tmp432_group = {
609 	.attrs = tmp432_attributes,
610 };
611 
612 /*
613  * Begin non sysfs callback code (aka Real code)
614  */
615 
616 static void tmp401_init_client(struct tmp401_data *data,
617 			       struct i2c_client *client)
618 {
619 	int config, config_orig;
620 
621 	/* Set the conversion rate to 2 Hz */
622 	i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
623 	data->update_interval = 500;
624 
625 	/* Start conversions (disable shutdown if necessary) */
626 	config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
627 	if (config < 0) {
628 		dev_warn(&client->dev, "Initialization failed!\n");
629 		return;
630 	}
631 
632 	config_orig = config;
633 	config &= ~TMP401_CONFIG_SHUTDOWN;
634 
635 	if (config != config_orig)
636 		i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
637 }
638 
639 static int tmp401_detect(struct i2c_client *client,
640 			 struct i2c_board_info *info)
641 {
642 	enum chips kind;
643 	struct i2c_adapter *adapter = client->adapter;
644 	u8 reg;
645 
646 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
647 		return -ENODEV;
648 
649 	/* Detect and identify the chip */
650 	reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG);
651 	if (reg != TMP401_MANUFACTURER_ID)
652 		return -ENODEV;
653 
654 	reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
655 
656 	switch (reg) {
657 	case TMP401_DEVICE_ID:
658 		if (client->addr != 0x4c)
659 			return -ENODEV;
660 		kind = tmp401;
661 		break;
662 	case TMP411A_DEVICE_ID:
663 		if (client->addr != 0x4c)
664 			return -ENODEV;
665 		kind = tmp411;
666 		break;
667 	case TMP411B_DEVICE_ID:
668 		if (client->addr != 0x4d)
669 			return -ENODEV;
670 		kind = tmp411;
671 		break;
672 	case TMP411C_DEVICE_ID:
673 		if (client->addr != 0x4e)
674 			return -ENODEV;
675 		kind = tmp411;
676 		break;
677 	case TMP431_DEVICE_ID:
678 		if (client->addr == 0x4e)
679 			return -ENODEV;
680 		kind = tmp431;
681 		break;
682 	case TMP432_DEVICE_ID:
683 		if (client->addr == 0x4e)
684 			return -ENODEV;
685 		kind = tmp432;
686 		break;
687 	default:
688 		return -ENODEV;
689 	}
690 
691 	reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
692 	if (reg & 0x1b)
693 		return -ENODEV;
694 
695 	reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ);
696 	/* Datasheet says: 0x1-0x6 */
697 	if (reg > 15)
698 		return -ENODEV;
699 
700 	strlcpy(info->type, tmp401_id[kind].name, I2C_NAME_SIZE);
701 
702 	return 0;
703 }
704 
705 static int tmp401_probe(struct i2c_client *client,
706 			const struct i2c_device_id *id)
707 {
708 	const char *names[] = { "TMP401", "TMP411", "TMP431", "TMP432" };
709 	struct device *dev = &client->dev;
710 	struct device *hwmon_dev;
711 	struct tmp401_data *data;
712 	int groups = 0;
713 
714 	data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
715 	if (!data)
716 		return -ENOMEM;
717 
718 	data->client = client;
719 	mutex_init(&data->update_lock);
720 	data->kind = id->driver_data;
721 
722 	/* Initialize the TMP401 chip */
723 	tmp401_init_client(data, client);
724 
725 	/* Register sysfs hooks */
726 	data->groups[groups++] = &tmp401_group;
727 
728 	/* Register additional tmp411 sysfs hooks */
729 	if (data->kind == tmp411)
730 		data->groups[groups++] = &tmp411_group;
731 
732 	/* Register additional tmp432 sysfs hooks */
733 	if (data->kind == tmp432)
734 		data->groups[groups++] = &tmp432_group;
735 
736 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
737 							   data, data->groups);
738 	if (IS_ERR(hwmon_dev))
739 		return PTR_ERR(hwmon_dev);
740 
741 	dev_info(dev, "Detected TI %s chip\n", names[data->kind]);
742 
743 	return 0;
744 }
745 
746 static struct i2c_driver tmp401_driver = {
747 	.class		= I2C_CLASS_HWMON,
748 	.driver = {
749 		.name	= "tmp401",
750 	},
751 	.probe		= tmp401_probe,
752 	.id_table	= tmp401_id,
753 	.detect		= tmp401_detect,
754 	.address_list	= normal_i2c,
755 };
756 
757 module_i2c_driver(tmp401_driver);
758 
759 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
760 MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver");
761 MODULE_LICENSE("GPL");
762