1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* Sensirion SHTC1 humidity and temperature sensor driver 3 * 4 * Copyright (C) 2014 Sensirion AG, Switzerland 5 * Author: Johannes Winkelmann <johannes.winkelmann@sensirion.com> 6 */ 7 8 #include <linux/module.h> 9 #include <linux/init.h> 10 #include <linux/slab.h> 11 #include <linux/i2c.h> 12 #include <linux/hwmon.h> 13 #include <linux/hwmon-sysfs.h> 14 #include <linux/err.h> 15 #include <linux/delay.h> 16 #include <linux/platform_data/shtc1.h> 17 #include <linux/of.h> 18 19 /* commands (high precision mode) */ 20 static const unsigned char shtc1_cmd_measure_blocking_hpm[] = { 0x7C, 0xA2 }; 21 static const unsigned char shtc1_cmd_measure_nonblocking_hpm[] = { 0x78, 0x66 }; 22 23 /* commands (low precision mode) */ 24 static const unsigned char shtc1_cmd_measure_blocking_lpm[] = { 0x64, 0x58 }; 25 static const unsigned char shtc1_cmd_measure_nonblocking_lpm[] = { 0x60, 0x9c }; 26 27 /* command for reading the ID register */ 28 static const unsigned char shtc1_cmd_read_id_reg[] = { 0xef, 0xc8 }; 29 30 /* 31 * constants for reading the ID register 32 * SHTC1: 0x0007 with mask 0x003f 33 * SHTW1: 0x0007 with mask 0x003f 34 * SHTC3: 0x0807 with mask 0x083f 35 */ 36 #define SHTC3_ID 0x0807 37 #define SHTC3_ID_MASK 0x083f 38 #define SHTC1_ID 0x0007 39 #define SHTC1_ID_MASK 0x003f 40 41 /* delays for non-blocking i2c commands, both in us */ 42 #define SHTC1_NONBLOCKING_WAIT_TIME_HPM 14400 43 #define SHTC1_NONBLOCKING_WAIT_TIME_LPM 1000 44 #define SHTC3_NONBLOCKING_WAIT_TIME_HPM 12100 45 #define SHTC3_NONBLOCKING_WAIT_TIME_LPM 800 46 47 #define SHTC1_CMD_LENGTH 2 48 #define SHTC1_RESPONSE_LENGTH 6 49 50 enum shtcx_chips { 51 shtc1, 52 shtc3, 53 }; 54 55 struct shtc1_data { 56 struct i2c_client *client; 57 struct mutex update_lock; 58 bool valid; 59 unsigned long last_updated; /* in jiffies */ 60 61 const unsigned char *command; 62 unsigned int nonblocking_wait_time; /* in us */ 63 64 struct shtc1_platform_data setup; 65 enum shtcx_chips chip; 66 67 int temperature; /* 1000 * temperature in dgr C */ 68 int humidity; /* 1000 * relative humidity in %RH */ 69 }; 70 71 static int shtc1_update_values(struct i2c_client *client, 72 struct shtc1_data *data, 73 char *buf, int bufsize) 74 { 75 int ret = i2c_master_send(client, data->command, SHTC1_CMD_LENGTH); 76 if (ret != SHTC1_CMD_LENGTH) { 77 dev_err(&client->dev, "failed to send command: %d\n", ret); 78 return ret < 0 ? ret : -EIO; 79 } 80 81 /* 82 * In blocking mode (clock stretching mode) the I2C bus 83 * is blocked for other traffic, thus the call to i2c_master_recv() 84 * will wait until the data is ready. For non blocking mode, we 85 * have to wait ourselves. 86 */ 87 if (!data->setup.blocking_io) 88 usleep_range(data->nonblocking_wait_time, 89 data->nonblocking_wait_time + 1000); 90 91 ret = i2c_master_recv(client, buf, bufsize); 92 if (ret != bufsize) { 93 dev_err(&client->dev, "failed to read values: %d\n", ret); 94 return ret < 0 ? ret : -EIO; 95 } 96 97 return 0; 98 } 99 100 /* sysfs attributes */ 101 static struct shtc1_data *shtc1_update_client(struct device *dev) 102 { 103 struct shtc1_data *data = dev_get_drvdata(dev); 104 struct i2c_client *client = data->client; 105 unsigned char buf[SHTC1_RESPONSE_LENGTH]; 106 int val; 107 int ret = 0; 108 109 mutex_lock(&data->update_lock); 110 111 if (time_after(jiffies, data->last_updated + HZ / 10) || !data->valid) { 112 ret = shtc1_update_values(client, data, buf, sizeof(buf)); 113 if (ret) 114 goto out; 115 116 /* 117 * From datasheet: 118 * T = -45 + 175 * ST / 2^16 119 * RH = 100 * SRH / 2^16 120 * 121 * Adapted for integer fixed point (3 digit) arithmetic. 122 */ 123 val = be16_to_cpup((__be16 *)buf); 124 data->temperature = ((21875 * val) >> 13) - 45000; 125 val = be16_to_cpup((__be16 *)(buf + 3)); 126 data->humidity = ((12500 * val) >> 13); 127 128 data->last_updated = jiffies; 129 data->valid = true; 130 } 131 132 out: 133 mutex_unlock(&data->update_lock); 134 135 return ret == 0 ? data : ERR_PTR(ret); 136 } 137 138 static ssize_t temp1_input_show(struct device *dev, 139 struct device_attribute *attr, 140 char *buf) 141 { 142 struct shtc1_data *data = shtc1_update_client(dev); 143 if (IS_ERR(data)) 144 return PTR_ERR(data); 145 146 return sprintf(buf, "%d\n", data->temperature); 147 } 148 149 static ssize_t humidity1_input_show(struct device *dev, 150 struct device_attribute *attr, char *buf) 151 { 152 struct shtc1_data *data = shtc1_update_client(dev); 153 if (IS_ERR(data)) 154 return PTR_ERR(data); 155 156 return sprintf(buf, "%d\n", data->humidity); 157 } 158 159 static DEVICE_ATTR_RO(temp1_input); 160 static DEVICE_ATTR_RO(humidity1_input); 161 162 static struct attribute *shtc1_attrs[] = { 163 &dev_attr_temp1_input.attr, 164 &dev_attr_humidity1_input.attr, 165 NULL 166 }; 167 168 ATTRIBUTE_GROUPS(shtc1); 169 170 static void shtc1_select_command(struct shtc1_data *data) 171 { 172 if (data->setup.high_precision) { 173 data->command = data->setup.blocking_io ? 174 shtc1_cmd_measure_blocking_hpm : 175 shtc1_cmd_measure_nonblocking_hpm; 176 data->nonblocking_wait_time = (data->chip == shtc1) ? 177 SHTC1_NONBLOCKING_WAIT_TIME_HPM : 178 SHTC3_NONBLOCKING_WAIT_TIME_HPM; 179 } else { 180 data->command = data->setup.blocking_io ? 181 shtc1_cmd_measure_blocking_lpm : 182 shtc1_cmd_measure_nonblocking_lpm; 183 data->nonblocking_wait_time = (data->chip == shtc1) ? 184 SHTC1_NONBLOCKING_WAIT_TIME_LPM : 185 SHTC3_NONBLOCKING_WAIT_TIME_LPM; 186 } 187 } 188 189 static const struct i2c_device_id shtc1_id[]; 190 191 static int shtc1_probe(struct i2c_client *client) 192 { 193 int ret; 194 u16 id_reg; 195 char id_reg_buf[2]; 196 struct shtc1_data *data; 197 struct device *hwmon_dev; 198 enum shtcx_chips chip = i2c_match_id(shtc1_id, client)->driver_data; 199 struct i2c_adapter *adap = client->adapter; 200 struct device *dev = &client->dev; 201 struct device_node *np = dev->of_node; 202 203 if (!i2c_check_functionality(adap, I2C_FUNC_I2C)) { 204 dev_err(dev, "plain i2c transactions not supported\n"); 205 return -ENODEV; 206 } 207 208 ret = i2c_master_send(client, shtc1_cmd_read_id_reg, SHTC1_CMD_LENGTH); 209 if (ret != SHTC1_CMD_LENGTH) { 210 dev_err(dev, "could not send read_id_reg command: %d\n", ret); 211 return ret < 0 ? ret : -ENODEV; 212 } 213 ret = i2c_master_recv(client, id_reg_buf, sizeof(id_reg_buf)); 214 if (ret != sizeof(id_reg_buf)) { 215 dev_err(dev, "could not read ID register: %d\n", ret); 216 return -ENODEV; 217 } 218 219 id_reg = be16_to_cpup((__be16 *)id_reg_buf); 220 if (chip == shtc3) { 221 if ((id_reg & SHTC3_ID_MASK) != SHTC3_ID) { 222 dev_err(dev, "SHTC3 ID register does not match\n"); 223 return -ENODEV; 224 } 225 } else if ((id_reg & SHTC1_ID_MASK) != SHTC1_ID) { 226 dev_err(dev, "SHTC1 ID register does not match\n"); 227 return -ENODEV; 228 } 229 230 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); 231 if (!data) 232 return -ENOMEM; 233 234 data->setup.blocking_io = false; 235 data->setup.high_precision = true; 236 data->client = client; 237 data->chip = chip; 238 239 if (np) { 240 data->setup.blocking_io = of_property_read_bool(np, "sensirion,blocking-io"); 241 data->setup.high_precision = !of_property_read_bool(np, "sensicon,low-precision"); 242 } else { 243 if (client->dev.platform_data) 244 data->setup = *(struct shtc1_platform_data *)dev->platform_data; 245 } 246 247 shtc1_select_command(data); 248 mutex_init(&data->update_lock); 249 250 hwmon_dev = devm_hwmon_device_register_with_groups(dev, 251 client->name, 252 data, 253 shtc1_groups); 254 if (IS_ERR(hwmon_dev)) 255 dev_dbg(dev, "unable to register hwmon device\n"); 256 257 return PTR_ERR_OR_ZERO(hwmon_dev); 258 } 259 260 /* device ID table */ 261 static const struct i2c_device_id shtc1_id[] = { 262 { "shtc1", shtc1 }, 263 { "shtw1", shtc1 }, 264 { "shtc3", shtc3 }, 265 { } 266 }; 267 MODULE_DEVICE_TABLE(i2c, shtc1_id); 268 269 static const struct of_device_id shtc1_of_match[] = { 270 { .compatible = "sensirion,shtc1" }, 271 { .compatible = "sensirion,shtw1" }, 272 { .compatible = "sensirion,shtc3" }, 273 { } 274 }; 275 MODULE_DEVICE_TABLE(of, shtc1_of_match); 276 277 static struct i2c_driver shtc1_i2c_driver = { 278 .driver = { 279 .name = "shtc1", 280 .of_match_table = shtc1_of_match, 281 }, 282 .probe_new = shtc1_probe, 283 .id_table = shtc1_id, 284 }; 285 286 module_i2c_driver(shtc1_i2c_driver); 287 288 MODULE_AUTHOR("Johannes Winkelmann <johannes.winkelmann@sensirion.com>"); 289 MODULE_DESCRIPTION("Sensirion SHTC1 humidity and temperature sensor driver"); 290 MODULE_LICENSE("GPL"); 291