1 /* 2 thmc50.c - Part of lm_sensors, Linux kernel modules for hardware 3 monitoring 4 Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl> 5 Based on 2.4 driver by Frodo Looijaard <frodol@dds.nl> and 6 Philip Edelbrock <phil@netroedge.com> 7 8 This program is free software; you can redistribute it and/or modify 9 it under the terms of the GNU General Public License as published by 10 the Free Software Foundation; either version 2 of the License, or 11 (at your option) any later version. 12 13 This program is distributed in the hope that it will be useful, 14 but WITHOUT ANY WARRANTY; without even the implied warranty of 15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 GNU General Public License for more details. 17 18 You should have received a copy of the GNU General Public License 19 along with this program; if not, write to the Free Software 20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22 23 #include <linux/module.h> 24 #include <linux/init.h> 25 #include <linux/slab.h> 26 #include <linux/i2c.h> 27 #include <linux/hwmon.h> 28 #include <linux/hwmon-sysfs.h> 29 #include <linux/err.h> 30 #include <linux/mutex.h> 31 32 MODULE_LICENSE("GPL"); 33 34 /* Addresses to scan */ 35 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; 36 37 /* Insmod parameters */ 38 enum chips { thmc50, adm1022 }; 39 40 static unsigned short adm1022_temp3[16]; 41 static unsigned int adm1022_temp3_num; 42 module_param_array(adm1022_temp3, ushort, &adm1022_temp3_num, 0); 43 MODULE_PARM_DESC(adm1022_temp3, "List of adapter,address pairs " 44 "to enable 3rd temperature (ADM1022 only)"); 45 46 /* Many THMC50 constants specified below */ 47 48 /* The THMC50 registers */ 49 #define THMC50_REG_CONF 0x40 50 #define THMC50_REG_COMPANY_ID 0x3E 51 #define THMC50_REG_DIE_CODE 0x3F 52 #define THMC50_REG_ANALOG_OUT 0x19 53 /* 54 * The mirror status register cannot be used as 55 * reading it does not clear alarms. 56 */ 57 #define THMC50_REG_INTR 0x41 58 59 static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 }; 60 static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C }; 61 static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B }; 62 static const u8 THMC50_REG_TEMP_CRITICAL[] = { 0x13, 0x14, 0x14 }; 63 static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 }; 64 65 #define THMC50_REG_CONF_nFANOFF 0x20 66 #define THMC50_REG_CONF_PROGRAMMED 0x08 67 68 /* Each client has this additional data */ 69 struct thmc50_data { 70 struct device *hwmon_dev; 71 72 struct mutex update_lock; 73 enum chips type; 74 unsigned long last_updated; /* In jiffies */ 75 char has_temp3; /* !=0 if it is ADM1022 in temp3 mode */ 76 char valid; /* !=0 if following fields are valid */ 77 78 /* Register values */ 79 s8 temp_input[3]; 80 s8 temp_max[3]; 81 s8 temp_min[3]; 82 s8 temp_critical[3]; 83 u8 analog_out; 84 u8 alarms; 85 }; 86 87 static int thmc50_detect(struct i2c_client *client, 88 struct i2c_board_info *info); 89 static int thmc50_probe(struct i2c_client *client, 90 const struct i2c_device_id *id); 91 static int thmc50_remove(struct i2c_client *client); 92 static void thmc50_init_client(struct i2c_client *client); 93 static struct thmc50_data *thmc50_update_device(struct device *dev); 94 95 static const struct i2c_device_id thmc50_id[] = { 96 { "adm1022", adm1022 }, 97 { "thmc50", thmc50 }, 98 { } 99 }; 100 MODULE_DEVICE_TABLE(i2c, thmc50_id); 101 102 static struct i2c_driver thmc50_driver = { 103 .class = I2C_CLASS_HWMON, 104 .driver = { 105 .name = "thmc50", 106 }, 107 .probe = thmc50_probe, 108 .remove = thmc50_remove, 109 .id_table = thmc50_id, 110 .detect = thmc50_detect, 111 .address_list = normal_i2c, 112 }; 113 114 static ssize_t show_analog_out(struct device *dev, 115 struct device_attribute *attr, char *buf) 116 { 117 struct thmc50_data *data = thmc50_update_device(dev); 118 return sprintf(buf, "%d\n", data->analog_out); 119 } 120 121 static ssize_t set_analog_out(struct device *dev, 122 struct device_attribute *attr, 123 const char *buf, size_t count) 124 { 125 struct i2c_client *client = to_i2c_client(dev); 126 struct thmc50_data *data = i2c_get_clientdata(client); 127 int tmp = simple_strtoul(buf, NULL, 10); 128 int config; 129 130 mutex_lock(&data->update_lock); 131 data->analog_out = SENSORS_LIMIT(tmp, 0, 255); 132 i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT, 133 data->analog_out); 134 135 config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); 136 if (data->analog_out == 0) 137 config &= ~THMC50_REG_CONF_nFANOFF; 138 else 139 config |= THMC50_REG_CONF_nFANOFF; 140 i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config); 141 142 mutex_unlock(&data->update_lock); 143 return count; 144 } 145 146 /* There is only one PWM mode = DC */ 147 static ssize_t show_pwm_mode(struct device *dev, struct device_attribute *attr, 148 char *buf) 149 { 150 return sprintf(buf, "0\n"); 151 } 152 153 /* Temperatures */ 154 static ssize_t show_temp(struct device *dev, struct device_attribute *attr, 155 char *buf) 156 { 157 int nr = to_sensor_dev_attr(attr)->index; 158 struct thmc50_data *data = thmc50_update_device(dev); 159 return sprintf(buf, "%d\n", data->temp_input[nr] * 1000); 160 } 161 162 static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, 163 char *buf) 164 { 165 int nr = to_sensor_dev_attr(attr)->index; 166 struct thmc50_data *data = thmc50_update_device(dev); 167 return sprintf(buf, "%d\n", data->temp_min[nr] * 1000); 168 } 169 170 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, 171 const char *buf, size_t count) 172 { 173 int nr = to_sensor_dev_attr(attr)->index; 174 struct i2c_client *client = to_i2c_client(dev); 175 struct thmc50_data *data = i2c_get_clientdata(client); 176 int val = simple_strtol(buf, NULL, 10); 177 178 mutex_lock(&data->update_lock); 179 data->temp_min[nr] = SENSORS_LIMIT(val / 1000, -128, 127); 180 i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MIN[nr], 181 data->temp_min[nr]); 182 mutex_unlock(&data->update_lock); 183 return count; 184 } 185 186 static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, 187 char *buf) 188 { 189 int nr = to_sensor_dev_attr(attr)->index; 190 struct thmc50_data *data = thmc50_update_device(dev); 191 return sprintf(buf, "%d\n", data->temp_max[nr] * 1000); 192 } 193 194 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, 195 const char *buf, size_t count) 196 { 197 int nr = to_sensor_dev_attr(attr)->index; 198 struct i2c_client *client = to_i2c_client(dev); 199 struct thmc50_data *data = i2c_get_clientdata(client); 200 int val = simple_strtol(buf, NULL, 10); 201 202 mutex_lock(&data->update_lock); 203 data->temp_max[nr] = SENSORS_LIMIT(val / 1000, -128, 127); 204 i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MAX[nr], 205 data->temp_max[nr]); 206 mutex_unlock(&data->update_lock); 207 return count; 208 } 209 210 static ssize_t show_temp_critical(struct device *dev, 211 struct device_attribute *attr, 212 char *buf) 213 { 214 int nr = to_sensor_dev_attr(attr)->index; 215 struct thmc50_data *data = thmc50_update_device(dev); 216 return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000); 217 } 218 219 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, 220 char *buf) 221 { 222 int index = to_sensor_dev_attr(attr)->index; 223 struct thmc50_data *data = thmc50_update_device(dev); 224 225 return sprintf(buf, "%u\n", (data->alarms >> index) & 1); 226 } 227 228 #define temp_reg(offset) \ 229 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, \ 230 NULL, offset - 1); \ 231 static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ 232 show_temp_min, set_temp_min, offset - 1); \ 233 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ 234 show_temp_max, set_temp_max, offset - 1); \ 235 static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO, \ 236 show_temp_critical, NULL, offset - 1); 237 238 temp_reg(1); 239 temp_reg(2); 240 temp_reg(3); 241 242 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 0); 243 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5); 244 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 1); 245 static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 7); 246 static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2); 247 248 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_analog_out, 249 set_analog_out, 0); 250 static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0); 251 252 static struct attribute *thmc50_attributes[] = { 253 &sensor_dev_attr_temp1_max.dev_attr.attr, 254 &sensor_dev_attr_temp1_min.dev_attr.attr, 255 &sensor_dev_attr_temp1_input.dev_attr.attr, 256 &sensor_dev_attr_temp1_crit.dev_attr.attr, 257 &sensor_dev_attr_temp1_alarm.dev_attr.attr, 258 &sensor_dev_attr_temp2_max.dev_attr.attr, 259 &sensor_dev_attr_temp2_min.dev_attr.attr, 260 &sensor_dev_attr_temp2_input.dev_attr.attr, 261 &sensor_dev_attr_temp2_crit.dev_attr.attr, 262 &sensor_dev_attr_temp2_alarm.dev_attr.attr, 263 &sensor_dev_attr_temp2_fault.dev_attr.attr, 264 &sensor_dev_attr_pwm1.dev_attr.attr, 265 &sensor_dev_attr_pwm1_mode.dev_attr.attr, 266 NULL 267 }; 268 269 static const struct attribute_group thmc50_group = { 270 .attrs = thmc50_attributes, 271 }; 272 273 /* for ADM1022 3rd temperature mode */ 274 static struct attribute *temp3_attributes[] = { 275 &sensor_dev_attr_temp3_max.dev_attr.attr, 276 &sensor_dev_attr_temp3_min.dev_attr.attr, 277 &sensor_dev_attr_temp3_input.dev_attr.attr, 278 &sensor_dev_attr_temp3_crit.dev_attr.attr, 279 &sensor_dev_attr_temp3_alarm.dev_attr.attr, 280 &sensor_dev_attr_temp3_fault.dev_attr.attr, 281 NULL 282 }; 283 284 static const struct attribute_group temp3_group = { 285 .attrs = temp3_attributes, 286 }; 287 288 /* Return 0 if detection is successful, -ENODEV otherwise */ 289 static int thmc50_detect(struct i2c_client *client, 290 struct i2c_board_info *info) 291 { 292 unsigned company; 293 unsigned revision; 294 unsigned config; 295 struct i2c_adapter *adapter = client->adapter; 296 const char *type_name; 297 298 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { 299 pr_debug("thmc50: detect failed, " 300 "smbus byte data not supported!\n"); 301 return -ENODEV; 302 } 303 304 pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n", 305 client->addr, i2c_adapter_id(client->adapter)); 306 307 company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID); 308 revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE); 309 config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); 310 if (revision < 0xc0 || (config & 0x10)) 311 return -ENODEV; 312 313 if (company == 0x41) { 314 int id = i2c_adapter_id(client->adapter); 315 int i; 316 317 type_name = "adm1022"; 318 for (i = 0; i + 1 < adm1022_temp3_num; i += 2) 319 if (adm1022_temp3[i] == id && 320 adm1022_temp3[i + 1] == client->addr) { 321 /* enable 2nd remote temp */ 322 config |= (1 << 7); 323 i2c_smbus_write_byte_data(client, 324 THMC50_REG_CONF, 325 config); 326 break; 327 } 328 } else if (company == 0x49) { 329 type_name = "thmc50"; 330 } else { 331 pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n"); 332 return -ENODEV; 333 } 334 335 pr_debug("thmc50: Detected %s (version %x, revision %x)\n", 336 type_name, (revision >> 4) - 0xc, revision & 0xf); 337 338 strlcpy(info->type, type_name, I2C_NAME_SIZE); 339 340 return 0; 341 } 342 343 static int thmc50_probe(struct i2c_client *client, 344 const struct i2c_device_id *id) 345 { 346 struct thmc50_data *data; 347 int err; 348 349 data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL); 350 if (!data) { 351 pr_debug("thmc50: detect failed, kzalloc failed!\n"); 352 err = -ENOMEM; 353 goto exit; 354 } 355 356 i2c_set_clientdata(client, data); 357 data->type = id->driver_data; 358 mutex_init(&data->update_lock); 359 360 thmc50_init_client(client); 361 362 /* Register sysfs hooks */ 363 if ((err = sysfs_create_group(&client->dev.kobj, &thmc50_group))) 364 goto exit_free; 365 366 /* Register ADM1022 sysfs hooks */ 367 if (data->has_temp3) 368 if ((err = sysfs_create_group(&client->dev.kobj, 369 &temp3_group))) 370 goto exit_remove_sysfs_thmc50; 371 372 /* Register a new directory entry with module sensors */ 373 data->hwmon_dev = hwmon_device_register(&client->dev); 374 if (IS_ERR(data->hwmon_dev)) { 375 err = PTR_ERR(data->hwmon_dev); 376 goto exit_remove_sysfs; 377 } 378 379 return 0; 380 381 exit_remove_sysfs: 382 if (data->has_temp3) 383 sysfs_remove_group(&client->dev.kobj, &temp3_group); 384 exit_remove_sysfs_thmc50: 385 sysfs_remove_group(&client->dev.kobj, &thmc50_group); 386 exit_free: 387 kfree(data); 388 exit: 389 return err; 390 } 391 392 static int thmc50_remove(struct i2c_client *client) 393 { 394 struct thmc50_data *data = i2c_get_clientdata(client); 395 396 hwmon_device_unregister(data->hwmon_dev); 397 sysfs_remove_group(&client->dev.kobj, &thmc50_group); 398 if (data->has_temp3) 399 sysfs_remove_group(&client->dev.kobj, &temp3_group); 400 401 kfree(data); 402 403 return 0; 404 } 405 406 static void thmc50_init_client(struct i2c_client *client) 407 { 408 struct thmc50_data *data = i2c_get_clientdata(client); 409 int config; 410 411 data->analog_out = i2c_smbus_read_byte_data(client, 412 THMC50_REG_ANALOG_OUT); 413 /* set up to at least 1 */ 414 if (data->analog_out == 0) { 415 data->analog_out = 1; 416 i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT, 417 data->analog_out); 418 } 419 config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); 420 config |= 0x1; /* start the chip if it is in standby mode */ 421 if (data->type == adm1022 && (config & (1 << 7))) 422 data->has_temp3 = 1; 423 i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config); 424 } 425 426 static struct thmc50_data *thmc50_update_device(struct device *dev) 427 { 428 struct i2c_client *client = to_i2c_client(dev); 429 struct thmc50_data *data = i2c_get_clientdata(client); 430 int timeout = HZ / 5 + (data->type == thmc50 ? HZ : 0); 431 432 mutex_lock(&data->update_lock); 433 434 if (time_after(jiffies, data->last_updated + timeout) 435 || !data->valid) { 436 437 int temps = data->has_temp3 ? 3 : 2; 438 int i; 439 int prog = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); 440 441 prog &= THMC50_REG_CONF_PROGRAMMED; 442 443 for (i = 0; i < temps; i++) { 444 data->temp_input[i] = i2c_smbus_read_byte_data(client, 445 THMC50_REG_TEMP[i]); 446 data->temp_max[i] = i2c_smbus_read_byte_data(client, 447 THMC50_REG_TEMP_MAX[i]); 448 data->temp_min[i] = i2c_smbus_read_byte_data(client, 449 THMC50_REG_TEMP_MIN[i]); 450 data->temp_critical[i] = 451 i2c_smbus_read_byte_data(client, 452 prog ? THMC50_REG_TEMP_CRITICAL[i] 453 : THMC50_REG_TEMP_DEFAULT[i]); 454 } 455 data->analog_out = 456 i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT); 457 data->alarms = 458 i2c_smbus_read_byte_data(client, THMC50_REG_INTR); 459 data->last_updated = jiffies; 460 data->valid = 1; 461 } 462 463 mutex_unlock(&data->update_lock); 464 465 return data; 466 } 467 468 static int __init sm_thmc50_init(void) 469 { 470 return i2c_add_driver(&thmc50_driver); 471 } 472 473 static void __exit sm_thmc50_exit(void) 474 { 475 i2c_del_driver(&thmc50_driver); 476 } 477 478 MODULE_AUTHOR("Krzysztof Helt <krzysztof.h1@wp.pl>"); 479 MODULE_DESCRIPTION("THMC50 driver"); 480 481 module_init(sm_thmc50_init); 482 module_exit(sm_thmc50_exit); 483