1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Hardware monitoring driver for ZL6100 and compatibles 4 * 5 * Copyright (c) 2011 Ericsson AB. 6 * Copyright (c) 2012 Guenter Roeck 7 */ 8 9 #include <linux/bitops.h> 10 #include <linux/kernel.h> 11 #include <linux/module.h> 12 #include <linux/init.h> 13 #include <linux/err.h> 14 #include <linux/slab.h> 15 #include <linux/i2c.h> 16 #include <linux/ktime.h> 17 #include <linux/delay.h> 18 #include "pmbus.h" 19 20 enum chips { zl2004, zl2005, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105, 21 zl9101, zl9117 }; 22 23 struct zl6100_data { 24 int id; 25 ktime_t access; /* chip access time */ 26 int delay; /* Delay between chip accesses in uS */ 27 struct pmbus_driver_info info; 28 }; 29 30 #define to_zl6100_data(x) container_of(x, struct zl6100_data, info) 31 32 #define ZL6100_MFR_CONFIG 0xd0 33 #define ZL6100_DEVICE_ID 0xe4 34 35 #define ZL6100_MFR_XTEMP_ENABLE BIT(7) 36 37 #define MFR_VMON_OV_FAULT_LIMIT 0xf5 38 #define MFR_VMON_UV_FAULT_LIMIT 0xf6 39 #define MFR_READ_VMON 0xf7 40 41 #define VMON_UV_WARNING BIT(5) 42 #define VMON_OV_WARNING BIT(4) 43 #define VMON_UV_FAULT BIT(1) 44 #define VMON_OV_FAULT BIT(0) 45 46 #define ZL6100_WAIT_TIME 1000 /* uS */ 47 48 static ushort delay = ZL6100_WAIT_TIME; 49 module_param(delay, ushort, 0644); 50 MODULE_PARM_DESC(delay, "Delay between chip accesses in uS"); 51 52 /* Convert linear sensor value to milli-units */ 53 static long zl6100_l2d(s16 l) 54 { 55 s16 exponent; 56 s32 mantissa; 57 long val; 58 59 exponent = l >> 11; 60 mantissa = ((s16)((l & 0x7ff) << 5)) >> 5; 61 62 val = mantissa; 63 64 /* scale result to milli-units */ 65 val = val * 1000L; 66 67 if (exponent >= 0) 68 val <<= exponent; 69 else 70 val >>= -exponent; 71 72 return val; 73 } 74 75 #define MAX_MANTISSA (1023 * 1000) 76 #define MIN_MANTISSA (511 * 1000) 77 78 static u16 zl6100_d2l(long val) 79 { 80 s16 exponent = 0, mantissa; 81 bool negative = false; 82 83 /* simple case */ 84 if (val == 0) 85 return 0; 86 87 if (val < 0) { 88 negative = true; 89 val = -val; 90 } 91 92 /* Reduce large mantissa until it fits into 10 bit */ 93 while (val >= MAX_MANTISSA && exponent < 15) { 94 exponent++; 95 val >>= 1; 96 } 97 /* Increase small mantissa to improve precision */ 98 while (val < MIN_MANTISSA && exponent > -15) { 99 exponent--; 100 val <<= 1; 101 } 102 103 /* Convert mantissa from milli-units to units */ 104 mantissa = DIV_ROUND_CLOSEST(val, 1000); 105 106 /* Ensure that resulting number is within range */ 107 if (mantissa > 0x3ff) 108 mantissa = 0x3ff; 109 110 /* restore sign */ 111 if (negative) 112 mantissa = -mantissa; 113 114 /* Convert to 5 bit exponent, 11 bit mantissa */ 115 return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800); 116 } 117 118 /* Some chips need a delay between accesses */ 119 static inline void zl6100_wait(const struct zl6100_data *data) 120 { 121 if (data->delay) { 122 s64 delta = ktime_us_delta(ktime_get(), data->access); 123 if (delta < data->delay) 124 udelay(data->delay - delta); 125 } 126 } 127 128 static int zl6100_read_word_data(struct i2c_client *client, int page, 129 int phase, int reg) 130 { 131 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 132 struct zl6100_data *data = to_zl6100_data(info); 133 int ret, vreg; 134 135 if (page > 0) 136 return -ENXIO; 137 138 if (data->id == zl2005) { 139 /* 140 * Limit register detection is not reliable on ZL2005. 141 * Make sure registers are not erroneously detected. 142 */ 143 switch (reg) { 144 case PMBUS_VOUT_OV_WARN_LIMIT: 145 case PMBUS_VOUT_UV_WARN_LIMIT: 146 case PMBUS_IOUT_OC_WARN_LIMIT: 147 return -ENXIO; 148 } 149 } 150 151 switch (reg) { 152 case PMBUS_VIRT_READ_VMON: 153 vreg = MFR_READ_VMON; 154 break; 155 case PMBUS_VIRT_VMON_OV_WARN_LIMIT: 156 case PMBUS_VIRT_VMON_OV_FAULT_LIMIT: 157 vreg = MFR_VMON_OV_FAULT_LIMIT; 158 break; 159 case PMBUS_VIRT_VMON_UV_WARN_LIMIT: 160 case PMBUS_VIRT_VMON_UV_FAULT_LIMIT: 161 vreg = MFR_VMON_UV_FAULT_LIMIT; 162 break; 163 default: 164 if (reg >= PMBUS_VIRT_BASE) 165 return -ENXIO; 166 vreg = reg; 167 break; 168 } 169 170 zl6100_wait(data); 171 ret = pmbus_read_word_data(client, page, phase, vreg); 172 data->access = ktime_get(); 173 if (ret < 0) 174 return ret; 175 176 switch (reg) { 177 case PMBUS_VIRT_VMON_OV_WARN_LIMIT: 178 ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 9, 10)); 179 break; 180 case PMBUS_VIRT_VMON_UV_WARN_LIMIT: 181 ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 11, 10)); 182 break; 183 } 184 185 return ret; 186 } 187 188 static int zl6100_read_byte_data(struct i2c_client *client, int page, int reg) 189 { 190 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 191 struct zl6100_data *data = to_zl6100_data(info); 192 int ret, status; 193 194 if (page > 0) 195 return -ENXIO; 196 197 zl6100_wait(data); 198 199 switch (reg) { 200 case PMBUS_VIRT_STATUS_VMON: 201 ret = pmbus_read_byte_data(client, 0, 202 PMBUS_STATUS_MFR_SPECIFIC); 203 if (ret < 0) 204 break; 205 206 status = 0; 207 if (ret & VMON_UV_WARNING) 208 status |= PB_VOLTAGE_UV_WARNING; 209 if (ret & VMON_OV_WARNING) 210 status |= PB_VOLTAGE_OV_WARNING; 211 if (ret & VMON_UV_FAULT) 212 status |= PB_VOLTAGE_UV_FAULT; 213 if (ret & VMON_OV_FAULT) 214 status |= PB_VOLTAGE_OV_FAULT; 215 ret = status; 216 break; 217 default: 218 ret = pmbus_read_byte_data(client, page, reg); 219 break; 220 } 221 data->access = ktime_get(); 222 223 return ret; 224 } 225 226 static int zl6100_write_word_data(struct i2c_client *client, int page, int reg, 227 u16 word) 228 { 229 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 230 struct zl6100_data *data = to_zl6100_data(info); 231 int ret, vreg; 232 233 if (page > 0) 234 return -ENXIO; 235 236 switch (reg) { 237 case PMBUS_VIRT_VMON_OV_WARN_LIMIT: 238 word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 9)); 239 vreg = MFR_VMON_OV_FAULT_LIMIT; 240 pmbus_clear_cache(client); 241 break; 242 case PMBUS_VIRT_VMON_OV_FAULT_LIMIT: 243 vreg = MFR_VMON_OV_FAULT_LIMIT; 244 pmbus_clear_cache(client); 245 break; 246 case PMBUS_VIRT_VMON_UV_WARN_LIMIT: 247 word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 11)); 248 vreg = MFR_VMON_UV_FAULT_LIMIT; 249 pmbus_clear_cache(client); 250 break; 251 case PMBUS_VIRT_VMON_UV_FAULT_LIMIT: 252 vreg = MFR_VMON_UV_FAULT_LIMIT; 253 pmbus_clear_cache(client); 254 break; 255 default: 256 if (reg >= PMBUS_VIRT_BASE) 257 return -ENXIO; 258 vreg = reg; 259 } 260 261 zl6100_wait(data); 262 ret = pmbus_write_word_data(client, page, vreg, word); 263 data->access = ktime_get(); 264 265 return ret; 266 } 267 268 static int zl6100_write_byte(struct i2c_client *client, int page, u8 value) 269 { 270 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 271 struct zl6100_data *data = to_zl6100_data(info); 272 int ret; 273 274 if (page > 0) 275 return -ENXIO; 276 277 zl6100_wait(data); 278 ret = pmbus_write_byte(client, page, value); 279 data->access = ktime_get(); 280 281 return ret; 282 } 283 284 static const struct i2c_device_id zl6100_id[] = { 285 {"bmr450", zl2005}, 286 {"bmr451", zl2005}, 287 {"bmr462", zl2008}, 288 {"bmr463", zl2008}, 289 {"bmr464", zl2008}, 290 {"zl2004", zl2004}, 291 {"zl2005", zl2005}, 292 {"zl2006", zl2006}, 293 {"zl2008", zl2008}, 294 {"zl2105", zl2105}, 295 {"zl2106", zl2106}, 296 {"zl6100", zl6100}, 297 {"zl6105", zl6105}, 298 {"zl9101", zl9101}, 299 {"zl9117", zl9117}, 300 { } 301 }; 302 MODULE_DEVICE_TABLE(i2c, zl6100_id); 303 304 static int zl6100_probe(struct i2c_client *client) 305 { 306 int ret; 307 struct zl6100_data *data; 308 struct pmbus_driver_info *info; 309 u8 device_id[I2C_SMBUS_BLOCK_MAX + 1]; 310 const struct i2c_device_id *mid; 311 312 if (!i2c_check_functionality(client->adapter, 313 I2C_FUNC_SMBUS_READ_WORD_DATA 314 | I2C_FUNC_SMBUS_READ_BLOCK_DATA)) 315 return -ENODEV; 316 317 ret = i2c_smbus_read_block_data(client, ZL6100_DEVICE_ID, 318 device_id); 319 if (ret < 0) { 320 dev_err(&client->dev, "Failed to read device ID\n"); 321 return ret; 322 } 323 device_id[ret] = '\0'; 324 dev_info(&client->dev, "Device ID %s\n", device_id); 325 326 mid = NULL; 327 for (mid = zl6100_id; mid->name[0]; mid++) { 328 if (!strncasecmp(mid->name, device_id, strlen(mid->name))) 329 break; 330 } 331 if (!mid->name[0]) { 332 dev_err(&client->dev, "Unsupported device\n"); 333 return -ENODEV; 334 } 335 if (strcmp(client->name, mid->name) != 0) 336 dev_notice(&client->dev, 337 "Device mismatch: Configured %s, detected %s\n", 338 client->name, mid->name); 339 340 data = devm_kzalloc(&client->dev, sizeof(struct zl6100_data), 341 GFP_KERNEL); 342 if (!data) 343 return -ENOMEM; 344 345 data->id = mid->driver_data; 346 347 /* 348 * According to information from the chip vendor, all currently 349 * supported chips are known to require a wait time between I2C 350 * accesses. 351 */ 352 data->delay = delay; 353 354 /* 355 * Since there was a direct I2C device access above, wait before 356 * accessing the chip again. 357 */ 358 data->access = ktime_get(); 359 zl6100_wait(data); 360 361 info = &data->info; 362 363 info->pages = 1; 364 info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT 365 | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT 366 | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT 367 | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; 368 369 /* 370 * ZL2004, ZL9101M, and ZL9117M support monitoring an extra voltage 371 * (VMON for ZL2004, VDRV for ZL9101M and ZL9117M). Report it as vmon. 372 */ 373 if (data->id == zl2004 || data->id == zl9101 || data->id == zl9117) 374 info->func[0] |= PMBUS_HAVE_VMON | PMBUS_HAVE_STATUS_VMON; 375 376 ret = i2c_smbus_read_word_data(client, ZL6100_MFR_CONFIG); 377 if (ret < 0) 378 return ret; 379 380 if (ret & ZL6100_MFR_XTEMP_ENABLE) 381 info->func[0] |= PMBUS_HAVE_TEMP2; 382 383 data->access = ktime_get(); 384 zl6100_wait(data); 385 386 info->read_word_data = zl6100_read_word_data; 387 info->read_byte_data = zl6100_read_byte_data; 388 info->write_word_data = zl6100_write_word_data; 389 info->write_byte = zl6100_write_byte; 390 391 return pmbus_do_probe(client, info); 392 } 393 394 static struct i2c_driver zl6100_driver = { 395 .driver = { 396 .name = "zl6100", 397 }, 398 .probe_new = zl6100_probe, 399 .id_table = zl6100_id, 400 }; 401 402 module_i2c_driver(zl6100_driver); 403 404 MODULE_AUTHOR("Guenter Roeck"); 405 MODULE_DESCRIPTION("PMBus driver for ZL6100 and compatibles"); 406 MODULE_LICENSE("GPL"); 407