1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * powr1220.c - Driver for the Lattice POWR1220 programmable power supply 4 * and monitor. Users can read all ADC inputs along with their labels 5 * using the sysfs nodes. 6 * 7 * Copyright (c) 2014 Echo360 https://www.echo360.com 8 * Scott Kanowitz <skanowitz@echo360.com> <scott.kanowitz@gmail.com> 9 */ 10 11 #include <linux/module.h> 12 #include <linux/init.h> 13 #include <linux/slab.h> 14 #include <linux/jiffies.h> 15 #include <linux/i2c.h> 16 #include <linux/hwmon.h> 17 #include <linux/hwmon-sysfs.h> 18 #include <linux/err.h> 19 #include <linux/mutex.h> 20 #include <linux/delay.h> 21 22 #define ADC_STEP_MV 2 23 #define ADC_MAX_LOW_MEASUREMENT_MV 2000 24 25 enum powr1220_regs { 26 VMON_STATUS0, 27 VMON_STATUS1, 28 VMON_STATUS2, 29 OUTPUT_STATUS0, 30 OUTPUT_STATUS1, 31 OUTPUT_STATUS2, 32 INPUT_STATUS, 33 ADC_VALUE_LOW, 34 ADC_VALUE_HIGH, 35 ADC_MUX, 36 UES_BYTE0, 37 UES_BYTE1, 38 UES_BYTE2, 39 UES_BYTE3, 40 GP_OUTPUT1, 41 GP_OUTPUT2, 42 GP_OUTPUT3, 43 INPUT_VALUE, 44 RESET, 45 TRIM1_TRIM, 46 TRIM2_TRIM, 47 TRIM3_TRIM, 48 TRIM4_TRIM, 49 TRIM5_TRIM, 50 TRIM6_TRIM, 51 TRIM7_TRIM, 52 TRIM8_TRIM, 53 MAX_POWR1220_REGS 54 }; 55 56 enum powr1220_adc_values { 57 VMON1, 58 VMON2, 59 VMON3, 60 VMON4, 61 VMON5, 62 VMON6, 63 VMON7, 64 VMON8, 65 VMON9, 66 VMON10, 67 VMON11, 68 VMON12, 69 VCCA, 70 VCCINP, 71 MAX_POWR1220_ADC_VALUES 72 }; 73 74 struct powr1220_data { 75 struct i2c_client *client; 76 struct mutex update_lock; 77 bool adc_valid[MAX_POWR1220_ADC_VALUES]; 78 /* the next value is in jiffies */ 79 unsigned long adc_last_updated[MAX_POWR1220_ADC_VALUES]; 80 81 /* values */ 82 int adc_maxes[MAX_POWR1220_ADC_VALUES]; 83 int adc_values[MAX_POWR1220_ADC_VALUES]; 84 }; 85 86 static const char * const input_names[] = { 87 [VMON1] = "vmon1", 88 [VMON2] = "vmon2", 89 [VMON3] = "vmon3", 90 [VMON4] = "vmon4", 91 [VMON5] = "vmon5", 92 [VMON6] = "vmon6", 93 [VMON7] = "vmon7", 94 [VMON8] = "vmon8", 95 [VMON9] = "vmon9", 96 [VMON10] = "vmon10", 97 [VMON11] = "vmon11", 98 [VMON12] = "vmon12", 99 [VCCA] = "vcca", 100 [VCCINP] = "vccinp", 101 }; 102 103 /* Reads the specified ADC channel */ 104 static int powr1220_read_adc(struct device *dev, int ch_num) 105 { 106 struct powr1220_data *data = dev_get_drvdata(dev); 107 int reading; 108 int result; 109 int adc_range = 0; 110 111 mutex_lock(&data->update_lock); 112 113 if (time_after(jiffies, data->adc_last_updated[ch_num] + HZ) || 114 !data->adc_valid[ch_num]) { 115 /* 116 * figure out if we need to use the attenuator for 117 * high inputs or inputs that we don't yet have a measurement 118 * for. We dynamically set the attenuator depending on the 119 * max reading. 120 */ 121 if (data->adc_maxes[ch_num] > ADC_MAX_LOW_MEASUREMENT_MV || 122 data->adc_maxes[ch_num] == 0) 123 adc_range = 1 << 4; 124 125 /* set the attenuator and mux */ 126 result = i2c_smbus_write_byte_data(data->client, ADC_MUX, 127 adc_range | ch_num); 128 if (result) 129 goto exit; 130 131 /* 132 * wait at least Tconvert time (200 us) for the 133 * conversion to complete 134 */ 135 udelay(200); 136 137 /* get the ADC reading */ 138 result = i2c_smbus_read_byte_data(data->client, ADC_VALUE_LOW); 139 if (result < 0) 140 goto exit; 141 142 reading = result >> 4; 143 144 /* get the upper half of the reading */ 145 result = i2c_smbus_read_byte_data(data->client, ADC_VALUE_HIGH); 146 if (result < 0) 147 goto exit; 148 149 reading |= result << 4; 150 151 /* now convert the reading to a voltage */ 152 reading *= ADC_STEP_MV; 153 data->adc_values[ch_num] = reading; 154 data->adc_valid[ch_num] = true; 155 data->adc_last_updated[ch_num] = jiffies; 156 result = reading; 157 158 if (reading > data->adc_maxes[ch_num]) 159 data->adc_maxes[ch_num] = reading; 160 } else { 161 result = data->adc_values[ch_num]; 162 } 163 164 exit: 165 mutex_unlock(&data->update_lock); 166 167 return result; 168 } 169 170 /* Shows the voltage associated with the specified ADC channel */ 171 static ssize_t powr1220_voltage_show(struct device *dev, 172 struct device_attribute *dev_attr, 173 char *buf) 174 { 175 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); 176 int adc_val = powr1220_read_adc(dev, attr->index); 177 178 if (adc_val < 0) 179 return adc_val; 180 181 return sprintf(buf, "%d\n", adc_val); 182 } 183 184 /* Shows the maximum setting associated with the specified ADC channel */ 185 static ssize_t powr1220_max_show(struct device *dev, 186 struct device_attribute *dev_attr, char *buf) 187 { 188 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); 189 struct powr1220_data *data = dev_get_drvdata(dev); 190 191 return sprintf(buf, "%d\n", data->adc_maxes[attr->index]); 192 } 193 194 /* Shows the label associated with the specified ADC channel */ 195 static ssize_t powr1220_label_show(struct device *dev, 196 struct device_attribute *dev_attr, 197 char *buf) 198 { 199 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); 200 201 return sprintf(buf, "%s\n", input_names[attr->index]); 202 } 203 204 static SENSOR_DEVICE_ATTR_RO(in0_input, powr1220_voltage, VMON1); 205 static SENSOR_DEVICE_ATTR_RO(in1_input, powr1220_voltage, VMON2); 206 static SENSOR_DEVICE_ATTR_RO(in2_input, powr1220_voltage, VMON3); 207 static SENSOR_DEVICE_ATTR_RO(in3_input, powr1220_voltage, VMON4); 208 static SENSOR_DEVICE_ATTR_RO(in4_input, powr1220_voltage, VMON5); 209 static SENSOR_DEVICE_ATTR_RO(in5_input, powr1220_voltage, VMON6); 210 static SENSOR_DEVICE_ATTR_RO(in6_input, powr1220_voltage, VMON7); 211 static SENSOR_DEVICE_ATTR_RO(in7_input, powr1220_voltage, VMON8); 212 static SENSOR_DEVICE_ATTR_RO(in8_input, powr1220_voltage, VMON9); 213 static SENSOR_DEVICE_ATTR_RO(in9_input, powr1220_voltage, VMON10); 214 static SENSOR_DEVICE_ATTR_RO(in10_input, powr1220_voltage, VMON11); 215 static SENSOR_DEVICE_ATTR_RO(in11_input, powr1220_voltage, VMON12); 216 static SENSOR_DEVICE_ATTR_RO(in12_input, powr1220_voltage, VCCA); 217 static SENSOR_DEVICE_ATTR_RO(in13_input, powr1220_voltage, VCCINP); 218 219 static SENSOR_DEVICE_ATTR_RO(in0_highest, powr1220_max, VMON1); 220 static SENSOR_DEVICE_ATTR_RO(in1_highest, powr1220_max, VMON2); 221 static SENSOR_DEVICE_ATTR_RO(in2_highest, powr1220_max, VMON3); 222 static SENSOR_DEVICE_ATTR_RO(in3_highest, powr1220_max, VMON4); 223 static SENSOR_DEVICE_ATTR_RO(in4_highest, powr1220_max, VMON5); 224 static SENSOR_DEVICE_ATTR_RO(in5_highest, powr1220_max, VMON6); 225 static SENSOR_DEVICE_ATTR_RO(in6_highest, powr1220_max, VMON7); 226 static SENSOR_DEVICE_ATTR_RO(in7_highest, powr1220_max, VMON8); 227 static SENSOR_DEVICE_ATTR_RO(in8_highest, powr1220_max, VMON9); 228 static SENSOR_DEVICE_ATTR_RO(in9_highest, powr1220_max, VMON10); 229 static SENSOR_DEVICE_ATTR_RO(in10_highest, powr1220_max, VMON11); 230 static SENSOR_DEVICE_ATTR_RO(in11_highest, powr1220_max, VMON12); 231 static SENSOR_DEVICE_ATTR_RO(in12_highest, powr1220_max, VCCA); 232 static SENSOR_DEVICE_ATTR_RO(in13_highest, powr1220_max, VCCINP); 233 234 static SENSOR_DEVICE_ATTR_RO(in0_label, powr1220_label, VMON1); 235 static SENSOR_DEVICE_ATTR_RO(in1_label, powr1220_label, VMON2); 236 static SENSOR_DEVICE_ATTR_RO(in2_label, powr1220_label, VMON3); 237 static SENSOR_DEVICE_ATTR_RO(in3_label, powr1220_label, VMON4); 238 static SENSOR_DEVICE_ATTR_RO(in4_label, powr1220_label, VMON5); 239 static SENSOR_DEVICE_ATTR_RO(in5_label, powr1220_label, VMON6); 240 static SENSOR_DEVICE_ATTR_RO(in6_label, powr1220_label, VMON7); 241 static SENSOR_DEVICE_ATTR_RO(in7_label, powr1220_label, VMON8); 242 static SENSOR_DEVICE_ATTR_RO(in8_label, powr1220_label, VMON9); 243 static SENSOR_DEVICE_ATTR_RO(in9_label, powr1220_label, VMON10); 244 static SENSOR_DEVICE_ATTR_RO(in10_label, powr1220_label, VMON11); 245 static SENSOR_DEVICE_ATTR_RO(in11_label, powr1220_label, VMON12); 246 static SENSOR_DEVICE_ATTR_RO(in12_label, powr1220_label, VCCA); 247 static SENSOR_DEVICE_ATTR_RO(in13_label, powr1220_label, VCCINP); 248 249 static struct attribute *powr1220_attrs[] = { 250 &sensor_dev_attr_in0_input.dev_attr.attr, 251 &sensor_dev_attr_in1_input.dev_attr.attr, 252 &sensor_dev_attr_in2_input.dev_attr.attr, 253 &sensor_dev_attr_in3_input.dev_attr.attr, 254 &sensor_dev_attr_in4_input.dev_attr.attr, 255 &sensor_dev_attr_in5_input.dev_attr.attr, 256 &sensor_dev_attr_in6_input.dev_attr.attr, 257 &sensor_dev_attr_in7_input.dev_attr.attr, 258 &sensor_dev_attr_in8_input.dev_attr.attr, 259 &sensor_dev_attr_in9_input.dev_attr.attr, 260 &sensor_dev_attr_in10_input.dev_attr.attr, 261 &sensor_dev_attr_in11_input.dev_attr.attr, 262 &sensor_dev_attr_in12_input.dev_attr.attr, 263 &sensor_dev_attr_in13_input.dev_attr.attr, 264 265 &sensor_dev_attr_in0_highest.dev_attr.attr, 266 &sensor_dev_attr_in1_highest.dev_attr.attr, 267 &sensor_dev_attr_in2_highest.dev_attr.attr, 268 &sensor_dev_attr_in3_highest.dev_attr.attr, 269 &sensor_dev_attr_in4_highest.dev_attr.attr, 270 &sensor_dev_attr_in5_highest.dev_attr.attr, 271 &sensor_dev_attr_in6_highest.dev_attr.attr, 272 &sensor_dev_attr_in7_highest.dev_attr.attr, 273 &sensor_dev_attr_in8_highest.dev_attr.attr, 274 &sensor_dev_attr_in9_highest.dev_attr.attr, 275 &sensor_dev_attr_in10_highest.dev_attr.attr, 276 &sensor_dev_attr_in11_highest.dev_attr.attr, 277 &sensor_dev_attr_in12_highest.dev_attr.attr, 278 &sensor_dev_attr_in13_highest.dev_attr.attr, 279 280 &sensor_dev_attr_in0_label.dev_attr.attr, 281 &sensor_dev_attr_in1_label.dev_attr.attr, 282 &sensor_dev_attr_in2_label.dev_attr.attr, 283 &sensor_dev_attr_in3_label.dev_attr.attr, 284 &sensor_dev_attr_in4_label.dev_attr.attr, 285 &sensor_dev_attr_in5_label.dev_attr.attr, 286 &sensor_dev_attr_in6_label.dev_attr.attr, 287 &sensor_dev_attr_in7_label.dev_attr.attr, 288 &sensor_dev_attr_in8_label.dev_attr.attr, 289 &sensor_dev_attr_in9_label.dev_attr.attr, 290 &sensor_dev_attr_in10_label.dev_attr.attr, 291 &sensor_dev_attr_in11_label.dev_attr.attr, 292 &sensor_dev_attr_in12_label.dev_attr.attr, 293 &sensor_dev_attr_in13_label.dev_attr.attr, 294 295 NULL 296 }; 297 298 ATTRIBUTE_GROUPS(powr1220); 299 300 static int powr1220_probe(struct i2c_client *client) 301 { 302 struct powr1220_data *data; 303 struct device *hwmon_dev; 304 305 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 306 return -ENODEV; 307 308 data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); 309 if (!data) 310 return -ENOMEM; 311 312 mutex_init(&data->update_lock); 313 data->client = client; 314 315 hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, 316 client->name, data, powr1220_groups); 317 318 return PTR_ERR_OR_ZERO(hwmon_dev); 319 } 320 321 static const struct i2c_device_id powr1220_ids[] = { 322 { "powr1220", 0, }, 323 { } 324 }; 325 326 MODULE_DEVICE_TABLE(i2c, powr1220_ids); 327 328 static struct i2c_driver powr1220_driver = { 329 .class = I2C_CLASS_HWMON, 330 .driver = { 331 .name = "powr1220", 332 }, 333 .probe_new = powr1220_probe, 334 .id_table = powr1220_ids, 335 }; 336 337 module_i2c_driver(powr1220_driver); 338 339 MODULE_AUTHOR("Scott Kanowitz"); 340 MODULE_DESCRIPTION("POWR1220 driver"); 341 MODULE_LICENSE("GPL"); 342